"Bo Peng,Jinchuan Jie,Jia Sun,Qing Liu,Xianlong Wang,Zidi Hang,Haimin Ding,Shinji Muraishi,Tingju Li","Synergistic deformation and fracture behavior of heterostructure Cu/1010 steel bimetal laminated composites",,"Materials Science and Engineering: A",,"Volume 888","No. 17","page 145835",2023,Oct.
"Shinji Muraishi","Micromechanics analysis of Internal stress caused by precipitate and dislocation microstructure","Global Conference on Innovation Materials 2023(GCIM2023)",,,,,,2023,June
"Shinji Muraishi","Dislocation interaction of misfitting precipitates in Aluminum  alloys","Joint Workshop on Education and Research for Materials  Science and Technology",,,,,,2023,May
"原巧,村石信二","応力時効したAl-Mg-Si合金の析出組織と強度に及ぼす応力負荷時間の影響","日本金属学会2022秋季大会",,,,,,2022,Sept.
"LiuJianbin,村石信二","<001>棒状析出物と転位の相互作用の転位動力学シミュレーション","日本金属学会 2022秋季大会",,,,,,2022,Sept.
"Yuji TAKEHARA,Yuki ITO,Thai Ha NGUYEN,Yohei HARADA,Shinji MURAISHI,Shinji KUMAI","Effect of homogenization heat treatment on elongation anisotropy in cold-rolled and annealed Al-Si alloy sheets fabricated from vertical-type high-speed twinroll cast strips","ICAA18",,,,,,2022,Sept.
"Shinji MURAISHI,Jianbin LIU","Dislocation dynamics simulation of precipitation hardening by <001> rod-shaped precipitates in aluminum alloys","ICAA18",,,,,,2022,Sept.
"Haiwei Zheng,Jianbin Liu,Shinji Muraishi","Interaction between dislocation and {001} oblate misfit precipitate through parametric dislocation dynamics (PDD) simulation","ICAA18",,,,,,2022,Sept.
"Shingo KAJIMURA,Seina KUROTATSU,Thai Ha NGUYEN,Yohei HARADA,Shinji MURAISHI,Shinji KUMAI","Effect of nozzle shape on periodic surface patterns of Al-3 mass% Si alloy strips fabricated by vertical-type high-speed twin-roll casting","ICAA18",,,,,,2022,Sept.
"Thai Ha Nguyen,Ram Song,Yohei Harada,Shinji Muraishi,Shinji Kumai","Effect of Large Particles in Central Band of Al?4%Mn?1%Si High-Speed Twin-Roll Cast Strip on Elongation of Cold-Rolled and Annealed Sheets",,"Materials Transactions",,"Vol. 63","No. 9","pp. 1248 to 1257",2022,Aug.
"Jianbin Liu,Shinji Muraishi","Orientation Dependent Hardening by <001> Rod-Shaped Misfitting Precipitates in Aluminium Alloys",,"Materials","MDPI","vol. 15","Issue 4","Page 1380",2022,Feb.
"村石信二","微小力学試験による 金属バルク･薄膜材料の表面分析","ヘテロ界面制御部会 第８回研究会","ヘテロ界面制御部会 第８回研究会資料 「ヘテロ構造材料中の界面の構造および組織制御技術」",,,,,2022,Jan.
"Jianbin Liu,Shinji Muraishi","Dislocation Dynamics Simulation of Strengthening by Fine Misfit Precipitates in Age-Hardenable Aluminum Alloys","IUMRS-ICA2021",,,,,,2021,Oct.
"Haiwei Zheng,Jianbin Liu,Shinji Muraishi","Dislocation topological evolution and energy analysis in misfit hardening of spherical precipitate by the parametric dislocation dynamics simulation",,"Materials",,"vol. 14",,"Page 6368",2021,Oct.
"Shinji Muraishi","Internal Stress and Dislocation Interaction of Plate‐Shaped Misfitting Precipitates in Aluminum Alloys",,"Materials",,"vol. 14",,"Page 5811",2021,Oct.
"Liu Jianbin,村石 信二","{111}板状析出物と転位の相互作用の転位動力学シミュレーション","日本金属学会 2021秋期第169回講演大会",,,,,,2021,Sept.
"Li Jiedi,Muraishi Shinji,KUmai Shinji","Experimental and Numerical Analyses of Cooling and Intermediate Layer Formation Process at the Magnetic Pulse Welded Al/Fe Joint Interface",,"MATERIALS TRANSACTIONS",,"vol. 62","no. 9","pp. 1376-1385",2021,Sept.
"Jiedi Li,Shinji Muraishi,SHINJI KUMAI","Experimental and Numerical Analyses of Wavy Interface Formation and Local Melting Phenomena at the Magnetic Pulse Welded Al/Fe Joint Interface",,"MATERIALS TRANSACTIONS",,"vol. 62","no. 8","pp. 1184-1193",2021,Aug.
"Jianbin Liu,Shinji Muraishi","Orientation dependent hardening of {111} plate precipitate by parametric dislocation dynamics",,"Mechanics of Materials",,"vol. 160",,"page 103968",2021,June
"SungJin Park,Shinji Muraishi","Micromechanical analysis of residual stress around coarse precipitates under cold rolling condition",,"Mechanics of Materials",,"Volume 157",,"Page 103841",2021,Mar.
"SungJin Park,Shinji Muraishi","Influence of Residual Stress Around Constituent Particles on Recrystallization and Grain Growth in Al-Mn-Based Alloy during Annealing",,"Materials",,"vol. 14",,"page 1701",2021,Mar.
"Maya Okihara,Shinji Muraishi,SHINJI KUMAI","Welding Interface of MPWed Aluminum Plates with Different Hardness","14th International Aluminium Conference (INALCO2019)","Proceedings of 14th International Aluminium Conference (INALCO2019)",,,,,2020,Nov.
"丸野瞬,吉野路英,岩尾祥平,Nguyen Thai Ha,原田陽平,村石信二,熊井真次","高速双ロール鋳造を用いたAl-高Mn-Si系合金の機械的性質に及ぼす分散粒子の分布状態の影響","（一社）軽金属学会 第139回秋期大会","講演概要集",,,,"pp. 51-52",2020,Nov.
"T. Ha. Nguyen,R. Song,Y. Harada,S. Muraishi,S. Kumai,S. Maruno,M. Yoshino,S. Iwao","Microstructure and mechanical properties of high-manganese-containing high-speed twin-roll cast Al-Mn-Si alloy strips and their cold-rolled sheets","ICAA17 (The 17th International Conference on Aluminum Alloys)",,,,,,2020,Oct.
"朴聖鎭,村石信二","冷間圧延により強加工されたAA3003 アルミニウム合金の再結晶挙動に及ぼす均質化条件の影響","日本金属学会秋期講演大会（第167回）",,,,,,2020,Sept.
"朴 聖鎭,村石 信二,原田 陽平,熊井 真次","90％冷間圧延したAA3003アルミニウム合金の粒界3重点の移動による回復挙動","軽金属学会第138回春季講演大会",,,,,,2020,May
"丸野瞬,吉野路英,岩尾祥平,Nguyen Thai Ha,原田陽平,村石信二,熊井真次","高速双ロール鋳造を用いたAl-高Mn-Si系合金フィン材の機械的特性","（一社）軽金属学会 第138回春期大会",,,,,,2020,May
"Shinji Muraishi,Minoru Taya","Eshelby problem in continuous shape transition of helical inclusion",,"International Journal of Solids and Structures",,,,,2020,May
"Liu Jianbin,Shinji Muraishi","Dislocation dynamics simulations of dislocation-particle bypass mechanisms","ICPMAT","Materials Science Forum",,"vol. 985",,"pp. 35-41",2020,Mar.
"村石信二,田谷稔","ヘリカル介在物の形状変化と平均Eshelbyテンソル","日本金属学会 2020春期大会","日本金属学会 2020春期（第166回）講演大会概要",,,,"page 9",2020,Mar.
"Jianbin Liu,Shinji Muraishi","Energy analysis of misfit hardening by parametric dislocation dynamics simulation",,"Computational Materials Science",,,,,2020,Mar.
"Shinji Muraishi,Liu Jianbin","Micromechanical analysis of dislocation and precipitate interctions in aluminum alloys","ICPMAT2018","Materials Science Forum",,"vol. 985",,"pp. 23-28",2020,Mar.
"Takashi Kambe,Yasutaka Kedo,Shinji Muraishi,SHINJI KUMAI","Experimental and Numerical Analyses of Magnetic Pulse Forming of A1050 Aluminum Sheet",,"Materials Transactions",,"Vol. 61","No. 2","pp. 346-354",2020,Feb.
"Shinji Muraishi","Analysis of elastic field of helical inclusion","2019 Tokyo tech-Dalian University of Technology Joint Workshop on Advanced Materials","Abstrackt book of 2019 Tokyo tech-Dalian University of Technology Joint Workshop on Advanced Materials",,,,,2019,Nov.
"Weng Yaoyao,Ding Lipeng,Zhang Zezhong,Jia Zhihong,Wen Boyang,Liu Yingying,Muraishi Shinji,Li Yanjun,Liu Qing","Effect of Ag addition on the precipitation evolution and interfacial segregation for Al-Mg-Si alloy",,"Acta Materialia",,"Vol. 180",,"pp. 301-316",2019,Nov.
"Jianbin Liu,Shinji Muraishi","Dislocation dynamics analysis of dislocation-particle bypassing process","2019 Tokyo tech-Dalian University of Technology Joint Workshop on Advanced Materials","Abstract book of 2019 Tokyo tech-Dalian University of Technology Joint Workshop on Advanced Materials",,,,,2019,Nov.
"沖原麻耶,村石信二,熊井真次","調質の異なる1050アルミニウム板の電磁圧接界面","軽金属学会 第137回秋期講演大会","軽金属学会 第137回秋期講演大会講演概要集",,,,,2019,Nov.
"Jiedi Li,Shinji Muraishi,SHINJI KUMAI","Influence of Kinetic Parameters on Interfacial Morphology of Al/Fe Magnetic Pulse welded Joints","14th International Aluminium Conference (INALCO2019)","Proceedings of 14th International Aluminium Conference (INALCO2019)",,,,,2019,Nov.
"Takashi Kambe,Shinji Muraishi,SHINJI KUMAI","Experimental and Numerical Analysis of MPW and MPF of Al Sheet","14th International Aluminium Conference (INALCO2019)","Proceedings of 14th International Aluminium Conference (INALCO2019)",,,,,2019,Nov.
"沖原麻耶,村石信二,熊井真次","調質の異なる1050アルミニウム板の電磁圧接界面","軽金属学会第137回秋期講演大会","軽金属学会第137回秋期講演大会講演概要",,,,,2019,Nov.
"木村慎吾,村石信二,熊井真次","Al/CuおよびAl/Niの電磁圧接界面における類似点と相違点","軽金属学会第137回秋期講演大会","軽金属学会第137回秋期講演大会講演概要",,,,,2019,Nov.
"Maya Okihara,Shinji Muraishi,Shinji Kumai","Welding Interface of MPWed Aluminium Plates with Different Hardness",,"Proceedings of the 14th International Aluminium Conference (INALCO2019)",,,,,2019,Nov.
"Jiedi Li,Shinji Muraishi,Shinji Kumai","Influence of Kinetic Parameters on Interface Formation of Al/Fe Magnetic Pulse Welded Joints",,"Proceedings of the 14th International Aluminium Conference (INALCO2019)",,,,,2019,Nov.
"Takashi Kambe,Shinji Muraishi,Shinji Kumai","Experimental and Numerical Analysis of MPW and MPF of Al Sheet",,"The 14th International Aluminium Conference (INALCO2019)",,,,,2019,Nov.
"Shingo Kimura,Shinji Muraishi,SHINJI KUMAI","Numerical Analysis of Wavy Interface Formation in MPWed Al/Cu Joint","14th International Aluminium Conference (INALCO2019)","Proceedings of 14th International Aluminium Conference (INALCO2019)",,,,,2019,Nov.
"Shinji Muraishi,Minoru Taya","Eshelby tensor of helical inclusion","Symposium honoring the 75th Birthday of Professor Minoru Taya : Bioinspired Material Design, Active and Sensing Materials, Composites, Shape Memory Alloys, Scalable Processing, Micro-/Nano-robotics, and Energy harvesting/storage Materials and System.","Abstracts of symposium honoring the 75th Birthday of Professor Minoru Taya",,,,"pp. 48-49",2019,Oct.
"SungJin Park,Shinji Muraishi","Effect of reduction rate on the recrystallization behavior in AA3003 aluminum alloy fabricated by DC casting","ICPMAT2019 (14th International Conference on the Physical Properties and Application of Advanced Materials)","Materials Science Forum",,"Vol. 1034",,"pp. 17-22",2019,Sept.
"村石信二,田谷稔","ヘリカル介在物の平均Eshelbyテンソルと弾性場","2019年秋期講演（第165回）大会プログラム",,,,,,2019,Sept.
"村石信二","ミクロな転位運動からマクロな塑性変形挙動を理解する","『高強度金属材料の機能発現機構 ー転位論の基礎から材料強度化までー』",,,,,"Page 1-1 ? 1-14",2019,Sept.
"Ryo Muramatsu,Shinji Muraishi,Shinji Kumai","Indentation Microstructure and Stress Analysis of Age-Hardenable 7050 Aluminum Alloy","The 10th Pacific Rim International Conference on Advanced Materials and Processing",,,,,,2019,Aug.
"Jianbin Liu,Shinji Muraishi","Energy analysis on dislocation-particle bypassing process by dislocation dynamics simulation","The 10th Pacific Rim International Conference on Advanced Materials and Processing",,,,,,2019,Aug.
"Shinji Muraishi,Jianbin Liu","Micromechanics Based Precipitation Hardening Analysis in Aluminum Alloys","The 10th Pacific Rim International Conference on Advanced Materials and Processing",,,,,,2019,Aug.
"Yuta Sano,Shinji Muraishi,Yohei Harada,Shinji Kumai","Effect of GP(I) and GP(II) Zones on Precipitation Microstructure and Hardness in A7050 Aluminum Alloy by Means of Two Step Aging","The 10th Pacific Rim International Conference on Advanced Materials and Processing",,,,,,2019,Aug.
"Shinji Muraishi,Minoru Taya","Average Eshelby tensor and elastic field for helical inclusion problems",,"International jounal of solids and structures",,"Volume 180-181","No. 15","Page 125-136",2019,July
"高山雄介,原田陽平,村石信二,熊井真次","タンデム式縦型高速双ロールキャスト法により作製したA3003/A4045クラッド材界面の接合状態",,"鋳造工学",,"Vol. 91","No. 7","pp. 420-426",2019,July
"神戸貴史,村石信二,熊井真次","電磁成形および電磁圧接したアルミニウム板の組織変化と熱履歴の数値解析","軽金属溶接協会 年次講演大会","軽金属溶接協会 年次講演大会講演概要集",,,,,2019,June
"神戸貴史,村石信二,熊井真次","電磁成形および電磁圧接したアルミニウム板の組織変化と熱履歴の数値解析","軽金属溶接協会年次講演大会","軽金属溶接協会年次講演大会概要",,,,,2019,June
"神戸貴史,村石信二,熊井真次","電磁成形したアルミニウム板の最表面に形成される高速変形組織と変形挙動の数値解析","軽金属学会第136回春期講演大会","軽金属学会第136回春期講演大会講演概要",,,,,2019,May
"木村慎吾,村石信二,熊井真次","Al/Cu電磁圧接界面形態に及ぼす衝突角度の影響","軽金属学会第136回春期講演大会","軽金属学会第136回春期講演大会講演概要",,,,,2019,May
"木村慎吾,村石信二,熊井真次","Al/Cu電磁圧接界面形態に及ぼす衝突角度の影響","軽金属学会 第136回春期講演大会","軽金属学会 第136回春期講演大会講演概要集",,,,,2019,May
"神戸貴史,村石信二,熊井真次","電磁成形したアルミニウム板の最表面に生成される高速変形組織と変形挙動の数値解析","軽金属学会 第136回春期講演大会","軽金属学会 第136回春期講演大会講演概要集",,,,,2019,May
"李 傑迪,村石信二,熊井真次","運動量パラメーターがAl-Fe電磁圧接界面に生成する中間層と温度履歴に及ぼす影響","軽金属学会 第136回春期講演大会","軽金属学会 第136回春期講演大会講演概要集",,,,,2019,May
"LiJiedi,村石信二,熊井真次","運動量パラメータ―がAl-Fe電磁圧接界面に生成する中間層と温度履歴に及ぼす影響","軽金属学会第136回春期講演大会","軽金属学会第136回春期講演大会講演概要",,,,,2019,May
"Satoshi Yamamoto,Satomi Takao,Shinji Muraishi,Cheng Xu,Minoru Taya","synthesis of Fe70Pd30 nanoparticles and their surface modification by zwitterionic linker",,"Materials chemistry and physics",,"vol. 234",,"pp. 237-244",2019,May
"Thai Ha Nguyen,Ram Song,Yohei Harada,Shinji Muraishi,Shinji Kumai","Castability and microstructural evolution of high manganese-containing Al-Mn-Si alloys fabricated by vertical-type high-speed twin-roll casting","（一社）軽金属学会 第136回春期大会","講演概要集",,,,"pp. 269-270",2019,May
"佐野悠太,村石信二,原田陽平,熊井真次","A7050アルミニウム合金の時効析出挙動に及ぼす予備時効後の成形加工と2段目時効の効果","（一社）軽金属学会 第136回春期大会","講演概要集",,,,"pp. 19-20",2019,May
"村松遼,村石信二,原田陽平,熊井真次","A7050析出強化型アルミニウム合金のナノインデンテーションによる微細組織と応力解析","（一社）軽金属学会 第136回春期大会","講演概要集",,,,"pp. 345-346",2019,May
"Lipeng Ding,Andrey Orekhov,Yaoyao Weng,Zhihong Jia,Hosni Idrissi,Dominique Schryvers,Shinji Muraishi,Longlong Hao,Qing Liu","Study of the Q' (Q)-phase precipitation in Al-Mg-Si-Cu alloys by quantification of atomic-resolution transmission electron microscopy images and atom probe tomography",,"Journal of Materials Science","Springer",,,"pp. 1-10",2019,Feb.
"木村慎吾,村石信二,熊井真次","Al/CuおよびAl/Niの電磁圧接界面における相違点と類似点","軽金属学会 第137回秋期講演大会","軽金属学会 第137回秋期講演大会講演概要集",,,,,2019,
"Nguyenha,Ram Song,Kazuho Otsuka,Yohei Harada,Shinji Muraishi,SHINJI KUMAI","Mechanical properties of high manganese-containing 3xxx aluminum alloy sheets fabricated from high-speed twin-roll cast strips","（一社）軽金属学会 第135回秋期大会","講演概要集",,,,"pp. 497-498",2018,Nov.
"佐野悠太,原田陽平,村石信二,熊井真次","A7050アルミニウム合金の時効処理に伴う析出組織と硬さ変化に及ぼす二段時効の効果","（一社）軽金属学会 第135回秋期大会","講演概要集",,,,"pp. 433-434",2018,Nov.
"沖原麻耶,村石信二,熊井真次","調質の異なるアルミニウム板を用いた電磁圧接材の接合界面","軽金属学会第135回秋期大会","軽金属学会第135回秋期大会講演概要集",,,,"pp. 81 - 82",2018,Nov.
"神戸貴史,村石信二,熊井真次","電磁圧接ならびに電磁成形したアルミニウム板の組織と変形挙動の数値解析","軽金属学会第135回秋期大会","軽金属学会第135回秋期大会講演概要集",,,,"pp. 79 - 80",2018,Nov.
"Ram Song,Shinji Muraishi,Shinji Kumai","EFFECT OF COOLING RATE ON CONSTITUENT PARTICLE FORMATION IN HIGH-SPEED TWIN-ROLL CAST Al-Mn BASED ALLOY STRIPS","The 73rd World Foundry Congress","Congress Proceedings of the 73rd World Foundry Congress",,,,"pp. 35 - 36",2018,Sept.
"Yaoyao Weng,Zhihong Jia,Lipeng Ding,Shinji Muraishi,Qing Liu","Clustering behavior during natural aging and artificial aging in Al-Mg-Si alloys with different Ag and Cu addition",,"Materials Science & Engineering A",,"Vol. 732",,"pp. 273-283",2018,July
"yaoyao WENG,Zhihong Jia,Lipeng Ding,Shinji Muraishi,Xiaozhi Wu","The multiple orientation relationships and morphology of β' phase in Al-Mg-Si-Cu alloy",,"Journal of Alloys and Compounds",,"vol. 767",,"pp. 81-89",2018,July
"李杰迪,神戸貴史,山岸大起,村石信二,熊井真次","数値解析を用いたAl/Fe電磁圧接界面に生成する中間層の再現","2018年度 軽金属溶接協会 年次講演大会",,,,,,2018,June
"Takashi Kambe,Yasutaka Kedo,Shinji Muraishi,Shinji Kumai","Numerical Analysis of Magnetic Pulse Forming and Deformation Structure of Pure Al and Cu Sheets","The 16th International Conference on Aluminium Alloys (ICAA16)","Proceedings of 2018ICAA16",,,,,2018,June
"Masatoshi Nakano,Fuxing Wan,Jian Wang,Takumi Sannomiya,Shinji Muraishi,Takashi Harumoto,Yoshio Nakamura,Ji Shi","Magnetoresistance of oxygen concentration-modulated Co-Ti-O films",,"Applied Physics A",,"Vol. 124","No. 401",,2018,June
"大塚一帆,原田陽平,村石信二,熊井真次","縦型高速双ロールキャスト材より作製したAl-1?4mass%Mn合金板の機械的特性","（一社）軽金属学会 第134回春期大会","講演概要集",,,,"pp. 307-308",2018,May
"Y. Takayama,Y. Harada,S. Muraishi,S. Kumai","Base/overlay interface of Al-Mn/Al-Si clad-strips produced by vertical-type tandem twin-roll casting","AFC14 (The 14th Asian Foundry Congress)",,,,,,2017,Nov.
"大塚一帆,原田陽平,村石信二,熊井真次","縦型高速双ロールキャスト材より作製したAl-1?4wt%Mn合金板の再結晶挙動","（一社）軽金属学会 第133回秋期大会","講演概要集",,,,"pp. 329-330",2017,Nov.
"Ram Song,原田陽平,村石信二,熊井真次","高速双ロールキャスト法によって作製したAl-Mn系合金板材内の晶出物分析","（一社）軽金属学会 第133回秋期大会","講演概要集",,,,"pp. 5-6",2017,Nov.
"R. Song,Y. Harada,S. Muraishi,S. Kumai","Microstructural analysis of dispersoids in high-speed twin-roll cast Al-Mn based alloy strip","AFC14 (The 14th Asian Foundry Congress)",,,,,,2017,Nov.
"K. Otsuka,Y. Harada,S. Muraishi,S. Kumai","Solidification process of Al-Mn alloy strips produced by high-speed twin-roll casting","AFC14 (The 14th Asian Foundry Congress)",,,,,,2017,Nov.
"毛戸康隆,神戸貴史,沖原麻耶,村石信二,熊井真次","実験ならびに数値解析によるAl/Al電磁圧接界面組織の検討","日本金属学会秋期講演大会（第161回）",,,,,,2017,Sept.
"村石信二","電気ポテンシャルに拡張した異方性グリーン関数によるPZT4/エポキシ複合材料の等価弾性率評価","日本金属学会秋期大会（第161回）",,,,,,2017,Sept.
"占部航平,西脇淳人,村石信二,熊井真次","Al/Cu異種金属接合材の電磁圧接挙動と中間層形成過程の数値解析","日本金属学会2017年秋期講演大会（第161回）","日本金属学会2017年秋期講演大会講演概要集",,,,,2017,Sept.
"熊井真次,村石信二,原田陽平,糸井貴臣,前田将克","種々の先端的高速固相接合法により作製したアルミニウム合金同種・異種接合材の組織形成ならびに接合メカニズムの解明?軽金属奨学会平成27年度統合的先端研究の成果?",,"軽金属",,"Vol. 67","No. 9","pp. 447-459",2017,Sept.
"神戸貴史,毛戸康隆,村石信二,熊井真次","電磁圧接ならびに電磁成形した純銅板の組織と変形挙動","日本金属学会秋期大会（第161回）",,,,,,2017,Sept.
"宋濫,原田陽平,村石信二,熊井真次","高速双ロールキャスト法により作製したAl-Mn系合金板材の分散相","（公社）日本鋳造工学会 第169回全国講演大会","講演概要集",,,,"p. 106",2017,May
"山岸大起,西脇淳人,村石信二,熊井真次","純アルミニウム/SS400爆発圧接界面の熱履歴と波状界面形成に及ぼす衝突条件の影響","軽金属学会第132回春期講演大会","軽金属学会第132回春期講演大会講演概要",,,,,2017,May
"高山雄介,原田陽平,村石信二,熊井真次","タンデム式縦型高速双ロールキャスト法により作製したAl-Mn/Al-Si合金クラッド材の界面接合に及ぼす芯材表面状態の影響","（公社）日本鋳造工学会 第169回全国講演大会","講演概要集",,,,"p. 108",2017,May
"M. Taya,C. Xu,T. Matsuse,Shinji Muraishi","Molecular dynamics model for nano-motions of FePd nanohelices",,"Journal of Applied Physics","AIP publishing","  121",,"  154302",2017,Apr.
"神戸貴史,毛戸康隆,西脇淳人,村石信二,熊井真次","純銅板の電磁成形挙動の解析と高速変形組織","日本金属学会2017年春期講演大会（第160回）","日本金属学会2017年春期講演大会（第160回）講演概要",,,,,2017,Mar.
"Leelachao, S.,Shinji Muraishi,YOSHIO NAKAMURA","Mechanism and its mathematical expressions of stress-induced light emission of ZnS:Mn/polyester composite",,"Key Engineering Materials",,"Vol. 728",,"pp. 252-257",2017,
"藤枝 俊,大塚 誠,村石信二,山室 佐益,梅津 理恵,大場 洋次郎,寺西 亮","社会・産業からの要求に応える電子・情報材料を目指して",,"まてりあ","公益社団法人 日本金属学会","Vol. 56","No. 3","pp. 180-180",2017,
"吉野路英,岩尾 祥平,江戸 正和,村石信二,熊井真次","ろう付処理したAl-Mn系合金の材料特性に及ぼす均質化処理およびろう付条件の影響",,"軽金属",,"Vol. 66","No. 12","pp. 652-659",2016,Dec.
"大塚一帆,原田陽平,村石信二,熊井真次","縦型高速双ロールキャスト法により急冷凝固したAl-1?4wt%Mn合金板のミクロ組織とMn固溶度","（一社）軽金属学会 第131回秋期大会","講演概要集",,,,"pp. 51-52",2016,Nov.
"高山雄介,山野花穂,成田渉,中村亮司,筒井あかり,原田陽平,村石信二,熊井真次","タンデム式縦型高速双ロールキャスト法により作製した熱交換器材料の組織とろう付特性",,"鋳造工学",,"Vol. 88","No. 10","pp. 615-623",2016,Oct.
"Y. Aizawa,J. Nishiwaki,Y. Harada,S. Muraishi,S. Kumai","Experimental and Numerical Analysis of the Formation Behavior of Intermediate Layers at Explosive Welded Al/Fe Joint Interfaces",,"Journal of Manufacturing Processes",,"Vol. 24",,"pp. 100-106",2016,Oct.
"杉山智美,原田陽平,村石信二,熊井真次","タンデム式縦型高速双ロールキャスト法により作製したAl-Cu合金/純Alクラッド材の凝固挙動","（公社）日本鋳造工学会 第168回全国講演大会","講演概要集",,,,"p. 19",2016,Sept.
"Shinji Muraishi","Efficient interpolation algorithm of electro-elastic Green’s function for boundary integral equation method and Eshelby inclusion problem",,"International Journal of Solids and Structures","Elsevier",,,,2016,Sept.
"大塚一帆,原田陽平,村石信二,熊井真次","縦型高速双ロールキャスト法により急冷凝固したAl-Mn合金板の凝固過程","（公社）日本鋳造工学会 第168回全国講演大会","講演概要集",,,,"p. 21",2016,Sept.
"菊地大輔,原田陽平,村石信二,熊井真次","縦型高速双ロールキャスト中の溶湯温度測定によるAC7A合金板表面の周期的帯状模様の形成要因の検討","（公社）日本鋳造工学会 第168回全国講演大会","講演概要集",,,,"p. 20",2016,Sept.
"R. Song,K. Otsuka,Y. Harada,S. Muraishi,S. Kumai","Microstructural characterization in high-speed twin roll cast Al-Mn based alloys strip","YFE6 (The 6th Korea-Japan Conference for Young Foundry Engineers)","Proceedings of YFE6 (The 6th Korea-Japan Conference for Young Foundry Engineers)",,,,"pp. 112-115",2016,Aug.
"D. Yamagishi,Y. Aizawa,J. Nishiwaki,Y. Harada,S. Muraishi,S. Kumai","Microstructure and thermal history of explosive welded pure aluminum / SS400 steel joint","PRICM9 (The 9th Pacific Rim International Congress on Advanced Materials and Processing)","Technical Program",,,,"p. 6",2016,Aug.
"T. Asakura,Y. Harada,S. Muraishi,S. Kumai","High-speed solid-state joining of aluminum alloy stud on aluminum-resin composite panel","PRICM9 (The 9th Pacific Rim International Congress on Advanced Materials and Processing)","Technical Program",,,,"p. 6",2016,Aug.
"Michihide Yoshino,SHOHEI IWAO,Shinji Muraishi,SHINJI KUMAI","Effect of Brazing Condition on Mechanical Property for Brazed Al-Mn Alloy","PRICM9",,,,,,2016,Aug.
"Shinji Muraishi,Takahiro Kuno,Ji Shi,YOSHIO NAKAMURA,Minoru Taya","Microstructure and Magnetic Properties of Nano-Structured Fe-","PRICM9",,,,,,2016,Aug.
"D. Kikuchi,Y. Harada,S. Muraishi,S. Kumai","Surface quality and microstructure of Al-Mg alloy strips fabricated by vertical-type high-speed twin roll casting","PRICM9 (The 9th Pacific Rim International Congress on Advanced Materials and Processing)","Technical Program",,,,"p. 29",2016,Aug.
"Y. Takayama,Y. Harada,S. Muraishi,S. Kumai","Relationship between solidification microstructure and temperature change during clad strip fabrication by using vertical-type tandem twin-roll caster","YFE6 (The 6th Korea-Japan Conference for Young Foundry Engineers)","Proceedings of YFE6 (The 6th Korea-Japan Conference for Young Foundry Engineers)",,,,"pp. 90-93",2016,Aug.
"Takashi Harumoto,Takumi Sannomiya,Shinji Muraishi,Ji Shi,Yoshio Nakamura","Disc-shaped nanocrystal model for simulating the diffraction peak profile from a one-dimensional superlattice and its application to Pt/AlN superlattice films",,"Journal of Applied Crystallography","IUCr","Vol. 49","No. 3","pp. 909?917",2016,June
"R. Song,Y. Harada,S. Muraishi,S. Kumai","Microstructural evolution of Al-Mn based alloy fabricated by vertical-type high-speed twin-roll casting","ICAA15 (The 15th International Conference on Aluminum Alloys)","Materials Science Forum",,"Vol. 877",,"pp. 51-55",2016,June
"J. Nishiwaki,T. Kambe,Y. Kedo,Y. Harada,S. Muraishi,S. Kumai","Numerical analysis of wavy interface formation and successive temperature change in magnetic pulse welded Al/Cu joint","ICAA15 (The 15th International Conference on Aluminum Alloys)","Materials Science Forum",,"Vol. 877",,"pp. 655-661",2016,June
"西脇淳人,原田陽平,村石信二,熊井真次","電磁圧接したAl/Cu接合材の波状界面の形成過程と接合界面の温度変化の数値解析","（一社）軽金属学会 第130回春期大会","講演概要集",,,,"pp. 35-36",2016,May
"Hongyu An,Takashi Harumoto,Takumi Sannomiya,Shinji Muraishi,Rong Tu,Lianmeng Zhang,Yoshio Nakamura,Ji Shi","Effect of substrate temperature on the structure and magnetic properties of CoPt/AlN multilayer films",,"Journal of Wuhan University of Technology-Mater. Sci. Ed.","Springer","Vol. 31","No. 1","pp. 44-47",2016,Feb.
"Lei Guo,Takashi Harumoto,Takumi Sannomiya,Shinji Muraishi,Yoshio Nakamura,Ji Shi","Magnetoelastically induced magnetic anisotropy transition in [CoO5nm/CoPt7nm]5 multilayer films",,"Journal of Magnetism and Magnetic Materials","Elsevier","Vol. 407",,"pp. 148?154",2016,Jan.
"春本高志,三宮工,村石信二,史蹟,中村吉男","弾性定数を用いないX 線格子ひずみの解析手法",,"まてりあ","日本金属学会","Vol. 54",,"pp. 612-615",2015,Dec.
"吉野路英,岩尾祥平,村石信二,熊井真次","ろう付加熱したAl-Mn系合金の機械的性質に及ぼす均質化処理およびろう付条件の影響","軽金属学会第129回秋期講演大会","軽金属学会第129回秋期講演大会講演概要",,,,,2015,Nov.
"Hongyu An,Jian Wang,Janos Szivos,Takashi Harumoto,Takumi Sannomiya,Shinji Muraishi,Gyorgy Safran,Yoshio Nakamura,Ji Shi","Perpendicular coercivity enhancement of CoPt/TiN films by nitrogen incorporation during deposition",,"J. Appl. Phys.","AIP Publishing LLC","Vol. 118",,"p. 203907",2015,Nov.
"相澤祐輔,西脇淳人,原田陽平,村石信二,熊井真次","Al/Fe爆発圧接界面に生成する中間層の組成と組織","（一社）軽金属学会 第129回秋期大会","講演概要集",,,,"p. 403",2015,Nov.
"山岸大起,相澤祐輔,西脇淳人,原田陽平,村石信二,熊井真次","純アルミニウム/SS400爆発圧接界面の組織と熱履歴","（一社）軽金属学会 第129回秋期大会","講演概要集",,,,"p. 305",2015,Nov.
"村石信二","ラボスケールX線を利用した材料評価技術",,"まてりあ",,"Vol. 54","no. 12","Page 601",2015,Nov.
"Sirichai Leerachao,Shinji Muraishi,Takumi Sannomiya,Ji Shi,YOSHIO NAKAMURA","Correlation of triboluminescence and contact stresses in ZnS:Mn/polymeric matrix composite",,"Journal of Luminescence","Elsevier",,"No. 170","pp. 24-29",2015,Oct.
"村石信二,久野雄大,大山尭音,史蹟,中村吉男,田谷稔","GLAD法によるFe-Pd形状記憶合金薄膜の作製とその磁気的特性の評価","日本金属学会秋期講演大会2015",,,,,,2015,Sept.
"Sirichai Leelachao,Shinji Muraishi,Takumi Sannomiya,Ji Shi,YOSHIO NAKAMURA","Mechanoluminescence of ZnS:Mn phosphors and its correlation to impact energy and contact geometry",,"Optics letters",,"Vol. 40",,"pp. 4468-4471",2015,Aug.
"原田陽平,山田洋希,村石信二,熊井真次","高速固相接合したSS400鋼スタッドと5052アルミニウム合金板の接合界面組織","（一社）軽金属学会 第128回春期大会","講演概要集",,,,"pp. 85-86",2015,May
"Takashi Harumoto,Takumi Sannomiya,Shinji Muraishi,Ji Shi,Yoshio Nakamura","Rhombohedral distortion analysis of ultra-thin Pt(111) films deposited under Ar-N2 atmosphere",,"JOURNAL OF APPLIED CRYSTALLOGRAPHY",,"Vol. 47",,"pp. 1490",2014,Oct.
"Shinji Muraishi","Formulation of Eshelby’s inclusion problem by BIEM (boundary integral equation method) and PDD (parametric dislocation dynamics)",,"Mechanics of Materials","ELSEVIER","Volume 74",,"Page 41-55",2014,July
"T. Gao,C. Zhang,T. Sannomiya,S. Muraishi,YOSHIO NAKAMURA,J. Shi","Effect of nitrogen upon structural and magnetic properties of FePt in FePt/AlN multilayer structures",,"Journal of Vacuum Science & Technology A",,,,,2014,July
"Djoko Santjojo,Tatsuhiko Aizawa,Shinji Muraishi,H.Morita","Micro-Texturing of Stainless Steels Via High density Plasma Nitriding","International conference on micromanufacturing","ICOMM 2014",,,"No. 90",,2014,Mar.
"Cong Zhang,Ryutaro Tajima,Takumi Sannomiya,Shinji Muraishi,Yoshio Nakamura,Ji Shi","Magnetic behavior of FePt/AlN layered structure",,"Materials Transactions","Tha Japan institute of Metals and Materials","Vol. 55","No. 3","pp. 473 to 476",2014,Jan.
"Zhang, C.,Takumi Sannomiya,Shinji Muraishi,Ji Shi,Nakamura, Y.","Perpendicular magnetic anisotropy in FePt/AlN layered structure",,"Applied Physics A: Materials Science and Processing",,"Vol. 116","No. 4","pp. 1695-1700",2014,
"Cong Zhang,Ji Shi,YOSHIO NAKAMURA,Shinji Muraishi,Takumi Sannomiya","Magnetic behavior of FePt/AlN Layered Structure","JIM 2013 Autumn Annual Meeting",,,,,,2013,Sept.
"中村吉男,春本高志,三宮工,村石信二,史蹟,石黒孝","プリミティブ格子によるfcc(111)高配向薄膜の構造評価法","日本金属学会 2013秋期講演大会",,,,,,2013,Sept.
"田島 隆太郎,史 蹟,中村 吉男,村石 信二,三宮 工","熱処理によるFePt/AlN 多層膜の内部応力変化","日本金属学会 2013秋期講演大会",,,,,,2013,Sept.
"村石信二","境界積分方程式法・離散化転位法によるEshelby介在物問題の評価","日本金属学会 2013秋期講演大会（金沢）",,"日本金属学会",,,,2013,Sept.
"春本高志,三宮工,村石信二,史蹟,中村吉男,石黒孝","金属下地層によるAlN薄膜の極性制御 -収差補正STEMによる観察","日本金属学会 2013秋期講演大会",,,,,,2013,Sept.
"takeshi saito,Shinji Muraishi,Calin D. Marioara,Sigmund  J. Andersen,Jostein Royset,Randi Holmestad","The effect of Low Cu Additions and Predeformation on the Precipitation in a 6060 Al-Mg-Si Alloy",,"Metallurgical and materials transactions A. Physical metallurgy and materials science","The Minerals, Metalls and Materials Society and ASM international 2013",,,,2013,Apr.
"Takashi Harumoto,Shinji Muraishi,Ji Shi,Yoshio Nakamura,Takashi Ishiguro","Insertion effect of the 3-nm-thick Co(Pt) layer on AlN preferred orientation and residual stress in the c-axis textured AlN film",,"MRS Proceedings",,"Vol. 1515",,,2013,Mar.
"T. Harumoto,T. Sannomiya,Y. Matsukawa,S. Muraishi,Ji Shi,Y. Nakamura,H. Sawada,T. Tanaka,Y. Tanishiro,K. Takayanagi","Controlled polarity of sputter-deposited aluminum nitride on metals observed by aberration corrected scanning transmission electron microscopy",,"J. Appl. Phys.",,"Vol. 113","No. 8","p. 084306",2013,Feb.
"Shinji Muraishi","Triangular dislocation loop model for indented material",,"Mechanics of materials","ELSEVIER","Vol. 56",,"pp. 106-121",2012,Oct.
"Takeshi Saito,S. Muraishi,C.D. Marioara,Randi Holmestad","Effect of Low Cu Amounts and Pre-Deformation on the Precipitation in Al-Mg-Si Alloys","13th International Conference on Aluminum Alloys","ICAA13",,,,"pp. 1063-1068",2012,June
"Takeshi Saito,Shinji Muraishi,C.D. Marioara,Randi Holmestad","Influence of low Cu amounts in combination with pre-deformation on the precipitate structures in Al-Mg-Si alloys","7th International Conference on the Physical Properties and Application of Advanced Materials","ICPMAT2012",,,,"pp. 126-129",2012,June
"Shinji Muraishi,Cheng Xu,Minoru Taya,Tadakatsu Yoshino,Takehiro Matsuse","Processing of Fe-Pd nano-particles via oxidation and reduction heating of {Fe(acac)2,Pd(acac)2,CNT} mixture","New consepts for active materials, actuators and bioinspired sensing-actuation control",,,,,"pp. 22-23",2012,Apr.
"Cai, W.,Shinji Muraishi,Ji Shi,YOSHIO NAKAMURA,Liu, W.,Yu, R.","Temperature-driven spin reorientation transition in CoPt/AlN multilayer films",,"Journal of Nanomaterials",,"Vol. 2012",,,2012,
"春本 高志,三宮工,村石 信二,史 蹟,中村 吉男,沢田英敬,田中 崇之,谷城 康眞,高柳邦夫","高配向（金属-AlN）多層膜の Cs 補正 STEM 観察","顕微鏡学会",,,,,,2012,
"Cai, W.,Shinji Muraishi,Ji Shi,YOSHIO NAKAMURA,Liu, W.,Yu, R.","Spin reorientation transition in (111) textured L1<sub>0</sub>CoPt layers",,"Applied Physics A: Materials Science and Processing",,"Vol. 109","No. 1","pp. 69-73",2012,
"Cai,Shinji Muraishi,Ji Shi,YOSHIO NAKAMURA","Curie temperatures of CoPt ultrathin continuous films",,"Applied Physics A",,"Vol. 107",,"pp. 519-523",2012,
"Takashi Harumoto,Shinji Muraishi,Ji Shi,Nakamura Yoshio","Preferred Orientation Control of AlN Films Using Pt Underlayer","7th International Forum on Advance Materials","Abstract of the 7th International Forum on Advanced material Science and Technology","Dalian Institue of Technology, Chinese Materials Reserch Society in Japan",,,,2011,Sept.
"Shinji Muraishi,MASAAKI TAKAYA","Plastic Domain Microstructure and Hardness Analysis of Indented Layered Composite","Thermec 2011",,,,,,2011,Aug.
"Shinji Muraishi,Masaaki Takaya","Size dependent hardening and plastic zone microstructure in film and substrate composite","International indentation workshop 4",,,,,"p. 78",2011,July
"Takashi Harumoto,Shinji Muraishi,Ji Shi,Yoshio Nakamura","Highly Textured (111) Pt Substrates for Preferred Orientation Controlled AlN Films",,"Materials Science Forum",,"Vol. 675-677",,"pp. 1259-1262",2011,Feb.
"T. Harumoto,S. Muraishi,J. Shi,Y. Nakamura","Emergence of (001) preferred orientation in AlN film using ultrathin intermediate Pt layer",,"MATERIALS TECHNOLOGY",,"Vol. 26",,"pp. 32-34",2011,Feb.
"Jian Wang,Shinji Muraishi,Ji Shi,YOSHIO NAKAMURA","Antiferromagnetic layer thickness dependence of exchange bias in sputter-deposited Co/CoO/Co trilayer",,"Materials Science Forum",,"Vol. 675-677",,"pp. 1263-1266",2011,
"高谷正明,村石信二,史蹟,中村吉男","インデンテーションにより薄膜内に導入された塑性域の変位とひずみ分布の測定","日本金属学会2010秋期（第１４７回） 大会",,,,,,2010,Sept.
"二木 有一,春本 高志,村石 信二,史 蹟,中村 吉男","AlNに閉じ込められた高配向Pt極薄膜の面間隔と熱膨張係数","日本金属学会２０１０年秋期大会","日本金属学会講演概要 ２０１０年秋期大会","日本金属学会",,,,2010,Sept.
"Shinji Muraishi,Hiromitsu Chinenn,Masaaki Takaya,Kousuke Hara","Triangular Dislocation Loop Model for Surface Displacement in Indented Thin Films","the 7th Pacific Rim International Conference on Advanced Materials and Processing","Materials Science Forum",,"Vol. 654-656",,"pp. 1768-1771",2010,Aug.
"Takashi Harumoto,Shinji Muraishi,Ji Shi,Yoshio Nakamura","Effect of Ultra-Thin Pt Layer on the Preferred Orientation of AlN Films","The 7th Pacific Rim International Conference on Advanced Materials and Processing","Materials Science Forum","Materials Australia","Vol. 654-656",,"pp. 1776",2010,June
"Jian Wang,Shinji Muraishi,Ji Shi,Nakamura Yoshio","Antiferromagnetic layer thickness dependence of exchange bias in sputter-deposited Co/CoO/Co trilayer","7th International Forum on Advance Materials","Abstract of the 7th International Forum on Advanced material Science and Technology","Dalian Institue of Technology, Chinese Materials Reserch Society in Japan",,,,2010,June
"Takashi Harumoto,Shinji Muraishi,Ji Shi,Yoshio Nakamura","Emergence of (001) prefered orientation in AlN film using ultrathin Pt/AlN buffer layer","International Symposium on Reactive Sputter Deposition 2009","Abstract book of RSD2009",,,,"  poster 8",2009,Dec.
"Shinji Muraishi","Mixture rule for indentation derived Young's modulus in layered composites",,"Thin Solid Films","ELSEVIER","Vol. 518",,"pp. 233-246",2009,Sept.
"村石信二,史蹟,中村吉男","Berkovich圧子を模した３角形転位ループモデルによる表面変位の評価","日本金属学会 2009年秋期（第145回）大会","日本金属学会 2009年秋期（第145回）大会 概要","社団法人 日本金属学会",,,,2009,Sept.
"高谷正明,近藤直弥,村石信二,史蹟,中村吉男","インデンテーションによる多層薄膜の圧痕周囲のTEM断面組織観察","日本金属学会 2009年秋期（第145回）大会","日本金属学会 2009年秋期（第145回）大会 概要","社団法人 日本金属学会",,,,2009,Sept.
"村石信二,史蹟,中村吉男","インデンテーション法による多層膜の弾性率評価法について：Mindlin解を用いた弾性複合則","2008年秋期（第143回）日本金属学会","日本金属学会講演概要（第143回）",,,,,2008,Sept.
"原幸介,村石信二,中村吉男","集中荷重条件下における多層薄膜材料のヤング率に対する複合則の適用","2008年秋期（第143回）日本金属学会","日本金属学会講演概要（第143回）",,,,,2008,Sept.
"Shinji Muraishi,Hirono Naito,Ji Shi,YOSHIO NAKAMURA,Tatsuhiko Aizawa","Controlled Elasticity in Nano-structured Metallic Glass by Ion Implantation","PRICM6","Material Science Forum","Trans Tech Publications","Vol. 561-565",,"pp. 1315-1318",2007,Nov.
"近藤直弥,村石信二,史蹟,中村吉男","ナノインデンテーションによるAl-4wt%Cu/Al2Cu 基板上薄膜のヤング率評価",,"日本金属学会講演概要(第141回・岐阜)",,,,"p. 476",2007,Sept.
"村石信二,内藤 寛乃,史蹟,中村吉男","イオン注入したa-(Zr,Cu)/Si 基板上薄膜のヤング率評価",,"日本金属学会講演概要 (第141回・岐阜)",,,,"p. 286",2007,Sept.
"S. Muraishi,Hirono Naito,Jhi Shi,Yoshio Nakamura,Tatsuhiko Aizawa","Microstructure and Elasticity of Glassy Surface by Ion Implantation",,"Mater. Trans",,"Vol. 48","No. 7","pp. 1859-1863",2007,July
"D. J. Santjojo,Tatsuhiko Aizawa,S. Muraishi","Ellipsometric Characterization on Multi-Layered Thin Film Systems during Hydrogenation",,"Mater. Trans.",,"Vol. 48","No. 6","pp. 1380-1386",2007,June
"村石信二,内藤寛乃,史蹟,中村吉男,相澤龍彦","イオン注入したZr基金属ガラスの内部組織とその力学特性","日本金属学会第140回春期大会","日本金属学会講演概要（第140回 千葉工大）",,,,"pp. 416",2007,Mar.
"S. Muraishi,H. Naito,T. Aizawa","Surface Amorphization in Zr Alloy Films via Ni Implantation","2006 TMS Annual Meeting & Exhibition","Surfaces and Interfaces in Nano-structured materiasl II,TMS (The minerals, metals and materials society)",,,,"pp. 23-30",2006,Mar.
"S. Muraishi,H. Naito,J. Shi,Y. Nakamura","N-Implantation Induced Phase Separation in Zr-Cu Film","2006 TMS Annual Meeting & Exhibition","Surfaces and Interfaces in Nano-structured materiasl II,TMS (The minerals, metals and materials society)",,,,"pp. 3-8",2006,Mar.
"S. Muraishi,H Naito,T. Aizawa","Compositional Dependent Amorphization in Zr Alloy Films by Means of Ni-Implantation",,"Mater. Trans.",,"Vol. 46","No. 12","pp. 2751-2754",2005,Dec.
"内藤寛乃,村石信二,史蹟,中村吉男","Zr-Cu 合金薄膜のNイオン注入に伴う組織変化","日本金属学会第137回秋期大会","日本金属学会講演概要（第137回 広島）",,,,"pp. 261",2005,Sept.
"村石信二,相澤龍彦","Niイオン照射したZr合金のガラス化過程に及ぼす照射エネルギーの影響,","日本金属学会第137回秋期大会","日本金属学会講演概要（第137回　広島）",,,,"pp. 261",2005,Sept.
"S. Muraishi,H. Naito,T. Aizawa","Fabrication of glassy surface via ion-irradiation: Ni-irradiation induced c-a transition behavior in Zr alloys",,"Materials Science of Bulk Metallic Glasses",,,"No. 6","pp. 4",2005,July
"村石信二 相澤龍彦","イオン照射によるＺｒ基合金の非晶質化",,"「金属ガラスの最適構造化プロセス」研究会講演概要",,"Vol. 2",,"pp. 36",2005,June
"T. Aizawa,A. Mitsuo,S. Yamamoto,T. Sumitomo,S. Muraishi","Self-lubrication mechanism via the in situ formed lubricious oxide tribofilm",,"Wear",,"Vol. 259",,"pp. 708-718",2005,
"S. Muraishi,T. Aizawa,H. Kuwahara","Phase Separation into Nano-crystalline Nitrides in Ternary Ti-Si-N System via N Implantation",,"Materials Science Forum",,"Vol. 475-479",,"pp. 3651-3654",2004,Nov.
"S. Muraishi,S. Kumai,A. Sato","Competitive Nucleation and Growth of {111} Ω with {001} GP zones and θ’ in a Stress-Aged Al-Cu-Mg-Ag Alloy",,"Materials Transaction",,"Vol. 45","No. 10","pp. 2974-2980",2004,Oct.
"T. Aizawa,A. Mitsuo,S. Yamamoto,S. Muraishi,T. Sumitomo","Dry Machining Tool Design via Chlorine Ion Implantation",,"The Proceedings of The 14th International Federation of Heat Treatment and Surface Engineering",,"Vol. -",,"pp. -",2004,Oct.
"S. Muraihsi,T. Aizawa","Structural evolution of Zr based alloy films via Ni-implantation",,"Collected Abstracts of the 2004 Autumn Meeting of The Japan Institute of Metal",,,,"pp. 87",2004,Sept.
"S. Muraishi,T. Aizawa","Surface nano structuring of Zr Thin Film via Ni-implantation","11th International Symposium on Metastable, Mechanically Alloyed and Nanocrystalline Materials","Journal of Metastable and Nanocrystalline Materials",,"Vol. 24",,"pp. 65-68",2004,Aug.
"R. B. Song,T. Aizawa,K. Kondo,S. Muraishi,A. Yamamoto,T. Obara","Thermoelectric properties of Mg2Si1?XGeX materials prepared by bulk mechanical alloying and hot pressing",,"Collected Abstracts of the 2004 Spring Meeting of The Japan Institute of Metal",,,,"pp. -",2004,Mar.
"S. Muraishi,T. Aizawa,H. Kuwahara","Reaction induced phase separation from supersaturated solid solution to nitride in thin films",,"Surface and Coating Technology",,"Vol. 188-189",,"pp. 431-434",2004,
"Shinji Muraishi","Fabrication of nano-structured titanium thin films via N ion implantation and post-annealing treatment",,"Surface and Coating Technology",,"Vol. 188-189",,"pp. 260-264",2004,
"T.Aizawa,Y. Suwa,S. Muraishi","Real Microstructure Modeling for Stiffness and Strength Analyses of Texture in Ores",,"ISIJ International",,"Vol. 44","No. 12","pp. 2086-2092",2004,
"Shinji Muraishi","Microstructure of N-implanted Ti thin films prepared by ion beam sputtering deposition",,"Ceramic Transaction",,"Vol. 148",,"pp. 155-162",2004,
"村石信二　相澤龍彦","イオンビーム技術を用いた表面ガラス構造化",,"「金属ガラスの最適構造化プロセス」研究会講演概要",,"Vol. 1",,"pp. 36",2003,Dec.
"R. B. Song,T. Aizawa,K. Kondo,S. Muraishi,A. Yamamoto","Thermoelectric properties of Mg2Si1?XGeX materials prepared by bulk mechanical alloying and hot pressing",,"Corrected Abstracts of the 2003 Autumn Meeting of the Japan Institute of Metals",,,,"pp. 164",2003,Oct.
"村石信二,相澤龍彦,桑原秀行","N＋ イオン注入による Ti-X 合金薄膜の反応相分離挙動",,"日本金属学会講演概要（第133回・札幌）",,,,"pp. 495",2003,Oct.
"Y. J. Wang,S. Muraishi,T. Aizawa,C. Nishimur","Solid-State Synthesis of Mg2Co alloy by bulk mechanical alloying",,"Corrected Abstracts of the 2003 Autumn Meeting of The Japan Institute of Metals",,,,"pp. 165",2003,Oct.
"桑原秀行,伊勢直子,黒川正人,村石信二,Helen.Tan,相澤龍彦","人工骨材料としてのマグネシウムの可能性と安全性",,"日本金属学会講演概要（133回・札幌）",,,,"pp. 163",2003,Oct.
"村石信二","顔面骨折整復に用いたチタン製プレートの表面変化と周囲組織の元素分析",,"BiomedicalResearch on Trace Elements",,"Vol. 14",,"pp. 219-225",2003,
"村石信二,相澤龍彦,桑原秀行","N＋ イオン注入による非平衡 Ti-N 薄膜の組織制御",,"日本金属学会講演概要(第133回・札幌）",,,,"pp. 625",2003,
"Shinji Muraishi","Strengthening of Al-Cu Single crystals by stress-oriented GP zones",,"Philosophical Magazine A",,"Vol. 82","No. 14","pp. 2755-2771",2002,
"村石信二,相澤龍彦","ユニットセルモデルによるポーラス体の強度・剛性解析",,"日本学術会議材料研究連合講演概要集(第46回・京都)",,"Vol. 46",,"pp. -",2002,
"Shinji Muraishi","Stress-Oriented Nucleation of Ω Phase Plates in an Al-Cu-Mg-Ag alloy",,"Philosophical Magazine A",,"Vol. 82","No. 2","pp. 415-428",2002,
"S. Muraishi,S. Kumai,A. Sato","Yield Shear Stress Anisotropy of Al-Cu Single Crystal Containing Single Variant GP zones",,"Material Science Forum",,"Vol. 396-402",,"pp. 1001-1006",2002,
"村石信二","Precipitation Structure Under External Stress and Hardening By Oriented Precipitates In Al-Cu Base Alloys」
（Al-Cu系合金の外力下での析出組織と配列制御した析出相による強化）",,,,,,,2002,
"S. Muraishi,S. Kumai,A. Sato","Stress-Assisted Nucleation of Ω Precipitates in Al-Cu-Mg-Ag Alloys",,"The Proceedings of the 2nd International Conference on Light Materials for Transportation Systems",,,,"pp. 541-546",2001,