"林　　巖,岩附信行,森川広一,香川美仁,山本和男,虎頭保尚","コオロギとスズムシの発音機構の工学的検討",,"日本IFToMM会議シンポジウム前刷集",,,,"pp. 88",2000,
"半坂征則,林　　巖,岩附信行,御船直人","拘束型磁性制振材を貼付した平板の曲げ振動解析と損失係数の導出",,"DYNAMICS AND DESIGN CONFERENCE 2000 アブストラクト集，CD-ROM論文集",,,"No. 00-6","pp. 143(CD-ROM:6)",2000,
"Tatsuhiro Yamaguchi,Yoshihito Kagawa,Koichi Morikawa,Nobuyuki Iwatsuki,Iwao Hayashi","Reduction of Sound Power Radiated from a Hemisphere by Modifying Ribs",,"Proc. of the first International Workshop Department of Mechanical Sciences and Engineering",,,,"pp. 5-7",2000,
"岩附信行,林　　巖,森川広一,香川美仁,細野美玲,北村友勝","モジュール代表点を用いた網構造ロボットの運動制御",,"日本IFToMM会議シンポジウム前刷集",,,,"pp. 18-24",2000,
"Masato Kinouchi,Iwao Hayashi,Nobuyuki Iwatsuki,Koichi Morikawa,Jyunji Shibata,Kohji Suzuki","Application of Fuzzy PI Control to improve the positioning accuracy of a rotary-linear motor driven by two-dimensional ultrasonic actuators",,"MICROPROCESSORS AND MICROSYSYTEMS",,"Vol. 24",,"pp. 105-112",2000,
"油谷英明,林　　巖,岩附信行,森川広一,香川美仁,岡本泰弘,吉田龍一,中野治行","スムーズインパクト方式回転・直動モータの開発",,"第12回「電磁力関連のダイナミックス」シンポジウム講演論文集",,,,"pp. 505-508",2000,
"岩附信行,林　　巖,三浦隆未,森川広一,香川美仁,岡本泰弘,吉田龍一,中野治行","スムーズインパクト方式圧電マイクロリニアアクチュエータのフィードバック制御",,"第12回「電磁力関連のダイナミックス」シンポジウム講演論文集",,,,"pp. 501-504",2000,
"山本和男,林　　巖,岩附信行,森川広一,香川美仁","こおろぎの発音メカニズムの研究",,"DYNAMICS & DESIGN CONFERENCE 20000 アブストラクト集",,,"No. 00-6","pp. 147",2000,
"山口竜央,香川美仁,林　　巖,岩附信行,森川広一","軸対称構造物の最適化による音響放射パワー最小化の研究",,"DYNAMICS & DESIGN CONFERENCE 20000 アブストラクト集，CD-ROM論文集",,,"No. 00-6","pp. 149(CD-ROM:5)",2000,
"稲垣洋輔,香川美仁,森川広一,岩附信行,林　　巖","騒音低減を目的としたハードディスクドライブケースの形状最適化",,"DYNAMICS & DESIGN CONFERENCE 20000 アブストラクト集，CD-ROM論文集",,,"No. 00-6","pp. 150（CD-ROM:5）",2000,
"加藤慎一,香川美仁,森川広一,岩附信行,林　　巖","制振材を貼付した平板からの音響放射パワーの推定",,"DYNAMICS & DESIGN CONFERENCE 20000 アブストラクト集，CD-ROM論文集",,,"No. 00-6","pp. 142（CD-ROM:5）",2000,
"塚本　健,森川広一,林　　巖,岩附信行","音響放射パワーを低減するくぼみ付加の研究",,"DYNAMICS AND DESIGN CONFERENCE 2000 アブストラクト集，CD-ROM論文集",,,"No. 00-6","pp. 148（CD-ROM:5）",2000,
"IWAO HAYASHI","The Ideal Tooth Profile of a Conical External or Internal Gear which engages with an Involute Gear Over the Entire Tooth Width",,"JSME International Journal, Series C",,,"No. 41","pp. 901-911",1998,
"IWAO HAYASHI","Study of the Grairty Peudulum Method for Precise Measurement of the Friction Coefficient between Mating Gear Tooth Surfaces",,"Transactions of the Japan Society of Mechanical Engineers",,"Vol. 64","No. 625","pp. 3603-3610",1998,
"IWAO HAYASHI","Estimation and Measurement of the Sound Power Radiating from a Circular Plate with a Solid Shaft and a Solid Cylinder",,"JSME International Journal, Series C",,"Vol. 41","No. 1","pp. 13-29",1998,
"IWAO HAYASHI","Estimation and Measurement of Sound Power Radiated from a Circular Plate with a Solid Shaft and a Solid Cylinder(1st Report, Basic Theory for Estimating Sound Radiation Power)",,"Transactions of the Japan Society of Mechamical Engineers",,"Vol. 63","No. 605","pp. 69-76",1997,
"坑　　恒,林　　巖,岩附信行","円筒付き軸一体円板から放射される音響パワーの推定と実験（第１報、推定基礎理論）",,"日本機械学会論文集（Ｃ編）",,"Vol. 63","No. 605","pp. 69-76",1997,
"坑　　恒,林　　巖,岩附信行","円筒付き軸一体円板から放射される音響パワーの推定と実験（第２報、音響放射パワーの推定と実験）",,"日本機械学会論文集（Ｃ編）",,"Vol. 63","No. 605","pp. 77-83",1997,
"IWAO HAYASHI","Rotary Linear Motor Driven by Two-Dimensional Ultrasonic Actuators",,"The Transactions of the Institute of Electronics, Information and Communication Engineers A",,"Vol. J80A","No. 10","pp. 1736-1743",1997,
"IWAO HAYASHI","Application of FEM Modal Analysis to the Estimation of Sound Radiation Power.",,"Transactions of the Japan Society of Mechanical Engineers",,"Vol. 63","No. 615","pp. 3824-3831",1997,
"IWAO HAYASHI","The Ideal Tooth Profiles of Conical-External and -Internal Gears Meshing with Cylindrical-Inuolate Gears over the Entire Tooth Width",,"Transactions of the Japan Society of Mechanical Engineers.",,"Vol. 63","No. 613","pp. 3235-3242",1997,
"IWAO HAYASHI","Estimation and Measurement of the Sound Power Radiated from a Cirular Plate with a Solid Shaft and a Solid Cylinder(2nd Report, Estimation and Measurement of Sound Radiation Power)",,"Transactions of the Japan Society of Mechanical Engineers",,"Vol. 63","No. 605","pp. 77-83",1997,
"山本　亮,遠藤伸貴,小代泰弘,岩附信行,林　　巖,柴田順二,鈴木浩二","超音波２次元アクチュエータを用いた回転・直動モータの研究",,"電子情報通信学会論文誌Ａ",,"Vol. J80-A","No. 10","pp. 1736-1743",1997,
"IWAO HAYASHI","Improvement of Efficiency of 3K-type Mechanical Paradox Planetary Gear Drive by Equalizing Approach-and Recess-Contact Ratios",,"Transactions of the Japan Society of Mechanical Engineers",,"Vol. 62","No. 596","pp. 1548-1555",1996,
"林巖","よくわかる工業力学(監修)",,"培風館","培風館",,,,1996,
"IWAO HAYASHI","Estimation amd Measurement of the Sound Power Radiating from a Circular Plate with a Solid Shaft Subjected to a Three Dimensional Load",,"JSME International Journal",,"Vol. 38","No. 3","pp. 398-410",1995,
"IWAO HAYASHI","Estimation Method of Sound Radiation Power Caused by Vibration",,"静粛工学,快適空間をめざして,開発社","静粛工学,快適空間をめざして,開発社",,,"pp. 89-102",1995,
"IWAO HAYASHI","The Development of an In-Pipe Microrobot Applying the Motion of an Earthworm",,"Journal of the Japan Society for Precision Engineering",,"Vol. 61","No. 1","pp. 90-94",1995,
"IWAO HAYASHI","An Electromagnetic Cycloid Motor",,"精密工学会誌",,"Vol. 61","No. 1","pp. 95-99",1995,
"IWAO HAYASHI","The Real-time Measurement of In-Plane Vibration by Using a Laser Speckle Interferometer with the Double-aperture Method",,"精密工学会誌",,"Vol. 61","No. 5","pp. 662-666",1995,
"IWAO HAYASHI","Theoretical Modal Analysis of a Circular Plate with a Solid Shaft and Solid Cylinder",,"日本機械学会論文集",,"Vol. 61","No. 583","pp. 894-901",1995,
"IWAO HAYASHI","Optimization of Profile-Shift Coefficients of Conventional Mechanical Paradox Planetary Gear Drives to Obtain Maximum Efficiency",,"Transactions of the Japan Society of Mechanical Engineers",,"Vol. 61","No. 586","pp. 2559-2566",1995,
"IWAO HAYASHI","Modal Analysis of a Vibrating Plate Considering Internal Damping and Application to the Estimation of Radiated Sound Power (2nd Report)",,"Transactions of the Japan Society of Mechanical Engineers",,"Vol. 60","No. 569","pp. 78-85",1994,
"IWAO HAYASHI","The Theoretical Modal Analysis of a Circular Plate with a Solid Shaft",,"Journal of Sound and Vibration",,"Vol. 173","No. 5","pp. 633-655",1994,
"IWAO HAYASHI","The Estimation and Measurement of the Sound Power Radiated from a Circular Plate with a Solid Shaft Subjected to an Axial Load",,"Journal of Sound and Vibration",,"Vol. 173","No. 5","pp. 657-682",1994,
"IWAO HAYASHI","Optimum Motion Control of a Redundant Robot with the Objective Function of Dexterity",,"日本機械学会論文集",,"Vol. 60","No. 574","pp. 2064-2070",1994,
"IWAO HAYASHI","Vibration Analysis of Elastic Manipulators with the Adjacent Links Joint Method",,"日本機械学会論文集",,"Vol. 60","No. 575","pp. 2331-2337",1994,
"IWAO HAYASHI","Maximum Efficiencies of Conventional Mechanical Paradox Planetary Geavs for Reduction Drive",,"日本機械学会論文集",,"Vol. 60","No. 579","pp. 3940-3947",1994,
"IWAO HAYASHI","Optimum Motion Control of a Redundant Robot with the Objective Function of Dexterity",,"JSME International Journal",,"Vol. 37","No. 3","pp. 581-587",1994,
"IWAO HAYASHI","The Theoretical Modal Analysis of a Thick Cylinder",,"日本機械学会論文集",,"Vol. 60","No. 575","pp. 2233-2240",1994,
"IWAO HAYASHI","Modal Analysis of a Vibrating Plate Considering Internal Damping and Application to the Estimation of Radiated Sound Power(1st Report)",,"Transactions of the Japan Society of Mechanical Engineers",,"Vol. 60","No. 569","pp. 72-77",1994,
"IWAO HAYASHI","Modal Analysis of Thick Cylinder with Both Ends Free Based on Mindlin's Method",,"日本機械学会論文集",,"Vol. 60","No. 571","pp. 774-780",1994,
"IWAO HAYASHI","Estimation of Noise Power Radiated from Gear Blanks(6th Report)",,"Transactions of the Japan Society of Mechanical Engineers",,"Vol. 59","No. 562","pp. 1870-1877",1993,
"IWAO HAYASHI","A Spherical Motor of Three-Degrce-of-Freedom Driven by Ultrasonic linear Actuators",,"Transactions of the Japan Society of Precision Engineering",,"Vol. 59","No. 3","pp. 405-410",1993,
"IWAO HAYASHI","Measurement of In-plane Vibrations with a Double-aperture daser Speckle Interferometry",,"Transactions of the Japan Society of Precision Engineering",,"Vol. 59","No. 4","pp. 613-618",1993,
"IWAO HAYASHI","Estimation of Sound Power Radiated From Gear Blanks(5th Report)",,"Transactions of the Japan Society of Engineers Mechanical",,"Vol. 58","No. 554","pp. 3088-3095",1992,
"IWAO HAYASHI","The Output Characteristics of a Piezo-electric Aycloid Motor in a High Frequenoy Range",,"Transactions of the Japan Society Precision Engineering",,"Vol. 58","No. 11","pp. 1921-1926",1992,
"IWAO HAYASHI","Measuring Acouracy of Laser Speckle Inter-ferometer Using Double-aperture Method",,"精密工学会誌",,"Vol. 58",,"pp. 8",1992,
"IWAO HAYASHI","Estimation of Noise Power Radiated from Gear Bodies, 4th Report",,"日本機械学会論文集",,"Vol. 58",,"pp. 552",1992,
"IWAO HAYASHI","Development of a Piezoelectic Cycloid Motor",,"精密工学会誌",,"Vol. 57",,"pp. 8",1991,
"IWAO HAYASHI","Oversampling FFT and Its Application for Analyzing Signals",,"日本機械学会論文集",,"Vol. 57",,"pp. 541",1991,
"IWAO HAYASHI","Estimation of Noise Power Radiated from Gear Bodies, 3rd Report",,"日本機械学会論文集",,"Vol. 57",,"pp. 535",1991,
"IWAO HAYASHI","Oversampling Method Comkine with Zoom-FFT and Its Application for Analyzing Gear Transmission Error",,"精密工学会誌",,"Vol. 57",,"pp. 5",1991,
"IWAO HAYASHI","Estimation of Noese Power Radiated from Gear Boides, 2nd Report",,"日本機械学会論文集",,"Vol. 56",,"pp. 531",1990,
"林　　巖,牧　泰希,岩附信行","The Natural Mode of Vibration of a Circular Plate with a Solid Shaft (2nd Report)",,"Transactions of the Japan Society of Mecahnical Engineers, Series C",,"Vol. 56","No. 524","pp. 952-957",1990,
"IWAO HAYASHI","Estimation of Noise Power Radiated from Gear Bodies, 1st Report",,"日本機械学会論文集",,"Vol. 56",,"pp. 531",1990,
"林　　巖,牧　泰希,岩附信行","軸一体円板の固有振動モードについて（第1報、円板と軸の境界部の弾性変形と軸の曲げ変形を考慮した固有振動数の補正）",,"日本機械学会論文集（Ｃ編）",,"Vol. 55","No. 516","pp. 1885-1889",1989,
"林巖","歯車かみあい精度の動的測定に関する研究",,,,,,,1977,
"林巌,林輝,永嶋慎一,木村康治","平均応答法による歯車のかみあい伝達誤差の測定",,"精密機械",,"Vol. 42","No. 5","pp. 370-375",1976,May
"I.HAYASHI,T.HAYASHI,S.NAGASHIMA,K.KIMURA","On Measurement of Transmission Error of Gears by Averaging Method",,"Bulletin of Research Laboratory of Precision Machinery and Electronics (Tokyo Institute of Technology",,"Vol. 37",,"pp. 87-96",1976,
"林巖","歯形測定器の測定精度に関する研究",,,,,,,1969,