"Rei Kobayashi,MASAHIKO YOSHINO,Yuki Nakagawa","Optimization of bullseye structure on a metal surface to obtain localized enhancement of incident light","ICPE 2022","Proceedings of ICPE2022",,,,,2023,Nov.
"佐藤寛恭,中前圭人,中川佑貴,南條博,赤上陽一,中村竜太,久住孝幸,吉野雅彦","病理診断試料の薄切用ミクロトーム刃の耐久性試験","2022年度精密工学会秋季大会学術講演会","精密工学会学術講演会講演論文集",,,,"p. 278-279",2023,Aug.
"吉野雅彦,李原","静的再結晶粒の微細化に及ぼす変形様式の影響","2023年度塑性加工春季講演会","塑性加工講演会講演論文集",,,,,2023,June
"吉野雅彦","鋼材の結晶組織微細化に及ぼす加工様式の影響","MF-Tokyo2023",,,,,,2023,
"吉野雅彦","微細加工による材料機能創出","MF-Tokyo2023",,,,,,2023,
"吉野雅彦,永島史悠,中川佑貴","塑性変形様式が多結晶粒内の微細変形組織に及ぼす影響","第72回塑性加工連合講演会","第72回塑性加工連合講演会講演論文集",,,,"p. 23-24",2022,Oct.
"廣政航介,吉野雅彦,山中晃徳,中川佑貴","ベイズ最適化を用いた純鉄の結晶塑性パラメータの決定","第72回塑性加工連合講演会","第72回塑性加工連合講演会講演論文集",,,,"p. 149-150",2022,Oct.
"李原,吉野雅彦,中川佑貴,山中晃徳","純鉄材の結晶粒微細化に及ぼす剪断塑性ひずみの効果","2022年度塑性加工春季講演会","2022年度塑性加工春季講演会講演論文集",,,,"p. 203-204",2022,May
"安部歩夢,吉野雅彦,廣政航介,山中晃徳,中川佑貴","単結晶純鉄の結晶塑性パラメータ推定法の検討","2022年度塑性加工春季講演会","2022年度塑性加工春季講演会講演論文集",,,,"p. 207-208",2022,May
"佐藤寛恭,吉野雅彦,北村峻祐,中川佑貴,南條博,赤上陽一,中村竜太,久住孝幸","病理診断試料の薄切における切削力および薄切片厚さの検討","2022年度精密工学会春季大会学術講演会","2022年度精密工学会春季大会講演論文集",,,,"p. 503-504",2022,Mar.
"Fumihisa Nagashima,Yuki Nakagawa,MASAHIKO YOSHINO","Numerical Analysis of Subgrain Formation during Metal Cutting and Rolling Based on the Crystal Plasticity Theory",,"Special issue of “Developments in modelling and simulation of material forming, a focus on Japan, South Korea and China”, the International Journal of Materials Forming",,,,,2022,Feb.
"Yuki Nakagawa,MASAHIKO YOSHINO,Ayumu Abe","Combined Process of 3D Printing and Joining with Metal by Fused Deposition Modelling of Plastic Parts","The 10th International Conferene on Leading Edge Manufacturing Technologies in 21st Century (LEM21)",,,,,"pp. 475-478",2022,
"Yusuke Kubota,MASAHIKO YOSHINO,Yuki Nakagawa,長尾忠昭","Development of new type of SERS substrate fabricated by NPF method","18th International Conference on Precision Engineering (ICPE2020)",,,,,,2022,
"Fumihisa Nagashima,MASAHIKO YOSHINO,Yuki Nakagawa","Application of metal cutting process to improvement of high performance stainless steel","18th International Conference on Precision Engineering (ICPE2020)",,,,,,2022,
"MASAHIKO YOSHINO,Yusuke Kubota,Yuki Nakagawa,Takatoki Yamamoto,長尾忠昭","SERS effect of rhombic Au film structure fabricated by NPF method","The 10th International Conferene on Leading Edge Manufacturing Technologies in 21st Century (LEM21)",,,,,"pp. 171-174",2022,
"北村峻祐,吉野雅彦,丸山祐,中西将也,中川佑貴,南條博,赤上陽一,中村竜太,久住孝幸","病理診断のための薄切片厚さの高精度化法の検討","2021年度精密工学会秋季大会学術講演会 WEB講演会","講演論文集",,,,"p. 283-284",2021,Sept.
"吉野雅彦,永島史悠,中川佑貴,寺野元規","バニシ加工による鉄板表面の結晶粒微細化","日本機械学会2021年度年次大会",,,,,,2021,Sept.
"廣政航介,山中晃徳,中川佑貴,吉野雅彦","単結晶純鉄の変形挙動に対する結晶方位の影響","2021年度塑性加工春季講演会 WEB講演会","2021年度塑性加工春季講演会 講演論文集",,,,,2021,June
"寺野元規,吉野雅彦,上野貴之","金薄膜自己組織化過程のIn-situ SEM観察",,"実験力学",,"Vol. 21","No. 1","pp. 30-34",2021,Mar.
"永島史悠,吉野雅彦,中川佑貴","強せん断加工による鉄系材料の結晶粒微細化","第71回塑性加工連合講演会","第71回塑性加工連合講演会 講演論文集",,,,"p. 161-162",2020,Nov.
"F Nagashima,Y Nakagawa,M Yoshino","Influence of Severe Plastic Deformation on Static Recrystallization Microstructure of Pure Iron",,"Metals",,"Vol. 10","No. 10","pp. 1320",2020,Oct.
"Fumihisa Nagashima,Yuki Nakagawa,Masahiko Yoshino","Study on effects of strong shear strain on recrystallized grain size of pure iron and microstructure control method","18th International Conference on Metal Forming 2020","Procedia Manufacturing",,"Vol. 50",,"pp. 248-252",2020,Sept.
"吉野雅彦,青柳友之,中川佑貴","微細エンボス加工による微細金属素子の作製法",,"日本機械学会2020年度年次大会 講演論文集",,,,,2020,Sept.
"Fumihisa Nagashima,Yuki Nakagawa,Masahiko Yoshino","Study on effects of strong shear strain on recrystallized grain size of pure iron and microstructure control method","18th International Conference on Metal Forming 2020","Procedia Manufacturing",,"Vol. 50",,"pp. 248-252",2020,Sept.
"H Shen,Y Nakagawa,M Yoshino","Subtractive transfer printing process for rapid fabrication of Au nano/micro structures on a polymer substrate",,"Journal of Micromechanics and Microengineering",,"Vol. 30","No. 11","pp. 115006",2020,July
"Potejana Potejanasak,Truong Duc Phuc,Motoki Terano,Takatoki Yamamoto,Masahiko Yoshino","Chemical Lift-Off Process Using Acetone Ink for Easy Fabrication of Metallic Nano/Microstructures",,"International Journal of Automation Technology",,,,,2020,Mar.
"Abdallah  Abdelkawy,,MASAHIKO YOSHINO,Yuki Nakagawa","EFFECT OF TOOL RAKE ANGLE AND CRYSTAL ORIENTATION ON DUCTILE MODE CUTTING OF HARD/BRITTLE MATERIALS",,"International Journal of Automation Technology, Special Iissue for Novel Fabrication Processes for Tailored Functional Materials and Surface",,"vol. 14","No. 2","pp. 253-259",2020,Mar.
"Abdallah  Abdelkawy,,MASAHIKO YOSHINO,Yuki Nakagawa","EFFECT OF TOOL RAKE ANGLE AND CRYSTAL ORIENTATION ON DUCTILE MODE CUTTING OF HARD/BRITTLE MATERIALS",,"International Journal of Automation Technology, Special Iissue for Novel Fabrication Processes for Tailored Functional Materials and Surface",,"vol. 14","No. 2","pp. 253-259",2020,Mar.
"Potejanasak Potejana,MASAHIKO YOSHINO,Truong Phuc,Motoki Terano","CHEMICAL STAMPING-COATING-PEELING PROCESS FOR EFFICIENT FABRICATION OF METALLIC NANO/MICROSTRUCTURES",,"International Journal of Automation Technology, Special Iissue for Novel Fabrication Processes for Tailored Functional Materials and Surfaces",,"vol. 14","No. 2","pp. 229-237",2020,Mar.
"Hao Shen,MASAHIKO YOSHINO","Efficient fabrication process for metallic structures of submicrometer size",,"Journal of Micromechanics and Microengineering",,"Vol. 30","No. 3",,2020,Feb.
"MASAHIKO YOSHINO,Ryandanu Priwanta Wuryanjono,Yuki Nakagawa,Motoki Terano","Microstructure control of iron sheet surface by combination of burnishing and annealing","8th International Conference on Mechanics and Materials in Design, M2D2019",,,,,,2020,
"吉野雅彦","高静水圧下における硬脆材料の延性モード切削加工",,"日本フルイドパワーシステム学会",,"Vol. 50","No. 6","p. 5-7",2019,Dec.
"Chang Ye,Yuki Nakagawa,Takatoki Yamamoto,MASAHIKO YOSHINO","Development of a Double Layer Metal Nano-structure for the SERS Substrate with NPF and Chemical Etching Process","The 8th International Conference of Asian Society for Precision Engineering and Nanotechnology (ASPEN 2019)",,,,,,2019,Nov.
"Fumihisa Nagashima,Yuki Nakagawa,Motoki Terano,Atsushi  Ito,Siro  Torizuka,MASAHIKO YOSHINO","Microstructure Control of Pure Iron by Metal Cutting Technique","The 8th International Conference of Asian Society for Precision Engineering and Nanotechnology (ASPEN 2019）","Procedia Manufacturing",,,"  15","  1541?1548",2019,Nov.
"Motoki Terano,MASAHIKO YOSHINO,Yousuke Iwasa,Shintaro Chimura,Naoki  Okada,Hikari  Ikeda","Investigation of Fabrication Method for Micro/Nano Structure of Au Using Oily Ink Stamping","The 8th International Conference of Asian Society for Precision Engineering and Nanotechnology (ASPEN 2019）",,,,,,2019,Nov.
"中西将也,吉野雅彦,中川佑貴,南條博,赤上陽一,中村竜太","病理診断用プレパラート作成のための薄切片の切削機構の検討","第13回生産加工・工作機械部門講演会,",,,,,,2019,Oct.
"久保田雄介,吉野雅彦,中川佑貴","超微細塑性加工と焼鈍を組み合わせた微細金属構造の作製と光機能デバイスへの応用","第13回生産加工・工作機械部門講演会",,,,,"p. 306-310",2019,Oct.
"青柳友之,吉野雅彦,中川佑貴","微細エンボス加工による金属薄膜の加工特性の検討","第13回生産加工・工作機械部門講演会",,,,,,2019,Oct.
"中川佑貴,森謙一郎,吉野雅彦","3Dプリンティングとレーザー加熱によって製造されたCFRP部材の強度に及ぼす加工条件の影響","第70回塑性加工連合講演会","第70回塑性加工連合講演会講演論文集",,,,"  85-86",2019,Oct.
"Daixiu Wei,Yuichiro Koizumi,Makoto Nagasako,Yusuke Kubota,Tomoyuki Aoyagi,Yuki Nakagawa,Masahiko Yoshino,Akihiko Chiba,Hidemi Kato","Introducing dislocations locally in Al-supersaturated α2-Ti3Al single crystal via nanoscale wedge indentation",,"Intermetallics",,"Volume 113",,,2019,Oct.
"横谷圭亮,LuoZichao,山中晃徳,吉野雅彦,寺野元規,中川佑貴,駱自超","単結晶純鉄の引張試験による結晶内塑性変形特性の検討","2019年度塑性加工学会春季講演会","2019年度塑性加工学会春季講演会講演論文集",,,,"pp. 203-204",2019,June
"中川佑貴,森謙一郎,吉野雅彦","3Dプリンティングされた炭素繊維強化樹脂部品におけるレーザー加熱による高強度化","2019年度塑性加工春季講演会","2019年度塑性加工春季講演会講演論文集",,,,"  159-160",2019,June
"Masahiko Yoshino,Yusuke Kubota,Yuki Nakagawa,Motoki Terano","Efficient Fabrication Process of Ordered Metal Nanodot Arrays for Infrared Plasmonic Sensor",,"Micromachines",,"Vol. 10","No. 6","pp. 385",2019,June
"岩佐 洋祐,吉野雅彦,寺野元規","油性インクを用いた金微細構造作製法の検討","日本機械学会中国四国学生会第49回学生員卒業研究発表講演会",,,,,,2019,Mar.
"大村徹,吉野雅彦,南條 博,赤上 陽一,中村 竜太","病理診断用プレパラート作製におけるパラフィン試料の薄切機構の検討","2018年 精密工学会春季大会学術講演会講演会",,,,,,2019,
"吉野雅彦","微細塑性加工による材料機能開発","MF-Tokyo2017 大学研究室発表会",,,,,,2019,
"Zichao Luo,MASAHIKO YOSHINO,Motoki Terano,Akinori Yamanaka","Numerical study of tensile test of single crystal pure iron by crystal plasticity finite element model","第67回塑性加工連合講演会","第67回塑性加工連合講演会",,,,"pp. 257-256",2019,
"池田 光輝,岡田 直樹,寺野元規,吉野雅彦","超微細ライン＆スペース金属素子の効率的作製法の提案","平成29年度日本塑性加工学会中国・四国支部第18回学生研究発表会","平成29年度日本塑性加工学会中国・四国支部第18回学生研究発表会",,,,"p. 25-26",2019,
"Satoshi Nakajima,MASAHIKO YOSHINO,Motoki Terano","Efficient Fabrication Method of Ordered Metal Nanodot Array by Transferring to Plastic Films","ICPE2016",,,,,,2019,
"MASAHIKO YOSHINO,Potejanasak Potejana,Motoki Terano","New manufacturing process of metal nanowires on a substrate by combination of chemical stamping and sputter coating","3rd International Conference on Advanced Materials and Nanotechnology （ICAMN2016）",,,,,,2019,
"Hao Shen,MASAHIKO YOSHINO,Motoki Terano","Development of efficient fabrication process of metallic nanostructures for optical functional surfaces","ICPE2018",,,,,,2019,
"Tomoyuki Aoyagi,MASAHIKO YOSHINO,Motoki Terano,Sivanandam Aravindan,V.Rampogal Rao","Nano embossing for efficient fabrication of metallic nano structured elements","ICPE2018",,,,,,2019,
"吉野雅彦","分析装置の基礎および事例紹介","日本塑性加工学会第221回塑性加工技術セミナー「はじめての表面分析ー表面形状および結晶組織測定の基礎ー",,,,,,2019,
"吉野雅彦,PotejanaPotejanasak,TRUONGDUCPHUC,寺野元規","ケミカルスタンプによる金属膜微細構造の作製","日本機械学会2018年度年次大会",,,,,,2019,
"MASAHIKO YOSHINO,Motoki Terano","Nano Plastic Forming For Development Of Functional Surface","7th International Conference on Mechanics and Materials in Design","INEGI/FEUP","J.F. Silva Gomes and S.A. Meguid",,,,2019,
"大村徹,吉野雅彦,南條 博,赤上 陽一,中村 竜太","病理診断用プレパラート作製におけるパラフィン試料の薄切機構の検討","2018年 精密工学会春季大会学術講演会講演会",,,,,,2019,
"吉野雅彦","超微細塑性加工による機能表面の開発","MF-Tokyo2017 学会テクニカルセミナー",,,,,,2019,
"神藤亮平,吉野雅彦,寺野元規","超微細押込み加工による金属材料の加工特性","塑性加工連合講演会2018",,,,,,2018,Oct.
"神藤亮平,吉野雅彦,寺野元規","超微細押込み加工による金属材料の加工特性","塑性加工連合講演会2018",,,,,,2018,Oct.
"吉野雅彦,Abdallah  Abdelkawy,","硬脆材料の微細切削機構に及ぼす工具すくい角の影響","第12回生産加工・工作機械部門講演会",,,,,,2018,Oct.
"大村徹,吉野雅彦,南條博,赤上陽一,中村竜太,久住 孝幸","病理診断用プレパラート作製のためのパラフィン微細切削機構の検討","第12回生産加工・工作機械部門講演会",,,,,,2018,Oct.
"Ryandanu Priwanta Wuryanjono,MASAHIKO YOSHINO,Motoki Terano","Effect of Burnishing and Annealing Conditions on Microstructure Change of an Iron Plate","塑性加工連合講演会2018",,,,,,2018,Oct.
"Zichao Luo,MASAHIKO YOSHINO,Motoki Terano,Akinori Yamanaka","Prediction of static recrystallization nucleation sites in tensile deformed single crystal pure iron through a combination of in-situ EBSD and CP-FEM",,"Metals",,,,,2018,Oct.
"Zichao Luo,MASAHIKO YOSHINO,Motoki Terano,Akinori Yamanaka","Study on the impact of crystal orientation on plastic deformation and recrystallization through CP-FEM and in-situ EBSD observation","塑性加工連合講演会2018",,,,,,2018,Oct.
"永島史悠,吉野雅彦,寺野元規","純鉄の静的再結晶組織に及ぼす加工方法と熱処理条件の影響","塑性加工連合講演会2018",,,,,,2018,Oct.
"MASAHIKO YOSHINO,Potejanasak Potejana,Truong Phuc,Motoki Terano","Efficient Fabrication Method Of Metallic Nano/Micro Structures For Nano Devices, Integrity/Reliability/Failure in automotive, locomotive, aerospace, civil engineering and biomechanics","the 6th International Conference on Integrity, Reliability and Failure","Proceedings of the 6th International Conference on Integrity, Reliability and Failure",,,,"pp. 137-138",2018,July
"Hao Shen,MASAHIKO YOSHINO","Efficient Fabrication Process for Metallic Nanograting Combining Nanomachining and Cold Welding","2018年精密工学会春季大会学術講演会",,,,,,2018,Mar.
"池田光輝,岡田直樹,寺野元規,吉野雅彦","超微細ライン&スペースモールド作製法の検討","【中国四国支部】第40回「若手フォーラム」",,,,,,2018,Feb.
"寺野元規,吉野雅彦","プラズモニックセンサのための金属ナノドットアレイの効率的製造法",,"光アライアンアス",,,"  2月号","pp. 55-62",2018,Feb.
"MASAHIKO YOSHINO,Motoki Terano","Fabrication of Metallic Nanodot Arrays,",,"Micro and Nano Fabrication Technology, (Edited by Jiwang Yan) Part of the Micro/Nano Technologies book series","Springer, Singapore","Vol. 1",,"pp. 1-35",2018,Feb.
"青柳友之,Sivanandam Aravindan,寺野元規,吉野雅彦","エンボス加工による微細金属素子の作製","平成30年度塑性加工春季講演会","平成30年度塑性加工春季講演会",,,,"pp. 115-116",2018,
"Zichao Luo,MASAHIKO YOSHINO,Motoki Terano,Akinori Yamanaka","Study of texture evolution in single crystal iron static recrystallization through in-situ EBSD observation","MetalForming 2018","Procedia Manufacturing 15",,,"  15","  1565?1572",2018,
"永島史悠,吉野雅彦,寺野元規","純鉄の静的再結晶組織に及ぼすひずみ導入方法の影響","平成30年度塑性加工春季講演会","平成30年度塑性加工春季講演会",,,,"pp. 71-72",2018,
"吉野雅彦,寺野元規","自己組織化による金属ナノドットアレイの作製",,"トライボロジスト",,"  第63巻","  第10号","pp. 677-683",2018,
"Fang-Jung Shiou,Shih-Ju Huang,Albert J. Shih,Jiang Zhu,Masahiko Yoshino","Fine surface finish of a hardened stainless steel using a new burnishing tool",,"Procedia Manufacturing","Elsevier","Vol. 10",,"pp. 208-217",2017,July
"Motoki Terano,Fan Zhang,MASAHIKO YOSHINO","Influence of burnishing condition on static recrystallization of an iron sheet",,"Procedia Engineering",,"  207",,"pp. 1850-1855",2017,
"永島史悠,吉野雅彦,寺野元規","純鉄の静的再結晶に及ぼす剪断ひずみの影響","第68回塑性加工連合講演会","第68回塑性加工連合講演会講演論文集",,,,"pp. 47-48",2017,
"山下恭平,吉野雅彦,寺野元規","細胞損傷に及ぼす静水圧と温度の影響","日本機械学会2017年度年次大会","日本機械学会2017年度年次大会講演論文集",,,,"  J0220103",2017,
"吉野雅彦","ガラスの切削特性に及ぼす静水圧の影響","2017年度砥粒加工学会学術講演会","2017年度砥粒加工学会学術講演会講演論文集",,,"  E14","pp. 356-358",2017,
"神藤亮平,吉野雅彦,寺野元規","サブμmサイズの微細C型凸形状のホットエンボス加工","2017年度砥粒加工学会学術講演会","2017年度砥粒加工学会学術講演会講演論文集",,,"  E15","pp. 359-360",2017,
"Hao Shen,MASAHIKO YOSHINO,Motoki Terano,Truong Phuc","Fabrication of Metallic Micro Line and Space Structure by Chemical Stamping","2017年精密工学会春季大会学術講演会","2017年精密工学会春季大会学術講演会講演論文集",,,"No. 43","pp. 863-864",2017,
"Zichao Luo,MASAHIKO YOSHINO,Motoki Terano,Akinori Yamanaka","A study on crystalline microstructure control for development of functional surfaces","LEM21-2017",,,,,,2017,
"Hao Shen,MASAHIKO YOSHINO,Motoki Terano","Efficient Fabrication Process of Metallic Nanostructure for Optical Functional Surfaces","LEM21-2017",,,,,,2017,
"Motoki Terano,MASAHIKO YOSHINO,Fan Zhang","Influence of burnishing condition on static recrystallization of an iron sheet","International Conference on the Technology of Plasticity","Procedia Engineering",,"Volume 207",,"Page 1850?1855",2017,
"Potejanasak Potejana,MASAHIKO YOSHINO,Motoki Terano","Fabrication of Metallic Nanodot Arrays Using Nano Chemical Stamping Technique with a Polymer Stamp",,"Int. J. of Automation Technology",,"Vol. 10","No. 5","pp. 794-803",2016,Sept.
"MASAHIKO YOSHINO,Takayuki Ueno,Motoki Terano","Nano Texturing and Self-Organization Process for Development of Optical Functional Surface",,"Int. J. of Automation Technology",,"Vol. 10","No. 1","pp. 41-47",2016,
"吉野雅彦","光学表面機能の創出と微細加工技術",,"精密工学会誌",,"Vol. 82","No. 10","pp. 860-863",2016,
"MASAHIKO YOSHINO","Effects of External Hydrostatic Pressure on Orthogonal Cutting Characteristics",,"Procedia Manufacturing",,,,,2016,
"Goswami Arjyajyoti,S. Aravindan,P.V. Rao,Masahiko Yoshino","Structured Surfaces for Generation of Negative Index of Refraction",,"Critical Reviews in Solid State and Materials Sciences",,"Vol. 41","No. 5","pp. 367-385",2016,
"MASAHIKO YOSHINO,Satoshi Nakajima,Motoki Terano","Numerical simulation of tool wear in ductile mode machining of quartz glass","ICTMP2016",,,,,"  pp.256-363",2016,
"寺野元規,吉野雅彦,上野貴之","超微細塑性加工と自己組織化を用いた光メタマテリアル用二層ロッド構造共振素子の開発","日本機械学会2016年度年次大会","日本機械学会2016年度年次大会講演論文集",,"  J1610204",,,2016,
"佐伯和一郎,山下恭平,寺野元規,吉野雅彦","静水圧と冷却温度がメダカの卵に及ぼす影響","日本機械学会2016年度年次大会","日本機械学会2016年度年次大会講演論文集",,"  J0260106",,,2016,
"沈 浩,寺野元規,吉野雅彦","サファイアの切削加工に及ぼす材料異方性の影響","2016年度砥粒加工学会学術講演会","2016年度砥粒加工学会学術講演会講演論文集",,"  C12",,"p. .218-219",2016,
"PotejanaPotejanasak,吉野雅彦,寺野元規","ケミカルプリントによる超微細構造の作製","2016年度砥粒加工学会学術講演会","2016年度砥粒加工学会学術講演会講演論文集",,"  C13",,"p. 220-221",2016,
"吉野雅彦","超微細加工を用いた金属ナノドットアレイの製作と光学センサーへの応用","「元気の出る新技術講演会―産学・産産連携への集いー」2016年度精密工学会秋季講演会",,,,,,2016,
"寺野元規,吉野雅彦,伊藤 寛征,立花 繁明","金属薄膜自己凝集過程のin-situ SEM観察","日本顕微鏡学会 第72回学術講演会",,,,,,2016,
"MASAHIKO YOSHINO","Effects of External Hydrostatic Pressure on Orthogonal Cutting Characteristics","NAMRC4 Komanduri Symposium","Procecia Manufacturing",,"Volume XXX",,"Page 1-12",2016,
"Zhenxing Li,MASAHIKO YOSHINO,Tadaaki Nagao,Motoki Terano,Thang Duy Dao","Fabrication of plasmonic nanopillar arrays based on nanoforming, Microelectronic Engineering",,"Microelectronic Engineering",,"  139",,"pp. 7-12",2015,Apr.
"Katsuo Mogi,Yuki Hashimoto,Takehiko Tsukahara,Motoki Terano,Masahiko Yoshino,Takatoki Yamamoto","Nanometer-level high-accuracy molding using a photo-curable silicone elastomer by suppressing thermal shrinkage",,"Sensors","Royal Society of Chemistry","Vol. 22","No. 23","pp. 10172-10177",2015,Jan.
"MASAHIKO YOSHINO,Zhenxing Li,Motoki Terano","Theoretical and experimental study of metallic dot agglomeration induced by thermal dewetting",,"ASME Journal of Micro and Nano-Manufacturing",,"volume 3","  2",,2015,Jan.
"Takayuki Ueno,MASAHIKO YOSHINO,Motoki Terano","New fabrication method of metamaterial resonator by self-organization method","4M/ICOMM2015","proceedings of 4M/ICOMM2015",,,,"pp. 397-400",2015,
"吉野雅彦","超微細塑性加工による機能表面の開発","MF-TOKYO2015",,,,,,2015,
"吉野雅彦,寺野元規","機械的微細加工を利用した光学機能表面の開発","2015年精密工学会秋季大会シンポジウム","超精密加工による表面機能創成とその工学・医学への応用",,,,"pp. 37-40",2015,
"吉野雅彦","金属ナノドットアレイ作製のためのテンプレーテッド熱デウェッティング基板の超微細切削加工","マイクロ・ナノ工学シンポジウム",,,,,,2015,
"寺野元規,吉野雅彦,矢部慎太郎","純鉄単結晶における静的再結晶過程に及ぼす塑性変形の影響","平成27年度塑性加工連合講演会",,,,,,2015,
"Potejanasak Potejana,MASAHIKO YOSHINO,Motoki Terano,Masahiro Mita","Efficient Fabrication Process of Metal Nanodot Arrays Using Direct Nanoimprinting Method with a Polymer Mold",,"Int. J. of Automation Technology",,"Vol. 9","No. 6","pp. 629-635",2015,
"吉野雅彦,佐伯和一郎,寺野元規,井上優樹","高静水圧下において不凍結冷却された細胞のin-situ観察","日本機械学会2015年度年次大会講演論文集","日本機械学会2015年度年次大会講演論文集",,,,,2015,
"中島慧,吉野雅彦,寺野元規","超精密切削加工を利用した金属ナノドットアレイの効率的製造法の検討","日本機械学会2015年度年次大会","日本機械学会2015年度年次大会講演論文集",,,,,2015,
"上野貴之,吉野雅彦,寺野元規","超微細塑性加工と自己組織化を用いた光機能表面の開発","日本機械学会2015年度年次大会","日本機械学会2015年度年次大会講演論文集",,,,,2015,
"寺野元規,吉野雅彦,李振星","超微細塑性加工と熱デウェッティング法を組み合わせた３次元金属ナノドット構造体の効率的製造法","ABTEC2015",,,,,"pp. 205-206",2015,
"吉野雅彦,中島慧,寺野元規","ダイヤモンド工具による石英ガラスの超微細切削加工","ABTEC2015",,,,,"pp. 203-204",2015,
"Takayuki Ueno,MASAHIKO YOSHINO,Motoki Terano","Development of Double Layer Nano-rod Resonators by Utilizing the Templated Thermal Dewetting Method","LEM21_2015","proceedings of LEM21_2015",,,,,2015,
"Shintarou Yabe,MASAHIKO YOSHINO,Motoki Terano","Fundamental study on crystalline structure for development of near functional surface","LEM21_2015","proceedings of LEM21_2015",,,,,2015,
"Potejanasak Potejana,MASAHIKO YOSHINO,Motoki Terano","Fabrication of nanodot arrays by the template thermal dewetting method using nano chemical stamp technique","LEM21_2015","proceedings of LEM21_2015",,,,,2015,
"MASAHIKO YOSHINO,Satoshi Nakajima,Motoki Terano","Tool wear of a single-crystal diamond tool in nano-groove machining of a quartz glass plate",,"Surface, Topography, Material & Property",,"Vol. 3","No. 4",,2015,
"廣澤勇二,吉野雅彦,寺野元規,鳥塚史郎","鉄板の再結晶過程に対する微細せん断加工の影響","平成27年度塑性加工春季講演会","平成27年度塑性加工春季講演会講演論文集",,,,,2015,
"Potejanasak Potejana,MASAHIKO YOSHINO,Jermwiwat  Amornrit,Sivanandam Aravindan,Motoki Terano","Nano imprinting of optical metamaterial resonators on an Aluminium foil","平成27年度塑性加工春季講演会","平成27年度塑性加工春季講演会講演論文集",,,,,2015,
"Waichiro Saiki,MASAHIKO YOSHINO,Motoki Terano,Yuuki Inoue","EXPERIMENTAL DEVICE FOR NON CRYOPRESERVATION OF LIVING CELLS UNDER HIGH HYDROSTATIC PRESSURE","International Forum on MicroManufacturing & Biofabrication ’15, IFMM’15&IFBF’15",,,,,,2015,
"Dai-Xiu  Wei,MASAHIKO YOSHINO,Yuichiro Koizumi,Akinori Yamanaka,Yungping Li,Akihiko  Chiba","Control ofγlamella precipitation in Ti?39 at.% Al single crystals4 by nanogroove-induced dislocation bands",,"Acta Materialia",,"  96",,"pp. 352-365",2015,
"佐伯和一郎,吉野雅彦,寺野元規","高静水圧を利用した細胞の氷点下不凍結保存方法の検討","関東学生会第54回学生員卒業研究発表講演","関東学生会第54回学生員卒業研究発表講演前刷集",,,,,2015,
"中島慧,吉野雅彦,寺野元規","超精密切削加工による金属ナノドットアレイ用テンプレート基板の作製","関東学生会第54回学生員卒業研究発表講演","関東学生会第54回学生員卒業研究発表講演前刷集",,,,,2015,
"Motoki Terano,MASAHIKO YOSHINO,Yuji Hirosawa,Shiro Torizuka","Microstructure change by micro metal forming of sheet iron","4M/ICOMM2015","proceedings of 4M/ICOMM2015",,,,"pp. 226-229",2015,
"吉野雅彦,上野貴之,寺野元規","超微細塑性加工を利用した光メタマテリアルのための二層ロッド型微細共振子の開発","2015年度精密工学会春季大会","2015年度精密工学会春季大会論文集",,,,"p. 841-842",2015,
"MASAHIKO YOSHINO,Zhenxing Li,Motoki Terano,Tadaaki Nagao","Efficient fabrication methods of various 3D nanodot array structures","4M/ICOMM2015","proceedings of 4M/ICOMM2015",,,,"pp. 393-396",2015,
"Potejanasak Potejana,MASAHIKO YOSHINO,Motoki Terano,Masahiro Mita","A Study of Efficient Fabrication Method of Metal Dot Array Using the Micro Metal Forming a Polymer Mold","7th JSTP International Seminar on Precision Forging","Proceedings of the 7th JSTP International Seminar on Precision Forging",,,,"pp. 127-130",2015,
"PotejanaPotejanasak,吉野雅彦,寺野元規,三田正弘","Direct nano-imprinting on Au coating layer by a polymer film mold for the templated thermal dewetting method","日本機械学会第6回マイクロ・ナノ工学シンポジウム","日本機械学会第6回マイクロ・ナノ工学シンポジウム講演論文集",,,,,2014,Oct.
"Shintarou Yabe,Motoki Terano,MASAHIKO YOSHINO","Plane strain compression test and simple shear test of single crystal pure iron","11th International Conference on Technology of Plasticity, ICTP2014","Procedia Engineering",,"Vol. 81",,"pp. 1342-1347",2014,Oct.
"上野貴之,吉野雅彦,松村 隆,寺野元規","光メタマテリアル用共振素子パターン作製のための超微細塑性加工法","砥粒加工学会",,,,,,2014,Sept.
"吉野雅彦,保土田亮,TRUONG DUCPHUC,寺野元規","プラスチック基板上に規則配列した金属ナノドットアレイの効率的製造法","2014年度日本機械学会年次大会","2014年度日本機械学会年次大会講演論文集",,,,,2014,Sept.
"寺野元規,吉野雅彦","純鉄板の表面性状に及ぼすバニシング加工条件の影響","砥粒加工学会",,,,,,2014,Sept.
"Zhenxing Li,Thang Duy Dao,Tadaaki Nagao,MASAHIKO YOSHINO","Optical properties of ordered dot-on-plate nano-sandwich arrays",,"Microelectronic Engineering",,,"No. 127","pp. 34-39",2014,Jan.
"Motoki Terano,Kazuhiko Kitamura,Shusaku Miyata,MASAHIKO YOSHINO","Distribution of plastic anisotropy in thickness direction for plate","11th International Conference on Technology of Plasticity, ICTP2014","Procedia Engineering",,"Vol. 81",,"pp. 419-424",2014,
"MASAHIKO YOSHINO,Akihiro Nagamatsu,Zhenxing Li,Motoki Terano","LSPR Properties of Metallic Nanodot Arrays Fabricated by the Nano Plastic Forming and Annealing process","ICPE2014","Proceedings of ICPE2014",,,,,2014,
"Dai-Xiu  Wei,MASAHIKO YOSHINO,Yuichiro Koizumi,Hiroaki  Nishiyama,Akinori Yamanaka,Shinpei  Miyamoto,Kyosuke Yoshimi,Akihiko  Chiba","Nanoplastic deformation on Ti?39 at.% Al single crystals for manipulation of every single γ lamella",,"Acta Materialia",,"  76",,"pp. 331-341",2014,
"Zhenxing Li,Dao Duy Thang,Tadaaki Nagao,Motoki Terano,MASAHIKO YOSHINO","Fabrication of nanopillar arrays for high-performance surface enhanced Roman scattering","日本機械学会 第10回 生産加工・工作機械部門講演会",,,,,,2014,
"寺野元規,Potejana Potejanasak,保土田,吉野雅彦,三田 正弘","ナノインプリントを利用した金属ナノドットアレイの効率的製造法の検討","2014年度精密工学会秋季大会",,,,,,2014,
"Yuji Hirosawa,Motoki Terano,MASAHIKO YOSHINO","Influence of repeated shear strain on recrystallization of iron sheet","11th International Conference on Technology of Plasticity, ICTP2014","Procedia Engineering",,"Vol. 8",,"pp. 1324-1329",2014,
"Takayuki Ueno,Motoki Terano,MASAHIKO YOSHINO","Templated thermal dewetting process by utilizing nano plastic forming technology","11th International Conference on Technology of Plasticity, ICTP2014","Procedia Engineering",,"Vol. 81",,"pp. 1469-1474",2014,
"吉野雅彦,永松明浩,李 振星,山中晃徳,山本貴富喜","超微細塑性加工と焼鈍法の組合せにより作製した金属ナノドットアレイの光学特性",,"日本機械学会論文集",,"Vol. 80","No. 817","pp. 1-13",2014,
"吉野雅彦,TRUONGDUCPHUC,寺野元規","パターニングした基板を用いた焼鈍法による金属ナノドットアレイの作製法","2014年度精密工学会春季大会学術講演会","2014年度精密工学会春季大会学術講演会講演論文集",,,,"pp. 941-942",2014,
"LiZhenxing,Dao Duy Thang,長尾 忠昭,吉野雅彦","積層型金属ナノ構造アレイを用いた表面増強ランマン散乱","第６１回応用物理学会春季学術講演会","第６１回応用物理学会春季学術講演会 講演予稿集",,,,"pp. 3-173",2014,
"吉野雅彦","微細塑性加工を用いた鉄の結晶方位制御","第１１回助成研究成果発表会",,,,,,2014,
"MASAHIKO YOSHINO,Youhei Shimizu,kentarou kouno,Motoki Terano","Effects Of External Hydrostatic Pressure On Finished Surface In Silicon Cutting","ICTMP 2014","Proceedings of ICTMP 2014",,,,,2014,
"MASAHIKO YOSHINO,Motoki Terano,Ryou Hotoda,Masahiro Mita","Development of a nano structured foil mold for the templated thermal dewetting of a nano dot array","JSME/ASME 2014 International Conference on Materials and Processing","Proceedings of the JSME/ASME 2014 International Conference on Materials and Processing",,,,,2014,
"MASAHIKO YOSHINO,Zhenxing Li,Motoki Terano","Theoretical and experimental study of metallic dot agglomeration induced by thermal dewetting","ICOMM2014",,,,,,2014,
"Zhenxing Li,MASAHIKO YOSHINO","Rapid fabrication of ordered plasmonic nanostructures: from nanoblocks to nanorods","ICOMM2014",,,,,,2014,
"MASAHIKO YOSHINO,Youhei Shimizu,kentarou kouno,Motoki Terano","Effects Of External Hydrostatic Pressure On Finished Surface In Silicon Cutting",,"Advanced Materials Research",,"Vol. 966-967",,"pp. 129-136",2014,
"Truong Phuc,Motoki Terano,MASAHIKO YOSHINO","Fabrication of an ordered nano dot array by thermal dewetting on a patterned substrate",,"Manufacturing Letter",,,,,2014,
"Zhenxing Li,MASAHIKO YOSHINO,Akinori Yamanaka","Regularly-formed three-dimensional gold nanodot array with controllable optical properties",,"J. Micromesh. Microeng",,"Vol. 24",,,2014,
"Truong Phuc,MASAHIKO YOSHINO,Akinori Yamanaka,Takatoki Yamamoto","Effects of Morphology of Nanodots on LSPR property",,"Int. J. of Automation Technology",,"Vol. 8","No. 1","pp. 74-82",2014,
"Masahiko YOSHINO,Kohei IBUKI,Akinori YAMANAKA","Static recrystallization mechanism in single crystal metals","AMPT2013","Proceedings of AMPT2013",,,,,2013,Sept.
"Masahiko Yoshino,Sivanandam Aravindan,Zhenxing Li,Akinori Yamanaka","Nano Plastic Forming for development of various functional surfaces","INCAMA 2013",,,,,,2013,Mar.
"Truong  Duc Phuc,Akinori Yamanaka,Masahiko Yoshino,Takatoki Yamamoto","Fabrication of gold nanodot array on plastic films for bio-sensing applications","The First CIRP Conference on Biomanufacturing","Proceedings of  The First CIRP Conference on Biomanufacturing",,,,"pp. 47-52",2013,Mar.
"吉野 雅彦,Truong  Duc Phuc,山中 晃徳,山本 貴富喜","プラスチック板上に配列したナノドットアレイの効率的製造法","精密工学会平成25年春季講演会","精密工学会平成25年春季講演会講演論文集",,,,"pp. 303-304",2013,Mar.
"廣澤 勇二,寺野 元規,吉野 雅彦,鳥塚 史郎","鉄板の組織変化に及ぼすせん断ひずみの影響","平成25年度塑性加工秋季連合講演会","平成25年度塑性加工秋季連合講演会講演論文集",,,,,2013,
"吉野 雅彦,永松 明浩,二宮 崚","金属ナノドットアレイの光学的特性","日本機械学会 2013年度年次大会","日本機械学会 2013年度年次大会講演論文集CD",,,,,2013,
"吉野 雅彦,伊吹 康平,鳥塚 史郎,山中 晃徳","微細塑性加工を用いた単結晶鉄の静的再結晶挙動の検討","平成25年度塑性加工春季講演会","平成25年度塑性加工春季講演会講演論文集",,,,,2013,
"吉野雅彦","微細塑性加工を用いた結晶方位制御",,"Form Tech Review",,"Vol. 23","No. 1","pp. 61-66",2013,
"保土田 亮,三田 正弘,吉野 雅彦","精密切削による金属ナノドットアレイ作製用モールドの開発","精密工学会平成25年春季講演会","精密工学会平成25年春季講演会講演論文集",,,,"pp. 301-302",2013,
"Zhenxing Lia,Masahiko Yoshinoa*,Akinori Yamanaka,MASAHIKO YOSHINO","Optical properties of multilayer ordered gold nanodot array fabricated by thermal dewetting method","The First CIRP Conference on Biomanufacturing","Proceedings of  The First CIRP Conference on Biomanufacturing",,,,"pp. .42-46",2013,
"寺野元規,北村憲彦,吉野 雅彦","微小材料の塑性変形形状に及ぼす塑性異方性の影響","機械学会第５回マイクロナノ工学シンポジウム","機械学会第５回マイクロナノ工学シンポジウム講演論文集",,,,"pp. 287-288",2013,
"吉野 雅彦,Truong Duc Phuc","焼鈍法により生成した金属ナノドットの形態とそのLSPR特性","機機械学会第５回マイクロナノ工学シンポジウム","機機械学会第５回マイクロナノ工学シンポジウム講演論文集",,,,,2013,
"河野健太郎,吉野 雅彦,寺野元規","シリコンの微細切削における加工変質層に及ぼす高静水圧の影響","機械学会第５回マイクロナノ工学シンポジウム","機械学会第５回マイクロナノ工学シンポジウム講演論文集",,,,"pp. 21-22",2013,
"吉野雅彦,大竹尚登,山本貴富喜,山中晃徳,中村吉男,安田公一,齊藤卓志,源関聡,津島将司,黒川悠,井上裕嗣,山?敬久,野崎智洋,鈴木俊明,梅原徳次,近藤行人,松村隆,楊明,月山陽介,益満秀治,赤上陽一,久住孝幸,上坂裕之,野老山貴行,品川一成,新保實,平山朋子,早川邦夫,坂井田喜久,鈴木清一,柏谷智","機械屋のための分析装置ガイドブック（日本塑性加工学会編）",,,"コロナ社",,,"pp. 167-177",2012,Aug.
"山中 晃徳,吉野 雅彦","超微細塑性加工を用いて作製した規則的金ナノドットアレイ","平成24年度塑性加工春季講演会","平成24年度塑性加工春季講演会講演論文集",,,,"pp. 309-310",2012,June
"保土田 亮,山中 晃徳,吉野 雅彦","微細構造を有する薄膜モールドを用いた、金属ナノドットアレイの効率的作製法","平成24年度塑性加工春季講演会","平成24年度塑性加工春季講演会講演論文集",,,,"pp. 313-314",2012,June
"Masahiko Yoshino,Hiroki Osawa,Akinori Yamanaka","Effects of Process Conditions on Nano-dot Array Formation by Thermal Dewetting","NAMRC40/MSEC/ICTMP5","Proceedings of NAMRC40/MSEC",,,,,2012,June
"永松明浩,吉野雅彦,山中晃徳,山本貴富喜","超微細塑性加工により作製した金属ナノドットアレイのバイオセンシングへの応用","平成24年度塑性加工春季講演会","平成24年度塑性加工春季講演会講演論文集",,,,"pp. 311-312",2012,June
"Truong Duc Phuc,Akinori Yamanaka,Masahiko Yoshino","Study on nano dots formation by thermal dewetting and transfer to plastic films","2012年精密工学会春季大会学術講演会","2012年精密工学会春季大会学術講演会講演論文集",,,,"pp. 61-62",2012,Mar.
"Zhenxing Li,Akinori Yamanaka,Masahiko Yoshino","Fabrication of multilayer ordered metallic nano-dot arrays by nano plastic forming and thermal dewetting process","2012年精密工学会春季大会学術講演会","2012年精密工学会春季大会学術講演会講演論文集",,,,"pp. 63-64",2012,Mar.
"吉野 雅彦,大澤 裕樹,山中 晃徳","焼鈍法による金属ナノドットアレイの生成に及ぼす影響因子","2012年精密工学会春季大会学術講演会","2012年精密工学会春季大会学術講演会講演論文集",,,,"pp. 35-36",2012,Mar.
"Akinori Yamanaka,Zhenxing Li,Masahiko Yoshino","MPF-FDTD Simulations of Fabrication and Optical Analysis of Ordered Gold Nano-Dots Array",,"ICPE2012",,"Vol. 523-524",,"pp. 621-626",2012,Jan.
"Zhenxing Li,Akinori Yamanaka,Masahiko Yoshino","A New Process to Fabricate Three Dimensional Ordered Nano Dot Array Structures by Nano Plastic Forming and Dewetting","ICPE2012","Proceedings of ICPE2012",,,,,2012,
"Kohei Ibuki,Akinori Yamanaka,Masahiko Yoshino","EBSD Analysis of Static Recrystallized Microstructure Formed by Nano Plastic Forming and Annealing","MetalForming 2012","Proceedings of MetalForming 2012",,,,"pp. 747-750",2012,
"Masahiko YOSHINO,Ryo HODOTA,Akinori Yamanaka,Willy Kurni","Roller nano-imprinting process for rapid fabrication of functional surfaces","MetalForming 2012","Proceedings of MetalForming 2012",,,,"pp. 743-750",2012,
"Zhenxing Li,Akinori Yamanaka,Masahiko Yoshino","A New Process to Fabricate Three Dimensional Ordered Nano Dot Array Structures by Nano Plastic Forming and Dewetting",,"Key Engineering Materials",,"vol. 523-524",,"pp. 627-632",2012,
"Masahiko Yoshino,Hiroki Osawa,Akinori Yamanaka","Effects of process conditions on nano-dot array formation by thermal dewetting",,"Journal of Manufacturing Processes",,"vol. 14","no. 4","pp. 478-486",2012,
"Li Zhenxing,Masahiko Yoshino,Akinori Yamanaka","Fabrication of three dimensional ordered nanodot array structures by thermal dewetting method",,"Nanotechnology",,,"no. 23",,2012,
"保土田 亮,山中 晃徳,吉野 雅彦","TiN 薄膜モールドを用いたナノインプリント法と焼鈍法による規則的金属ナノドットアレイの効率的創製",,"日本機械学会論文集C編",,"vol. 78","no. 796","p. 3995",2012,
"Takashi Matsumura,Fumio Iida,Takuya Hirose,Masahiko Yoshino","Micro machining for control of wettability with surface topography",,"Journal of Materials Processing Technology",,,"No. 212","pp. 2669? 2677",2012,
"吉野雅彦,Li Zhenxing,山中晃徳","焼鈍法による金属ナノドットアレイの凝集機構","平成２４年度機械学会年次大会","平成２４年度機械学会年次大会講演論文集",,,,,2012,
"吉野雅彦,山中晃徳,Li Zhenxing","焼鈍法による金属ナノドット凝集におけるドット寸法の制御因子","2012年精密工学会秋期大会学術講演会","2012年精密工学会秋期大会学術講演会講演論文集",,"  M36",,"pp. 903-904",2012,
"Hassan Rashidi,Masahiko Yoshino","Nanofabrication of arbitrary patterns by nano plastic forming and etching (NPFE)",,"Int J Adv Manuf Technol",,,,,2012,
"吉野 雅彦,山中 晃徳,李振星","焼鈍法による三次元ナノドットアレイの作成","日本機械学会第４回マイクロナノ工学シンポジウム","日本機械学会第４回マイクロナノ工学シンポジウム講演論文集",,,,,2012,
"吉野 雅彦,保土田亮,永松明浩,山中 晃徳","光学機能表面のための金属ナノドットアレイの効率的製造法","日本機械学会、第９回 生産加工・工作機械部門講演会","日本機械学会、第９回 生産加工・工作機械部門講演会講演論文集",,,,"pp. 171-172",2012,
")M.Yoshino,K.Willy,A.Yamanaka","Micro- and Nanostructured Surface Development by Nano Plastic Forming and Roller Imprinting",,"Micromanufacturing Processes (Edited by V.K.Jain)","CRC Press",,,"pp. 243-261",2012,
"吉野 雅彦,山中 晃徳","金属ナノドットアレイの効率的製造法",,"コンバーテック",,,"No. 12","pp. 82-86",2012,
"Truong Duc Phuc,Akinori Yamanaka,Masahiko Yoshino","High Throughput Method to Fabricate Ordered Nano Dot Array on Various Plastic Films","ICPE2012","Proceedings of ICPE2012",,,,,2012,
"吉野雅彦,Li Zhenxing,山中晃徳","焼鈍法による金属ナノドットアレイの凝集機構","平成２４年度機械学会年次大会","平成２４年度機械学会年次大会講演論文集",,,,,2012,
"Akinori Yamanaka,Hiroki Osawa,Masahiko Yoshino","Optical Properties of Ordered Metal Nano-dots Allay Fabricated by Nano Plastic Forming and Annealing","ICTP 2011","Steel Research international special edition 10th ICTP 2011",,,,"pp. 997-1001",2011,Sept.
"山中 晃徳,吉野 雅彦","微細塑性加工による規則的ナノドットアレイ形成のMulti-Phase-Fieldシミュレーション","日本機械学会 2011年度年次大会","日本機械学会 2011年度年次大会CD",,,,,2011,Aug.
"山中 晃徳,大澤 裕樹,吉野 雅彦","超微細塑性加工と焼鈍により作製されたナノドットアレイの光学特性","平成23年度(第42回)塑性加工春季講演会","平成23年度(第42回)塑性加工春季講演会講演論文集",,,,"pp. 193-194",2011,Aug.
"伊吹 康平,山中 晃徳,吉野 雅彦","微細塑性加工と焼鈍による単結晶金属の静的再結晶挙動","日本機械学会 2011年度年次大会","日本機械学会 2011年度年次大会CD",,,,,2011,Aug.
"Masahiko Yoshino,Hiroki Ohsawa,Akinori Yamanaka","Rapid Fabrication of an ordered nano-dot array by combination of nano plastic forming and annealing method",,"J. Micromech. Microeng",,"Vol. 21",,"  125017",2011,Aug.
"吉野雅彦","超微細塑性加工による材料機能開発","日本塑性加工学会マイクロ・ナノ加工分科会",,,,,,2011,July
"大澤裕樹,山中晃徳,WILLYKURNIA,吉野雅彦","超微細塑性加工と自己組織化による規則配列した金ナノドットアレイの創製",,"日本機械学会論文集C編","日本機械学会","Vol. 77","No. 775","pp. 1143-1153",2011,Apr.
"Masahiko Yoshino,Kazuaki Uchida","Indentation Test of Soda Glass under High Hydrostatic Pressure","ICOMM2011","Proceedings of ICOMM2011",,,,"pp. 49-52",2011,Mar.
"吉野雅彦,大澤 裕樹,山中 晃徳","超微細塑性加工と焼鈍を利用した規則的ナノドットアレイの効率的製造法",,"2011年精密工学会春季大会講演論文集",,,,"pp. 1013-1014",2011,Mar.
"吉野雅彦","硬脆材料の微細塑性加工",,"マイクロ・ナノ領域の超精密技術","オーム社",,,"pp. 16-24",2011,Mar.
"杉田精司,吉野雅彦,山中晃徳","高静水圧環境における硬脆材料の変形特性の検討",,"日本機械学会関東支部第１６期総会講演会講演論文集",,,,,2011,Mar.
"Hassan Rashidi,Masahiko Yoshino","Nanomanufacturing of densely packed ultra-fine nanostructures by nano plastic forming and etching (NPFE)",,"International Journal of Advanced Manufacturing Technology",,"Vol. 57","No. 5-8","pp. 605-615",2011,Mar.
"Akinori YAMANAKA,Hiroki Osawa,Willy Kurnia,Masahiko Yoshino","Fabrication of Ordered Gold Nano-dots Array using Nano Plastic Forming and Self-assembly",,"Proceedings of ICOMM2011",,,,"pp. 133-138",2011,Mar.
"吉野 雅彦,山中 晃徳,Willy Kurnia,松村 隆,小林 真佐男","ローラーナノインプリントによる材料表面機能の改質","平成23年度(第42回)塑性加工春季講演会","平成23年度(第42回)塑性加工春季講演会講演論文集",,,,"pp. 195-196",2011,
"吉野 雅彦,山中 晃徳","超微細塑性加工による機能表面・機能材料の開発",,"塑性と加工",,"Vol. 52","No. 610","pp. 1163-1167",2011,
"Masahiko Yoshino,Willy Kurnia,Akinori Yamanaka,Takashi Matsumura","Modification of Surface Properties by Roller Nano/Micro-Imprinting Processes",,"Steel Research international special edition 10th ICTP 2011",,,,"pp. 1008-1013",2011,
"Masahiko YOSHINO,Masao KOBAYASHI,Akinori YAMANAKA","Development of nanostructured foil mold for roller nano imprint process","LEM21","Proceedings of LEM21",,,,"pp. 3250",2011,
"Zhenxing Li,Akinori Yamanaka,Masahiko Yoshino","Fabrication of multilayer nano dot array structures by combination of coating, nano plastic forming and annealing process","4th Asian Workshop on Nano/Micro Forming Technology","Proceedings of 4th Asian Workshop on Nano/Micro Forming Technology",,,,"pp. 29-30",2011,
"Kohei IBUKI,Akinori YAMANAKA,Masahiko YOSHINO","Development of metallic microstructure control method by using Nano Plastic Forming","LEM21","Proceedings of LEM21",,,,"pp. 3279",2011,
"Akinori YAMANAKA,Masahiko YOSHINO","Finite-Difference-Time-Domain Analysis of Optical Properties of Ordered Nano-Dots Array Fabricated with Nano Plastic Forming","LEM21","Proceedings of LEM21",,,,"pp. 3397",2011,
"清水洋平,吉野雅彦,山中晃徳","高静水圧環境におけるシリコンウエハの切削実験","日本機械学会 第8回生産加工・工作機械部門講演会","日本機械学会 第8回生産加工・工作機械部門講演会 講演論文集",,,"No. 10-11","pp. 155-156",2010,Nov.
"吉野雅彦,生田目祥行,山中晃徳","高静水圧環境下における二次元切削実験","日本機械学会 第8回生産加工・工作機械部門講演会","日本機械学会 第8回生産加工・工作機械部門講演会 講演論文集",,,"No. 10-11","pp. 259-260",2010,Nov.
"Hassan Rashidi,Masahiko Yoshino","Influence of Mask-Substrate Adhesion on Mask Patterning in Nano Plastic Forming and Etching (NPFE) Process",,"Proc. The 14th International Conference on Mechatronics Technology (ICMT2010)",,,,"pp. 226-231",2010,Nov.
"Masahiko YOSHINO,Namatame YOSHIYUKI,Naoki YOSHIKAWA,Youhei SHIMIZU,Akinori YAMANAKA","Effects of External Hydrostatic Pressure on Machining Properties of Hard-Brittle Materials",,"Proceedings of 4th CIRP International Conference on High Performance Cutting HPC2010",,,,"pp. 175-178",2010,Nov.
"大澤裕樹,吉野雅彦,山中晃徳,Willy Kurnia","超微細塑性加工を利用した二次元規則配列ナノドットアレイの効率的製造法の開発","日本機械学会 第8回生産加工・工作機械部門講演会","日本機械学会 第8回生産加工・工作機械部門講演会 講演論文集",,,"No. 10-11","pp. 127-128",2010,Nov.
"Masahiko Yoshino,Naoki Yoshikawa,Kazuaki Uchida","Plastic Forming of Hard Brittle Materials under External Hydrostatic Pressure",,"Steel Research international, Special Edition : MetalForming2010",,,,"pp. 1054-1057",2010,Oct.
"吉野雅彦,HASSANRASHIDI,山中晃徳","超微細塑性加工と異方性エッチングを利用した微細溝加工","日本機械学会 2010年度年次大会","日本機械学会 2010年度年次大会 講演論文集",,,"No. 10-1","pp. 239-240",2010,Sept.
"Akinori Yamanaka,tsuyoshi kawanishi,atsuki oto,MASAHIKO YOSHINO","Crystal Plasticity Finite Element Analysis of Deformation Behavior of a Single Crystal Copper by Nano Plastic Forming",,"Steel Research International",,"Vol. 81","No. 9","pp. 1434-1437",2010,Sept.
"山中晃徳,吉野雅彦","Phase-Field法と均質化法に基づくDP鋼の上均質変形解析","日本機械学会 第23回計算力学講演会","日本機械学会 第23回計算力学講演会 講演論文集",,,"No. 10-2","pp. 107-108",2010,Sept.
"山中晃徳,川西毅,吉野雅彦","マイクロインデンテーションによる単結晶金属内の塑性変形組織の形成","日本機械学会 2010年度年次大会","日本機械学会 2010年度年次大会 講演論文集",,,"No. 10-1","pp. 267-268",2010,Sept.
"Hassan Rashidi,Masahiko Yoshino","Fabrication of sub-20 nm nanostructures by combination of nano plastic forming and etching (NPFE)",,"J. Micromech. Microeng.",,"Vol. 20",,,2010,Aug.
"Willy Kurnia,Masahiko Yoshino","Rapid Fabrication Of Functional Surface Using The Combination Of Nano Plastic Forming, Coating, And Roller Imprinting Process","ICTMP2010","Proc. ICTMP2010",,,,"pp. .365-374",2010,June
"Takashi MATSUMURA,Takuya HIROSE,Masahiko YOSHINO,Noritsugu UMEHARA","Control of wettability with micro-scale structure on functional surface","ICTMP2010","Proc. ICTMP2010",,,,"pp. 375-382",2010,June
"MASAHIKO YOSHINO,R Okabe,H Ohsawa,A Yamanaka,T Matsumura","Efficient Fabrication Process Of Optical Functional Surfaces By Using Nano Plastic Forming","ICTMP2010","Proc. ICTMP2010",,,,,2010,June
"山中晃徳,川西毅,大藤惇生,吉野雅彦","微細塑性加工により誘起される再結晶組織と加工変形組織の解析","平成２２年度塑性加工春季講演会","平成２２年度塑性加工春季講演会講演論文集",,,,"pp. 243-244",2010,May
"Masahiko Yoshino,Sivanandam Aravindan,Takashi Matsumura","Chapter 11.Functional Surface Development by Nano Plastic Forming",,"Nanomaterials: Properties, Preparation and Processes","NOVA SCIENCE PUBLISHERS",,,"pp. 381-394",2010,May
"M. Yoshino,R. Hibino,N. Minami,H. Kimura,T. Matsumura,N.Umehara","Change of crystalline structure of single crystal metals by nano/micro plastic forming","ESAFORM2009","International Journal of Material Forming","Springer","Vol. 2","  Suuppl 1","pp. 629-632",2010,Mar.
"川西毅,大藤惇生,山中晃徳,吉野雅彦","微細塑性加工により誘起される単結晶の静的再結晶挙動","日本機械学会 関東支部第16期総会講演会","日本機械学会 関東支部第16期総会講演会 講演論文集",,,"No. 100-1","pp. 501-502",2010,Mar.
"Willy Kurnia,Masahiko Yoshino","Modification of surface optical properties and wettability using the combination of Nano Plastic Forming","Regional Conference on Mechanical and Aerospace Technology (in Bali)","Proc. Regional Conference on Mechanical and Aerospace Technology (in Bali)",,,,,2010,Feb.
"Tsuyoshi KAWANISHI,Akinori YAMANAKA,Masahiko YOSHINO,Ryo HIBINO,Hidehiko KIMURA","Microstructure Control by Nano/micro Plastic Forming for Functional Metallic Material",,"Proc. LEM21",,,,"pp. 297-300",2009,Dec.
"Yohei SHIMIZU,Masahiko YOSHINO,Naoki YOSHIKAWA","Development of lathe type NC cutting device for machining under high hydrostatic pressure",,"Proc.LEM21",,,,"pp. 421-424",2009,Dec.
"Hassan RASHIDI,Masahiko YOSHINO","New Approach to Nanofabrication with Non-photolithographic Pattern Transfer by Nano Plastic Forming (NPF) and Etching Processes",,"Proc. LEM21",,,,"pp. 289-292",2009,Dec.
"Akinori YAMANAKA,Tsuyoshi KAWANISHI,Masahiko YOSHINO","Crystal Plasticity Finite Element Simulation of Nano/Micro Plastic Forming for Metallic Material",,"Proc. LEM21",,,,"pp. 293-296",2009,Dec.
"Naoki YOSHIKAWA,Kazuaki UCHIDA,Masahiko YOSHINO","Multi-tasking machining process under high hydrostatic pressure",,"Proc.LEM21",,,,"pp. 417-420",2009,Dec.
"Yoshiyuki NAMATAME,Masahiko YOSHINO","Machining properties of hard-brittle materials under high external hydrostatic pressure",,"Proc. LEM21",,,,"pp. 413-416",2009,Dec.
"Willy KURNIA,Masahiko YOSHINO","Nano Plastic Forming-Coating-Roller Imprinting (NPF-CRI) Process for Rapid Fabrication Technique of Nano and Micro Structures",,"Proc. LEM21",,,,"pp. 285-288",2009,Dec.
"Hiroki Osawa,Masahiko Yoshino","Development of ordered nano structure surface by using nano plastic forming",,"Proc. LEM21",,,,"pp. 297-300",2009,Dec.
"Aravindan Sivanandam,P.V.Rao,Masahiko Yoshino","Focused Ion Beam Machining",,"Introduction to Micromachining (Editor V.K.Jain)","Naroza",,,"pp. 10.1-10.18",2009,Nov.
"A. Yamanaka,T. Takaki,Y. Tomita,M. Yoshino","Crystal Plasticity Phase-Field Simulation of Deformation Behavior and Microstructure Evolution in Polycrystalline Material","X International Conference on Computational Plasticity (COMPLAS X)","Proceedings of COMPLAS X (CD-ROM)",,,,"pp. 1-4 (462)",2009,Sept.
"吉野 雅彦,大澤 裕樹,岡部 亮,山中 晃徳","超微細塑性加工を利用した効率的な複合微細構造表面の作成","日本機械学会2009年度年次大会","日本機械学会2009年度年次大会講演論文集",,,,"pp. 191-192",2009,Sept.
"吉野雅彦,内田和見,吉川直樹","高静水圧環境における押し込み試験装置の開発","2009年度精密工学会秋季大会学術講演会","2009年度精密工学会秋季大会学術講演会講演論文集",,,,"pp. 11-12",2009,Sept.
"Masahiko Yoshino,Ryo Hibino,Nayuta Minami,Hidehiko Kimura,Takashi Matsumura,Noritsugu Umehara","Change of crystalline structure of single crystal metals by nano/micro plastic forming","ESAFORM2009","Proceedings of ESAFORM2009",,,,,2009,May
"山中晃徳,高木知弘,吉野雅彦","炭素鋼におけるフェライト変態の3次元Multi-Phase-Fieldシミュレーション","日本鉄鋼協会 第157回春季講演大会","材料とプロセス(CAMP-ISIJ)",,"Vol. 22","No. 1","pp. 575",2009,Mar.
"清水 洋平,吉野 雅彦","高静水圧切削のための旋盤型NC切削装置の開発","2009年度精密工学会春季大会卒論発表会","2009年度精密工学会春季大会卒論発表会",,,,,2009,Mar.
"中村 淳,吉野 雅彦","圧延を用いた高能率微細塑性加工法の開発","2009年度精密工学会春季大会卒論発表会","2009年度精密工学会春季大会卒論発表会",,,,,2009,Mar.
"大澤 裕樹,吉野 雅彦","超微細塑性加工を利用した複合微細構造表面の開発","2009年度精密工学会春季大会卒論発表会","2009年度精密工学会春季大会卒論発表会",,,,,2009,Mar.
"箱田 賢司,吉野 雅彦","高静水圧環境下における二次元切削実験装置の開発","2009年度精密工学会春季大会卒論発表会","2009年度精密工学会春季大会卒論発表会",,,,,2009,Mar.
"MASAHIKO YOSHINO,Noritsugu Umehara,Sivanadam Aravindan","Development of functional surface by nano-plastic forming",,"WEAR","Elsevior","Vol. 266","No. 5-6","pp. 581-584",2009,Mar.
"Masahiko Yoshino,Fumikazu Yoshizawa,Takashi Matsumura","Control of Optical Transmittance by Nano Plastic Forming",,"International Journal of Material Forming",,"Vol. 1","  1",,2009,Jan.
"Willy Kurnia,Masahiko Yoshino","Nano/micro structure fabrication of metal surfaces using the combination of nano plastic forming, coating and roller imprinting processes",,"J. Micromech. Microeng.",,"Vol. 19",,,2009,
"Hassan Rashidi,MASAHIKO YOSHINO","New Nano Fabrication Method by Combination of Nano Plastic Forming and Etching Technologies","第７回生産加工・工作機械部門講演会","第７回生産加工・工作機械部門講演会講演論文集","日本機械学会",,,"pp. 127-128",2008,Nov.