"J.Shinozuka,T.Obikawa","Development of Cutting Tools with Built-in Thin Film Thermocouples",,"Key Engineering Materials",,"Vol. 257-258",,"pp. 547-552",2004,
"Obikawa Tishiyuki,Shinozuka Jun,Sonoda Tetsuri,Sasajima Kazuyuki","Development of Cutting Simulator for End Milling",,"7th International Conference on Progress of Machining Technology",,,,"pp. 753-758",2004,
"篠塚淳,内海幸治,Basti Ali,帯川利之","薄膜温度センサ内蔵インテリジェント切削工具の開発",,"日本機械学会　第５回生産加工・工作機械部門講演会講演論文集",,"Vol. 04-3",,"pp. 251-252",2004,
"帯川利之,三田友紀,篠塚淳","Inconel718のエンドミル切削のFEMシミュレーション",,"日本機械学会　第５回生産加工・工作機械部門講演会講演論文集",,"Vol. 04-3",,"pp. 23-24",2004,
"帯川利之,國枝泰博,篠塚淳","マイクロボールエンドミルによるガラスの高能率切削",,"日本機械学会　第５回生産加工・工作機械部門講演会講演論文集",,"Vol. 04-3",,"pp. 21-22",2004,
"篠塚淳,帯川利之","塑性波伝播速度を超える超高速切削機構",,"2004年度精密工学会秋季大会が学術講演会講演論文集",,,,"pp. 355-356",2004,
"Toshiyuki Obikawa,Jun Shinozuka","Monitoring of flank wear of coated tool in high speed machining with a neural network ART2",,"International Journal of Machine Tools and Manufacture",,"Vol. 44","No. 12-13","pp. 1311-1318",2004,
"Y.Kamata,T.Obikawa,J.Shinozuka","Analysis of Mist Flow in MQL Cutting",,"Key Engineering Materials",,"Vol. 257-258",,"pp. 339-344",2004,
"帯川利之,篠塚淳,園田哲理","エンドミル加工における逃げ面ー工作物の干渉予測",,"2003年度精密工学会春季大会学術講演会講演論文集",,,,"pp. 525",2003,
"T.Obikawa,J.Shinozuka,H.Nakamoto","Monitoring of High Speed Machining States with an Nural Network ART2",,"International Conference on Leading Edge manufacturing in 21st Century, Nov.3-6",,,,"pp. 669-674",2003,
"帯川利之,李成発,篠塚淳","切削シミュレーションによるニッケル基超耐熱合金の被削性評価",,"精密工学会誌",,"Vol. 69","No. 1","pp. 105-109",2003,
"篠塚淳,帯川利之","超高速切削過程における衝撃波と切削機構",,"日本機械学会論文集（Ｃ編）",,"Vol. 69","No. 680","pp. 1123-1130",2003,
"帯川利之,篠塚淳,末吉靖弘","エンドミル切削の有限要素法解析",,"2003年度精密工学会春季大会学術講演会講演論文集",,,,"pp. 524",2003,
"釜田康裕,篠塚淳,帯川利之","工具逃げ面周りのミスト流の解析",,"2002年度精密工学会春季大会学術講演会講演論文集",,,,"pp. 296",2002,
"帯川利之,釜田康裕,篠塚淳","突切りにおけるセミドライ切削の効果",,"日本機械学会第４回生産加工・工作機械部門講演会講演論文集",,,,"pp. 165-166",2002,
"帯川利之,篠塚淳,末吉靖弘","エンドミル切削の有限要素シミュレーション",,"2002年度精密工学会秋季大会学術講演会講演論文集",,,,"pp. 348",2002,
"篠塚淳","二次元高速衝撃試験装置の開発及び塑性波伝播形態を考慮した超高速切削過程の材料物理学的検討",,"財団法人大澤科学技術振興財団　事業年報",,"Vol. 10",,"pp. 23-29",2002,
"帯川利之,篠塚淳","MQL加工における工具逃げ面周りのミスト流の解析",,"研究協力部会　ＲＣ183　次世代生産基盤技術に関する研究分科会　研究報告書　社団法人　日本機械学会",,,,"pp. 126-135",2002,
"Obikawa Toshiyuki,Li Chengfa,Shinozuka Jun","Finite Element Analysis of Machining Nickel-Base Superalloy",,"Progress of Machining Technology",,,,"pp. 772-777",2002,
"帯川利之,篠塚淳,石黒裕隆","温度センサ内蔵工具の開発",,"2002年度精密工学会春季大会学術講演会講演論文集",,,,"pp. 329",2002,
"李成発,篠塚淳,帯川利之","ニッケル基耐熱超合金の切削シミュレーション",,"2002年度精密工学会春季大会学術講演会講演論文集",,,,"pp. 298",2002,
"居相政史,帯川利之,篠塚淳","知的モニタリングのためのセンサー内蔵工具の開発",,"関東学生会第４０回学生員卒業研究発表講演会講演前刷集",,,,"pp. 301",2001,
"Jun Shinozuka,Masahiko Yoshino,Toshiyuki Obikawa","Machine Parts Manufacturing by Sheet Steel Lamination Technology",,"Initiatives of Precision Engineering at the Beginning of a Millennium",,,,"pp. 127-131",2001,
"帯川利之　篠塚淳　釜田康裕","ＭＱＬ加工における流れ場の解析",,"日本機械学会2001年度年次大会講演論文集(VI)",,"Vol. VI",,"pp. 19-20",2001,
"帯川利之　篠塚淳","エンドミル切削における冷却効果",,"日本機械学会2001年度年次大会講演論文集(VI)",,"Vol. VI",,"pp. 17-18",2001,
"篠塚淳,藤田靖隆,帯川利之","高速切削における材料物性の効果",,"2000年度精密工学会春季大会学術講演会講演論文集",,,,"pp. 186",2000,
"吉野雅彦,帯川利之,篠塚淳","薄鋼板積層造形法によるRapid Manufacturing System",,"日本機械学会論文集（Ｃ編）",,"Vol. 66","No. 642","pp. 313-318",2000,
"中本秀一,篠塚淳,帯川利之","ウェーブレット変換と自己組織化ニューラルネットワーク（ART2）を用いた工具摩耗監視システム",,"（社）精密工学回　第７回学生会員卒業研究発表講演論文集(CD-ROM:P07)",,,,"pp. P07",2000,
"T.Obikawa,J.Shinozuka,H.Kikuchi,K.Yoshino,T.Tanabe","FINITE ELEMENT MODELING OF MACHINIG WITH A HELICAL ENDMILL",,"PROGRESS OF MACHINIG TECHNOLOGY",,,,"pp. 715-719",2000,
"篠塚淳,吉野雅彦,帯川利之","薄鋼板を用いた積層造形法",,"日本塑性加工学会シミュレーション統合システム分科会 第２４回ＦＥＭセミナー三次元造形のためのラピッドプロトタイピング",,,,"pp. 31-39",1999,
"Jun Shinozuka,Toshiyuki Obikawa","Simulation Analysis of Hyper Velocity Machining",,"ABRASIVE TECHNOLOGY Current Development and Application I World Scientific",,,,"pp. 378-385",1999,
"吉野雅彦,帯川利之,篠塚淳","薄鋼板を用いた積層造形法（第８報）?積層造形製品の品質評価?",,"1999年度精密工学会秋季大会学術講演会講演論文集",,,,"pp. 11",1999,
"T.Obikawa,M.Yoshino,J.Shinozuka","Sheet steel lamination for rapid manufacturing",,"Journal of Materials Processing Technology",,"Vol. 80-90",,"pp. 171-176",1999,
"篠塚淳,帯川利之","東京工業大学工学部帯川研究室",,"精密工学会秋季大会行事　産学交流フォーラムin Sendai",,,,"pp. 130",1999,
"帯川利之,篠塚淳","加工シミュレーションへの関心と期待",,"1999年度精密工学会春季大会学術講演会講演論文集",,,,"pp. 211",1999,
"篠塚淳,吉野雅彦,帯川利之","薄鋼板を用いた積層造形法（第７法）?積層造形装置の自動化?",,"1999年度精密工学会春季大会学術講会学術演論文集",,,,"pp. 728",1999,
"篠塚淳,菊地洋史,帯川利之","インターネットを利用した切削状態の監視",,"日本機械学会1999年度年次大会講演論文集(V)",,"Vol. V",,"pp. 207-208",1999,
"篠塚淳,藤田靖隆,帯川利之","超高速切削シミュレーション",,"日本機械学会1999年度年次大会講演論文集(V)",,"Vol. V",,"pp. 17-18",1999,
"篠塚淳","複合すくい面工具の切削性能の解析的予測に関する研究",,,,,,,1998,Feb.
"帯川利之,古沢浩二,吉野雅彦,篠塚淳","薄鋼板を用いた積層造形法（第５報）?メッキ鋼板の高速溶着法の開発?",,"1998年度精密工学会春季大会学術講演会講演論文集",,,,"pp. 420",1998,
"吉野雅彦,塙裕樹,帯川利之,篠塚淳","薄鋼板を用いた積層造形法（第６報）?積層材の機械特性?",,"1998年度精密工学会春季大会学術講演会講演論文集",,,,"pp. 421",1998,
"篠塚淳,帯川利之,白樫高洋","バーチャルマシーニングを用いた工具設計",,"1998年度精密工学会春季大会学術演論会講演論文集",,,,"pp. 178",1998,
"J.Shinozuka,T.Obikawa,T.Shirakashi","A CAE System for High Performance Metal Cutting Tool Geometry",,"Proceedings of the International Conference on Precision Engineering, Taipei,Taiwan,R.O.C.",,"Vol. 2",,"pp. 941-946",1997,
"篠塚淳,帯川利之,白樫高洋","切削工具形状評価システム",,"1997年度精密工学会春季大会学術講演会講演論文集",,,,"pp. 685-686",1997,
"帯川利之,篠塚淳,古沢浩二,笹原弘之","薄鋼板を用いた積層造形法（第２報）?積層造形装置の試作?",,"1997年度精密工学会秋季大会学術講演会講演論文集",,,,"pp. 345",1997,
"近藤慶典,篠塚淳,帯川利之,白樫高洋","切削加工仕上げ面の硬度測定シミュレーション",,"1997年度精密工学会春季大会学術講演会講演論文集",,,,"pp. 435",1997,
"帯川利之,吉野雅彦,篠塚淳,笹原弘之","薄鋼板を用いたRapid Manufacturing法の開発",,"山梨講演会講演論文集",,,,"pp. 151-152",1997,
"篠塚淳,帯川利之,白樫高洋","チップブレーカによる切りくず破断過程の熱弾塑性有限要素法シミュレーション",,"精密工学会誌",,"Vol. 62","No. 8","pp. 1161-1166",1996,
"J.Shinozuka,T.Obikawa,T.Shirakashi","Chip Breaking Analysis from the Viewpoint of the Optimum Cutting Tool Geometry Design",,"Journal of Materials Processing Technology",,"Vol. 62",,"pp. 345-351",1996,
"帯川利之,篠塚淳,白樫高洋","溝型すくい面工具の切削特性の解析的予測",,"精密工学会誌",,"Vol. 61","No. 9","pp. 1295-1299",1995,
"篠塚淳,帯川利之,白樫高洋","任意形状すくい面工具の切削特性の解析的検討",,"1994年度精密工学会春季大会学術講演会講演論文集",,,,"pp. 151-152",1994,
"J.Shinozuka,T.Obikawa,T.Shirakashi","Cutting Performance of Tools with Curved Rake Face",,"Advancement of Intelligent Production",,,,"pp. 379-384",1994,
"帯川利之,篠塚淳,白樫高洋","最適刃形設計に関する研究（第２報）?多段すくい面工具の摩耗・欠損特性と評価法の一試案?",,"1993年度精密工学会春季大会学術講演会講演論文集",,,,"pp. 27-28",1993,
"T.Obikawa,J.Shinozuka,T.Shirakashi","FEM Analysis on Cutting Performance of Tools with Secondary Rake Face",,"International Conference on Machining Technology in Asia & Pacific Regions",,,,"pp. 21-26",1993,
"帯川,篠塚淳","最適波刃形設計に関する研究（第１報）?多段すくい面工具特性のシミュレーション的予測?",,"1992年度精密工学会秋季大会学術講演会講演論文集",,,,"pp. 149-150",1992,
"篠塚淳","最適切削工具刃型の設計に関する研究",,,,,,,1991,