"長谷川豪太,吉田和弘,金俊完","積層形ERマイクロバルブを用いたソフトマイクロアクチュエータの特性評価","第33回MAGDAコンファレンス in 東京","第33回MAGDAコンファレンス in 東京 講演論文集",,,,"pp. 151-152",2024,Nov.
"Kazuhiro Yoshihara,KAZUHIRO YOSHIDA,Joon-wan KIM","Development of a soft microfinger having rigidity anisotropy","2024 27th Int. Conf. on Mechatronics Technology (ICMT)","2024 27th Int. Conf. on Mechatronics Technology (ICMT)",,,,"  Paper No. 5",2024,Nov.
"江口淳,吉田和弘,金俊完","ジャミング転移現象による可変変位拘束機構の提案","日本機械学会山梨講演会2024","日本機械学会山梨講演会2024予稿集",,,,"pp. 31-32",2024,Oct.
"楠田悠賀,吉田和弘,金俊完","交流圧力源システムに用いる静電閉鎖チェック弁の特性改善","日本機械学会山梨講演会2024","日本機械学会山梨講演会2024予稿集",,,,"pp. 17-18",2024,Oct.
"石関康汰,吉田和弘,金俊完","交流圧力駆動ソフトマイクロフィンガに搭載する積層形ERマイクロバルブユニットの製作と評価","日本機械学会山梨講演会2024","日本機械学会山梨講演会2024予稿集",,,,"pp. 25-26",2024,Oct.
"川合光,吉田和弘,金俊完","交流圧力源システムに用いる静電吸着機構に関する研究","日本機械学会山梨講演会2024","日本機械学会山梨講演会2024予稿集",,,,"pp. 19-20",2024,Oct.
"定本斎,吉田和弘,金俊完","交流電気浸透を用いた2次元流体操作マイクロデバイスの提案","日本機械学会2024年度年次大会","日本機械学会2024年度年次大会予稿集",,,,"  J111-02",2024,Sept.
"山本健二,松原竜也,吉田和弘,金俊完","電界共役流体の発生圧力を用いた蠕動マイクロポンプの製作に関する研究","日本機械学会第23回機素潤滑設計部門講演会","日本機械学会第23回機素潤滑設計部門講演会予稿集",,,,"  2B2-2",2024,Apr.
"楠田悠賀,吉田和弘,金俊完","静電閉鎖チェック弁を用いた交流圧力源システムの提案","日本機械学会第23回機素潤滑設計部門講演会","日本機械学会第23回機素潤滑設計部門講演会予稿集",,,,"  2B1-6",2024,Apr.
"吉原一博,吉田和弘,金俊完","剛性異方性を有するソフトマイクロフィンガ","日本機械学会第23回機素潤滑設計部門講演会","日本機械学会第23回機素潤滑設計部門講演会予稿集",,,,"  1B3-3",2024,Apr.
"川合光,吉田和弘,金俊完","静電吸着機構を用いた交流圧力源システムの提案","日本機械学会第23回機素潤滑設計部門講演会","日本機械学会第23回機素潤滑設計部門講演会予稿集",,,,"  2B1-5",2024,Apr.
"石関康汰,吉田和弘,金俊完","交流圧力駆動ソフトマイクロフィンガに搭載する積層形ERマイクロバルブの提案と設計","日本機械学会第23回機素潤滑設計部門講演会","日本機械学会第23回機素潤滑設計部門講演会予稿集",,,,"  2B2-1",2024,Apr.
"大友泰輝,松原竜也,Deok-Ho Kim,池内真志,吉田和弘,金俊完","MEMS技術を用いて形成するPDMS多孔質膜を有するセルカルチャーインサートの製作","令和5年度生体医歯工学共同研究拠点 成果報告会","令和5年度生体医歯工学共同研究拠点成果報告会予稿集_非公開対応版",,,,"p. 176",2024,Mar.
"Takaaki Kubo,KAZUHIRO YOSHIDA,Joon-wan KIM","A High Power Micropump Using Micro Sheet Valves","2023 26th Int. Conf. on Mechatronics Technology (ICMT)","2023 26th Int. Conf. on Mechatronics Technology (ICMT) (IEEE Xplore)","IEEE",,,,2023,Dec.
"Joon-wan Kim","ECF(electro-conjugate fluid)-driven microsyringe pump for lab-on-a-chip devices","The 8th International Symposium on Biomedical Engineering International Workshop on Nanodevice Technologies 2023","The 8th International Symposium on Biomedical Engineering International Workshop on Nanodevice Technologies 2023",,,,"pp. 42-43",2023,Nov.
"Taiki Otomo,Tatsuya Matsubara,Deok-Ho Kim,Masashi Ikeuchi,Kazuhiro Yoshida,Joon-wan KIM","Proposal of a porous PDMS membrane using MEMS-fabricated nickel micropillars as a mold","The 8th International Symposium on Biomedical Engineering International Workshop on Nanodevice Technologies 2023","The 8th International Symposium on Biomedical Engineering International Workshop on Nanodevice Technologies 2023",,,,"pp. 52-53",2023,Nov.
"山本 健二,松原 竜也,吉田 和弘,金 俊完","電界共役流体（ECF）駆動形蠕動マイクロポンプの提案","山梨講演会2023","山梨講演会 2023 予稿集",,,"No. 230-3","pp. B13",2023,Nov.
"定本 斎,吉田 和弘,金 俊完","絶縁形交流電気浸透を用いたマイクロ流体デバイスの提案","山梨講演会2023","山梨講演会 2023 予稿集",,,"No. 230-3","pp. B12",2023,Nov.
"吉原 一博,吉田 和弘,金 俊完","柔軟性を能動制御できるソフトマイクロフィンガの提案","山梨講演会2023","山梨講演会 2023 予稿集",,,"No. 230-3","pp. B11",2023,Nov.
"矢野 智昭,坂間 清子,金 俊完,松本 洋一,尾形 秀樹","第8回 機素潤滑設計(技術ロードマップから見る2030年の社会)",,"日本機械学会誌",,"Volume 126","Issue 1257","pp. 36-40",2023,Aug.
"杉山 貴則,吉田 和弘,金 俊完","鋭角形状のコレクタと補助電極を用いたエレクトロスピニング法の提案","日本機械学会 2023年度 年次大会","2023年度年次大会 予稿集","一般社団法人 日本機械学会",,,"  J111-05 2p",2023,Aug.
"久保 隆顕,吉田 和弘,金 俊完","マイクロシートバルブを用いた高出力空気圧マイクロポンプに関する研究","日本機械学会 2023年度 年次大会","2023年度年次大会 予稿集","一般社団法人 日本機械学会",,,"  J111-01 2p",2023,Aug.
"Maho Watanabe,KAZUHIRO YOSHIDA,Joon-wan Kim,Sang In Eom,Shinichi Yokota","Three-dimensional AC electroosmotic micropump with high power density",,"Journal of Micromechanics and Microengineering",,"Vol. 33",,"  105008 (12pp)",2023,Aug.
"Joon-wan Kim,Yuya Kondo,Taiki Otomo,Akihiro Yasuda,Tatsuya Matsubara,Kazuhiro Yoshida","Study on Droplet Trapping Using an EHD Micropump","International Conference on Precision Engineering and Sustainable Manufacturing (PRESM2023)","International Conference on Precision Engineering and Sustainable Manufacturing (PRESM2023) Proceedings",,,,"p. W2-FH3",2023,July
"Taiki Otomo,Joon-wan Kim,Akihiro Yasuda,Siqi Peng,Kazuhiro Yoshida","Study on Oil-in-oil Droplet Generation based on Flow-focusing Geometry Using Ehd Micropumps","International Conference on Precision Engineering and Sustainable Manufacturing (PRESM2023)","International Conference on Precision Engineering and Sustainable Manufacturing (PRESM2023) Proceedings",,,,"p. PP5-052",2023,July
"片岡遼,吉田和弘,金俊完","MR環境下で使用できるECFアクチュエータに関する研究","2023年春季フルードパワーシステム講演会","2023年春季フルードパワーシステム講演会講演論文集",,,,"pp. 104-106",2023,May
"長谷川豪太,吉田和弘,金俊完","積層形ERマイクロバルブを搭載したソフトマイクロアクチュエータの開発","2023年春季フルードパワーシステム講演会","2023年春季フルードパワーシステム講演会講演論文集",,,,"pp. 107-109",2023,May
"吉原一博,吉田和弘,金俊完","柔軟動作と位置決め動作が可能な剛性異方性を有するソフトマイクロフィンガの提案","2023年春季フルードパワーシステム講演会","2023年春季フルードパワーシステム講演会講演論文集",,,,"pp. 25-27",2023,May
"Taiki Otomo,Tatsuya Matsubara,Kazuhiro Yoshida,Deok-Ho Kim,Masashi Ikeuchi,Joon-wan Kim","A microfluidic device integrated with a stretchable microporous membrane controlled by electro-conjugate fluid",,"Sensors and Actuators A: Physical",,"Volume 356","Issue 16","Page 114332",2023,Apr.
"江?陸,吉田和弘,金俊完","高圧力駆動ERマイクロアクチュエータに関する研究","日本機械学会第21回機素潤滑設計部門講演会","日本機械学会第21回機素潤滑設計部門講演会予稿集",,,,"  1A11",2022,Dec.
"Joon-wan KIM","A micropump using MEMS technology and its applications to soft robots","The 24th Takayanagi Kenjiro Memorial Symposium","Proceedings of The 24th Takayanagi Kenjiro Memorial Symposium",,,,"pp. 69-70",2022,Nov.
"ZHU Yichuan,吉田 和弘,金 俊完","カーボンナノチューブ技術を用いたECF マイクロポンプ用の針状電極作製に関する研究","2022年秋季フルードパワーシステム講演会","2022 年秋季フルードパワーシステム講演会論文集","一般社団法人 日本フルードパワーシステム学会",,,"pp. 144-146",2022,Oct.
"久保 隆顕,吉田和弘,金 俊完","マイクロシートバルブを用いた高出力空気圧マイクロポンプの提案","山梨講演会2022","山梨講演会2022講演論文集","一般社団法人 日本機械学会",,"No. 220-3","pp. A11",2022,Oct.
"矢島 洋平,吉田 和弘,金 俊完","ECFマイクロレートジャイロの高性能化に向けた基礎研究","山梨講演会2022","山梨講演会2022講演論文集","一般社団法人 日本機械学会",,"No. 220-3","pp. A23",2022,Oct.
"長谷川 豪太,吉田 和弘,金 俊完","積層形ERマイクロバルブを搭載したソフトマイクロアクチュエータの提案","山梨講演会2022","山梨講演会2022講演論文集","一般社団法人 日本機械学会",,"No. 220-3","pp. A21",2022,Oct.
"早川 佳範,吉田 和弘,金 俊完","粒子分散系ERFを用いた高機能交流圧力源システムに関する研究","日本機械学会 2022年度年次大会","日本機械学会 2022年度年次大会 予稿集",,,,"  J111-03 2p",2022,Sept.
"SUDHAWIYANGKUL,吉田和弘,嚴 祥仁,金 俊完","フレキシブルERマイクロバルブとその応用",,"機能性流体フルードパワーシステムに関する研究委員会 研究成果報告書",,,,"pp. 17-20",2022,Sept.
"吉田 和弘,浅井 健太,牧田 耀,嚴 祥仁,金 俊完","交流電気浸透とその応用",,"機能性流体フルードパワーシステムに関する研究委員会 研究成果報告書",,,,"pp. 98-101",2022,Sept.
"三好 智也,吉田 和弘,嚴 祥仁,金 俊完","交流圧力源を用いた複数ERマイクロアクチュエータシステム",,"機能性流体テクノロジーの次世代FPSへの展開に関する研究委員会 研究成果報告書","一般社団法人 日本フルードパワーシステム学会",,,"pp. 40-44",2022,May
"Huy Hoang Huynh,Dong Han,Kazuhiro Yoshida,Michael De Volder,Joon-wan Kim","Soft actuator with switchable stiffness using a micropump-activated jamming system",,"Sensors and Actuators A: Physical",,"Volume 338","Issue 1","  113449",2022,May
"韓 冬,吉田 和弘,金 俊完","UV-LIGAによる電界共役流体マイクロ液圧源の開発とその応用",,"機能性流体テクノロジーの次世代FPSへの展開に関する研究委員会 研究成果報告書","一般社団法人 日本フルードパワーシステム学会",,,"pp. 11-14",2022,May
"吉田 和弘,金 俊完,嚴 祥仁,横田 眞一","交流電気浸透を応用したマイクロポンプ",,"機能性流体との融合化によるフルードパワーシステムの新展開に関する研究委員会 研究成果報告書","一般社団法人 日本フルードパワーシステム学会",,,"pp. 83-86",2022,Apr.
"金 俊完,横田 眞一","MEMS技術を用いたECFジェット用の電極対",,"機能性流体との融合化によるフルードパワーシステムの新展開に関する研究委員会 研究成果報告書","一般社団法人 日本フルードパワーシステム学会",,,"pp. 105-108",2022,Apr.
"横田 眞一,金 俊完","ECFマイクロポンプの高圧化の可能性について",,"機能性流体との融合化によるフルードパワーシステムの新展開に関する研究委員会 研究成果報告書",,,,"pp. 101-104",2022,Apr.
"吉田 和弘,金 俊完,嚴 祥仁,横田 眞一","ERFを用いたマイクロアクチュエータシステム",,"機能性流体との融合化によるフルードパワーシステムの新展開に関する研究委員会 研究成果報告書","一般社団法人 日本フルードパワーシステム学会",,,"pp. 11-14",2022,Apr.
"近藤優也,松原竜也,吉田和弘,金俊完","EHDマイクロポンプの発生圧力を用いた液滴トラップデバイスの提案","2022年度精密工学会春季大会学術講演会","2022年度精密工学会春季大会学術講演会講演論文集",,,,"  I31",2022,Mar.
"上田敏弘,吉田和弘,金俊完","流体慣性を応用した空気圧マイクロポンプに関する研究","2022年度精密工学会春季大会学術講演会","2022年度精密工学会春季大会学術講演会講演論文集",,,,"  I30",2022,Mar.
"Tatsuya Matsubara,Jong Seob Choi,Deok-Ho Kim,Joon-wan KIM","A Microfabricated Pistonless Syringe Pump Driven by Electro‐Conjugate Fluid with Leakless On/Off Microvalves",,"Small",,"Vol. 18","No. 15","pp. 2106221",2022,Feb.
"片岡 遼,吉田 和弘,金 俊完","ECFジェット効果を用いたMR環境下で使用できるアクチュエータに関する基礎研究","山梨講演会2022","山梨講演会2022講演論文集","一般社団法人 日本機械学会",,"No. 220-3","pp. A22",2022,
"木田 航平,吉田 和弘,金 俊完","流体慣性マイクロポンプを応用した管内走行マイクロロボットの提案と設計","日本機械学会第20回機素潤滑設計部門講演会","日本機械学会第20回機素潤滑設計部門講演会予稿集",,,,"  2112",2021,Dec.
"Tatsuya Matsubara,Kento Kobayashi,Deok-Ho Kim,Joon-wan KIM","FIB (Focused Ion Beam)-etched  Micro/Nanopattern on a curve surface","The 6th International Symposium on Biomedical Engineering",,,,,,2021,Dec.
"奥村 庄太郎,吉田 和弘,金 俊完","エレクトロスピニング法を用いた配向角度を有するナノファイバの形成","日本機械学会第20回機素潤滑設計部門講演会","日本機械学会第20回機素潤滑設計部門講演会予稿集",,,,"  2104",2021,Dec.
"杉山貴則,吉田和弘,金俊完","エレクトロスピニング法によるナノファイバの整列に関する研究","日本機械学会山梨講演会2021","日本機械学会山梨講演会2021講演論文集",,,,"  A32",2021,Nov.
"近藤優也,松原竜也,吉田和弘,金俊完","EHDマイクロポンプの発生圧力を用いた液滴トラップデバイスの提案","日本機械学会山梨講演会2021","日本機械学会山梨講演会2021講演論文集",,,,"  A31",2021,Nov.
"Zhu Yichuan,吉田和弘,金俊完","ECFマイクロポンプにおけるリング形電極の新たな製作方法に関する研究","日本機械学会山梨講演会2021","日本機械学会山梨講演会2021講演論文集",,,,"  A13",2021,Nov.
"江?陸,吉田和弘,金俊完","高圧力制御用ERマイクロバルブの設計および試作","日本機械学会山梨講演会2021","日本機械学会山梨講演会2021講演論文集",,,,"  A12",2021,Nov.
"早川佳範,吉田和弘,金俊完","粒子分散系ERFを用いた高機能交流圧力源システムの提案","日本機械学会山梨講演会2021","日本機械学会山梨講演会2021講演論文集",,,,"  A11",2021,Nov.
"Yo MAKITA,Kazuhiro YOSHIDA,Sang In EOM,Joon-wan KIM","A Study on a Mathematical Model for AC Electroosmosis Micropump","11th JFPS Int. Symp. on Fluid Power, Hakodate 2020","Proc. of 11th JFPS Int. Symp. on Fluid Power, Hakodate 2020 (Web. Proc.)",,,,"  OS2-01",2021,Oct.
"Koji MICHISHITA,Kazuhiro YOSHIDA,Joon-wan KIM","Study on a Low Pressure and Flowrate Driving of Micro Leg Joints for Soft Robots","11th JFPS Int. Symp. on Fluid Power, Hakodate 2020","Proc. of 11th JFPS Int. Symp. on Fluid Power, Hakodate 2020 (Web. Proc.)",,,,"  OP2-06",2021,Oct.
"本同 和人,吉田 和弘,金 俊完","低電圧で駆動する静電駆動形高速空気圧MEMSバルブの開発","日本機械学会2021年度年次大会","日本機械学会2021年度年次大会予稿集",,,,"p. S117-04",2021,Aug.
"金 俊完","MEMS技術によるマイクロ液圧源の高パワー密度化とその応用","日本機械学会2021年度年次大会","日本機械学会2021年度年次大会予稿集",,,,"p. K112-01",2021,Aug.
"大友 泰輝,吉田 和弘,金 俊完","ECFマイクロポンプ駆動により肺胞の動的環境を再現するマイクロデバイスの提案","日本機械学会2021年度年次大会","日本機械学会2021年度年次大会予稿集",,,,"p. S117-03",2021,Aug.
"小林賢人,吉田和弘,金俊完","積層形ERマイクロバルブに関する研究","2021年春季フルードパワーシステム講演会","2021年春季フルードパワーシステム講演会講演論文集",,,,"pp. 27-29",2021,June
"Thapanun SUDHAWIYANGKUL,KAZUHIRO YOSHIDA,Sang In EOM,Joon-wan KIM","A multi-DOF soft microactuator integrated with flexible electro-rheological microvalves using an alternating pressure source",,"Smart Materials and Structures",,"Vol. 30",,"  085006 (14pp)",2021,June
"Daichi Sugauchi,KAZUHIRO YOSHIDA,Sang In EOM,Joon-wan KIM","A Study on a MEMS Electro-Rheological Valve for Higher Pressure","10th Int. Conf. on Fluid Power Transmission and Control (ICFP 2021)","10th Int. Conf. on Fluid Power Transmission and Control (ICFP 2021) Conf. Proc. (Web Proc.)",,,,"pp. 473-475",2021,Apr.
"道下滉司,吉田和弘,金 俊完","ソフトロボット用の繊維強化マイクロ脚関節の提案","2020年秋季フルードパワーシステム講演会","2020年秋季フルードパワーシステム講演会講演論文集",,,,"pp. 63-65",2020,Dec.
"本同 和人,吉田 和弘,金 俊完","低電圧で駆動する静電駆動形高速空気圧MEMS バルブの提案","山梨講演会","山梨講演会 講演論文集",,,"No. 200-3","  D31",2020,Nov.
"新井 真俊,松谷 晃宏,吉田 和弘,金 俊完","深掘り反応性イオンエッチング（DRIE）における開口パターンの高アスペクト比形状への影響","山梨講演会","山梨講演会 講演論文集",,,"No. 200-3","  D44",2020,Nov.
"大友 泰輝,吉田 和弘,金 俊完","マイクロ流体デバイスにおける接着剤のはみだしがないパッケージング手法の提案","山梨講演会","山梨講演会 講演論文集",,,"No. 200-3","  D45",2020,Nov.
"小林 賢人,吉田 和弘,金 俊完","ER バルブのマイクロ化に関する研究","山梨講演会","山梨講演会 講演論文集",,,"No. 200-3","  D34",2020,Nov.
"木田 航平,吉田 和弘,金 俊完","高パワー管内走行マイクロロボットとそのマイクロ液圧源","山梨講演会","山梨講演会 講演論文集",,,"No. 200-3","  D33",2020,Nov.
"上田 敏弘,吉田 和弘,金 俊完","流体慣性を応用した空気圧マイクロポンプの提案と設計","山梨講演会","山梨講演会 講演論文集",,,"No. 200-3","  D32",2020,Nov.
"Dong Han,Kazuhiro Yoshida,Joon-wan Kim","Effective and efficient removing method of micromolds in UV-LIGA using CO2 laser ablation followed by O2/CF4 plasma finishing for high-aspect-ratio metallic microstructures",,"The International Journal of Advanced Manufacturing Technology",,"Volume 110","Issue 11","pp. 3391?3405",2020,Sept.
"牧田耀,吉田和弘,嚴祥仁,金俊完","交流電気浸透マイクロポンプの高出力化に関する研究","日本機械学会2020年度年次大会","日本機械学会2020年度年次大会講演論文集",,,,"  J11101",2020,Sept.
"金 俊完","講習会開催報告 No.19-324 講習会「ソフトアクチュエータの基礎と最新応用事例」",,"日本機械学会機素潤滑設計部門ニュースレター",,,"No. 39","pp. 12-13",2020,Aug.
"Zebing Mao,Tomonobu Nagaoka,Shinichi Yokota,Joon-wan Kim","Soft fiber-reinforced bending finger with three chambers actuated by ECF (electro-conjugate fluid) pumps",,"Sensors and Actuators A: Physical",,"volume 310","Number 1","pp. 112034",2020,Aug.
"Tatsuya Matsubara,Kazuhiro Yoshida,Joon-wan Kim","Active microvalve driven by electro-conjugate fluid jet flow with a hydraulic power source on a chip",,"Journal of Micromechanics and Microengineering",,"Vol. 30",,"  105013 (11pp)",2020,July
"金 俊完","機械工学の最新動向- 13.3 アクチュエータ",,"機械工学年鑑2020",,,,,2020,July
"Dong Han,Yoshiho Yamada,Shinichi Yokota,Joon-wan Kim","Multilayer Fabrication of Micromolding and Electroforming with the Planarization of Grinding for High-Aspect-Ratio Microelectrodes in Electro-conjugate Fluid (ECF) Micropumps",,"International Journal of Precision Engineering and Manufacturing",,"Vol. 21","No. 5","pp. 927?936",2020,May
"Joon-Wan Kim,Kazuhiro Yoshida,Toru Ide,Shinichi Yokota","Fabrication, Experiment, and Simulation of a Flexible Microvalve-Integrated Microarm for Microgrippers Using Electrorheological Fluid",,"Journal of Robotics and Mechatronics",,"Vol. 32","No. 2","pp. 333-343",2020,Apr.
"Thapanun Sudhawiyangkul,Kazuhiro Yoshida,Sang In Eom,Joon-wan Kim","A novel bending microactuator with integrated flexible electrorheological microvalves using an alternating pressure source for multi-actuator systems",,"Microsystem Technologies",,"Vol. 26",,"pp. 1507-1519",2020,Apr.
"Jong Seob Choi,Alec S. T. Smith,Nisa P. Williams,Tatsuya Matsubara,Minji Choi,Joon-wan KIM,Hyung Jin Kim,Seungkeun Choi,Deok‐Ho Kim","Nanopatterned Nafion Microelectrode Arrays for In Vitro Cardiac Electrophysiology",,"Advanced Functional Materials",,"Volume 30","Issue 25","Page 1910660",2020,Apr.
"Zebing Mao,Kazuhiro Yoshida,Joon-wan Kim","Active sorting of droplets by using an ECF (Electro-conjugate Fluid) micropump",,"Sensors and Actuators A: Physical",,"Volume 303",,"pp. 111702",2020,Mar.
"Dong Han,Haibo Wang,Shinichi Yokota,Joon-Wan Kim","Configurations of triangular prism and slit electrode pairs to enhance the performance of electro-conjugate fluid micropumps",,"Journal of Micromechanics and Microengineering",,"Volume 30","Number 2","  025007",2020,Jan.
"Thapanun Sudhawiyangkul,Kazuhiro Yoshida,Sang In Eom,Joon-wan Kim","A study on a hybrid structure flexible electro-rheological microvalve for soft microactuators",,"Microsystem Technologies","Springer","Vol. 26",,"pp. 309-321",2020,Jan.
"Zebing Mao,Kazuhiro Yoshida,Joon-wan Kim","A droplet-generator-on-a-chip actuated by ECF (electro-conjugate fluid) micropumps",,"Microfluidics and Nanofluidics","Springer Berlin Heidelberg","Vol. 23","No. 12","pp. 130",2019,Nov.
"Joon-wan Kim,Yoshiho Yamada,Shinichi Yokota","Micro ECF (electro-conjugate fluid) hydraulic power sources based on the modular design of TPSEs (triangular prism and slit electrode pairs)",,"The International Journal of Advanced Manufacturing Technology",,"Volume 106",,"Page 627-639",2019,Nov.
"Thapanun Sudhawiyangkul,KAZUHIRO YOSHIDA,Sang In Eom,Joon-wan Kim","A novel bending microactuator with integrated flexible electrorheological microvalves using an alternating pressure source for multi-actuator systems",,"Microsysem Technologies","Springer","Vol. 26",,"pp. 1507?1519",2019,Nov.
"Nhat Dang NGUYEN,Kazuhiro Yoshida,Joon-wan KIM","MEMS fabrication of a gap-controllable stencil mask for electrospray deposition","The 4th International Symposium on Biomedical Engineering (ISBE2019)","The 4th International Symposium on Biomedical Engineering",,,,"pp. 284-285",2019,Nov.
"Joon-wan KIM,Zebing MAO,Kazuhiro YOSHIDA","Performance of ECF Micropumps-integrated O/O (oil-in-oil) Droplet Generators","The 16th International Conference on Flow Dynamics (ICFD2019)","The 16th International Conference on Flow Dynamics (ICFD2019)",,,,"pp. 386-387",2019,Nov.
"奥村 庄太郎,吉田 和弘,金 俊完","エレクトロスピニング法を用いた配向ナノファイバに関する研究","山梨講演会2019","山梨講演会 2019講演論文集 ＣＤ",,,"No. 190-3","pp. 81-82",2019,Oct.
"牧田 耀,吉田 和弘,嚴 祥仁,金 俊完","交流電気浸透のメカニズムに関する研究","山梨講演会2019","山梨講演会 2019講演論文集 ＣＤ",,,"No. 190-3","pp. 79-80",2019,Oct.
"塩田 陽平,吉田 和弘,金 俊完","ECFマイクロポンプのラボオンチップへのパッケージングに関する研究","2019年秋季フルードパワーシステム講演会","2019年秋季フルードパワーシステム講演会 講演論文集",,,,"pp. 84-96",2019,Oct.
"Zebing Mao,Kazuhiro Yoshida,Joon-wan Kim","Droplet Sorter Using a Cantilever Actuated by Electro-conjugate Fluid Micropumps","23rd International Conference on Mechatronics Technology ? ICMT 2019","ICMT 2019 Book of Abstracts",,,,"p. 27",2019,Oct.
"Zebing Mao,Kazuhiro Yoshida,Joon-wan Kim","On‐demand water‐in‐oil droplet generation using  ECF (electro‐conjugate fluid ) micropump","14th IEEE Nanotechnology Materials and Devices Conference - IEEE NMDC 2019","Nanotechnology Materials and Devices Conference  Tehcnical Program","IEEE",,,"p. 68",2019,Oct.
"菅内 大地,吉田 和弘,嚴 祥仁,金 俊完","高圧で駆動するERマイクロシステムに関する研究","山梨講演会2019","山梨講演会 2019講演論文集 ＣＤ",,,"No. 190-3","pp. 77-78",2019,Oct.
"阿部 喜宗,吉田 和弘,嚴 祥仁,金 俊完","多自由度アクチュエータシステムのための共振形マイクロ交流圧力源に関する研究","山梨講演会2019","山梨講演会 2019講演論文集 ＣＤ",,,"No. 190-3","pp. 75-76",2019,Oct.
"金俊完,濱野真衣,吉田和弘","電界共役流体(ECF)を液圧源とするマイクロジャミンググリッパに関する研究","日本機械学会2019年度年次大会","日本機械学会2019年度年次大会講演論文集","一般社団法人 日本機械学会",,"No. 19-1","  J11113",2019,Sept.
"嚴祥仁,本同和人,吉田和弘,金俊完","誘電エラストマーアクチュエータの高出力化に関する研究(UV硬化性PDMSへのシリコンオイル添加の効果)","日本機械学会2019年度年次大会","日本機械学会2019年度年次大会講演論文集","一般社団法人 日本機械学会",,"No. 19-1","  J11112",2019,Sept.
"Huy Hoang Huynh,Kazuhiro Yoshida,Joon-Wan Kim","Proposal of a MEMS-based Cooling System Using an ECF Micropump","International Symposium on PRecision Engineering and Sustainable Manufacturing  (PRESM2019)","International Symposium on PRecision Engineering and Sustainable Manufacturing  (PRESM2019) Program&Proceedings",,,,"p. OP103",2019,July
"Tatsuya Matsubara,Huy Hoang Huynh,Kazuhiro Yoshida,Joon-wan Kim","Development of MEMS-fabricated Bidirectional ECF (Electro-Conjugate Fluid) micropumps",,"Sensors and Actuators A: Physical",,"Vol. 295","No. 15","pp. 317-323",2019,June
"Zebing Mao,Kazuhiro Yoshida,Joon-wan Kim","Developing O/O (oil-in-oil) droplet generators on a chip by using ECF (electro-conjugate fluid) micropumps",,"Sensors and Actuators B: Chemical",,"Vol. 296","No. 1","pp. 126669",2019,June
"Joon-wan Kim,Yusuke Tanabe,Shinichi Yokota","Comprehending Electro-conjugate Fluid (ECF) Jets by Using the Onsager Effect",,"Sensors and Actuators A: Physical",,"Vol. 295","No. 15","pp. 266-273",2019,June
"相 翔太,吉田 和弘,金 俊完","ECFマイクロポンプの高出力化を可能にする新たな電極対の提案","2019年春季フルードパワーシステム講演会","2019年春季フルードパワーシステム講演会 講演論文集",,,,"pp. 86-88",2019,May
"金 俊完,鳴海 将,吉田 和弘","ECF液圧源で駆動する昆虫形ソフトロボットに関する研究","第31回 「電磁力関連のダイナミクス」シンポジウム（SEAD31)","〔No.19-6〕日本機械学会 第 31 回「電磁力関連のダイナミクス」シンポジウム講演論文集",,,,"  23B1-1",2019,May
"Thapanun SUDHAWIYANGKUL,Kazuhiro YOSHIDA,Sang In EOM,Joon-wan KIM","Proposal of a two-DOFs soft microactuator integrated with flexible ER microvalves","第31回 「電磁力関連のダイナミクス」シンポジウム（SEAD31)","〔No.19-6〕日本機械学会 第 31 回「電磁力関連のダイナミクス」シンポジウム講演論文集",,,,"  22B1-1",2019,May
"Yuki Tamanoi,Ryota Horai,Kazuhiro Yoshida,Sang In Eom,Joon-wan Kim","A Study on an In-Pipe Mobile Micromachine Having a Fluid Inertia Micropump","8th Int. Conf. on Manufacturing, Machine Design and Tribology (ICMDT2019)","Proc. of 8th Int. Conf. on Manufacturing, Machine Design and Tribology (ICMDT2019)",,,,"  TH-D-1-3",2019,Apr.
"Nhat Dang Khoa NGUYEN,Kazuhiro YOSHIDA,Joon-wan KIM","Controlling electrospray-deposited pattern by changing electrical field on a stencil mask","8th Int. Conf. on Manufacturing, Machine Design and Tribology (ICMDT2019)","Proc. of 8th Int. Conf. on Manufacturing, Machine Design and Tribology (ICMDT2019)",,,,"  TH-D-1-4",2019,Apr.
"Zebing Mao,Kazuhiro Yoshida,Joon-wan Kim","Releasing large-area SU-8 structures without using any sacrificial layers",,"Microelectronic Engineering",,"Volume 212",,"pp. 53-60",2019,Apr.
"金 俊完","マイクロロボットに有効な機能性流体",,"フルードパワーシステム",,"Vol. 50","No. 2","pp. 82-85",2019,Mar.
"Zebing Mao,Kazuhiro Yoshida,Joon-wan Kim","Alleviation of the adhesive protrusion problem at the bonding interface of free-standing microstructures",,"Journal of Mechanical Science and Technology",,"Volume 33","  2","pp. 749?757",2019,Feb.
"Zebing Mao,Kazuhiro Yoshida,Joon-wan Kim","Fast packaging by a partially-crosslinked SU-8 adhesive tape for microfluidic sensors and actuators",,"Sensors and Actuators A: Physical",,"Volume 289","  15","Page 77-86",2019,Feb.
"Zebing Mao,Kazuhiro Yoshida,Joon-wan Kim","A micro vertically-allocated SU-8 check valve and its characteristics",,"Microsystem Technologies","Springer Nature","Volume 25","No. 1","pp. 245-255",2019,Jan.
"K. Yoshida,K. Asai,S.I. Eom,J.-W. Kim","A Novel AC Electroosmotic Micropump Using T-Shaped Electrode Array","Fifteenth International Conference on Flow Dynamics  (ICFD2018)","Proceedings of Fifteenth International Conference on Flow Dynamics  (ICFD2018)",,,,"pp. 546-547",2018,Nov.
"Tomonobu Nagaoka,Zebing Mao,Kenjiro Takemura,Shinichi Yokota,Joon-wan Kim","ECF (electro-conjugate fluid) finger with bidirectional motion and its application to a flexible hand",,"Smart Materials and Structures",,"Volume 28","Number 2","Page 025032",2018,Nov.
"Dong Han,Kazuhiro Yoshida,Joon-wan Kim","Proposal on an effective removing method of micromolds in UVLIGA by combining CO2 laser engraving with O2/CF4 plasma etching","22nd International Conference on Mechatronics Technology (ICMT2018)","ICMT2018 Conference Program (USB)",,"  Session 15","  Paper ID 60","pp. 1-2",2018,Oct.
"鳴海 将,吉田 和弘,金 俊完","ECFマイクロポンプを搭載した昆虫形ソフトロボットの提案","山梨講演会2018","山梨講演会2018講演論文集（ＣＤ-ＲＯＭ）",,,"No. No.180-3","pp. 159-160",2018,Oct.
"吉田和弘,金俊完","東京工業大学 横田・吉田・金研究室のフルードパワー研究",,"油空圧技術2018年10月増刊号",,,,,2018,Oct.
"Masashi Ogawa,Kazuhiro Yoshida,Joon-wan Kim","Development of Au-ITO composite wiring for the back UV-LIGA","22nd International Conference on Mechatronics Technology (ICMT2018)","ICMT2018 Conference Program (USB)",,"  Session 15","  Paper ID 62","pp. 1-2",2018,Oct.
"Zebing Mao,Kazuhiro Yoshida,Joon-wan Kim","Proposal on manipulating droplets by a cantilever check valve operated by an ECF micropump","22nd International Conference on Mechatronics Technology (ICMT2018)","ICMT2018 Conference Program (USB)",,"  Session 15","  Paper ID 58","  1-2",2018,Oct.
"Thapanun Sudhawiyangkul,Kazuhiro Yoshida,Sang In Eom,Joon-wan Kim","Development of a UV-curable PEDOT:PSS based flexible electrorheological microvalve (FERV)","22nd International Conference on Mechatronics Technology (ICMT2018)","ICMT2018 Conference Program (USB)",,"  Session6","  Paper ID 7","  1-2",2018,Oct.
"塩田 陽平,嚴 祥仁,吉田 和弘,金 俊完","裏面露光を用いたUV硬化性PDMSによる生体模倣膜の形成に関する研究","山梨講演会2018","山梨講演会2018講演論文集（ＣＤ-ＲＯＭ）",,,"No. 180-3","pp. 163-164",2018,Oct.
"玉野井 佑昂,吉田 和弘,嚴 祥仁,金 俊完","流体慣性を応用した圧電マイクロポンプの高出力化（ポンプ室高剛性化の実験的検討）","山梨講演会2018","山梨講演会2018講演論文集（ＣＤ-ＲＯＭ）",,,"No. 180-3","pp. 71-72",2018,Oct.
"Joon-wan Kim,Yusuke Tanabe,Shinichi Yokota","Modeling Electro-conjugate Fluid (ECF) Jet by Using Onsager Effect","International Workshop on Piezoelectric Materials and Applications in Actuators (IWPMA2018)","International Workshop on Piezoelectric Materials and Applications in Actuators (IWPMA2018)",,,,"p. 82",2018,Sept.
"小川 真史,吉田 和弘,金 俊完","Au-ITO 複合配線を用いたUV 裏面露光による新たなUV-LIGA プロセスの提案","日本機械学会 2018年度年次大会","日本機械学会 2018年度年次大会DVD論文集","一般社団法人 日本機械学会",,"No. 18-1","  J1120201",2018,Sept.
"嚴 祥仁,宮田 航成,吉田和弘,金 俊完","誘電エラストマーアクチュエータの高出力化に関する研究(UV 硬化性PDMS へのチタン酸バリウム添加の効果)","日本機械学会 2018年度年次大会","日本機械学会 2018年度年次大会DVD論文集","一般社団法人 日本機械学会",,"No. 18-1","  J1120202",2018,Sept.
"Zebing Mao,Kazuhiro Yoshida,Joon-wan Kim","Fast bonding technology by using partially-crosslinked SU-8 for MEMS-fabricated actuators and sensors","International Workshop on Piezoelectric Materials and Applications in Actuators (IWPMA2018)","International Workshop on Piezoelectric Materials and Applications in Actuators (IWPMA2018)",,,,"p. 54",2018,Sept.
"三好智也,吉田和弘,嚴祥仁,金俊完","交流圧力源を用いた複数ERマイクロアクチュエータシステム",,"JFPS機能性流体テクノロジーの次世代FPSへの展開に関する研究委員会 研究成果報告書",,,,,2018,Sept.
"韓冬,吉田和弘,金俊完","UV-LIGAによる電界共役流体マイクロ液圧源の開発とその応用",,"JFPS機能性流体テクノロジーの次世代FPSへの展開に関する研究委員会 研究成果報告書",,,,,2018,Sept.
"Tatsuya Matsubara,Kazuhiro Yoshida,Joon-wan Kim","Development of MEMS-fabricated Bidirectional ECF micropump","International Workshop on Piezoelectric Materials and Applications in Actuators (IWPMA2018)","International Workshop on Piezoelectric Materials and Applications in Actuators (IWPMA2018)",,,,"p. 81",2018,Sept.
"金 俊完","平成29年度の機能性流体分野の研究活動の動向",,"フルードパワーシステム",,"Vol. 49","No. E1","pp. E14-E17",2018,Aug.
"Dong Han,Kazuhiro Yoshida,Joon-Wan Kim","A Novel Hybrid Removal Technology for High-Aspect-Ratio SU-8 Micromolds in ECF (Electro-Conjugate Fluid) Micropumps Fabrication by UV-LIGA",,"Journal of Microelectromechanical Systems",,"Vol. 27","No. 5","pp. 818-826",2018,Aug.
"Huy Hoang Huynh,Kazuhiro YOSHIDA,Joon-wan","Formation of Micropillars for Higher Performance of ECF Planar Micropumps","International Symposium on Precision Engineering and Sustainable Manufacturing (PRESM2018)","International Symposium on Precision Engineering and Sustainable Manufacturing (PRESM2018) Program&Proceedings",,,,"p. OP064",2018,July
"Zebing Mao,Kazuhiro Yoshida,Joon-wan KIM","Research on the Protrusion Problem in the Bonding Process of Free-standing SU-8 Microstructure","International Symposium on Precision Engineering and Sustainable Manufacturing(PRESM2018)","International Symposium on Precision Engineering and Sustainable Manufacturing (PRESM2018) Program&Proceedings",,,,"p. OP010",2018,July
"浅井健太,吉田和弘,嚴祥仁,金俊完","T 形電極アレイを用いた交流電気浸透マイクロポンプの提案","平成30年春季フルードパワーシステム講演会","平成30年春季フルードパワーシステム講演会 講演論文集","一般社団法人 日本フルードパワーシステム学会",,,"pp. 50-52",2018,May
"金俊完,嵯峨由彬,Zebing MAO,吉田和弘","ECF マイクロポンプを用いたジャミンググリッパの提案","平成30年春季フルードパワーシステム講演会","平成30年春季フルードパワーシステム講演会 講演論文集","一般社団法人 日本フルードパワーシステム学会",,,"pp. 41-43",2018,May
"Sudhawiyangkul Thapanun,Kazuhiro Yoshida,Sang in eom,Joon-wan kim","A Fabrication Process of Flexible Electro-Rheological Microvalve (FERV) Using UV-Curable PEDOT:PSS Electrodes","The 18th. Machine Design and Tribology Division Meetin in JSME","第18回機素潤滑設計部門講演会講演論文集","一般社団法人 日本機械学会",,"No. 18-6","pp. 181-182",2018,Apr.
"Mao Zebing,吉田 和弘,金 俊完","犠牲層を用いないSU-8構造体の剥離方法の提案","第18回機素潤滑設計部門講演会","第18回機素潤滑設計部門講演会講演論文集","一般社団法人 日本機械学会",,"No. 18-6","pp. 183-184",2018,Apr.
"金 俊完,佐藤 慧一,吉田 和弘,青木  弘良,山形 豊","静電レンズを用いたエレクトロスプレーデポジション(ESD)法によるマイクロパターニング","日本機械学会 2018年度年次大会","日本機械学会 2018年度年次大会DVD論文集","一般社団法人 日本機械学会",,"No. 18-1","  J1120203",2018,
"金 俊完","IFPEX2017?カレッジコーナーに見る最新技術?? 東京工業大学 金研究室 高出力パワー密度を有する マイクロ液圧源とその応用",,"油空圧技術",,"Vol. 56","No. 12","pp. 31-35",2017,Nov.
"Benjamin Gorrison,Dominiek Reynaerts,Satoshi Konishi,Kazuhiro Yoshida,Joon-wan Kim,Michael De Volder","Elastic Inflatable Actuators for Soft Robotic Applications",,"Advanced Materials",,"Volume 29","  43","  1604977",2017,Nov.
"佐藤慧一,吉田和弘,金俊完","磁性体ステンシルマスクの開発","山梨講演会2017","山梨講演会2017 講演論文集（ＣＤ-ＲＯＭ）",,,"No. 170-3","pp. 37-38",2017,Oct.
"K. Asai,K. Yoshida,S. I. Eom,J.-W. Kim","Novel AC Electroosmotic Micropump Using Slit Electrode and Multiple Square Pole Electrodes","21st International Conference on Mechatronics Technology(ICMT2017)","The 21st International Conference on Mechatronics Technology",,,,"pp. 111-114",2017,Oct.
"浅井健太,吉田和弘,嚴祥仁,金俊完","スリット電極と複数の四角柱電極を用いた交流電気浸透マイクロポンプの特性評価","山梨講演会2017","山梨講演会2017 講演論文集（ＣＤ-ＲＯＭ）",,,"No. 170-3","pp. 31-32",2017,Oct.
"嚴祥仁,宮田航成,吉田和弘,金俊完","UV硬化性PEDOT:PSSへの糖アルコール添加による誘電エラストマーアクチュエータの特性改善","山梨講演会2017","山梨講演会2017 講演論文集（ＣＤ-ＲＯＭ）",,,"No. 170-3","pp. 33-34",2017,Oct.
"Zebing Mao,Kazuhiro Yoshida,Joon-wan Kim","Study on the fabrication of a SU-8 cantilever vertically-allocated in a closed fluidic microchannel",,"Microsystem Technologies",,"Volume 24","No. 5","pp. 2473?2483",2017,Oct.
"Dong Han,Yong Xia,Shinichi Yokota,Joon-wan Kim","UV-LIGA technique by back UV exposure with self-alignment for ECF (electro-conjugate fluid) micropumps",,"Journal of Micromechanics and Microengineering",,"Volume 27","Number 12","Page 125008",2017,Oct.
"Tomoya Miyoshi,KAZUHIRO YOSHIDA,Joon-wan KIM,Sang In EOM","Development of a MEMS-Based Two-DOF ER Bending Actuator System Using an Alternating Pressure Source","The 10th JFPS International Symposium on Fluid Power, Fukuoka 2017","Proceedings of the 10th JFPS Internatinal Syposium on Flud Power, Fukuoka 2017",,,,"  1B16",2017,Oct.
"MAO ZEBING,吉田和弘,金俊完","SU-8自立型微細構造体の製作と接合","山梨講演会2017","山梨講演会2017 講演論文集（ＣＤ-ＲＯＭ）",,,"No. 170-3","pp. 35-36",2017,Oct.
"金 俊完,吉田 和弘","機能性流体ＥＣＦを用いたマイクロ液圧源とその応用","第25回フルードパワー国際見本市","第25回フルードパワー国際見本市 カレッジ研究発表展示コーナー論文集",,,,"pp. 59-60",2017,Sept.
"吉田 和弘,嚴 祥仁,金俊完","機能性流体ＥＲＦを応用したマイクロアクチュエータシステム","掲載誌名：第25回フルードパワー国際見本市","：第25回フルードパワー国際見本市 カレッジ研究発表展示コーナー論文集",,,,"pp. 57-58",2017,Sept.
"ZEBING MAO,Joon-wan KIM,KAZUHIRO YOSHIDA","Study on Geometrical Parameters of Micro Check Valves made of SU-8","日本機械学会 2017年度年次大会","日本機械学会2017年度年次大会講演論文集（ＤＶＤ論文集）","一般社団法人 日本機械学会",,"No. 17-1","  J1110202",2017,Sept.
"吉田和弘,浅井健太,嚴祥仁,金俊完","スリット電極と複数の四角柱電極を用いた交流電気浸透マイクロポンプの提案","日本機械学会 2017年度年次大会","日本機械学会2017年度年次大会講演論文集（ＤＶＤ論文集）","一般社団法人 日本機械学会",,"No. 17-1","  J1110201",2017,Sept.
"嚴祥仁,宮田航成,吉田和弘,金俊完","誘電エラストマーアクチュエータの高出力化に関する研究（UV硬化性PEDOT:PSSへの糖アルコール添加の効果）","日本機械学会 2017年度年次大会","日本機械学会2017年度年次大会講演論文集（ＤＶＤ論文集）","一般社団法人 日本機械学会",,"No. 17-1","  J1110105",2017,Sept.
"Seongsu Eom,Sang Min Park,Seon Jin Han,Joon Wan Kim,Dong Sung Kim","One-step fabrication of a tunable nanofibrous well insert via electrolyte-assisted electrospinning",,"RSC Advances",,"Vol. 7",,"pp. 38300-38306",2017,Aug.
"KAZUHIRO YOSHIDA,tomoyuki satou,Sang In EOM,Joon-wan KIM,SHINICHI YOKOTA","A study on an AC electroosmotic micropump using a square pole - slit electrode array",,"Sensors and Actuators A: Physical",,"Vol. 265",,"pp. 152-160",2017,Aug.
"小川真史,金 俊完,吉田和弘","パリレンを用いた可変焦点形ECFレンズの提案","平成29年春季フルードパワーシステム講演会","平成29年春季フルードパワーシステム講演会講演論文集",,,,"pp. 22-24",2017,May
"Dong Han,Hongri Gu,Joon-wan Kim,Shinichi Yokota","A bio-inspired 3D-printed hybrid finger with integrated ECF (electro-conjugate fluid) micropumps",,"Sensors and Actuators A: Physical",,"Vol. 257","No. 15","pp. 47-57",2017,Apr.
"Sang In Eom,Kosei Miyata,Kenta Asai,Joon-wan Kim,Kazuhiro Yoshida","Proposal of a peristaltic micropump using dielectric elastomer actuators fabricated by MEMS technology","Electroactive Polymer Actuators and Devices (EAPAD) 2017","Proc. SPIE  10163",,,,"  101631L",2017,Apr.
"佐藤慧一,金俊完,吉田和弘,山形豊","静電レンズ機構を有するステンシルマスクの提案","2017年度精密工学会春季大会","2017年度精密工学会春季大会講演論文集",,,,"pp. 163-164",2017,Mar.
"金 俊完","平成28年春季フルードパワーシステム講演会報告",,"フルードパワーシステム",,"Vol. 47","No. 6","pp. 317-318",2016,Nov.
"Tomoya MIYOSHI,Kazuhiro Yoshida,Joon wan Kim,Sang In EOM","A MEMS-based two-DOF PDMS bending actuator for multiple ER microactuator systems","20th International Conference  on Mechatronics  Technology（ICMT2016）","20th International Conference  on Mechatronics  Technology（ICMT2016）",,,,"p. 86-87",2016,Oct.
"清水美咲,西岡國生,松谷晃宏,吉田和弘,金俊完","DRIEによる高アスペクト比三角柱?スリット形電極対(TPSE)の製作に関する研究","山梨講演会2016","山梨講演会講演論文集",,,"No. 160-3","p. 161-162",2016,Oct.
"嚴祥仁,浅井 健太,宮田 航成,金俊完,吉田和弘","フォトリソグラフィで製作するDEアクチュエータ駆動蠕動マイクロポンプの提案","平成28年秋季フルードパワーシステム講演会","平成28年秋季フルードパワーシステム講演会講演論文集","一般社団法人日本フルードパワーシステム学会",,,"p. 32-34",2016,Oct.
"Dong HAN,Shinichi Yokota,Kazuya Edamura,Joon-wan KIM","Dynamic Characteristics of Hybrid 3D-printed Mini Finger Embedding ECF (Electro-conjugate Fluid) Micropump","20th International Conference  on Mechatronics  Technology（ICMT2016）","20th International Conference  on Mechatronics  Technology（ICMT2016）",,,,"p. 89-90",2016,Oct.
"Misaki Shimizu,Kunio Nishioka,Akihiro Matsutani,Kazuhiro Yoshida,Joon-wan Kim","Study on Fabrication of High Aspect Ratio TPSE by using DRIE","20th International Conference  on Mechatronics  Technology（ICMT2016）","20th International Conference  on Mechatronics  Technology（ICMT2016）",,,,"p. 32-33",2016,Oct.
"MAO ZEBING,吉田 和弘,金 俊完","マイクロチェックバルブを集積したECFマイクロ液圧源の提案","平成28年秋季フルードパワーシステム講演会","平成28年秋季フルードパワーシステム講演会講演論文集","一般社団法人日本フルードパワーシステム学会",,,"p. 97-99",2016,Oct.
"金 俊完","第16回JSME機素潤滑設計部門講演会におけるフルードパワー技術研究",,"フルードパワーシステム",,"Vol. 47","No. 5","pp. 234-236",2016,Sept.
"三好智也,吉田和弘,金 俊完,嚴 祥仁","MEMS 技術を応用したマイクロ交流圧力源搭載形2 自由度ER アクチュエータシステムに関する研究","2016年度年次大会","2016年度年次大会DVD","一般社団法人 日本機械学会",,"No. 16-1","  J1110106",2016,Sept.
"Joon-Wan Kim,Thanh V.X.Nguyen,Kazuya Edamura,Shinichi Yokota","Triangular Prism and Slit Electrode Pair for ECF Jetting Fabricated by Thick Micromold and Electroforming as Micro Hydraulic Pressure Source for Soft Microrobots",,"International Journal of Automation Technology","富士技術出版株式会社ＩＪＡＴ編集部","Vol. 10","No. 4","p. 470-478",2016,July
"嵯峨由彬,金俊完,横田眞一,枝村一弥","ECFマイクロ液圧源を内蔵した偏心チューブ形マイクロハンドに関する研究","ロボティクス・メカトロニクス講演会2016 in Yokohama","ロボティクス・メカトロニクス講演会2016 講演概要集",,,"No. 16-2","pp. 195",2016,June
"HAN DONG,金 俊完,横田 眞一,枝村 一弥","ハイブリッド3DプリンタによるミニサイズECFフィンガの動特性に関する研究","平成28年春季フルードパワーシステム講演会","平成28年春季フルードパワーシステム講演会 講演論文集","一般社団法人 日本フルードパワーシステム学会",,,"pp. 30-32",2016,May
"Joon-wan Kim,Kazuyoshi  Kondo,Shinichi  Yokota,Kazuya Edamura","MEMS-Fabricated Needle & Ring Electrode Pair (NRE) and its Application to the Braille Cell","The 4th Japan-China Joint Workshop on Fluid Power","Proceedins of The 4th Japan-China Joint Workshop on Fluid Power","The Japan Fluid Power System Society(JFPS)",,,"pp. 71-73",2016,May
"三好 智也,吉田 和弘,金 俊完,嚴 祥仁","MEMS技術を応用した交流圧力システムのための2自由度ソフトアクチュエータ","第16回機素潤滑設計部門講演会","第16回機素潤滑設計部門講演会 講演論文集","一般社団法人日本機械学会",,,"pp. 63-64",2016,Apr.
"金 俊完,中川 卓也,横田 眞一,枝村 一弥","ECF可変焦点形液体レンズの高速応答に関する研究","第16回 日本機械学会 機素潤滑設計部門講演会","第16回 日本機械学会 機素潤滑設計部門講演会 講演論文集","一般社団法人日本機械学会",,,"pp. 67-68",2016,Apr.
"Tomoya Miyoshi,KAZUHIRO YOSHIDA,Joon-wan KIM,Sang In EOM,SHINICHI YOKOTA","An MEMS-based multiple electro-rheological bending actuator system with an alternating pressure source",,"Sensors and Actuators A",,"Vol. 245",,"pp. 68-75",2016,Apr.
"松原 竜也,金 俊完,横田 眞一,枝村 一弥","ECFジェット駆動水溶液ポンピングシステムにおける流路への水の残留に関する研究","第16回機素潤滑設計部門講演会","第16回機素潤滑設計部門講演会 講演論文集",,,,"pp. 65-66",2016,Apr.
"坂間 清子,矢野 智昭,金俊完","13. 機素潤滑設計(<小特集>技術ロードマップから見る2030年の社会)",,"日本機械学会誌","一般社団法人 日本機械学会","Vol. 119","No. 1170","pp. 312-313",2016,
"Dong HAN,J.W. KIM,S.YOKOTA,E.EDAMURA","ECF MICROPUMP FABRICATED BY ELECTROFORMING WITH NOVEL SELF-ALIGNED MICRO-MOLDING TECHNOLOGY","The 15th International Conference on Micro and Nanotechnology for Power Generationand Energy Conversion Applications (PowerMEMS 2015)","Journal of Physics: Conference Series","IOP Publishing","Vol. 660","No. 1","pp. 012029",2015,Dec.
"韓冬,金俊完,横田眞一,枝村一弥","自己整合によるマイクロ鋳型を用いたECFマイクロポンプの提案","平成27年秋季フルードパワーシステム講演会","平成２７年秋季フルードパワーシステム講演会 講演論文集","日本フルードパワーシステム学会",,,"pp. 14-16",2015,Nov.
"Kazuhiro Yoshida,Maho Watanabe,Joon wan Kim,Sang in Eom,Shinichi Yokota","Characterization of an AC Electroosmotic Micropump Using Plate-Cylinder Electrode Array","The 19th International Conference on Mechatronics Technology(ICMT2015)","Proceedings of the 19th International Conference on Mechatronics Technology（ICMT2015)",,,,"  C10",2015,Nov.
"Joon-wan KIM,Seiya FURUKI,Shinichi YOKOTA,Kazuya EDAMURA","Study on increasing output power density in ECF micropumps","The KSFC 2015 Autumn Conference on Drive and Control International Session","Proceedings of The KSFC 2015 Autumn Conference on Drive and Control International Session",,,,"pp. 131-134",2015,Oct.
"松原竜也,金 俊完,横田眞一,枝村一弥","ディフューザ形状の非対称流路とECFマイクロポンプを統合した水溶液ポンピングシステムの開発","山梨講演会2015","山梨講演会講演論文集",,,"No. 150-3","pp. 84-85",2015,Oct.
"中川卓也,金 俊完,横田眞一,枝村一弥","可変焦点形液体レンズを駆動するECFマイクロポンプの検討","山梨講演会2015","山梨講演会講演論文集",,,"No. 150-3","pp. 82-83",2015,Oct.
"松原竜也,金俊完,横田眞一,枝村一弥","ECFジェット駆動ディフューザ形バルブレスマイクロポンプの提案","日本機械学会 2015年度年次大会","日本機械学会 2015年度年次大会DVD論文集【No.15-1】","一般社団法人 日本機械学会",,"No. 15-1",,2015,Sept.
"横田眞一,金俊完","ECFマイクロポンプの高圧化の可能性について",,"JFPS機能性流体との融合化によるフルードパワーシステムの新展開に関する研究委員会 研究成果報告書",,,,,2015,Sept.
"金俊完,横田眞一","MEMS技術を用いたECFジェット用の電極対",,"JFPS機能性流体との融合化によるフルードパワーシステムの新展開に関する研究委員会 研究成果報告書",,,,,2015,Sept.
"Dorantes-Gonzalez, Dante J.,Hwang, Sung Ho,Joon-wan KIM","17th International Conference on Mechatronics Technology, October 15-18, 2013, Jeju Island, Korea",,"MECHATRONICS","PERGAMON-ELSEVIER SCIENCE LTD","Vol. 29",,"pp. 86-86",2015,Aug.
"Tomoya Miyoshi,KAZUHIRO YOSHIDA,Joon-wan KIM,Sang-In Eom,Shinichi Yokota","DEVELOPMENT OF A MEMS-BASED ELECTRO-RHEOLOGICAL MICROFINGER SYSTEM WITH AN ALTERNATING PRESSURE SOURCE","The 18th Int. Conf. on Solid-State Sensors, Actuators and Microsystems (Transducers 2015)","Proc.of the 18th Int. Conf. on Solid-State Sensors, Actuators and Microsystems (Transducers 2015)",,,,"pp. 823-826",2015,June
"金 俊完,三栗野 功大,横田 眞一,枝村 一弥","ECFと五角柱電極アレイを用いた強制液冷システム","平成27年春季フルードパワーシステム講演会","平成27年春季フルードパワーシステム講演会論文集","一般社団法人日本フルードパワーシステム学会",,,"pp. 73-75",2015,May
"吉田 和弘,渡邊 真帆,金 俊完,嚴 祥仁,横田 眞一","平板?円筒電極アレイを用いた交流電気浸透マイクロポンプの開発","平成27年春季フルードパワーシステム講演会","平成27年春季フルードパワーシステム講演会論文集","一般社団法人日本フルードパワーシステム学会",,,"pp. 67-69",2015,May
"清水美咲,金俊完,横田眞一,枝村一弥","DRIEを用いた三角柱ｰスリット型電極対の製作によるECF効果に関する研究","日本設計工学会 2015年度春季大会研究発表講演会","日本設計工学会 2015年度春季大会研究発表講演会講演論文集","公益社団法人 日本設計工学会",,,"pp. 81-82",2015,May
"Dong Han,Hongri Gu,Joon-wan Kim,Shinichi Yokota,Kazuya Edamura","A Novel 3D-Printed Finger Integrated with ECF Micropump","The 6th  International Conference on Manufacturing, Machine Design and Tribology","ICMDT2015 Proceedings",,,,"pp. 124-125",2015,Apr.
"Tomoya Miyoshi,Kazuhiro Yoshida,Joon-wan Kim,Sang In Eom,Shinichi Yokota","Fabrication of a MEMS-Based Electro-Rheological Microfinger System with an Alternating Pressure Source","The 6th  International Conference on Manufacturing, Machine Design and Tribology","ICMDT2015 Proceedings",,,,"pp. 476-477",2015,Apr.
"Tatsuya Matsubara,Joon-wan Kim,Shinichi Yokota,Kazuya Edamura","Proposal of Pumping Aqueous Solution Using ECF Micropump with Diffuser & Nozzle Mechanism","The 6th  International Conference on Manufacturing, Machine Design and Tribology","ICMDT2015 Proceedings",,,,"pp. 326-327(TH-PO-18)",2015,Apr.
"Misaki Shimizu,Joon-wan Kim,Shinichi Yokota,Kazuya Edamura","Proposal of DRIE-Fabricated Silicon Electrode Pairs for ECF Micropumps","The 6th  International Conference on Manufacturing, Machine Design and Tribology","ICMDT2015 Proceedings",,,,"pp. 126-127(TH-D-1-6)",2015,Apr.
"金 俊完","FPMC2013におけるフルードパワー技術研究動向",,"フルードパワーシステム",,"Vol. 46","No. 1","pp. 32-33",2015,Jan.
"吉田 和弘,金 俊完,横田 眞一","IFPEX2014?カレッジコーナーに見る最新技術?横田・吉田・金研究室",,"油空圧技術","日本工業出版","Vol. 53","No. 12","pp. 19-23",2014,Nov.
"近藤一由,金俊完,横田眞一,枝村一弥","点字表示セル用ECFマイクロアクチュエータ","山梨講演会2014","山梨講演会講演論文集","一般社団法人 日本機械学会関東支部",,"No. 140-3","pp. 13-14",2014,Oct.
"Kazuhiro Yoshida,Maho Watanabe,Joon-wan Kim,Sang In Eom,Shinichi Yokota","Development of a Novel AC Electroosmosis Micropump Using Plate-Cylinder Electrode pair","The 18th International Conference on Mechatronics Technology","ICMT2014 The 18th International Conference on Mechatronics Technology",,,,"  ID45",2014,Oct.
"Hongri GU,Joon-wan KIM,Shinichi YOKOTA,Kazuya EDAMURA","3-TRIANGULAR PRISM ELECTRODES DESIGN FOR ELECTRO-CONJUGATE FLUID MICROPUMP","the 9th JFPS International Symposium on Fluid Power Matsue 2014","Proceedings of the 9th JFPS International Symposium on Fluid Power Matsue 2014","The Japan Fluid Power System Society (JFPS)",,,"pp. 571-573",2014,Oct.
"Kazuhiro YOSHIDA,Noboru TSUKAMOTO,Joon-Wan KIM,Sang In EOM,Shinichi YOKOTA","CHARACTERISTICS OF MEMS-BASED DIVIDED ELECTRODE TYPE FLEXIBLE ELECTRO-RHEOLOGICAL VALVE","the 9th JFPS International Symposium on Fluid Power Matsue 2014","Proceedings of the 9th JFPS International Symposium on Fluid Power Matsue 2014",,,,"pp. 435-437",2014,Oct.
"Tomoya MIYOSHI,Kazuhiro YOSHIDA,Joon-wan KIM,Sang In EOM,Shinichi YOKOTA","FABRICATION OF A MEMS-BASED ER MICROGRIPPER WITH ALTERNATING-PRESSURE SOURCE","the 9th JFPS International Symposium on Fluid Power Matsue 2014","Proceedings of the 9th JFPS International Symposium on Fluid Power Matsue 2014","The Japan Fluid Power System Society (JFPS)",,,"pp. 438-441",2014,Oct.
"吉田和弘,渡邊真帆,金俊完,嚴祥仁,横田眞一","平板−円筒電極対を用いた交流電気浸透マイクロポンプの特性評価","山梨講演会2014","山梨講演会講演論文集","一般社団法人 日本機械学会関東支部",,"No. 140-3","pp. 21-22",2014,Oct.
"金俊完,三栗野功大,横田眞一,枝村一弥","MEMS技術による五角柱電極アレイ形ECFマイクロポンプ","山梨講演会2014","山梨講演会講演論文集","一般社団法人 日本機械学会関東支部",,"No. 140-3","pp. 19-20",2014,Oct.
"古木星哉,金俊完,横田眞一,枝村一弥","MEMS技術を用いた集積化によるECFマイクロポンプの高圧化","山梨講演会2014","山梨講演会講演論文集","一般社団法人 日本機械学会関東支部",,"No. 140-3","pp. 17-18",2014,Oct.
"田邊勇典,金俊完,横田眞一,枝村一弥","オンサガー効果によるECFジェットのシミュレーション","山梨講演会2014","山梨講演会講演論文集","一般社団法人 日本機械学会関東支部",,"No. 140-3","pp. 15-16",2014,Oct.
"Kazuyoshi Kondo,Joon-wan Kim,Shinichi Yokota,Kazuya Edamura","Miniaturization of braille cells by utilizing ECF micro actuators","The 18th International Conference on Mechatronics Technology","ICMT2014 The 18th International Conference on Mechatronics Technology",,,,"  ID100",2014,Oct.
"金 俊完","JSME機素潤滑設計部門講演会におけるフルードパワー技術研究",,"フルードパワーシステム",,"Vol. 45","No. 5","pp. 231-232",2014,Sept.
"Joon-wan Kim,Shinichi Yokota,Masaya Satoh,Kazuya Edamura","ECF MICROPUMP-INTEGRATED MICRO HAND BY MEMS TECHNOLOGY","Bath/ASME symposium on fluid power and motion control (FPMC 2014)","Proceedings of ASME/Bath 2014 symposium on fluid power and motion control (FPMC 2014)",,,,"pp. FPMC2014-7843(1-3)",2014,Sept.
"横田 眞一,金 俊完","マイクロ液圧と機能性流体ECFを用いたマイクロ液圧源","第24回フルードパワー国際見本市","第24回フルードパワー国際見本市  カレッジ研究発表展示コーナー論文集","（一社）日本フルードパワーシステム学会",,,"pp. 35-36",2014,Sept.
"吉田和弘,渡邊真帆,金俊完,嚴祥仁,横田眞一","平板─円筒電極を用いた交流電気浸透マイクロポンプの提案","日本機械学会年次大会2014","日本機械学会年次大会2014 DVD論文集","一般社団法人 日本機械学会",,"No. 14-1","  J1130103",2014,Sept.
"Kazuhiro Yoshida,Noboru Tsukamoto,Joon-wan Kim,Shinichi Yokota","A study on a soft microgripper using MEMS-based divided electrode type flexible electro-rheological valves",,"Mechatronics","Elsevier",,,"pp. 1-7",2014,Aug.
"Joon-wan Kim,Koudai Mikurino,Shinichi Yokota,Kazuya Edamura","ECF Micro Hydraulic Power Source by MEMS-Fabricated Pentagonal Prism Electrode Arrays","World Automation Congress 2014（WAC2014）","World Automation Congress 2014（WAC2014）",,,,"pp. 1569917659(1-3)",2014,Aug.
"J.-W. Kim,Masaya Satoh,S. Yokota,K. Edamura","Micropump-Integrated Eccentric Tube Type Microactuator by Electro-Conjugate Fluid","14th International Conference on New Actuators (Actuator2014)","ACTUATOR14","MESSE BREMEN",,,"pp. 410-413",2014,June
"Tomoya Miyoshi,Kazuhiro Yoshida,J.-W. Kim,S. Eom,S. Yokota","Development of a MEMS-Based ER Microgripper Using Alternating-Pressure Source","14th International Conference on New Actuators(ACTUATOR 2014)）","ACTUATOR14","MESSE BREMEN",,,"pp. 394-397",2014,June
"横田 眞一,佐藤 政哉,金 俊完,枝村 一弥","偏心チューブ形アクチュエータを用いたECFマイクロハンドの提案","平成26年春季フルードパワーシステム講演会","平成26年春季フルードパワーシステム講演会講演論文集","一般社団法人 日本フルードパワーシステム学会",,,"pp. 70-72",2014,May
"三栗野 功大,横田 眞一,金 俊完,枝村 一弥","五角柱電極アレイを用いた高出力ECF マイクロポンプの提案","ロボティクス・メカトロニクス講演会2014 in Toyama",,,,,"  3P2-I07",2014,May
"吉田 和弘,塚本 昇,金 俊完,嚴 祥仁,横田 眞一","MEMS技術を用いた電極分割形フレキシブルERマイクロバルブの開発","平成26年春季フルードパワーシステム講演会","平成26年春季フルードパワーシステム講演会講演論文集","一般社団法人 日本フルードパワーシステム学会",,,"pp. 82-84",2014,May
"金俊完,近藤一由,横田眞一,枝村一弥","点字表示器用ECF マイクロアクチュエータ","ロボティクス・メカトロニクス講演会2014 in Toyama","ロボティクス・メカトロニクス講演会2014 講演論文集",,,,"  3P2-G08",2014,May
"古木星哉,金俊完,横田眞一,枝村一弥","MEMS 技術を用いた集積化による高圧ECF マイクロポンプ","ロボティクス・メカトロニクス講演会2014 in Toyama","ロボティクス・メカトロニクス講演会2014 講演論文集",,,,"  3P2-H06",2014,May
"GU Hongri,金 俊完,横田 眞一,枝村 一弥","三角柱−テーパースリット電極対を用いたECFマイクロポンプ","第14回 日本機械学会 機素潤滑設計部門講演会","第14回 日本機械学会 機素潤滑設計部門講演会 講演論文集","一般社団法人 日本機械学会",,"No. 14-6","pp. 137-138",2014,Apr.
"三好 智也,吉田 和弘,金 俊完,嚴 祥仁,横田 眞一","交流圧力源を用いたMEMS-ERマイクログリッパに関する研究","第14回 日本機械学会 機素潤滑設計部門講演会","第14回 日本機械学会 機素潤滑設計部門講演会 講演論文集","一般社団法人 日本機械学会",,"No. 14-6","pp. 35-36",2014,Apr.
"吉田 和弘,嚴 祥仁,金 俊完,横田 眞一","機能性流体ERFを用いたマイクロアクチュエータシステム","第24回フルードパワー国際見本市","第24回フルードパワー国際見本市  カレッジ研究発表展示コーナー論文集","（一社）日本フルードパワーシステム学会",,,"pp. 37-38",2014,
"佐藤政哉,金俊完,横田眞一,枝村 一弥","ECF マイクロポンプ組込偏心チューブ形マイクロアクチュエータに関する研究","平成25年秋季フルードパワーシステム講演会","平成25年秋季フルードパワーシステム講演会 講演論文集",,,,"pp. 112-114",2013,Nov.
"J.-w. Kim,satoru yamasita,S. Yokota,K. Edamura","Flexible Microgripper by Integrating Balloon-type Microactuators with Built-in ECF Micropumps","The 12th International Symposium on Fluid Control, Measurement and Visualization (FLUCOME 2013)","The 12th International Symposium on Fluid Control, Measurement and Visualization (FLUCOME 2013)",,,,"  OS5-02-4",2013,Nov.
"K. Yoshida,N. Tsukamoto,J.-W. Kim,SHINICHI YOKOTA","A Divided Electrode Type Flexible Electro-Rheological Valve Fabricated by MEMS Technologies","The 12th International Symposium on Fluid Control, Measurement and Visualization (FLUCOME 2013)","The 12th International Symposium on Fluid Control, Measurement and Visualization (FLUCOME 2013)",,,,"  OS5-01-1",2013,Nov.
"Kazuhiro Yoshida,Noboru Tsukamoto,Joon-Wan Kim,Shinichi Yokota","A Microgripper Using MEMS-Based Divided Electrode Type Flexible Electro-Rheological Valves","17th International Conference on Mechatronics Technology (ICMT2013)","17th International Conference on Mechatronics Technology (ICMT2013) PROCEEDINGS",,,,"pp. 107-109",2013,Oct.
"佐藤 政哉,金 俊完,横田 眞一,枝村 一弥","ECFジェット駆動偏心チューブマイクロアクチュエータの特性評価","山梨講演","山梨講演会講演論文集",,,"No. 130-3","pp. 26-27",2013,Oct.
"Hongri Gu,Joon-wan Kim,Shinichi Yokota,Kazuya Edamura","Study on Output Characteristics of downsized ECF micropump","17th International Conference on Mechatronics Technology (ICMT2013)","17th International Conference on Mechatronics Technology (ICMT2013) PROCEEDINGS",,,,"pp. 283-285",2013,Oct.
"Sang In Eom,Shinichi Yokota,Joon-Wan Kim,Kazuhiro Yoshida,Kazuya Edamura","A silicone rubber bimorph actuator driven by bidirectional ECF jet generator","17th International Conference on Mechatronics Technology (ICMT2013)","17th International Conference on Mechatronics Technology (ICMT2013) PROCEEDINGS",,,,"pp. 149-151",2013,Oct.
"Kazuhiro Yoshida,Tomoyuki Sato,Sang In Eom,Joon-Wan Kim,Shinichi Yokota","Development of an AC Electroosmotic Micropump Using Square Pole - Slit Electrodes","17th International Conference on Mechatronics Technology (ICMT2013)","17th International Conference on Mechatronics Technology (ICMT2013) PROCEEDINGS",,,,"pp. 146-148",2013,Oct.
"吉田 和弘,塚本 昇,金 俊完,横田 眞一","MEMS技術を用いた電極分割形フレキシブルERバルブ","山梨講演会","山梨講演会講演論文集",,,"No. 130-3","pp. 22-23",2013,Oct.
"金 俊完","平成24年度の機能性流体分野の研究動向",,"フルードパワーシステム",,"Vol. 44","No. E1","pp. E16-E18",2013,Sept.
"グ ホンリ,金 俊完,横田 眞一,枝村 一弥","電極対のマイクロ化によるECF効果に関する研究","日本機械学会 2013年度年次大会","2013年度年次大会 ＤＶＤ論文集 2013年9月7日発行",,"  J114012",,,2013,Sept.
"金 俊完,近藤 一由,横田 眞一,枝村 一弥","MEMS技術を用いた針?円筒スリット形ECFマイクロ液圧源","日本機械学会 2013年度年次大会","2013年度年次大会 ＤＶＤ論文集",,"  J114013",,,2013,Sept.
"嚴 祥仁,横田 眞一,金 俊完,枝村 一弥","両方向ECFマイクロポンプによるマイクロアクチュエータの駆動","日本機械学会 2013年度年次大会","2013年度年次大会 ＤＶＤ論文集",,"  J114023",,,2013,Sept.
"金 俊完,山田 嘉穂,横田 眞一,枝村 一弥","多層化による高アスペクト比電極対を用いたECFマイクロポンプ","平成25年春季フルードパワーシステム講演会",,,,,"pp. 109-111",2013,May
"佐藤政哉,金俊完,横田眞一,枝村 一弥","ECFマイクロポンプ組み込み可変焦点形液体レンズに関する研究","ロボティクス・メカトロニクス講演会2013","ロボティクス・メカトロニクス講演会2013講演論文集",,,,"  2A1-D11",2013,May
"吉田和弘,塚本昇,金俊完,横田眞一","電極分割形フレキシブルER バルブを用いたマイクログリッパ","日本機械学会ロボティクス・メカトロニクス講演会2013","日本機械学会ロボティクス・メカトロニクス講演会2013講演論文集",,,,"  2A1-D08",2013,May
"Joon-wan Kim,satoru yamasita,Shinichi Yokota,Kazuya Edamura","Micropump-Integrated Balloon Type Microactuators","The 5th International Conference on Manufacturing, Machine Design and Tribology（ICMDT2013 ）",,,,,"pp. 143",2013,May
"Kazuhiro Yoshida,Tomoyuki Sato,Sang In Eom,Joon-wan Kim,Shinichi Yokota","An AC Electroosmotic Micropump Using Square Pole - Slit Electrodes","The 5th International Conference on Manufacturing, Machine Design and Tribology",,,,,"p. 141",2013,May
"Joon-wan Kim,Yoshiho Yamada,Shinichi Yokota,Kazuya Edamura","High Performance ECF Micropump by the 3D Integration of MEMS-fabricated Eectrodes","The 8th International Conference on Fluid Power Transmission and Control (ICFP 2013)","Proceedings of the Eighth International Conference on Fluid Power Transmission and Control (ICFP 2013)","World Publishing Corporation",,,"pp. 68-72",2013,Apr.
"金俊完","ROBOMEC2012におけるフルードパワー技術研究動向",,"フルードパワーシステム : 日本フルードパワーシステム学会誌 : journal of the Japan Fluid Power System Society","日本フルードパワーシステム学会","Vol. 43","No. 6","pp. 370-372",2012,Nov.
"金 俊完","ROBOMEC2012におけるフルードパワー技術研究動向",,"フルードパワーシステム",,"Vol. 43","No. 6","pp. 370-371",2012,Nov.
"吉田 和弘,佐藤 智之,嚴 祥仁,金 俊完,横田 眞一","スリット―直方体電極対を用いた交流電気浸透マイクロポンプ","第21回ＭＡＧＤＡコンファレンス","第21回ＭＡＧＤＡコンファレンス講演論文集","日本ＡＥＭ学会",,,"pp. 275-275",2012,Nov.
"Yoshiho Yamada,Joon-wan Kim,Shinichi Yokota,Kazuya Edamura","ECF Micropump by the 3D Integration of MEMS-fabricated Triangular Prism and Slit (TPS) Electrode Pairs","16th International Conference on Mechatronics Technology","16th International Conference on Mechatronics Technology PROCEEDINGS",,,,"pp. 10-14",2012,Oct.
"Sang In Eom,Shinichi Yokota,Joon-wan Kim,Kazuya Edamura","New Design of an Electrode for ECF Jet Micro Cylinder","16th International Conference on Mechatronics Technology","16th International Conference on Mechatronics Technology PROCEEDINGS",,,,"pp. 6-9",2012,Oct.
"山下悟,金俊完,横田眞一,枝村 一弥","ECFジェット駆動バルーン形マイクロアクチュエータ","山梨講演会","山梨講演会講演論文集","社団法人 日本機械学会関東支部",,"No. 120-3","pp. 16-17",2012,Oct.
"吉田 和弘,佐藤 智之,嚴 祥仁,金 俊完,横田 眞一","スリット?直方体電極対を用いた交流電気浸透マイクロポンプの特性評価","山梨講演会","山梨講演会講演論文集","社団法人 日本機械学会関東支部",,"No. No.120-3","pp. 18-19",2012,Oct.