"Yuval Kahlon,Weiheng Hu,Momoko Nakatani,Jiang Zhu,Takuya Oki,Yichuan Zhu,Haruyuki Fujii","The Holographic Studio: Real-time virtual teleportation in Mixed Reality for Enhancing Design Education","41st Education and Research in Computer Aided Architectural Design in Europe (eCAADe) Conference","eCCADe2023 Digital Design Reconsidered",,"Vol. 1",,"pp. 139-148",2023,Sept.
"Hibiki Yamazaki,Jiang Zhu,Tomohisa Tanaka","Study on the Surface Enhancement of Thin-Walled Metallic Materials Using a Novel Double-Side Burnishing Tool",,"International Journal of Automation Technology","Fuji Technology Press Ltd.","Vol. 17","No. 5","pp. 458-468",2023,Sept.
"Ryoukou Kamiya,JIANG ZHU,TOMOHISA TANAKA","Burnishing of thin plate material using a rolling ball point tool","2023年度砥粒加工学会学術講演会","2023年度砥粒加工学会学術講演会講演論文集","公益社団法人 砥粒加工学会",,,,2023,Aug.
"Kazuaki Tokumo,JIANG ZHU,TOMOHISA TANAKA","High precision NC machining based on 3D measurement of position and posture in workpiece attachment process","日本機械学会生産システム部門研究発表講演会2023","日本機械学会生産システム部門研究発表講演会2023講演論文集","一般社団法人 日本機械学会",,"No. 23-10",,2023,Mar.
"Jiang Zhu","Challenge for the next generation smart manufacturing revolutionized by digital technology","The Sixth International Conference on Industrial Informatics - Computing Technology, Intelligent Technology, Industrial Information Integration",,,,,,2022,Dec.
"Hibiki Yamazaki,JIANG ZHU,TOMOHISA TANAKA","Burnishing tool capable of surface modification of thin plate material","The 19th International Machine Tool Engineers' Conference","Proceeding of the IMEC2022","Japan Machine Tool Builders’ Association",,,"pp. 54-55",2022,Nov.
"hibiki yamazaki,jiang zhu,tomohisa tanaka","Verification of the effectiveness of DSB tool in increasing the strength of thin plate material parts","The 19th International Conference on Precision Engineering","Proceeding of the 19th International Conference on Precision Engineering","The Japan Society for Precision Engineering",,,,2022,Nov.
"JIANG ZHU,TOMOHISA TANAKA","Surface modification of magnesium alloy using a new developed burnishing tool with constant force control",,"Journal of the Japan Society for Abrasive Technology","公益社団法人 砥粒加工学会","Vol. 66","No. 10","pp. 558-561",2022,Oct.
"Yuval Kahlon,Momoko Nakatani,Haruyuki Fujii,Takuya Oki,Jiang Zhu,Santosh Maurya","A User Study For Facilitating Effective Remote Education In Design Studios: Towards Integration of Cyber-physical Technologies Into Design Education","The 24th International Conference on Engineering and Product Design Education","Proceeding of the 24th International Conference on Engineering and Product Design Education","Institution of Engineering Designers (IED)",,,,2022,Sept.
"Santosh MAURYA,Yuval KAHLON,Takuya OKI,Jiang ZHU,Momoko NAKATANI,Yufei LIU","UTILIZING MR TECHNOLOGIES FOR ESSENTIAL PROJECT-BASED LEARNING IN DESIGN EDUCATION","The 24th International Conference on Engineering and Product Design Education","Proceeding of the 24th International Conference on Engineering and Product Design Education","Institution of Engineering Designers (IED)",,,,2022,Sept.
"Hibiki Yamazaki,JIANG ZHU,TOMOHISA TANAKA","Evaluation of the burnishing process of sheet metal materials by double side burnishing tool","2022年度精密工学会春季大会学術講演会","2022年度精密工学会春季大会学術講演会論文集","一般社団法人 精密工学会",,,"pp. 731-732",2022,Mar.
"Masaya Morinaga,TOMOHISA TANAKA,JIANG ZHU,大谷祐輔","Development of a complex groove grinding path derivation algorithm for the manuifacture of high performance end mills","生産システム部門研究発表講演会2022","生産システム部門研究発表講演会2022講演論文集","一般社団法人 日本機械学会",,,,2022,Mar.
"hibiki yamazaki,jiang zhu,tomohisa tanaka","Development of a novel burnishing tool for surface modificatio of thin-walled materials","The 10th International Conference on Leading Edge Manufacturing in 21st Century (LEM21)","Proceeding of the 10th International Conference on Leading Edge Manufacturing in 21st Century (LEM21)","The Japan Society of Mechanical Engineers",,,,2021,Nov.
"Muslimin,Katerina Mukti,Hasvienda M. Ridlwan,M. Sholeh,Ade Sumpena,Jiang Zhu,Hayato Yoshioka,Tomohisa Tanaka","Direct NC Toolpath Generation from 3D Point Cloud Datasets","the 9th Annual Southeast Asian International Seminar","Proceedings of the 9th Annual Southeast Asian International Seminar (ASAIS 2020)","Science and Technology Publications",,,"pp. 138-145",2021,Oct.
"Jiang Zhu,Chenyao Cao,Sheng Jin,Yuanrui Zhang,Tomohiro Yamazaki","Real-time vehicle occupation status detection system by integrating cloud computation and machine learning","2021 IEEE International Conference on Artificial Intelligence and Computer Applications","Proceeding of 2021 IEEE International Conference on Artificial Intelligence and Computer Applications","IEEE",,,,2021,June
"Sheng Jin,Yuanrui Zhang,Tomohiro Yamazaki,Jiang Zhu","Automatic 3D CAD Model and 2D Drawings Generation in Construction Engineering",,"Journal of Physics: Conference Series","IOP Publishing","Vol. 1827",,,2021,Mar.
"Masaya Morinaga,TOMOHISA TANAKA,JIANG ZHU,大谷祐輔","Algorithm for calculate desired machining parameters of grinding wheel for end mill groove","日本機械学会生産システム部門研究発表講演会2021","生産システム部門研究発表講演会2021 講演論文集","一般社団法人 日本機械学会",,,,2021,Mar.
"Jiang Zhu,Da Xie,Tomohisa Tanaka","Recognition of Multi-Intersecting Features of Boundary Representation CAD Model",,"Journal of Physics: Conference Series","IOP Publishing","Vol. 1827",,,2021,Mar.
"Da Xie,Jiang Zhu,Tomohisa Tanaka","Graph-based Feature Recognition and Combination Method for Automatic Process Planning System","JSME 2020 Conference on Leading Edge Manufacturing/Material and Processing","Proceedings of JSME 2020 Conference on Leading Edge Manufacturing/Material and Processing","The American Society of Mechanical Engineers",,,,2020,June
"Chenyao Cao,Jiang Zhu,Tomohisa Tanaka,Dinh Ngoc Pham","Investigation of Corrosion Resistance Enhancement for Biodegradable Magnesium Alloy by Ball Burnishing Process",,"International Journal of Automation Technology","Fuji Technology Press Ltd.","Vol. 14","No. 2","pp. 175-183",2020,Mar.
"Jiang Zhu,Chenyao Cao,Tomohisa Tanaka","Corrosion Resistance Enhancement of Biodegradable Magnesium by Ball Burnishing Processing","The Tenth International Forum on Advanced Material Science and Technology",,,,,,2019,Dec.
"Jiang Zhu,Yurio Hosaka,Hayato Yoshioka","A Robust Algorithm to Remove the Self-intersection of 3D Mesh Data without Changing the Original Shape",,"Journal of physics : conference series","IOP Publishing","Vol. 1314","No. 1",,2019,Nov.
"Chenyao Cao,Jiang Zhu,Tomohisa Tanaka","Influence of Burnishing Process on Microstructure and Corrosion Properties of Mg Alloy AZ31","International Conference on Advanced Surface Enhancement",,,,,,2019,Sept.
"Chenyao Cao,Jiang Zhu,Tomohisa Tanaka,Fang-Jung Shiou,Shunichi Sawada,Hayato Yoshioka","Ball Burnishing of Mg Alloy Using a Newly Developed Burnishing Tool with On-machine Force Control",,"International Journal of Automation Technology","Fuji Technology Press Ltd.","Vol. 13","No. 5","pp. 619-630",2019,Sept.
"Leandro Batista da silva,Hayato Yoshioka,Hidenori Shinno,Jiang Zhu","Tool Orientation Angle Optimization for a Multi-axis Robotic Milling System",,"International Journal of Automation Technology","Fuji Technology Press Ltd.","Vol. 13","No. 5","pp. 574-582",2019,Sept.
"Minghui Shi,Kai Feng,Junhui Hu,Jiang Zhu,Hailong Cui","Near-field acoustic levitation and applications to bearings: a critical review",,"International Journal of Extreme Manufacturing","IOP Publishing","Vol. 1",,,2019,Sept.
"Chenyao Cao,Jiang Zhu,Tomohisa Tanaka","Influence of Burnishing Process on Microstructure and Corrosion Properties of Mg Alloy AZ31",,"Advanced Surface Enhancement. Lecture Notes in Mechanical Engineering","Springer, Singapore",,,"pp. 97-107",2019,Aug.
"Jiang Zhu","Adcanced Researches on Digital Manufacturing and Intelligent Manufacturing","3rd International Conference on Electrical, Mechanical and Computer Engineering",,,,,,2019,June
"Yasunori Sakai,TOMOHISA TANAKA,Shunnya Kobayashi,JIANG ZHU","異方剛性設計を施したパッシブダンパP-DACSを内包する構造物の振動応答","日本機械学会 生産システム部門研究発表講演会2019",,"日本機械学会",,,,2019,Mar.
"Chenyao Cao,JIANG ZHU,TOMOHISA TANAKA,Yasunori Sakai","Influence of processing condition on surface modification effect of Mg alloys by ball burnishing process","2019年度精密工学会春季大会学術講演会","2019年度精密工学会春季大会学術講演会講演論文集","公益社団法人 精密工学会",,,,2019,Mar.
"Shunnya Kobayashi,Yasunori Sakai,TOMOHISA TANAKA,JIANG ZHU","Development of Structure Integrated Passive Damper (P-DACS)","the 18th International Machine Tool Engineers` Conference","Proceeding of the 18th International Machine Tool Engineers' Conference","Japan Machine Tool Builders' Association",,,"pp. 18-19",2018,Nov.
"Leandro Batista Da Silva,JIANG ZHU,Hayato Yoshioka","Tool path optimization for multi-axis robotic milling system","the 18th International Machine Tool Engineers` Conference","Proceeding of the 18th International Machine Tool Engineers' Conference","Japan Machine Tool Builders' Association",,,"pp. 90-91",2018,Nov.
"Chenyao Cao,JIANG ZHU,TOMOHISA TANAKA,Yasunori Sakai","Modification of Metal Structure Based on Burnishing Processing","the 18th International Machine Tool Engineers` Conference","Proceeding of the 18th International Machine Tool Engineers' Conference","Japan Machine Tool Builders' Association",,,"pp. 30-31",2018,Nov.
"Jiang Zhu","Laser measurement and machining technology and its application in intelligent and integrated manufacturing","Overseas Chinese Young Scholars Forum in Optoelectronics Field",,,,,,2018,June
"Jingyou Wu,TOMOHISA TANAKA,JIANG ZHU,Yasunori Sakai","Laser coloring on titanium by controlling oxide film formation mode","2018年度精密工学会春季大会学術講演会","2018年度精密工学会春季大会学術講演会講演論文集","公益社団法人 精密工学会",,,,2018,Mar.
"Takumi Kobayashi,Yasunori Sakai,TOMOHISA TANAKA,JIANG ZHU","Influence of geometrical parameters of passive-damper with anisotropic composite structure (P-DACS) on its dynamical characteristics","2018年度精密工学会春季大会学術講演会","2018年度精密工学会春季大会学術講演会講演論文集","公益社団法人 精密工学会",,,,2018,Mar.
"JIANG ZHU,Akira Tajima,TOMOHISA TANAKA,Hayato Yoshioka","Study on the accuracy improvement for laser forming processing of micro-wire","The 9th International Conference on Leading Edge Manufacturing in 21st Century","Proceeding of The 9th International Conference on Leading Edge Manufacturing in 21st Century","Japan Society of Mechanical Engineers",,,,2017,Nov.
"Yoshiyuki Sankai,JIANG ZHU,Hidetake Tanaka","サイバニクスで社会課題の解決に挑戦",,"精密工学会誌","公益社団法人 精密工学会","Vol. 83","No. 17","pp. 979-982",2017,Nov.
"Fang-Jung Shiou,Shih-Ju Huang,Albert J. Shih,Jiang Zhu,Masahiko Yoshino","Fine surface finish of a hardened stainless steel using a new burnishing tool",,"Procedia Manufacturing","Elsevier","Vol. 10",,"pp. 208-217",2017,July
"Yoshioka, H.,Shinno, H.,Zhu, J.,Uchiumi, M","A newly developed zero-gravity vertical motion mechanism for precision machining",,"CIRP Annals - Manufacturing Technology",,"Vol. 66","No. 1","pp. 389-392",2017,July
"Shunsuke Hotta,Hayato Yoshioka,Jiang Zhu,Tomohisa Tanaka","The Influence of Laser Irradiation Parameters to the Surface Condition and the Color of Titanium","2017年度精密工学会春季大会学術講演会","2017年度精密工学会春季大会学術講演会講演論文集","公益社団法人 精密工学会",,,,2017,Mar.
"Satoshi Inoue,Yasunori Sakai,TOMOHISA TANAKA,Hayato Yoshioka,JIANG ZHU,星出薫,古澤竜二","Elucidation of Contact State of Rolling Elements Used for Carriage of Rolling Guideway in Static State","2017年度精密工学会春季大会学術講演会","2017年度精密工学会春季大会学術講演会講演論文集","公益社団法人 精密工学会",,,,2017,Mar.
"Manabu UCHIUMI,Hayato YOSHIOKA,Jiang ZHU","The Study on the Relation of Dynamic Stiffness and Joint of Mother Machine with CFRP","2017年度精密工学会春季大会学術講演会","2017年度精密工学会春季大会学術講演会講演論文集","公益社団法人 精密工学会",,,,2017,Mar.
"Yasunori Sakai,TOMOHISA TANAKA,JIANG ZHU","金属と高分子を複合 した異方構造を有す るパッシブダンパ （P-DACS）の制振 性能に及ぼすダンパ 形状及び高分子物性 の影響","2017年度精密工学会春季大会学術講演会","2017年度精密工学会春季大会学術講演会講演論文集","公益社団法人 精密工学会",,,,2017,Mar.
"Jumpei YAMAUCHI,Jiang ZHU,Hayato YOSHIOKA","Influence from vibration characteristic of multi-tasking machine for cutting force estimation with disturbance observer","2017年度精密工学会春季大会学術講演会","2017年度精密工学会春季大会学術講演会講演論文集","公益社団法人 精密工学会",,,,2017,Mar.
"Shunichi SAWADA,Jiang Zhu,Fang-Jung Shiou,Hayato Yoshioka","Study on ball burnishing tool enabling constant force control","2017年度精密工学会春季大会学術講演会","2017年度精密工学会春季大会学術講演会講演論文集","公益社団法人 精密工学会",,,,2017,Mar.
"Jiang Zhu","Research on Digital Manufacturing","第11回Kodatunoオープンセミナ",,,,,,2017,Jan.
"Jiang Zhu","Current Trends and Future Direction  on Digital and Intelligent Manufacturing","2016 Yuelu Forum of  International Young Scholars","2016 Yuelu Forum of  International Young Scholars Engineering/Material Science","Hunan University",,,,2016,Dec.
"Yasunori Sakai,So Fukasawa,Jiang Zhu,Hayato Yoshioka,Tomohisa Tanaka,Kaoru Hoshide,Ryuji Furusawa","Influence of Designing Parameters on Vibration Damping of Rolling Guideway","16th International Conference on Precision Engineering","Proceeding of 16th International Conference on Precision Engineering","The Japan Society for Precision Engineering",,,,2016,Nov.
"Shunsuke Hotta,Jiang Zhu,Hayato Yoshioka,Tomohisa Tanaka","Study on the mechanism of titanium oxide layer growth by laser irradiation on titanium","16th International Conference on Precision Engineering","Proceeding of 16th International Conference on Precision Engineering","The Japan Society for Precision Engineering",,,,2016,Nov.
"Jiang Zhu,Shunsuke Hotta,Hayato Yoshioka,Tomohisa Tanaka","Study on the titanium oxide layer generation mechanism by YVO4 laser irradiation on titanium","the 8th Japan-Taiwan workshop on mechanical engineering and aerospace","Proceeding of the 8th Japan-Taiwan workshop on mechanical engineering and aerospace",,,,,2016,Nov.
"Hayato Yoshioka,Jiang Zhu,Toshiki Hanaoka,Yasunori Sakai","Influence of angular error in multi-axis machine tool on estimation of Machining force by disturbance observer","the 17th International Machine Tool Engineers` Conference","Proceedings of the 17th International Machine Tool Engineers` Conference","Japan Machine Tool Builders' Association",,,"pp. 132-133",2016,Nov.
"Shunsuke Hotta,Jiang Zhu,Tomohisa Tanaka,Hayato Yoshioka","Titanium Coloring Machining by Laser Irradiation","the 17th International Machine Tool Engineers` Conference","Proceedings of the 17th International Machine Tool Engineers` Conference","Japan Machine Tool Builders' Association",,,"pp. 84-85",2016,Nov.
"Yasunori Sakai,TOMOHISA TANAKA,JIANG ZHU","Influence of filler condition on damping capacity of synthetic resin","第11回日本機械学会生産加工・工作機械部門講演会","第11回生産加工・工作機械部門講演会 講演論文集","日本機械学会",,,"pp. 137-138",2016,Oct.
"Shunichi Sawada,JIANG ZHU,修芳仲,Hayato Yoshioka","ロードセルを内蔵した工具を用いたSUS420材のボールバニシング加工","第11回日本機械学会生産加工・工作機械部門講演会","第11回生産加工・工作機械部門講演会 講演論文集",,,,"pp. 137-138",2016,Oct.
"Muslimin,Zhu, J.,Yoshioka, H.,Tanaka, T.","Automatic segmentation and feature identification of laser scanning point cloud data for reverse engineering","International Symposium on Flexible Automation","Proceedings of International Symposium on Flexible Automation",,,,,2016,Aug.
"Yurio Hosaka,JIANG ZHU,Hayato Yoshioka","Self-intersection remove method of 3D-mesh without changing the original shape","日本機械学会関東支部第22期総会講演会","日本機械学会関東支部第22期総会講演会講演論文集","日本機械学会",,"No. 160-1",,2016,Mar.
"Akira Tajima,Hayato Yoshioka,JIANG ZHU,TOMOHISA TANAKA","Improvement of the processing precision in the laser forming for metal wire","2016年度精密工学会春季大会学術講演会","2016年度精密工学会春季大会学術講演会講演論文集","精密工学会",,,"pp. 817-818",2016,Mar.
"Toshiki Hanaoka,JIANG ZHU,Hayato Yoshioka,Yasunori Sakai","Influence from vibration characteristic of multi-tasking machine for cutting force estimation with disturbance observer","2016年度精密工学会春季大会学術講演会","2016年度精密工学会春季大会学術講演会講演論文集","精密工学会",,,"pp. 761-762",2016,Mar.
"Yasunori Sakai,JIANG ZHU,Hayato Yoshioka,TOMOHISA TANAKA","Influence of Lubricating oil on nonlinear frequency response characteristic of rolling guideway","2016年度精密工学会春季大会学術講演会","2016年度精密工学会春季大会学術講演会講演論文集","精密工学会",,,"pp. 739-740",2016,Mar.
"Syunsuke Hotta,Hayato Yoshioka,JIANG ZHU,TOMOHISA TANAKA","Coloring of Titanium by using YVO4 Laser -Relation between laser parameters and coloring-","日本機械学会関東支部第22期総会講演会","日本機械学会関東支部第22期総会講演会講演論文集","日本機械学会",,"No. 160-1",,2016,Mar.
"Sou Fukasawa,Yasunori Sakai,JIANG ZHU,Hayato Yoshioka,TOMOHISA TANAKA,星出 薫,古澤竜二","Influence of Contact Condition of Rolling Elements on Damping Characteristics of Rolling Guideway","日本機械学会関東支部第22期総会講演会","日本機械学会関東支部第22期総会講演会講演論文集","日本機械学会",,"No. 160-1",,2016,Mar.
"Yasunori Sakai,Sou Fukasawa,JIANG ZHU,Hayato Yoshioka,TOMOHISA TANAKA,星出 薫,古澤竜二","Development of Measuring Apparatus for Contact Damping of Rolling Guideway","日本機械学会関東支部第22期総会講演会","日本機械学会関東支部第22期総会講演会講演論文集","日本機械学会",,"No. 160-1",,2016,Mar.
"Leandro Batista Da Silva,Yasunori Sakai,JIANG ZHU,Hayato Yoshioka","Influence of Machining Conditions on Cut Quality of Laser Diced SiC Wafer","日本機械学会関東支部第22期総会講演会","日本機械学会関東支部第22期総会講演会講演論文集","日本機械学会",,"No. 160-1",,2016,Mar.
"Muslimin,Jiang ZHU,Hayato YOSHIOKA,Tomohisa TANAKA,Yoshio SAITO","Study on plane feature extraction in registration of laser scanning data sets for reverse engineering",,"Journal of Advanced Mechanical Design, Systems, and Manufacturing",,"Vol. 9","No. 5","pp. 1-14",2015,Dec.
"Tomohisa Tanaka,Shinya Oishi,Jiang Zhu,Yoshio Saito","Study on the mechanism of laser forming to the thin stainless-steel wire",,"International Journal of Nanomanufacturing","Inderscience Enterprises Ltd.","Vol. 11","No. 3/4","pp. 219-236",2015,Nov.
"Muslimin,Jiang Zhu,Hayato Yoshioka,Tomohisa Tanaka,Yoshio Saito","The Utilization of Feature Extraction in Registration Method of Laser Data Sets in Reverse Engineering of Fidelity and Precision Part","The 8th International Conference on Leading Edge Manufacturing in 21st Century","Proceeding of the 8th International Conference on Leading Edge Manufacturing in 21st Century","the Japan Society of Mechanical Engineers",,,,2015,Oct.
"Tomohisa Tanaka,Syo Harada,Jiang Zhu,Hayato Yoshioka,Yoshio Saito","Fundamental Study for Control of Hue and Brightness in the Laser Coloring","The 8th International Conference on Leading Edge Manufacturing in 21st Century","Proceeding of the 8th International Conference on Leading Edge Manufacturing in 21st Century","the Japan Society of Mechanical Engineers",,,,2015,Oct.
"Yasunori Sakai,JIANG ZHU,Hayato Yoshioka,TOMOHISA TANAKA","有限要素法を用いたローラガイドの鉛直及び横方向剛性の同定","日本機械学会2015年度年次大会",,,,,,2015,Sept.
"Jiang Zhu,Masato Kato,Hayato Yoshioka,Yoshio Saito,Tomohisa Tanaka","Research on Feature Recognition from STEP model for Automatic Process Planning of Multi-tasking Machine","The 6th International Conference of Asian Society for Precision Engineering and Nanotechnology (ASPEN2015)","Proceeding of the 6th International Conference of Asian Society for Precision Engineering and Nanotechnology (ASPEN2015)","Asian Society for Precision Engineering and Nanotechnology(ASPEN)",,,,2015,Sept.
"Jiang ZHU,Masato KATO,Tomohisa TANAKA,Hayato YOSHIOKA,Yoshio SAITO","Graph based automatic process planning system for multi-tasking machine",,"Journal of Advanced Mechanical Design, Systems, and Manufacturing","The Japan Society of Mechanical Engineers","Vol. 9","No. 3",,2015,Aug.
"Jiang Zhu,Yoshio Saito","Research on the Machining Characteristic of ABS Resin and the Possibility of Hybrid Manufacturing Method Combining Additive Manufacturing and Machining","日本設計工学会2015年度春季大会研究発表講演会","日本設計工学会2015年度春季大会研究発表講演会講演論文集","公益社団法人 日本設計工学会",,,"pp. 51-52",2015,May
"Sho Harada,JIANG ZHU,TOMOHISA TANAKA,Hayato Yoshioka,YOSHIO SAITO","Research on Titanium Coloring using Laser Irradiation -Improvement repeatability in coloring marking and realization of wide color space","JSME Manufacturing Systems Division Conference 2015","Proceesing of JSME Manufacturing Systems Division Conference 2015","The Japan Society of Mechanical Engineers",,"No. 15-8","pp. 109-110",2015,Mar.
"Yasunori Sakai,Hayato Yoshioka,Jiang Zhu,Yoshio Saito,Tomohisa Tanaka","Analysis of Nonlinear Friction Induced Vibration of Rolling Guideway by Using Complex Spring","Spring Annual Meeting of the Japan Society for Procession Engineering 2015","Proceeding of Spring Annual Meeting of the Japan Society for Procession Engineering 2015","The Japan Society of Precision Engineering",,,"pp. 351-352",2015,Mar.
"Huiwei Gao,Jiang Zhu,Hayato Yoshioka,Yoshio Saito,Tomohisa Tanaka","Construction of Flexible Production Scheduling System Using Autonomous Distributed Systems","Spring Annual Meeting of the Japan Society for Procession Engineering 2015","Proceeding of Spring Annual Meeting of the Japan Society for Procession Engineering 2015","The Japan Society of Precision Engineering",,,"pp. 267-268",2015,Mar.
"Muslimin,Jiang Zhu,Hayato Yoshioka,Tomohisa Tanaka,Yoshio Saito","A New Method for Registration Laser Data Sets and CMM Data Sets in Reverse Engineering of Accurate Part","Spring Annual Meeting of the Japan Society for Procession Engineering 2015","Proceeding of Spring Annual Meeting of the Japan Society for Procession Engineering 2015","The Japan Society of Precision Engineering",,,"pp. 1101-1102",2015,Mar.
"Saurabh Bhide,Jiang Zhu,Hayato Yoshioka,Tomohisa Tanaka,Yoshio Saito","Calculation of Intersection Points between Triangulated Mesh and Point Cloud Data","Spring Annual Meeting of the Japan Society for Procession Engineering 2015","Proceeding of Spring Annual Meeting of the Japan Society for Procession Engineering 2015","The Japan Society of Precision Engineering",,,"pp. 1099-1100",2015,Mar.
"Mikiya Hara,Jiang Zhu,Hayato Yoshioka,Yoshio Saito,Tomohisa Tanaka","Study on Effect of Cutting Parameter on Accuracy of Surface in the Milling of Polytetrafluoroethylene","Spring Annual Meeting of the Japan Society for Procession Engineering 2015","Proceeding of Spring Annual Meeting of the Japan Society for Procession Engineering 2015","The Japan Society of Precision Engineering",,,"pp. 1039-1040",2015,Mar.
"Masato Kato,Jiang Zhu,Hayato Yoshioka,Yoshio Saito,Tomohisa Tanaka","Graph based automatic process planning system for multi-tasking machine","Spring Annual Meeting of the Japan Society for Procession Engineering 2015","Proceeding of Spring Annual Meeting of the Japan Society for Procession Engineering 2015","The Japan Society of Precision Engineering",,,"pp. 773-774",2015,Mar.
"Shigenobu Nagase,Jiang Zhu,Hayato Yoshioka,Yoshio Saito,Tomohisa Tanaka","Efficiency of the free-form surface machining with optimum tool-path for each segment","Spring Annual Meeting of the Japan Society for Procession Engineering 2015","Proceeding of Spring Annual Meeting of the Japan Society for Procession Engineering 2015","The Japan Society of Precision Engineering",,,"pp. 771-772",2015,Mar.
"Yasunori SAKAI,Tomohisa TANAKA,Hayato YOSHIOKA,Jiang ZHU,Masaomi TSUTSUMI,Yoshio SAITO","Influence of nonlinear spring behavior of friction on dynamic characteristics of a rolling guideway",,"Journal of Advanced Mechanical Design, Systems, and Manufacturing","The Japan Society of Mechanical Engineers","Vol. 9","No. 1","pp. 1-15",2015,Jan.
"yuanrui zhang,JIANG ZHU,Hayato Yoshioka,YOSHIO SAITO,TOMOHISA TANAKA","Study on the error compensation and accuracy improvement of 6-DOF parallel mechanism worktable","the 16th International Machine Tool Engineers` Conference","Proceeding of the 16th International Machine Tool Engineers` Conference","Japan Machine Tool Builders' Association",,,,2014,Nov.
"Yasunori SAKAI,Jiang Zhu,Tomohisa Tanaka,Hayato Yoshioka,Yoshio Saito","Influence of Hysteresis Behavior of Friction on Dynamic Characteristics of Rolling Guideway","MECHATRONICS 2014","Proceedings of MECHATRONICS 2014",,,"No. OS-000671",,2014,Nov.
"Yasunori Sakai,JIANG ZHU,TOMOHISA TANAKA,Hayato Yoshioka,YOSHIO SAITO","Influence of Excitation Force on Damping of Rolling Guideway in Feed and Pitch Direction","the 16th International Machine Tool Engineers` Conference","Proceeding of the 16th International Machine Tool Engineers` Conference","Japan Machine Tool Builders' Association",,,,2014,Nov.
"Yasunori Sakai,JIANG ZHU,田中智久,Hayato Yoshioka,YOSHIO SAITO","Influence of friction in pre-rolling region on dynamic characteristics of a rolling guideway","第10回 日本機械学会生産加工・工作機械部門講演会",,,,,"pp. 97-98",2014,Nov.
"Mikiya HARA,Jiang ZHU,Tomohisa TANAKA,Yoshio SAITO","Study on Effect of Cutting Parameter on Cutting Resistance in the Milling of Polytetrafluoroethylene","２０１４年度砥粒加工学会学術講演会","２０１４年度砥粒加工学会学術講演会論文集","公益社団法人 砥粒加工学会",,,,2014,Sept.
"Jiang Zhu,Tomohisa Tanaka,Yoshio Saito","Research on 3D Model Processing Technologies in the Application of Freeform Surface Machining",,"Advanced Materials Research","Trans Tech Publications, Switzerland","Vol. 1017",,"pp. 281-286",2014,Sept.
"Nitin Sharma,Jiang Zhu,Tomohisa Tanaka,Yoshio Saito","Feature Extraction Based 3D Model Registration for Surface Finish Quality Evaluation",,"Advanced Materials Research","Trans Tech Publications, Switzerland","Vol. 1017",,"pp. 141-146",2014,Sept.
"Yuanrui Zhang,Shigenobu Nagase,Jiang Zhu,Tomohisa Tanaka,Yoshio Saito","Positioning calibration of a parallel mechanism worktable with 6-DOF",,"Key Engineering Materials","Trans Tech Publications, Switzerland","Vol. 625",,"pp. 392-397",2014,Aug.
"JIANG Zhu,AKIMITSU Hozumi,TOMOHISA Tanaka,Yoshio Saito","High Efficiency Tool Path Generation for Freeform Surface Machining Based on NURBS Subdivision",,"Key Engineering Materials","Trans Tech Publications, Switzerland","Vol. 625",,"pp. 372-377",2014,Aug.
"Yuki Koike,JIANG ZHU,TOMOHISA TANAKA,YOSHIO SAITO","LSI製造プロセスにおける搬送経路に基づくマルチクラスタシステムの効率化","2014年度精密工学会春季大会学術講演会","2014年度精密工学会春季大会学術講演会講演論文集",,,,,2014,Mar.
"Shinya Oishi,TOMOHISA TANAKA,JIANG ZHU,YOSHIO SAITO","Study on Laser Forming Mechanism of Stainless Wire","日本機械学会生産システム部門研究発表講演会2014","日本機械学会生産システム部門研究発表講演会2014講演論文集","日本機械学会",,"No. 14-8","pp. 105-106",2014,Mar.
"Yasunori Sakai,Toshiki Hanaoka,JIANG ZHU,YOSHIO SAITO,TOMOHISA TANAKA","加振力振幅が直動転がり案内の動特性に及ぼす影響","2014年度精密工学会春季大会学術講演会","2014年度精密工学会春季大会学術講演会講演論文集",,,,,2014,Mar.
"Nitin Sharma,Jiang Zhu,Tomohisa Tanaka,Yoshio Saito","3D Model Registration Based on Feature Extraction Using Segmentation","2014年度精密工学会春季大会学術講演会","2014年度精密工学会春季大会学術講演会講演論文集",,,,,2014,Mar.
"Naoki Maeda,JIANG ZHU,TOMOHISA TANAKA,YOSHIO SAITO","Fabrication of three-dimensional laminate of thin metal wire using a laser","日本機械学会生産システム部門研究発表講演会2014","日本機械学会生産システム部門研究発表講演会2014講演論文集","日本機械学会",,"No. 14-8","pp. 107-108",2014,Mar.
"Jiang ZHU,Saori MUTO,Tomohisa Tanaka,Yoshio SAITO","Development of Automatic Machining Process Deciding System Based on 3D-Model","The 7th International Conference on Leading Edge Manufacturing in 21st Century (LEM21)","Proceeding of the 7th International Conference on Leading Edge Manufacturing in 21st Century (LEM21)",,,,"pp. 123-128",2013,Nov.
"Xu Zhou,Tomohisa Tanaka,Jiang Zhu,Yoshio Saito","Titanium Coloring Mechanism through Laser Irradiation","the 5th International Conference of Asian Society for Precision Engineering and Nanotechnology","Proceeding of the 5th International Conference of Asian Society for Precision Engineering and Nanotechnology",,,,,2013,Nov.
"Tomohisa Tanaka,Shinya Oishi,Jiang Zhu,Yoshio Saito","Study on the Laser Forming of Thin Stainless-steel Wire","the 5th International Conference of Asian Society for Precision Engineering and Nanotechnology","Proceeding of the 5th International Conference of Asian Society for Precision Engineering and Nanotechnology",,,,,2013,Nov.
"Mikiya Hara,Jiang Zhu,Tomohisa Tanaka,Yoshio Saito","Study on Effect of Cutting Parameter on Surface Roughness in the Milling of Polytetrafluoroethylene","ABTEC2013砥粒加工学会学術講演会","ABTEC2013砥粒加工学会学術講演会講演論文集","砥粒加工学会",,,"pp. 214-216",2013,Aug.
"Shinya Oishi,Tomohisa Tanaka,Jiang Zhu,Yoshio Saito","Study on Laser Forming for Stainless Wire","The Japan Society of Mechanical Engineers, Manufacturing Systems Division Conference 2013","Proceeding of The Japan Society of Mechanical Engineers, Manufacturing Systems Division Conference 2013","The Japan Society of Mechanical Engineers",,"No. 13-6","pp. 69-70",2013,Mar.
"Akimitsu Hozumi,Jiang Zhu,Tomohisa Tanaka,Yoshio Saito","High Efficiency Tool Path Generation Method for NURBS Surface Machining Based on NURBS Surface Subdivision","Spring Annual Meeting of the Japan Society for Procession Engineering 2013","2013年度精密工学会春季大会学術講演会講演論文集","The Japan Society of Precision Engineering",,,"pp. 1065-1066",2013,Mar.
"Masaomi Hasegawa,Jiang Zhu,Tomohisa Tanaka,Yoshio Saito","Validation of Rough Machining Process for Multi-axis Machine Tools by Using Multi-resolution Mesh","Spring Annual Meeting of the Japan Society for Procession Engineering 2013","2013年度精密工学会春季大会学術講演会講演論文集","The Japan Society of Precision Engineering",,,"pp. 55-56",2013,Mar.
"Saori Muto,Jiang Zhu,Tomohisa Tanaka,Yoshio Saito","Development of the Automatic Machining Process Deciding System Based on 3D-model","Spring Annual Meeting of the Japan Society for Procession Engineering 2013","2013年度精密工学会春季大会学術講演会講演論文集","The Japan Society of Precision Engineering",,,"pp. 1073-1074",2013,Mar.
"Osama Abdelaal,Jiang Zhu,Tomohisa Tanaka,Saied Darwish,Yoshio Saito","Additive Manufacturing of Custom-made Hip Implants","The Japan Society of Mechanical Engineers, Manufacturing Systems Division Conference 2013","Proceeding of The Japan Society of Mechanical Engineers, Manufacturing Systems Division Conference 2013","The Japan Society of Mechanical Engineers",,"No. 13-6","pp. 91-92",2013,Mar.
"Yuanrui Zhang,Jiang Zhu,Tomohisa Tanaka,Yoshio Saito","Research on the error compensation and machining accuracy about the 6-DOF parallel mechanism table","the 15th International Machine Tool Engineers` Conference","Proceeding of the 15th International Machine Tool Engineers` Conference","Japan Machine Tool Builders` Association",,,"pp. 6-7",2012,Nov.
"Yuanrui Zhang,Jiang Zhu,Tomohisa Tanaka,Yoshio Saito","Measurement of Movement Error and Its Compensation for 6-DOF Parallel Mechanism Worktable",,"Key Egineering Materials (Emerging Technology in Precision Engineering XIV)","Trans Tech Publications Ltd","Vol. 523-524",,"pp. 463-468",2012,Nov.
"Xu Zhou,Jiang Zhu,Tomohisa Tanaka,Yoshio Saito","Research on the Structural Color Appearance of Titanium by Laser Irradiation","the 15th International Machine Tool Engineers` Conference","Proceeding of the 15th International Machine Tool Engineers` Conference",,,,"pp. 8-9",2012,Nov.
"Xu Zhou,Jiang Zhu,Tomohisa Tanaka,Yoshio Saito","Study on Coloring Mechanism of Oxide Layers on Titanium by Laser Irradiating","The 9th Manufacturing & Machine Tool Conference","Proceeding of the 9th Manufacturing & Machine Tool Conference","日本機械学会",,"No. 12-10","pp. 275-276",2012,Oct.
"Jiang Zhu,Jumpei Goto,Tomohisa Tanaka,Yoshio Saito","Tool Path Generation for Layered Manufacturing by Wire Electric Discharge Machining (WEDM)","The 9th Manufacturing & Machine Tool Conference","Proceeding of the 9th Manufacturing & Machine Tool Conference","日本機械学会",,"No. 12-10","pp. 103-104",2012,Oct.
"Shunsuke Oike,Tomohisa Tanaka,Jiang Zhu,Yoshio Saito","Robust Production Scheduling Using Autonomous Distributed Systems",,"Key Engineering Materials","Trans Tech Publications","Vol. 516",,"pp. 166-169",2012,June
"Kohei Ogura,Jiang Zhu,Tomohisa Tanaka,Yoshio Saito","Characteristics of Excimer Laser Ablation for Three Dimensional Machining of PMMA",,"Key Engineering Materials","Trans Tech Publications","Vol. 516",,"pp. 192-197",2012,June
"Yuya Iitsuka,Jiang Zhu,Tomohisa Tanaka,Yoshio Saito","Study on modeling of wire structures by laser forming","Spring Annual Meeting of the Japan Society for Procession Engineering 2012","Proceeding of Spring Annual Meeting of the Japan Society for Procession Engineering 2012","The Japan Society of Precision Engineering",,,"pp. 05-06",2012,Mar.
"Shota Sekiguchi,Jiang Zhu,Tomohisa Tanaka,Yoshio Saito","Processing System Construction for 8-axis Redundant Robot","Spring Annual Meeting of the Japan Society for Procession Engineering 2012","Proceeding of Spring Annual Meeting of the Japan Society for Procession Engineering 2012","The Japan Society of Precision Engineering",,,"pp. 675-676",2012,Mar.
"Haruka Tsukasaki,Jiang Zhu,Tomohisa Tanaka,Yoshio Saito","Study on molten laminating of the metal resin combined molding using the laser","Spring Annual Meeting of the Japan Society for Procession Engineering 2012","Proceeding of Spring Annual Meeting of the Japan Society for Procession Engineering 2012","The Japan Society of Precision Engineering",,,"pp. 15-16",2012,Mar.
"Masaomi Hasegawa,Jiang Zhu,TOMOHISA TANAKA,YOSHIO SAITO","Validation of rough machining process for turning center by using multi-resolution mesh","JSME Manufacturing Systems Division Conference 2012","Proceding of JSME Manufacturing Systems Division Conference 2012","The Japan Society of Mechanical Engineers",,"No. 12-7","pp. 29-30",2012,Mar.
"Yuanrui Zhang,Jiaotao Wu,Jiang Zhu,Tomohisa Tanaka,Yoshio Saito","Analysis of error factors in the worktable of 6-DOF parallel mechanism","Spring Annual Meeting of the Japan Society for Procession Engineering 2012","Proceeding of Spring Annual Meeting of the Japan Society for Procession Engineering 2012","The Japan Society of Precision Engineering",,,"pp. 843-844",2012,Mar.
"Xiaoyi Wang,Jing Chen,Jiang Zhu,Yoshio Saito,Tomohisa Tanaka","Registration of 3-D Shape with Free-form Surface Using Imageware and Genetic Algorithm",,"Advanced Materials Research","Trans Tech Publications","Vol. 472-475",,"pp. 317-322",2012,Feb.
"Jiang Zhu,Tomohisa Tanaka,Yoshio Saito","Tool Path Generation for 3D Freeform Surface Machining Based on the Feature of CAD Model","The 2nd IFToMM Asian Conference on Mechanism and Machine Science",,,,,,2012,
"Jiang Zhu,Yusuke Narabu,Tomohisa Tanaka,Yoshio Saito","Manufacturing Feature Extraction System of 3D-Model for Process Planning","The 6th International Conference on Leading Edge Manufacturing in 21st Century (LEM21)","Proceeding of The 6th International Conference on Leading Edge Manufacturing in 21st Century (LEM21)","The Japan Society of Mechanical Engineers (JSME)",,,,2011,Nov.
"Takahiro Kubo,Jiang Zhu,Tomohisa Tanaka,Yoshio Saito","The Contact Part Measurement on Rough Surface by Optical Methodology in High Load Region","The 6th International Conference on Leading Edge Manufacturing in 21st Century (LEM21)","Proceeding of The 6th International Conference on Leading Edge Manufacturing in 21st Century (LEM21)","The Japan Society of Mechanical Engineers (JSME)",,,,2011,Nov.
"Jiang Zhu,Tomohisa TANAKA,Yoshio SAITO,Ryuta TANABE,Masaaki TAKENAKA,Toru FUKAMI","On-machine Measuring and Machining of Freeform Surface Using a Polar-coordinate Desktop Machine Tool",,"Journal of Advanced Mechanical Design, Systems, and Manufacturing","The Japan Society of Mechanical Engineers","Vol. 5","No. 4","pp. 240-251",2011,Oct.
"Saori Muto,Jiang Zhu,Tomohisa Tanaka,Yoshio Saito","Fabrication and Evaluation of 3D Shape by Rapid Prototyping","Mechanical Engineering Congress, 2011 Japan","Mechanical Engineering Congress, 2011 Japan","The Japan Society of Mechanical Engineers",,"No. 11-1",,2011,Sept.
"Yuya Iitsuka,Jiang Zhu,Tomohisa Tanaka,Yoshio Saito","Wire Structure Forming by Laser Forming","Mechanical Engineering Congress, 2011 Japan","Mechanical Engineering Congress, 2011 Japan","The Japan Society of Mechanical Engineers",,"No. 11-1",,2011,Sept.
"Shunsuke Oike,Tomohisa Tanaka,Jiang Zhu,Yoshio Saito","Robust Production Scheduling Using Autonomous Distributed Systems","Mechanical Engineering Congress, 2011 Japan","Mechanical Engineering Congress, 2011 Japan","The Japan Society of Mechanical Engineers",,"No. 11-1",,2011,Sept.
"Shota Sekiguchi,Jiang Zhu,Tomohisa Tanaka,Yoshio Saito","Toolpath Generation for 3D Processing by 8-axis Redundant Robot System","Mechanical Engineering Congress, 2011 Japan","Mechanical Engineering Congress, 2011 Japan","The Japan Society of Mechanical Engineers",,"No. 11-1",,2011,Sept.
"Shinya Kinoshita,Jiang Zhu,Tomohisa Tanaka,Yoshio Saito","Research on Appearance of Structural Color by Laser Irradiation to Titanium","Mechanical Engineering Congress, 2011 Japan","Mechanical Engineering Congress, 2011 Japan","The Japan Society of Mechanical Engineers",,"No. 11-1",,2011,Sept.
"Taku Nishio,Jiang Zhu,Tomohisa Tanaka,Yoshio Saito","Fundamental Research to Construct the Model Made from Heterogeneous Materials by Using Laser","Mechanical Engineering Congress, 2011 Japan","Mechanical Engineering Congress, 2011 Japan","The Japan Society of Mechanical Engineers",,"No. 11-1",,2011,Sept.
"Akimitsu Hozumi,Jiang Zhu,Tomohisa Tanaka,Yoshio Saito","Development of Processing Support System for 6-axis WEDM","Mechanical Engineering Congress, 2011 Japan","Mechanical Engineering Congress, 2011 Japan","The Japan Society of Mechanical Engineers",,"No. 11-1",,2011,Sept.
"Haruka Tsukasaki,Jiang Zhu,Tomohisa Tanaka,Yoshio Saito","Development of the Support-free RP Device with 5-axis Control","Mechanical Engineering Congress, 2011 Japan","Mechanical Engineering Congress, 2011 Japan","The Japan Society of Mechanical Engineers",,"No. 11-1",,2011,Sept.
"Jiang Zhu,Yuichi Takekuma,Tomohisa Tanaka,Yoshio Saito","3D Model Registration Based on Feature Extraction",,"Advanced Materials Research","Trans Tech Publications, Switzerland","Vol. 299-300",,"pp. 1091-1094",2011,July
"Asim Al-Sofi,Yoshio Saito,Tomohisa Tanaka,Jiang Zhu","Generating the Measurement Points Based on Finishing NC Data","2011 IEEE International Conference on Mechatronics (ICM)","Proceeding of 2011 IEEE International Conference on Mechatronics (ICM)",,,,"pp. 34-38",2011,Apr.
"Jiang Zhu,Tomohisa Tanaka,Yoshio Saito,Lining Sun","Study on virtual environment-based simulation, control and teleoperation in the application of robotic machining and manipulation",,"International Journal of Design Engineering","Inderscience Enterprises Ltd.","Vol. 3","No. 3","pp. 218-231",2011,Apr.
"Kohei Ogura,TOMOHISA TANAKA,JIANG ZHU,YOSHIO SAITO","Characteristics of excimer laser ablation for three dimensional machining of PMMA","Spring Annual Meeting of the Japan Society for Procession Engineering 2011","Proceeding of Spring Annual Meeting of the Japan Society for Procession Engineering 2011","The Japan Society of Precision Engineering",,,"pp. 125-126",2011,Mar.
"Shunsuke Oike,TOMOHISA TANAKA,JIANG ZHU,YOSHIO SAITO","Robust Production Scheduling Using Autonomous Distributed Systems","JSME Manufacturing Systems Division Conference 2011","Proceding of JSME Manufacturing Systems Division Conference 2011","The Japan Society of Mechanical Engineers",,"No. 11-7","pp. 85-86",2011,Mar.
"Jiang Zhu,Akira Yanagisawa,Tomohisa Tanaka,Yoshio Saito","Development of Tool Path Generation System for Polar-coordinate Desktop Machine Tool(PDMT)","The 6th International Conference on MicroManufacturing ICOMM/2011","Proceeding of the 6th International Conference on MicroManufacturing ICOMM/2011","Tokyo Denki University",,,"pp. 149-156",2011,Mar.
"Takahiro Kubo,JIANG ZHU,TOMOHISA TANAKA,YOSHIO SAITO","High load wear-out evaluation of characteristics by direct contact point observation in rough contact area","Spring Annual Meeting of the Japan Society for Procession Engineering 2011","Proceeding of Spring Annual Meeting of the Japan Society for Procession Engineering 2011","The Japan Society of Precision Engineering",,,"pp. 759-760",2011,Mar.
"Yuichi Takekuma,JIANG ZHU,TOMOHISA TANAKA,YOSHIO SAITO","Construction of shape inspection system by comparing three-dimensional models","Spring Annual Meeting of the Japan Society for Procession Engineering 2011","Proceeding of Spring Annual Meeting of the Japan Society for Procession Engineering 2011","The Japan Society of Precision Engineering",,,"pp. 665-666",2011,Mar.
"Yusuke Narabu,JIANG ZHU,TOMOHISA TANAKA,YOSHIO SAITO","Development of the automatic machining method deciding system based on 3D-model","Spring Annual Meeting of the Japan Society for Procession Engineering 2011","Proceeding of Spring Annual Meeting of the Japan Society for Procession Engineering 2011","The Japan Society of Precision Engineering",,,"pp. 577-578",2011,Mar.
"Jiang Zhu,Keisuke Nomura,Tomohisa Tanaka,Yoshio Saito","Rough Machining Tool Path Generation for Multi-axis Turning Center Based on Multi-resolution Mesh","The 14th International Conference on Mechatronics Technology","Proceeding of the 14th International Conference on Mechatronics Technology",,,,"pp. 12-16",2010,Nov.
"Kengo Shintaku,JIANG ZHU,TOMOHISA TANAKA,YOSHIO SAITO","Accuracy Maintenance Using the Measured Data of Already Processed Part After Workpiece Position is Changed","生産と加工に関する学術講演会2010","Proceeding of the 8th Manufacturing & Machine Tool Conference","社団法人 日本機械学会",,"No. 10-11","pp. 243-244",2010,Oct.
"Shota Sekiguchi,JIANG ZHU,TOMOHISA TANAKA,YOSHIO SAITO","Freeform Surface Machining and Measurement by 8-axis Robot System","The 14th International Machine Tool Engineers' Conference","Proceedings of the 14th International Machine Tool Egineers' Conference","Japan Machine Tool Builders' Association",,,"pp. 80-81",2010,Oct.
"Tomohisa Tanaka,Ryo Suzuki,Jiang Zhu,Yoshio Saito","Excimer Laser 3D Machining Based on Irradiation Pulse Number Control",,"Journal of Advanced Mechanical Design, Systems, and Manufacturing","The Japan Society of Mechanical Engineers","Vol. 4","No. 5","pp. 1033-1043",2010,Sept.
"Koji Nishiyama,JIANG ZHU,TOMOHISA TANAKA,YOSHIO SAITO","Tool Path Generation for 2.5-Axis Contour Machining","Autumn Annual Meeting of the Japan Society for Procession Engineering 2010","Proceeding of Autumn Annual Meeting of the Japan Society for Procession Engineering 2010","The Japan Society of Precision Engineering",,,"pp. 403-404",2010,Sept.
"Takahiro Kubo,JIANG ZHU,TOMOHISA TANAKA,YOSHIO SAITO","Plastic Deformation State Distinction in Rough Contact Surface Under Heavy Load Condition","Abrasive Technoloogy Conference 2010","Proceeding of Abrasive Technoloogy Conference 2010","The Japan Society for Abrasive Technology",,,"pp. 179-180",2010,Aug.
"Yuusuke Narabu,JIANG ZHU,TOMOHISA TANAKA,YOSHIO SAITO","Automatic Manufacturing Feature Extraction of CAD Models for Machining",,"Key Engineering Materials","Trans Tech Publications","Vol. 447-448",,"pp. 287-291",2010,July
"TOMOHISA TANAKA,Masahiro Komori,JIANG ZHU,YOSHIO SAITO","Development of Flexible Worktable for Endmilling Based on Parallel Mechanism",,"Key Engineering Materials","Trans Tech Publications","Vol. 447-448",,"pp. 826-830",2010,July
"JIANG ZHU,Keisuke Nomura,TOMOHISA TANAKA,YOSHIO SAITO","Tool Path Planning Assist System for Freeform Surface Machining",,"Key Engineering Materials","Trans Tech Publications","Vol. 447-448",,"pp. 321-325",2010,July
"Keisuke Nomura,JIANG ZHU,TOMOHISA TANAKA,YOSHIO SAITO","High-efficiency Processing for Turning Center by Using Multi-resolution Mesh","Spring Annual Meeting of the Japan Society for Procession Engineering 2010","Proceeding of Spring Annual Meeting of the Japan Society for Procession Engineering 2010","The Japan Society of Precision Engineering",,,"pp. 1037-1038",2010,Mar.
"Masahiro Komori,JIANG ZHU,TOMOHISA TANAKA,YOSHIO SAITO","Development of Work Table System with 6-DOF Parallel Mechanism for Machine Tools","Spring Annual Meeting of the Japan Society for Procession Engineering 2010","Proceeding of Spring Annual Meeting of the Japan Society for Procession Engineering 2010","The Japan Society of Precision Engineering",,,"pp. 1039-1040",2010,Mar.
"Yuusuke Narabu,JIANG ZHU,TOMOHISA TANAKA,YOSHIO SAITO","Automatic Manufacturing Feature Extraction of CAD Models for Machining","日本機械学会北陸信越支部第47期総会・講演会","日本機械学会北陸信越支部第47期総会・講演会講演論文集","社団法人日本機械学会北陸信越支部",,"No. 107-1","pp. 409-410",2010,Mar.
"Xiaoyi Wang,Quanxian Wang,Yoshio Saito,Jiang Zhu,Tomohisa Tanaka","Reorganizable Assembly Model and Its Reorganizing Approach for Assembly Planning","the 5th International Conference on Leading Edge Manufacturing in 21st Century (LEM21)","Proceedings of the 5th International Conference on Leading Edge Manufacturing in 21st Century (LEM21)","The Japan Society of Mechanical Engineers (JSME)",,"No. 09-207","pp. 21-26",2009,Dec.
"Jiang Zhu,Ryota Tanabe,Tomohisa Tanaka,Yoshio Saito","Polar-coordinate Desktop Machine Tool, an Intelligent Digital 3D Duplicator","the 5th International Conference on Leading Edge Manufacturing in 21st Century (LEM21)","Proceedings of the 5th International Conference on Leading Edge Manufacturing in 21st Century (LEM21)","The Japan Society of Mechanical Engineers (JSME)",,"No. 09-207","pp. 133-138",2009,Dec.
"Zuanshi Haranud,Jiang Zhu,Tomohisa Tanaka,Yoshio Saito","Optimal Tool Path Generation Method for Freeform Surface Machining","the 5th International Conference on Leading Edge Manufacturing in 21st Century (LEM21)","Proceedings of the 5th International Conference on Leading Edge Manufacturing in 21st Century (LEM21)","The Japan Society of Mechanical Engineers (JSME)",,"No. 09-207","pp. 3-8",2009,Dec.
"Ryo Suzuki,Jiang Zhu,Tomohisa Tanaka,Yoshio Saito","Excimer Laser 3D Machining Based on Irradiation Pulse Number Control","the 5th International Conference on Leading Edge Manufacturing in 21st Century (LEM21)","Proceedings of the 5th International Conference on Leading Edge Manufacturing in 21st Century (LEM21)","The Japan Society of Mechanical Engineers (JSME)",,"No. 09-207","pp. 581-584",2009,Dec.
"Yusuke Narabu,Zuanshi Haranud,Jiang Zhu,Tomohisa Tanaka,Yoshio Saito","Optimal Tool-path Selection for Milling Free-form Surface Based on the Form of Surface","3rd International Conference of Asian Society for Precision Engineering and Nanotechnology","Proceeding of 3rd International Conference of Asian Society for Precision Engineering and Nanotechnology",,,"  CD Proceeding","  1A1-13",2009,Nov.
"Masahiro Komori,Jiang Zhu,Tomohisa Tanaka,Yoshio Saito","Development of Work Table System with 6-DOF Parallel Mechanism for Machine Tools","3rd International Conference of Asian Society for Precision Engineering and Nanotechnology","Proceeding of 3rd International Conference of Asian Society for Precision Engineering and Nanotechnology",,,"  CD Proceeding","  2A1-4",2009,Nov.
"Yuichi Takekuma,Jiang Zhu,Tomohisa Tanaka,Yoshio Saito","Study on Mold Casting of Ceramics","Autumn Annual Meeting of the Japan Society for Procession Engineering 2009","Proceeding of Autumn Annual Meeting of the Japan Society for Procession Engineering 2009","The Japan Society for Procession Engineering",,,"pp. 367-368",2009,Sept.
"Masahiro Komori,Yoshio Saito,Tomohisa Tanaka,Jiang Zhu","Development of Work Table with 6-DOF Parallel Mechanism for Machine Tools","Abrasive Technoloogy Conference 2009","Abrasive Technoloogy Conference 2009","The Japan Society for Abrasive Technology",,,"pp. 167‐168",2009,Sept.
"Xiaoyi Wang,Jiang Zhu,Tomohisa Tanaka,Yoshio Saito","A New Assembly Model Capable of Reorganizing Assembly Structure","Autumn Annual Meeting of the Japan Society for Procession Engineering 2009","Proceeding of Autumn Annual Meeting of the Japan Society for Procession Engineering 2009","The Japan Society for Procession Engineering",,,"pp. 523‐524",2009,Sept.
"Yusuke Narabu,Zuanshi Haranud,Jiang Zhu,Tomohisa Tanaka,Yoshio Saito","Optimal Tool-path Selection for Milling Free-form Surface Based on the Form of Surface","Mechanical Engineering Congress 2009","Proceeding of Mechanical Engineering Congress 2009","The Japan Society of Mechanical Engineers","Vol. 4","No. 09-1","pp. 281-282",2009,Sept.
"Jun Suzuki,Jiang Zhu,Tomohisa Tanaka,Yoshio Saito","Compact Machine Tool with Working Space in Shell","Mechanical Engineering Congress 2009","Proceeding of Mechanical Engineering Congress 2009","The Japan Society of Mechanical Engineers","Vol. 4","No. 09-1","pp. 233-234",2009,Sept.
"Takahiro Kubo,Jiang Zhu,Tomohisa Tanaka,Yoshio Saito","Study on the accuracy improvement of real contact part distinction for the rough surface","Autumn Annual Meeting of the Japan Society for Procession Engineering 2009","Proceeding of Autumn Annual Meeting of the Japan Society for Procession Engineering 2009","The Japan Society for Procession Engineering",,,"pp. 733-734",2009,Sept.
"Masataka Tanase,Jiang Zhu,Tomohisa Tanaka,Yoshio Saito","Non-contact 3-D Measurement Path Generation for Multi-axis Robot System","2009 Spring Annual Meeting of the Japan Society for Procession Engineering","Proceeding of 2009 Spring Annual Meeting of the Japan Society for Procession Engineering","the Japan Society for Procession Engineering",,,"pp. 491-192",2009,Mar.
"Ryo Suzuki,Jiang Zhu,Tomohisa Tanaka,Yoshio Saito","Free-form Surface Machining of Polymeric Material Based on Laser Ablation with Irradiation Pulse Number Control","2009 Spring Annual Meeting of the Japan Society for Procession Engineering","Proceeding of 2009 Spring Annual Meeting of the Japan Society for Procession Engineering","the Japan Society for Procession Engineering",,,"pp. 931-932",2009,Mar.
"Ryota Tanabe,Jiang Zhu,Tomohisa Tanaka,Yoshio Saito","Measurement and machining of 3D shape by using polar coordiante desktop machine tool","2009 Spring Annual Meeting of the Japan Society for Procession Engineering","Proceeding of 2009 Spring Annual Meeting of the Japan Society for Procession Engineering","the Japan Society for Procession Engineering",,,"pp. 519-520",2009,Mar.
"Fei Feng,JIANG ZHU,TOMOHISA TANAKA,YOSHIO SAITO","Tool path generation for the 3D model`s machining by multi-axis processing system","JSME Manufacturing Systems Division Conference 2009","Proceeding of JSME Manufacturing Systems Division Conference 2009","The Japan Society of Mechanical Engineers",,"No. 09-5","pp. 19-20",2009,Mar.
"Ryuta Tanabe,Jiang Zhu,Tomohisa Tanaka,Yoshio Saito","Measurement and machining using polar coordiante desktop machine tool","the 13th International Machine Tool Engineers' Conference","Proceedings of the 13th International Machine Tool Engineers' Conference","Japan Machine Tool Builders' Association",,,"pp. 72-73",2008,Nov.
"Masataka Tanase,Jiang Zhu,Tomohisa Tanaka,Yoshio Saito","Freeform surface sculpturing and measurement system based on 8-axis robot system","the 13th International Machine Tool Engineers' Conference","Proceedings of the 13th International Machine Tool Engineers' Conference","Japan Machine Tool Builders' Association",,,"pp. 70-71",2008,Nov.
"JIANG ZHU,Zuanshi Haranud,TOMOHISA TANAKA,YOSHIO SAITO","Study on Feature Area Extraction for Freeform Surface Based on Mesh Simplification","the 7th Manufacturing & Machine Tool Conference","Proceeding of the 7th Manufacturing & Machine Tool Conference","The Japan Society of Mechanical Engineers",,"No. 08-19","pp. 263-264",2008,Nov.
"JIANG ZHU,TOMOHISA TANAKA,YOSHIO SAITO,Lining Sun","Study on the Virtual Reality Based Interface for Robot Integrated Machining and Manipulation","13th Internation Conference on Machine Design and Production","Proceeding of the 13th Internation Conference on Machine Design and Production",,,,"pp. 171-186",2008,Sept.
"Ryuta Tanabe,Jiang Zhu,Tomohisa Tanaka,Yoshio Saito","Machining Using Polar Coordinate Desktop Machine Tool","Autumn Annual Meeting of the Japan Society for Procession Engineering","Proceeding of Autumn Annual Meeting of the Japan Society for Procession Engineering","the Japan Society for Procession Engineering",,,"pp. 137-138",2008,Sept.
"Masataka Tanase,Jiang Zhu,Tomohisa Tanaka,Yoshio Saito","Non-contact Three Dimensional Measurement Using Multi-axis Robot System","Autumn Annual Meeting of the Japan Society for Procession Engineering","Proceeding of Autumn Annual Meeting of the Japan Society for Procession Engineering","the Japan Society for Procession Engineering",,,"pp. 241-242",2008,Sept.
"Keisuke Nomura,Jiang Zhu,Tomohisa Tanaka,Yoshio Saito","Research of Improvement of 8-axis Processing System","Mechanical Engineering Congress, 2008 Japan (MECJ-08)","Mechanical Engineering Congress, 2008 Japan (MECJ-08)","The Japan Society of Mechanical Engineers","Vol. 4","No. 08-1","pp. 255-256",2008,Aug.
"JIANG ZHU,Ryo Suzuki,TOMOHISA TANAKA,YOSHIO SAITO","Automatic Tool Path Generation for Robot Integrated Surface Sculpturing System",,"Journal of Advanced Mechanical Design, Systems, and Manufacturing","The Japan Society of Mechanical Engineers","Vol. 2","No. 4","pp. 812-823",2008,Aug.
"Zuanshi Haranud,JIANG ZHU,TOMOHISA TANAKA,YOSHIO SAITO","Study on Freeform Surface Tool Path Generation Method","JSME Manufacturing System Division Conference 2008","Proceeding of JSME Manufacturing System Division Conference 2008","The Japan Cociety of Mechanical Engineers",,"No. 08-13","pp. 59-60",2008,July
"JIANG ZHU,TOMOHISA TANAKA,YOSHIO SAITO","Rough Machining Model Generation for Freeform Surface Machining","JSME Manufacturing System Division Conference 2008","Proceeding of JSME Manufacturing System Division Conference 2008","The Japan Cociety of Mechanical Engineers",,"No. 08-13","pp. 57-58",2008,July
"Ryo Suzuki,Jiang Zhu,Tomohisa Tanaka,Yoshio Saito","8-axis Surface Sculpturing System by Heated Cutting Tools","ICCES’08(International Conference on Computational & Experimental Engineering and Science)","Proceeding of ICCES’08(International Conference on Computational & Experimental Engineering and Science)",,,,"pp. 1484-1484",2008,Mar.
"Jiang Zhu,Ryo Suzuki,Tomohisa Tanaka,Yoshio Saito","Automatic Tool Path Generation for Robot Integrated Surface Sculpturing System","The 4th International Conference on Leading Edge Manufacturing in 21st Century, LEM21","Proceeding of The 4th International Conference on Leading Edge Manufacturing in 21st Century, LEM21",,,,"pp. 125-130",2007,Nov.
"Jiang Zhu,Tomohisa Tanaka,Yoshio Saito","A 3D rough-cut model generation algorithm based on multi-resolution mesh for sculptured surface machining",,"Journal of Advanced Mechanical Design, Systems, and Manufacturing",,"Vol. 1","No. 5","pp. 628-639",2007,Nov.
"Jiang Zhu","Research on multi-resolution mesh and its application in freeform surface machining",,,,,,,2007,Sept.
"Jiang Zhu","多分解能メッシュとその自由曲面加工への適用に関する研究",,,,,,,2007,Sept.
"Jiang Zhu,Ryo Suzuki,Tomohisa Tanaka,Yoshio Saito","A Surface Sculpturing System Based on 8-Axis Robot","International Conference on Advanced Design & Manufacturing, ICADM-2007","Proceeding of International Conference on Advanced Design & Manufacturing, ICADM-2007",,,,"pp. 421-427",2007,Aug.
"Jiang Zhu,Nafis Ahamad,Hideichi Nakamoto,Noboto Matsuhira","Developing the map building ability for home robot ApriAttendaTM","3rd Tokyo Tech-KAIST Joint Workshop for Mechanical Engineering Students in Tokyo","Proceeding of 3rd Tokyo Tech-KAIST Joint Workshop for Mechanical Engineering Students in Tokyo",,,,"pp. 101-102",2007,Feb.
"Jiang Zhu,Tomohisa Tanaka,Yoshio Saito","Multi-resolution mesh for sculptured surface machining",,"Journal of Solid Mechanics and Materials Engineering",,"Vol. 1","No. 1","pp. 69-80",2007,Jan.
"Jiang Zhu,Nafis Ahamad,Hideichi Nakamoto,Noboto Matsuhira","Feature map building based on shape similarity for home robot ApriAttendaTM","IEEE International Conference on Robotics and Biomimetics (ROBIO2006)","Proceeding of IEEE International Conference on Robotics and Biomimetics (ROBIO2006)",,,,"pp. 1030-1035",2006,Dec.
"Jiang Zhu,Tomohisa Tanaka,Yoshio Saito","8-axis robot integrated surface sculpturing system","New Technologies of Machine Tool and Manufacturing, Joint Event of the 12th International Machine Tool Engineers Conference","New Technologies of Machine Tool and Manufacturing, Joint Event of the 12th International Machine Tool Engineers Conference",,,,"pp. 40-41",2006,Nov.
"Nafis Ahamad,Jiang Zhu,Hideichi Nakamoto,Noboto Matsuhira","Self-localization of home robot ApriAttendaTM based on Monte Carlo approach","International Symposium on Practical Cognitive Agents & Robots",,,,,"pp. 212-220",2006,Nov.
"Jiang Zhu,Tomohisa Tanaka,Yoshio Saito","Rough machining process and its simulation for robot integraged surface sculpturing system","the 4th IASTED International Conference on Circuits, Signals, and Systems","Prpceeding of the 4th IASTED International Conference on Circuits, Signals, and Systems",,,,"pp. 368-373",2006,Nov.
"Jiang Zhu,Ryoko Tanaka,Tomohisa Tanaka,Yoshio Saito","An 8-axis robot based rough cutting system for surface sculpturing","11th International Conference on Precision Engineering (11th ICPE)","Towards Synthesis of Micro-/Nano-systems","Springer",,,"pp. 139-144",2006,Aug.
"Jiang Zhu,Nafis Ahamad,Hideichi Nakamoto,Noboto Matsuhira","Map building and localization of home robot using feature matching and montecarlo approach","2006 JSME Conference on Robotics and Mechatronics (ROBOMEC2006)",,,,,"  CD Proceeding",2006,May
"Jiang Zhu,Tomohisa Tanaka,Yoshio Saito","3D mesh simplification for freeform surfacing","Tehran International Congress on Manufacturing Engineering (TICME2005)",,,,,"  CD Proceeding",2005,Dec.
"L. N. Sun,F. S. Tan,W. B. Rong,Jiang Zhu","Collosion detection approach in virtual environment of micromanipulation robot",,"High Technology Letter",,"Vol. 11","No. 4","pp. 371-376",2005,Dec.
"Jiang Zhu,Tomohisa Tanaka,Yoshio Saito","A new mesh simplification algorithm for the application of surface sculpturing","The First JTU-TIT Joint Workshop on Creative Engineering-Mechanics, Control and Advanced Robotics","Proceeding of The First JTU-TIT Joint Workshop on Creative Engineering-Mechanics, Control and Advanced Robotics",,,,"  CD Proceeding",2005,Sept.
"L. N. Sun,F. S. Tan,W. B. Rong,Jiang Zhu","Modeling of micromanipulation robot in virtual environment",,"ACTA Metallurgica Sinca (English Letter)",,"Vol. 17","No. 2","pp. 194-198",2004,Apr.
"L. N. Sun,F. S. Tan,W. B. Rong,Jiang Zhu","A collision response method in virtual environment of peg-in-hole microassembly",,"Proceedings of the World Congress on Intelligent Control and Automation (WCICA)",,"Vol. 4",,"pp. 3210-3213",2004,
"L. N. Sun,F. S. Tan,W. B. Rong,Jiang Zhu","Research on the architecture of virtual reality based on micromanipulation robot","2003 IEEE International Conference on Robotics, Intelligent Systems and Signal Processing","Proceeding of 2003 IEEE International Conference on Robotics, Intelligent Systems and Signal Processing",,,,"pp. 960-964",2003,Oct.