"Seweon Choi,Yumi Kim,Kyungmin Lee,Sungkil Hong,Youungchan  Kim,SHINJI KUMAI","The effects of cooling rate and heat treatment on mechanical and thermal characteristics of Al-Si-Cu-Mg foundry alloys",,"Journal of Alloys and Compounds",,"Vol. 617",,"pp. 654-659",2014,Dec.
"田中裕太郎,原田陽平,熊井真次","縦型高速双ロールキャストした3003アルミニウム合金の再結晶挙動と力学的特性","（一社）軽金属学会 第127回秋期大会","軽金属学会第127回秋期大会講演概要",,,,"pp. 291-292",2014,Nov.
"相澤祐輔,西脇淳人,原田陽平,熊井真次","実験ならびにシミュレーションによるAl/Fe爆発圧接と接合界面組織の解析","（一社）軽金属学会 第127回秋期大会","軽金属学会第127回秋期大会講演概要",,,,"pp. 349-350",2014,Nov.
"?山雄介,原田陽平,熊井真次","タンデム式縦型高速双ロールキャスト法により作製したAl-Mn/Al-Si合金クラッド材の皮材凝固組織と界面接合状態の関係","（公社）日本鋳造工学会 第165回全国講演大会","講演概要集",,,,"p. 33",2014,Oct.
"中村亮司,筒井あかり,羽賀俊雄,原田陽平,熊井真次,寺山和子,新倉昭男","タンデム式縦型高速双ロールキャスト法で作製した4045/3003/4045アルミニウム合金クラッド材の組織と機械的性質",,"軽金属",,"Vol. 64","No. 9","pp. 399-406",2014,Sept.
"Y. Harada,K. Ishizuka,S. Kumai","Effect of coating layer on advanced stud welding of 2024 aluminum alloy to galvanized and galvannealed steel sheet","ICAA14 (The 14th International Conference on Aluminum Alloys)","Materials Science Forum",,"Vol. 794-796",,"pp. 351-356",2014,June
"J. Nishiwaki,Y. Sawa,Y. Harada,S. Kumai","SPH analysis on formation manner of wavy joint interface in impact welded Al/Cu dissimilar metal plates","ICAA14 (The 14th International Conference on Aluminum Alloys)","Materials Science Forum",,"Vol. 794-796",,"pp. 383-388",2014,June
"SHINJI KUMAI","Dissimilar-metal joining using several types of high-speed splid-state welding methods",,"Materials Science Forum",,"Vol. 794-796",,"pp. 357-364",2014,June
"L. Gao,Y. Harada,S. Kumai","Visualization of micro-segregations in A356 aluminum alloy by a color etching method","ICAA14 (The 14th International Conference on Aluminum Alloys)","Materials Science Forum",,"Vol. 794-796",,"pp. 9-14",2014,June
"山本裕晃,原田陽平,熊井真次","縦型高速双ロールキャスト法により作製したA356合金板材の表面状態に及ぼす鋳造条件ならびに凝固組織の影響","（公社）日本鋳造工学会 第164回全国講演大会","講演概要集",,,,"p. 107",2014,May
"西脇淳人,相澤祐輔,原田陽平,熊井真次","爆発圧接したAl/Cu接合材の波状界面形成挙動の数値解析","（一社）軽金属学会 第126回春期大会","軽金属学会第126回春期大会講演概要",,,,"p. 195",2014,May
"山田洋希,原田陽平,熊井真次","高速固相接合したSS400スタッドと5052アルミニウム合金板の接合強度と界面組織","（一社）軽金属学会 第126回春期大会","講演概要集",,,,"p. 199",2014,May
"?山雄介,中村亮司,原田陽平,熊井真次","タンデム式縦型高速双ロールキャスト法により作製したAl-Mn/Al-Si合金クラッド材の界面組織に及ぼすSi組成の影響","（公社）日本鋳造工学会 第164回全国講演大会","講演概要集",,,,"p. 108",2014,May
"西脇淳人,原田陽平,熊井真次","Cu/Ni電磁圧接材の波状接合界面形成挙動のSPH法による数値解析","（公社）日本金属学会2014年春期講演大会（第154回）","講演概要CD",,,,"p. 469",2014,Mar.
"Li Gao,Yohei Harada,SHINJI KUMAI","A color etching method applied to characterize the solute segregation in spheroidal primary phase of semi-solid processed A356 aluminum alloy","（公社）日本金属学会2014年春期講演大会（第154回）","講演概要CD",,,,"p. 314",2014,Mar.
"筒井あかり,中村亮司,原田陽平,熊井真次,羽賀俊雄,寺山和子,新倉昭男","タンデム式縦型高速双ロールキャスト法と熱間圧延接合法で作製した4045/3003/4045アルミニウム合金クラッド材のミクロ組織と機械的性質","（公社）日本金属学会2014年春期講演大会（第154回）","講演概要CD",,,,"p. 316",2014,Mar.
"L. Gao,Y. Harada,S. Kumai","Visualization of solute distributions in dendritic and spheroidized Al grains characterized by both color etching method and electron probe microanalysis",,"Journal of Materials Science",,"Vol. 49","No. 3","pp. 1286-1296",2014,Feb.
"中村亮司,田中裕一,羽賀俊雄,原田陽平,熊井真次","タンデム式縦型双ロールキャスト法で作製したA4045/A3003/A4045合金クラッド材の接合界面組織",,"鋳造工学",,"Vol. 86","No. 3","pp. 223-228",2014,
"Haga, T.,Tsuge, H.,Ishihara, T.,SHINJI KUMAI,Watari, H.","A vertical type tandem twin roll caster for clad strip equipped with a scraper",,"Key Engineering Materials",,"Vol. 611-612",,"pp. 623-628",2014,
"熊井真次,金 民錫","縦型高速双ロールキャストしたアルミニウム合金板材の内部割れとその対策",,"鋳造工学 全国講演大会講演概要集","公益社団法人 日本鋳造工学会","Vol. 164",,"pp. 102-102",2014,
"Y. Harada,Y. Sada,S. Kumai","Dissimilar joining of AA2024 aluminum studs and AZ80 magnesium plates by high-speed solid-state welding",,"Journal of Materials Processing Technology",,"Vol. 214",,"pp. 477-484",2014,