"大西有希","硬化収縮と熱変形に起因するUVインプリント転写誤差の数値シミュレーション","第46回ポリマー光部品(POC)研究会",,,,,,2021,Nov.
"大西有希","放射状メッシュ再分割を用いた10節点四面体平滑化有限要素法の動的大変形性能評価","第34回計算力学講演会",,,,,,2021,Sept.
"辻井雅人,武井寿郎,和田晋一,谷中雅顕,米倉勲,大西有希","多層フィルムT形剥離における剥離角度依存現象の有限要素解析","日本印刷学会第145回研究発表会",,,,,,2021,July
"Yuki ONISHI","Explicit Dynamic Analysis using SelectiveCS-FEM-T10 with Radial Element Subdivision","The 12th International Conference on Computational Methods (ICCM2021)",,,,,,2021,July
"Yuki ONISHI","Modal and Dynamic Explicit Analyses with the Latest Tetrahedral Smoothed Finite Element Method","IUTAM Symposium on Computational methods for large-scale and complex wave problems",,,,,,2021,July
"Yuki Onishi,Ryunosuke Yamashita,Kenji Amaya,Yoshihiko Hirai","Resin Deformation Analysis in UV Imprint Considering UV Shrinkage, Thermal Deformation, and Thermochemical Kinetics","The 38th International Conference of Photopolymer Science and Technology (ICPST-38)",,,,,,2021,June
"大西有希,山下龍之介,天谷賢治,平井義彦","反応速度論に基づくUV硬化収縮と熱変形を考慮したUVインプリントの形状変形解析","第26回計算工学講演会",,,,,,2021,May
"大西有希","微圧縮大変形のための四面体平滑化有限要素法の現状","第41回ゴムの力学研究分科会",,,,,,2021,Jan.
"Yuki Onishi,Ryunosuke Yamashita,Kenji Amaya,Yoshihiko Hirai","Numerical analysis of pattern shape deformation in UV imprint considering thermal deformation with UV shrinkage and curing",,"Journal of Vacuum Science & Technology B",,,,,2021,
"Yuki Onishi","Selective Cell-based Smoothed Finite Element Method using 10-node Tetrahedral Element with Radial Element Subdivision",,"International Journal of Computational Methods",,,,,2021,
"大西有希","10節点四面体の放射状メッシュ再分割を用いた平滑化有限要素法","計力スクエア(CMD2020)",,,,,,2020,Dec.
"Yuki Onishi","Accurate electrodeposition simulation of automobile bodies with edge-based smoothed finite element method using 4-node tetrahedral meshes","The 3rd International Conference on Computational Engineering and Science for Safety and Environmental Problems (COMPSAFE2020)",,,,,,2020,Dec.
"Yuki Onishi","SelectiveCS-FEM-T10 with Radial-type Mesh Subdivision","The 11th International Conference on Computational Methods (e-ICCM2020)",,,,,,2020,Aug.
"大西有希,山下龍之介,天谷賢治,平井義彦","UVインプリントにおける硬化収縮によるパターン形状変形の数値解析","第25回計算工学講演会","第25回計算工学講演会論文集",,,,,2020,June
"辻井雅人,武井寿郎,和田晋一,谷中雅顕,米倉勲,大西有希","結合力モデルを用いた多層フィルムT形剥離における剥離角度依存現象の有限要素解析","第25回計算工学講演会","第25回計算工学講演会論文集",,,,,2020,June
"Yuki Onishi,Ryunosuke Yamashita,Kenji Amaya,Yoshihiko Hirai","Numerical Analysis of Pattern Shape Deformation in UV Imprint Due to Curing Shrinkage",,"Journal of Photopolymer Science and Technology",,"Vol. 33","No. 2","pp. 245--250",2020,May
"Yuki ONISHI","A Concept of Cell-based Smoothed Finite Element Method using 10-node Tetrahedral Elements (CS-FEM-T10) for Large Deformation Problems of Nearly Incompressible Solids",,"International Journal of Computational Methods",,"Vol. 17","No. 2",,2020,Feb.
"Roshani Perera,Haruo Isoda,Kenta Ishiguro,Takashi Mizuno,Yasuo Takehara,Masaki Terada,Chiharu Tanoi,Takehiro Naito,Harumi Sakahara,Hisaya Hiramatsu,Hiroki Namba,Takashi Izumi,Toshihiko Wakabayashi,Takafumi Kosugi,Yuki Onishi,Marcus Alley,Yoshiaki Komori,Mitsuru Ikeda,Shinji Naganawa","Assessing the Risk of Intracranial Aneurysm Rupture Using Morphological and Hemodynamic Biomarkers Evaluated from Magnetic Resonance Fluid Dynamics and Computational Fluid Dynamics",,"Magnetic Resonance in Medical Sciences",,,,,2020,Jan.
"応用物理学会,ナノインプリント技術研究会編,大西有希","ナノインプリント技術ハンドブック",,,"オーム社",,,,2019,Dec.
"Kai KITAMURA,Yuki ONISHI,Takeshi KASHIYAMA,Kenji AMAYA","Performance Evaluation of Edge-Based Smoothed Finite Element Methodfor 4-node Tetrahedral Mesheson Electrodeposition Simulation","The 7th Asian Pacific Congress on Computational Mechanics (APCOM2019)",,,,,,2019,Dec.
"Yuki ONISHI","SelectiveCS-FEM-T10: Selective cell-based smoothed finite element methods with 10-node tetrahedral elements","The 7th Asian Pacific Congress on Computational Mechanics (APCOM2019)",,,,,,2019,Dec.
"北村海,大西有希,樫山武士,天谷賢治","実ラインの電着条件を模した基礎実験に基づく高精度自動車電着塗装シミュレーション",,"日本計算工学会論文集",,"Vol. 2019","No. 20190014",,2019,Nov.
"Tsubasa Ishii,Kenji Amaya,Yuki Onishi","Model Identification for Adsorption Dynamics and Suppression effect of Polyethylene Glycol using Inverse Analysis Approach","236th ECS meeting","ECS Transactions",,"Vol. 92","No. 5","pp. 17-28",2019,Oct.
"Yuki Onishi,Ryunosuke Yamashita,Kenji Amaya,Yoshihiko Hirai","Numerical modeling method for UV imprint process simulation using thermoviscoelastic constitutive equations",,"Journal of Vacuum Science & Technology B",,"Vol. 37","No. 6",,2019,Oct.
"樫山武士,大西有希,北村海,天谷賢治","高精度電着塗装膜厚シミュレーションの開発と実車モデルへの適用",,"自動車技術会論文集",,"Vol. 50","No. 5","pp. 1481-1486",2019,Sept.
"大西有希","担当体積に平滑化を施した10節点四面体平滑化有限要素による微圧縮大変形解析","第32回計算力学講演会",,,,,,2019,Sept.
"R. Yamashita,Y. Onishi,K. Amaya,Y. Hirai","A Validation of UV Imprint Process Simulation using a Thermo-viscoelastic Constitutive Model","The 45th Micro & Nano Engineering Conference (MNE2019)",,,,,,2019,Sept.
"Kai KITAMURA,Yuki ONISHI,Takeshi KASHIYAMA,Kenji AMAYA","Performance Evaluation of edge-based smoothed finite element method for 4-node tetrahedral meshes on Electrodeposition Simulation","The 10th International Conference on Computational Methods (ICCM2019)",,,,,,2019,July
"石井翼,天谷賢治,大西有希","試料濃度をプログラム可能な電気化学フローセルシステムの開発",,"表面技術",,"Vol. 70","No. 7","pp. 364-368",2019,July
"Yuki ONISHI","Smoothed Finite Element Methods: Recent Academic/Practical Progress","Thematic Plenary Lecture at The 10th International Conference on Computational Methods (ICCM2019)",,,,,,2019,July
"Yuki ONISHI","An optimal multiple smoothing scheme of selective cell-based smoothed finite element methods with 10-node tetrahedral elements for large deformation of nearly incompressible solids","The 10th International Conference on Computational Methods (ICCM2019)",,,,,,2019,July
"樫山武士,大西有希,北村海,天谷賢治","高精度電着塗装膜厚シミュレーションの開発と実車モデルへの適用","自動車技術会2019年春季大会学術講演会",,,,,,2019,May
"大西有希","10節点四面体セルベース平滑化有限要素(CS-FEM-T10)の性能評価","第24回 計算工学講演会",,,,,,2019,May
"北村海,大西有希,樫山武士,天谷賢治","高精度電着塗装シミュレーションの実ライン自動車ボディへの適用","第24回 計算工学講演会",,,,,,2019,May
"石井翼,天谷賢治,大西","硫酸銅水溶液における数値計算を援用した分極曲線の同定","第139回講演大会",,,,,,2019,Mar.
"渡辺謙太,砂川弘樹,山下龍之介,安田雅昭,大西有希,川田博昭,平井義彦","ナノインプリントにおけるレジスト収縮の補正(3D形状補正)","第66回 応用物理学会春季学術講演会",,,,,,2019,Mar.
"中川裕喜,天谷賢治,大西有希","ディスクブレーキ圧力分布逆問題のための荷重センサの開発","第31回計算力学講演会",,,,,,2018,Nov.
"大西有希","10節点四面体要素を用いた平滑化有限要素法の汎用有限要素ソフトへの実装","第31回計算力学講演会",,,,,,2018,Nov.
"石井翼,天谷賢治,大西有希","逆解析を用いた電気化学反応の濃度依存特性の同定","第31回計算力学講演会",,,,,,2018,Nov.
"チェジンヨン,天谷賢治,大西有希","Spectral X線CTにおける階層ベイズモデルを用いた患者固有特性およびX線減衰係数の同定","第31回計算力学講演会",,,,,,2018,Nov.
"Tsubasa Ishii,Kenji Amaya,Yuki Onishi","A Novel Inverse Analysis Method to Identify Concentration and Current Density Distributions on Electrode Surface","AiMES 2018","ECS Transactions",,"Vol. 86","No. 4","pp. 29-38",2018,Sept.
"Ryunosuke YAMASHITA,Yuki ONISHI,Kenji AMAYA","Numerical modeling method to reproduce UV imprint process using thermo-viscoelastic constitutive law","Micro & Nano Engineering Conference (MNE2018)",,,,,,2018,Sept.
"綾見優斗,大西有希,天谷賢治,辻井雅人,谷中雅顕,米倉勲","有限要素解析を用いた多層フィルムピール試験におけるピール荷重急落現象のメカニズム解明",,"日本計算工学会論文集",,"Vol. 2018",,"p. 20180011",2018,Aug.
"Kai KITAMURA,Yuki ONISHI","Electrodeposition simulation with edge-based smoothed finite element method using 4-node tetrahedral elements for complex car body shapes","The 9th International Conference on Computational Methods (ICCM2018)",,,,,,2018,Aug.
"Yuki ONISHI","Selective cell-based smoothed finite element method using 10-node tetrahedral elements for large deformation of nearly incompressible solids","The 9th International Conference on Computational Methods (ICCM2018)",,,,,,2018,Aug.
"Yuki ONISHI,Ryoya IIDA,Kenji AMAYA","Accurate viscoelastic large deformation analysis using F-bar aided edge-based smoothed finite element method for 4-node tetrahedral meshes (F-barES-FEM-T4)",,"International Journal of Computational Methods",,"Vol. 15","No. 7",,2018,July
"Ryoya IIDA,Yuki ONISHI,Kenji AMAYA","Performance Evaluation of Stabilized F-bar Aided Edge-based Smoothed Finite Element Method with Four-node Tetrahedral Elements (SymF-barES-FEM-T4) for Contact Problem","The 13th World Congress in Computational Mechanics (WCCM2018)",,,,,,2018,July
"Yuki ONISHI,Ryoya Iida,Kenji Amaya","Element-wise Selective Smoothed Finite Element Method for 10-node Tetrahedral Elements in Large Deformation Problems","The 13th World Congress in Computational Mechanics (WCCM2018)",,,,,,2018,July
"大西有希","複雑形状を持つ微圧縮性材料の大変形に対する10 節点四面体要素を用いた要素内選択的平滑化有限要素法","第23回計算工学講演会",,,"Vol. 23",,,2018,June
"北村海,大西有希,樫山武士,天谷賢治","実ラインの電着条件を模した基礎実験に基づく高精度自動車電着塗装シミュレーション","第23回計算工学講演会",,,"Vol. 23",,,2018,June
"Tomoya Watanabe,Haruo Isoda,Yasuo Takehara,Masaki Terada,Takehiro Naito,Takafumi Kosugi,Yuki Onishi,Chiharu Tanoi,Takashi Izumi","Hemodynamic vascular biomarkers for initiation of paraclinoid internal carotid artery aneurysms using patient-specific computational fluid dynamic simulation based on magnetic resonance imaging",,"Neuroradiology",,,,,2018,June
"大西有希,天谷賢治","電着塗装の膜厚シミュレーションの高精度課と有効性",,"月刊ファインケミカル",,"Vol. 47","No. 2","pp. 50-57",2018,Feb.
"Yuki ONISHI","F-bar aided edge-based smoothed finite element method with 4-node tetrahedral elements for static large deformation elastoplastic problems",,"International Journal of Computational Methods",,"Vol. 15","No. 1",,2018,Jan.
"Ryoya IIDA,Yuki ONISHI,Kenji AMAYA","A stabilization method of F-barES-FEM-T4 for dynamic explicit analysis of nearly incompressible materials",,"International Journal of Computational Methods",,,,,2018,
"石井翼,天谷賢治,大西有希","逆解析を適用した分極曲線評価システムの開発",,"計算数理工学論文集",,"Vol. 17",,"pp. 155--160",2017,Dec.
"平岡泰明,大西有希,天谷賢治,斎藤達哉","逆解析による犠牲陽極の位置及び電流モニタリング手法","第64回材料と環境討論会",,,,,,2017,Nov.
"飯田綾也,大西有希,天谷賢治","F-bar 援用の平滑化有限要素法を用いたゴム材料の高精度大変形解析","ゴムの力学ワークショップ 2017",,,,,,2017,Nov.
"綾見優斗,大西有希,天谷賢治,辻井雅人,谷中雅顕","多層樹脂フィルム剥離試験の接着面におけるキャビティ発生の有限要素解析","第30回計算力学講演会",,,,,,2017,Sept.
"飯田綾也,大西有希,天谷賢治","4 節点四面体要素を用いたF-bar援用の平滑化有限要素法の動的陽解法における安定化","第30回計算力学講演会",,,,,,2017,Sept.
"大西有希,飯田綾也,天谷賢治","F-bar援用の四面体平滑化有限要素法によるゴム粘弾 性大変形解析","第30回計算力学講演会",,,,,,2017,Sept.
"Yuki ONISHI,Ryoya IIDA,Kenji AMAYA","Accurate viscoelastic large deformation analysis using F-bar aided edge-based smoothed finite element method for 4-node tetrahedral meshes (F-barES-FEM-T4)","The 8th International Conference on Computational Methods (ICCM)",,,,,,2017,July
"Yuki ONISHI","F-bar aided edge-based smoothed finite element method with 4-node tetrahedral elements for viscoelastic large deformation problems","The 14th U.S. National Congress on Computational Mechanics (USNCCM)",,,,,,2017,July
"Ryoya IIDA,Yuki ONISHI,Kenji AMAYA","A stabilization method of F-barES-FEM-T4 for dynamic explicit analysis of nearly incompressible solids","The 8th International Conference on Computational Methods (ICCM)",,,,,,2017,July
"増谷浩一,大西有希,天谷賢治","塩水膜環境における炭素ーアルミニウムガルバニック腐食の数値解析",,"材料と環境",,"Vol. 66","No. 7","pp. 246-254",2017,July
"大西有希,志村彩夏,天谷賢治","粘着テープを用いない簡便な4枚ボックス電着試験法",,"塗装工学",,"Vol. 52","No. 6","pp. 177-186",2017,June
"大西有希,志村彩夏,天谷賢治","塗膜析出前の濁りと履歴依存性を考慮した自動車ボディ電着塗装の高精度シミュレーション","第22回計算工学講演会",,,,,,2017,June
"大西有希","四面体平滑化有限要素法による高精度な粘弾性大変形解析","第22回計算工学講演会",,,,,,2017,May
"志村彩夏,大西有希,天谷賢治","塗膜析出前の濁りと履歴依存性を考慮した電着塗装シミュレーション",,"日本計算工学会論文集",,,,,2017,Apr.
"Y. Onishi,R. Iida,K. Amaya","F-bar aided edge-based smoothed finite element method using tetrahedral elements for finite deformation analysis of nearly incompressible solids",,"International Journal for Numerical Methods in Engineering",,"Vol. 109","No. 11","pp. 1582--1606",2017,Mar.
"志村彩夏,大西有希,天谷賢治","粘着テープを用いない簡便な4枚ボックス電着試験法","第３２回塗料・塗装研究発表会","第３２回塗料・塗装研究発表会 講演予稿集",,,,"pp. 55-59",2017,Mar.
"Yuki ONISHI","Recent advances in smoothed finite element methods with tetrahedral elements","KAIST Seminar",,,,,,2017,Jan.
"飯田稜也,大西有希,天谷賢治","4節点四面体要素を用いたF-bar援用の平滑化有限要素法による微圧縮性材料の大変形動的陽解法",,"日本計算工学会論文集",,,,,2017,Jan.
"井上正則,天谷賢治,大西有希,中川裕喜,羽鳥公一","逆解析を用いたブレーキパッド接触面圧分布の内外面個別同定",,"計算数理工学論文集",,"Vol. 16",,,2016,Dec.
"大西有希","四面体を用いた平滑化有限要素法による大変形解析の最新動向","日本学術会議 第6回 計算力学シンポジウム",,,,,,2016,Dec.
"Masanori INOUE,Kenji AMAYA,Yuki ONISHI,Jooyoung CHUNG,Koichi HATORI","Effective Identification for Anisotropic Elastic Parameters of the Disk Brake Pad Linings Using Inverse Analysis","The 10th International Conference on Fracture & Strength of Solid (FEOFS)",,,,,,2016,Sept.
"Watanabe Tomoya,Haruo Isoda,Yasuo Takehara,Masaki Terada,Takehiro Naito,Chiharu Tanoi,Takafumi Kosugi,Yuki Onishi,Atsushi Fukuyama","Hemodynamic Vascular Biomarkers at the Site at which Sidewall Intracranial Aneurysms Occur at the Paraclinoid Internal Carotid Artery Determined Using Patient-specific Computational Fluid dynamic Simulation Based on MR Imaging","SMRA 28th Annual International Conference (MRAClub2016)",,,,,,2016,Sept.
"Kenji AMAYA,Koichi MASUYA,Yuki ONISHI","Numerical simulation for carbon-aluminum galvanic corrosion under a saltwater film","The Annual Event of the European Federation of Corrosion (EUROCORR)",,,,,,2016,Sept.
"大西有希,飯田稜也,天谷賢治","ゴム大変形解析における F-barES-FEM-T4 の 接触安定性評価","第29回計算力学講演会",,,,,,2016,Sept.
"中川裕喜,井上正則,大西有希,天谷賢治","逆 解析を用いたディスクブレーキの内外面圧力分布の個別同定","第29回計算力学講演会",,,,,,2016,Sept.
"井上正則,天谷賢治,大西有希,鯨井孝典,羽鳥公一","逆解析を用いた制動中のブレーキパッド‐ロータ間接触面圧分布同定","第29回計算力学講演会",,,,,,2016,Sept.
"志村彩夏,大西有希,天谷賢治","履歴依存性を考慮した電着塗装シミュレーション","第29回計算力学講演会",,,,,,2016,Sept.
"Yuki ONISHI,Koichi MASUYA,Kenji AMAYA","Multi-physics Galvanic Corrosion Analysis for Carbon-Aluminium Structures under Saltwater Film","The 10th International Conference on Fracture & Strength of Solid (FEOFS)",,,,,,2016,Sept.
"Yuki Onishi,Ryoya Iida,Kenji Amaya","F-bar aided edge-based smoothed finite element methods with 4-node tetrahedral elements for static large deformation hyperelastic and elastoplastic problems","The 7th International Conference on Computational Methods (ICCM2016)",,,,,,2016,Aug.
"Ryoya IIDA,Yuki ONISHI,Kenji AMAYA","Accurate Dynamic Simulations of Multi-Material Models with Rubber-like Materials using F-barES-FEM-T4","The 10th International Conference on Fracture & Strength of Solid (FEOFS)",,,,,,2016,Aug.
"Ryoya IIDA,Yuki Onishi,Kenji AMAYA","Performance Evaluation of Various Smoothed Finite Element Methods with Tetrahedral Elements in Large Deformation Dynamic Analysis","The 7th International Conference on Computational Methods (ICCM2016)",,,,,,2016,Aug.
"Yuki Onishi,Ryoya Iida,Kenji Amaya","A Locking-free and Pressure Oscillation-free Elasto-plastic Large Deformation Analysis using F-barES-FEM-T4","The 12th World Congress on Computational Mechanics (WCCM XII)",,,,,,2016,July
"Ryoya IIDA,Yuki Onishi,Kenji AMAYA","Performance Evaluation of F-barES-FEM-T4 in Dynamic Analysis","The 12th World Congress on Computational Mechanics (WCCM XII)",,,,,,2016,July
"Ayaka Shimura,Yuki Onishi,Kenji Amaya","Identification of Paint Resistance and Deposition Model Parameters for Electrodeposition Coating Simulation","The 12th World Congress on Computational Mechanics (WCCM XII)",,,,,,2016,July
"飯田稜也,大西有希,天谷賢治","微圧縮性材料の動解析における種々の四面体平滑化有限要素法の安定性評価","第21回計算工学講演会","計算工学講演論文集",,"Vol. 21",,,2016,June
"大西有希,飯田稜也,天谷賢治","F-barES-FEM四面体要素による圧力振動フリー弾塑性大変形解析","第21回計算工学講演会","計算工学講演論文集",,"Vol. 21",,,2016,June
"大西有希","平滑化有限要素法によるゴム大変形の高精度解析","日本ゴム協会 第25回ゴムの力学研究分科会",,,,,,2016,Mar.
"志村彩夏,大西有希,天谷賢治","電着塗装シミュレーションにおける濁りの電気抵抗を考慮した塗膜抵抗モデル","第31回 塗料・塗装研究発表会","第31回 塗料・塗装研究発表会 講演予稿集",,,,"pp. 60-65",2016,Mar.
"大西有希","平滑化有限要素法の研究紹介","土木学会応用力学委員会 若手研究者の集い",,,,,,2016,Mar.
"伊東 亮太,大西 有希,天谷 賢治,小杉 崇文,小杉 隆司,礒田 治夫","画像復元手法を用いた 4D Flow 流速測定の高精度化","第28回バイオエンジニアリング講演会",,,,,,2016,Jan.
"Yuki ONISHI","Performance Evaluation of Smoothed Finite Element Methods with Tetrahedral Elements in Large Deformation Elasto-Plastic Analysis","The 22nd International Symposium on Plasticity and Its Current Applications (Plasticity2016)",,,,,,2016,Jan.
"井上正則,天谷賢治,大西有希,鄭珠迎,羽鳥公一","逆解析を用いたディスクブレーキパッド摩擦材の異方性弾性定数の非侵襲同定",,"日本機械学会論文集Ａ編",,,,,2016,
"天谷賢治,大友暢寛,大西有希","非点収差オフセットを持つスポット像からの収差逆解析",,"計算数理工学論文集",,"Vol. 15",,"pp. 97-100",2015,Dec.
"増谷浩一,大西有希,天谷賢治","塩水膜環境におけるcarbon-aluminiumガルバニック腐食の数値解析","第62回材料と環境討論会",,,,,,2015,Nov.
"渡辺智哉,礒田治夫,竹原康雄,寺田理希,小杉崇文,大西有希","MRを用いた患者固有計算流体力学解析にセグメンテーションによる血管径の大きさと流量の変化が与える影響","第43回日本放射線技術学会秋季学術大会",,,,,,2015,Oct.
"大友暢寛,大西有希","非点収差オフセットを持つスポット像からの収差逆解析","第28回計算力学講演会",,,,,,2015,Oct.
"井上正則,天谷賢治,大西有希,鄭珠迎,羽鳥公一","逆解析を用いたディスクブレーキパッド摩擦材の異方性弾性係数の非破壊計測","第28回計算力学講演会",,,,,,2015,Oct.
"中川裕喜,天谷賢治,大西有希","内外面で異なる分布を持つブレーキパッドの接触圧力分布同定","第28回計算力学講演会",,,,,,2015,Oct.
"飯田稜也,大西有希,天谷賢治","四面体要素を用いたF-bar aided edge-based smoothed finite element method (F-barES-FEM-T4) による微圧縮性材料の動的陽解法","第28回計算力学講演会",,,,,,2015,Oct.
"大西有希,天谷賢治","四面体要素を用いたF-bar aided edge-based smoothed finite element method (F-barES-FEM-T4) による微圧縮性材料の静的陰解法大変形解析","第28回計算力学講演会",,,,,,2015,Oct.
"Yuki ONISHI","F-barES-FEM-T4: a new finite element formulation of nearly incompressible solids with tetrahedral elements","The 3rd International Workshops on Advances in Computational Mechanics (IWACOM III)",,,,,,2015,Oct.
"Yuki ONISHI,Kenji AMAYA","Performance Evaluation of the Selective Smoothed Finite Element Methods using Tetrahedral Elements with Deviatoric/Hydrostatic Split in Large Deformation Analysis",,"Theoretical and Applied Mechanics Japan",,"Vol. 63",,"pp. 55--65",2015,Oct.
"石黒健太,礒田治夫,寺田理希,小森芳秋,小杉崇文,竹原 康雄,石黒健太,礒田治夫,寺田理希,小森芳秋,小杉崇文,大西有希,竹原 康雄","脳血管及び脳動脈瘤の計算流体力学解析に及ぼす異なる流出境界条件の影響","第43回日本磁気共鳴医学会大会",,,,,,2015,Sept.
"Yuki ONISHI","Application of Preconditioned Iterative Methods in Selective Smoothed Finite Element Methods with Tetrahedral Elements for Nearly Incompressible Materials","The 13th US National Congress on Computational Mechanics (USNCCM13)",,,,,,2015,July
"Yuki ONISHI","F-bar aided edge-based smoothed finite element method with tetrahedral elements for large deformation analysis of nearly incompressible materials","The 6th International Conference on Computational Methods (ICCM2015)","Proceedings of the 6th International Conference on Computational Methods (ICCM2015)",,,,,2015,July
"大西有希,天谷賢治","四面体要素に内部節点を追加した平滑化有限要素法による高精度大変形解析","第20回計算工学講演会","計算工学講演論文集",,"Vol. 20",,,2015,June
"渡辺智哉,礒田治夫,竹原康雄,寺田理希,小杉崇文,大西有希","MRを用いた患者固有計算流体力学解析による側壁型脳動脈瘤発生部位の血管壁バイオマーカー","第71回日本放射線技術学会総会学術大会",,,,,,2015,Apr.
"Yuki ONISHI","Recent Advancement in Smoothed Finite Element Methods for Locking-free Analysis with Tetrahedral Elements","The 7th Korea-Japan Workshop on Computational Mechanics","Proceeding of the 7th Korea-Japan Workshop on Computational Mechanics",,,,,2015,Apr.
"Haruo Isoda,Yasuo Takehara,Takashi Kosugi,Masaki Terada,Takehiro Naito,Yuki Onishi,Chiharu Tanoi,Kenji Amaya,Harumi Sakahara","MR-based computational fluid dynamics with patient-specific boundary conditions for a sidewall aneurysm initiation of a basilar artery",,"Magnetic Resonance in Medical Sciences",,"Vol. 14","No. 2","pp. 139-144",2015,Feb.
"石黒健太,鈴木麻友,礒田治夫,小杉崇文,大西有希,竹原康雄,寺田理希,小森芳秋,長縄慎二","計算流体力学を用いた脳血管の血流動態解析 ― 症例固有流出境界条件と自由流出境界条件の比較 ―","第77回 東海総合画像医学研究会",,,,,,2015,Jan.
"Haruo ISODA,Kazushige ICHIKAWA,Atsushi FUKUYAMA,Yoshiaki KOMORI,Yasuo TAKEHARA,Takashi KOSUGI,Yuki ONISHI,Shinji NAGANAWA","Investigation of Accuracy of Hemodynamics and Wall Shear Stress for Intracranial Arteries Obtained from MR Fluid Dynamics (MRFD) using 3D Cine Phase-contrast MR Imaging","The 100th Scientific Assembly and Annual Meeting of Radiological Society of North America (RSNA2014)",,,,,,2014,Dec.
"Kenji Amaya,Naoki Yoneya,Yuki Onishi","Obtaining Corrosion Rates by Bayesian Estimation: Numerical Simulation Coupled with Data",,"Interface",,"Vol. 23","No. 4","pp. 53-57",2014,Dec.
"鯨井孝典,大西有希,天谷賢治","逆解析によるディスクブレーキの圧力分布同定","日本機械学会 第27回計算力学講演会 (CMD2014)","第27回計算力学講演会予稿集",,,,,2014,Nov.
"増谷浩一,大西有希,天谷賢治","塩水膜環境におけるガルバニック腐食に対するマルチフィジックスシミュレーション","日本機械学会 第27回計算力学講演会 (CMD2014)","第27回計算力学講演会予稿集",,,,,2014,Nov.
"大友暢寛,大西有希,天谷賢治","非点収差オフセットを持つスポット像からの収差解析","日本機械学会 第27回計算力学講演会 (CMD2014)","27回計算力学講演会予稿集",,,,,2014,Nov.
"平岡泰明,天谷賢治,大西有希","腐食モニタリングにおける曖昧な先験情報を活用した逆解析手法","日本機械学会 第27回計算力学講演会 (CMD2014)","第27回計算力学講演会予稿集",,,,,2014,Nov.
"綾見優斗,大西有希,天谷賢治","非線形逐次ベイズ推定のための効率的なグリッドフィルタの開発","日本機械学会 第27回計算力学講演会 (CMD2014)","第27回計算力学講演会予稿集",,,,,2014,Nov.
"大西有希,天谷賢治","平滑化有限要素法による四面体要素を用いたゴムの大変形解析","日本機械学会 第27回計算力学講演会 (CMD2014)","第27回計算力学講演会予稿集",,,,,2014,Nov.
"大西 有希","3D cine phase-contrast MRI (4D Flow)血流速測定を援用した患者固有血流動態解析による脳動脈瘤の破裂危険性評価","株式会社パイオラックスメディカルデバイスとのマッチング会×セミナー",,,,,,2014,Nov.
"礒田治夫,渡辺智哉,竹原康雄,小杉隆司,寺田理希,大西有希,田ノ井千春,天谷賢治,阪原晴海","MRに基づいた計算流体力学による脳動脈瘤の血流動態解析",,"画像診断",,"Vol. 34","No. 13","pp. 1421-1432",2014,Oct.
"天谷 賢治,中村 なつ美,大西 有希","データ同化を用いた蛍光イメージ ングの精度向上","第63回理論応用力学講演会","第63回理論応用力学講演会講演論文集",,,,,2014,Sept.
"大西有希,天谷賢治","四面体要素を用いた大変形解析における種々の平滑化有限要素法の性能評価","第63回理論応用力学講演会","第63回理論応用力学講演会講演論文集",,,,,2014,Sept.
"R. Ito,Y. Onishi,K. Ichikawa,T. Kosugi,H. Isoda,Y. Takehara,T. Kosugi,K. Amaya","Accurate estimation of the volume flow rate in the cerebral artery using 3D cine phase-contrast MRI (4D Flow)","26th Annual International Conference on Magnetic Resonance Angiography (MRAClub2014)",,,,,,2014,Sept.
"大西 有希","四面体要素を用いた選択的平滑化有限要素法によるロッキングフリー大変形アダプティブメッシュリゾーニング解析","第27回計算数理工学フォーラム","計算数理工学レビュー",,"Vol. 2014","No. 2","  29-45",2014,Sept.
"Yuki ONISHI,Kenji AMAYA","A locking-free selective smoothed finite element method using tetrahedral and triangular elements with adaptive mesh rezoning for large deformation problems",,"International Journal for Numerical Methods in Engineering",,"Vol. 99","No. 5","pp. 354--371",2014,Aug.
"Koichi MASUYA,Yuki ONISHI,Kenji AMAYA","Numerical multiphysics simulation for localized galvanic corrosion problems","The 11th World Congress on Computational Mechanics (WCCM XI)",,,,,,2014,July
"Takahiro SHIOTSU,Kimiaki UEMURA,Takamitsu TOCHINO,Shuuya OOi,Yuki ONISHI,Masaaki YASUDA,Hiroaki KAWATA,Takuya KOBAYASHI,Yoshihiko HIRAI","Simulation of the template release process based on fracture mechanics in nanoimprint lithography",,"Microelectronic Engineering",,"Vol. 123",,"pp. 105-111",2014,July
"Yuki ONISHI,Kenji AMAYA","A Locking-free smoothed finite element formulation (modified selective FS/NS-FEM-T4) with tetrahedral mesh rezoning for large deformation problems","The 11th World Congress on Computational Mechanics (WCCM XI)",,,,,,2014,July
"Yuki ONISHI,Kenji AMAYA","Performance Evaluation of the Selective Smoothed Finite Element Method with Deviatoric/Hydrostatic Split","The 5th International Conference on Computational Methods (ICCM2014)",,,,,,2014,July
"大西有希,天谷賢治","大変形問題に対する四面体要素を用いたロッキングフリー選択的平滑化有限要素法","第19回計算工学講演会","計算工学講演会論文集",,"Vol. 19",,,2014,June
"礒田治夫,市川和茂,福山篤司,小森芳秋,小杉隆司,大西有希,竹原康雄,長縄慎二","脳血管を対象とした磁気共鳴流体力学の精度検証","第37回日本バイオレオロジー学会年会",,,,,,2014,June
"大西有希,天谷賢治","平滑化有限要素法(S-FEM)に基づくロッキングフリー四面体要素","第17回応用力学シンポジウム","第17回応用力学シンポジウム講演概要集",,,,,2014,May
"Yuki ONISHI,Kenji AMAYA","Locking-Free Smoothed Finite Element Method with Tetrahedral/Triangular Mesh Rezoning in Severely Large Deformation Problems","1st International Conference on Computational Engineering and Science for Safety and Environmental Problems (COMPSAFE2014)",,,,,,2014,Apr.
"Koichi MASUYA,George OCHIAI,Yuki ONISHI,Kenji AMAYA","Numerical Method for Analyzing Time-Dependent Localized Corrosion under Accumulated Rust","1st International Conference on Computational Engineering and Science for Safety and Environmental Problems (COMPSAFE2014)",,,,,,2014,Apr.
"米山祐也,礒田治夫,市川和茂,大西有希,小杉隆司,福山篤司,小森芳秋","3次元シネ位相コントラスト磁気共鳴法を用いた血流動態解析の精度検証：ファントム物質による影響","第70回日本放射線技術学会総会学術大会",,,,,,2014,Apr.
"長井悠,大西有希,天谷賢治","電着シミュレーションにおけるクーロン効率の膜厚依存性を考慮した非線形塗膜析出モデル","第２９回塗料・塗装研究発表会",,,,,"pp. 21-25",2014,Mar.
"礒田治夫,竹原康雄,渡辺智哉,寺田理希,小杉崇文,伊東亮太,大西有希,小杉隆司,天谷賢治,阪原晴海","経時的形態変化を来した脳動脈瘤に対する「磁気共鳴に基づいた計算流体力学」による血管壁バイオマーカー","第43回日本神経放射線学会",,,,,,2014,Mar.
"礒田治夫,市川和茂,米山祐也,大西有希,小杉崇文,小杉隆司,福山篤司,小森芳秋,長縄慎二","計算流体力学の境界条件としての3D cine PC MRの精度検証:異なる材質ファントムによる検討","第43回日本神経放射線学会",,,,,,2014,Mar.
"長井悠,大西有希,天谷賢治","電着塗膜の析出シミュレーションのための流速依存性を考慮した塗膜析出モデル",,"塗装工学",,"Vol. 49","No. 3","pp. 84-92",2014,Mar.
"Yuki ONISHI,Kenji AMAYA","Smoothed Finite Element Method Based on Incremental Implicit Equilibrium Equation for Large Deformation Mesh Rezoning Analysis","5TH ASIA PACIFIC CONGRESS ON COMPUTATIONAL MECHANICS & 4TH INTERNATIONAL SYMPOSIUM ON COMPUTATIONAL MECHANICS",,,,,,2013,Dec.
"大西有希","熱ナノインプリントの大変形有限要素解析","日本塑性加工学会 ナノ・マイクロ加工分科会 第２回セミナー",,,,,,2013,Dec.
"増谷浩一,大西有希,西條康彦,渡邉恵里子,天谷賢治","水膜環境における異種金属接触腐食シミュレーション","第26回計算力学講演会","第26回計算力学講演会 講演論文集",,,,,2013,Nov.
"中村なつ美,天谷賢治,大西有希","データ同化を用いたカルシウムイメージングの精度向上","第26回計算力学講演会","第26回計算力学講演会 講演論文集",,,,,2013,Nov.
"鄭珠迎,天谷賢治,大西有希","逆解析を用いた自動車用ディスクブレーキパッドの異方性弾性係数の非破壊計測","第26回計算力学講演会","第26回計算力学講演会 講演論文集",,,,,2013,Nov.
"長井悠,大西有希,天谷賢治","塗膜析出現象の非線形性を考慮した電着塗装シミュレーション","第26回計算力学講演会","第26回計算力学講演会 講演論文集",,,,,2013,Nov.
"伊東亮太,大西有希,天谷賢治,市川和茂,礒田治夫,小杉隆司,小杉崇文","CFD血流解析における3D cine phase contrast MRIの活用","第26回計算力学講演会","第26回計算力学講演会 講演論文集",,,,,2013,Nov.
"大西有希,天谷賢治","幾何学非線形および材料非線形を含むメッシュリゾーニング解析に対する平滑化有限要素法の定式化","第26回計算力学講演会","第26回計算力学講演会 講演論文集",,,,,2013,Nov.
"Yuki ONISHI,Kenji AMAYA","A Novel Smoothed Finite Element Formulation Based on the Implicit Incremental Equilibrium Equation for Large Deformation Analysis with Mesh Rezoning","12th U.S. National Congress on Computational Mechanics (USNCCM12)",,,"Vol. 12",,,2013,July
"Kenji AMAYA,Yuki ONISHI,Yohei KISHIMOTO","Development of Wireless Optical Strain Gauge with Elastic Hinges","The 9th International Conference on Fracture and Strength of Solid",,,,,,2013,June
"Yuki ONISHI,Kohei AOKI,Kenji AMAYA,Toshiyasu SHIMIZU,Haruo ISODA,Yasuo TAKEHARA,Harumi SAKAHARA,Takashi KOSUGI","Accurate determination of patient-specific boundary conditions in computational vascular hemodynamics using 3D cine phase contrast MRI",,"International Journal for Numerical Methods in Biomedical Engineering",,"Vol. 29","No. 10","pp. 1089-1103",2013,June
"落合穣司,大西有希,天谷賢治","錆の堆積による局部腐食進展の数値解析","第18回計算工学講演会","計算工学講演論文集",,"Vol. 18",,,2013,June
"大西有希,天谷賢治","平滑化有限要素法と増分形釣合方程式を組み合わせた大変形問題に対する安定かつ高精度なリゾーニング手法","第18回計算工学講演会","計算工学講演論文集",,"Vol. 18",,,2013,June
"Jooyoung Chung,Kenji Amaya,Yuki Onishi","Non-destructive measurement of anisotropic elastic properties of composite resin using inverse analysis","The 9th International Conference on Fracture and Strength of Solid",,,,,,2013,June
"Yuki ONISHI,Kenji AMAYA","An Accurate and Stable Static-Implicit Finite Element Rezoning Method for Large Deformation Elasto-Plastic Analysis","The 9th International Conference on Fracture and Strength of Solid",,,,,,2013,June
"Yuki ONISHI,Kenji AMAYA","A Novel Static-Implicit Finite Element Formulation for Large Deformation Analysis Based on the Incremental Equilibrium Equation",,"Theoretical and Applied Mechanics Japan",,"Vol. 61",,"pp. 135-144",2013,May
"Kazuyoshi Okada,KENJI AMAYA,YUKI ONISHI","Development of Mathematical Model Considering High-NA Imaging for Aberration Retrieval Method from Spot Images",,"Theoretical and Applied Mechanics Japan",,"Vol. 61",,"pp. 215-223",2013,May
"天谷賢治,大西有希","腐食防食数値シミュレーションの開発と最新応用",,"材料と環境",,"Vol. 62","No. 10","pp. 342-347",2013,Apr.
"長井悠,大西有希,天谷賢治","流速依存性を考慮した電着塗装シミュレーションのための塗膜析出モデル","第２８回塗料・塗装研究発表会","第２８回塗料・塗装研究発表会 講演予稿集",,"Vol. 28",,"pp. 1-6",2013,Mar.
"大西有希,天谷賢治","増分形釣合方程式に基づく陰的有限要素法による大変形弾塑性リゾーニング解析","第62回理論応用力学講演会","第62回理論応用力学講演会 講演論文集",,"Vol. 62",,,2013,Mar.
"礒田治夫,大西有希,竹原康雄,清水利恭,青木康平,小杉隆司,天谷賢治,阪原晴海","脳動脈瘤の「磁気共鳴に基づいた計算流体力学」における流速境界条件の有用性： 模擬データを用いた検討","第42回日本神経放射線学会",,,,,,2013,Feb.
"礒田治夫,清水利恭,寺田理希,竹原康雄,大西有希,青木康平,小杉隆司,天谷賢治","経時的に瘤状変化を来した脳底動脈の「磁気共鳴に基づいた計算流体力学」の検討","第42回日本神経放射線学会",,,,,,2013,Feb.
"清水利恭,小杉隆司,大西有希,青木康平,礒田治夫,竹原康雄","4D Flow血流速測定に基づくCFD血流解析システム（その２：データの流れと処理）","第25回バイオエンジニアリング講演会","第25回バイオエンジニアリング講演会講演論文集",,,,,2013,Jan.
"大西有希,青木康平,天谷賢治,清水利恭,礒田治夫,竹原康雄,小杉隆司","4D Flow血流速測定に基づくCFD血流解析システム（その１：手法と検証）","第25回バイオエンジニアリング講演会","第25回バイオエンジニアリング講演会講演論文集",,,,,2013,Jan.
"岡田和佳,天谷賢治,大西有希","スポット像を用いた収差逆解析の安定性",,"計算数理工学論文集",,"Vol. 12",,"pp. 19-24",2012,Dec.
"天谷賢治,大西有希","腐食工学における数値シミュレーション(最先端研究)",,"シミュレーション","日本シミュレーション学会","Vol. 31","No. 4","pp. 239-245",2012,Dec.
"岡田和佳,天谷賢治,大西有希","低解像度スポット像を用いた収差解析手法の開発",,"光学",,"Vol. 41","No. 12","pp. 627-634",2012,Dec.
"Tatsuro Matsuoka,Keiichi Otsubo,Yuki Onishi,Kenji Amaya,Masanori Hayase","Inverse analysis of accelerator distribution in copper through silicon via filling",,"Electrochimica Acta",,"Vol. 82","No. 1","pp. 365-362",2012,Nov.
"長井 悠,大西 有希,天谷 賢治","高精度電着塗装シミュレーションのための正確な塗膜抵抗・析出モデル",,"日本機械学会論文集Ａ編",,"Vol. 78","No. 794","pp. 1446--1461",2012,Oct.
"Yuki ONISHI,Kenji AMAYA","Floating stress-point integration meshfree method for large deformation analysis of elastic and elastoplastic materials",,"International Journal for Numerical Methods in Engineering",,"Vol. 92",,"pp. 36-55",2012,Oct.
"岸本洋平,天谷賢治,大西有希,岡田和佳","回折格子を用いた光学ひずみゲージ測定法","日本非破壊検査協会 秋季講演大会",,,,,"p. 59~62",2012,Oct.
"Kazuyoshi OKADA,Kenji AMAYA,Yuki ONISHI","Development of Aberration Retrieval Method using Low-Resolution Spot Images","International Computational Mechanics Symposium (ICMS)",,,,,,2012,Oct.
"Yuki ONISHI,Kenji AMAYA","A Stable Rezoning Method for Large Deformation Finite Element Analysis using Incremental Equilibrium Equation","International Computational Mechanics Symposium (ICMS)",,,,,,2012,Oct.
"Haruo Isoda,Yuki Onishi,Yasuo Takehara,Toshiyasu Shimizu,Kohei Aoki,Takashi Kosugi,Kenji Amaya,Harumi Sakahara","Usefulness of velocity profiles based on 3D cine PC MR used as boundary conditions for computational fluid dynamics of an intracranial aneurysm: investigation with the aid of simulated data set","International Intracranial Stent Meting (ICS)",,,,,,2012,Oct.
"長井 悠,大西 有希,天谷 賢治","高精度電着塗装シミュレーションのための塗膜析出モデルの改良と検証","第１２６回表面技術協会講演大会",,,,,,2012,Sept.
"大西 有希,落合 穣司,天谷 賢治,滝安純平","局部腐食の時間進展予測のための新しい数値解析手法","第１２６回表面技術協会講演大会",,,,,,2012,Sept.
"Yuki ONISHI,Kohei AOKI,Kenji AMAYA,Toshiyasu SHIMIZU,Haruo ISODA,Yasuo TAKEHARA,Takashi KOSUGI,M ALLEY,T WAKAYAMA","Accurate Determination of Inlet/Outlet Boundary Conditions in Vascular CFD Analysis using 4D-Flow Velocimetry","24th Annual International Conference Magnetic Resonance Angiography (MRAClub2012)",,,,,,2012,Sept.
"青木康平,大西有希,天谷賢治,清水利恭,礒田治夫,竹原康雄,小杉隆司","MR based CFD による脳動脈瘤WSS分布推定における血管形状抽出法および血液の非ニュート ン性の影響","日本機械学会 2012年度年次大会","日本機械学会2012年度年次大会講演論文集",,,,,2012,Sept.
"大西有希,青木康平,天谷賢治,清水利恭,礒田治夫,竹原康雄,小杉隆司","3D cine PC-MR 血流速度測定を用いたCFD 血流 解析の正確な流入出境界条件の決定法","日本機械学会 2012年度年次大会","日本機械学会2012年度年次大会講演論文集",,,,,2012,Sept.
"礒田治夫,大西有希,竹原康雄,清水利恭,青木康平,小杉隆司,天谷賢治,阪原晴海","3D cine PC MRデータに基づいた脳動脈瘤の計算流体力学における流速境界条件の有用性：模擬データを用いた検討","第40回日本磁気共鳴医学会大会",,,,,,2012,Sept.
"大西有希,天谷賢治","増分形釣合方程式を用いた大変形有限要素解析におけるリゾーニング法の安定化","M&M若手シンポジウム",,,,,,2012,Aug.
"Yuki ONISHI,Kenji AMAYA","A novel finite element formulation for large deformation analysis based on incremental equilibrium equation in conjunction with rezoning technique","10th World Congress on Computational Mechanics (WCCM2012)","Proceedings of the 10th World Congress on Computational Mechanics (WCCM2012)",,,,,2012,July
"木暮龍也,天谷賢治,大西有希","海洋構造物に対する相対位置を計測する音響測位手法の開発","第１７回計算工学講演会","計算工学講演会論文集",,"Vol. 17",,,2012,May
"大西有希,天谷賢治","増分形釣合方程式に基づくRezoning付き有限要素法による静的陰解法大変形解析","第１７回計算工学講演会","計算工学講演会論文集",,"Vol. 17",,,2012,May
"大西有希,滝安純平,天谷賢治","ボクセル有限体積法を用いた局部腐食進展解析","第１７回計算工学講演会","計算工学講演会論文集",,"Vol. 17",,,2012,May
"大西有希,長井悠,天谷賢治","電着塗装シミュレーョンのため塗膜析出モデルに関する基礎的検討","第２７回塗料･塗装研究発表会",,,,,,2012,Mar.
"岡田和佳,天谷賢治,大西有希","スポット像からの収差解析のための軸外結像を考慮した数理モデルの構築","第61回理論応用力学講演会",,,,,,2012,Mar.
"大西有希,天谷賢治","増分形釣合方程式に基づく大変形有限要素法の定式化","第61回理論応用力学講演会",,,,,,2012,Mar.
"Yuki ONISHI,Jumpei TAKIYASU,Kenji AMAYA,Hiroshi YAKUWA,Keisuke HAYABUSA","Numerical method for time-dependent localized corrosion analysis with moving boundaries by combining the finite volume method and voxel method",,"Corrosion Science",,"Vol. 63",,"pp. 210?224",2012,
"Kazuyoshi Okada,KENJI AMAYA,YUKI ONISHI","Stability of Aberration Retrieval Method using Spot Images","4th Asia-Pacific International Conference on Computational Methods in Engineering",,,,,,2012,
"E. Onate,D. R. J. Owen (Eds.),YUKI ONISHI","PARTICLE-BASED METHODS II Fundamentals and Applications",,,"International Center for Numerical Methods in Engineering (CIMNE)",,,,2011,Dec.
"Tatsuya KIGURE,Kenji AMAYA,Yuki ONISHI","Sound Source Localization using probability distribution of medium property","JSME 24th Computational Mechanics Division Conference",,,,,,2011,Oct.
"Yuki ONISHI,Kenji AMAYA,Ryuta IMAI","Meshfree Large Deformation Analysis with Modified Formulation of Floating Stress-point Integration","2nd International Conference on Particle-based Methods",,,,,,2011,Oct.
"大西有希,天谷賢治","内力増分を用いた浮動応力点積分の定式化によるメッシュフリー大変形解析",,"日本機械学会論文集Ａ編",,"Vol. 77","No. 782","pp. 1656-1670",2011,Oct.
"Kohei AOKI,Yuki ONISHI,Kenji AMAYA,Toshiyasu SHIMIZU,Haruo ISODA,Yasuo TAKEHARA,Takashi KOSUGI","Accuracy improvement of vascular wall shear stress estimation in the method of PC-MR based CFD","JSME 24th Computational Mechanics Division Conference",,,,,,2011,Oct.
"長井悠,大西有希,天谷賢治","境界要素法を用いた電着塗装シミュレーションの実問題への適用","第24回計算力学講演会",,,,,,2011,Oct.
"滝安純平,天谷賢治,大西有希","ボクセル法を用いた孔食シミュレータの開発","第24回計算力学講演会",,,,,,2011,Oct.
"大西有希,天谷賢治","浮動応力点積分メッシュフリー法を用いた大変形弾塑性解析","第24回計算力学講演会",,,,,,2011,Oct.
"大西有希,水野哲,天谷賢治","境界要素法を用いた電着塗装の数値シミュレーション",,"日本機械学会論文集Ａ編",,"Vol. 77","No. 781","pp. 1463-1477",2011,Sept.
"大西 有希,天谷 賢治","内力増分を用いた浮動応力点積分の定式化によるメッシュフリー大変形解析","第16回計算工学講演会",,,,,,2011,May
"水野哲,大西有希,天谷賢治","境界要素法を用いた電着塗装シミュレータの開発","第２６回塗料・塗装研究発表会",,,,,,2011,Mar.
"大西有希,天谷賢治","増分型仮想仕事式と浮動応力点積分に基づく大変形解析のためのGalerkinメッシュフリー法の定式化","第60回理論応用力学講演会",,,,,,2011,Mar.
"岡田和佳,天谷賢治,大西有希","低解像度スポット像からの収差解析手法の実験による検証","第60回応用力学講演会",,,,,,2011,
"八木史昭,天谷賢治,大西有希","弾性ヒンジ機構を用いたワイヤレス光学ひずみゲージの開発","第23回計算力学講演会",,,,,,2010,Sept.
"Huachuan Yao,天谷賢治,大西有希","タイヤホイール６分力計測におけるひずみゲージ配置の最適化","第23回計算力学講演会",,,,,,2010,Sept.
"本田瑛彦,岡田和佳,天谷賢治,大西有希","スポット像の特徴量を用いた収差逆解析の検討","第23回計算力学講演会",,,,,,2010,Sept.
"岡田和佳,天谷賢治,大西有希","低解像度スポット像からの収差解析手法の開発","第23回計算力学講演会",,,,,,2010,Sept.
"水野哲,大西有希,天谷賢治","境界要素法を用いた効率的な電着塗装シミュレータの開発","第23回計算力学講演会",,,,,,2010,Sept.
"米谷直樹,天谷賢治,大西有希,中山淳","数値逆解析を用いたバラストタンクの塗装状態のモニタリング精度向上","第23回計算力学講演会",,,,,,2010,Sept.
"大野弘樹,天谷賢治,大西有希","大規模海洋構造物における犠牲陽極発生電流量の逆解析","第23回計算力学講演会",,,,,,2010,Sept.
"青木康平,大西有希,天谷賢治,清水利恭,礒田治夫,竹原康雄,小杉隆司","CFD 解析を併用したPC-MR 血流速度測定による脳動脈瘤の血管壁剪断応力分布の同定","第23回計算力学講演会",,,,,,2010,Sept.
"K. Okada,K. Amaya,M. Ueshima,Y. Onishi","Development of Off-Axis Aberration Retrieval Method using Spot Images","7th International Conference on Optics-photonics Design & Fabrication",,,,,,2010,Apr.
"大西有希,天谷賢治","浮動応力点積分によるメッシュフリー大変形解析","第２３回計算力学講演会",,,,,,2010,
"Y. Onishi,K. Amaya","A Novel Meshfree Method for Large Deformation Analysis of Elastic and Viscoelastic Bodies without using Background Cells",,"Journal of Solid Mechanics and Materials Engineering",,"Vol. 4","No. 11","pp. 1673-1686",2010,
"Y. ONISHI,K. Amaya","A Novel Meshfree Method for Large Deformation Analysis of Elastic and Viscoelastic Bodies without using Background Cells","M&M International Symposium for Young Researchers",,,,,,2010,
"大西有希,天谷賢治","浮動評価点積分による大変形解析のためのメッシュフリー法","第１５回計算工学講演会",,,,,,2010,
"Y. ONISHI,KENJI AMAYA","A Meshfree Approach for Large Deformation Analysis in Thermal Nanoimprint","The 3rd Asian Symposium on Nano Imprint Lithography (ASNIL)",,,,,,2010,
"大野弘樹,天谷賢治,大西有希","境界要素法を用いた大規模海洋構造物の塗装劣化解析","第22回計算力学講演会",,,,,,2009,Oct.
"滝口真也,天谷賢治,大西有希","多重極モーメントを用いた注目領域を解析するための効率的境界要素法","第22回計算力学講演会",,,,,,2009,Oct.
"中村孝幸,天谷賢治,大西有希","マッチング液を用いないレンズの不均一屈折率分布の同定","第22回計算力学講演会",,,,,,2009,
"岸本喜直,天谷賢治,早房敬祐,大西有希","槽内電位の測定情報を利用したＬＳＩウェハ上のめっき電流密度の推定","第22回計算力学講演会",,,,,,2009,
"大西有希,山隅允裕,天谷賢治","任意形状ホイールに対するひずみゲージを用いた6分力逆解析",,"日本機械学会論文集A編","社団法人日本機械学会","Vol. 75","No. 759","pp. 1460-1467",2009,
"大西有希,天谷賢治","メッシュフリー法による粘弾性大変形解析","第２２回計算力学講演会",,,,,,2009,
"中山 淳,天谷賢治,山本規雄,大西有希","数値逆解析を用いたバラストタンクの塗装状態の遠隔モニタリング法の開発","第22回計算力学講演会",,,,,,2009,
"山隅允裕,天谷賢治,大西有希,岸本喜直","逆解析を用いたひずみゲージからのホイール６分力計測手法の開発","第22回計算力学講演会",,,,,,2009,
"八木史昭,天谷賢治,平本健治,大西有希","複雑形状鋼板の均一な通電加熱における効率的最適化法","第22回計算力学講演会",,,,,,2009,
"木暮龍也,祐川貴也,天谷賢治,大西有希","赤外線ふく射２色ＣＴ法を用いた爆発ガスの温度及び圧力分布測定手法の高精度化","第22回計算力学講演会",,,,,,2009,
"岡田和佳,天谷賢治,大西有希,上島正史","光軸外スポット像からの収差解析手法の開発","第22回計算力学講演会",,,,,,2009,
"滝本修二,天谷賢治,大西有希","犠牲陽極の残存量同定手法の境界要素解析による検証","第22回計算力学講演会",,,,,,2009,
"平井義彦ほか,大西有希","ナノインプリントの最新技術と装置・材料・応用",,,"フロンティア出版",,,,2008,June
"H. Takagi,M.Takahashi,R.Maeda,Y.Onishi,Y.Iriye,T.Iwasaki,Y.Hirai","Analysis of time dependent polymer deformation based on a viscoelastic model in thermal imprint process",,"Microelectronic Engineering",,"Vol. 85","No. 5","pp. 902-906",2008,May
"大西有希,高木秀樹,高橋正春,前田龍太郎,平井義彦","伝熱構造連成解析による熱ナノインプリントの 高スループット化の検討","第２１回計算力学講演会",,,,,,2008,
"H, Takagi,Y. Onishi,M. Takahashi,R. Maeda,Y. Iriye,T. Iwasaki,Y. Hirai","Experimental And Numerical Analysis On Recovery Of Polymer Deformation After Demolding In Hot-Embossing Process","52nd International Conference on Electron, Ion, and Photon BeamTechnology andNanofabrication (EIPBN)",,,,,,2008,
"Y. Hirai,Y. Onishi,T. Tanabe,M. Shibata,T. Iwasaki,Y. Iriye","Pressure and resist thickness dependency of resist time evolutions profiles in nanoimprint lithography",,"Microelectronic Engineering",,"Vol. 85","No. 5","pp. 842?845",2008,
"Y.Onishi,Y.Hirai,高木秀樹,M.Takahashi,T.Tanabe,R.Maeda,Y.Iriye","Numerical and Experimental Analysis of Intermittent Line-and-Space Patterns in Thermal Nanoimprint",,"Japanese Journal of Applied Physics",,"Vol. 47","No. 6","pp. 5145-5150",2008,
"H. Takagi,M. Takahashi,R. Maeda,Y. Onishi,Y. Iriye,T. Iwasaki,Y. Hirai","Experimental and numerical analyses on recovery of polymer deformation after demolding in the hot embossing process",,"Journal of Vacuum Science and Technology B",,"Vol. 26","No. 6","pp. 2399-2403",2008,
"Y.Hirai,Y.Onishi,T.Tanabe,M.Nishihata,T.Iwasaki,Y.Iriye","Time Dependent Analysis of the Resist Deformation in Thermal Nanoimprint",,"Journal of Vacuum Science and Technology B",,"Vol. 25","No. 6","pp. 2341?2345",2007,
"高木秀樹,M.Takahashi,R.Maeda,Y.Onishi,Y.Iriye,T.Iwasaki,Y.Hirai","Analysis of Time Dependent Polymer Deformation Based on a Viscoelastic Model in Thermal Imprint Process","33rd International Conference on Micro and Nano Engineering (MNE)",,,,,,2007,
"田辺聡明,大西有希,柴田真由子,川田博昭,平井義彦","熱ナノインプリントにおけるレジスト形状の時 間変形解析（圧力, 初期膜厚依存性）","第68回応用物理学会学術講演会",,,,,,2007,
"Y.Hirai,Y.Onishi,T.Tanabe,M.Nishihata,T.Iwasaki,Y.Iriye","Time DependentAnalysis of the Resist Deformation in Thermal Nanoimprint","51st International Conference on Electron, Ion, and Photon Beam Technology and Nanofabrication (EIPBN)",,,,,,2007,
"大西有希,岩崎拓也,入江康郎,西畑雅由,平井義彦","熱ナノインプリントにおけるレジスト形状の時間変形解析I（シミュレーション）","第67回応用物理学会学術講演会",,,,,,2007,
"田辺聡明,西畑雅由,大西有希,川田博昭,平井義彦","熱ナノインプリントにおけるレジスト形状の時間 変形解析II（実験）","第67回応用物理学会学術講演会",,,,,,2007,
"大西有希,平井義彦,高木秀樹,高橋正春,田辺聡明,前田龍太郎,入江康郎","熱ナノインプリントにおけ るポリマーの変形解析","第２０回計算力学講演会",,,,,,2007,
"高木秀樹,高橋正春,前田龍太郎,大西有希,入江康郎,岩崎拓也,平井義彦","ナノインプリント解析シス テム用材料データベースの開発","2007年度精密工学会秋季大会学術講演会",,,,,,2007,
"Y.Onishi,高木秀樹,Y.Hirai, M,Takahashi,R.Maeda,T.Tanabe,Y.Iriye","Numerical and Experimental Analysis of Intermittent Line-and-Space Patterns in Thermal Nanoimprint","20th International Microprocesses and Nanotechnology Conference (MNC)",,,,,,2007,
"大西有希,高木秀樹,高橋正春,前田龍太郎,入江康郎,岩崎拓也","粘弾性体材料モデルを用いた熱ナノ インプリントの有限要素解析手法","第24回センサ・マイクロマシンと応用システムシンポジウム",,,,,,2007,
"Y.Hirai,Y.Onishi,T.Tanabe,M.Shibata,T.Iwasaki,Y.Iriye","Pressure and Resist Thickness Dependency of Resist Time Evolution profiles in Nanoimprint Lithography","33rd International Conference on Micro and Nano Engineering (MNE)",,,,,,2007,