"Akio Sayano,Kazuo Shinozaki,Hiroyuki Ohshima,Kouichi Yasuda,Takaaki?Tsurumi","Variations in the Hamaker constant of hematite particles in water",,"Coll. & Surfaces A: Physicochemical and Eng. Aspects",,"vol. 654",,,2022,June
"宮崎広行,安田公一,吉澤友一","圧子圧入（IF)法によるセラミックスの破壊じん性試験法ー信頼性向上と国際標準化への取り組みー",,"シンセオロジー",,"Vol. 13","No. 1","pp. 29-44",2021,Jan.
"Yujia Huang,Kouichi Yasuda,Chunlei Wan","Intercalation: Constructing Nanolaminated Reduced Graphen Oxide/ Silica Ceramics for Lightweight and Mechanically Reliable Electromagnetic Interference Shielding Applications",,"Applied Materials and Interfaces",,"Vol. 12","No. 49","pp. 55148-55156",2020,Jan.
"Chunfu LIN,Takashi TANAKA,Akio NISHIYAMA,Tadashi SHIOTA,Osamu SAKURAI,Naoki WAKIYA,Kazuo SHINOZAKI,Kouichi YASUDA","Effect of deposition conditions and buffer layers on amorphous or polytype phase formation in Al2O3 thin films by chemical vapor deposition using tri-methyl aluminum",,"J. Ceram. Soc. Japan","The Ceramic Society of Japan","Vol. 127","No. 6","pp. 443-450",2019,June
"安田公一","複合多孔体強度信頼性評価方法 はじめに，プレテスト，次年度の計画．おわりに",,"平成３０年度省エネルギー等国際標準開発【省３１】固体酸化物形燃料電池セル用セラミックス材料の特性試験方法に関する国際標準化 成果報告書",,"Vol. 1","No. 1","pp. p32 & p43 & p62-64 & p65",2019,Feb.
"安田公一","複合多孔体強度信頼性評価方法 セラミックスのクリープ変形についての文献調査",,"平成３０年度省エネルギー等国際標準開発【省３１】固体酸化物形燃料電池セル用セラミックス材料の特性試験方法に関する国際標準化 成果報告書",,"Vol. 1","No. 1","pp. p33 & p68-100",2019,Feb.
"Fan-Jie FENG,Kouichi YASUDA","Fractography of Al2O3 and Si3N4 Ceramics Fractured in Torsion","The  43rd International Conference and Exposition on Advanced Ceramics and Composites,","Abstract book of the 43rd International Conference and Exposition on Advanced Ceramics and Composites",,"Vol. 43","No. ICACC-S11-013-2019","pp. 27",2019,Jan.
"Akio Sayano,Tadashi Shiota,Akio Nishiyama,Kouichi Yasuda,Kazuo Shinozaki","Apparent zeta potential of nano-porous Al2O3 film deposited on different substrates in streaming potential method",,"Journal of Materials Science","Springer","Vol. 53","  Issue 24","pp. 16232-16242",2018,Aug.
"Dyah Yunitasari,Kouichi Yasuda","Fracture toughness measurement on anorthite ceramics by ball on three balls method","The 6th Int'l Conf. on the Characterization and Control of Interfaces for High Quality Advanced Materials (ICCCI2018) and the 54th Summer Symposium on Powder Technology","Abstract book of the 6th Int'l Conf. on the Characterization and Control of Interfaces for High Quality Advanced Materials (ICCCI2018) and the 54th Summer Symposium on Powder Technology",,"Vol. 1","No. P-B-09","pp. 228",2018,July
"安田公一","焼結",,"粉体の表面処理・複合化技術集大成 ?基礎から応用まで?","テクノシステム","Vol. 1","No. 1.14","pp. 159-165",2018,July
"Yujia Huang,Chunlei Wan,Kouichi Yasuda","Synthesis and Mechanical Properties of Graphene/SiO2 Layered Nanocomposites Prepared by Intercalation Method","The 6th Int'l Conf. on the Characterization and Control of Interfaces for High Quality Advanced Materials (ICCCI2018) and the 54th Summer Symposium on Powder Technology","Abstract book of the 6th Int'l Conf. on the Characterization and Control of Interfaces for High Quality Advanced Materials (ICCCI2018) and the 54th Summer Symposium on Powder Technology",,"Vol. 1","No. P-B-05","pp. 199",2018,July
"Kouichi YASUDA,Nagatoshi OKABE,Manabu TAKAHASHI,Sawao HONDA,Hideki KITA,Satoshi TANAKA,Takashi AKATSU,Seiichi TARUTA,Hiroyuki MUTO,Hiroyuki Miyazaki,Nobuhiro Shinohara(,Shuichi YAMAMOTO,Takashi ONO,Hiroshi OHNISHI,Yosuke TAKAHASHI,Takeshi MITSUOKA,Masahiro Takanashi,Iwao Kawashima(,Atsushi Sugai,Masahiro Asayama","Application of Weibull Statistics to Strength Data for Porous Fine Ceramics","The 6th Int'l Conf. on the Characterization and Control of Interfaces for High Quality Advanced Materials (ICCCI2018) and the 54th Summer Symposium on Powder Technology","Abstract book of the 6th Int'l Conf. on the Characterization and Control of Interfaces for High Quality Advanced Materials (ICCCI2018) and the 54th Summer Symposium on Powder Technology",,"Vol. 1","No. 1-III-E-06","pp. 144",2018,July
"Fan-Jie Feng,Kouichi Yasuda","Torsion Strength Measurement of Engineering Ceramics",,"Materials Science Forum",,"Vol. 922",,"pp. 110-115",2018,May
"本堂剛,安田公一,若井史博,田中諭","アルミナセラミックスの焼結時の粗大欠陥成長の解明","日本セラミックス協会2018年会","日本セラミックス協会2018年会講演予稿集",,"Vol. 1","No. 1D24",,2018,Mar.
"林 俊甫,西山昭雄,塩田忠,安田公 一,篠崎和夫","Al(CH3)3とO2を用いたMOCVD 法によるAl2O3製膜に及ぼすH2添加の影響","日本セラミックス協会2018年年会","日本セラミックス協会2018年年会要旨集",,,,,2018,Mar.
"Kouichi Yasuda","Influence of Linearity in Weibull Plot on Accuracy of Parameter Estimation","6th International Symposium on advanced Ceramics","Abstract book of 6th International Symposium on advanced Ceramics",,,"No. A13-11",,2018,Mar.
"安田公一","強度信頼性評価試験方法 はじめに，おわりに",,"平成29年度省エネルギー等国際標準開発，ファインセラミックス薄板基板の破壊強度試験法に関する国際標準化 成果報告書",,"Vol. 1","No. 1","pp. p1 & P40",2018,Feb.
"安田公一","強度信頼性評価試験方法",,"平成29年度政府戦略分野に係わる国際標準化活動, 固体酸化物形燃料電池セル用セラミックス材料の界面強度に関する国際標準化  成果報告書",,"Vol. 1","No. 1","pp. 195-326",2018,Feb.
"KOUICHI YASUDA,S.Tsutsumi","Challneges in Development of Easy-to-use Torsion Test MEthod for BIoceramics : Toward ISO Standard Proposal","41Th International Conference and Exposition on Advanced Ceramics and Composites","Ceramic Engineering and Science Proceedings, Volume 38, Issue 2, pp247- 260, Edited by Jonathan Salem, Jerry C. LaSalvia, Roger Narayan and Dongming Zhu ? 2018 The American Ceramic Society",,"Vol. 38","No. ICACC-PACRIM-043-2017","pp. 247-260",2018,Feb.
"Tsuyoshi Hondo,Kouichi Yasuda,Fumihiro Wakai,Satoshi Tanaka","Influence of binder layer of spray-dried granules on occurrence and evolution of coarse defects in alumina ceramics during sintering",,"Journal of the European Ceramic Society",,"Vol. 38","No. 4","pp. 1846-1852",2018,Feb.
"安田公一","多孔体強度データのワイブル統計解析 ISO NP23102（TCNP1704）","ISO講演会 ISO/TC206での標準化の状況",,,,,,2018,Feb.
"Kouichi YASUDA,Toshiyuki KAWANO,Masanori KIKUCHI,Mamoru AIZAWA,Kanji TSURU,Sadami TSUTSUMI","Validity check of easy-to-use torsion test method for bioceramics",,"Journal of Asian Ceramic Societies",,,,"pp. 1-11",2018,Feb.
"Sawao HONDA,Hiroshi OHNISHI,Takashi ONO,Hideki KITA  Manabu TAKAHASHI,Yosuke TAKAHASHI,Satoshi TANAKA),Seiichi TARUTA,Takeshi MITSUOKA ) Hiroyuki MUTO,Kouichi YASUDA,Shuichi YAMAMOTO,Yoichi Yoshiuzaw","Bending Strength Test for Porous Ceramics with Various Pore Structure","The  42nd International Conference and Exposition on Advanced Ceramics and Composites,","Abstract book of the 42nd International Conference and Exposition on Advanced Ceramics and Composites",,"Vol. 42","No. ICACC-S9-031-2018","pp. 63",2018,Jan.
"安田 公一","WG6 モノリシックセラミックス/機械的性質",,"JFIC ISO/TC206会報",,"Vol. 25",,"pp. 29-30",2018,Jan.
"安田 公一","将来提案 多孔体強度データのワイブル統計解析",,"JFIC ISO/TC206会報",,"Vol. 25",,"pp. 62-64",2018,Jan.
"Kouichi YASUDA","Production Root Technology has Another ACE (Applicability, Cost Effciency, and Environmental Friendly)","The  42nd International Conference and Exposition on Advanced Ceramics and Composites,","Abstract book of the 42nd International Conference and Exposition on Advanced Ceramics and Composites",,"Vol. 42","No. ICACC-S11-016-2018","pp. 22",2018,Jan.
"Kouichi YASUDA,Nagatoshi OKABE,Manabu TAKAHASHI,Sawao HONDA,Hideki KITA,Satoshi TANAKA,Takashi AKATSU,Seiichi TARUTA,Hiroyuki MUTO,Hiroyuki Miyazaki,Nobuhiro  Shinohara,Shuichi YAMAMOTO,Takashi ONO,Hiroshi OHNISHI,Yosuke TAKAHASHI,Takeshi MITSUOKA,Masahiro Takanash,Iwao Kawashima,Atsushi Sugai,Masahiro Asayama","Weibull Statistics for Strength Data of Porous Ceramics - ISO Proposal ?","The  42nd International Conference and Exposition on Advanced Ceramics and Composites,","Abstract book of the 42nd International Conference and Exposition on Advanced Ceramics and Composites",,"Vol. 42","No. ICACC-S9-030-2018","pp. 63",2018,Jan.
"安田 公一,田中 諭,内藤 牧男","CIP成形体の均質化過程に関する確率論","大阪大学接合科学研究所 平成２９年度共同研究成果発表会","大阪大学接合科学研究所 平成２９年度共同研究成果発表会 講演概要集",,,,"pp. 8-11",2017,Nov.
"Tsuyoshi HOND,Kouichi YASUDA,Fumihiro WAKAI,Satoshi Tanaka","Micro CT observation of structural change from green compact to sintered ceramics","The 34th International Japan-Korea Seminar on Ceramics,","The proceeding of the  34th International Japan-Korea Seminar on Ceramics,",,"Vol. 34","No. C-24",,2017,Nov.
"安田 公一","４．４ 無機材料",,"日本機械学会120周年記念『日本機械学会 最近10年のあゆみ』（２００７−２０１６）",,"Vol. 3 最近10年の部門活動","No. 4 機械材料・材料加工部門","pp. 4.4 無機材料",2017,Nov.
"Kouichi Yasuda","Influence of shape parameter on linearity in 2-parameter Weibull plot","The 34th International Japan-Korea Seminar on Ceramics,","The proceeding of the  4th International Japan-Korea Seminar on Ceramics,",,"Vol. 34","No. C-14",,2017,Nov.
"Kouichi Yasuda","Toughening of Inorganic Composite Materials",,"Journal of the Technical association of Refractories, Japan",,"Vol. 37","No. 3","pp. 138-152",2017,Oct.
"Kouichi Yasuda","Test method for torsion strength of porous bioactive ceramics under in-vivo-mimicking circumstances","ISO technical committee No.150 (bioceramics) Plenary meeting, WG3",,,,,,2017,Sept.
"Kouichi YASUDA","ISO規格原案 “Fine ceramics (advanced ceramics, advanced technical ceramics) ? Weibull statistics for strength data of porous ceramics”",,"ISO NP23102 (TC206 N1708)",,,"No. NP23102 (TC206 N1708)","pp. 1-7",2017,Sept.
"本堂 剛,安田公一,若井史博,田中 諭","成形方法に由来する不均一構造が緻密化挙動に与える影響","第30回日本セラミックス協会秋季シンポジウム","第30回日本セラミックス協会秋季シンポジウム講演予稿集",,"Vol. 30","No. "J25","pp. 1-2",2017,Sept.
"安田公一,大西宏司,小野孝,北英紀,高橋学,高橋洋佑,田中諭,樽田誠一,本多沢雄,光岡健,武藤浩行,山本周一,吉澤友一","各種のセラミックス多孔体の曲げ強度分布","第30回日本セラミックス協会秋季シンポジウム","第30回日本セラミックス協会秋季シンポジウム講演予稿集",,"Vol. 30","No. 3L04","pp. 1-2",2017,Sept.
"本堂 剛,安田公一,若井史博,田中 諭","成形方法に由来する不均一構造が緻密化挙動に与える影響","バルクセラミックスの信頼性に関するワークショップ（第6回バルクセラミックス若手セミナーを兼ねる））","バルクセラミックスの信頼性に関するワークショップ予稿集",,,,"pp. 1",2017,Sept.
"安田公一,菊池正紀,相澤 守,都留寛治,堤 定美","バイオセラミックスの簡易ねじり強さ試験法の妥当性の検討",,"日本機械学会2017年度年次大会 講演論文集（2017.9.3-6（さいたま））",,"Vol. 17","No. 1","pp. 1-5",2017,Sept.
"Kouichi YASUDA","Linearity Fluctuation in Weibull Plot for Limited Number of Strength Data","International Union of Materials Research Societies ? The 15th International Conference on Advanced Materials (IUMRS-ICAM2017)","Abstract book of International Union of Materials Research Societies ? The 15th International Conference on Advanced Materials (IUMRS-ICAM2017)",,,"No. B6-029-001","pp. 1",2017,Aug.
"Kouichi YASUDA","ISO規格原案 “Test method for torsion strength of porous bioactive ceramics under in-vivo-mimicking circumstances”",,"ISO TC150・SC 1, NXXXX",,,"No. SC 1, NXXXX","pp. 1-20",2017,July
"Kouichi Yasuda","Weibull statistics for strength data of porous ceramics","ISO technical committee No.206 (Fine ceramics) Plenary meeting, WG12",,,,,,2017,July
"安田公一","JIS規格素案 『ファインセラミックス多孔体の曲げ強さデータのワイブル統計解析法』",,"日本工業規格(案) JIS R XXXX",,,"No. R XXXX","  1-13",2017,June
"安田公一","JIS解説案 『ファインセラミックス多孔体の曲げ強さデータのワイブル統計解析法 解説』",,"日本工業規格( 解説（案) JIS R XXXX",,,"No. R XXXX","  1-20",2017,June
"Kouichi YASUDA","Influence of data set size on linearity in 2-parameter Weibull plot","THe 12th Pacific Rim Conference on Ceramic and Glass Technology","Abstractbook of THe 12th Pacific Rim Conference on Ceramic and Glass Technology",,"Vol. 12","No. 1","pp. 79",2017,May
"安田公一,菊池正紀,相澤 守,都留寛治,堤 定美","バイオセラミックスの簡易ねじり強さ試験法のラウンドロビン試験","日本セラミックス協会2017年年会","日本セラミックス協会2017年年会講演予稿集",,"Vol. 1","No. 3H21","pp. 1",2017,Mar.
"西本忠幹,上原佑介,岩?謙一郎,小柳潤,安盛敦雄,安田公一","ソーダ石灰ガラスに働く熱応力のき裂進展挙動による評価","日本セラミックス協会2017年年会","日本セラミックス協会2017年年会講演予稿集",,"Vol. 1","No. 1C18","pp. 1",2017,Mar.
"B.Jang,K.Yasuda,H.T.Kim","Thermal and Mechanical Properties of ZrO2-Y3O3 Thermal Barrier Coatings for  Long Term Use at High Temperature","The 18th International Symposium on Eco-materials PRocessing and Design","Abstract book of he 18th International Symposium on Eco-materials Processing and Design",,"Vol. 18","No. EI2-6","pp. 112-113",2017,Feb.
"安田公一","強度信頼性評価試験方法",,"平成28年度政府戦略分野に係わる国際標準化活動, 固体酸化物形燃料電池セル用セラミックス材料の界面強度に関する国際標準化  成果報告書",,"Vol. 1","No. 1","pp. 55-72, 98-203",2017,Feb.
"F.J.Feng,K.Yasuda","Torsion Strength Measurement of Engineering Ceramics","The 18th International Symposium on Eco-materials PRocessing and Design","Abstract book of he 18th International Symposium on Eco-materials Processing and Design",,"Vol. 18","No. E2-10","pp. 115",2017,Feb.
"安田公一","ねじり試験",,"平成28年度政府戦略分野に関わる国際標準化活動 バイオセラミックスの生体摸倣環境中での評価方法に関する国際標準化成果報告書",,"Vol. 1","No. 1","pp. 23-65,90",2017,Feb.
"K.Yasuda","Data Scattering Simulation on 2-parameter Weibull PLot","The 18th International Symposium on Eco-materials PRocessing and Design","Abstract book of he 18th International Symposium on Eco-materials Processing and Design",,"Vol. 18","No. E2-12","pp. 116",2017,Feb.
"T.Hondo,K.Yasuda,F.Wakai,S.Tanaka","Influence of Granule Characteristics on Structural Change during Sintering","The 18th International Symposium on Eco-materials PRocessing and Design","Abstract book of he 18th International Symposium on Eco-materials Processing and Design",,"Vol. 18","No. E2-3","pp. 109-110",2017,Feb.
"KOUICHI YASUDA,S.Tanaka,M.Naito","Collapse Probability of Granules in Ceramic Powder Compact during Cold Isostatic Pressing","41Th International Conference and Exposition on Advanced Ceramics and Composites","Abstract Book of 41Th International Conference and Exposition on Advanced Ceramics and Composites",,"Vol. 41","No. ICACC-S11-018-2017","pp. 28",2017,Jan.
"KOUICHI YASUDA","Linearity Condition on Weibull Plot of bending Strength Data of Porous Ceramics","41Th International Conference and Exposition on Advanced Ceramics and Composites","Abstract Book of 41Th International Conference and Exposition on Advanced Ceramics and Composites",,"Vol. 41","No. ICACC-S9-015-2017","pp. 19",2017,Jan.
"S.Honda,KOUICHI YASUDA,T.Ono,H.Kita,M.Takahashi,Y.Takahashi,S Tanaka,S.Taruta,T.Mitsuoka,H.Muto,S.Yamamoto,Y.Yoshizawa","Bending Strength Test of Porous Ceramics  using Samll SIze Specimen","41Th International Conference and Exposition on Advanced Ceramics and Composites","Abstract Book of 41Th International Conference and Exposition on Advanced Ceramics and Composites",,"Vol. 41","No. ICACC-S9-014-2017","pp. 19",2017,Jan.
"B.Jang,K.Yasuda,S.Kim,Y.Oh,H.Kim","Thermal and Mechanical Properties of ZrO2-Y2O3 Thermal Barrier Coating by THermal Exposure","THe 41th Internatioanl Conference and Exposition on Advanced Ceramics and Composites","Abstract book of tHe 41th Internatioanl Conference and Exposition on Advanced Ceramics and Composites",,"Vol. 41","No. ICACC-S2-005-2017","pp. 10",2017,Jan.
"安田 公一","WG6 モノリシックセラミックス/機械的性質",,"JFIC ISO/TC206会報",,"Vol. 24",,"pp. 24-25",2017,Jan.
"安田 公一","将来提案 多孔体強度データのワイブル統計解析",,"JFIC ISO/TC206会報",,"Vol. 24",,"pp. 61-64",2017,Jan.
"Kouichi Yasuda","Numerical Simulation for Linearity in Weibull Plots of Porous Ceramics Strength Data","26th Annual Meeting of MRS-Japan 2016","Abstracts of 26th Annual Meeting of MRS-Japan 2016",,"Vol. 26","No. D1-021-011","pp. 1",2016,Dec.
"Kouichi Yasuda,Satoshi Tanaka,Makio Naito","Stocahsitc Estimation on  Granule Collapse in Powder Compact under Isostatic Pressure","The 33rd International Korea-Japan Seminar on Ceramics","Abstract Book of the 33rd International Korea-Japan Seminar on Ceramics",,"Vol. 33","No. 1","pp. 152",2016,Nov.
"Masanori KIKUCHI,Manabu AIZAWA,Kanji TSURU,Kouichi YASUDA,Sadami TSUTSUMI","International Standardization Proposals from Japan on Bioceramics","The 33rd International Korea-Japan Seminar on Ceramics","Abstract Book of the 33rd International Korea-Japan Seminar on Ceramics",,"Vol. 33","No. 1","pp. 60",2016,Nov.
"田中諭,安田公一,小野孝,北英紀,高橋学,高橋洋佑,樽田誠一,本多沢雄,光岡健,武藤浩行,山本周一,吉澤友一","マイクロCTによるセラミック多孔体の内部構造評価","第２９回日本セラミックス協会秋季シンポジウム","第２９回日本セラミックス協会秋季シンポジウム講演予稿集",,"Vol. 29","No. 3A15","pp. 1",2016,Sept.
"佐谷野顕生,塩田忠,安田公一,篠崎和夫","CSD法によりステンレス基材上に形成したアルミナ薄膜のゼータ電位","日本セラミックス協会 第29回秋季シンポジウム","日本セラミックス協会第29回秋季シンポジウム講演予稿集","日本セラミックス協会",,,,2016,Sept.
"?本堂 剛,加藤 善二,安田 公一,若井 史博,田中 諭","焼結時の粗大欠陥発達に及ぼす顆粒の性質の影響","第２９回日本セラミックス協会秋季シンポジウム","第２９回日本セラミックス協会秋季シンポジウム講演予稿集",,"Vol. 29","No. 2A24","pp. 1",2016,Sept.
"安田公一,小野孝,北英紀,高橋学,高橋洋佑,田中諭,樽田誠一,本多沢雄,光岡健,武藤浩行,山本周一,吉澤友一","高気孔率セラミックス多孔体の曲げ試験","第２９回日本セラミックス協会秋季シンポジウム","第２９回日本セラミックス協会秋季シンポジウム講演予稿集",,"Vol. 29","No. 3A16","pp. 2",2016,Sept.
"安田公一,田中 諭,内藤牧男","CIP 成形体中の顆粒の崩壊確率の定式化",,"日本機械学会2016 年度年次大会講演論文集",,"Vol. 16","No. S0420101","pp. 1-5",2016,Sept.
"塩田忠,安田公一","硬脆性破壊に伴うフォトンエミッション -フラクトルミネッセンス-",,"トライボロジスト","日本トライボロジー学会","vol. 61","no. 8","p. 531-538",2016,Aug.
"K.Yasuda,S.Tanaka,M.Naito","Stocahsitc Model for Ceramic granule Collapse during Cold Isostatic Pressing","The 9th Pacific Rim International Conference on Advanced Materials and Processing (PRICM9)","Proceeding s of the 9th Pacific Rim International Conference on Advanced Materials and Processing (PRICM9)",,"Vol. 9","No. 182","pp. 503-505",2016,Aug.
"K.Yasuda,S.Tanaka,M.Naito","Stocahsitc Model for Ceramic granule Collapse during Cold Isostatic Pressing","The 9th Pacific Rim International Conference on Advanced Materials and Processing (PRICM9)","Final Program of PRICM9",,"Vol. 9",,"pp. 40",2016,Aug.
"B.Jang,K.Yasuda,S.Kim,Y.Oh,H.Kim","Degradation and Mechanical Properties of ZrO2-4mol% Y2O3 Thermal Barrier Coatings","The 9th Pacific Rim International Conference on Advanced Materials and Processing (PRICM9)","Final Program of PRICM9",,"Vol. 9",,"pp. 32",2016,Aug.
"Kouichi Yasuda","Weibull statistics for strength data of porous ceramics at room temperature","ISO TC206  Plenary Meeting ISO standard  preliminary proposal","Plenary Meeting",,,,,2016,Aug.
"Kouichi Yasuda","Weibull statistics for strength data of porous ceramics at room temperature","ISO TC206 WG12 ISO standard  preliminary proposal","WG12",,,,,2016,Aug.
"Tsuyoshi Hondo,Zenji Kato,Kouichi Yasuda,Fumihiro Wakai,Satoshi Tanaka","Coarse pore evolution in dry-pressed alumina ceramics during sintering",,"Advanced Powder Technology",,"Vol. 27",,"pp. 1006-1012",2016,June
"S.Tanaka,T.Hondo,K.Yasuda,F.Wakai","Control of Mesoscale Structure Evolution in Alumina Ceramics","9th Interenational Conference on High Temperature Ceramic Matrix Compsoites / Global Forum on Advanced Materials and Technologies for Sustainable Development 2016","The abstract book of 9th Interenational Conference on High Temperature Ceramic Matrix Compsoites / Global Forum on Advanced Materials and Technologies for Sustainable Development 2016",,"Vol. 1","No. G1-0012-2016","pp. 47",2016,June
"Kouichi Yasuda,Satoshi Tanaka,Makio Naito","A Stochastic Modeling for Ceramic Granule Collapse during Cold Isostatic Pressing","9th Interenational Conference on High Temperature Ceramic Matrix Compsoites / Global Forum on Advanced Materials and Technologies for Sustainable Development 2016","The abstract book of 9th Interenational Conference on High Temperature Ceramic Matrix Compsoites / Global Forum on Advanced Materials and Technologies for Sustainable Development 2016",,"Vol. 1","No. G1-0032-2016","pp. 86",2016,June
"S.Tanaka,K.Yasuda,H.Kita,M.Takahashi,Y.Takahashi,S.Honda,T.Mitsuoka,H.Muto,S.Yamamoto,Y.Yoshizawa","Internal Pore Structure i  Porous Ceramics Evaluated by Micro X-ray CT","9th Interenational Conference on High Temperature Ceramic Matrix Compsoites / Global Forum on Advanced Materials and Technologies for Sustainable Development 2016","The abstract book of 9th Interenational Conference on High Temperature Ceramic Matrix Compsoites / Global Forum on Advanced Materials and Technologies for Sustainable Development 2016",,"Vol. 1","No. G6-003-2016","pp. 44",2016,June
"K.Yasuda,H.Kita,M.Takahashi,Y.Takahashi,S.Tanaka,S.Honda,T.Mitsuoka,H.Muto,S.Yamamoto,Y.Yoshizawa","Application of 3-parameter Weibull Distribution to Porous Ceramics","9th Interenational Conference on High Temperature Ceramic Matrix Compsoites / Global Forum on Advanced Materials and Technologies for Sustainable Development 2016","The abstract book of 9th Interenational Conference on High Temperature Ceramic Matrix Compsoites / Global Forum on Advanced Materials and Technologies for Sustainable Development 2016",,"Vol. 1","No. G6-002-2016","pp. 43-44",2016,June
"Kouichi Yasuda,Satoshi Tanaka,Makio Naito","Stochastic analysis on ceramic granule collapse in powder compact during cold isostatic pressing",,"Advanced Powder Technology",,"Vol. 27",,"pp. 940-947",2016,June
"Tsuyoshi HONDO,Zenji KATO,Satoshi TANAKA,Fumihiro WAKAI,Kouichi YASUDA","Pore Formation in alumina ceramics prepared by dry-pressing method","EnCera2016","Abstract book fo EnCera2016",,"Vol. 1",,"pp. 57",2016,May
"安田公一,田中諭,内藤牧男","CIP成形中の顆粒の崩壊確率に関する理論解析","粉体工学会2016年度春季研究発表会","粉体工学会2016年度春季研究発表会講演要旨集",,"Vol. 1",,"pp. 08-109",2016,May
"Kouichi YASUDA,Satoshi TANAKA,Makio NAITO","Collapse Probability of Granules under Isostatic Pressure","EnCera2016","Absrtact Book of EnCera2016",,"Vol. 1",,"pp. 24",2016,May
"本堂 剛,加藤 善二,田中 善二,田中 諭,若井史博,安田公一","顆粒プレス成形体の不均質な焼結進行と粗大欠陥の発生","2016年日本セラミックス協会年会","2016年日本セラミックス協会年会講演予稿集",,,"No. 2I02",,2016,Mar.
"澀谷竜明,加藤 善二,田中 諭,安田公一","直接観察による単分散顆粒の成形体における顆粒変形分布の評価","2016年日本セラミックス協会年会","2016年日本セラミックス協会年会講演予稿集",,,"No. 1P014",,2016,Mar.
"安田公一,堤定美","多孔質バイオセラミックスの簡易ねじり試験法の妥当性の検証","2016年日本セラミックス協会年会","2016年日本セラミックス協会年会講演予稿集",,,"No. 3I29",,2016,Mar.
"安田公一","ICCCI2015シンポジウム印象記",,"粉体工学会誌",,"Vol. 53","No. 3","pp. 176",2016,Mar.
"安田公一","ねじり試験",,"平成27年度政府戦略分野に関わる国際標準化活動 バイオセラミックスの生体摸倣環境中での評価方法に関する国際標準化成果報告書",,"Vol. 1","No. 1","pp. 52-91,108",2016,Feb.
"安田公一","強度信頼性評価試験方法",,"平成27年度政府戦略分野に係わる国際標準化活動, 固体酸化物形燃料電池セル用セラミックス材料の界面強度に関する国際標準化  成果報告書",,"Vol. 1","No. 1","pp. 53-65, 89-179",2016,Feb.
"K.Yasuda,S.Tsutsumi","Easy-to-use Torsion Test Method for Bioceramics","40Th International Conference and Exposition on Advanced Ceramics and Composites","Abstract Book of 40Th International Conference and Exposition on Advanced Ceramics and Composites",,"Vol. 40","No. S5-037","pp. 184",2016,Jan.
"Tadashi Shiota,Yoshitaka Sato,Tetsuo Kishi,Kouichi Yasuda","Photon emission induced by brittle fracture of borosilicate glasses",,"Journal of Luminescence",,"Vol. 173",,"pp. 208-212",2016,Jan.
"S Tanaka,KOUICHI YASUDA,H.Kita,M.Takahashi,Y.Takahashi,S.Honda,T.Mitsuoka,H.Muto,S.Yamamoto,Y.Yoshizawa","Observation of internal structures in porous ceramics by micro x-ray CT","40Th International Conference and Exposition on Advanced Ceramics and Composites","Abstract Book of 40Th International Conference and Exposition on Advanced Ceramics and Composites",,"Vol. 40","No. S9-004","pp. 119",2016,Jan.
"K.Yasuda,S.Tanaka,M.Naito","The Change in Stress Filed in Ceramic Powder Compact during Cold Isostatic Pressing","40Th International Conference and Exposition on Advanced Ceramics and Composites","Abstract Book of 40Th International Conference and Exposition on Advanced Ceramics and Composites",,"Vol. 40","No. S11-021","pp. 187",2016,Jan.
"KOUICHI YASUDA,H.Kita,M.Takahashi,Y.Takahashi,S Tanaka,S.Honda,T.Mitsuoka,H.Muto,S.Yamamoto,Y.Yoshizawa","Statistical Analysis on Strength Data of Porous Ceramics","40Th International Conference and Exposition on Advanced Ceramics and Composites","Abstract Book of 40Th International Conference and Exposition on Advanced Ceramics and Composites",,"Vol. 40","No. S9-025","pp. 185",2016,Jan.
"S.Honda,KOUICHI YASUDA,H.Kita,M.Takahashi,Y.Takahashi,S Tanaka,T.Mitsuoka,H.Muto,S.Yamamoto,Y.Yoshizawa","Experimental Reliability on Bending Strength Test of Porous Ceramics","40Th International Conference and Exposition on Advanced Ceramics and Composites","Abstract Book of 40Th International Conference and Exposition on Advanced Ceramics and Composites",,"Vol. 40","No. S9-024","pp. 184",2016,Jan.
"S.Tanaka,T.Hondo,F.Wakai,K.Yasuda","Observation of development of internal pores in dry-pressed alumina ceramics during sintering","40Th International Conference and Exposition on Advanced Ceramics and Composites","Abstract Book of 40Th International Conference and Exposition on Advanced Ceramics and Composites",,"Vol. 40","No. S11-004","pp. 153",2016,Jan.
"Kouichi Yasuda,Satoshi Tanaka,Makio Naito","Numerical Simulation for Stress Distribution in Powder Compact during CIP","25th Annual Meeting of MRS-Japan 2015","Abstract Book of 25th Annual Meeting of MRS-Japan 2015",,"Vol. E3",,"pp. 001",2015,Dec.
"B.K.Jang,Kouichi Yasuda,H.T.Kim","Thermal and Mechanical Properties of Y2O3 Stabilized ZrO2 Thermal Barrier Coatings","25th Annual Meeting of MRS-Japan 2015","Abstract Book of 25th Annual Meeting of MRS-Japan 2015",,"Vol. E3",,"pp. 007",2015,Dec.
"Satoshi Tanaka,T.Hondo,Z.kato,Kouichi Yasuda,F.Wakai","Development of Coarse Defects in Alumina Ceramics during Sintering","25th Annual Meeting of MRS-Japan 2015","Abstract Book of 25th Annual Meeting of MRS-Japan 2015",,"Vol. E3",,"pp. 002",2015,Dec.
"安田公一,田中諭,内藤牧男","CIP成形中のセラミックス顆粒の崩壊過程のモデリング",,"第23回日本機械学会機械材料・材料加工部門技術講演会論文集",,"Vol. 23","No. 229","pp. 1-5",2015,Nov.
"Byung-Koog Jang,Kouichi Yasuda,Seong-Won Kim,Yoon-Suk Oh,H.T.Kim","Thermal-mechanical Properties of ZrO2-4mol% Y2O3 TBCs","The 32th International Japan-Korea Seminar on Ceramics","Abstract Book of the 32th International Japan-Korea Seminar on Ceramics",,"Vol. 32","No. AD-1","pp. 112",2015,Nov.
"Kouichi Yasuda,Satoshi Tanaka,Makio Naito","The Effect of Elastic Inhomogeneity on Stress Distribution in Powder Compact during Cold Isositatic Pressing","The 32th International Japan-Korea Seminar on Ceramics","Abstract Book of the 32th International Japan-Korea Seminar on Ceramics",,"Vol. 32","No. ST-7","pp. 57",2015,Nov.
"安田公一,堤定美","バイオセラミックスの簡易ねじり試験方法",,"第23回日本機械学会機械材料・材料加工部門技術講演会論文集",,"Vol. 23","No. 212","pp. 1-3",2015,Nov.
"安田公一","ものが壊れることとは？ エンジニアリングセラミックスの強度と破壊","東京都立立川高校出張講義","ものが壊れることとは？ エンジニアリングセラミックスの強度と破壊",,"Vol. 1",,"pp. 1-80",2015,Oct.
"Kouichi Yasuda,Satoshi Tanaka,Makio Naito","Continuum Model for Estimating Stress Distribution in Powder Compact during Cold Isostatic Pressing","The 9th International Conference on the Science and Technology for Advanced Ceramics","The abstract book of the 9th International Conference on the Science and Technology for Advanced Ceramics",,"Vol. 9","No. 2-Aa-05","pp. 22",2015,Oct.
"安田公一,田中諭,内藤牧男","冷間等方加圧成形時の成形体中の応力分布推定に関する連続体モデル","2015年度粉体工学会秋期研究発表会","2015年度粉体工学会秋期研究発表会講演要旨集",,"Vol. 2015",,"pp. 208",2015,Oct.
"Kouichi Yasuda,Motohisa Kitamoi,Masahiro Ibukiyama","Sintering of Hexagonal Boron Nitride with the Addition of Boron","the 11th Pacific Rim Conference of Ceramic Societies","Proceedings of the 11th Pacific Rim Conference of Ceramic Societies",,"Vol. 11","No. 1","pp. 470",2015,Sept.
"安田公一,北英紀,高橋学,高橋洋佑,多々見純一,田中諭,本多沢雄,光岡健,武藤浩行,山本周一,吉澤 友一","多孔質セラミックスの曲げ強度分布に関するラウンドロビン試験","第28回日本セラミックス協会秋季シンポジウム","第28回日本セラミックス協会秋季シンポジウム講演予稿集",,"Vol. 28",,"pp. 3H18",2015,Sept.
"澁谷竜明,加藤善二,田中諭,安田公一","フリーズドライ顆粒を用いて作製したアルミナ成形体および焼結体の構造評価","日本セラミックス協会第28回秋季シンポジウム","日本セラミックス協会第28回秋季シンポジウム講演予稿集",,"Vol. 28","No. 1","pp. 2B22",2015,Sept.
"安田公一","セラミックス多孔体の強度分布関数に関する考察","第１回日本セラミックス協会関東支部研究発表会","第１回日本セラミックス協会関東支部研究発表会講演要旨集",,"Vol. 31","No. C22","pp. 90",2015,Sept.
"安田公一","無機材料の複合強化",,"耐火物",,"Vol. 67","No. 9","pp. 427-443",2015,Sept.
"Kouichi Yasuda,Satoshi Tanaka,Makio Naito","Stochastic Analysis on Granule Collapse during Powder Compaction","The 5th International Conference on the Characterization and Control of Interfaces for High Quality Advanced Materials and the 5th Summer Symposium on Powder technology","Abstract Book of The 5th International Conference on the Characterization and Control of Interfaces for High Quality Advanced Materials and the 5th Summer Symposium on Powder technology",,,"No. AO-62","pp. 72",2015,July
"K. Yasuda,H. Kita,M. Takahashi,Y. Takahashi,J. Tatami,S. Tanaka,S. Honda,T. Mitsuoka,H. Muto,Y.Yoshizawa,S. Yamamoto","Round Robin Test on Bending Strength Distribution of Porous Ceramics","11th International Conference on Ceramic Materials and Components for Energy and Environmental Applications","Abstract Book of 11th International Conference on Ceramic Materials and Components for Energy and Environmental Applications",,"Vol. 11",,"pp. 69",2015,June
"安田公一","セラミックス信頼性技術の最新動向",,"セラミックス",,"Vol. 50","No. 6","pp. 485-488",2015,June
"Junichi Tatami,Masaki Katayama,Masahiro Ohnishi,Tsukaho Yahagi,Takuma Takahashi,Takahiro Horiuchi,Masahiro Yokouchi,Kouichi Yasuda,Do Kyung Kim,Toru Wakihara,Katsutoshi Komeya","Local Fracture Toughness of Si3N4 Ceramics Measured using Single-EdgeNotched Microcantilever Beam Specimens",,"J. Am. Ceram. Soc.",,"Vol. 98","No. 3","pp. 965-971",2015,Mar.
"安田公一","バルクセラミックス関連プロジェクトの提案検討の進捗状況","第2回超インターセラミックス研究会","第2回超インターセラミックス研究会",,,,,2015,Mar.
"安田公一,堤定美","バイオセラミックスの簡易ねじり試験法の提案","2015年日本セラミックス協会年会","2015年日本セラミックス協会年会講演予稿集",,,"No. 2J30",,2015,Mar.
"張  炳國,安田公一","ガスタービン用耐熱・耐食性酸化コーティングについて（機械的特性を中心に）","第2回超インターセラミックス研究会","第2回超インターセラミックス研究会",,,,,2015,Mar.
"安田公一","ねじり試験",,"平成26年度政府戦略分野に関わる国際標準化活動 バイオセラミックスの生体摸倣環境中での評価方法に関する国際標準化成果報告書",,"Vol. 1","No. 1","pp. 43-56, 61",2015,Feb.
"安田公一","強度信頼性評価試験方法",,"平成26年度新エネルギー等共通基盤整備促進事業, 燃料電池のシステム及びセル用材料の品質評価手法・特性試験法法・基準の開発  固体酸化物形燃料電池セル用セラミックス材料の特性試験方法 成果報告書",,"Vol. 1","No. 1","pp. 121-171, 220-233",2015,Feb.
"S.Tanaka,Kouichi Yasuda,H.KIta,M. Takahashi,Y.Takahashi,J.Tatami,S.Honda,H.Muto,S.Yamamoto","3 Dimensional Observation of Porous Ceramics by X-ray Computer Tomography","39th International Conference and Exposition on Advanced Ceramics and Composites","Abstracts of 39th International Conference and Wxposition on Advanced Ceramics and Composites",,"Vol. 39","No. 1","pp. 147",2015,Jan.
"Kouichi Yasuda","Estimation of State transition Probability Matrix of Coordination Number Distribution of particles in Ceramic Powder Compact","39th International Conference and Exposition on Advanced Ceramics and Composites","Abstracts of 39th International Conference and Wxposition on Advanced Ceramics and Composites",,"Vol. 39","No. 1","pp. 92",2015,Jan.
"Kouichi Yasuda","A Mechanical Model to Predict Phase Stress for Ceramics Laminates during Sintering","Energy Materials Nanotechnology Meeting on  Ceramics","Abstract Book of EMN Meeting on Ceramics",,"Vol. 1",,"pp. 87-88",2015,Jan.
"Kouichi Yasuda,T Nakayama,S.Tanaka","Laminatd Structure is one of the most important Industry Root Technologies in Ceramics","39th International Conference and Exposition on Advanced Ceramics and Composites","Abstracts of 39th International Conference and Wxposition on Advanced Ceramics and Composites",,"Vol. 39","No. 1","pp. 150",2015,Jan.
"Kouichi Yasuda,H.KIta,M. Takahashi,Y.Takahashi,J.Tatami,S.Tanaka,S.Honda,H.Muto,S.Yamamoto","Strength Distribution of Various Porous Ceramics","39th International Conference and Exposition on Advanced Ceramics and Composites","Abstracts of 39th International Conference and Wxposition on Advanced Ceramics and Composites",,"Vol. 39","No. 1","pp. 147",2015,Jan.
"S.Honda,Kouichi Yasuda,H.KIta,M. Takahashi,Y.Takahashi,J.Tatami,S.Tanaka,H.Muto,S.Yamamoto","Experimental Verification of BendingTest on Porous Ceramics","39th International Conference and Exposition on Advanced Ceramics and Composites","Abstracts of 39th International Conference and Wxposition on Advanced Ceramics and Composites",,"Vol. 39","No. 1","pp. 147",2015,Jan.
"安田公一","セラミックス多孔体の曲げ試験の健全性と曲げ強度分布の評価法",,"セラミックスデータブック2014",,"Vol. 42","No. 96","pp. 93-97",2014,Dec.
"Kouichi Yasuda","CHALLENGES IN MODEL DEVELOPMENT FOR ESTIMATING INTERNAL STRESS OF CERAMIC LAMINATES DURING SINTERING","38th Internatinal Conference on Advanced Ceramics and Composites","Ceramic Engineering and Science Proceedings, “Developments in Strategic Materials and Computations Design V”",,"Vol. 35","No. 8","pp. 349-357",2014,Dec.
"Kouichi Yasuda,Tadachika Nakayama,Satoshi Tanaka","STRESS ESTIMATION FOR MULTIPHASE CERAMICS LAMINATES DURING SINTERING","38th Internatinal Conference on Advanced Ceramics and Composites","Ceramic Engineering and Science Proceedings, “Advanced Processing and Manufacturing Technologies for Nanostructured and Multifunctional Materials”",,"Vol. 35","No. 6","pp. 101-106",2014,Dec.
"Kouichi Yasuda,Tadachika Nakayama,Satoshi Tanaka","Internal Stress Prediction of laminated Structure in Hybrid Materials","The 3rd Interenatinal Symposium on Hybrid Materials and Processing","The Abstract book of the 3rd International Symposium on Hybrid Materials and Processing",,"Vol. 3",,"pp. 45-46",2014,Nov.
"安田公一,中山忠親,田中諭","粘性体に基づくセラミックス積層材の焼結過程での応力評価モデル","第5回セラミックスエンジニアリングワークショップ","第5回セラミックスエンジニアリングワークショップ配付資料",,,,,2014,Nov.
"Kouichi Yasuda,Satashi Tanaka,Makio Naito","Stochastic model on granule collapse during cold isostatic pressing","The 31th International Korea -Jaoan Seminar on Cerramics","Abstract book of 31th International Korera -Japan Seminar on Ceramics",,"Vol. 31","No. ST-I02","pp. 111",2014,Nov.
"Satashi Tanaka,Tsuyoshi Hondo,Kouichi Yasuda","Evaluation of Internal defects and their coarsening during sintering in alumina ceramics system","The 31th International Korea -Jaoan Seminar on Cerramics","Abstract book of 31th International Korera -Japan  Seminar on  Ceramics",,"Vol. 31","No. ST-I04","pp. 113",2014,Nov.
"安田公一","応力拡大係数と破壊靱性","2014年バルクセラミックス若手セミナー（東工大応セラ研国内ワークショップを兼ねる）","若手セミナー資料",,"Vol. 3",,"pp. 1-7",2014,Sept.
"安田公一,北英紀,高橋学,高橋洋佑,多々見純一,本多沢雄,田中諭,武藤浩行,山本周一","多孔質セラミックスの曲げ強度に関するラウンドロビン試験","第27回日本セラミックス協会秋季シンポジウム","第27回日本セラミックス協会秋季シンポジウム講演予稿集",,"Vol. 27",,"pp. 3H17",2014,Sept.
"安田公一,田中諭,内藤牧男","静水圧成形体中の顆粒崩壊の確率論","第50回粉体工学会夏期シンポジウム","第50回粉体工学会夏期シンポジウム講演要旨集",,"Vol. 50",,"pp. 21",2014,Aug.
"Kouichi Yasuda","Proposal of Categories in Fracture Behavior of Porous Ceramics","International Union of Materials Reserach Societies - the 15th IUMRS International Conference in Asisa","Abstract of IUMRS-ICA2014",,"Vol. 15",,"pp. C4-029-008",2014,Aug.
"安田公一","バルクセラミックスの基礎と応用","日本技術士会近畿支部機械システム部会第47回講演会","日本技術士会近畿支部機械システム部会第47回講演会資料",,"Vol. 47",,"pp. 1-20",2014,July
"Kouichi Yasuda,Tadachika Nakayama,Satoshi Tanaka","A Model for Estimating Internal Stress during Sintering of Ceramic Multiphase Laminates",,"Key Engineering Materials",,"Vol. 616",,"pp. 14-18",2014,July
"安田公一","第2回バルクセラミックス将来戦略懇談会の概要報告","第3回バルクセラミックス将来戦略懇談会","第3回バルクセラミックス将来戦略懇談会資料",,"Vol. 3",,"pp. 1-3",2014,July
"安田公一","高信頼性セラミックスのためのCIP成形体の均質化に関する連続体力学アプローチ","2014年度第1回粉体材料設計研究会","2014年度第1回粉体材料設計研究会資料",,"Vol. 2","No. 1","pp. 3",2014,July
"Kouichi Yasuda,Younghui Zhou","Crack Formation during Sintering of Alumina Ceramic Laminates","2014 International Conference on Materials and Processing","2014 International Conference on Materials and Processing",,"Vol. 1",,"pp. ICMP2014-4923",2014,June
"安田公一,田中諭,内藤牧男","CIP成形体中の顆粒崩壊の確率論","粉体粉末冶金協会平成26年度春季大会","粉体粉末冶金協会講演概要集平成26年度春季大会",,"Vol. 1",,,2014,June
"J. Tatami,M. Katayama,T. Takahashi,T. Yahagi,T. Horiuchi,M. Yokouchi,K. Yasuda","Local Mechanical Properties of non-Oxide Ceramics Measured by Using Micro Cantilever Beam Specimens","4th Interenational Symposium on SiAlONs and non-oxides","Abstracts of 4th Interenational Symposium on SiAlONs and non-oxides",,"Vol. 4","No. P-19","  43",2014,May
"KOUICHI YASUDA,Keizo HIraishi,Kiyoteru Ishiko,Takumi takahashi,Junichi Tatami","Thermal Analysis of Silicon Nitride Ceramics up to 1700?C","4th Interenational Symposium on SiAlONs and non-oxides","Abstracts of  4th Interenational Symposium on SiAlONs and non-oxides",,"Vol. 4","No. A2-5","pp. 29",2014,May
"Kouichi Yasuda","Internal Stress Estimation of Ceramic Laminates during Sintering - Towards better understanding of durability for thermal Barrier Coating -","NIMS seminar",,,,,,2014,Apr.
"安田公一","微視的破壊過程から考え直すセラミックスの高靱化の可能性","第1回超インターセラミックス研究会","第1回超インターセラミックス研究会",,"Vol. 1",,"pp. 2",2014,Mar.
"安田公一,田中 諭,内藤牧男","繰り返し静水圧加圧におけるセラミックス成形体内の均質化過程に関する多重球殻モデルによる弾性解析",,"粉体工学会誌",,"Vol. 51",,"pp. 153-162",2014,Mar.
"安田公一,平石敬三,石子貴与晃","窒化ケイ素セラミックスの1700°C までの線熱膨張特性","2014年度日本セラミックス協会年会","2014年度日本セラミックス協会年会講演予稿集",,,,"pp. 2A11",2014,Mar.
"本堂剛,加藤善二,田中諭,安田 公一","マイクロ X線 CT を使用したアルミナの 焼結に伴う粗大 気孔 の 成長過程観の観察","2014年度日本セラミックス協会年会","2014年度日本セラミックス協会年会講演予稿集",,,,"pp. 2A02",2014,Mar.
"tadashi shiota,yoshitaka sato,kouichi yasuda","Time-resolved measurement of photon emission during fast crack propagation in three-point bending fracture of silica glass and soda lime glass",,"Applied Physics Letters","American Institute of Physics","vol. 104",,"  101912",2014,Mar.
"安田公一","高信頼性構造用セラミックス",,"石油学会ペテロテック",,"Vol. 37","No. 3","pp. 169-171",2014,Mar.
"安田公一","強度信頼性評価試験方法",,"平成25年度新エネルギー等共通基盤整備促進事業COB-44-271-10 燃料電池のシステム及びセル用材料の品質評価手法・特性試験法法・基準の開発報告書","一般社団法人 日本電機工業会，一般社団法人 日本ファインセラミックス協会","Vol. 1","No. 1","pp. 305-379",2014,Feb.
"J. Tatami,M. Katayama,T. Takahashi,T. Yahagi,T. Horiuchi,M. Yokouchi,K. Yasuda","Local Mechanical Properties of SI3N4 Ceramics Measured Using Very Small Cantilever Specimens","38th International Conference and Exposition on Advanced Ceramics and Composites","Abstracts of 34th International Conference and Ecposition on Advanced Ceramics and composites",,"Vol. 38","No. ICACC-S8-019-2014","  64",2014,Jan.
"Kouichi Yasuda,Tadachika Nakayama,Satoshi Tanaka","Crack-free Design Basis for Coating and Laminates in Eco Systems","15th International Symposium on Eco-materials Processing and Design","Abstracts of 15th International symposium on Eco-materials processing and design",,"Vol. 15","No. 1","pp. 134",2014,Jan.
"Kouichi Yasuda,中山忠親,田中諭","Stress Estimation for Multiphase Ceramics Laminates during SIntering","38th International Conference and Exposition on Advanced Ceramics and Composites","Abstracts of 34th International Conference and Ecposition on Advanced Ceramics and composites",,"Vol. 34","No. ICACC-S8-046-2014","pp. 146",2014,Jan.
"Kouichi Yasuda","Challenges in Model Development for Estimating Internal Stress of Ceramic Laminates during Sintering","38th International Conference and Exposition on Advanced Ceramics and Composites","Abstracts of 34th International Conference and Ecposition on Advanced Ceramics and composites",,"Vol. 34","No. ICACC-PRECS-006-2014","pp. 14",2014,Jan.
"K.Yasuda,T.Nakayama,S.Tanaka","A Model for Estimating Internal Stress during Sintering of Ceramic Multiphase laminates","5th International Symposium on Advanced Ceramics","Abstract Book of 5th International Symposium on Advanced Ceramics",,"Vol. 5","  B10-09","pp. 55",2013,Dec.
"J.Tatami,M.Katayama,T.Takahashi,T.Yahagi,T.Horiuchi,M.Yokouchi,K.Yasuda","Measurement of Local Mechanical Properties of Si3N4 Ceramics Using Very Small Cantilever Specimens","5th International Symposium on Advanced Ceramics","Abstract Book of 5th International Symposium on Advanced Ceramics",,"Vol. 5","  B10-03","pp. 44",2013,Dec.
"Kouichi Yasuda,Tadachika Nakayama,Satoshi Tanaka","The Theory for Estimating Stress during Sintering of Multiphase Laminates","The 30th Japan-Korea International Seminar on Ceramics","Proceedings of The 30th Japan-Korea International Seminar on Ceramics",,"Vol. 30","No. 1","  D02",2013,Nov.
"Hiroyuki Miyazaki,Yu-ichi Yoshizawa,Kouichi Yasuda","Round Robin on Indentation Fracture Resistance of Silicon Carbide for Small Ceramic Product",,"Ceramic Engineering and Science Proceedings",,"Vol. 34","No. 8","pp. 143-150",2013,Nov.
"Masaki Katayama,Junichi Tatami,Tokuma Takahashi,Tsukaho Yahagi,Takahiro Horiuchi,Masahiro Yokouchi,KOUICHI YASUDA","Evaluation of grain Boundary Fracture Toughness of Si3N4 Ceramics Using Very Small Specimens","The 30th Japan-Korea International Seminar on Ceramics","Proceedings of the 30th Japan-Korea International Seminar on Ceramics",,"Vol. 30","No. 1","  D02",2013,Nov.
"安田公一,呂ハイリン","緻密質アルミナ／多孔質アルミナ積層材料の焼結中の亀裂発生","第21回日本機械学会機械材料・材料加工技術講演会","第21回日本機械学会機械材料・材料加工技術講演会講演論文集",,"Vol. 21","No. 405","pp. 1-5",2013,Nov.
"Masaki Katayama,Junichi Tatami,Tokuma Takahashi,Tsukaho Yahagi,Takahiro Horiuchi,Masahiro Yokouchi,KOUICHI YASUDA","Evaluation of Grain Boundary Fracture Toughness of Si3N4 Ceramics  Using Very Small Specimens","5th Asia-Oceania Ceramic Federation Conference","Abstract of 5th Asia Oceania Ceramic Federation Conference",,"Vol. 5","No. AOCF-PA13","pp. 408",2013,Oct.
"KOUICHI YASUDA,Tadachika Nakayama,Satoshi Tanaka","Generalized Model For Estimating Stress Change During Sintering Of Ceramic Laminates","5th Asia-Oceania Ceramic Federation Conference","Abstract of 5th Asia Oceania Ceramic Federation Conference",,"Vol. 5","No. AOCF-0A9","pp. 395",2013,Oct.
"Kouichi Yasuda","Cracking during Sintering in Ceramic Laminated Structure  ? Towards better understanding of crack formation in ceramic devices and components -","ソウル市立大材料工学科セミナー",,,,,,2013,Oct.
"安田公一,中山忠親,田中諭","セラミックス積層材における焼結中の応力評価モデルの一般化","第26回日本セラミックス協会秋季シンポジウム","第26回日本セラミックス協会秋季シンポジウム講演予稿集",,"Vol. 26","No. 3Q19","pp. 1",2013,Sept.
"安田公一","社会への贈り物としてのバルクセラミックスの高信頼性化 ーまだ，できていないことの中にこそ，新しい知と技術が眠っているー","第20回人材設計研究会","第20回人材設計研究会プログラム",,"Vol. 20",,"pp. 1",2013,Sept.
"Hiroyuki Miyazaki,Yu-ichi Yoshizawa,Kouichi Yasuda","Improved accuracy of the measurements of indentation fracture resistance for silicon nitiride ceramics by the powerful optical microscopy",,"Ceramics International",,"Vol. 39",,"pp. 9499-9504",2013,Sept.
"田中諭,本堂剛,加藤善二,植松敬三,安田公一","アルミナセラミックス製造時における粗大欠陥形成原因","第26回日本セラミックス協会秋季シンポジウム","第26回日本セラミックス協会秋季シンポジウム講演予稿集",,"Vol. 26","No. 3Q15","pp. 1",2013,Sept.
"片山正巳,多々見純一,高橋拓実,矢矧束穂,堀内崇弘,横内正洋,安田公一","超微小試験片によるSI3N4セラミックスの強度測定","第26回日本セラミックス協会秋季シンポジウム","第26回日本セラミックス協会秋季シンポジウム講演予稿集",,"Vol. 26","No. 3Q18","pp. 1",2013,Sept.
"安田公一,呂ハイリン","セラミックス積層材料の焼結中の内部応力の評価","2013年度日本機械学会年次大会","2013年度日本機械学会年次大会学術講演論文集",,"Vol. 13-1","No. S042016","pp. 1-4",2013,Sept.
"安田公一","線型代数の基礎，像と核",,"2013年バルクセラミックス若手セミナー",,"Vol. 1",,"pp. 1-12",2013,Aug.
"Kouichi Yasuda,Fumitaka Takase,Yohtaro Matsuo","Stochastic analysis on coordination number distribution of particles during powder compaction",,"Advanced Powder Technology",,"Vol. 24",,"pp. 871-878",2013,Aug.
"安田公一","変動静水圧下におけるセラミックス成形体中の顆粒の崩壊過程","第４９回 粉体工学会 夏期シンポジウム講演会","第４９回 粉体工学会 夏期シンポジウム講演要旨集",,"Vol. 49",,"pp. 16",2013,July
"Kouichi Yasuda,Tadachika Nakayama","The First Approach to Estimate Internal Stress in New Ceramic Composites Made by Nano-second Pulsed Discharge Technology","The 2nd international GIGAKU conference in Nakagaoka","Abstracts of The 2nd international GIGAKU conference in Nakagaoka",,"Vol. 2","No. IO-8","pp. 58",2013,June
"Kouichi Yasuda,Lv Peiling","Verification of a Model for estimating Internal Stress in Ceramic Laminates","The 7th International Conference on Science and Technology of advanced Ceramics",,"Abstract of The 7th International Conference on Science and Technology of advanced Ceramics","Vol. 7","No. PP-077",,2013,June
"Hiroyuki Miyazaki,Yu-ichi Yoshizawa,Kouichi Yasuda","Round Robin on Indentation Fracture Resistance of Silicon Carbide Ceramics by using a Powerful Optical Microscope",,"Ceramics International",,"Vol. 39",,"pp. 611-617",2013,Apr.
"Kouichi Yasuda","Estimation of stress change during sintering in ceramic laminated structure ?towards better understanding of TBC coating - ,","Korean Institute of Ceramic Engineering and Technology",,,,,,2013,Apr.
"Lv Peiling,Yang Hanxiao,Camille Gazeau,Kouichi Yasuda","Estimation of stress generated during co-sintering of porous and dense alumina layers",,"Journal of the ceramics society of japan",,"Vol. 121","No. 4","pp. 338-343",2013,Apr.
"Kouichi Yasuda,Lv peiling","A Model for Stress Histry of Ceramic Laminates during Sintering",,"Materials Science Forum",,"Vol. 761",,"pp. 73-77",2013,Apr.
"Kouichi Yasuda,Taku Okamoto","Precise calibration of displacement vector map during superplastic deformation in tetragonal zirconia polycrystal",,"Materials Science Forum",,"Vol. 735",,"pp. 101-108",2013,Apr.
"安田公一,呂ハイリン","焼結中の積層材における内部応力の評価法","日本セラミックス協会２０１３年年会","日本セラミックス協会２０１３年年会予稿集",,,,"pp. 2C26",2013,Mar.
"安田公一","バルクセラミックスの破壊とフラクトグラフィー",,"セラミックス",,"Vol. 48","No. 1","pp. 33-37",2013,Jan.
"Kouichi Yasuda","A Model for Stress Histry of Ceramic Laminates during Sintering","The 14th International Sy,posium on Eco-Materials Processing and Design","Abstracts of the 14th International Sy,posium on Eco-Materials Processing and Design",,,"  C1-01-I","pp. 33",2013,Jan.
"安田公一","巻頭言 バルクセラミックスの信頼性革新の特集号によせて",,"セラミックス",,"Vol. 48","No. 1","pp. 2-3",2013,Jan.
"Hiroyuki Miyazaki,Yu-ichi Yoshizawa,Kouichi Yasuda","Round Robin on Indentation Fracture Resistance of Silicon Carbide for Small Ceramic Products","37th International Conference and Exposition on Advanced Ceramics and Composites","Abstracts of 37th International Conference and Exposition on Advanced Ceramics and Composites",,"Vol. 37","No. ICACC-S8-P115-2013","pp. 115",2013,Jan.
"多々見 純一,片山 正己,米屋 勝利,脇原 徹,矢矧 束穂,堀内 崇弘,横内 正洋,安田 公一","超微小試験片を用いたSi3N4セラミックスの粒界破壊靱性評価","第３回セラミックスエンジニアリングワークショップ","第３回セラミックスエンジニアリングワークショップ予稿集","日本セラミックス協会エンジニアリングセラミックス部会","Vol. 3",,"pp. 11",2012,Dec.
"安田公一,楊ガンショウ,呂ハイリン","セラミックス積層材の焼結中のきれつ発生","第２０回機械材料・材料加工技術講演会","第２０回機械材料・材料加工技術講演会論文集",,"Vol. 20",,"pp. 119",2012,Nov.
"KOUICHI YASUDA","A theory for stress estimation of ceramic laminates during sintering","The 29th International Korea-Japan seminar on Ceramics","The proceedings of the 29th  International Korea-Japan seminar on Ceramics",,"Vol. 29",,"pp. 43-44",2012,Nov.
"Lv Peiling,Yang Hanxiao,Camille Gazeau,Kouichi Yasuda","Co-sintering of 3-layered Laminate of Porous Alumina and Dense Alumina","International Conference on the Characterization and Control of Interfaces for high quality Advanced Materials","Abstrtact of the 4th International Conference on the Characterization and Control of Interfaces for high quality Advanced Materials",,"Vol. 4",,"pp. 98",2012,Sept.
"多々見純一,片山正己,米屋勝利,脇原徹,矢引束穂,堀内崇弘,横内正洋,安田公一","超微小試験片を用いたSi3N4セラミックスの粒界破壊靱性評価",,"日本セラミックス協会第25回秋季シンポジウム講演予稿集",,"Vol. 25","  3D19","pp. 1",2012,Sept.
"安田公一,楊がんしょう,呂ハイリン","焼結過程におけるセラミックス積層材料中の熱応力の評価",,"日本セラミックス協会第25回秋季シンポジウム講演予稿集",,"Vol. 25","  3D14","pp. 1",2012,Sept.
"安田公一","強度とその分布 ー基礎理論と評価方法ー",,"2012年バルクセラミックス若手セミナー",,"Vol. 1",,"pp. 1-12",2012,Sept.
"安田公一","定数係数線型微分方程式の解が，どうしてこのような形で表されるのか？",,"2012年バルクセラミックス若手セミナー",,"Vol. 1",,"pp. 1-4",2012,Sept.
"安田公一","解析力学におけるラグランジュ方程式を使ってみよう",,"2012年バルクセラミックス若手セミナー",,"Vol. 1",,"pp. 1-4",2012,Sept.
"安田公一,佐藤由隆","破壊表面積で規格化したシリカガラスのフラクトエミッション特性",,"日本機械学会2012年度年次大会講演論文集",,"Vol. 12","No. 1","pp. 1-3",2012,Sept.
"Kouichi Yasuda,Fumitaka Takase","Stochastic Analysis on the Coordination Number Distribution of Particles during Powder Compaction","International Conference on the Characterization and Control of Interfaces for high quality Advanced Materials","Abstrtact of the 4th International Conference on the Characterization and Control of Interfaces for high quality Advanced Materials",,"Vol. 4",,"pp. 63",2012,Sept.
"安田公一","無機材料",,"日本機械学会誌",,"Vol. 115","No. 1120","pp. 541-542",2012,Sept.
"安田公一","示差熱天秤",,"機械屋のための分析装置ガイドブック","コロナ社",,,"pp. 83-87",2012,Sept.
"吉野雅彦,大竹尚登,山本貴富喜,山中晃徳,中村吉男,安田公一,齊藤卓志,源関聡,津島将司,黒川悠,井上裕嗣,山?敬久,野崎智洋,鈴木俊明,梅原徳次,近藤行人,松村隆,楊明,月山陽介,益満秀治,赤上陽一,久住孝幸,上坂裕之,野老山貴行,品川一成,新保實,平山朋子,早川邦夫,坂井田喜久,鈴木清一,柏谷智","機械屋のための分析装置ガイドブック（日本塑性加工学会編）",,,"コロナ社",,,"pp. 167-177",2012,Aug.
"Kouichi Yasuda,Taku Okamoto","Precise calibration of displacement vector map during superplastic deformation in tetragonal zirconia polycrystal",,"11th International Conference on superplasticity in advanced materials",,"Vol. 11",,"p. 55",2012,July
"Kouichi Yasuda,Kazuhiro Uemura,Tadashi Shiota","A Fracture Analysis of Gadolinium-doped Ceria Ceramics to Improve Strength and Reliability",,"Ceramics Transaction",,"Vol. 230",,"pp. 255-263",2012,July
"Lv Peiling,Yang Hanxiao,Kouichi Yasuda","Co-sintering of a 3-layered ceramics structure",,"The 6th Interenational Conference on the Science and Technology for Advanced Ceramics",,,,"  1P-S-P54",2012,June
"安田公一,上村和裕","ガドリニウムドープセリアセラミックスの焼結","日本セラミックス協会2012年年会","日本セラミックス協会2012年年会予稿集",,"Vol. 1","No. 1E33","pp. 22",2012,Mar.
"Kouichi Yasuda","Application of Fracture Mechannics Analysis to Functional Ceramics",,"Abstract Book on the 1st International GIGAKU COnference in Nagaoka",,"Vol. 1","No. MO-3","pp. 49",2012,Feb.
"Kouichi Yasuda,Kazuhiro Uemira,Tadashi Shiota","Sintering and Mechanical Properties of Gadolinium-doped Ceria Ceramics",,"Journal of Physics:Conference Series",,"Vol. 339",,"pp. 012006",2012,Feb.
"安田公一","4.4 無機材料（4.4.1 セラミックス，ファインセラミックス，4.4.2 ガラス，4.4.3 セメント，コンクリート，4.4.4 耐火物，断熱材）",,"機械実用便覧 改訂第7版",,,,"pp. 281-289",2012,Jan.
"T.Okamoto,K.Yasuda,T.Shiota","Estimation Theory for Random Force Exerted on Grains during Superplastic Deformation of Ceramics",,"IOP Conf.Series: Materials Science and Engineering",,"Vol. 18",,"pp. 202007",2011,Dec.
"安田公一,上村和裕,塩田忠","破壊原因分析によるガドリニアドープセリアセラミックスの強度信頼性の向上","日本機械学会2011年度年次大会","日本機械学会2011年度年次大会講演論文集",,"Vol. 11","No. 1","pp. S042021",2011,Sept.
"安田公一,田中諭,安盛敦雄,篠?和夫","応力・ひずみの観点からみるバルクセラミックスの信頼性向上","日本セラミックス協会第24回秋季シンポジウム","日本セラミックス協会第24回秋季シンポジウム講演予稿集",,"Vol. 24",,"pp. 91",2011,Sept.
"塩田忠,佐藤由隆,安田公一","ガラス材料のき裂進展中に生じるフォトンエミッションの放出特性","日本機械学会2011年度年次大会","日本機械学会2011年度年次大会DVD-ROM論文集","日本機械学会",,,"  S042023",2011,Sept.
"多々見純一,吉尾紗良,脇腹徹,米屋勝利,目黒竹司,安田公一,荒巻賢治","エタノールに分散したカーボンナノチューブのブラウン運動","日本セラミックス協会第24回秋季シンポジウム","日本セラミックス協会第24回秋季シンポジウム講演予稿集",,"Vol. 24",,"pp. 94",2011,Sept.
"Kouichi Yasuda,Kazuhiro Uemira,Tadashi Shiota","Sintering and mechanical properties of gadolinium-doped ceria ceramics",,"Abstract book on the 4th international symposium on functional materials(ISFM2011)",,"Vol. 4",,"pp. 51",2011,Aug.
"安田公一","無機材料",,"日本機械学会誌",,"Vol. 114","No. 1113","pp. 583-584",2011,Aug.
"佐藤由隆,塩田忠,安田公一","高速時間分解計測によるシリカガラスにおける亀裂進展中のフォトンエミッション検出",,"日本機械学会論文集A偏",,"Vol. 77","No. 779","pp. 1028-1031",2011,July
"安田公一","超塑性材料のマイクロ変形モデル",,"日本塑性加工学会 マイクロ・ナノ加工分科会 第7回技術セミナー",,"Vol. 7","No. 4","pp. 1-59",2011,July
"Taku Okamoto,Kouichi Yasuda,Tadashi Shiota","Application of random walk theory to grain motion during superplastic deforamtion",,"Absdtract book on 2011 MSEC/NAMRX/ICM&P conference",,"Vol. 1",,"  54",2011,June
"Tadashi Shiota,Yoshitaka Sato,Kouichi Yasuda","Emission characteristics of photons during crack propagation in brittle fracture of silica glass","STAC5 and AMDI2","Abstract book of STAC5 and AMDI2",,,,,2011,June
"Kouichi Yasuda,Kazuhiro Uemira,Tadashi Shiota","Improvement of strength reliability of gaadolimia-doped ceria ceramics by fractography",,"Abstract book on fractography of glasses and ceramics VI",,"Vol. 7",,"  C21",2011,June
"安田公一","セラミックスの信頼性",,"長野県ファインセラミックス技術研究組合",,"Vol. 1",,"pp. 1-95",2011,June
"岡本拓,安田公一,塩田忠","部門表彰（優秀講演論文部門）『TZPセラミックスの超塑性変形における結晶粒子の運動の確率解析』",,"日本機械学会 機械材料・材料加工部門ニュースレター",,"Vol. 41",,"pp. 8-9",2011,May
"Sara Yoshio,Junichi Tatami,Tomohiro Yamakawa,Toru Wakihara,Katsutoshi Komeya,Takeshi Meguro,Kenji Aramaki,Kouichi Yasuda","Dispersion of Carbon Nanotubes in Ethanol by a Bead Milling Process",,"Carbon",,"Vol. 49",,"pp. 4131-4137",2011,May
"Taku Okamoto,Kouichi Yasuda,Tadashi Shiota","Grain Motion Statistics of Polycrystalline Zirconia during Superplastic Deformation",,"Scripta Materialia",,"Vol. 64",,"pp. 253-255",2011,Apr.
"Lv Peiling,C. Gazeau,T. Shiota,K.Yasuda","Application of Fractography Technique to Porous Alumina","日本セラミックス協会2011年年会","日本セラミックス協会2011年年会講演予稿集","日本セラミックス協会",,,"p. 89",2011,Mar.
"Yoshitaka Satou,tadashi shiota,KOUICHI YASUDA","Polyscale measurement of photon emission during brittle fracture of silica glass","2011 Japn-Taiwan Symposium on Polyscale Technologies for Biomedical Engineering and Enviroment Sciences","2011 Japan-Taiwan symposium on polyscale technologies for biomedical engineering and environmental sciences abstract book","Polyscale Technology Research Center",,,,2011,Mar.
"上村和裕,安田公一,塩田忠","ガドリニアドープセリアセラミックスの破壊原因の解析",,"日本機械学会論文集（A編）",,"Vol. 77","no. 775","pp. 535ー543",2011,Mar.
"Lv Peiling,KOUICHI YASUDA,tadashi shiota","Co-sintering between dense alumina and porous alumina","2011 Japan-Taiwan symposium on polyscale technologies for biomedical engineering and environmental sciences","2011 Japan-Taiwan symposium on polyscale technologies for biomedical engineering and environmental sciences abstract book","research institute of science and technology(RIST)",,,"p. 25",2011,Mar.
"Yoshitaka Satou,Tadashi SHIOTA,KOUICHI YASUDA","シリカガラスの破壊に伴うフォトンエミッションの雰囲気ガス圧力依存性","日本セラミックス協会2011年年会","日本セラミックス協会2011年年会講演予稿集","日本セラミックス協会",,,"p. 88",2011,Mar.
"Ryoichi Furushima,Yohtaro Matsuo,Tadashi Shiota,Kouichi Yasuda","Theoretical Estimation of Changes in Plane Elastic Waves due to Cylindrical Inclusions",,"Journal of Nondestructive Evaluation","Springer","vol. 30",,"p. 29-40",2011,Mar.
"塩田忠,安田公一","ガムテープ引き剥がし発光『光るガムテープ』体験学習","日本セラミックス協会2011年年会","日本セラミックス協会2011年年会講演予稿集","日本セラミックス協会",,,"p. 118",2011,Mar.
"安田公一,上村和裕,塩田忠","SOFC用ガドリニアドープセリアセラミックスの強度信頼性の向上",,"東京工業大学環境エネルギー機構第1回産学連携研究交流会予稿集",,,,"p. 61",2011,Jan.
"C. Gazeau,L. Peiling,T. Shiota,K. Yasuda","The Influence of Pore Size on 3-Point Bending Strength of Porous Alumina","第49回セラミックス基礎科学討論会","第49回セラミックス基礎科学討論会講演要旨集","日本セラミックス協会基礎科学部会",,,,2011,Jan.
"上村和裕,安田公一,塩田忠","ガドリニアドープセリアセラミックスの破壊原因の解析",,"第19回SOFC研究発表会講演要旨集",,"Vol. 19",,"Page 134",2010,Dec.
"安田公一","研究テーマ 『高効率エンジン用セラミックス材料の開発』および『原子炉用炭素材料』",,"社会・経済的視点から見た学内教員の環境エネルギー分野における研究活動の分析調査","東京工業大学 ソリューション研究機構 先進エネルギー国際研究センター",,,"pp. 27-30",2010,Nov.
"岡本拓,安田公一,塩田忠","TZPセラミックスの超塑性変形における結晶粒子の運動の確率解析","第１８回機械材料・材料加工技術講演会","日本機械学会第１８回機械材料・材料加工技術講演会論文集","日本機械学会",,,"  101",2010,Nov.
"tadashi shiota,yoshitaka sato,kouichi yasuda","Fracto-emission during unstable crack propagation in ceramics materials","3rd international congress on ceramics","Abstracts of 3rd international congress on ceramics","The ceramic society of Japan",,,"  S14-009",2010,Nov.
"Tomohiro Kobayashi,tomoyuki misaki,kazuhiro uemura,tadashi shiota,kouichi yasuda","The application of fractography to strength estimation of porous alumina","3rd international congress on ceramics","Abstracts of 3rd international congress on ceramics","The ceramic society of Japan",,,"  S14-P083",2010,Nov.
"佐藤由隆,塩田忠,安田公一","シリカガラスにおけるき裂進展中のフォトンエミッション計測","第１８回機械材料・材料加工技術講演会","日本機械学会第１８回機械材料・材料加工技術講演会論文集","日本機械学会",,,"  110",2010,Nov.
"taku okamoto,kouichi yasuda,tadashi shiota","Estimation theory for random force exerted on grains during superplastic deformation of ceramics","3rd international congress on ceramics","Abstracts of 3rd international congress on ceramics","The ceramic society of Japan",,,"  S14-035",2010,Nov.
"tadashi shiota,kouichi yasuda","Simultaneous measurement of the emission of photons and charged particles during brittle fracture",,"Materials Science and Engineering B","ELSEVIER","Vol. 173",,"pp. 248-252",2010,Oct.
"岡本 拓,安田公一,塩田 忠","セラミックス超塑性における粒子に働くランダム力の推定理論",,"日本機械学会2010年度年次大会講演論文集",,"Vol. 1",,"pp. 289-290",2010,Sept.
"御崎智之,小林知裕,上村和裕,塩田 忠,仲博律,大西宏司,安田公一","多孔質アルミナの強度評価における破面観察の適用",,"日本機械学会2010年度年次大会講演論文集",,"Vol. 1",,"pp. 291-292",2010,Sept.
"Hiroaki Takeda,Kensuke Mihara,Takuya Hoshina,Kouichi Yasuda,Takaaki Tsurumi","Material property - generation characteristics relationship for piezoelectric vibration based generator","ISAF-ECAPD 2010",,,,,,2010,Aug.
"岡本 拓,安田公一,塩田 忠","TZPセラミックスの超塑性変形における粒子流跡線のブラウン運動に基づく解析",,"日本機械学会論文集A編",,"Vol. 76","No. 766","pp. 680-681",2010,June
"安田公一,塩田忠","研究室公開における『力と遊ぼう』体験学習",,"セラミックス",,"Vol. 45","No. 4","pp. 285-288",2010,Apr.
"上村和裕,安田公一,塩田忠","ガドリニアドープセリアセラミックスの破壊源の同定",,"日本セラミックス協会2010年年会講演予稿集",,,,"pp. 298",2010,Mar.
"安田公一,塩田 忠","チョークの不思議な壊れ方",,"日本セラミックス協会2010年年会講演予稿集",,,,"pp. 144",2010,Mar.
"安田公一,岡本拓,塩田 忠","TZPセラミックスの超塑性変形における粒子流跡線の分解",,"日本セラミックス協会2010年年会講演予稿集",,,,"pp. 21",2010,Mar.
"安田公一","セラミックスのフラクトグラフィーと破壊靱性",,"最新 フラクトグラフィー ー各種材料の破面解析とその事例ー","テクノシステム",,,"pp. 345-359",2010,Mar.
"塩田忠,佐藤由隆,安田公一","シリカガラスの破壊の伴う粒子放出特性","第48回セラミックス基礎科学討論会","第48回セラミックス基礎科学討論会講演要旨集","日本セラミックス協会基礎科学部会",,,"p. 202",2010,Jan.
"上村和裕,安田公一,塩田忠","ガドリニアドープセリアセラミックスの破面解析",,"第18回SOFC研究発表会講演要旨集",,"Vol. 18",,"Page 160-161",2009,Dec.