"Yutaka NAKANO,Katsunori CHO,Takamasa HASE,Yuki MATSUMURA,Hiroki TAKAHARA","Experimental study of friction-induced noise generated from the printer fuser assembly (Generation mechanism and countermeasures)",,"Mechanical Engineering Journal",,"Vol. 11","Issue 2","page 23-00389",2024,Apr.
"中野 寛,吉田 尚史,大井 一浩,高原 弘樹","回転切削器具の振動モニタリングによる顎変形症手術支援に関する研究","Dynamics and Design Conference 2023","Proceedings of Dynamics and Design Conference 2023",,,,,2023,Aug.
"Yutaka Nakano,Satoru Sekikawa,Hiroki Takahara","Numerical Study of Chatter Control in End Milling Process by Workpiece Excitation","IUTAM Symposium on Nonlinear dynamics for design of mechanical systems across different length/time scales","Proceedings of 2023 IUTAM Symposium",,,,,2023,July
"稲葉 雅司,中溝 裕紀,土方 亘,大蔵 孝,安井 龍太,高原 弘樹,伏信 一慶,藤田 英明,篠田 卓也,近江 慶太","動的アクチュエータのモデリングによる発熱量損失算出の提案","自動車技術会2021年春季大会学術講演会","自動車技術会2023年春季大会学術講演会予稿集",,,,,2023,May
"中野 寛,矢部 龍一,高原 弘樹","動吸振器を用いた薄肉円筒工作物の旋削加工時に発生するびびり振動の抑制（動吸振器の周方向配置に対するびびり振動抑制効果の比較）","Dynamics and Design Conference 2022","Proceedings of Dynamics and Design Conference 2022",,,,,2022,Sept.
"中野 寛,山? 塁,高原 弘樹","ディスクブレーキの面外鳴きに対するパッド・ディスク間の半径方向接触領域の影響","第66 回理論応用力学講演会",,,,,,2022,June
"Yutaka Nakano,Tsubasa Kishi,Hiroki Takahara","Experimental Study on Application of Tuned Mass Dampers for Chatter in Turning of a Thin-Walled Cylinder",,"Applied Sciences","MDPI","Vol. 11","No. 24",,2021,Dec.
"高原 弘樹,小沼大河,中野 寛","二次元スロッシングにおける波高を用いた溢水量の推定法","Dynamics and Design Conference 2021","Proceeding of Dynamics and Design Conference 2021",,,,,2021,Sept.
"中野 寛,長 克憲,長谷 岳誠,高原 弘樹","トナー定着装置で発生する摩擦振動の発生メカニズムに関する研究","Dynamics and Design Conference 2021","Proceeding of Dynamics and Design Conference 2021",,,,,2021,Sept.
"Yutaka NAKANO,Takumi KOBAYASHI,Hiroki TAKAHARA","A Novel Design Concept of Tuned Mass Damper for Chatter  in End Milling Process","18th International Conference on Precision Engineering","Proceedings of ICPE2020",,,,,2020,Nov.
"高原 弘樹,新美 惣一朗,中野 寛","偏心二重円筒容器内液面の内部共振特性","Dynamics and Design Conference 2020",,,,,,2020,Sept.
"中野 寛,松村 有貴,長谷 岳誠,高原 弘樹","プリンタ定着器で発生する摩擦に起因した異音発生メカニズムに関する研究","Dynamics and Design Conference 2020","Proceeding of Dynamics and Design Conference 2020",,,,,2020,Aug.
"Yuki Matsumura,Yutaka Nakano,Yuki Matsumura,Takamasa Hase,Hiroki Takahara","Experimental Investigation on Generation Mechanism of Friction Vibration in Toner Fixing Device","The 18th Asia-Pacific Vibration Conference",,,,,,2019,Nov.
"Y. Nakano,T. Kishi,H. Takahara,L.Croppi,A.Scippa","Experimental Investigation on the Effect of Tuned Mass Damper on Mode Coupling Chatter in Turning Process of Thin-Walled Cylindrical Workpiece","the 18th Asia-Pacific Vibration Conference",,,,,,2019,Nov.
"中野 寛,金丸 将大,?原 弘樹,大井 一浩","回転切削器具の振動モニタリングによる口腔外科手術支援に関する研究","Dynamics and Design Conference 2019",,,,,,2019,Aug.
"高原弘樹,阿部滉平,中野寛","バルジングモードを用いた矩形容器内の溢水を伴うスロッシング解析","Dynamics and Design Conference 2019","Dynamics and Design Conference 2019",,,"No. 610",,2019,Aug.
"遠藤悠輔,肖鋒,高原弘樹","直方体容器内多液面の非線形挙動に関する数値シミュレーション","32回数値流体力学シンポジウム",,,,,,2018,Dec.
"中野 寛,吉川 剛司,高原 弘樹","磁気ばねと磁気ダンパで構成された動吸振器による低固有振動数を持つ構造物の制振","Dynamics and Design Conference 2018","Dynamics and Design Conference 2018 USB講演論文集",,,"No. 124",,2018,Aug.
"高原弘樹,青柳杜洋,中野寛","確率論的手法を用いた不規則なミスチューンを有する翼系の振動解析","Dynamics and Design Conference 2018","Dynamics and Design Conference 2018 USB講演論文集",,,"No. 430",,2018,Aug.
"高原弘樹,渋谷大輔,中野寛,飯島唯司,藤田 駿,牛尾 裕一","仮想壁を用いた矩形容器内の溢水を伴うスロッシング解析","Dynamics and Design Conference 2018","Dynamics and Design Conference 2018 USB講演論文集",,,"No. 401",,2018,Aug.
"Yutaka Nakano,Hiroki Takahara,Akihito Kobayashi","DESIGN OF TUNED MASS DAMPER FOR FORCED CHAT-TER AND REGENERATIVE CHATTER IN END MILLING PROCESS OF LOW-RIGIDITY WORKPIECE","the 25th  International Congress on Sound and Vibration","Proceedings of 25th International Congress on Sound and Vibration",,,"No. 473","pp. 1-8",2018,July
"Takamasa Hase,Yutaka Nakano,Hiroki Takahara,Yuki Matsumura","Experimental investigation on friction vibration in toner fixing device","4th International Conference on VIBRO-IMPACT SYSTEMS","Book of Abstracts of 4th International Conference on VIBRO-IMPACT SYSTEMS",,,,"page 41",2018,July
"Nakano Yutaka,De silva Amal Dilanka,Takahara Hiroki,Akiyama Yu","Countermeasure against Regenerative and Forced Chatter of Flexible Workpieces in Milling Process using Bi-directional Excitation",,"Transactions of Nanjing University of Aeronautics and Astronautics",,"Vol. 35","No. 1","pp. 10-19",2018,Feb.
"Yutaka Nakano,Amal Dilanka De Silva,Hiroki Takahara","COUNTERMEASURE AGAINST REGENERATIVE AND FORCED CHATTER OF FLEXIBLE WORKPIECES IN MILLING PROCESS USING A TWO DIRECTIONAL EXCITATION","The 17th Asian Pacific Vibration Conference","Proceedings of the 17th Asian Pacific Vibration Conference",,,,"pp. 1-12",2017,Nov.
"高原弘樹,青柳仁,中野寛","多液面を有する直方体容器内液面の非線形揺動特性（液面を分ける隔壁に平行な励振に対する三次元揺動の発生条件）","Dynamics and Design Conference 2017","Dynamics and Design Conference 2017 USB講演論文集","日本機械学会",,,,2017,Aug.
"Yutaka Nakano,Hiroki Takahara,Yu Akiyama","THE EFFECT OF TIME DELAY VARIATION INDUCED BY WORKPIECE EXCITATION ON REGENERATIVE CHATTER IN MILLING","24th International Congress on Sound and Vibration","Proceedings of 24th International Congress on Sound and Vibration",,,"# 1274","pp. 1-8",2017,July
"高原弘樹,中津川英治,中野寛","内部構造物を有する矩形容器内液面の非線形揺動特性","Dynamics and Design Conference 2016","Dynamics and Design Conference 2016 USB講演論文集","日本機械学会",,,,2016,Aug.
"中野寛,吉川剛司,高原弘樹","磁気ばねを用いた動吸振器による低振動数構造物の制振に関する研究","Dynamics and Design Conference 2016","Dynamics and Design Conference 2016 USB講演論文集","日本機械学会",,,,2016,Aug.
"渋谷大輔,高原弘樹,中野寛,飯島唯司,牛尾裕一","矩形容器内スロッシングで生じる溢水特性","関東学生会第55回学生員卒業研究発表講演会","日本機械学会関東支部第55回卒業研究発表講演会講演論文集","日本機械学会 関東支部",,,,2016,Mar.
"高原弘樹,新庄拓也,中野寛","負の質量特性を有する系の振動特性に対する減衰の影響","関東支部第22期総会・講演会","日本機械学会関東支部第22期総会講演会講演論文集","日本機械学会 関東支部",,,,2016,Mar.
"Yutaka NAKANO,Hiroki TAKAHARA,Noriyuki SHIRASUNA","Effect of Radial Contact Area of Brake Pad on In-plane Squeal of Automotive Disk Brake","16th Asia Pacific Vibration Conference","Proceedings of the 16th Asia Pacific Vibration Conference",,,,,2015,Nov.
"中野 寛,秋山 遊,高原 弘樹","強制加振による低剛性被削材に生じる再生びびり振動抑制メカニズム","Dynamics and Design Conference 2015","Dynamics and Design Conference 2015 USB講演論文集",,,,,2015,Aug.
"高原弘樹,青柳仁,中野寛","多液面を有する直方体容器内液面の三次元非線形揺動（液面を分ける隔壁に平行な励振に対する液面揺動）","Dynamics and Design Conference 2015","Dynamics and Design Conference 2015 USB講演論文集","日本機械学会",,,,2015,Aug.
"Nakano Yutaka,Takahara Hiroki,Akiyama Yu","Improvement of Workpiece Chatter Stability in EndMilling Process by Workpiece Excitation","The 22nd International Congress on Sound and Vibration","Proceedings of the 22nd International Congress on Sound and Vibration",,,,,2015,July
"高田一,有川敬輔,石綿良三,神谷恵輔,井上卓見,木村浩之,高原弘樹,木村康治,武田行生","演習 機械工学のための力学",,,"社団法人 日本機械学会",,,,2015,Mar.
"高田一,有川敬輔,石綿良三,神谷恵輔,井上卓見,木村弘之,高原弘樹,木村康治,武田行生","JSMEテキストシリーズ 演習 機械工学のための力学",,,"日本機械学会",,,,2015,Mar.
"高原 弘樹,中津川英治,中野寛","内部構造物を有する矩形容器内液面の揺動特性（内部共振の発生条件）",,"日本機械学会論文集",,"Vol. 81","No. 822","pp. 1-11",2015,Feb.
"高原 弘樹,中津川 英治,中野 寛","内部構造物を有する矩形容器内液面の非線形揺動特性","Dynamics and Design Conference 2014","Dynamics and Design Conference 2014 USB講演論文集",,,,,2014,Aug.
"中野 寛,河合 謙吾,高原 弘樹","被削材外部励振による低剛性被削材に生じる再生びびり振動抑制効果","Dynamics and Design Conference 2014","Dynamics and Design Conference 2014 USB講演論文集",,,,,2014,Aug.
"中野 寛,白砂 紀幸,後藤 優典,今井 悠介,高原 弘樹","パッド・ディスク間の半径方向接触領域変化によるブレーキ鳴き抑制効果","Dynamics and Design Conference 2014","Dynamics and Design Conference 2014 USB講演論文集",,,,,2014,Aug.
"Nakano Yutaka,Takahara Hiroki,Goto Yusuke,Shirasuna Noriyuki","THE EFFECT OF CONTACT AREA OF BRAKE PAD ON DISC BRAKE SQUEAL","FISITA 2014 World Automotive Congress","Proceedings of FISITA 2014 World Automotive Congress",,,,"pp. 1-9",2014,June
"中野 寛,高原 弘樹,河合 謙吾","多重動吸振器を用いたエンドミル加工時の強制びびりおよび再生びびり振動の抑制対策",,"日本機械学会論文集","一般社団法人日本機械学会","Vol. 80","No. 812","pp. 1-12",2014,Apr.
"高田一,有川敬輔,石綿良三,神谷恵輔,井上卓見,梶原逸朗,高原弘樹,吉田和哉,木村弘之,小池関也,木村康治,武田行生","機械工学のための力学",,,"社団法人 日本機械学会",,,,2014,Jan.
"高原 弘樹,松宮 宏明,中野 寛","不規則および確定励振をうけるミスチューンを有する翼・ディスク系の振動解析","Dynamics and Design Conference 2013","Dynamics and Design Conference 2013 CD-ROM講演論文集",,,,"pp. 1-10",2013,Aug.
"中野 寛,高原 弘樹,朝賀 龍太郎","エンドミル加工時のびびり振動抑制対策（回転系に取り付けた多重動吸振器の設計法）","Dynamics and Design Conference 2013","Dynamics and Design Conference 2013 CD-ROM講演論文集",,,,"pp. 1-10",2013,Aug.
"Yutaka Nakano,Hiroki Takahara","Design method of multiple dynamic absorbers for suppressing chatter in end-milling operation","the XI International Conference on Recent Advances in Structural Dynamics","Proceedings of the XI International Conference on Recent Advances in Structural Dynamics",,,"No. 999","pp. 1-15",2013,July
"Yutaka Nakano,Hiroki Takahara,Eiji Kondo","Countermeasure against chatter in end milling operations using multiple dynamic absorbers",,"Journal of Sound and Vibration","Elsevier","Vol. 332","No. 6","pp. 1626-1638",2013,Mar.
"Hiroki Takahara,Kensuke Hara,Takeshi Ishida","Nonlinear Liquid Oscillation in a Cylindrical Tank with an Eccentric Core Barrel",,"Journal of Fluids and Structures","Elsevier","Volume 35",,"pp. 120-132",2012,Nov.
"Yutaka Nakano,Hiroki Takahara,Kengo Yasue,Ryutaro Asaga","THE EFFECT OF MULTIPLE DYNAMIC ABSORBERS ON REGENERATIVE CHATTER AND RESONANCE IN END MILLING PROCESS","The ASME 2012 International Mechanical Engineering Congress & Exposition IMECE2012","Proceedings of the ASME 2012 International Mechanical Engineering Congress & Exposition",,,,,2012,Nov.
"高原 弘樹,荒川 直記,瀬崎 賢太郎,中野寛","振り子型直方体容器内液面の三次元揺動","Dynamics and Design Conference 2012","Dynamics and Design Conference 2012 USB講演論文集",,,"No. 854","pp. 1-10",2012,Sept.
"中野寛,安江 謙吾,高原 弘樹","エンドミル加工時の強制びびりおよび再生びびり振動に対する多重動吸振器の抑制効果","Dynamics and Design Conference 2012","Dynamics and Design Conference 2012 CD-ROM講演論文集",,,"No. 214","pp. 1-10",2012,Sept.
"中野寛,朝賀 龍太郎,高原 弘樹","赤池情報量規準を用いたびびり振動発生限界の判定法","Dynamics and Design Conference 2012","Dynamics and Design Conference 2012 CD-ROM講演論文集",,,"No. 213","pp. 1-8",2012,Sept.
"Yutaka Nakano,Hiroki Takahara,Ryohei Tanaka,Ryo Iyoda","ACTIVE DISK BRAKE SQUEAL SUPPRESSION USING PIEZOELECTRIC ACTUATOR","The 19th International Congress on Sound and Vibration","Proceedings of the 19th International Congress on Sound and Vibration",,,"No. 202","pp. 1-7",2012,July
"Hiroki Takahara,Koji Kimura","Frequency Response of Sloshing in an Annular Cylindrical Tank Subjected to Pitching Excitation",,"Journal of Sound and Vibration","Elsevier","Volume 331","no. 13","page 3199?3212",2012,June
"HIROKI TAKAHARA,Takayuki SUGIYAMA,Yutaka NAKANO","Characteristics of Random Vibration of Mistuned Bladed Disk",,"Journal of System Design and Dynamics","The Japan Society of Mechanical Engineers","Vol. 6","No. 1","pp. 120-130",2012,Feb.
"高原 弘樹,牧本  明大","ミスチューンを有する翼・ディスク系の感度解析を用いた振動特性評価",,"日本機械学会論文集 C編",,"Vol. 78","No. 1","pp. 12-26",2012,Jan.
"Yutaka NAKANO,Hiroki TAKAHARA,Hirotaka MATSUMOTO","Investigation into Vibration Absorbers Attached to Tool Holder against Chatter in End Milling Operations","The 14th Asia Pacific Vibration Conference","Proceedings of the 14th Asia Pacific Vibration Conference",,"Vol. 3",,"pp. 1503-1512",2011,Dec.
"中野寛,松本裕貴,高原弘樹","エンドミル加工時の再生びびり振動に対する多重動吸振器の制振特性","Dynamics and Design Conference 2011","Dynamics and Design Conference 2011 CD-ROM講演論文集",,,"No. 406",,2011,Sept.
"高原弘樹,杉山敬幸,中野寛","ミスチューンを有する翼・ディスク系の不規則振動特性",,"日本機械学会論文集 C編","日本機械学会","Vol. 77","No. 781","pp. 3365-3374",2011,Sept.
"高原弘樹,杉山敬幸,中野寛","ミスチューンを有する翼・ディスク系の不規則振動特性","Dynamics and Design Conference 2011","Dynamics and Design Conference 2011 CD-ROM講演論文集",,,"No. 534",,2011,Sept.
"中野 寛,高原 弘樹,田中 遼平","ディザーコントロールによるディスクブレーキの鳴き抑制","Dynamics and Design Conference 2011","Dynamics and Design Conference 2011 CD-ROM講演論文集",,,"No. 405","pp. 1-7",2011,Sept.
"Hiroki TAKAHARA,Shinji TAMURA,Jun FUKUDA,Yoichi HIKITA,Koji KIMURA","Free Vibration Analysis of Multi-Surface Liquid Motion in a Rectangular Tank with Different Surface Areas",,"Journal of Environment and Engineering","The Japan Society of Mechanical Engineers","vol. 6","No. 2","pp. 340-351",2011,Mar.
"高原 弘樹","負の質量特性を有する1自由度系の自由振動特性","日本機械学会関東支部第17期総会講演会講演論文集",,"日本機械学会","  110","  1","  201-202",2011,Mar.
"Yutaka Nakano,Hiroki Takahara","COUNTERMEASURE AGAINST REGENERATIVE CHATTER IN END MILLING OPERATIONS WITH VIBRATION ABSORBERS","ASME 2010 International Mechanical Engineering Congress & Exposition","Proceedings of the ASME 2010 International Mechanical Engineering Congress & Exposition",,,,,2010,Dec.
"中野 寛,高原 弘樹,園田拓郎,畑尾 友紀","回転工具に取り付けた動吸振器によるエンドミル加工時再生びびり振動抑制対策","Dynamics and Design Conference 2010","Dynamics and Design Conference 2010 CD-ROM講演論文集","日本本機械学会",,"No. 353","pp. 1-6",2010,Sept.
"Yutaka Nakano,Hiroki Takahara","Experimental and Analytical Chatter Prediction Method in End-Milling Process","2nd INTERNATIONAL CONFERENCE ON VIBRO-IMPACT SYSTEMS","CD-ROM Proceedings of 2nd INTERNATIONAL CONFERENCE ON VIBRO-IMPACT SYSTEMS",,,"No. 37",,2010,Jan.
"Yutaka NAKANO,Eiji KONDO,Hiroki TAKAHARA","Stability Analysis and Countermeasure against Regenerative Chatter in End Milling Process","13th Asia Pacific Vibration Conference","CD-ROM Proceedings of the 13th Asia-Pacific Vibration Conference(APVC2009)",,,,"pp. 1-10",2009,Nov.
"高原弘樹","スロッシング?容器内液面の振動?",,"日本機械学会誌","日本機械学会","Vol. 112","No. 1090","pp. 740-741",2009,Sept.
"中野 寛,近藤 英二,高原 弘樹","動吸振器を用いたエンドミル加工時に発生する再生びびり振動の抑制対策","Dynamics and Design Conference 2009","D&D2009. 日本機械学会機械力学・計測制御講演論文CD-ROM講演論文集","日本機械学会機械力学・計測制御部門",,"No. 328",,2009,Aug.
"木村康治,高原弘樹,田村晋司,廣瀬雄一","多液面を有する直方体容器内液面の三次元自由振動特性",,"日本機械学会論文集（Ｃ編）",,"Vol. 75","No. 754","pp. 1568-1574",2009,June
"高原 弘樹,田村 晋司,福田 潤,疋田 洋一,木村 康治","面積の異なる多液面を有する直方体容器内液体の2次元自由振動特性",,"日本機械学会論文集(C編)","日本機械学会","Vol. 75","No. 749","pp. 81-86",2009,Jan.
"Kensuke Hara,HIROKI TAKAHARA","Hamiltonian Formulation of Free Surface and Interface Motions in a Tank(N-Wave Resonant Interaction Caused by Nonlinearity of System)",,"Journal of System Design and Dynamics","The Japan Society of Mechanical Engineers","Vol. 2","No. 6","pp. 1218-1229",2008,Dec.
"Kensuke Hara,HIROKI TAKAHARA","Hamiltonian Formulation for Nonlinear Sloshing in Layered Two Immiscible Fluids",,"Journal of System Design and Dynamics","The Japan Society of Mechanical Engineers","Vol. 2","No. 5","pp. 1183-1193",2008,Nov.
"木村 康治,田村 晋司,高原 弘樹,松前 智之","白色励振を受ける劣化ヒステリシス系の非ガウス応答解析",,"日本機械学会論文集(C編)",,"Vol. 74","No. 746","pp. 2479-2488",2008,Oct.
"原謙介,高原弘樹","Hamiltonianを用いた容器内二層流体の液面揺動(第3報，系の非線形性に起因するN波共振現象)",,"日本機械学会論文集 C編","日本機械学会","Vol. 74","No. 741","pp. 1177-1184",2008,May
"Kensuke Hara,HIROKI TAKAHARA","Hamiltonian Formulation of Surface and Interface Sloshing in a Tank Containing Two Immiscible Fluids",,"Journal of System Design and Dynamics","日本機械学会","Vol. 2","No. 1","pp. 299-310",2008,Apr.
"原謙介,車拓哉,高原弘樹","Dirichlet-Neumann Operatorを用いた容器内液面の非線形応答解析",,"日本機械学会論文集 C編","日本機械学会","Vol. 74","No. 739","pp. 578-586",2008,Mar.
"木村康治,高原弘樹","目を輝かす子どもたち?おもしろメカニカルワールド?",,"日本機械学会誌",,"Vol. 110","No. 1069","pp. 936-937",2007,Dec.
"原謙介,高原弘樹","Hamiltonianを用いた容器内二層流体の液面揺動(第2報，非線形時刻歴応答解析)",,"日本機械学会論文集 C編","日本機械学会","Vol. 73","No. 735","pp. 2891-2899",2007,Nov.
"原謙介,高原弘樹","Hamiltonianを用いた容器内2層流体の非線形スロッシング解析","D&D2007","日本機械学会機械力学・計測制御講演論文CD-ROM講演論文集","日本機械学会機械力学・計測制御部門",,"No. 810",,2007,Sept.
"原謙介,高原弘樹","Hamiltonianを用いた容器内二層流体の液面揺動(第1報，正準運動方程式の導出と線形解析)",,"日本機械学会論文集 C編","日本機械学会","Vol. 73","No. 732","pp. 2217-2224",2007,Aug.
"Kensuke Hara,HIROKI TAKAHARA","Hamiltonian Formulation of Surface and Interface Sloshing in a Tank Containing Two Fluids","12th Asia-Pacific Vibration Conference","Proceedings of 12th Asia-Pacific Vibration Conference (CR-Rom)","The Japan Society of Mechanical Engineers, Dynamics, Measurement and Control Division",,"No. 54",,2007,Aug.
"車拓哉,高原 弘樹","ノーマルモードを用いた非線形スロッシング解析(非線形共振特性)","Dynamics & Design Conferecee 2006","日本機械学会機械力学・計測制御講演論文アブストラクト集，CD-ROM講演論文集",,"Vol. 06","No. 7","pp. 9",2006,Aug.
"原謙介,高原 弘樹","Dirichlet-Neumann Operatorを用いた直方体容器内液面の非線形振動","Dynamics & Design Conferecee 2006","日本機械学会機械力学・計測制御講演論文アブストラクト集，CD-ROM講演論文集",,"Vol. 06","No. 7","pp. 135",2006,Aug.
"高原 弘樹","おもしろメカワールド(編集，分担)",,,"オーム社",,,,2006,June
"車　拓哉,高原　弘樹","Hamiltonianを用いた容器内自由表面の非線形自由振動解析","第55回理論応用力学講演会","第55回理論応用力学講演会講演論文集",,,,"pp. 411-412",2006,Jan.
"高原 弘樹,釣賀 宏之,木村 康治","ピッチング励振を受ける直方体容器内の3次元スロッシング(容器縦横比の影響)","日本機械学会関東支部第11期総会講演会","日本機械学会関東支部第11期総会講演会講演論文集",,"Vol. 060","No. 1","pp. 95-96",2005,Mar.
"原謙介,高原 弘樹","偏心二重円筒容器内液面の周波数応答解析","Dynamics & Design Conferecee 2005","日本機械学会機械力学・計測制御講演論文アブストラクト集，CD-ROM講演論文集",,"Vol. 5","No. 15","pp. 4",2005,
"高原　弘樹,都知木　邦裕","振り子型直方体容器内液面の非線形振動特性","Dynamics & Design Conferecee 2005","日本機械学会機械力学・計測制御講演論文アブストラクト集，CD-ROM講演論文集",,"Vol. 5","No. 15","pp. 57",2005,
"高原 弘樹,原謙介","偏心二重円筒容器内液面の非線形振動","Dynamics & Design Conferecee 2004","日本機械学会機械力学・計測制御講演論文アブストラクト集，CD-ROM講演論文集",,"Vol. 4","No. 9","pp. 356",2004,
"高原弘樹","機械工学便覧 基礎編 α2 機械力学(分担)",,"日本機械学会","日本機械学会",,,,2004,
"高原　弘樹,牧本　明大","インテンショナルミスチューンを有する翼・ディスク系の振動特性","Dynamics & Design Conferecee 2004","日本機械学会機械力学・計測制御講演論文アブストラクト集，CD-ROM講演論文集",,"Vol. 4","No. 9","pp. 324",2004,
"Shinji Tamura,Koji Kimura,Hiroki Takahara,Tomoyuki Matsumae","Random Vibration Analysis for a Degrading Hysteretic System Considering Disspated Energy Distribution","10th Asia-Pacific Vibration Conference","Proceedings of the 10th Asia-Pacific Vibration Conference",,"Vol. 2",,"pp. 687-691",2003,Nov.
"木村 康治,高原 弘樹,田村 晋司,廣瀬 雄一","多液面を有する直方体容器内液面の三次元自由振動特性",,"日本機械学会機械力学・計測制御講演論文アブストラクト集，CD-ROM講演論文集",,,"No. 03-7","p. 324",2003,Sept.
"木村康治,高原 弘樹,田村 晋司,松前 智之","散逸エネルギーの分布を考慮した劣化ヒステリシス系の不規則振動解析","第52回理論応用力学講演会","第52回理論応用力学講演会講演論文集",,,,"pp. 359-360",2003,Jan.
"Hiroki Takahara,Koji Kimura","Frequency Response of Sloshing in an Annular Cylindrical Tank Subjected to Pitching Excitation",,"Proceedings of Asia-Pacific Vibration Conference '03",,"Vol. 2",,"pp. 674-679",2003,
"高原　弘樹,長谷川　敦司","格子ボルツマン法を用いた非線形系の不規則応答分布の推定",,"本機械学会機械力学・計測制御講演論文アブストラクト集，CD-ROM講演論文集",,"Vol. 3","No. 7","pp. 158",2003,
"高原 弘樹,渡辺 厳,木村 康治","水平励振を受ける振り子型直方体容器内液面の非線形振動",,"日本機械学会機械力学・計測制御講演論文アブストラクト集，CD-ROM講演論文集",,"Vol. 2","No. 9","pp. 117",2002,
"高原 弘樹,木村康治","ピッチング励振を受ける直方体容器内液面の周波数応答",,"日本機械学会論文集C編",,"Vol. 68","No. 667","pp. 738-746",2002,
"高原 弘樹,牧本 明大,木村康治","ミスチューンを有する翼・ディスク系の感度解析を用いた振動特性評価",,"日本機械学会機械力学・計測制御講演論文アブストラクト集，CD-ROM講演論文集",,"Vol. 2","No. 9","pp. 8",2002,
"高原弘樹,疋田洋一,木村康治","多液面を有する容器内液面の非線形振動に関する研究",,"日本機械学会関東支部第7期総会講演会講演論文集",,"Vol. 010","No. 1","pp. 307-308",2001,
"木村康治,高原弘樹","ピッチング励振を受ける二重円筒容器内液面の非線形振動",,"日本機械学会論文集C編",,"Vol. 67","No. 663","pp. 3390-3397",2001,
"高原弘樹,石田岳志,木村康治","偏心二重円筒容器内液面の非線形振動特性",,"日本機械学会機械力学・計測制御講演論文アブストラクト集，CD-ROM講演論文集",,"Vol. 01","No. 5","pp. 177",2001,
"木村康治,高原弘樹,田村晋司","ガウス性重みつき和を用いた履歴非線形系の不規則応答分布の推定",,"日本機械学会機械力学・計測制御講演論文アブストラクト集，CD-ROM講演論文集",,"Vol. 01","No. 5","pp. 241",2001,
"木村康治,高原 弘樹,山本 周","非白色性励振を受ける減衰非線形系の非ガウス応答分布の推定",,"日本機械学会機械力学・計測制御講演論文アブストラクト集，CD-ROM講演論文集",,"Vol. 00","No. 6","pp. 59",2000,
"木村康治,高原 弘樹,疋田 洋一","多液面を有する直方体容器内液面の２次元自由振動解析",,"日本機械学会機械力学・計測制御講演論文アブストラクト集，CD-ROM講演論文集",,"Vol. 00","No. 6","pp. 151",2000,
"奥泉信克,木村康治,高原弘樹","調和励振を受けるヒステリシス系の振動特性(非対称解の発生領域)",,"日本機械学会論文集C編",,"Vol. 64","No. 617","pp. 29-35",1998,
"木村康治,高原弘樹,奥泉信克","調和励振を受けるヒステリシス系の振動特性(二次の平均法による解析)",,"日本機械学会論文集C編",,"Vol. 63","No. 610","pp. 1821-1828",1997,
"木村康治,高原弘樹","ピッチング励振を受ける直方体容器内液面のパラメトリック振動(第1報,逆対称モード)",,"日本機械学会論文集(C)",,"Vol. 63","No. 608","pp. 1052-1060",1997,
"高原 弘樹,木村康治","ピッチング励振を受ける直方体容器内液面のパラメトリック振動(第2報,対称モード)",,"日本機械学会論文集C編",,"Vol. 63","No. 610","pp. 1861",1997,
"木村康治,高原弘樹,小倉秀夫","ピッチング励振を受ける直方体容器内の三次元スロッシング解析",,"日本機械学会論文集(C)",,"Vol. 62","No. 596","pp. 1285-1294",1996,
"高原弘樹","ピッチング励振を受ける円筒容器内液面の非線形振動に関する研究",,,,,,,1995,July
"木村康治,高原弘樹,萩谷忍,坂田勝","不規則インパルス列を受ける非線形系の応答分布",,"日本機械学会論文集(C)",,"Vol. 61","No. 583","pp. 836-841",1995,
"青木繁,岸本喜久雄,高原弘樹,天谷賢治,森谷之信,井上裕嗣","材料力学における逆問題",,,"裳華房",,,,1994,Nov.
"高原弘樹,木村康治,坂田勝","ピッチング励振を受ける円筒容器内液面のパラメトリック振動",,"日本機械学会論文集C編",,"Vol. 60","No. 579","pp. 3727-2732",1994,
"高原弘樹,木村康治,坂田勝","半径方向の高次モードを考慮したピッチング励振を受ける円筒容器内液面の非線形振動解析",,"日本機械学会論文集C編",,"Vol. 60","No. 574","pp. 1924-1932",1994,
"高原弘樹,木村康治,筒井賢,坂田勝","ピッチング励振を受ける円筒容器内液面の周波数応答解析",,"日本機械学会論文集(C)",,"Vol. 60","No. 572","pp. 1210-1216",1994,
"高原弘樹,木村康治,筒井賢,坂田勝","ピッチング励振を受ける円筒容器内液面の周波数応答解析",,"日本機械学会論文集C編",,"Vol. 60","No. 572","pp. 1210-1216",1994,
"木村康治,高原弘樹,坂田勝","半径方向の高次モードを考慮した垂直励振を受ける円筒容器内液面の非線形振動解析",,"日本機械学会論文集C編",,"Vol. 60","No. 578","pp. 3259-3267",1994,
"木村康治,高原弘樹,大森直陸,坂田勝","定常回転する円筒容器内の液面揺動の固有振動数(楕円型振動モード)",,"日本機械学会論文集C編",,"Vol. 60","No. 570","pp. 374-379",1994,
"木村康治,高原弘樹,坂田勝","ピッチング励振を受ける容器内液面の振動解析(液面揺動の発生しない条件)",,"日本機械学会論文集C編",,"Vol. 59","No. 565","pp. 2606-2612",1993,
"高原弘樹,木村康治,伊東健,坂田勝","ピッチング励援を受ける弾性円筒容器内の非線形液面揺動",,"日本機械学会論文集(C)",,"Vol. 59","No. 561","pp. 1378-1385",1993,
"木村康治,高原弘樹,伊東健,坂田勝","ピッチング励振を受ける剛体円筒容器内液面の非線形振動",,"日本機械学会論文集(C)",,"Vol. 58","No. 556","pp. 3564-3571",1992,
"郭士傑,高原弘樹,木村康治,坂田勝","進行波形超音波モータの回転特性",,"日本機械学会論文集(C)",,"Vol. 58","No. 554","pp. 2945-2951",1992,
"郭士傑,高原弘樹,木村康治,坂田勝","超音波モータ用ステータの3次元振動解析",,"日本機械学会論文集C編",,"Vol. 57","No. 541","pp. 2804-2810",1991,
"高原弘樹,黒岩正,本江明","機構設計用シミュレーション・システム(第4報,機構の振動解析)",,"日本機械学会論文集C編",,"Vol. 54",,"pp. 506",1988,
"黒岩正,高原弘樹,本江明","機構設計用シミュレーション・システム(第3報,機構の制御系・時間応答解析)",,"日本機械学会論文集C編",,"Vol. 54",,"pp. 506",1988,
"黒岩正,本江明,平岡克己,高原弘樹","機械設計用シミュレーション・システム(第2報,機構の運動解析)",,"日本機械学会論文集C編",,"Vol. 53",,"pp. 486",1987,
"Masaru SAKATA,Koji KIMURA,Hiroki TAKAHARA,Hisaichi OHNABE","Transient Vibration of Bladed Flexible Rotor due to Sudden Imbalance",,"International Conference on Rotordynamics",,,,"pp. 541-546",1986,
"高原弘樹","翼破損に伴う高速回転体の過度振動に関する研究",,,,,,,1985,