"戸谷公紀,佐山聡,齊藤卓志","背景型シュリーレン法による軸対称な射出成形品の屈折率分布測定",,"成形加工",,"Vol. 36","No. 2","pp. 87-93",2024,Jan.
"Takushi Saito,Yinfeng Xia,Tatsuya Kawaguchi","Measurement of interfcial thermal resistance of layered heterogeneous polymers obtained by rotating parallel discs","Polymer Processing Society 2023, Asia-Australasia Regional Conference","Conference Abstracts",,,,"  Keynote Lecture 15",2023,Nov.
"戸谷公紀,赤石直也,鷹見凌,紺野将光,中村博昭,山本晋聡,田代裕樹,東信也,齊藤卓志","背景型シュリーレン法による射出成形部品のインライン屈折率分布測定","プラスチック成形加工学会第31回秋季大会","成形加工シンポジア'23予稿集",,,,"  F-211",2023,Nov.
"Yinfeng Xia,Tatsuya Kawaguchi,Takushi Saito","Stirring Method of Multi-Layer Polymer for Interfacial Heat Resistance Measurement","The 33rd International Symposium on Transport Phenomena(ISTP-33)","Proceedings of the 33rd International Symposium on Transport Phenomena",,,"No. 69",,2023,Sept.
"川口達也,宮竜太朗,齊藤卓志","LightField 画像を用いた高速な深度推定機械学習モデルの構築","第51回可視化情報シンポジウム","第51回可視化情報シンポジウム講演論文集",,,,,2023,Aug.
"鈴木孝典,東孝佑,川口達也,齊藤卓志","高粘度流体の分配挙動に与えるレオロジー特性の影響","第34回プラスチック成形加工学会年次大会","第34回プラスチック成形加工学会予稿集",,,,"  G-201",2023,June
"Ryutaro Miya,Takushi Saito,Tatsuya Kawaguchi","Real-time depth estimation machine learning model for Light Field raw images","17th Asian Symposium on Visualization","Proceedings of the 17th Asian Symposium on Visualization",,,,,2023,June
"Evan Philander Suryawijaya,Tatsuya Kawaguchi,Takushi Saito","Theoretical Dropwise Condensation Heat Transfer Analysis of Polymer Infused Porous Sintered Copper Nanoparticle","11th International Conference on Boiling & Condensation Heat Transfer","Abstracts of ICBCHT11",,,,"p. 19",2023,May
"宮竜太朗,川口達也,齊藤卓志","ライトフィールド画像を用いたリアルタイム深度推定機械学習モデルの構築","第60回日本伝熱シンポジウム","第60回日本伝熱シンポジウム講演論文集",,,,"  Paper-G314",2023,May
"川島拓真,川口達也,齊藤卓志","逆非平衡分子動力学法による異種高分子材料界面近傍の熱抵抗分布解析","第60回日本伝熱シンポジウム","第60回日本伝熱シンポジウム講演論文集",,,,"  Paper-D123.pdf",2023,May
"川島拓真,川口達也,齊藤卓志","RNEMDを用いた異種高分子材料界面における伝熱特性の考察","成形加工シンポジア'22","成形加工シンポジア'22講演予稿集",,,,"pp. 215-216",2022,Nov.
"Takushi Saito,Takuma Kawashima,Tatsuya Kawaguchi","Analysis of heat transfer at polymer interface by molecular dynamics simulation","Asian Workshop on Polymer Processing 2022","Abstract book of AWPP2022",,,,"p. 38",2022,Oct.
"Tatsuya Kawaguchi,Yuki Tano,Takushi Saito","Experimental Studies on the Taylor-Couette Flow of Shear-Thinning Fluids",,"International Journal of GEOMATE",,,,,2022,Sept.
"Kosuke Higashi,Kazuhisa Fukutani,Tatsuya Kawaguchi,Isao Satoh,Takushi Saito","Effect of shear-thinning behavior on fluid temperature distribution mixed by single rotor",,"Journal of Thermal Science and Technology",,"Vol. 17","No. 3","p. 22-00122",2022,June
"松下裕也,東孝祐,川口達也,齊藤卓志","流体のレオロジー特性が混合進展に与える影響の可視化解析","第33回プラスチック成形加工学会年次大会","第33回プラスチック成形加工学会年次大会予稿集（オンライン）",,,,"  B-108",2022,June
"佐山聡,戸谷公紀,齊藤卓志","背景型シュリーレン法による射出成形部品の屈折率分布計測","第33回プラスチック成形加工学会年次大会","第33回プラスチック成形加工学会年次大会講演論文集（オンライン）",,,,"  G-106",2022,June
"松本康佑,川口達也,齊藤卓志","伝熱面上に形成された銅ナノ粒子層の構造制御による沸騰熱伝達性能の変化","第59回日本伝熱シンポジウム","第59回日本伝熱シンポジウム講演論文集（電子版）",,,,"  B223",2022,May
"Takuma Kawashima,Takushi Saito,Tatsuya Kawaguchi","Basic study of thermal conductivity estimation of polymer material by RNEMD","37th International Conference of the Polymer Processing Society","Abstracts of PPS-37",,,,"  G10-417",2022,Apr.
"Hao Cong,Seung Joon Lee,Kosuke Higashi,Tatsuya Kawaguchi,Takushi Saito","Measurement of temperature distribution in mixing viscous fluid using thermochromic liquid crystals","37th International Conference of the Polymer Processing Society","Abstracts of PPS-37",,,,"  G11-394",2022,Apr.
"Kosuke Higashi,Kazushisa Fukutani,Tatsuya Kawaguchi,Isao Satoh,Takushi Saito","Effect of shear-thinning behavior on interface renewal in partially filled single rotor mixing",,"Journal of Thermal Science and Technology",,"Vol. 17","No. 1","p. 22-00020",2022,Apr.
"Yuki TANO,Tatsuya KAWAGUCHI,Takushi SAITO","Experimental Studies on the Taylor-Couette Flow of Shear-thinning Fluids","GEOMATE 2021","Proceedings of GEOMATE 2021",,,,,2021,Nov.
"Yusuke Uetsuki,Tatsuya Kawaguchi,Takushi Saito","Evaporation mass flux measurement from solvent surface by Mach-Zehnder interferometer","The 2nd Asian Conference on Thermal Sciences",,,,,"  Paper-1152.pdf",2021,Oct.
"Kiminori Toya,Satoshi Sayama,Takushi Saito","Refractive index distribution measurement of injection molded polymer components by background-oriented schlieren method","The 2nd Asian Conference on Thermal Sciences","Extended abstract of ACTS2021",,,,"  Paper-1123.pdf",2021,Oct.
"村本暢広,川口達也,齊藤卓志","銅ナノ粒子多孔質層内における液水浸透挙動と内部構造の関係",,"伝熱",,"Vol. 29","No. 4","pp. 55-61",2021,Oct.
"Gea Fardias Mu'min,Tatsuya Kawaguchi,Takushi Saito","Droplet deformation and breakup of an immiscible model fluid system by radiation heat using infrared laser","The 2nd Asian Conference on Thermal Sciences","Extended abstracts of ACTS2021",,,,"  Paper-1167.pdf",2021,Oct.
"田野 裕樹,川口 達也,齊藤 卓志","回転二重円筒内における非ニュートン流体の流動場の可視化","第４９回可視化情報シンポジウム",,,,,,2021,Sept.
"Hesham Khalil,Takushi Saito,Hamdy Hassan","Comparative study of heat pipes and liquid-cooling systems with thermoelectric generators for heat recovery from chimneys",,"International Journal of Energy Research",,,,,2021,Sept.
"戸谷 公紀,佐山 聡,齊藤 卓志","背景型シュリーレン法による射出成形部品の屈折率分布計測","日本機械学会2021年度年次大会","2021年度年次大会予稿集",,,,"  S131-03",2021,Sept.
"Gea Fardias Mu'min,Tatsuya Kawaguchi,Takushi Saito","Droplet breakup of a high-viscosity-ratio system in a nonuniform temperature field under laser irradiation",,"Phys. Fluids",,"Vol. 33","  073108",,2021,July
"SeungJoon LEE,東孝祐,川口達也,齊藤卓志","感温液晶カプセルを用いた非充満混合における熱拡散状況の解析","プラスチック成形加工学会第32回年次大会","成形加工'21",,,,"pp. 201-202",2021,June
"森崎裕樹,田中稔,竹内聡,新間敦,田中宏一,岡部沙也佳,篠田卓也,川口達也,齊藤卓志","結晶融解潜熱測定による射出成形PPS平板の板厚さ方向における冷却速度推定","プラスチック成形加工学会第32回年次大会","成形加工'21",,,,"pp. 175-176",2021,June
"高橋麗男,川口達也,齊藤卓志","高速度カメラを用いた超音波加振される非晶性高分子材料の可塑化挙動解析","プラスチック成形加工学会第32回年次大会","成形加工'21",,,,"pp. 135-136",2021,June
"田口丈哲,樋口陸斗,川口達也,齊藤卓志","異種高分子材料の界面における熱抵抗に関する研究","プラスチック成形加工学会第32回年次大会","成形加工'21",,,,"pp. 133-134",2021,June
"村本暢広,川口達也,齊藤卓志","銅ナノ粒子多孔質層内における液水浸透挙動と内部構造の関係","第58回日本伝熱シンポジウム","第58回日本伝熱シンポジウム講演論文集",,,,"  Paper-D321.pdf",2021,May
"Gea Fardias Mu'min,Tatsuya Kawaguchi,Takushi Saito","Study on droplet deformation of an immiscible fluid system by selective radiation heat using infrared laser",,"Polymer Engineering and Science",,"Vol. 61","Issue 4","pp. 1232-1242",2021,Feb.
"Ahmed Abdo,Takushi Saito,Shinichi Ookawara,Ali Radwan,Mahmoud Ahmed","Experimental study of the performance of concentrator photovoltaic/thermoelectric generator system integrated with a new 3D printed microchannel heat sink",,"International Journal of Energy Research",,"Vol. 45","Issue 5","pp. 7741-7763",2021,Jan.
"齊藤卓志,船橋大輝,川口達也,佐藤勲","超音波加振による樹脂可塑化に対する実験的考察","プラスチック成形加工学会第28回秋季大会","成形加工シンポジア'20",,,,"pp. 87-88",2020,Dec.
"川口達也,齊藤 卓志,佐藤 勲","粒子画像流速測定法による低アスペクト比Taylor-Couette流れの流動解析","日本機械学会 第98期 流体工学部門 講演会",,,,,,2020,Nov.
"松本康佑,東孝祐,福谷和久,川口達也,佐藤勲,齊藤卓志","流体粘度のShear-thinning性がシングルローターによる混合進展に与える影響","プラスチック成形加工学会第31回年次大会","成形加工'20",,,,"pp. 75-76",2020,June
"丸山椋大,齊藤卓志,川口達也,佐藤勲","分子動力学シミュレーションによる異種高分子材料の界面熱抵抗の推定","プラスチック成形加工学会第31回年次大会","成形加工'20",,,,"pp. 291-292",2020,June
"Takushi Saito,Kento Yamada,Tatsuya Kawaguchi,Isao Satoh","Effect of Compatibilizer on Thermal Resistance at Bonded Interface of Heterogeneous Polymers","The 2nd Pacific Rim Thermal Engineering Conference","Extended Abstracts of the 2nd Pacific Rim Thermal Engineering Conference",,,,,2019,Dec.
"Tatsuya Kawaguchi,Yoona Jeong,Takushi Saito,Isao Satoh","FLOW INVESTIGATIONS WITHIN A CONCENTRIC CYLINDERS OF GAS SENSOR MODULE FOR I.C. ENGINES",,"International Journal of GEOMATE,",,"Vol. 17","No. 62","pp. 77 - 83",2019,Nov.
"Yang-ming Fan,Takushi Saito,Tatsuya Kawaguchi,Isao Satoh","Study of Surface Wetting Control of the Solid Body by Chemical States and Surface Geometry of Coated Nano-particles Layer","The 12th Pacific Symposium on Flow Visualization and Image Processing","PSFVIP-12 Full Paper",,,,,2019,Nov.
"Gea Ferdias Mumin,Tatsuya Kawaguchi,Takushi Saito","Thermal Approach for Viscosity Matching in Simple Droplet for Achieving Dispersion Control by Non-homogeneous Temperature Field","The 12th Pacific Symposium on Flow Visualization and Image Processing","PSFVIP-12 Full Papers",,,,,2019,Nov.
"Jeong Yoona,川口達也,齊藤卓志,佐藤勲","多重円筒構造を有する酸素センサ内部流れの流動解析","熱工学コンファレンス2019","熱工学コンファレンス2019講演論文集",,,,,2019,Oct.
"山田健登,齊藤卓志,川口達也,佐藤勲","高分子材料の接合界面熱抵抗に与える相溶化剤の影響","成形加工'19","成形加工'19予稿集",,,,"pp. 111-112",2019,June
"樋口陸斗,東孝祐,福谷和久,川口達也,佐藤勲,齊藤卓志","非充満状態で撹拌される粘弾性流体の混練挙動解析","成形加工'19","成形加工'19予稿集",,,,"pp. 157-158",2019,June
"Takushi Saito,Yuki Noguchi,Kosuke Higashi,Kazuhisa Fukutani,Tatsuya Kawaguchi,Isao Satoh","Flow Analysis of Viscoelastic Fluid Stirred by Single Rotor","35th International Conference of the Polymer Processing Society","Conference Proceedings of PPS35",,,,,2019,May
"川口達也,野口侑希,齊藤卓志,佐藤勲","低アスペクト比におけるTaylor-Couette流れの流動構造解析","第56回日本伝熱シンポジウム","第56回日本伝熱シンポジウム予稿集",,,,,2019,May
"齊藤卓志","射出成形金型の機構と製作法／金型の企画・設計／冷却の計算",,"成形加工","プラスチック成形加工学会","Vol. 31","No. 3","pp. 111-114",2019,Feb.
"齊藤卓志,伊原哲志,川口達也,佐藤勲","流動を利用した配向制御による炭素繊維添加高分子複合材料の熱伝導率向上",,"成形加工",,"Vol. 31","No. 3","pp. 126-128",2019,Feb.
"齊藤卓志","材料の溶融を考えるための伝熱基礎",,"樹脂の溶融混練・押出機と複合材料の最新動向","シーエムシー出版",,,"pp. 27-35",2018,Dec.
"齊藤卓志","温調機構の工夫による射出成形金型の省エネルギー化＜金型温調にヒートパイプと薄膜発熱体の適用を試みる＞",,"プラスチックス",,"Vol. 69","No. 12","pp. 1-5",2018,Dec.
"齊藤卓志","ポリマー混練時の樹脂の伝熱メカニズム",,"押出成形の条件設定とトラブル対策","(株)技術情報協会",,,"pp. 35-41",2018,Dec.
"齊藤卓志,伊原哲志,川口達也,佐藤勲","炭素繊維の強制配向による複合材料の熱伝導率向上","成形加工シンポジア'18（浜松）","成形加工シンポジア'18予稿集",,,,"pp. 61-62",2018,Nov.
"Tatsuya Kawaguchi,Yoona Jeong,Takushi Saito,Isao Satoh","Flow Investigations within a concentric cylinders of gas sensor modulefor I.C. engines","4th Int. Conf.  on Science, Engineering & Environment (SEE)","Proc. 4th Int. Conf.  on Science, Engineering & Environment (SEE)",,,,,2018,Nov.
"齊藤卓志,長谷川英紀,白石豊,造田敬一","薄膜発熱体を用いた射出成形用急速加熱金型の研究","型技術ワークショップ2018 in ふくい","型技術ワークショップ2018 in ふくい 講演論文集",,,,"pp. 60-61",2018,Nov.
"齊藤卓志,野口侑希,KC Indra Bahadur,東孝祐,福谷和久,川口達也,佐藤勲","シングルローターにより攪拌される粘弾性流体の実験的解析","熱工学コンファレンス2018","日本機械学会熱工学コンファレンス2018講演論文集",,,"No. 18-29","  J224.pdf",2018,Oct.
"Tatsuya Kawaguchi,Takushi Saito,Isao Satoh","Ultrasound Flow Metering for the Distorted Velocity Distribution by Means of the Parallel Shift Method","11th International Symposium on Ultrasonic Doppler Methods for Fluid Mechanics and Fluid Engineering",,,,,"pp. 95-98",2018,Sept.
"鄭 有娜,川口 達也,齊藤 卓志,佐藤 勲","開口部を有する二重円筒プロテクタ内部流れの可視化","第46回可視化情報シンポジウム","第46回可視化情報シンポジウム講演論文集",,,,,2018,Sept.
"Takushi Saito,Satoshi Ihada,Tatsuya Kawaguchi,Isao Satoh","Thermal Conductivity Improvement of Fiber Orientation Control by Sheet Folding Method","First International Conference on 4D Materials and Systems","ECS Transactions",,"Vol. 88","No. 1","pp. 141-147",2018,Aug.
"Indra Bahadur KC,Kosuke Higashi,Yuki Noguchi,Tatsuya Kawaguchi,Isao Satoh,Takushi Saito","Temperature Distribution Analysis of Viscoelastic Fluid Stirred by Single Triangular Rotor","First International Conference on 4D Materials and Systems","ECS Transactions",,"Vol. 88","No. 1","pp. 149-155",2018,Aug.
"Tatsuya Kawaguchi,Yoona Jeong,Takushi Saito,Isao Satoh","Flow visualization in the cylindrical shrouds with apertures of the Oxygen sensor for the exhaust gas","18th International Symposium on Flow Visualization","Proc. 18th International Symposium on Flow Visualization",,,,,2018,June
"長谷川英紀,齊藤卓志,川口達也,佐藤勲,白石豊,造田敬一","薄膜発熱体による急速加熱金型の発熱挙動解析と転写性評価","プラスチック成形加工学会 第29回年次大会","成形加工'18",,,,"pp. 113-114",2018,June
"佐藤勲,齊藤卓志","エネルギー工学の観点から見た成形加工と金型温度制御","プラスチック成形加工学会 第30回年次大会","成形加工'18",,,,"pp. 101-102",2018,June
"Takushi Saito,Hideki Hasegawa,Tatsuya Kawaguchi,Isao Satoh,Yutaka Shiraishi,Kei-ichi Zouta","Evaluation of heating performance and its impact on surface transcription by rapid heating mold using thin electric heater","The 34th International Conference of the Polymer Processing Society","PROCEEDINGS OF PPS-34",,,,"  030005",2018,May
"K. Higashi,Y. Noguchi,K. Fukutani,Tatsuya. Kawaguchi,Isao Satoh,Takushi Saito","RHEOLOGICAL BEHAVIOR OF HIGH VISCOSITY FLUIDS AROUND A ROTATIONG BODY","11th Pacific Symposium on Flow Visualization and Image Processing","Proc. 11th Pacific Symposium on Flow Visualization and Image Processing",,,,,2017,Dec.
"齊藤卓志,曽我宏輔,石川和紀,川口達也,佐藤勲","フィラー添加高分子材料における絶縁破壊電圧の予測シミュレーション","プラスチック成形加工学会 第25回秋季大会","成形加工シンポジア'17",,,,"pp. 109-110",2017,Oct.
"Takushi Saito,Tatsuya Kawaguchi,Isao Satoh","Evaluation of Thermal Resistance at Welded Interface of Heterogeneous Polymer System","Asian Workshop on Polymer Processing 2017","Proceedings of AWPP2017",,,,"pp. 31-33",2017,Oct.
"Takushi Saito,Takaya Banno,Tatsuya Kawaguchi,Isao Satoh","Estimation of Interfacial Thermal Resistance of Polymer Materials with Layer Structure by Effective Thermal Conductivity Measurement","The 9th JSME-KSME Thermal and Fluids Engineering Conference","Extended Abstracts of TFEC9",,,,"  TFEC9-1639",2017,Oct.
"曽我宏輔,齊藤卓志,石川和紀,川口達也,佐藤勲","フィラー添加高分子材料における短時間絶縁破壊の破壊電圧予測",,"熱物性",,"Vol. 31","No. 3","pp. 131-136",2017,July
"野口侑希,東孝祐,福谷和久,齊藤卓志,川口達也,佐藤勲","粒子画像流速計測法を用いた粘弾性流体の混練挙動解析","第28回プラスチック成形加工学会年次大会","成形加工'17",,,,"pp. 99-100",2017,June
"齊藤卓志,伴野貴哉,川口達也,佐藤勲","高分子材料の接合界面における熱抵抗の評価","プラスチック成形加工学会 第28回年次大会","成形加工'17",,,,"pp. 125-126",2017,June
"Kosuke Soga,Takushi Saito,Tatsuya Kawaguchi,Isao Satoh","Percolation Effect on Thermal Conductivity of Filler-Dispersed Polymer Composites",,"Journal of Thermal Science and Technology",,"Vol. 12","No. 1",,2017,June
"曽我宏輔,齊藤卓志,佐藤勲,川口達也","高熱伝導・高耐電圧を実現するセラミックスフィラー添加高分子複合材料の設計指針","第54回日本伝熱シンポジウム","第54回日本伝熱シンポジウム講演論文集CD-ROM",,,,,2017,May
"Takushi Saito,Tatsuya Kawaguchi,ISAO SATOH","Application of Heat Transfer Control in Thermoplastic Polymer Processing","Asian Workshop on Polymer Processing 2016","Program & Abstract Book of AWPP2016",,,,"  KN029",2016,Nov.
"Yang Ming Fan,Takushi Saito,Tatsuya Kawaguchi,Isao Satoh","Study of Surface Wetting Control by Metal Nano-particles and Thermal Treatment","The 4th International Forum on Heat Transfer","Proceedings of The 4th International Forum on Heat Transfer",,,,"  IFHT2016-1924",2016,Nov.
"Kosuke Soga,Takushi Saito,Kazunori Ishikawa,Tatsuya Kawaguchi,Isao Satoh","Numerical Analysis of the Percolation Path Effect on the Thermal Conductivity in Composite Material","The 4th International Forum on Heat Transfer","Proceedings of the 4th International Forum on Heat Transfer",,,,"  IFHT2016-1964",2016,Nov.
"齊藤卓志,前川恵哉,川口達也,佐藤勲","ペレット状の熱可塑性高分子材料の乾燥挙動解析","日本機械学会熱工学コンファレンス2016","日本機械学会熱工学コンファレンス2016講演論文集",,,,"  E115.pdf",2016,Oct.
"前川恵哉,齊藤卓志,川口達也,佐藤勲","水分拡散係数の温度依存性を考慮した樹脂ペレットの乾燥挙動シミュレーション","成形加工シンポジア'16","成形加工シンポジア'16予稿集",,,,"pp. 112-113",2016,Oct.
"Takushi Saito,Tatsuya Kawaguchi,Isao Satoh","Selective Laser Irradiation to Immiscible Polymer Blend for Dispersion Control","Polymer Processing Society Asia/Australia Conference 2016","Proceedings of PPS-2016",,,,"  S-09-334-O",2016,Oct.
"Kei Kuramoto,Tatsuya Kawaguchi,Isao Satoh,Takushi Saito","Flow rate measurement after 90 degrees bended pipe using multi-path ultrasound shift method","10th International Symposium on Ultrasonic Doppler Methods for Fluid Mechanics and Fluid Engineering",,,,,,2016,Sept.
"齊藤卓志,川口達也,佐藤勲","ふく射加熱による熱可塑性プラスチック成形加工の高度化","第65回高分子討論会","高分子学会予稿集",,"Vol. 65","No. 2","  3J02.pdf",2016,Sept.
"田島 淳,川口達也,佐藤 勲,齊藤卓志","上面冷却された内部発熱矩形キャビティ内に発生する下降流の速度場解析","日本流体力学会年会 2016","日本流体力学会年会 2016講演論文集",,,,,2016,Sept.
"川口 達也,蔵本 圭,齊藤 卓志,佐藤 勲","超音波シフト法による管内非軸対称流に適用可能な気体流量計の開発","第44回可視化情報シンポジウム","可視化情報",,"Vol. 36","No. 1",,2016,July
"川口 達也,齊藤 卓志,佐藤 勲","レーザ誘起蛍光法を用いた低アスペクト比同軸二重円筒内流れの可視化","第44回可視化情報シンポジウム","可視化情報",,"Vol. 36","No. 1",,2016,July
"西田英耕,齊藤卓志,川口達也,佐藤勲,白石豊,秋田励紀,造田敬一","薄膜発熱体による金型温度制御の表面転写性への影響","第27回プラスチック成形加工学会年次大会","成形加工'16",,,,"pp. 135-136",2016,June
"森?洋次郎,齊藤卓志,川口達也,佐藤勲","選択ふく射加熱による非相溶ブレンド分散制御の押出プロセスへの適用","第27回プラスチック成形加工学会年次大会","成形加工'16",,,,"pp. 101-102",2016,June
"曽我宏輔,齊藤卓志,石川和紀,佐藤勲,川口達也","セラミックスフィラー添加高分子材料の熱伝導および電気絶縁特性の数値解析","第53回日本伝熱シンポジウム","第53回日本伝熱シンポジウム講演論文集CD-ROM",,,,"  Paper-1729.pdf",2016,May
"川口達也,田島淳,佐藤勲,齊藤卓志","矩形キャビティにおける内部発熱を伴う自然対流の流動解析","第53回日本伝熱シンポジウム","第53回日本伝熱シンポジウム講演論文集CD-ROM",,,,"  Paper-1636.pdf",2016,May
"Kosuke Soga,Takushi Saito,Tatsuya Kawaguchi,Isao Satoh","Effect of Inclusions on Dielectric Breakdown of Thin Polymer Film","The First Pacific Rim Thermal Engineering Conference","Proceedings of PRTEC2016",,,,"  PRTEC-14969",2016,Mar.
"Takushi Saito,Tatsuya Kawaguchi,Isao Satoh","Efficiency Improvement of Temperature Control of Injection Molding Molds for Polymer Processing","The First Pacific Rim Thermal Engineering Conference","Proceedings of PRTEC2016",,,,"  PRTEC-15085",2016,Mar.
"Doan, D.H.,TAKUSHI SAITO,Kawaguchi, T.,Satoh, I.","Dispersion control of immiscible polymer blend using selective heating by infrared laser irradiation: Numerical study",,"AIP Conference Proceedings",,"Vol. 1779",,,2016,
"小川 翔,川口 達也,佐藤 勲,齊藤 卓志","Light field PIVによる三次元流速測定法の測定精度に関する検討","日本機械学会 熱工学コンファレンス2014",,,,,,2015,Nov.
"蔵本 圭,川口  達也,佐藤 勲,齊藤  卓志","多線超音波シフト法による助走区間不要な気体流量計の開発","第92期 日本機械学会流体工学部門 講演会",,,,,,2015,Oct.
"齊藤卓志,ドアン ホン ドク,川口達也,佐藤勲","赤外ふく射加熱による高分子ブレンドの分散制御","日本機械学会熱工学コンファレンス2015","日本機械学会熱工学コンファレンス2015講演論文集",,,,"  E214.pdf",2015,Oct.
"蔵本 圭,川口 達也,佐藤 勲,齊藤 卓志","多線超音波シフト法を用いた曲がり管直後における流量 計測精度の検証","第 20 回動力・エネルギー技術シンポジウム",,,,,,2015,June
"川口達也,小川翔,佐藤勲,齊藤卓志","Light field PIVにおける受光光学系が空間分解能に与える影響","第52回日本伝熱シンポジウム","第52回日本伝熱シンポジウム講演論文集",,,,"  G211, Paper-1266",2015,June
"曽我宏輔,齊藤卓志,佐藤勲,川口達也","熱電場を考慮したフェーズフィールド法による絶縁破壊シミュレーション","第52回日本伝熱シンポジウム","第52回日本伝熱シンポジウム講演論文集",,,,"  I323, Paper-1332",2015,June
"蔵本圭,川口達也,佐藤勲,齊藤卓志","超音波シフト法を用いた気体流量計におけるシフト量測定法に関する比較検討","第52回日本伝熱シンポジウム","第52回日本伝熱シンポジウム講演論文集",,,,"  SP207, Paper-1291",2015,June
"西田英耕,齊藤卓志,川口達也,佐藤勲,白石豊,秋田励紀,造田敬一,下舞健","薄膜発熱体による金型表面温度分布の制御手法の検討","第26回プラスチック成形加工学会年次大会","成形加工'15",,,,"pp. 155-156",2015,June
"齊藤卓志,川口達也,佐藤勲","非晶性樹脂の吸湿によるふく射吸収変化を利用したレーザー透過接合法の検討",,"成形加工",,"Vol. 27","No. 4","pp. 151-156",2015,Mar.
"横山有成,齊藤卓志,川口達也,佐藤勲","金属ナノインクの塗布性に与える基板表面前処理の影響","第22回プラスチック成形加工学会秋季大会","成形加工シンポジア'14",,,,"pp. 281-282",2014,Nov.
"ストジャリットタム ジャルチャイ,佐藤 勲,TAKUSHI SAITO,川口 達也","G0610202 デシカント材を利用した急速加熱/冷却システムの研究([G061-02]熱工学部門一般セッション(2)伝熱II)",,"年次大会 : Mechanical Engineering Congress, Japan","一般社団法人日本機械学会","Vol. 2014",,"pp. "G0610202-1"-"G0610202-5"",2014,Sept.
"Takushi Saito,Tatsuya Kawaguchi,Isao Satoh","Fundamental Study on Agglomeration Control of Metallic Nano-particles by Thermal Treatment","15th International Heat Transfer Conference","Proceedings of the 15th International Heat Transfer Conference",,,,"  IHTC15-9321",2014,Aug.
"Tatsuya KAWAGUCHI*,Takushi SAITO,Isao SATOH","Volumetric reconstruction of particulate dispersions from a light field image by means of a plenoptic camera","?17th International Symposium on Applications of Laser Techniques to Fluid Mechanics",,,,,,2014,July
"S. OGAWA,T. KAWAGUCHI,I. SATOH,T. SAITO","RECONSTRUCTION OF VOLUMETRIC PARTICULE FIELD FROM A LIGHT FIELD IMAGE","16th International Symposium on Flow Visualization",,,,,,2014,June
"西田英耕,齊藤卓志,川口達也,佐藤勲,白石豊,秋田励紀,造田敬一","射出金型表面温度分布に与える薄膜発熱体の構造不均一性の影響","プラスチック成形加工学会第25回年次大会","成形加工'14",,,,"pp. 253-254",2014,June
"横山 有成,佐藤 勲,齊藤 卓志,川口 達也","銀ナノ粒子表面における凝集防止層の熱分解挙動のモデル化","プラスチック成形加工学会第25回年次大会","成形加工'14",,,,"pp. 189-190",2014,June
"小宮山 智哉,Kazunori Ishikawa,齊藤 卓志,川口 達也,佐藤 勲","窒化ホウ素の分散状況による樹脂材料の熱伝導率変化","プラスチック成形加工学会第25回年次大会","成形加工'14",,,,"pp. 111-112",2014,June
"Takushi Saito,Tomoya Komiyama,Ishikawa Kazunori,Tatsuya Kawaguchi,Isao Satoh","Experimental Analysis of Micro-scale Structure of Polymer Sheet Containing Boron-nitride","30th International Conference of the Polymer Processing Society","Proceedings of PPS30",,,,"  05-652.pdf",2014,June
"川口達也,阿部尭,佐藤勲,齊藤卓志","ナノバブルのブラウン運動に対する界面活性剤の影響","第51回日本伝熱シンポジウム","第51回日本伝熱シンポジウム講演論文集",,,,"  E323.pdf",2014,May
"小川 翔,川口達也,佐藤勲,齊藤卓志","Light Field Cameraを用いた流動場内の粒子群像の三次元再構成","第51回日本伝熱シンポジウム","第51回日本伝熱シンポジウム講演論文集",,,,"  FSP402.pdf",2014,May
"岩附信行,齋藤義夫,齊藤卓志","機械設計教育と連動した創造性育成科目（東京工業大学工学部機械知能システム学科「機械知能システム創造」について）","Designシンポジウム2014","Designシンポジウム2014USB講演論文集","日本設計工学会",,,"pp. 1-4",2014,
"TAKUSHI SAITO,Tatsuya Kawaguchi,Isao Satoh","Controlled Rapid Heating of Mold Surface by Thin Electrical Heating Element","Asian Workshop on Polymer Processing 2013","Proceedings of AWPP2013",,,,"pp. 69",2013,Dec.
"齊藤卓志,川口達也,佐藤勲","赤外ふく射特性の温度依存性を考慮したポリプロピレンフィルムの温度計測","成形加工シンポジア'13","成形加工シンポジア'13予稿集",,,,"pp. 315-316",2013,Nov.
"T Abe,T Kawaguchi,TAKUSHI SAITO,ISAO SATOH","Molecular dynamics analysis for the Brownian motion of nano bubble","III International Conference on Particle-based Methods","Proc. III International Conference on Particle-based Methods",,,,,2013,Sept.
"Takushi Saito,Tatsuya Kawaguchi,Isao Satoh","Dispersion control of immiscible polymer blend using selective heating by infrared laser irradiation",,"Journal of Applied Polymer Science",,"Vol. 129",,"pp. 3606-3612",2013,Sept.
"阿部尭,川口達也,齊藤卓志,佐藤勲","分子動力学によるナノバブルのブラウン運動解析","混相流シンポジウム2013","混相流シンポジウム2013講演論文集",,,,,2013,Aug.
"ヨウシイ,川口達也,齊藤卓志,佐藤勲","超音波シフト法の多線化による流量計測","第41回可視化情報シンポジウム","可視化情報シンポジウム講演論文集",,,,,2013,July
"Jun Taniguchi,Hiroshi Ito,Jun Mizuno,Takushi Saito","Nanoimprint Technology",,,"John Wiley & Sons Ltd",,,,2013,July
"小林哲,齊藤卓志,佐藤勲,川口達也","銀ナノ粒子の電気抵抗率に与える熱処理条件の影響","成形加工'13","成形加工'13講演予稿集",,,,"pp. 183-184",2013,May
"川口達也,齊藤卓志,佐藤勲","Light Field Cameraを用いたPIV計測","第50回日本伝熱シンポジウム","第50回日本伝熱シンポジウム講演論文集",,,,,2013,May
"小宮山智哉,石川和紀,佐藤勲,齊藤卓志,川口達也","窒化ホウ素を分散させた樹脂材料の温度伝播評価","第50回日本伝熱シンポジウム","第50回日本伝熱シンポジウム講演論文集",,,,,2013,May
"尾崎展也,齊藤卓志,川口達也,佐藤勲","薄膜発熱体による金型表面温度制御に関する基礎的検討","成形加工'13","成形加工'13講演論文集",,,,"pp. 9-10",2013,May
"Pudpong, T.,Buahom, P.,Areerat, S.,Rungseesantivanon, W.,Satoh, I.,TAKUSHI SAITO","The effects of processing parameters on the residual wall thickness distribution at the sharp angle corner of water assisted injection molded parts",,"International Polymer Processing",,"Vol. 28","No. 5","pp. 528-540",2013,
"川口達也,齊藤卓志,佐藤勲","ダイナミック干渉画像法の測定精度に関する検討","第21回 微粒化シンポジウム","第21回微粒化シンポジウム講演論文集",,,,,2012,Dec.
"齊藤卓志,小林哲,川口達也,佐藤勲","銀ナノインクの導電性に与える処理条件の影響","成形加工シンポジア'12","成形加工シンポジア'12講演論文集",,,,"pp. 297-298",2012,Nov.
"Tatsuya Kawaguchi,TAKUSHI SAITO,ISAO SATOH","High-speed ILIDS measurement of evaporating droplet","12th Triennial International Conference on Liquid Atomization and Spray Systems","Proc. 12th Triennial International Conference on Liquid Atomization and Spray Systems",,,,,2012,Sept.
"Tomoya Komiyama,Takushi Saito,Tatsuya Kawaguchi,Isao Saoth","Fabrication of Electrically Conductive Part on Resin Substrate by Carbon Dioxide Laser Irradiation to Silver Nanoink","Asian Workshop on Polymer Processing 2012","Proceedings of the AWPP2012",,,,"pp. 40-41",2012,Aug.
"Ziwei Yang,Isao Satoh,Takushi Saito,Tatsuya Kawaguchi","Evaluation of Mold Temperature Control System in Injection Molding by Using Heat Exchange with Water/Vapor Phase Change","Asian Workshop on Polymer Processing 2012","Proceedings of the AWPP2012",,,,"pp. 60-61",2012,Aug.
"吉野雅彦,大竹尚登,山本貴富喜,山中晃徳,中村吉男,安田公一,齊藤卓志,源関聡,津島将司,黒川悠,井上裕嗣,山?敬久,野崎智洋,鈴木俊明,梅原徳次,近藤行人,松村隆,楊明,月山陽介,益満秀治,赤上陽一,久住孝幸,上坂裕之,野老山貴行,品川一成,新保實,平山朋子,早川邦夫,坂井田喜久,鈴木清一,柏谷智","機械屋のための分析装置ガイドブック（日本塑性加工学会編）",,,"コロナ社",,,"pp. 167-177",2012,Aug.
"Tatsuya Kawaguchi,TAKUSHI SAITO,ISAO SATOH","Experimental analysis of natural convection with Joule heating by means of particle image velocimetry","16th Int. Symp. on Applications of Laser Techniques to Fluid Mechanics","proc. 16th Int. Symp. on Applications of Laser Techniques to Fluid Mechanics",,,,,2012,July
"谷村貴大,齊藤卓志,佐藤勲,川口達也","環境によるポリ乳酸フィルムの表面性状変化の検討","成形加工'12","成形加工'12講演論文集",,,,"pp. 231-232",2012,June
"小宮山智哉,齊藤卓志,川口達也,佐藤勲","銀ナノインクへの赤外線レーザー照射による樹脂基板表面での薄膜導電パス形成","成形加工'12","成形加工'12講演論文集",,,,"pp. 187-188",2012,June
"ヨウシイ,佐藤勲,齊藤卓志,川口達也","水の相変化を伴う熱移動を利用した金型加熱/冷却に関する研究","成形加工'12","成形加工'12講演論文集",,,,"pp. 111-112",2012,June
"阿部尭,川口達也,齊藤卓志,佐藤勲","音響タフト法による超音波気体流量計の開発","第49回日本伝熱シンポジウム","第49回日本伝熱シンポジウム講演論文集",,"Vol. I+II",,"pp. 123-124",2012,May
"齊藤卓志,朴鍾協,川口達也,佐藤勲","炭酸ガスレーザー照射による樹脂成形体表面への導電性パターン形成の試み",,"成形加工",,"Vol. 24","No. 6","pp. 341-343",2012,May
"関口智大,川口達也,齊藤卓志,佐藤勲","ナノバブルのブラウン運動に与える界面構造の影響","第49回日本伝熱シンポジウム","第49回日本伝熱シンポジウム講演論文集",,"Vol. I+II",,"pp. 45-46",2012,May
"曽我宏輔,佐藤勲,齊藤卓志,川口達也","アルミニウム空気電池のメカニカルチャージによる二次電池化","第49回日本伝熱シンポジウム","第49回日本伝熱シンポジウム講演論文集",,"Vol. III",,"pp. 549-550",2012,May
"川口 達也,齊藤 卓志,佐藤 勲","ダイナミックレーザ干渉画像法による液滴蒸発過程の多次元計測",,"日本機械学会論文集Ｂ編",,"Vol. 77","No. 784",,2011,Dec.
"関口 智大,川口 達也,齊藤 卓志,佐藤 勲","マイクロ・ナノバブルのブラウン運動の画像解析",,"日本機械学会論文集Ｂ編",,"Vol. 77","No. 784",,2011,Dec.
"齊藤卓志,楊子?,川口達也,佐藤勲","ヒートパイプによる効率的な成形金型温度コントロール","型技術ワークショップ2011","型技術ワークショップ2011講演論文集",,,,"pp. 118-119",2011,Nov.
"石見浩之,福岡正義,斉藤卓志,濱田泰以","射出成形における”表面転写/裏面ヒケ”現象のメカニズム解明と実用可能性の探究",,"成形加工",,"Vol. 23","No. 11","pp. 667-674",2011,Oct.
"齊藤卓志,川口達也,佐藤勲","イオン液体を用いたマイクロ流動のSEM観察","成形加工シンポジア'11","成形加工シンポジア'11講演予稿集",,,,"pp. 295-296",2011,Oct.
"中城啓太,齊藤卓志,川口達也,佐藤勲","ヒートパイプによる成形金型の加熱・冷却システムの研究","日本機械学会2011年度年次大会","日本機械学会2011年度年次大会講演予稿集",,,,"  G060024.pdf",2011,Sept.
"関口智大,川口達也,齊藤卓志,佐藤勲","ナノバブルのブラウン運動と帯電性の解析","日本機械学会2011年度年次大会","日本機械学会2011年度年次大会講演予稿集",,,,"  J054072.jpg",2011,Sept.
"鷲頭伸一,川口達也,齊藤卓志,佐藤勲","粒子法による非ニュートン流体の塗布工程の検討","成形加工'11","成形加工'11講演論文集",,,,"pp. 79-80",2011,June
"鷲頭伸一,川口達也,齊藤卓志,佐藤勲","自由表面を持つ非ニュートン流体の粒子法シミュレーション","第48回日本伝熱シンポジウム","第48回日本伝熱シンポジウム講演論文集",,"Vol. II+III",,"pp. 429-430",2011,June
"近藤昌孝,川口達也,齊藤卓志,佐藤勲","SEM-PIVによるマイクロ流路内の流動計測","第48回日本伝熱シンポジウム","第48回日本伝熱シンポジウム講演論文集",,"Vol. 1",,"pp. 271-272",2011,June
"Takushi Saito,Tatsuya Kawaguchi,Isao Satoh","A Study on Micro-scale Flow Behavior of Thermoplastic Polymeric Material",,"Journal of Photopolymer Science and Technology",,"Vol. 24","No. 1","pp. 83-88",2011,June
"T.Kawaguchi,M.Kondo,I.Satoh,T.Saito","Microscale visualization of ionic liquid in open channel by scanning electron microscope","11th Asian Symposium on Visualization","Proceedings of the 11th Asian Symposium on Visualization,",,,,,2011,May
"Takushi Saito,Tatsuya Kawaguchi,Isao Satoh","Formation of Electro-Conductive Part on Polymeric Material Surface by CO2 Laser Irradiation","The 8th ASME-JSME Thermal Engineering Joint Conference","Proceedings of the 8th ASME-JSME Thermal Engineering Joint Conference",,,,"  AJTEC2011-44455.pdf",2011,Mar.
"Tomohiro Sekiguchi,Tatsuya Kawaguchi,Isao Satoh,Takushi Saito","Electric Charge of Micro and Nano Bubbles by Interferometric Laser Imaging Technique","The 8th ASME-JSME Thermal Engineering Joint Conference","Proceedings of the 8th ASME-JSME Thermal Engineering Joint Conference",,,,"  AJTEC2011-44612.pdf",2011,Mar.
"Nakngoenthong, J.,Naksuk, N.,Kanarat, A.,TAKUSHI SAITO","Supervisory level control of robot plasma spray coating process with task level modification based on process database",,"ECTI-CON 2011 - 8th Electrical Engineering/ Electronics, Computer, Telecommunications and Information Technology (ECTI) Association of Thailand - Conference 2011",,,,"pp. 569-572",2011,
"Takushi Saito,Tatsuya Kawaguchi,Isao Satoh","Distribution Measurement of Refractive Index in Injection Molded Transparent Products by Interferometric Computer Tomography","The 9th Asian Workshop on Polymer Processing","Proceedings of the 9th Asian Workshop on Polymer Processing",,,,"pp. 366-369",2010,Dec.
"Tatsuya KAWAGUCHI,Isao SATOH,Takushi SAITO","Lagrangian diagnostics of evaporating spray system by means of high-speed camera and Nd:YLF laser","5th International Symposium on Advanced Science and Technology in Experimental Mechanics","Proc. 5th International Symposium on Advanced Science and Technology in Experimental Mechanics",,,,,2010,Nov.
"Tatsuya Kawaguchi,Isao Satoh,Takushi Saito","EXPERIMENTAL AND NUMERICAL INVESTIGATIONS OF THE  COATING PROCESS OF MELT-TRANSCRIPTION MOLDING PROCESS","Polymer Processing Society 26th Regional Meeting","Proceedings of the Polymer Processing Society 26th Regional Meeting",,,,,2010,Oct.
"川口 達也,齊藤 卓志,佐藤 勲","狭隘なせん断場に流入する非ニュートン流体の PIV 計測","可視化情報学会2010年全国講演会","可視化情報学会2010年全国講演会講演論文集",,,,,2010,Sept.
"Tatsuya Kawaguchi,I.Satoh,T.Saito","Dynamic ILIDS measurement by means of high-speed Nd:YLF laser","23rd Annual Conference on Liquid Atomization and Spray Systems","Proceedings of the 23rd Annual Conference on Liquid Atomization and Spray Systems",,,,,2010,Sept.
"齊藤卓志,川口達也,佐藤勲","可視化観察による熱インプリントプロセスの特徴把握と実験的考察",,"電気学会論文誌E（センサ・マイクロマシン部門誌）","電気学会","Vol. 130","No. 8","pp. 356-362",2010,Aug.
"Takushi Saito,Tatsuo Kurebayashi,Tatsuya Kawaguchi,Isao Satoh","A Study on New Transmission Laser Welding Utilizing Moisture Adsorption of Amorphous Polymeric Material","The Polymer Processing Society 26th Annual Meeting","Proceedings of the Polymer Processing Society 26th Annual Meeting","The Polymer Processing Society",,,"  R02-410.pdf",2010,Aug.
"神岡紀明,川口達也,佐藤勲,齊藤卓志","マイクロバブルのゼータ電位及び径に与える発生条件・界面活性剤の影響","日本混相流学会年会講演会2010","日本混相流学会年会講演会2010講演論文集",,,,,2010,July
"Tatsuya KAWAGUCHI,Shinichi Washizu,Isao SATOH,Takushi SAITO","Experimental and numerical investigation of melt-transcription  molding process","4th International?Conference?on?Advanced?Computational?Engineering?and?Experimenting","Proceedings of the 4TH International?Conference?on?Advanced?Computational?Engineering?and?Experimenting",,,,,2010,July
"児玉健次,齊藤卓志,川口達也,佐藤勲","マイクロスケール熱インプリントの可視化観察による転写状況の詳細検討","成形加工'10","成形加工'10講演論文集","プラスチック成形加工学会",,,"pp. 167-168",2010,June
"鷲頭伸一,川口達也,齊藤卓志,佐藤勲","粒子法を用いた流動解析による塗布成形のパラメータ検討","成形加工'10","成形加工'10講演論文集","プラスチック成形加工学会",,,"pp. 169-170",2010,June
"宮川紘一,齊藤卓志,川口達也,佐藤勲","炭酸ガスレーザー照射による樹脂材料表面の局所炭化と導電性の実現","成形加工'10","成形加工'10講演論文集","プラスチック成形加工学会",,,"pp. 99-100",2010,June
"榑林達夫,齊藤卓志,川口達也,佐藤勲","ふく射吸収係数が制御されたレーザー透過接合手法による接合強度の評価","成形加工'10","成形加工'10講演論文集","プラスチック成形加工学会",,,"pp. 63-64",2010,June
"関口智大,川口達也,齊藤卓志,佐藤勲","回転検光子法とCTを組み合わせた透明高分子材料内部の複屈折分布測定","成形加工'10","成形加工'10講演論文集","プラスチック成形加工学会",,,"pp. 23-24",2010,June
"神岡紀明,川口達也,佐藤勲,齊藤卓志","加圧溶解法により生成されたマイクロ・ナノバブルの帯電特性","第47回日本伝熱シンポジウム","第47回日本伝熱シンポジウム講演論文集","日本伝熱学会","Vol. 2+3",,"pp. 461-462",2010,May
"齊藤卓志,宮川紘一,川口達也,佐藤勲","レーザー照射による高分子材料への導電性付与","第47回日本伝熱シンポジウム","第47回日本伝熱シンポジウム講演論文集","日本伝熱学会","Vol. 2+3",,"pp. 489-490",2010,May
"鷲頭伸一,川口達也,齊藤 卓志,佐藤 勲","粒子法による溶融樹脂の塗布挙動シミュレーション","第24回数値流体力学シンポジウム","第24回数値流体力学シンポジウム講演論文集",,,,,2010,May
"Takushi Saito,Tastuya Kawaguchi,Isao Satoh","Laser Transmission Welding Technique Utilizing Change of Absorption Coefficient of Material by Moisture Adsorption","Asian Workshop on Polymer Processing 2009","Extended Abstracts of Asian Workshop on Polymer Processing 2009","The Japan Society of Polymer Processing",,,"  B-214.pdf",2009,Dec.
"川口 達也,佐藤 勲,齊藤 卓志","光散乱の画像処理によるマイクロバブルの複合計測","可視化情報全国講演会2009","可視化情報全国講演会2009講演論文集",,,,"  F116",2009,Oct.
"川口達也,佐藤勲,齊藤卓志,伊東宏","PIVによる高粘度流体塗布過程の可視化","可視化情報全国講演会2009","可視化情報全国講演会2009講演論文集",,,,"  D104",2009,Oct.
"齊藤卓志,佐藤勲,川口達也","圧縮成形された透明部品内部の屈折率分布に与える成形条件の影響","成形加工シンポジア'09","成形加工シンポジア'09講演予稿集","プラスチック成形加工学会",,,"pp. 163-164",2009,Oct.
"斉藤卓志,川口達也,佐藤勲","レーザー干渉コンピュータトモグラフィによる透明成形品内部の屈折率分布測定",,"成形加工",,"Vol. 21","No. 10","pp. 590-594",2009,Sept.
"神岡 紀明,川口 達也,佐藤 勲,齊藤 卓志","電界中の微細気泡挙動の干渉画像計測",,"日本機械学会2009年度年次大会",,,,"  J0502-1-5",2009,Sept.
"斉藤卓志","実は奥深いナノインプリント技術",,"精密工学会誌",,"Vol. 75","No. 8","pp. 958-961",2009,Aug.
"Tatsuya Kawaguchi,Isao. Satoh,Takushi. Saito,Hiroshi Ito","PIV analysis of Melt?Transcription Molding Process","8th International symposium on particle image velocimetry","Proceedings of the 8th International symposium on particle image velocimetry",,,,"  PIV09-0074",2009,Aug.
"神岡 紀明,川口 達也,佐藤 勲,齊藤 卓志","電界中の微細気泡挙動の可視化","第37回可視化情報シンポジウム","第37回可視化情報シンポジウム講演論文集",,,,"  P03-001",2009,July
"伊東宏,佐藤勲,斉藤卓志,焼本和利","微細形状転写プロセスにおけるスタンパと溶融ポリマーとの粘着効果",,"成形加工",,"Vol. 21","No. 8","pp. 499-509",2009,July
"伊東宏,佐藤勲,斉藤卓志,焼本和利","熱可塑性樹脂製品への微細形状転写における粘着効果に関する研究","成形加工'09","成形加工'09講演論文集","プラスチック成形加工学会",,,"pp. 357-358",2009,June
"北村弘通,佐藤勲,斉藤卓志,川口達也,柏木孝夫","ハイブリッドデシカント空調用デシカントの吸脱着特性","第46回日本伝熱シンポジウム","第46回日本伝熱シンポジウム講演論文集","日本伝熱学会","Vol. 1",,"pp. 133-134",2009,June
"齊藤卓志,岩本篤,川口達也,佐藤勲","水分吸着による材料の吸収係数変化を利用したレーザー透過接合手法","成形加工'09","成形加工'09講演論文集","プラスチック成形加工学会",,,"pp. 231-232",2009,June
"児玉健次,斉藤卓志,川口達也,佐藤勲","効率的に微細転写状況を可視化観察する装置の開発","成形加工'09","成形加工'09講演論文集","プラスチック成形加工学会",,,"pp. 403-404",2009,June
"伊東宏,佐藤勲,斉藤卓志,焼本和利","溶融樹脂の塗布による微細転写挙動の基礎的研究",,"成形加工","プラスチック成形加工学会","Vol. 21","No. 2","pp. 94-102",2009,Feb.
"齊藤卓志,真鍋礼男,南博昭,大塚正人,川口達也,佐藤勲","射出成形品からの薄片切り出しによる試料内複屈折への影響","成形加工シンポジア'08","成形加工シンポジア'08講演論文集","プラスチック成形加工学会",,,"pp. 161-162",2008,Nov.
"TAKUSHI SAITO,Motoki Noko,Tatsuya Kawaguchi,Isao Satoh","Small Scale Molding System for Thermoplastic Materials using Strong Ultrasonic Vibration","3rd JSME/ASME International Conference on Material and Processing","Proceedings of the 3rd JSME/ASME International Conference on Material and Processing",,,,"  MSEC_ICM&P2008-72092",2008,Oct.
"Takushi Saito,Motoki Noko,Tatsuya Kawaguchi,Isao Satoh","Fundamental Study of Molding System for Thermoplastic Materials using Ultrasonic Vibration","The Second International Forum on Heat Transfer (IFHT2008)","Proceedings of the Second International Forum on Heat Transfer (IFHT2008)",,,,"  203.pdf",2008,Sept.
"齊藤卓志,井手慎之介,伊藤浩志,安原鋭幸,川口達也,佐藤勲","ポリプロピレン薄肉射出成形品のウェルドに関する研究",,"成形加工",,"Vol. 20","No. 10","pp. 776-780",2008,Sept.
"Tatsuya Kawaguchi,ISAO SATOH,TAKUSHI SAITO","Novel interferometric laser imaging for spray and microbubble sizing ? one of the successful Mie scattering applications","Mie Theory 1908-2008, present developments and interdisciplinary aspects of light scattering","Proceedings of the workshop “Mie Theory 1908 - 2008: Present developments and interdisciplinary aspects of light scattering”",,,,,2008,Sept.
"TAKUSHI SAITO,ISAO SATOH,Tatsuya Kawaguchi","Micro Molding System for Thermoplastic Materials Using Strong Ultrasonic Wave","Asian Workshop on Polymer Processing 2008 (AWPP2008)","Proceedings of the Asian Workshop on Polymer Processing 2008 (AWPP2008)",,,,,2008,Aug.
"Tatsuya Kawaguchi,ISAO SATOH,TAKUSHI SAITO","Visualization of microscale bubbles in fluid by interferometric laser imaging technique","13th International Symposium on Flow Visualization","Proceedingd of the 13th International Symposium on Flow Visualization",,,,,2008,July
"Takushi Saito,Hiroshi Ito,Tatsuya Kawaguchi,Isao Satoh","Study on Transcription Improvement by Visualization of Melt-transcription Molding Process","Polymer Processing Society 24th Annual Meeting","CD-ROM Proceedings of Polymer Processing Society 24th Annual Meeting",,,,"  S13-397.pdf",2008,June
"Takushi Saito,Hiroshi Ito,Tatsuya Kawaguchi,Isao Satoh","Study of Transcription Mechanism of Melt-transcription Molding Process","The 42nd IUPAC World Polymer Congress","CD-ROM Proceedings of The 42nd IUPAC World Polymer Congress",,,,"  551.pdf",2008,June
"遠藤淳生,佐藤勲,川口達也,斉藤卓志","干渉CT法による透明射出成形品内部の屈折率分布測定","第19回プラスチック成形加工学会年次大会","成形加工 ' 08",,,,"pp. 301-302",2008,June
"伊東宏,佐藤勲,斉藤卓志,焼本和利","溶融樹脂の塗布による微細転写挙動の基礎的研究","第19回プラスチック成形加工学会年次大会","成形加工'08",,,,"pp. 187-188",2008,June
"濃香元基,斉藤卓志,川口達也,佐藤勲","強力超音波を用いた熱可塑化樹脂用の小型成形システム","第19回プラスチック成形加工学会年次大会","成形加工'08",,,,"pp. 143-144",2008,June
"出川貴雅,川口達也,佐藤勲,斉藤卓志","レーザー干渉画像法による微細気泡の溶解挙動計測","第45回日本伝熱シンポジウム","第45回日本伝熱シンポジウム講演論文集",,"Vol. 1",,"pp. 373-374",2008,May
"斉藤卓志,花岡裕介,川口達也,佐藤 勲,杉山慎一,内藤実成,古野伸一","アルミフレークが添加された射出成形平板の外観評価に関する基礎的検討",,"成形加工シンポジア'07",,,,"pp. 173-174",2007,Nov.
"伊東 宏,佐藤 勲,斉藤卓志,焼本和利","溶融微細転写プロセスにおける微細転写挙動の基礎的研究",,"成形加工シンポジア'07",,,,"pp. 75-76",2007,Nov.
"濃香元基,斉藤卓志,川口達也,佐藤 勲","超音波加振を用いた熱可塑性樹脂成形システムの基礎検討",,"成形加工シンポジア'07",,,,"pp. 73-74",2007,Nov.
"斉藤卓志,伊東 宏,川口達也,佐藤 勲","高粘度流体の塗布プロセスにおける伸展挙動の可視化解析",,"可視化情報全国講演会講演論文集",,,,"pp. 149-150",2007,Oct.
"Takushi Saito,Isao Satoh,Tatsuya Kawaguchi","Local Radiation Heating Technique of Polymeric Materials using Functional-dye",,"Proc. 2007 ASME-JSME Thermal Engineering Summer Heat Transfer Conference",,,,"pp. HT2007-32909.pdf",2007,July
"斉藤卓志,西智規,川口達也,佐藤勲","材料のふく射吸収係数制御による透明樹脂内部の局所加熱手法の検討","成形加工'07","成形加工'07講演論文集",,,,"pp. 109-110",2007,June
"高岡俊允,河合伸典,大割寛,北川清一郎,風間邦彦,安原鋭幸,斉藤卓志,伊藤浩志","非晶性高分子材料における超微細構造を有する成形品の成形転写性と高次構造2","成形加工'07","成形加工'07講演論文集",,,,"pp. 221-222",2007,June
"原雄太,伊東宏,斉藤卓志,川口達也,佐藤勲","溶融微細転写プロセスをモデル化した高粘度流体の伸展挙動の可視化解析","成形加工'07","成形加工'07講演論文集",,,,"pp. 233-234",2007,June
"北村弘通,斉藤卓志,川口達也,佐藤勲","炭酸ガスレーザー加熱による高分子材料表面の自己組織化的構造形成の観察","成形加工'07","成形加工'07講演論文集",,,,"pp. 143-144",2007,June
"西智規,斉藤卓志,川口達也,佐藤勲","材料の光・熱刺激による物性変化を利用した選択加熱手法の検討","第44回日本伝熱シンポジウム","第44回日本伝熱シンポジウム講演論文集",,"Vol. 3",,"pp. 729-730",2007,May
"Hiroshi Ito,Isao Satoh,Takushi Saito,Kazutoshi Yakemoto","Development of a Novel Transcrption Molding Process to Fabricate Sophisticated Polymer Products with Precise Microstructure and High Transparency Applicable to Display Devices and Bio-chips",,"International Polymer Processing",,"Vol. 22","No. 2","pp. 155-165",2007,May
"平野峻之,川口達也,斉藤卓志,佐藤勲","強制対流場における有限縞干渉法を用いた曲面温度分布計測の精度向上の検討","第44回日本伝熱シンポジウム","第44回日本伝熱シンポジウム講演論文集",,"Vol. 1",,"pp. 17-18",2007,May
"Tatsuya Kawaguchi,Isao Satoh,Takushi Saito","Flow Visualization by Interferometric Laser Imaging for Bubble Sizing Technique","6th Pacific Symposium on Flow Visualization and Image Procesing","Proceedings of the 6th Pacific Symposium on Flow Visualization and Image Procesing",,,,"pp. CDROM (B05-2.pdf)",2007,May
"出川貴雅,川口達也,佐藤勲,斉藤卓志","干渉画像法を用いたマイクロバブル溶解挙動の計測","第44回日本伝熱シンポジウム","第44回日本伝熱シンポジウム講演論文集",,"Vol. 1",,"pp. 85-86",2007,May
"Yihua Gu,Isao Satoh,Takushi Saito,Tatsuya Kawaguchi","Heat Transfer in Segregated Fluidized Beds Part 2: Particle Motion and Its Effects on the Heat transfer in the Segregated Fluidized Beds",,"Journal of Thermal Science and Technology",,"Vol. 2","No. 1","pp. 55-66",2007,Apr.
"Yihua Gu,Isao Satoh,Takushi Saito,Tatsuya Kawaguchi","Heat Transfer in Segregated Fluidized Beds Part 1: Relation between Particle and Temperature Segregation and Dominating Heat Transfer Mechanisms",,"Journal of Thermal Science and Technology",,"Vol. 2","No. 1","pp. 43-54",2007,Apr.
"Takushi Saito,Isao Satoh,Tatsuya Kawaguchi","Visualization of Heat and Mass Transfer in Direct Embossing Process using Ultrasonic Wave Excitation","Asian Workshop on Polymer Processing 2006","Proceedings of Asian Workshop on Polymer Processing 2006",,,,"pp. 119-121",2006,Dec.
"斉藤卓志,川口達也,佐藤勲","転写から離型に至るホットエンボス加工の微視的観察","成形加工シンポジア'06","成形加工シンポジア'06講演論文集",,,,"pp. 31-32",2006,Nov.
"Takushi Saito,Atsushi Tajiri,Hiroshi Ito,Toshiyuki Yasuhara,Tatsuya Kawaguchi,Isao Satoh","Fundamental Study on Polymer Materials Temperature Measurement and Its Application to Precise Process Monitoring","Polymer Processing Society 22th Annual Meeting","CD-ROM Proceedings of Polymer Processing Society 22th Annual Meeting",,,,"pp. SP6-P02.pdf",2006,July
"Toshiyuki Yasuhara,Yasuyuki Araki,Hiroshi Aihara,Hiroshi Ito,Takushi Saito,Naoto Ohtake","Influence of Fiber Orientation on Mechanical Properties in Thin-wall Injection molding of CNF/PP Composites","Polymer Processing Society 22th Annual Meeting","CD-ROM Proceedings of Polymer Processing Society 22th Annual Meeting",,,,"pp. SP6-12.pdf",2006,July
"Takushi Saito,Tatsuya Kawaguchi,Isao Satoh","Visualization of Micro-scale Polymer Melt Filling during Hot Embossing Lithography Process","Polymer Processing Society 22th Annual Meeting","CD-ROM Proceedings of Polymer Processing Society 22th Annual Meeting",,,,"pp. SP5-08.pdf",2006,July
"Kunihiko Kazama,Hiroshi Ito,Toshiyuki Yasuhara,Takushi Saito,Takeshi Kikutani","Structure and Properties of Thin-wall Molded Products with Micro Surface Features","Polymer Processing Society 22th Annual Meeting","CD-ROM Proceedings of Polymer Processing Society 22th Annual Meeting",,,,"pp. SP6-10.pdf",2006,July
"Hiroshi Ito,Isao Satoh,Takushi Saito,Kazutoshi Yakemoto","A Melt-Transcription Process to Fabricate Thermoplastic Products with Homogeneous Surface Micro Structures Applied to Display Parts and Micro-Fluidic Devices","Polymer Processing Society 22th Annual Meeting","CD-ROM Proceedings of Polymer Processing Society 22th Annual Meeting",,,,"pp. SP6-17.pdf",2006,July
"高岡俊允,八尾和幸,北川清一郎,伊藤浩志,安原鋭幸,斉藤卓志","非晶性高分子材料における超微細構造を有する成形品の成形転写性と高次構造","成形加工'06","成形加工'06講演予稿集",,,,"pp. 33-34",2006,June
"伊藤浩志,風間邦彦,安原鋭幸,斉藤卓志,鞠谷雄士,林和樹,山極佳年,坂田雄一","マイクロ射出成形プロセスにおける超薄肉流路でのオンライン光学異方性計測","成形加工'06","成形加工'06講演予稿集",,,,"pp. 15-16",2006,June
"斉藤卓志,田尻篤史,伊藤浩志,安原鋭幸,佐藤勲,川口達也","接触界面温度測定によるプロセスモニタリングの可能性","成形加工'06","成形加工'06講演予稿集",,,,"pp. 277-278",2006,June
"磯崎佑允,佐藤勲,斉藤卓志,川口達也","超音波振動を利用した微細構造直接転写プロセスの基礎研究","成形加工'06","成形加工'06講演予稿集",,,,"pp. 185-186",2006,June
"古田真美,佐藤勲,斉藤卓志,川口達也","伝熱媒体の相変化を利用した射出成形金型の高速温度制御","成形加工'06","成形加工'06講演予稿集",,,,"pp. 177-178",2006,June
"由川格,佐藤勲,斉藤卓志,川口達也","エネルギー削減を目指した原料の気中予備溶解によるガラス溶融過程の検討","第43回日本伝熱シンポジウム","第43回日本伝熱シンポジウム講演論文集",,"Vol. 1",,"pp. 213-214",2006,May
"Tatsuya Kawaguchi,Isao Satoh,Takushi Saito","Surface temperature monitoring of convex molten polymer using interferometric tomography with direct cylindrical reconstruction : Measurement Science and Technology",,"Measurement Science and Technology",,"Vol. 17",,"pp. 2072-2077",2006,
"Takayuki Hirano,Tatsuya Kawaguchi,Isao Satoh,Takushi Saito","Non-intrusive temperature measurement of curved surface using laser interferometer and computer tomography","13th International Symposium on Applications of Laser Techniques to Fluid Mechanics","Proceedings of 13th International Symposium on Applications of Laser Techniques to Fluid Mechanics",,,,"pp. 03_3.pdf",2006,
"風間邦彦,伊藤浩志,安原鋭幸,斉藤卓志,鞠谷雄士,國本栄起,小林博行","微小プリズム表面を有する薄肉成形品の転写性と高次構造","成形加工シンポジア'05","成形加工シンポジア'05予稿集",,,,"pp. 253-254",2005,Nov.
"齋藤義夫,齊藤卓志,原精一郎","モノづくりと創造性教育（機械知能システム創造）",,"設計工学",,"Vol. 40","No. 11","pp. 568-573",2005,Nov.
"斉藤卓志,佐藤勲,川口達也","フォトクロミックダイを利用した選択レーザー加熱手法の検討","日本機械学会熱工学コンファレンス2005","日本機械学会熱工学コンファレンス2005講演論文集",,,,"pp. 461-462",2005,Nov.
"斉藤卓志,田尻篤史,伊藤浩志,安原鋭幸,佐藤勲,川口達也","接触界面温度測定による樹脂熱物性推定手法の提案","成形加工シンポジア'05","成形加工シンポジア'05予稿集",,,,"pp. 273-276",2005,Nov.
"伊東宏,佐藤勲,斉藤卓志,焼本和利","ディスプレイ部材・micro-TASチップなど表面に微細パターンを有するプラスチック製品創成のための溶融微細転写法の開発","日本機械学会熱工学コンファレンス2005","日本機械学会熱工学コンファレンス2005講演論文集",,,,"pp. 459-460",2005,Nov.
"Takushi Saito,Atsushi Takata,Isao Satoh,Tatsuya Kawaguchi","Visualization of Micro-scale Transcription during Hot Embossing Lithography Process","Asian Workshop on Polymer Processing 2005","CD-ROM Proceedings of Asian Workshop on Polymer Processing 2005",,,,"pp. 50.pdf",2005,Oct.
"Takushi Saito,Isao Satoh","Thermal Strategy for the Separation of a Polymer Mixture",,"Polymer Engineering and Science",,"Vol. 45","No. 10","pp. 1419-1425",2005,Oct.
"伊藤浩志,風間邦彦,斉藤卓志,安原鋭幸,鞠谷雄士","マイクロ薄肉射出成形における転写性と高次構造・物性評価","第54回高分子討論会","第54回高分子討論会予稿集",,"Vol. 54","No. 2","pp. 5398-5399",2005,Sept.
"Tatsuya Kawaguchi,Isao Satoh,Takushi Saito","Surface Temperature Monitoring for the Cylindrical Melting Polymer Surface by Interferometric Computed Tomography","4th World Congress on Industrial Process Tomography","Proceedings of 4th World Congress on Industrial Process Tomography",,,,"pp. 118-123",2005,Sept.
"斉藤卓志,佐藤勲,川口達也","タルク添加されたプロプロピレン製射出成形品におけるフローマーク発現機構の研究","第54回高分子討論会","第54回高分子討論会予稿集",,"Vol. 54","No. 2","pp. 5400-5401",2005,Sept.
"岡田祐一,佐藤勲,齊藤卓志,川口達也","赤外線パルスレーザー加熱による材料表面微細加工状況の実時間観察","第33回可視化情報シンポジウム","第33回可視化情報シンポジウム予稿集",,,,"pp. 357-358",2005,July
"佐藤勲,斉藤卓志","伝熱工学から見たプラスチック射出成形金型の能動的温度制御技術",,"型技術",,"Vol. 20","No. 7","pp. 14-18",2005,July
"矢野友秀,川口達也,佐藤勲,齊藤卓志","干渉CT法による円筒表面近傍の三次元温度分布測定","第33回可視化情報シンポジウム","第33回可視化情報シンポジウム予稿集",,,,"pp. 373-374",2005,July
"宮部実,斉藤卓志,佐藤勲,川口達也","フォトクロミックダイ添加による吸収係数制御を用いた透明材料のレーザー接合手法","成形加工'05","成形加工'05予稿集",,,,"pp. 291-292",2005,June
"伊藤浩志,羽田孔明,風間邦彦,安原鋭幸,斉藤卓志,鞠谷雄士","マイクロスケール構造体を有する薄肉成形品の成形性と高次構造","成形加工'05","成形加工'05予稿集",,,,"pp. 79-80",2005,June
"高田淳史,佐藤勲,斉藤卓志,川口達也,焼本数利,伊東宏","ホットエンボス加工における微細形状転写機構の微視的検討","成形加工'05","成形加工'05予稿集",,,,"pp. 83-84",2005,June
"相原広志,安原鋭幸,伊藤浩志,斉藤卓志,榎本和城,大竹尚登","樹脂基カーボンナノファイバー複合材料薄板の射出成形とその特性評価","成形加工'05","成形加工'05予稿集",,,,"pp. 95-96",2005,June
"井手慎之介,斉藤卓志,伊藤浩志,安原鋭幸,佐藤勲,川口達也","薄肉射出成形品における対向ウェルド強度に関する研究","成形加工'05","成形加工'05予稿集",,,,"pp. 81-82",2005,June
"伊藤浩志,安原鋭幸,斉藤卓志,鞠谷雄士,山極佳年","マイクロポリマープロセスの成形性と構造物性に関する基礎研究","成形加工'05","成形加工'05予稿集",,,,"pp. 437-438",2005,June