@book{CTT100403512,
  author = {堀江三喜男},
  title = {日本機械学会 機械工学便覧　β(基礎)８編「機械要素」(分担)},
  publisher = {丸善},
  year = 2005,
}

@book{CTT100403511,
  author = {堀江三喜男},
  title = {日本ロボット学会　新版　ロボット工学ハンドブック  ３．力学基礎(分担)},
  publisher = {コロナ社},
  year = 2005,
}

@book{CTT100423658,
  author = {堀江三喜男},
  title = {工学設計－体系的アプローチ(共訳)},
  publisher = {培風館},
  year = 1995,
}

@book{CTT100487817,
  author = {Mikio HORIE and Shuuhei KUBO and Daiki KAMIYA},
  title = {3-DOF Planar Positioning-Orientation Mechanisms with Links and Large-Deflective Hinges},
  publisher = {ROMANSY 14-THEORY AND PRACTICE OF ROBOTS AND MANIPULATORS,ISBN 3-211-83691-8,Springer-Verlag Wien New York},
  year = 2003,
}

@book{CTT100487815,
  author = {Mikio HORIE and Tomoyuki ISHIBASHI and Daiki KAMIYA},
  title = {A Trial Manufacturing of Micromechanism Elements by Use of a Fast Atom Beam Etching Machine},
  publisher = {Micro System Technologies 2003 (International Conference & Exhibition on Micro Electro, Opto, Mechanical Systems and Components),Herbert Reichl(Editor),2003 Franzis Verlag GmbH, 85586 Point, ISBN 3-7723-7020-9},
  year = 2003,
}

@book{CTT100493372,
  author = {堀江三喜男 and 神谷 大揮},
  title = {外骨格マイクロモーションシステムのためのヒンジ形状に関する研究},
  publisher = {平成13年度～平成14年度科学研究費補助金(基盤研究(B)(2))研究成果報告書},
  year = 2003,
}

@book{CTT100473549,
  author = {Mikio Horie and Toru Uchida and Daiki Kamiya},
  title = {A Pantograph Mechanism with Large-deflective Hinges for Miniature Surface Mount Systems},
  publisher = {ROMANSY 13-THEORY AND PRACTICE OF ROBOTS AND MANIPULATORS, ISBN 3-211-83333-1,Springer-Verlag Wien New York},
  year = 2002,
}

@article{CTT100403502,
  author = {Yuki Ishii and Thomas Thuemmel and Mikio Horie},
  title = {Dynamic characteristic of miniature molding pantograph mechanims for surface mount systems},
  journal = {Journal of Microsystem Techonologies},
  year = 2005,
}

@article{CTT100403501,
  author = {Daiki Kamiya and Taketo Gozu and Mikio Horie},
  title = {Design and manufacturing of micromechanism elements of 2-DOF micromanipulator},
  journal = {Journal of Microsystem Techonologies},
  year = 2005,
}

@article{CTT100403500,
  author = {Daiki Kamiya and Mikio Horie},
  title = {Study of electrically-induced wetting on silicon single-crystal substrates},
  journal = {Contact Angle, Wettability and Adhesion, K. L. Mittal (Ed.), VSP, Utrecht},
  year = 2005,
}

@article{CTT100387582,
  author = {Mikio HORIE and Teru HAYASHI and et al.},
  title = {Micromechanisms and their applications},
  journal = {Journal of Robotics and Mechatronics},
  year = 2003,
}

@article{CTT100387603,
  author = {Mikio HORIE and Masaru TOMOMATSU and Daiki KAMIYA},
  title = {DURABILITY OF LARGE-DEFLECTIVE HINGES IN MOLDED PANTOGRAPH MECHANISMS WITH HINGES AND LINKS},
  journal = {Proceeding of the 5th International Conference on Electronics Materials and Packaging-EMAP2003},
  year = 2003,
}

@article{CTT100493376,
  author = {堀江三喜男},
  title = {部門功績賞受賞にあたって},
  journal = {日本機械学会機素潤滑設計部門-ニューズレター},
  year = 2003,
}

@article{CTT100493375,
  author = {堀江三喜男},
  title = {マイクロ/ナノシステム(運動メカニズムを中心として)の動向},
  journal = {2003年度精密工学会秋季大会シンポジウム資料},
  year = 2003,
}

@article{CTT100493374,
  author = {Mikio HORIE},
  title = {Durability of Large-Deflective Hinges in Molded Pantograph Mechanisms with Hinges and Links},
  journal = {Proceeding of the 6th International Workshop of the Department of Mechanical Science and Engineering},
  year = 2003,
}

@article{CTT100493373,
  author = {堀江三喜男 and 柳澤　喜行 and 神谷　大揮},
  title = {マルチ並列配置形高密度表面実装システムの試作研究},
  journal = {平成13年度～平成14年度科学研究費補助金( 基盤研究(B)(2))研究成果報告書},
  year = 2003,
}

@article{CTT100493371,
  author = {添田　照夫 and 神谷　大揮 and 堀江三喜男},
  title = {高速原子線(FAB)加工装置用マスクの提案とそのマスクを用いたエッチング加工},
  journal = {日本機械学会年次大会講演論文集V},
  year = 2003,
}

@article{CTT100493553,
  author = {冨松　将 and 神谷　大揮 and 堀江三喜男},
  title = {小形表面実装システム用パンタグラフ機構のヒンジ寿命},
  journal = {日本機械学会年次大会講演論文集IV},
  year = 2003,
}

@article{CTT100493552,
  author = {堀江三喜男 and 冨松　将 and 神谷　大揮 and 杉原　輝哉},
  title = {ヒンジとリンクの一体化射出成形パンタグラフ機構におけるヒンジの耐疲労性},
  journal = {日本IFToMM会議シンポジウム前刷集(第９回)},
  year = 2003,
}

@article{CTT100493551,
  author = {堀江三喜男},
  title = {マイクロ/ナノシステム},
  journal = {2003年度精密工学会春季大会講演論文集},
  year = 2003,
}

@article{CTT100493550,
  author = {石井 佑樹 and チュムメル　トーマス and 堀江三喜男 and 中村真人},
  title = {大変形ヒンジとリンクからなる２自由度パンタグラフ機構の静・動特性},
  journal = {日本機械学会第３回機素潤滑設計部門講演会講演論文集},
  year = 2003,
}

@article{CTT100493549,
  author = {Yuki ISHII and Mikio HORIE},
  title = {Dynamic Characteristics of Miniature Molding Pantograph Mechanisms for Surface Mount Systems},
  journal = {Proceeding of the 2003 JSME-IIP/ASME-ISPS Joint Conference on Micromechatronics for Information and Precision Equipment-IIP/ISPS Joint MIPE’03},
  year = 2003,
}

@article{CTT100493548,
  author = {Daiki KAMIYA and Taketo GOZU and Mikio HORIE},
  title = {Design and Manufacturing of Micro Mechanism Elements of 2-DOF Micromanipulator},
  journal = {Proceeding of the 2003 JSME-IIP/ASME-ISPS Joint Conference on Micromechatronics for Information and Precision Equipment-IIP/ISPS Joint MIPE’03},
  year = 2003,
}

@article{CTT100487816,
  author = {Mikio HORIE and Shinnosuke TORII and Daiki KAMIYA},
  title = {Micro-Hinges changed Flexural Rigidity Intermittently for Micromechanism Joints},
  journal = {Journal of Microsystem Technologies},
  year = 2003,
}

@article{CTT100493547,
  author = {Daiki KAMIYA and Mikio HORIE},
  title = {Electrowetting on Silicon Single-Crystal Substrates},
  journal = {Contact Angle, Wettability and Adhesion},
  year = 2002,
}

@article{CTT100493546,
  author = {Mikio HORIE},
  title = {Flexural Hinge, Large-Deflective Elastic Hinge, Large-Deflective Hinge and Their Applications for Micromechanisms},
  journal = {Proceeding of the Scientific Seminar, Terminology of the Mechanisms and Machines Science-20th Working Meeting of IFToMM Commission A for Standardization of Terminology},
  year = 2002,
}

@article{CTT100493545,
  author = {神谷　大揮 and 蒲生　吉洋 and 芝田　稔 and 堀江三喜男},
  title = {ディップコーティング法による形状記憶樹脂製マイクロチューブの試作},
  journal = {2002年度精密工学会東北支部学術講演会講演論文集},
  year = 2002,
}

@article{CTT100493544,
  author = {芝田　稔 and 神谷　大揮 and 堀江三喜男 and 石山　修},
  title = {液体中超音波場での樹脂の加熱効率},
  journal = {2002年度精密工学会東北支部学術講演会講演論文集},
  year = 2002,
}

@article{CTT100742121,
  author = {Seungchol Choi and Mikio Horie},
  title = {Computer simulations suggest for the vibration-type MEMS-viscosity sensor with spiral beams},
  journal = {Journal of Seoul International Conference on Engineering and Applied Sciences},
  year = 2017,
}

@article{CTT100760855,
  author = {MIKIO HORIE},
  title = {Study on Polymer-made 3DOF Spatial Parallel Manipulator},
  journal = {},
  year = 2017,
}

@article{CTT100735904,
  author = {MIKIO HORIE},
  title = {Study on Polymer-made 3DOF Spatial Parallel Manipulator},
  journal = {Microactuators and Micromechanisms, Series Title - Mechanisms and Machine Science},
  year = 2016,
}

@article{CTT100690815,
  author = {Xin Li and Mikio Horie and Toshiharu Kagawa},
  title = {Pressure-Distribution Methods for Estimating Lifting Force of Swirl Gripper},
  journal = {IEEE/ASME TRANSACTIONS ON MECHATRONICS},
  year = 2014,
}

@article{CTT100690816,
  author = {Xin Li and Yoshihiro Nakamura and Mikio Horie and Toshiharu Kagawa},
  title = {An Experimental Investigation on the Flotation Transport of a Glass Substrate Using Vortex Bearing Elements},
  journal = {Journal of Flow Control, Measurement & Visualization},
  year = 2013,
}

@article{CTT100645145,
  author = {Xin Li and MIKIO HORIE and TOSHIHARU KAGAWA},
  title = {Study on the basic characteristics of a vortex bearing element},
  journal = {International Journal of Advanced Manufacturing Technology},
  year = 2013,
}

@article{CTT100593745,
  author = {Seid Hossein Sadat and DAIKI KAMIYA and MIKIO HORIE},
  title = {Large Deflection Spiral Shaped Micromirror Actuator},
  journal = {Journal of Microelectromechanical Systems},
  year = 2009,
}

@article{CTT100570346,
  author = {Seid Hossein Sadat and DAIKI KAMIYA and Saeed  BAGHERI and MIKIO HORIE},
  title = {2 Degree-of-Freedom Spiral Micromirror Manipulator (Fabrication and Spatial Mechanical Assembling)},
  journal = {Journal of Advanced Mechanical Design, Systems, and Manufacturing (JSME)},
  year = 2008,
}

@article{CTT100570345,
  author = {SeungChol CHOI and MIKIO HORIE and Yasuhisa Ando},
  title = {Surface Force related with Attachment and Detachment of Dust due to Locomotion of Cantilever in the Air Condition},
  journal = {Journal of Advanced Mechanical Design, Systems, and Manufacturing(JSME)},
  year = 2008,
}

@article{CTT100570347,
  author = {SeungChol CHOI and MIKIO HORIE and Yasuhisa Ando},
  title = {Cleaning of Dust between Interactive Contact Surfaces by Applied Normal Load of Artificial Stainless-Cantilever in AFM},
  journal = {Journal of Advanced Mechanical Design, Systems, and Manufacturing(JSME)},
  year = 2007,
}

@article{CTT100508077,
  author = {Daiki Kamiya and Mikio Horie},
  title = {Study of electrically-induced wetting on silicon single-crystal substrates},
  journal = {Contact angle, wettability and adhesion},
  year = 2006,
}

@article{CTT100507682,
  author = {Mikio Horie and Yidai Okabe and Masahiro Yamamoto and Daiki Kamiya},
  title = {Durability of large-deflective hinges made of blend polypropylene used for molded pantograph mechanisms},
  journal = {ROMANSY 16-Robot Design, Dynamics, and Control},
  year = 2006,
}

@article{CTT100403408,
  author = {M. Nakamura and A. Kobayashi and F. Takagi and A. Watanabe and Y. Hiruma and K. Ohuchi and Y. Iwasaki and M. Horie and I. Morita and S. Takatani},
  title = {Biocompatible inkjet printing technique for designed seeding of individual living cells},
  journal = {TISSUE ENGINEERING},
  year = 2005,
}

@article{CTT100476788,
  author = {Thomas THUEMMEL and Mikio HORIE and Yuki ISHII},
  title = {VDI-BERICHTE},
  journal = {Dynamikanalyse eines Miniatur-Pantograph-Mechanismus mit elastischen Gelenken und Gliedern},
  year = 2002,
}

@article{CTT100473561,
  author = {Mikio HORIE and Shuuhei KUBO and Daiki KAMIYA},
  title = {Characteristics of the 3-DOF Planar Positioning-Orientation Mechanisms with Links and Large-Deflective Hinges},
  journal = {The 6th International Conference on Mechatronics Technology(ICMT2002)},
  year = 2002,
}

@article{CTT100473560,
  author = {Mikio HORIE and Taketo GOZU and Daiki KAMIYA},
  title = {Design and Manufacturing of Actuating Beams with Mirror and Electrodes with Mirror Support Pyramid on Substrate for Optical Switches},
  journal = {Proceedings of SPIE, Optomechatronic Systems III},
  year = 2002,
}

@article{CTT100473559,
  author = {Mikio HORIE and Shuuhei KUBO and Daiki KAMIYA},
  title = {3-DOF Planar Positioning-Orientation Mechanisms with Links and Large-Deflective Hinges},
  journal = {Book of Abstracts, 14th CISM-IFToMM Symposium , ROMANSY 14, Theory and Practice of Robots and Manipulators},
  year = 2002,
}

@article{CTT100473558,
  author = {堀江三喜男},
  title = {「マイクロメカニズム」(マイクロ／ナノシステムとその製作技術)},
  journal = {2002年度精密工学会秋季大会シンポジウム資料},
  year = 2002,
}

@article{CTT100473557,
  author = {堀江三喜男},
  title = {マイクロシステム(マイクロマシン,MEMS/MOEMS)とその応用},
  journal = {日本機械学会,機素潤滑設計部門，第２回機素潤滑設計部門講演会講演論文集},
  year = 2002,
}

@article{CTT100473556,
  author = {堀江三喜男},
  title = {世界に輝く精密工学会研究専門委員会・分科会を目指して},
  journal = {精密工学会誌},
  year = 2002,
}

@article{CTT100473555,
  author = {堀江三喜男},
  title = {マイクロモーションシステムとその応用},
  journal = {日本材料科学会,材料の科学と工学},
  year = 2002,
}

@article{CTT100473554,
  author = {堀江三喜男},
  title = {マイクロシステム(マイクロマシン,MEMS/MOEMS)とその応用},
  journal = {(社)日本フルードパワーシステム学会},
  year = 2002,
}

@article{CTT100473553,
  author = {神谷　大揮 and 鈴木哲治 and 堀江三喜男},
  title = {人の摘み動作における母指と示指の相対運動},
  journal = {日本機械学会2002年度年次大会講演論文集},
  year = 2002,
}

@article{CTT100473552,
  author = {堀江三喜男 and 神谷大揮 and 大原　聡},
  title = {ナノ力覚を有するマイクロハンドに関する基礎的研究},
  journal = {日本機械学会2002年度年次大会講演論文集},
  year = 2002,
}

@article{CTT100473551,
  author = {添田照夫 and 神谷大揮 and 堀江三喜男},
  title = {微小構造体作製のための傾斜マスクによる高速原子線加工線幅の微小化},
  journal = {日本機械学会2002年度年次大会講演論文集},
  year = 2002,
}

@article{CTT100473550,
  author = {神谷大揮 and 堀江三喜男},
  title = {２自由度マイクロ光スイッチの変位解析},
  journal = {日本機械学会, 機素潤滑設計部門，第２回機素潤滑設計部門講演会講演論文集},
  year = 2002,
}

@article{CTT100466651,
  author = {添田照夫 and 神谷大揮 and 堀江三喜男},
  title = {高速原子線加工用ナノマスク},
  journal = {日本機械学会　IIP情報・知能・精密機器部門講演会講演論文集},
  year = 2002,
}

@article{CTT100466650,
  author = {大原　聡 and 神谷　大揮 and 堀江 三喜男},
  title = {ナノ力覚マイクロハンドの研究},
  journal = {2002年度精密工学会春季大会学術講演会講演論文集},
  year = 2002,
}

@article{CTT100453911,
  author = {廣岡　高明 and 神谷　大揮 and 堀江　三喜男},
  title = {マイクロロボット用外骨格モジュールに関する研究},
  journal = {日本機械学会2001年度年次大会講演論文集},
  year = 2001,
}

@article{CTT100452448,
  author = {Mikio Horie and Daiki Kamiya and Toru Uchida and Masahiro Urata and Kozo Ikegami},
  title = {New Pantograph Mechanisms with Large-Deflective Hinges for Palmtop Surface Mount System},
  journal = {Proceedings of IPACK'01 ( The Pacific RIM/ASME International Electronic Packaging Technical Conference and Exhibition )},
  year = 2001,
}

@article{CTT100452450,
  author = {堀江三喜男},
  title = {高分子製ヒンジの繰り返し曲げと「超」寿命化},
  journal = {日本機械学会2001年度年次大会講演論文集},
  year = 2001,
}

@article{CTT100452451,
  author = {石井　佑樹 and 堀江三喜男},
  title = {大変形ヒンジとリンクの一体化パンタグラフ機構の動的解析},
  journal = {日本機械学会2001年度年次大会講演論文集},
  year = 2001,
}

@article{CTT100452452,
  author = {石橋　知之 and 神谷　大揮 and 堀江　三喜男},
  title = {高速原子線加工装置を用いたマイクロ機構要素の試作},
  journal = {日本機械学会2001年度年次大会講演論文集},
  year = 2001,
}

@article{CTT100453905,
  author = {神津　岳人 and 神谷大揮 and 堀江三喜男},
  title = {マルチ入出力光スイッチ用大角変位２自由度マイクロミラー},
  journal = {日本機械学会関東支部第７期総会講演会講演論文集},
  year = 2001,
}

@article{CTT100453906,
  author = {蒲生吉洋 and 神谷大揮 and 堀江三喜男},
  title = {形状記憶樹脂製膨膜形マイクロマニピュレータに関する研究},
  journal = {日本機械学会関東支部第７期総会講演会講演論文集},
  year = 2001,
}

@article{CTT100453907,
  author = {堀江　三喜男 and 鳥居　信之介 and 神谷　大揮},
  title = {先端が円弧軌跡を有するマイクロメカニズム用ヒンジの開発},
  journal = {日本機械学会IIP情報・知能・精密機器部門講演会},
  year = 2001,
}

@article{CTT100453908,
  author = {堀江三喜男},
  title = {マイクロメカニズムの設計技術とその応用},
  journal = {2001年度精密工学会春季大会講演論文集},
  year = 2001,
}

@article{CTT100453909,
  author = {Mikio HORIE and Shinnosuke TORII and Daiki KAMIYA},
  title = {Micro-Hinges changed Flexural Rigidity Intermittently for Micromechanism Joints},
  journal = {Fourth International Workshop on High-Aspect-Ratio Micro-Structure Technology (HARMST'01)},
  year = 2001,
}

@article{CTT100453910,
  author = {久保　周作 and 神谷　大揮 and 堀江　三喜男},
  title = {大変形ヒンジとリンクの一体化３自由度位置姿勢決めテーブル},
  journal = {日本機械学会2001年度年次大会講演論文集},
  year = 2001,
}

@article{CTT100453912,
  author = {Mikio HORIE and Yuki ISHII and Daiki KAMIYA},
  title = {A Dynamic Analysis of Molding Pantograph Mechanism with Large-Deflective Hinges and Links},
  journal = {Proceeding of 3rd IFToMM International Micromechanism Symposium},
  year = 2001,
}

@article{CTT100453913,
  author = {Mikio HORIE and Takeo GOZU and Daiki KAMIYA and Kunio KOYABU and Fumikazu OOHIRA},
  title = {Development of Micromirror Mechanisms for Multi Optical Switches},
  journal = {2001 IEEE/LEOS International Conference on Optical MEMS 2001},
  year = 2001,
}

@article{CTT100453914,
  author = {Mikio HORIE and Shuusaku  KUBO and Daiki KAMIYA},
  title = {Molding 3-DOF Planar Positioning and Orientation Tables with Large-Deflective Polymer Hinges and Links for Packaging Manufacturing Systems},
  journal = {Proceeding of EMAP2001(Electronic Materials and Packaging 2001)},
  year = 2001,
}

@article{CTT100453915,
  author = {Mikio HORIE and Yuki ISHII and Daiki KAMIYA},
  title = {A  Dynamic  Characteristics  of  Miniature Molding Pantagraph  Mechanisms  with Large-Deflective  Hinges  and  Links  for Micro  Assembly Systems},
  journal = {The First Taiwan-Japan Workshop on Mechanical and Aerospace Engineering, National Cheng Kung University, Tainan, Taiwan, R.O.C.},
  year = 2001,
}

@article{CTT100452449,
  author = {Mikio HORIE and Toru UCHIDA and Daiki KAMIYA},
  title = {Palmtop Pantograph Mechanism with Large-Deflective Hinges for Miniature Surface Mount Systems},
  journal = {Initiatives of Precision Engineering at the Beginning of a Millennium(10th. International Conference on Precision Engineering(ICPE)),KLUWER ACADEMIC PUBLISHERS},
  year = 2001,
}

@article{CTT100441321,
  author = {Mikio HORIE and Toru UCHIDA and Daiki KAMIYA},
  title = {Development of  a Pantograph Mechanism with Large-deflective Hinges  for Miniature Surface Mount Systems},
  journal = {Proceeding of Design, Test, Integration, and Packaging (DTIP ) of MEMS/MOEMS},
  year = 2000,
}

@article{CTT100441331,
  author = {堀江三喜男 and 浦田　昌裕 and 杉原　輝哉},
  title = {小形表面実装システム用パンタグラフ機構の出力節姿勢一定化の研究},
  journal = {2000年度精密工学会秋季大会講演論文集},
  year = 2000,
}

@article{CTT100441330,
  author = {Daiki KAMIYA and Mikio HORIE},
  title = {Electrowetting on Single-Crystal Substrates of Silicon},
  journal = {Book of Abstracts(Second International Symposium on Contact Angle Wettability and Adhesion)},
  year = 2000,
}

@article{CTT100441329,
  author = {金　金光 and 堀江三喜男},
  title = {高密度HDDのための浮上量検出用マイクロ静電容量センサ},
  journal = {日本機械学会2000年度年次大会講演論文集},
  year = 2000,
}

@article{CTT100441328,
  author = {神谷大揮 and 高橋浩一 and 堀江三喜男},
  title = {把持作業時におけるヒトの手の動作と把持力},
  journal = {日本機械学会2000年度年次大会講演論文集},
  year = 2000,
}

@article{CTT100441327,
  author = {高橋浩一 and 神谷大揮 and 堀江三喜男},
  title = {二本指把持姿勢における指への作用力に対するヒトの感度測定},
  journal = {日本機械学会2000年度年次大会講演論文集},
  year = 2000,
}

@article{CTT100441326,
  author = {鳥居信之介 and 神谷大揮 and 堀江三喜男},
  title = {マイクロメカニズムのための剛性を変化させたマイクロヒンジの変位特性},
  journal = {日本機械学会2000年度年次大会講演論文集},
  year = 2000,
}

@article{CTT100441319,
  author = {金　金光 and 堀江三喜男},
  title = {LIGAプロセス製大変位マイクロXYステージ},
  journal = {日本機械学会東海支部講演論文集( 第４９期支部総会講演会)},
  year = 2000,
}

@article{CTT100441325,
  author = {Mikio HORIE and Daiki KAMIYA},
  title = {A Pantograph Mechanism with Large-deflective Hinges for Miniature Surface Mount Systems},
  journal = {Book of Abstracts(Thirteenth CISM-IFToMM　Symposium on the Theory and Practice of Robots and Manipulators)},
  year = 2000,
}

@article{CTT100441320,
  author = {堀江三喜男},
  title = {マイクロメカニズム設計技術と材料特性},
  journal = {日本機械学会・材料力学部門・分科会/研究会合同シンポジウム（研究の最前線；21世紀に向けて）講演論文集},
  year = 2000,
}

@article{CTT100441322,
  author = {堀江三喜男},
  title = {機構制御の最先端と情報・医療福祉機器への応用},
  journal = {日本機械学会，情報・知能・精密機器部門/講習会資料},
  year = 2000,
}

@article{CTT100441332,
  author = {神谷　大揮 and 堀江三喜男},
  title = {シリコン基板表面のぬれの変化とマイクロマシンへの応用 },
  journal = {日本IFToMM会議シンポジウム前刷集(第６回) },
  year = 2000,
}

@article{CTT100438508,
  author = {Mikio HORIE and Shinnosuke TORII and Daiki KAMIYA},
  title = {Displacement Characteristics of Micro-Hinges with Suitable Flexural Rigidity for Micromechanisms},
  journal = {Proc. of Sixth International Conference on Control, Automation, Robotics and Vision (ICARCV2000)},
  year = 2000,
}

@article{CTT100438507,
  author = {Mikio HORIE and Daiki KAMIYA and Masahiro URATA and Kozo IKEGAMI},
  title = {New Miniature Pantograph Mechanisms with Large-Deflective Hinges for Micro-Bonding by Adhesives},
  journal = {Proc. of International Symposium on Electronic Materials and Packaging ( EMAP2000 )},
  year = 2000,
}

@article{CTT100438506,
  author = {堀江　三喜男 and 内田　亨 and 神谷　大揮},
  title = {小形実装システムのための大変形ヒンジからなるパンタグラフ機構},
  journal = {日本機械学会論文集C編},
  year = 2000,
}

@article{CTT100441324,
  author = {堀江三喜男 and 柳澤　喜行 and 神谷　大揮},
  title = {極微機械要素高密度実装システムの研究開発},
  journal = {平成10年度～平成11年度科学研究費補助金(基盤研究(B)(2))研究成果報告書},
  year = 2000,
}

@article{CTT100441323,
  author = {堀江三喜男 and 神谷　大揮},
  title = {三次元高集積マイクロ運動変換機構の研究},
  journal = {平成10年度～平成11年度科学研究費補助金(基盤研究(C)(2))研究成果報告書},
  year = 2000,
}

@article{CTT100423656,
  author = {堀江三喜男},
  title = {平成10年度マイクロマシンの基礎技術の研究},
  journal = {財団法人マイクロマシンセンター},
  year = 1999,
}

@article{CTT100423651,
  author = {堀江　三喜男 and 内田　亨 and 神谷　大揮},
  title = {大変形ヒンジの変位特性と表面実装システム用マルチ並列配置パンタグラフ機構への応用},
  journal = {1999年度精密工学会秋季大会学術講演会講演論文集},
  year = 1999,
}

@article{CTT100423646,
  author = {神谷　大揮 and 堀江三喜男},
  title = {シリコン基板表面の親疎水現象とマイクロマシンへの応用に関する研究},
  journal = {1999年度精密工学会春季大会学術講演会講演論文集},
  year = 1999,
}

@article{CTT100423657,
  author = {堀江三喜男},
  title = {並列マルチメカニズムからなる小形実装システム},
  journal = {日本機械学会講習会教材「21世紀の小形/携帯機器はこうして創られる(表面実装システムの現状と将来)」},
  year = 1999,
}

@article{CTT100423644,
  author = {金　金光 and 堀江三喜男},
  title = {大変形弾性ヒンジからなる平行ばね機構の特性解析},
  journal = {1999年度精密工学会春季大会学術講演会講演論文集},
  year = 1999,
}

@article{CTT100423645,
  author = {金　金光 and 堀江三喜男},
  title = {大変形弾性ヒンジからなる平行ばね機構の特性解析},
  journal = {1999年度精密工学会春季大会学術講演会講演論文集},
  year = 1999,
}

@article{CTT100423643,
  author = {Daiki KAMIYA and Takuji HAYAMA and Mikio HORIE},
  title = {Electrostatic Comb-drive Actuators made of Polyimide for Actuating Micromotion Convert Mechanisms},
  journal = {J. of Microsystem Technologies},
  year = 1999,
}

@article{CTT100423654,
  author = {Mikio HORIE and Toru UCHIDA and Daiki KAMIYA and Teruya SUGIHARA},
  title = {A New Surface Mount System for Micro Devices},
  journal = {Proceeding of the 3rd France-Japan Workshop ( N2M'99 ( From Nano to Macroscale science and technology through Microsystems )},
  year = 1999,
}

@article{CTT100423655,
  author = {堀江三喜男},
  title = {平成10年度マイクロマシン技術の標準化に関する調査研究報告書},
  journal = {日本機械工業連合会・マイクロマシンセンター},
  year = 1999,
}

@article{CTT100423647,
  author = {神谷　大揮 and 坂本　宣幸 and 堀江　三喜男},
  title = {形状記憶樹脂を用いた小形機械システム},
  journal = {日本機械学会1999年度年次大会講演論文集},
  year = 1999,
}

@article{CTT100423653,
  author = {Daiki KAMIYA and Mikio HORIE},
  title = {Hydrophilic and Hydrophobic Phenomema on Sillicon Substrate for MEMS},
  journal = {Proceedings of SPIE ( Design, Characterization, and Packaging for MEMS and Microelectronics )},
  year = 1999,
}

@article{CTT100423648,
  author = {堀江　三喜男 and 内田　亨 and 神谷　大揮},
  title = {小形実装システムのための大変形ヒンジからなるパンタグラフ機構},
  journal = {日本機械学会1999年度年次大会講演論文集},
  year = 1999,
}

@article{CTT100423649,
  author = {Kwang KIM and Mikio HORIE},
  title = {LIGA Fabricated serially arranged Electrostatic Comb-Drives for XY-Stage},
  journal = {Proceeding of Third International Workshop on High Aspect Ratio Micro System Technology(HARMST'99)},
  year = 1999,
}

@article{CTT100423641,
  author = {Mikio HORIE and Daiki KAMIYA and Takuji HAYAMA and Kozo IKEGAMI},
  title = {Development of Three-Dimensional Motion Convert Micromachines with Large Deflective Elastic Hinges based on Bulk and Surface Micromachining  Techniques},
  journal = {Advances in Information Storage Systems},
  year = 1999,
}

@article{CTT100423642,
  author = {金　金光 and 堀江三喜男},
  title = {大変形弾性ヒンジからなる平面リンク機構の変位解析（自己平衡収束法の提案とその平行ばね機構への応用）},
  journal = {日本機械学会論文集Ｃ編},
  year = 1999,
}

@article{CTT100423650,
  author = {Kwang KIM and Mikio HORIE},
  title = {Displacement Analysis of Micro Parallel Spring Mechanisms with Large-Deflective Elastic Hinges},
  journal = {Proceeding of 1999 International Conference on Advanced Manufacturing  Technology  (ICAMT'99)},
  year = 1999,
}

@article{CTT100423652,
  author = {Mikio HORIE and Hiroaki FUNABASHI},
  title = {A New 4-leg Planar Parallel Manipulator for Micro Positioning  Table},
  journal = {Proceedings of Tenth World Congress on the Theory of Machine and Mechanisms (IFToMM),},
  year = 1999,
}

@article{CTT100486323,
  author = {MIKIO HORIE},
  title = {位置決め機構用大変形弾性ヒンジの特性解析},
  journal = {日本機械学会論文集C編},
  year = 1998,
}

@article{CTT100486322,
  author = {堀江三喜男 and 片岡　幹彦 and 舟橋　宏明 and 池上　皓三},
  title = {3自由度平面パラレルマニピュレータの対偶すきまによる出量誤差分布の遷移},
  journal = {日本機械学会論文集C編},
  year = 1998,
}

@article{CTT100473591,
  author = {Mikio HORIE and Takashi NOZAKI and Kozo IKEGAMI and Futoshi KOBAYASHI},
  title = {Design System of Superelastic Hinges and Its Application to Micromanipulators},
  journal = {JSME International Journal},
  year = 1997,
}

@article{CTT100486319,
  author = {MIKIO HORIE},
  title = {超弾性ヒンジからなるパンタグラフ機構の特性解析},
  journal = {日本機械学会論文集(C編)},
  year = 1996,
}

@article{CTT100486320,
  author = {MIKIO HORIE},
  title = {Development of Mechanical Systems for Micro-bonding by Adhesive(Proposal of Micro-application Technology of Adhesive Resin)},
  journal = {JSME International Journal, Ser. C},
  year = 1996,
}

@article{CTT100486321,
  author = {MIKIO HORIE},
  title = {New Micromachine Elements Super-Elastic Hinges and its Application to three-Dimensional Micromechanisms},
  journal = {Proc. of International Conference of Machine Design and Development},
  year = 1996,
}

@article{CTT100473625,
  author = {MIKIO HORIE},
  title = {Development of Pantograph Mechanisms with Super Elastic Hinges for Micro-Bonding by Adhesives},
  journal = {Proc. of the 9th IFToMM World Congress},
  year = 1995,
}

@article{CTT100486317,
  author = {MIKIO HORIE},
  title = {Synthesis of Spatial Mechanism with Consideration of Degree of Freedom of Mechanism},
  journal = {JSME International Journal},
  year = 1995,
}

@article{CTT100473588,
  author = {堀江三喜男 and 舟橋宏明 and 小澤剛志},
  title = {マイクロロボット用力覚センサの開発},
  journal = {日本機械学会論文集(C編)},
  year = 1995,
}

@article{CTT100473590,
  author = {堀江三喜男 and 小林　太 and 池上皓三 and 岡部信次},
  title = {マイクロ接着のための機械システムの開発(微少量接着剤の塗布方法の提案)},
  journal = {日本機械学会論文集(C編)},
  year = 1995,
}

@article{CTT100486318,
  author = {MIKIO HORIE},
  title = {超弾性ヒンジの設計システムとその微小マニピュレータへの応用},
  journal = {日本機械学会論文集(C編)},
  year = 1995,
}

@article{CTT100473624,
  author = {MIKIO HORIE},
  title = {Development of Mechanical System for Micro-Bonding by Adhesive},
  journal = {ASME 1994 International Mechanical Engineering Congress and Exposition},
  year = 1994,
}

@article{CTT100473623,
  author = {MIKIO HORIE},
  title = {A Study on Micro Force Sensors for Microbonding Systems},
  journal = {Micro System Technologies'94},
  year = 1994,
}

@article{CTT100473621,
  author = {MIKIO HORIE},
  title = {対偶すきまを考慮した平面パラレルマニピュレータの厳密出量誤差解析},
  journal = {日本機械学会機講論},
  year = 1994,
}

@article{CTT100473589,
  author = {Mikio HORIE and Kozo IKEGAMI and Futoshi KOBAYASHI},
  title = {DEVELOPMENT OF MECHANIAL SYSTEMS FOR MICRO-BONDING BY ADHESIVE: PROPOSAL OF MICRO APPLICATION TECHNOLOGY OF ADHESIVE RESIN},
  journal = {The American Society of MEchanical Engineers,AMD-Vol.195,Mechanics and Materials for Electronic Packaging},
  year = 1994,
}

@article{CTT100473622,
  author = {MIKIO HORIE},
  title = {超弾性ヒンジの設計システムとその微小マニピュレータへの応},
  journal = {日本機械学会機講論},
  year = 1994,
}

@article{CTT100473618,
  author = {MIKIO HORIE},
  title = {マイクロロボット用力覚センサの開発},
  journal = {日本機械学会機講論},
  year = 1993,
}

@article{CTT100473617,
  author = {堀江三喜男 and 舟橋宏明 and 片岡},
  title = {高集積化機構の設計システムに関する研究},
  journal = {日本機械学会機講論},
  year = 1993,
}

@article{CTT100473619,
  author = {MIKIO HORIE},
  title = {マイクロ接着のための機械システムの開発(微少量接着剤の塗布方法の提案)},
  journal = {日本機械学会機講論},
  year = 1993,
}

@article{CTT100473620,
  author = {MIKIO HORIE},
  title = {対偶すきまを考慮した平面パラレルマニピュレータの誤差解析},
  journal = {日本機械学会機講論},
  year = 1993,
}

@article{CTT100486316,
  author = {MIKIO HORIE},
  title = {機械の自由度を考慮した空間機構形式の総合},
  journal = {日本機械学会論文集(C編)},
  year = 1993,
}

@article{CTT100486315,
  author = {MIKIO HORIE},
  title = {最小層数を満足する平面8節機構の層配置形式に関する研究},
  journal = {日本機械学会論文集(C編)},
  year = 1993,
}

@article{CTT100473587,
  author = {Hiroaki FUNABASHI and Yukio TAKEDA and Takahiro YOSHINO and Mikio HORIE},
  title = {Networking and Information Distribution in Robots Composed of Identical Units},
  journal = {JSME International Journal},
  year = 1992,
}

@article{CTT100473615,
  author = {坂本吉弘 and 小川　潔 and 堀江三喜男},
  title = {機械の自由度を考慮した空間機構形式の総合},
  journal = {日本機械学会機講論},
  year = 1992,
}

@article{CTT100473614,
  author = {堀江三喜男 and 舟橋宏明 and 小澤剛志},
  title = {ロボットハンドメカニズム用力覚センサの開発},
  journal = {日本機械学会機講論},
  year = 1992,
}

@article{CTT100486308,
  author = {MIKIO HORIE},
  title = {外部構造の実験的同定に基づく機械運動系の制御(第1報,制御手法の提案)},
  journal = {日本機械学会論文集(C編)},
  year = 1992,
}

@article{CTT100473613,
  author = {堀江三喜男 and 舟橋宏明 and 林},
  title = {定性・定量化処理に基づく機械運動系の機構設計システムに関する研究},
  journal = {日本機械学会機講論},
  year = 1992,
}

@article{CTT100473616,
  author = {MIKIO HORIE},
  title = {最小層数を満足する平面8節機構の総合},
  journal = {日本機械学会機講論},
  year = 1992,
}

@article{CTT100486309,
  author = {Hiroaki FUNABASHI and Mikio HORIE and Tetsuya KUBOTA and Yukio TAKEDA},
  title = {Development of Spatial Parallel Manipulators with Six Degrees of Freedom},
  journal = {JSME International Journal, Ser. 3},
  year = 1991,
}

@article{CTT100486311,
  author = {MIKIO HORIE},
  title = {ユニット構成ロボットにおける制御系構成と情報管理},
  journal = {日本機械学会論文集(C編)},
  year = 1991,
}

@article{CTT100486310,
  author = {MIKIO HORIE},
  title = {A Synthesis of Robotic Pantograph Mechanisms based on Working Spaces and Static Characteristic Charts},
  journal = {JSME International Journal, Ser. 3},
  year = 1991,
}

@article{CTT100473611,
  author = {堀江三喜男 and 舟橋宏明 and 荒井　勝},
  title = {階層化意思決定法に基づく機構選定支援システムに関する研究(機構選定結果に及ぼす一対比較データの影響)},
  journal = {日本機械学会機講論},
  year = 1991,
}

@article{CTT100473612,
  author = {堀江三喜男 and 舟橋宏明 and 吉田麦生},
  title = {不等速運動機構における対偶作用力ベクトル計測用センサの開発},
  journal = {日本機械学会機講論},
  year = 1991,
}

@article{CTT100486313,
  author = {MIKIO HORIE},
  title = {動節の層配置を考慮した平面機構の動的解析},
  journal = {日本機械学会論文集(C編)},
  year = 1990,
}

@article{CTT100486312,
  author = {Yoshihiro SAKAMOTO and Hiroaki FUNABASHI and Mikio HORIE and Kiyoshi OGAWA},
  title = {A Synthesis of Planar Mechanisms with Pairs of Optimum Tolerances},
  journal = {JSME International Journal, Ser. III},
  year = 1990,
}

@article{CTT100486304,
  author = {MIKIO HORIE},
  title = {入出力運動形式を考慮した機構系の自動生成},
  journal = {日本機械学会論文集C編},
  year = 1990,
}

@article{CTT100473610,
  author = {堀江三喜男 and 舟橋宏明 and 荒井 勝},
  title = {階層化意思決定法に基づく機構選定支援システムに関する研究},
  journal = {日本機械学会機講論},
  year = 1990,
}

@article{CTT100486307,
  author = {MIKIO HORIE},
  title = {ファジィ理論に基づく対話形機構選定システムに関する研究},
  journal = {日本機械学会論文集C編},
  year = 1990,
}

@article{CTT100486306,
  author = {堀江三喜男 and 舟橋宏明 and 西岡廉生},
  title = {対偶すきまを考慮した5節閉ループロボットアームの高精度化に関する研究},
  journal = {日本機械学会論文集C編},
  year = 1989,
}

@article{CTT100473585,
  author = {Hiroaki FUNABASHI and Mikio HORIE and Tetsuya KUBOTA and Yukio TAKEDA},
  title = {A development of Spatial Parallel Manipulators with Six Degrees of Freedom},
  journal = {International Conference on ADVANCED MECHATRONICS},
  year = 1989,
}

@article{CTT100486314,
  author = {MIKIO HORIE},
  title = {作業領域と静力学特性図に基づくロボット用パンタグラフ機構の総合},
  journal = {日本機械学会論文集(C編)},
  year = 1989,
}

@article{CTT100473586,
  author = {坂本吉弘 and 舟橋宏明 and 堀江三喜男 and 小川　潔},
  title = {最適対偶交差を有する平面機構の総合},
  journal = {日本機械学会論文集},
  year = 1989,
}

@article{CTT100473608,
  author = {MIKIO HORIE},
  title = {入出力運動形式を考慮した機構系の自動生成},
  journal = {日本機械学会機講論},
  year = 1988,
}

@article{CTT100473609,
  author = {MIKIO HORIE},
  title = {作業領域と静力学特性図に基づくロボット用パンタグラフ機構の総合},
  journal = {日本機械学会機講論},
  year = 1988,
}

@article{CTT100473606,
  author = {MIKIO HORIE},
  title = {最適対偶交差を有する平面機構の総合},
  journal = {日本機械学会講演概要集},
  year = 1988,
}

@article{CTT100473581,
  author = {堀江三喜男 and 舟橋宏明},
  title = {対偶に遊びのあるスライダクランク機構の連接棒の形状決定},
  journal = {精密工学会誌},
  year = 1987,
}

@article{CTT100473583,
  author = {Mikio HORIE and Hiroaki FUNABASHI and Kiyoshi OGAWA and Yukiyasu MORI and Ren'ich YUGUCHI},
  title = {A kineto-elastodynamic Analysis of Planar Link Mechanisms with Three-dimensional Offsets and Clearances},
  journal = {JSME International Journal},
  year = 1987,
}

@article{CTT100486303,
  author = {堀江三喜男 and 舟橋宏明 and 小川　潔 and 森　幸康 and 湯口　廉一},
  title = {オフセットを有する平面機構の動的解析},
  journal = {日本機械学会論文集C編},
  year = 1986,
}

@article{CTT100473584,
  author = {堀江三喜男 and 舟橋宏明 and 小川　潔 and 湯口　廉一},
  title = {対偶の遊びとオフセットを有する平面機構の動的解析},
  journal = {日本機械学会論文集},
  year = 1986,
}

@article{CTT100473582,
  author = {堀江三喜男 and 舟橋宏明 and 小川　潔},
  title = {対偶に遊びのある機構の加減速時の特性},
  journal = {日本機械学会論文集},
  year = 1986,
}

@article{CTT100473580,
  author = {Mikio HORIE and Hiroaki FUNABASHI and Kiyoshi OGAWA and Hiroshi ABE},
  title = {Dynamic Characteristics of Planar Link Mechanisms with Clearances(Restraints of Separation between Pairing Elements)},
  journal = {Bulletin of the JSME},
  year = 1986,
}

@article{CTT100473579,
  author = {Mikio HORIE and Hiroaki FUNABASHI and Kiyoshi OGAWA and Hiroshi ABE},
  title = {Dynamic Characteristics of Planar Link Mechanisms with Clearances(Conditions of Separation Occurrence between Paring Elements)},
  journal = {Bulletin of the JSME},
  year = 1986,
}

@article{CTT100473578,
  author = {Mikio HORIE and Hiroaki FUNABASHI and Kiyoshi OGAWA and Yasuo NAITO and Naoki SHOJI},
  title = {A Kineto-Elastodynamic Analysis of Planar Link Mechanisms with Consideration of Bearing Clearances},
  journal = {Bulletin of the JSME},
  year = 1986,
}

@article{CTT100473604,
  author = {MIKIO HORIE},
  title = {対偶に遊びのある機構の加減速時の特性},
  journal = {日本機械学会講演概要集},
  year = 1986,
}

@article{CTT100473577,
  author = {Mikio HORIE and Hiroaki FUNABASHI and Kiyoshi OGAWA and Hiroshi KOBAYASHI},
  title = {A Displacement Analysis of Spatial Four-Bar Mechanisms with Clearances and Tolerances},
  journal = {Bulletin of the JSME},
  year = 1985,
}

@article{CTT100486302,
  author = {堀江三喜男 and 舟橋宏明 and 小川　潔 and 阿部　弘},
  title = {対偶に遊びのある機構の動特性(対偶素間の分離の抑制)},
  journal = {日本機械学会論文集C編},
  year = 1985,
}

@article{CTT100486301,
  author = {堀江三喜男 and 舟橋宏明 and 小川　潔 and 阿部　弘},
  title = {対偶に遊びのある機構の動特性(対偶素間の分離の発生条件)},
  journal = {日本機械学会論文集C編},
  year = 1985,
}

@article{CTT100486300,
  author = {堀江三喜男 and 舟橋宏明 and 小川　潔 and 内藤保雄 and 小路直規},
  title = {対偶の遊びと節の弾性を考慮した機構の動的解析},
  journal = {日本機械学会論文集C編},
  year = 1985,
}

@article{CTT100473576,
  author = {堀江三喜男 and 舟橋宏明 and 小川　潔 and 小林　宏},
  title = {空間４節機構の誤差を含む変位解析},
  journal = {日本機械学会論文集},
  year = 1984,
}

@article{CTT100486305,
  author = {Mikio HORIE and Hiroaki FUNABASHI},
  title = {Determination of Shapes of Connecting Rods in Slider-crank Mechanisms with Clearances},
  journal = {The 1st International Symp. on Design and Synthesis},
  year = 1984,
}

@article{CTT100473603,
  author = {MIKIO HORIE},
  title = {対偶の遊びとオフセットを有する平面機構の動的解析},
  journal = {日本機械学会　機講論},
  year = 1984,
}

@article{CTT100473602,
  author = {MIKIO HORIE},
  title = {オフセットを有する平面機構の動的解析},
  journal = {日本機械学会機講論},
  year = 1983,
}

@article{CTT100473599,
  author = {MIKIO HORIE},
  title = {対偶の遊びと節の弾性を考慮した機構の動的解析},
  journal = {日本機械学会機講論},
  year = 1982,
}

@article{CTT100473601,
  author = {MIKIO HORIE},
  title = {対偶に遊びのある機構の動特性(対偶素間の分離の抑制)},
  journal = {日本機械学会機講論},
  year = 1982,
}

@article{CTT100473600,
  author = {MIKIO HORIE},
  title = {対偶に遊びのある機構の動特性(対偶素間の分離の発生条件)},
  journal = {日本機械学会機講論},
  year = 1982,
}

@article{CTT100473575,
  author = {Mikio HORIE and Hiroshi SHIMOJIMA and Kazuo AKAGAMI and Kiyoshi OGAWA},
  title = {A Displacement Analysis of Overconstrained Mechanisms},
  journal = {Bulletin of the JSME},
  year = 1982,
}

@article{CTT100473574,
  author = {堀江三喜男 and 下嶋　浩 and 赤上　和夫 and 小川　潔},
  title = {運動成分拘束機構の変位解析},
  journal = {日本機械学会論文集},
  year = 1981,
}

@article{CTT100473598,
  author = {MIKIO HORIE},
  title = {空間４節機構の誤差を含む変位解析},
  journal = {日本機械学会機講論},
  year = 1981,
}

@article{CTT100473571,
  author = {Hiroaki FUNABASHI and Kiyoshi OGAWA and Mikio HORIE and Hiroshi IIDA},
  title = {A Dynamic Analysis of the Plane Crank-and-Rocker Mechanisms with Clearances},
  journal = {Bulletin of the JSME},
  year = 1980,
}

@article{CTT100473597,
  author = {MIKIO HORIE},
  title = {対偶に遊びのある機構の動的解析(対偶作用力と動特性について)},
  journal = {日本機械学会機講論},
  year = 1980,
}

@article{CTT100473573,
  author = {Mikio HORIE and Hiriaki FUNABASHI and Kiyoshi OGAWA and Hiroshi KOBAYASHI},
  title = {A Displacement Analysis of Plane Multilink Mechanism with Clearances and Tolerances},
  journal = {Bulletin of the JSME},
  year = 1980,
}

@article{CTT100473572,
  author = {堀江三喜男 and 舟橋宏明 and 小川　潔 and 小林　宏},
  title = {平面多節機構の誤差を含む変位解析},
  journal = {日本機械学会論文集},
  year = 1980,
}

@article{CTT100473596,
  author = {MIKIO HORIE},
  title = {対偶に遊びのある機構の動的総合},
  journal = {日本機械学会機講論},
  year = 1979,
}

@article{CTT100473570,
  author = {舟橋宏明 and 小川　潔 and 堀江三喜男 and 飯田　裕},
  title = {複数の対偶に遊びのある機構の動的解析},
  journal = {日本機械学会論文集},
  year = 1979,
}

@article{CTT100473569,
  author = {Hiroaki FUNABASHI and Kiyoshi OGAWA and Mikio HORIE},
  title = {A Dynamic Analysis of Mechanisms with Clearances},
  journal = {Bulletin of the JSME},
  year = 1978,
}

@article{CTT100473595,
  author = {MIKIO HORIE},
  title = {運動成分拘束機構の変位解析},
  journal = {日本機械学会機講論},
  year = 1978,
}

@article{CTT100473568,
  author = {舟橋宏明 and 小川　潔 and 堀江三喜男},
  title = {対偶に遊びのある機構の動的解析},
  journal = {日本機械学会論文集},
  year = 1978,
}

@article{CTT100473593,
  author = {MIKIO HORIE},
  title = {複数の対偶に遊びのある機構の動的解析},
  journal = {日本機械学会機講論},
  year = 1977,
}

@article{CTT100473594,
  author = {MIKIO HORIE},
  title = {平面多節機構の誤差を含む変位解析},
  journal = {日本機械学会機講論},
  year = 1977,
}

@article{CTT100473592,
  author = {MIKIO HORIE},
  title = {対偶に遊びのある機構の動的解析},
  journal = {日本機械学会機講論},
  year = 1976,
}

@inproceedings{CTT100406309,
  author = {S. C. Choi and Y. Ando and H. Fujie and Mikio Horie},
  title = {Analysis of pull-off forces between Surfaces having periodic nanoscale asperity arrays},
  booktitle = {Proceedings of the 1st International Conference on Manufacturing, Machine Design and Triology},
  year = 2005,
}

@inproceedings{CTT100403504,
  author = {Yudai Okabe and Daiki Kamiya and Mikio Horie},
  title = {Large-deflective hinge life in Molded pantograph mechanisms based on cyclic load-bending fatigue test},
  booktitle = {Proceedings of the 1st International Conference on Manufacturing, Machine Design and Triology},
  year = 2005,
}

@inproceedings{CTT100403503,
  author = {Daiki Kamiya and Mikio Horie},
  title = {Investigation of the wetting behavior of electrically-induced wetting on Silicon Substrates},
  booktitle = {Proceedings of the 1st International Conference on Manufacturing, Machine Design and Tribology},
  year = 2005,
}

@inproceedings{CTT100403499,
  author = {Mikio Horie and Yudai Okabe and Masahiro Yamamoto and Daiki Kamiya},
  title = {Study on long life large-deflective hinges in molded pantograph mechanisms based on cyclic load-bending fatigue test},
  booktitle = {Proc. of 2005 International Symposium on Electronics Materials ad Packaging(EMAP2005)},
  year = 2005,
}

@inproceedings{CTT100403506,
  author = {Mikio HORIE},
  title = {Micromanipulators composed of flexural hinges, large-deflective elastic hinges, and large-deflective hinges},
  booktitle = {Proc. of the 1st. International Conference on Design Engineering and Science(ICDES2005)},
  year = 2005,
}

@inproceedings{CTT100403508,
  author = {柚場 誉嗣 and 岩田 英樹 and 神谷 大揮 and 堀江三喜男},
  title = {研磨プロセスを用いたMEMS静電駆動アクチュエータの試作},
  booktitle = {2005年度精密工学会秋季大会学術講演論文集},
  year = 2005,
}

@inproceedings{CTT100403507,
  author = {蔵　智彦 and 神谷 大揮 and 堀江三喜男},
  title = {射出成形製３ＰＲＲ連節からなる３自由度平面パラレルマニピュレータの出力節の振動特性},
  booktitle = {日本機械学会年次大会講演論文集},
  year = 2005,
}

@inproceedings{CTT100403510,
  author = {Thomas Thuemmel and Robert Huber and Mikio Horie and Chikara Ishikawa},
  title = {Motion control design of a molded　pantograph mechanism　with large-deflective hinges},
  booktitle = {ABSTRACTS IUTAM Symposium(Vibration Control of Nonlinear Mechanisms and Structures)},
  year = 2005,
}

@inproceedings{CTT100403513,
  author = {Mikio HORIE},
  title = {The history of domestic conference of MD&T division in JSME and my research activities(Research and development of miniature surface mount systems in one room factory)},
  booktitle = {Proceedings of the 1st. KSME-JSME Joint International Conference on Manufacturing, Machine Design and Tribology},
  year = 2005,
}

@inproceedings{CTT100403514,
  author = {Mikio Horie},
  title = {Micro/Nano Mechanisms},
  booktitle = {IFToMM Terminology Meeting},
  year = 2005,
}

@inproceedings{CTT100387602,
  author = {Mikio HORIE and Masahiro YAMAMOTO and Daiki KAMIYA},
  title = {Bending and Tecnsile-Compressive Fatigue Test of Hinges in Pantograph Mechanisms made from Injection Molding Machines},
  booktitle = {Proc. of the 6th International Conference on Electronics Materials and Pachaging(EMAP2004)},
  year = 2004,
}

@inproceedings{CTT100387600,
  author = {Daiki KAMIYA and Yoshihiro GAMO and Mikio HORIE},
  title = {Micro Tube Manufacturing Method of Tube-shaped Dilatation Micromanipulator Made of Shape Memory Polymer},
  booktitle = {ASPE　Annual Meeting, CD-ROM},
  year = 2004,
}

@inproceedings{CTT100387599,
  author = {Mikio HORIE},
  title = {Palmtop Surface Mount System Composed of Molded Pantograph Mechanisms with Large-Deflective Hinges and Links using in a One-Room Factory},
  booktitle = {Proceeding of the 4th International Workshop on Microfactories(IWMF2004)},
  year = 2004,
}

@inproceedings{CTT100387598,
  author = {Daiki KAMIYA and Saeed BAGHERI and Mikio HORIE},
  title = {Mathematical modeling and design of a novel 2-DOF micro attraction actuator for a micro optical switch},
  booktitle = {Proc. SPIE; MEMS, MOEMS and Micromachining},
  year = 2004,
}

@inproceedings{CTT100387597,
  author = {Daiki KAMIYA and Mikio HORIE},
  title = {Experimental observation of the electrical properties of electrowtting on silicon single-crystal substrates},
  booktitle = {Proceeding of fourth international symposium on contact angle, wettability, and adhesion},
  year = 2004,
}

@inproceedings{CTT100387596,
  author = {Daiki KAMIYA and Mikio HORIE},
  title = {Initial investigation into the mechanisms of electrically-induced wetting on silicon substrates, Proceeding of fourth international discussion meeting on electrowetting},
  booktitle = {Proceeding of fourth international discussion meeting on electrowetting},
  year = 2004,
}

@inproceedings{CTT100387595,
  author = {Saeed BAGHERI and Daiki KAMIYA and Mikio HORIE},
  title = {Shape Determination of the Micro Manipulator for Multi Input-Output Optical Switches},
  booktitle = {IEEE/LEOS Optical MEMS 2004(International Conference on Optical MEMS and Their Applications)},
  year = 2004,
}

@inproceedings{CTT100387592,
  author = {Motoko IWADARE and Itsuro KAJIWARA and Ryo TSUCHIYA and Mikio HORIE},
  title = {Integrated Actuator/Control Design of Smart Pantograph Mechanism for Vibration Suppression},
  booktitle = {Proceeding of IEEE 2004,CCA/ISIC/CACSD},
  year = 2004,
}

@inproceedings{CTT100387589,
  author = {Mikio HORIE and Daiki KAMIYA and Masaru TOMIMATSU},
  title = {Load Cyclic Characteristics of Large-Deflective Hinges in Moulded Pantograph Mechanisms with Hinges and Links},
  booktitle = {Romansy 2004},
  year = 2004,
}

@inproceedings{CTT100387585,
  author = {Yuki ISHII and Thomas THUEMMEL and Mikio HORIE},
  title = {Modeling and Simulation of a Molded Pantograph Mechanism with Large-Deflective Hinges and Links},
  booktitle = {Proceedings of the 11th World Congress in Mechanism and Machine Science(IFToMM),CD-ROM},
  year = 2004,
}

@inproceedings{CTT100387584,
  author = {Daiki KAMIYA and Yoshihiro GAMO and Mikio HORIE},
  title = {Study on Tube-shaped Dilatation Micromanipulator made of Shape Memory Polymer},
  booktitle = {Proceedings of the 11th World Congress in Mechanism and Machine Science(IFToMM)},
  year = 2004,
}

@inproceedings{CTT100387601,
  author = {Mikio HORIE},
  title = {Mechano-Micro/Nano Systems},
  booktitle = {Proc. SPIE; Optomechatronic Micro/Nano Components, Devices, and Systems (OE110); Optics EAST2004},
  year = 2004,
}

@inproceedings{CTT100387594,
  author = {神谷 大揮 and 堀江三喜男 and 杉原　輝哉},
  title = {面外延伸成形による熱可塑性樹脂製マイクロ構造の試作},
  booktitle = {日本機械学会年次大会講演論文集},
  year = 2004,
}

@inproceedings{CTT100387591,
  author = {岩垂素子 and 梶原逸朗 and 堀江三喜男},
  title = {スマートパンタグラフ機構におけるアクチュエータと制御の統合的最適化},
  booktitle = {日本機械学会,Dynamics and Design Conference 2004,CD-ROM論文集},
  year = 2004,
}

@inproceedings{CTT100387590,
  author = {岩垂素子 and 大橋史武 and 土谷亮 and 梶原逸朗 and 堀江三喜男},
  title = {パンタグラフ機構のスマート構造化による振動制御},
  booktitle = {日本機械学会関東支部第10期総会講演会講演論文集},
  year = 2004,
}

@inproceedings{CTT100387588,
  author = {神谷大揮 and 芝田　稔 and 堀江三喜男 and 杉原輝哉},
  title = {形状記憶樹脂製膨膜形マイクロマニピュレータのための超音波加熱に関する基礎実験},
  booktitle = {日本機械学会,機素潤滑設計部門，第４回機素潤滑設計部門講演会講演論文集},
  year = 2004,
}

@inproceedings{CTT100387587,
  author = {山本真広 and 神谷大揮 and 堀江三喜男},
  title = {射出成形製パンタグラフ機構における大変形ヒンジの引張･圧縮‐曲げ疲労試験},
  booktitle = {日本機械学会,機素潤滑設計部門，第４回機素潤滑設計部門講演会講演論文集},
  year = 2004,
}

@inproceedings{CTT100387586,
  author = {ザイード　バゲリ and 神谷  大揮 and 堀江 三喜男 and 杉原　輝哉},
  title = {マルチ入出力光スイッチ用マイクロマニピュレータのはり要素の形状寸法決定},
  booktitle = {日本機械学会,情報・知能・精密機器部門講演会講演論文集},
  year = 2004,
}

@inproceedings{CTT100387593,
  author = {堀江三喜男},
  title = {新しい機械要素「大変形ヒンジ」の創成とワンルームファクトリー内小形表面実装システムへの展開},
  booktitle = {日本機械学会年次大会講演論文集},
  year = 2004,
}

@inproceedings{CTT100760860,
  author = {MIKIO HORIE},
  title = {高分子製２自由度パンタグラフ機構の動的総合および高分子製３自由度空間パラレルマニピュレータの量の総合},
  booktitle = {2018年度精密工学会春季大会講演論文集(CD-ROM)},
  year = 2018,
}

@inproceedings{CTT100760859,
  author = {MIKIO HORIE},
  title = {Polymer-made Planar and Spatial Mechanisms for Manufacturing Systems},
  booktitle = {EMAP2017(CD-ROM)},
  year = 2017,
}

@inproceedings{CTT100760858,
  author = {MIKIO HORIE},
  title = {高分子製ヒンジとリンクからなる機構の設計・開発},
  booktitle = {2017年度精密工学会秋季大会講演論文集(CD-ROM)},
  year = 2017,
}

@inproceedings{CTT100760857,
  author = {MIKIO HORIE},
  title = {Polymer-made Planar and Spatial Mechanisms for One-Room-Factory in Smart City},
  booktitle = {The 1st TUM Research Alumni Conference, Living and Mobility in Smart Cities(CD-ROM)},
  year = 2017,
}

@inproceedings{CTT100760856,
  author = {MIKIO HORIE},
  title = {Polymer-made Lightweight Planar Mechanisms and Spatial Mechanisms for Space Robots},
  booktitle = {ICMAE 2017(CD-ROM)},
  year = 2017,
}

@inproceedings{CTT100742123,
  author = {Mikio Horie},
  title = {Study on Polymer-made Planar Mechanisms and Spatial Mechanisms and their Applications},
  booktitle = {Journal of the 7th International Conference on Manufacturing, Machine Design and Tribology - ICMDT 2017 -},
  year = 2017,
}

@inproceedings{CTT100742122,
  author = {Seungchol Choi and Mikio Horie},
  title = {Suppression effect of beam wave motion in a micro-spiral beam device},
  booktitle = {Journal of International Conference on Industrial Engineering and Applications (ICIEA 2017)},
  year = 2017,
}

@inproceedings{CTT100735900,
  author = {MIKIO HORIE},
  title = {Study on Polymer-made 3DOF Spatial Parallel Manipulator},
  booktitle = {Proceeding of MAMM-2016},
  year = 2016,
}

@inproceedings{CTT100735903,
  author = {MIKIO HORIE and Issei Unezawa},
  title = {高分子製3自由度空間パラレルマニピュレータの設計・開発},
  booktitle = {2016年度精密工学会秋季大会学術講演会講演論文集(CD-ROM)},
  year = 2016,
}

@inproceedings{CTT100735901,
  author = {MIKIO HORIE},
  title = {A Polymer-made 3DOF Spatial Parallel Manipulator for Cell Production System},
  booktitle = {Proceeding of EMAP2016(CD-ROM)},
  year = 2016,
}

@inproceedings{CTT100702962,
  author = {MIKIO HORIE},
  title = {Design and Fabrication Technology for Micro-Mechanical Motion Systems},
  booktitle = {Proceeding of IFToMM2015(CD-ROM), “Micro Fabrication Technologies” Forum (Invited)},
  year = 2015,
}

@inproceedings{CTT100702963,
  author = {MIKIO HORIE},
  title = {Polymer-made Robot Mechanisms and their Applications},
  booktitle = {Proceeding of IFToMM2015(CD-ROM)},
  year = 2015,
}

@inproceedings{CTT100702964,
  author = {MIKIO HORIE},
  title = {A mechanism design of the manipulator for microobjects and its mechanism polymerizing},
  booktitle = {Proceeding of EMAP2015 (The 17th Electronic Materials and Packaging Conference)},
  year = 2015,
}

@inproceedings{CTT100690798,
  author = {Mikio HORIE},
  title = {Two-arms micromanipulator by use of pantograph mechanisms  for gripping-and-assembling of micro-objects},
  booktitle = {Proceeding of the 6th International Conference on Manufacturing, Machine Design and Tribology},
  year = 2015,
}

@inproceedings{CTT100690799,
  author = {MIKIO HORIE},
  title = {高分子製マイクロメカニズムとその応用},
  booktitle = {2014年度精密工学会秋季大会講演論文集(CD-ROM)},
  year = 2014,
}

@inproceedings{CTT100690802,
  author = {采澤一成 and MIKIO HORIE and 斎藤岳彦 and 小林美佐夫},
  title = {球対偶に対応する大変形ヒンジのFEM解析},
  booktitle = {2014年度精密工学会秋季大会講演論文集(CD-ROM)},
  year = 2014,
}

@inproceedings{CTT100690804,
  author = {MIKIO HORIE},
  title = {左右2腕微小対象物用マイクロマニピュレータシステムの研究開発},
  booktitle = {2013年度精密工学会秋季大会講演論文集(CD-ROM)},
  year = 2013,
}

@inproceedings{CTT100690817,
  author = {Xin Li and Mikio Horie and Toshiharu Kagawa},
  title = {An Experimental Investigation on Vortex-type Bearing},
  booktitle = {Journal of  2011 International Conference on Fluid Power and Mechatronics},
  year = 2011,
}

@inproceedings{CTT100690818,
  author = {Xin Li and Mikio Horie and Toshiharu Kagawa},
  title = {Development of a new non-contact handling device using swirl vanes},
  booktitle = {Proceedings of  the 4th International Conference on Manufacturing, Machine Design and Tribology},
  year = 2011,
}

@inproceedings{CTT100690819,
  author = {Mikio HORIE and Seungchol CHOI},
  title = {Micro Hinges and their Application to Micro Robot Mechanisms},
  booktitle = {ROMANSY 18, Robot Design, Dynamics, and Control},
  year = 2010,
}

@inproceedings{CTT100593744,
  author = {Chalermrat Techakasem and MIKIO HORIE and Seung Chol Choi},
  title = {Displacement Characteristic of a 3-DOF Active Polymer Hinge for Snake-like Manipulator},
  booktitle = {Proceeding of the 11th., International Conference on Electronic Materials and Packaging(EMAP2009)},
  year = 2009,
}

@inproceedings{CTT100593743,
  author = {MIKIO HORIE},
  title = {Development of Large Deflection Spiral Shaped Micromirror Actuator for Optical Switches},
  booktitle = {Proceeding of ASPEN2009},
  year = 2009,
}

@inproceedings{CTT100593742,
  author = {MIKIO HORIE and DAIKI KAMIYA and Seid Hossein Sadat},
  title = {Displacement of micromirror composed of large-deflection spiral beams},
  booktitle = {Proceeding of ISOT09(CD-ROM)},
  year = 2009,
}

@inproceedings{CTT100593741,
  author = {Chalermrat Techakasem and MIKIO HORIE},
  title = {Development of plastic manipulator for sinus surgery tool},
  booktitle = {Proc. of the 3rd. International Conference on Manufacturing, Machine Design and Tribology},
  year = 2009,
}

@inproceedings{CTT100593740,
  author = {MIKIO HORIE},
  title = {A New Surface Mount System using Miniature Plastic Pantograph Mechanisms},
  booktitle = {Proceeding of the MIPE2009(CD-ROM),},
  year = 2009,
}

@inproceedings{CTT100593739,
  author = {MIKIO HORIE},
  title = {新しい極微機械要素からなる精密機構  -大変形ヒンジとその極微要素マニピュレーションシステムへの応用-},
  booktitle = {},
  year = 2009,
}

@inproceedings{CTT100570356,
  author = {MIKIO HORIE},
  title = {小形マニピュレータ群からなる表面実装システムの動作シミュレーション},
  booktitle = {日本機械学会年次大会講演論文集},
  year = 2009,
}

@inproceedings{CTT100570339,
  author = {MIKIO HORIE},
  title = {A Miniature 3-DOF Mobile Robot with Three Legs made by Injection Molding Pantograph Mechanisms},
  booktitle = {Proceeding of the MOVIC2008(CD-ROM)},
  year = 2009,
}

@inproceedings{CTT100570338,
  author = {MIKIO HORIE},
  title = {Development of a Miniature Surface Mount System Using Injection Molding Pantograph Mechanisms},
  booktitle = {Proceeding of the EMAP2008(CD-ROM)},
  year = 2008,
}

@inproceedings{CTT100570341,
  author = {MIKIO HORIE},
  title = {出力節一定姿勢の射出成形製パンタグラフ機構の試作},
  booktitle = {日本機械学会年次大会講演論文集},
  year = 2008,
}

@inproceedings{CTT100570343,
  author = {MIKIO HORIE},
  title = {水平面内駆動射出成形パンタグラフ機構のためのヒンジ試験片を用いたヒンジ変形特性},
  booktitle = {日本機械学会年次大会講演論文集},
  year = 2008,
}

@inproceedings{CTT100570342,
  author = {MIKIO HORIE},
  title = {マイクロマニピュレータ用力センサの開発},
  booktitle = {日本機械学会年次大会講演論文集},
  year = 2008,
}

@inproceedings{CTT100570340,
  author = {MIKIO HORIE},
  title = {回転機能を持たない真空ピンセット開発のための小形表面実装機用電子部品の表面実装},
  booktitle = {日本機械学会年次大会講演論文集},
  year = 2008,
}

@inproceedings{CTT100570337,
  author = {MIKIO HORIE},
  title = {Design of the Injection-Molding Pantograph Mechanism Driven in the Horizontal Plane for Grasping and Assembling Small Objects},
  booktitle = {Proceeding of the ROMANSY2008},
  year = 2008,
}

@inproceedings{CTT100570344,
  author = {MIKIO HORIE},
  title = {マイクロ接触面積に対する引き離し力の定量化},
  booktitle = {日本機械学会第８回機素潤滑設計部門講演会講演論文集},
  year = 2008,
}

@inproceedings{CTT100570348,
  author = {MIKIO HORIE},
  title = {Fundamental research for the horizontal plane drive of an injection-molding pantograph mechanism for grasping and assembling a small object within a fixed view},
  booktitle = {Proceeding of the EMAP2007},
  year = 2007,
}

@inproceedings{CTT100570351,
  author = {MIKIO HORIE},
  title = {Development of Two Arm Micromanipulator for Handling and Assembling of Minute Objects in Fixed View by Use of Pantograph Mechanisms},
  booktitle = {Program Guide & Digests of ISOT2007(International Symposium on Optomechatronic Technologies},
  year = 2007,
}

@inproceedings{CTT100570354,
  author = {MIKIO HORIE},
  title = {固定視野内微小物把持組立用射出成形パンタグラフ機構の水平面内駆動のための基礎的研究},
  booktitle = {第２回医工連携・バイオニクス国際シンポジウム講演論文集},
  year = 2007,
}

@inproceedings{CTT100570353,
  author = {MIKIO HORIE},
  title = {射出成形パンタグラフ機構を用いた3脚振動形移動ロボットに関する研究},
  booktitle = {日本機械学会, 機素潤滑設計部門, MPT2007 シンポジウム<伝動装置>講演論文集},
  year = 2007,
}

@inproceedings{CTT100570350,
  author = {MIKIO HORIE},
  title = {Dynamic Characteristics of a Miniature 3-Dof Mobile Robot with Three Legs Made by Injection Molding Pantograph Mechanisms},
  booktitle = {Proceeding of the 4th Japan-Taiwan Workshop on Mechanical and Aerospace Engineering},
  year = 2007,
}

@inproceedings{CTT100570357,
  author = {MIKIO HORIE},
  title = {形状記憶樹脂製マイクロマニピュレータのための超音波加熱に関する研究},
  booktitle = {日本機械学会年次大会講演論文集},
  year = 2007,
}

@inproceedings{CTT100570355,
  author = {MIKIO HORIE},
  title = {射出成形パンタグラフ機構を用いた表面実装システムの開発},
  booktitle = {日本機械学会年次大会講演論文集},
  year = 2007,
}

@inproceedings{CTT100570349,
  author = {MIKIO HORIE},
  title = {Design of Micro/Nano Robot Mechanisms (Having a long-life of Large-Deflective Hinges in Plastic Robot Mechanisms)},
  booktitle = {Proceeding of the ASPEN2007(CD-ROM)},
  year = 2007,
}

@inproceedings{CTT100548033,
  author = {DAIKI KAMIYA and MIKIO HORIE},
  title = {AC impedance study on electrically-induced wetting on silicon substrate},
  booktitle = {Proceedings of the 2nd JSME-KSME Joint International Conference on Manufacturing, Machine Design and Tribology},
  year = 2007,
}

@inproceedings{CTT100548029,
  author = {Seid Hossein Sadat and DAIKI KAMIYA and MIKIO HORIE},
  title = {Development of a 2 DOF Micromirror Manipulator as a Free Space Optical Switch},
  booktitle = {Proceedings of the 2nd JSME-KSME Joint International Conference on Manufacturing, Machine Design and Tribology},
  year = 2007,
}

@inproceedings{CTT100570352,
  author = {MIKIO HORIE},
  title = {Development of a vibration miniature moving robot by use of injection molding pantograph mechanisms},
  booktitle = {Proceeding of the HARMST2007},
  year = 2007,
}

@inproceedings{CTT100548027,
  author = {MIKIO HORIE and Koutarou Yamaura and DAIKI KAMIYA},
  title = {固定視野内微小物把持組立用射出成形パンタグラフ機構の水平面内駆動のための基礎的研究},
  booktitle = {第２回医工連携・バイオニクス国際シンポジウム講演論文集},
  year = 2007,
}

@inproceedings{CTT100507676,
  author = {Seung Chol Choi and Mikio Horie and Yasuhisa Ando},
  title = {Cleaning of dust between interactive contact surfaces by applied normal load of artificial stainless-cantilever in AFM},
  booktitle = {The 8th International Conference on Electronic Material and Packaging(EMAP 2006)},
  year = 2006,
}

@inproceedings{CTT100507685,
  author = {Mikio Horie and Daiki Kamiya},
  title = {Micromanipulators composed of Hinges and Links},
  booktitle = {The 8th International Conference on Electronic Material and Packaging(EMAP 2006)},
  year = 2006,
}

@inproceedings{CTT100507677,
  author = {MIKIO HORIE},
  title = {精密機構の新しい機械要素（大変形ヒンジとその極微要素マニピュレーションシステムへの応用）},
  booktitle = {精密工学会　北陸・信越支部総会　特別講演会　資料},
  year = 2006,
}

@inproceedings{CTT100508076,
  author = {DAIKI KAMIYA and YUICHI HOSHIKAWA and MIKIO HORIE},
  title = {リンク形状変更による射出成形パンタグラフ機構ヒンジ部の負荷軽減},
  booktitle = {日本機械学会２００６年度年次大会講演論文集},
  year = 2006,
}

@inproceedings{CTT100508072,
  author = {MIKIO HORIE and DAIKI KAMIYA and ＭＡＳＡＨＩＲＯ ＫＯＮＯ and ＮＡＯＴＯ ＭＯＣＨＩＺＵＫＩ and ＴＥＴＳＵＭＩＣＨＩ ＹＯＤＡ and ＡＫＩＨＡＲＵ ＨＩＧＡＫＩ and ＭＡＳＡＴＯ ＮＡＫＡＭＵＲＡ},
  title = {パンタグラフ機構を用いた固定視野内微小物把持組立用２腕マイクロマニピュレータ},
  booktitle = {第１回医工連携・バイオメカニクス国際シンポジウム講演論文集},
  year = 2006,
}

@inproceedings{CTT100507681,
  author = {Yasuyuki Saito and Mikio Horie and Daiki Kamiya},
  title = {射出成形製パンタグラフ機構の大変形ヒンジの長寿命化},
  booktitle = {第12回 日本IFToMM会議シンポジウム前刷集},
  year = 2006,
}

@inproceedings{CTT100507683,
  author = {Seung Chol Choi and MIKIO HORIE and Yasuhisa Ando},
  title = {窓ガラス表面の埃の除去に関する研究},
  booktitle = {日本機械学会第６回機素潤滑設計部門講演会講演論文集},
  year = 2006,
}

@inproceedings{CTT100508074,
  author = {DAIKI KAMIYA and CHIKARA ISHIKAWA and MIKIO HORIE},
  title = {射出成形一体パンタグラフ機構の異なる共振モードを利用した小形移動ロボット},
  booktitle = {日本機械学会第６回機素潤滑設計部門講演会講演論文集},
  year = 2006,
}

@inproceedings{CTT100507684,
  author = {MIKIO HORIE},
  title = {新しい機械要素／大変形ヒンジとその応用},
  booktitle = {精密工学会第31回マイクロ/ナノシステム研究専門委員会資料},
  year = 2006,
}

@inproceedings{CTT100403505,
  author = {Mikio Horie and Chikara Ishikawa and Robert Huber and Thomas Thuemmel},
  title = {Dynamic output displacement errors of a molded pantograph mechanism with large-deflective hinges},
  booktitle = {Proceeding of the third Taiwan-Japan Workshop on Mechanical and Aerospace Engineering},
  year = 2005,
}

@inproceedings{CTT100452447,
  author = {Mikio Horie},
  title = {Design, Manufacturing, and Mount Systems for Micro Devices},
  booktitle = {InterPACK'01 ( The Pacific RIM/ASME International Electronic Packaging Technical Conference and Exhibition )},
  year = 2001,
}

@inproceedings{CTT100486324,
  author = {Mikio HORIE and Masaki TAKAYAMA and Daiki KAMIYA and Kozo IKEGAMI},
  title = {Development of Pantograph Mechanisms Uniformly Molded with Larg-Deflective Elastic Hinges and Links made from the Same Materials},
  booktitle = {Proc. of Movic'98(The Fourth International Conference on Motion and Vibration Control)},
  year = 1998,
}

@misc{CTT100403509,
  author = {堀江三喜男},
  title = {マイクロ/ナノシステム},
  year = 2005,
}

@misc{CTT100690810,
  author = {Mikio HORIE},
  title = {An Injection Molding Pantograph Mechanism for use of the Miniature Surface Mount System},
  year = 2013,
}

@misc{CTT100595318,
  author = {MIKIO HORIE},
  title = {対偶の遊びを考慮した不等速運動機構の動的総合},
  year = 1988,
}

@misc{CTT100573250,
  author = {MIKIO HORIE and DAIKI KAMIYA},
  title = {マイクロマニピュレータ},
  howpublished = {RegisteredPatent},
  year = 2011,
  month  = {},
  note   = {特願2005-220600(2005/07/29), 特開2007-030137(2007/02/08), 特許第4806229号(2011/08/19)}
}




@phdthesis{CTT100595318,
  author = {MIKIO HORIE},
  title = {対偶の遊びを考慮した不等速運動機構の動的総合},
  school = {Tokyo Institute of Technology},
  year = 1988,
}