論文

• Chanat RATANASUMAWONG, Puwadon ASAWAPICHAYACHOT, Surin PHONGSUPASAMIT, Haruo HOUJOH, Shigeki MATSUMURA. Estimation of Sliding Loss in a Parallel-Axis Gear Pair, Journal of Advanced Mechanical Design, Systems, and Manufacturing, The Japan Society of Mechanical Engineers, Vol. 6, No. 1, pp. 88-103, Jan. 2012.
• 南雲稔也, 松村茂樹, Chanat RATANASUMAWONG, 北條春夫. 歯車のかみあい振動における側帯波の発生機構とその振幅非対称性に関する力学的検討, 日本機械学会論文集Ｃ編, 日本機械学会, Vol. 77, No. 775, pp. 617-623, Mar. 2011.
• Edzrol Niza MOHAMAD, Masaharu KOMORI, Shigeki MATSUMURA, Chanat RATANASUMAWONG, Masanori YAMASHITA, Takushi nomura, Haruo HOUJOH, Aizoh KUBO. Effect of Variations in Tooth flank Form Among Teeth on Gear Vibration and Sensory Evaluation Method Using Potential Gear Noise, Jour. Advanced Mechanical Design, Systems, and Manufacturing, JSME, Vol. 4, No. 6, pp. 1166-1181, Oct. 2010.
• RATANASUMAWONG Chanat, MATSUMURA Shigeki, TATSUNO Tetsuo, HOUJOH Haruo. Estimating Gear Tooth Surface Geometry by Means of the Vibration Measurement: Distinction of the Vibration Characteristics of Gears With Tooth Surface Form Error, Journal of Mechanical Design, American Society of Mechanical Engineers, Vol. 131, p. 101003, Oct. 2009.
• Haruo HOUJOH, RATANASUMAWONG Chanat, SHIGEKI MATSUMURA. Utilization of Synchronous Averaging for Inspection of Tooth Surface Undulations on Gears (Localization of Nonmesh Harmonic Components to Individual Gear), Journal of Applied Mechanics, American Society for Mechanical Engineers (ASME), Vol. 74, pp. 269-278, Mar. 2007.
• Chanat RATANASUMAWONG, Shigeki MATSUMURA, Haruo HOUJOH. Inspection of Tooth Surface Geometry by Means of Vibration Measurement(Assessment of Tooth Surface Undulation from Synchronous Averaged Signal and Application of Frequency Response Function), JSME International Journal C, Vol. 48, No. 4, pp. 704-714, Dec. 2005.

国際会議発表 (査読有り)

• Shigeki Matsumura, Haruo Houjoh, Toshiya Nagumo, Chanat Ratanasumawong. Estimation Method of Mesh Excitation Waveform of a Running Gear Pair (Hybrid Estimation with Vibration Measurement and Simulation), International Conference on Gears, Proceedings of International Conference on Gears, VDI verlag, Nr.2108, pp. 1427-1430, Oct. 2010.
• ratanasumawong chanat, SHIGEKI MATSUMURA, Haruo HOUJOH. Inspection of Tooth Surface Geometry by Means of Vibration Measurement, International Conference on Gears, VDI, Proceedings of International Conference on Gears, VDI-Berichte, No. 1904, pp. 687-703, Sept. 2005.

国際会議発表 (査読なし・不明)

• Chanat Ratanasumawong, Puwadon Asawapichayachot, Haruo Houjoh, Shigeki Matsumura. Estimation of Sliding Loss in a Parallel-Axis Gear Pair, The 4th International Conference on Manufacturing, Proceedings of The 4th International Conference on Manufacturing, p. 11-12, Apr. 2011.
• Haruo HOUJOH, SHIGEKI MATSUMURA, SHUN-ICHI OHSHIMA, ratanasumawong chanat. Understanding Characteristics of Gear Noise in Terms of Vibration Analysis and the Effect of Various Tooth Finishing, 37th International Congress and Exposition on Noise Control Engineering, No.410, Oct. 2008.
• SHIGEKI MATSUMURA, Chanat RATANASUMAWONG, Yuichi OGAWA, SHUN-ICHI OHSHIMA, Haruo HOUJOH. Phase Calibration of Vibration to Estimate Gear Excitation Force Characteristic, ICMDT 2007 JSME-KSME Joint InternationalConference on Manufacturing,Machine Design and Tribology, Proceedings of ICMDT 2007 JSME-KSME Joint InternationalConference on Manufacturing,Machine Design and Tribology, The Japan Society of Mechanical Engineers, pp. A04(CD-ROM), July 2007.
• Chanat RATANASUMAWONG, Haruo HOUJOH, Shigeki MATSUMURA, Michio SAITOH, Yasushi UEDA. Utilization of Synchronous Averaging of Vibration for Diagnosis of Gear System to Estimate Tooth Error, DETC'03 ASME - 9th International Power Transmission and Gearing Conference, Proceedings of DETC'03 ASME - 9th International Power Transmission and Gearing Conference (CD-ROM, DETC2003/PTG), pp. 48030, June 2003.

国内会議発表 (査読なし・不明)

• 松村茂樹, 北條春夫, ﾁｬﾅｯﾄﾗﾀﾅｽﾏｳｫﾝ, 大嶋俊一. 振動計測による歯車系の起振力推定に関する新たな提案, 日本機械学会 第８回機素潤滑設計部門講演会, 日本機械学会 第８回機素潤滑設計部門講演会講演論文集, (社)日本機械学会, No. 08-12, 173-174, Apr. 2008.
• 松村茂樹, 北條春夫, chanat. 動力伝達系の振動計測による歯面形状の特徴推定（位相情報の精密な取り扱いによる起振力推定）, MPT2007シンポジウム＜伝動装置＞, MPT2007シンポジウム＜伝動装置＞講演論文集, 日本機械学会, No. N0.07-15, pp. 131-134, Nov. 2007.
• ﾁｬﾅｯﾄﾗﾀﾅｽﾏｳｫﾝ, 松村茂樹, 北條春夫. 歯車単体の振動個性の抽出 －同期平均による歯面の情報の取得－, 日本機械学会2004年度年次大会, 日本機械学会2004年度年次大会講演論文集（４）, Vol. 04, No. 1, pp. 143-144, Sept. 2004.

[ BibTeX 形式で保存 ]    [ 論文・著書をCSV形式で保存 ]    [ 特許をCSV形式で保存 ]