田辺龍太研究業績一覧 | T2R2 東京科学大学リサーチリポジトリ

田辺龍太研究業績一覧 (7件)

Jiang Zhu, Tomohisa TANAKA, Yoshio SAITO, Ryuta TANABE, Masaaki TAKENAKA, Toru FUKAMI. On-machine Measuring and Machining of Freeform Surface Using a Polar-coordinate Desktop Machine Tool, Journal of Advanced Mechanical Design, Systems, and Manufacturing, The Japan Society of Mechanical Engineers, Vol. 5, No. 4, pp. 240-251, Oct. 2011. 公式リンク

Jiang Zhu, Ryota Tanabe, Tomohisa Tanaka, Yoshio Saito. Polar-coordinate Desktop Machine Tool, an Intelligent Digital 3D Duplicator, the 5th International Conference on Leading Edge Manufacturing in 21st Century (LEM21), Proceedings of the 5th International Conference on Leading Edge Manufacturing in 21st Century (LEM21), The Japan Society of Mechanical Engineers (JSME), No. 09-207, pp. 133-138, Dec. 2009.
Ryuta Tanabe, Jiang Zhu, Tomohisa Tanaka, Yoshio Saito. Measurement and machining using polar coordiante desktop machine tool, the 13th International Machine Tool Engineers' Conference, Proceedings of the 13th International Machine Tool Engineers' Conference, Japan Machine Tool Builders' Association, pp. 72-73, Nov. 2008.
Nobuyuki Iwatsuki, Koichi Morikawa, Yoshito Nishida, Ryota Tanabe. Fabrication of a Micro Cilium Actuator and Its Driving Experiments, 11th International Conference on Mechatronics Technology (ICMT2007), CD-ROM Proc. of 11th International Conference on Mechatronics Technology (ICMT2007), pp. 1-6, Nov. 2007.

田辺龍太, 朱疆, 田中智久, 齋藤義夫. 極座標型デスクトップマシンツールによる３次元形状の加工と計測, ２００９年度精密工学会春季大会学術講演会, ２００９年度精密工学会春季大会学術講演会講演論文集, 精密工学会, pp. 519-520, Mar. 2009.
田辺龍太, 朱疆, 田中智久, 齋藤義夫. 極座標型デスクトップマシンツールを用いた加工, ２００８年度精密工学会秋季大会学術講演会, ２００８年度精密工学会秋季大会学術講演会講演論文集, 精密工学会, pp. 137-138, Sept. 2008.

Ryo Tanabe, Yoshio Saito, Tomohisa Tanaka. Measurement and Machining by using Polar Coordinate Desktop Machine Tool, ICCES’08(International Conference on Computational & Experimental Engineering and Science), Proceeding of ICCES’08(International Conference on Computational & Experimental Engineering and Science), Mar. 2008.