論文

• AKIO NAGAMATSU. Identification of Modal Parameters and Spatial Matrix in Frequency Domain -Application to 3 dimensional Structure-, 自動車技術会発表1998.5/20?22, 1998.
• AKIO NAGAMATSU. Intelligent Control Using Neural Network for Man-Machine System(Safety and Comfortableness of Industrial Vehicle), 日本機械学会論文集C編, Vol. 64, No. 621, pp. 231-238, 1998.
• AKIO NAGAMATSU. Basic Consideration on Precision Improvement of Frequency Response Function using Burst Random Controlled Excitation., 日本機械学会論文集C編, Vol. 64, No. 620, pp. 77-80, 1998.
• AKIO NAGAMATSU. Robust Identification and Control Design for Truck Cab Model Device., JSME International Journal, Vol. 2, No. 41, pp. 171-177, 1998.
• AKIO NAGAMATSU. Intergration of Experimental State-Space Modeling Based on ERA and H∞ Control Design., JSME International Journal, Vol. 40-C, No. 2, pp. 197-202, 1997.
• AKIO NAGAMATSU. State-Space Modeling, Uncertainty Descriptions and H∞/μ/γ Control Design for Vibration Suppression., 38th AIAA SDM, No. 1399, pp. 655-663, 1997.
• 長松昭男. 初心者のためのモード解析, 機械の研究, Vol. 49, No. 1, pp. 1-8, 1997.
• AKIO NAGAMATSU. H∞ Control Design of Experimental State-Space Modeling for Vehicle Vibration Sippression, Proceedings of the 1997 Noise and Vibration Conference., Vol. 2, No. p-309, pp. 631-637, 1997.
• AKIO NAGAMATSU. Structural Topology Optimization for Dynamical Design., Int. Conf. JSME OPID, pp. 1-10, 1997.
• 長松昭男. 振動発生のメカニズムと振動対策技術, 工業材料'97, Vol. 45, No. 12, pp. 18-20, 1997.
• AKIO NAGAMATSU. Simultaneous Design of Multiple Dynamic Absorbers by Modal Analysis., Proc. Acoustical Society of America and Acoustical Society of Japan 3rd Joint Meeting., pp. 753-758, 1996.
• AKIO NAGAMATSU. Simultaneous Design of Multiple Dynamic Absorbers by Modal Analysis., Proc. Acoustical Society of America and Acoustical・Society of Japan 3rd Joint Meeting, No. 1pSA3, pp. 753-758, 1996.
• 長松昭男. 周波数領域におけるモード特性同定法の研究(第4報 多モード同定の効率と精度の向上), 日本機械学会論文集C編, Vol. 62, No. 602, pp. 233-240, 1996.
• AKIO NAGAMATSU. Structural Topology Optimization by Genetic Algorithm. (Approaches for Improvement of Calculation Efficiency), ASME 1998 Inverse Problems in Engineering : Theory and Practice., pp. 253-260, 1996.
• AKIO NAGAMATSU. Intergrated Optimum Design of Structure and Servosystem with Dynamic Compensator, 37th AIAA SDM Conf.Cp962, pp. 1005-1075, 1996.
• AKIO NAGAMATSU. Integrated Optimum Design of Structure and Servosystem, 日本機械学会第73期通常総会講演会講演論文集(I), Vol. 96, No. 1, pp. 227-228, 1996.
• 長松昭男. 遺伝的アルゴリズムによる構造物の位相形状最適化(計算効率の向上と実機構造の最適化), 日本機械学会論文集C編, Vol. 62, No. 597, pp. 1731-1738, 1996.
• 長松昭男. 有限要素法とモード解析に基づく高周波領域の振動評価, 日本機械学会論文集C編, Vol. 62, No. 599, pp. 2556-2562, 1996.
• AKIO NAGAMATSU. Concurrent Optimum Design of Structure and H┣D1∞┫D1 Control System by Genetic Algorithm., Third International Conference on Motion and Vibration Control., pp. 327-332, 1996.
• AKIO NAGAMATSU. Integrated Optimum Design of Structure and H┣D1∞┫D1 Control System., AIAA Journal, Vol. 34, No. 1, pp. 159-165, 1996.
• AKIO NAGAMATSU. Integrated Optimum Design of Structure and Servosystem with Dynamic Compensator., AIAA, pp. 1005-1015, 1996.
• 長松昭男. モード解析を用いたトラックキャブのH┣D1∞┫D1ロバスト振動制御, 自動車技術会論文集, Vol. 27, pp. 4, 1996.
• 長松昭男. 振動問題における構造物の形状最適設計, 日本機械学会論文集C編, Vol. 61, No. 587, pp. 2662-2667, 1995.
• AKIO NAGAMATSU. Control of Engine Roll and Bounce Vibration Using Hydraulic Mounts., JSME International Journal Series C., Vol. 38, No. 1, pp. 29-35, 1995.
• AKIO NAGAMATSU. Vibration Control of Engine Roll and Bounce Using Hydraulic Engine Mounts., Journal of Robotics and Mechatronics., Vol. 7, No. 4, pp. 285-294, 1995.
• AKIO NAGAMATSU. Simultaneous Optimum Design of Structure and Control System Using Complex Method., Current Topics in Compultational Mechanics (ASME 1995), Vol. 305, pp. 297-303, 1995.
• AKIO NAGAMATSU. Integrated Optimum Design of Structure and Control System by Modal Analysis., Proceedings of 1995 Design Engineering Technical Conferences, Vol. 3, No. 84-C, pp. 487-494, 1995.
• AKIO NAGAMATSU. Vibration Control with Neural Network Dynamic Compensator., Design Engineering Technical Con., Vol. 3, No. 84-C, pp. 425-431, 1995.
• AKIO NAGAMATSU. Structural Shape Optimization for Improvement of Dynamical Characteristics, Current Topics in Computational Mechanics PVP, Vol. 305, pp. 279-283, 1995.
• AKIO NAGAMATSU. Simulataneous Optimum Design of Structure and Control System Using Complex Method., Current Topics in Computational Mechanics PVP, Vol. 305, 1995.
• AKIO NAGAMATSU. Indentification of Inertial Properties for Resiliently Supported Mechanical System., ASME, Vol. 84, No. 3, pp. 351-357, 1995.
• 長松昭男. 特性行列同定法を用いた剛体特性の同定, 日本機械学会論文集C編, Vol. 61, No. 589, pp. 3526-3531, 1995.
• AKIO NAGAMATSU. Integrated Optimum Design of Structure and Control System by Model Analysis., 1995 Design Engineering Technical Conf. Part C., Vol. 3, pp. 487-494, 1995.
• AKIO NAGAMATSU. Structural Shape Optimization for Improvement of Dynamical Characteristics., Current Topics Computational Mechanics PVP., Vol. 305, 1995.
• AKIO NAGAMATSU. Simultaneous Optimum Desing of Structure and Control System Using Complex Method., Current Topics in Computational Mechanics PVP., Vol. 305, 1995.
• AKIO NAGAMATSU. Identification of Inertial Properties for Resiliently Supported Mechanical System., ASME, Vol. 84, No. 3, pp. 351-357, 1995.
• 長松昭男. 構造系とH∞制御系の同時最適設計, 日本機械学会論文集C編, Vol. 61, No. 583, pp. 231-238, 1995.
• AKIO NAGAMATSU. Integrated Optimum Design of Structure and H ∞ Control System, 36th AIAA / ASME / ASCE / AHS / ASC Structures, Structural Dynamics and Materials Conference, Vol. AIAA-95, No. 1483, pp. 2983-2991, 1995.
• AKIO NAGAMATSU. System Identification by Characteristic Matrices Using the Modal Parameters(An Application to Automotive's Subframe), SEA Techical Paper, pp. 1045-1051, 1995.
• AKIO NAGAMATSU. An Approach for Multi-Reference Identification of Modal Parameters in Frequency Domain, Proc. of the 1995 Noise and Vibration Conf, Vol. 2, pp. 1069-1078, 1995.
• 長松昭男. 疑似最小2乗法による最適化手法, 日本機械学会論文集C編, Vol. 61, No. 587, pp. 2683-2690, 1995.
• 長松昭男. 遺伝的アルゴリズムを用いた構造系とH∞制御系の統合最適設計, 日本機械学会論文集C編, Vol. 61, No. 587, pp. 2704-2711, 1995.
• AKIO NAGAMATSU. Identification of Inertial Properties for Resiliently Supported Mechanical System, 1995 Design Engineering Technical Conf Part C, Vol. 3, pp. 351-357, 1995.
• AKIO NAGAMATSU. Automotive's Vibration Analysis by Dynamic Impedance Method (Available Criterion in Use of Singular Value Decomposition), Journal of Robotics and Mechatronics, Vol. 7, No. 4, pp. 274-279, 1995.
• AKIO NAGAMATSU. Trancient Responce Analysis of Compressor Piping Coupled System Air Conditioning Units, 1995 Design Engineering Technical Conf Part C, Vol. 3, pp. 479-485, 1995.
• AKIO NAGAMATSU. A Vibration Analysis of Compressor-Piping Coupled System in Air Conditioning Units, Current Topics in Computational Mechanics (ASME1995) Vol.305, pp. 305-310, 1995.
• 長松昭男. 周波数領域におけるモード特性同定法の研究。(第一報、線形項と非線形項の分離), 日本機械学会論文集C編, Vol. 61, No. 591, pp. 4214-4221, 1995.
• AKIO NAGAMATSU. 周波数領域におけるモード特性同定法の研究。(第2報、非線形最小2乗法と最適化手法の導入), 日本機械学会論文集C編, Vol. 61, No. 591, pp. 4222-4229, 1995.
• AKIO NAGAMATSU. Inertial Property Identification of Mechanical Structures by Characteristic Matrix, 山梨大学工学部研究報告, No. 46, pp. 1995, 1995.
• AKIO NAGAMATSU. Identification of Inertial Propeteies for Resiliently Supported Mechanical System, DE-Vol.84-3,1995 Design Engineering Tochnical Conferences Volume3-Part C ASNE 1995, pp. 351-357, 1995.
• AKIO NAGAMATSU. Identification of Intertial Properties for Resiliently Supported Mechanical System, 日本機械学会第72期通常総会講演会講演論文集, pp. 453-454, 1995.
• AKIO NAGAMATSU. A Vibration Analysis of Compressor-Piping Coupled System in Air Conditioning Units, The American Society of Mechnical Engineers, pp. 305-310, 1995.
• AKIO NAGAMATSU. Simultaneous Optimum Design of Structure and Control System Using Complex Method, Second International Conference on Motion and Vibration Control (MOVIC), pp. 456-461, 1994.
• AKIO NAGAMATSU. A Study on Practicality of Dynamic Impedance Method in Automotive's Vibration Analysis (An Available Criterion in Use of Generalized Inverse Forming Lowered Rank through Singular Value Decomposition), Second International Conference on Motion and Vibration Control (MOVIC), pp. 892-897, 1994.
• 長松昭男. 振動解析における適切な有限要素分割法に関する研究(第2報、一般三角要素についてのデータベース), 日本機械学会論文集C編, Vol. 60, No. 572, pp. 1144-1150, 1994.
• 長松昭男. ニューラルネットワークによる動的補償器形コントローラの設計と制御(アクティブサスペンションモデルへの応用), 日本機械学会論文集C編, Vol. 60, No. 572, pp. 1296-1302, 1994.
• 長松昭男. 振動インテンシティによる動吸振器の効果, 日本機械学会論文集C編, Vol. 60, No. 574, pp. 1933-1940, 1994.
• 長松昭男. 振動インテンシティの基礎的検討, 日本機械学会論文集C編, Vol. 60, No. 574, pp. 1941-1948, 1994.
• 長松昭男. ニューラルネットワークによる四輪操舵車の制御, 自動車技術会論文集, Vol. 25, No. 4, pp. 86-91, 1994.
• AKIO NAGAMATSU. Approach for Simultaneous Optimization of a Structure and Control System, AIAA Journal, Vol. 32, No. 4, pp. 866-873, 1994.
• AKIO NAGAMATSU. Optimum Design of Structure and Control System by Modal Analysis, Second International Conference on Motion and Vibration Control (MOVIC), pp. 450-455, 1994.
• 長松昭男. ニューラルネットワークを用いた路面の実時間認識と判別, 日本機械学会論文集C編, Vol. 59, No. 564, pp. 2353-2360, 1993.
• 長松昭男. 簡略化モデルよるシリンダブロックの固有モードの識別と振動特性の最適化, 日本機械学会論文集C編, Vol. 59, No. 567, pp. 3283-3290, 1993.
• AKIO NAGAMATSU. Simultaneous Optimum Design of Structure and Control System by Conplex Method, Japanese Society of Mechanical Engineering, Vol. 59, No. 563, pp. 2124-2131, 1993.
• 長松昭男. 流体封入マウントによるエンジンのロールとバウンス方向の制振手法, 日本機械学会論文集C編, Vol. 59, No. 557, pp. 24-29, 1993.
• 長松昭男. ニューラルネットワークによる四輪操舵車の同定と制御, 日本機械学会論文集C編, Vol. 59, No. 559, pp. 708-713, 1993.
• 長松昭男. 可変減衰マウントに最適レギュレータ理論を適用した車両振動制御解析, 日本機械学会論文集C編, Vol. 59, No. 559, pp. 740-745, 1993.
• AKIO NAGAMATSU. Real Time Identification and Classification of Road Surface with Neural Network, Proc. SAE Noise & Vibration Conf., No. 931344, pp. 653-659, 1993.
• 長松昭男. ニューラルネットワークによるヨーレートフィードバック式四輪操舵車の制御, 日本機械学会論文集C編, Vol. 59, No. 562, pp. 1745-1750, 1993.
• 長松昭男. 実験データ参照による有限要素モデルの改良(物性定数による感度の考慮), 日本機械学会論文集C編, Vol. 58, No. 554, pp. 2962-2969, 1992.
• 長松昭男. モード解析を用いた連続体構造物のH∞ロバスト振動制御, 日本機械学会論文集C編, Vol. 58, No. 555, pp. 3238-3245, 1992.
• 長松昭男. 有限要素法を用いた大自由度構造系の自由度縮小によるモデル化と制御系の最適設計, 計測自動制御学会論文集, Vol. 28, No. 3, pp. 383-391, 1992.
• AKIO NAGAMATSU. Optimum Design of Vibration Control System using Modal Analysis and Sensitivity Analysis, Japanese Society of Mechanical Engineering, Vol. 58, pp. 552, 1992.
• 長松昭男. 特性行列同定法に基づく最適制御系の設計法, 日本機械学会論文集C編, Vol. 58, No. 549, pp. 1385-1391, 1992.
• 長松昭男. 実時間演算シュミレーターによるエンジンマウント減衰制御手法の研究, 日本機械学会論文集C編, Vol. 58, No. 554, pp. 2923-2928, 1992.
• 長松昭男. 内燃機関の振動と騒音に関する基礎的研究(第5報、全系の振動と実応答の解析), 日本機械学会論文集C編, Vol. 57, No. 541, pp. 2790-2796, 1991.
• 長松昭男. 特性行列の実験的決定による系の同定(第8報、モデル化制約条件の導入), 日本機械学会論文集C編, Vol. 57, No. 541, pp. 2797-2803, 1991.
• AKIO NAGAMATSU. Simultaneons Optimum Design Method for Multiple Dynamic Absorbers to Control Multiple Resonance Peaks, Japanese Society of Mechanical Engineering, Vol. 57, pp. 534, 1991.
• AKIO NAGAMATSU. Studies of Appropriate Finite Element Modeling for Vibration Analysis(1st Report), Japanese Society of Mechanical Engineering, Vol. 57, pp. 544, 1991.
• AKIO NAGAMATSU. Design of Optical Servo System by Structural Optimization Considering Contorability(1st Report), Japanese Society of Mechanical Engineering, Vol. 55, pp. 516, 1989.
• AKIO NAGAMATSU. A technique of Structural Dynamic Optimization Using Sensitivities of Resonance and Anti-Resonance Frequencies, Japanese Society of Mechanical Engineering, Vol. 54, pp. 505, 1988.
• AKIO NAGAMATSU. Research on Modal Analysis (7th Report Estimation of Variance of the Frequency Resonance Function), Japanese Society of Mechanical Engineering, Vol. 54, pp. 507, 1988.
• AKIO NAGAMATSU. Vibration Analysis by Substructure Syntheses Method (6th Report Apprication to Acoustic Analysis), Japanese Society of Mechanical Engineering, Vol. 53, pp. 493, 1987.

著書

• AKIO NAGAMATSU. Introduction to Modal Analysis, コロナ社, コロナ社, 1993.
• AKIO NAGAMATSU. Dynamics Handbook, 朝倉書店, 朝倉書店, 1993.
• AKIO NAGAMATSU. Substructure Synthesis Method, 培風館, 培風館, 1991.
• AKIO NAGAMATSU. Modal Analysis, 培風館, 培風館, 1985.

学位論文

• 摩擦による不均一塑性変形に関する塑性力学的研究,  本文,  Doctor of Engineering,  東京工業大学,  1970/--/--, 

[ BibTeX 形式で保存 ]    [ 論文・著書をCSV形式で保存 ]    [ 特許をCSV形式で保存 ]