@book{CTT100790064,
  author = {齊藤卓志},
  title = {射出成形金型の機構と製作法／金型の企画・設計／冷却の計算},
  publisher = {プラスチック成形加工学会},
  year = 2019,
}

@book{CTT100785495,
  author = {齊藤卓志},
  title = {材料の溶融を考えるための伝熱基礎},
  publisher = {シーエムシー出版},
  year = 2018,
}

@book{CTT100785496,
  author = {齊藤卓志},
  title = {ポリマー混練時の樹脂の伝熱メカニズム},
  publisher = {(株)技術情報協会},
  year = 2018,
}

@book{CTT100662243,
  author = {Jun Taniguchi and Hiroshi Ito and Jun Mizuno and Takushi Saito},
  title = {Nanoimprint Technology},
  publisher = {John Wiley & Sons Ltd},
  year = 2013,
}

@book{CTT100647048,
  author = {吉野雅彦 and 大竹尚登 and 山本貴富喜 and 山中晃徳 and 中村吉男 and 安田公一 and 齊藤卓志 and 源関聡 and 津島将司 and 黒川悠 and 井上裕嗣 and 山?敬久 and 野崎智洋 and 鈴木俊明 and 梅原徳次 and 近藤行人 and 松村隆 and 楊明 and 月山陽介 and 益満秀治 and 赤上陽一 and 久住孝幸 and 上坂裕之 and 野老山貴行 and 品川一成 and 新保實 and 平山朋子 and 早川邦夫 and 坂井田喜久 and 鈴木清一 and 柏谷智},
  title = {機械屋のための分析装置ガイドブック（日本塑性加工学会編）},
  publisher = {コロナ社},
  year = 2012,
}

@article{CTT100909971,
  author = {戸谷公紀 and 佐山聡 and 齊藤卓志},
  title = {背景型シュリーレン法による軸対称な射出成形品の屈折率分布測定},
  journal = {成形加工},
  year = 2024,
}

@article{CTT100879739,
  author = {Tatsuya Kawaguchi and Yuki Tano and Takushi Saito},
  title = {Experimental Studies on the Taylor-Couette Flow of Shear-Thinning Fluids},
  journal = {International Journal of GEOMATE},
  year = 2022,
}

@article{CTT100879145,
  author = {Kosuke Higashi and Kazuhisa Fukutani and Tatsuya Kawaguchi and Isao Satoh and Takushi Saito},
  title = {Effect of shear-thinning behavior on fluid temperature distribution mixed by single rotor},
  journal = {Journal of Thermal Science and Technology},
  year = 2022,
}

@article{CTT100879144,
  author = {Kosuke Higashi and Kazushisa Fukutani and Tatsuya Kawaguchi and Isao Satoh and Takushi Saito},
  title = {Effect of shear-thinning behavior on interface renewal in partially filled single rotor mixing},
  journal = {Journal of Thermal Science and Technology},
  year = 2022,
}

@article{CTT100862839,
  author = {村本暢広 and 川口達也 and 齊藤卓志},
  title = {銅ナノ粒子多孔質層内における液水浸透挙動と内部構造の関係},
  journal = {伝熱},
  year = 2021,
}

@article{CTT100862405,
  author = {Hesham Khalil and Takushi Saito and Hamdy Hassan},
  title = {Comparative study of heat pipes and liquid-cooling systems with thermoelectric generators for heat recovery from chimneys},
  journal = {International Journal of Energy Research},
  year = 2021,
}

@article{CTT100857885,
  author = {Gea Fardias Mu'min and Tatsuya Kawaguchi and Takushi Saito},
  title = {Droplet breakup of a high-viscosity-ratio system in a nonuniform temperature field under laser irradiation},
  journal = {Phys. Fluids},
  year = 2021,
}

@article{CTT100844115,
  author = {Gea Fardias Mu'min and Tatsuya Kawaguchi and Takushi Saito},
  title = {Study on droplet deformation of an immiscible fluid system by selective radiation heat using infrared laser},
  journal = {Polymer Engineering and Science},
  year = 2021,
}

@article{CTT100844114,
  author = {Ahmed Abdo and Takushi Saito and Shinichi Ookawara and Ali Radwan and Mahmoud Ahmed},
  title = {Experimental study of the performance of concentrator photovoltaic/thermoelectric generator system integrated with a new 3D printed microchannel heat sink},
  journal = {International Journal of Energy Research},
  year = 2021,
}

@article{CTT100811254,
  author = {Tatsuya Kawaguchi and Yoona Jeong and Takushi Saito and Isao Satoh},
  title = {FLOW INVESTIGATIONS WITHIN A CONCENTRIC CYLINDERS OF GAS SENSOR MODULE FOR I.C. ENGINES},
  journal = {International Journal of GEOMATE,},
  year = 2019,
}

@article{CTT100790063,
  author = {齊藤卓志 and 伊原哲志 and 川口達也 and 佐藤勲},
  title = {流動を利用した配向制御による炭素繊維添加高分子複合材料の熱伝導率向上},
  journal = {成形加工},
  year = 2019,
}

@article{CTT100777407,
  author = {曽我宏輔 and 齊藤卓志 and 石川和紀 and 川口達也 and 佐藤勲},
  title = {フィラー添加高分子材料における短時間絶縁破壊の破壊電圧予測},
  journal = {熱物性},
  year = 2017,
}

@article{CTT100752500,
  author = {Kosuke Soga and Takushi Saito and Tatsuya Kawaguchi and Isao Satoh},
  title = {Percolation Effect on Thermal Conductivity of Filler-Dispersed Polymer Composites},
  journal = {Journal of Thermal Science and Technology},
  year = 2017,
}

@article{CTT100694088,
  author = {齊藤卓志 and 川口達也 and 佐藤勲},
  title = {非晶性樹脂の吸湿によるふく射吸収変化を利用したレーザー透過接合法の検討},
  journal = {成形加工},
  year = 2015,
}

@article{CTT100662242,
  author = {Takushi Saito and Tatsuya Kawaguchi and Isao Satoh},
  title = {Dispersion control of immiscible polymer blend using selective heating by infrared laser irradiation},
  journal = {Journal of Applied Polymer Science},
  year = 2013,
}

@article{CTT100812481,
  author = {Pudpong, T. and Buahom, P. and Areerat, S. and Rungseesantivanon, W. and Satoh, I. and TAKUSHI SAITO},
  title = {The effects of processing parameters on the residual wall thickness distribution at the sharp angle corner of water assisted injection molded parts},
  journal = {International Polymer Processing},
  year = 2013,
}

@article{CTT100642486,
  author = {齊藤卓志 and 朴鍾協 and 川口達也 and 佐藤勲},
  title = {炭酸ガスレーザー照射による樹脂成形体表面への導電性パターン形成の試み},
  journal = {成形加工},
  year = 2012,
}

@article{CTT100632033,
  author = {川口 達也 and 齊藤 卓志 and 佐藤 勲},
  title = {ダイナミックレーザ干渉画像法による液滴蒸発過程の多次元計測},
  journal = {日本機械学会論文集Ｂ編},
  year = 2011,
}

@article{CTT100632034,
  author = {関口 智大 and 川口 達也 and 齊藤 卓志 and 佐藤 勲},
  title = {マイクロ・ナノバブルのブラウン運動の画像解析},
  journal = {日本機械学会論文集Ｂ編},
  year = 2011,
}

@article{CTT100634972,
  author = {石見浩之 and 福岡正義 and 斉藤卓志 and 濱田泰以},
  title = {射出成形における”表面転写/裏面ヒケ”現象のメカニズム解明と実用可能性の探究},
  journal = {成形加工},
  year = 2011,
}

@article{CTT100629210,
  author = {Takushi Saito and Tatsuya Kawaguchi and Isao Satoh},
  title = {A Study on Micro-scale Flow Behavior of Thermoplastic Polymeric Material},
  journal = {Journal of Photopolymer Science and Technology},
  year = 2011,
}

@article{CTT100610776,
  author = {齊藤卓志 and 川口達也 and 佐藤勲},
  title = {可視化観察による熱インプリントプロセスの特徴把握と実験的考察},
  journal = {電気学会論文誌E（センサ・マイクロマシン部門誌）},
  year = 2010,
}

@article{CTT100589076,
  author = {伊東宏 and 佐藤勲 and 斉藤卓志 and 焼本和利},
  title = {微細形状転写プロセスにおけるスタンパと溶融ポリマーとの粘着効果},
  journal = {成形加工},
  year = 2009,
}

@article{CTT100582753,
  author = {伊東宏 and 佐藤勲 and 斉藤卓志 and 焼本和利},
  title = {溶融樹脂の塗布による微細転写挙動の基礎的研究},
  journal = {成形加工},
  year = 2009,
}

@article{CTT100566053,
  author = {齊藤卓志 and 井手慎之介 and 伊藤浩志 and 安原鋭幸 and 川口達也 and 佐藤勲},
  title = {ポリプロピレン薄肉射出成形品のウェルドに関する研究},
  journal = {成形加工},
  year = 2008,
}

@article{CTT100534323,
  author = {Hiroshi Ito and Isao Satoh and Takushi Saito and Kazutoshi Yakemoto},
  title = {Development of a Novel Transcrption Molding Process to Fabricate Sophisticated Polymer Products with Precise Microstructure and High Transparency Applicable to Display Devices and Bio-chips},
  journal = {International Polymer Processing},
  year = 2007,
}

@article{CTT100534324,
  author = {Yihua Gu and Isao Satoh and Takushi Saito and Tatsuya Kawaguchi},
  title = {Heat Transfer in Segregated Fluidized Beds Part 1: Relation between Particle and Temperature Segregation and Dominating Heat Transfer Mechanisms},
  journal = {Journal of Thermal Science and Technology},
  year = 2007,
}

@article{CTT100534325,
  author = {Yihua Gu and Isao Satoh and Takushi Saito and Tatsuya Kawaguchi},
  title = {Heat Transfer in Segregated Fluidized Beds Part 2: Particle Motion and Its Effects on the Heat transfer in the Segregated Fluidized Beds},
  journal = {Journal of Thermal Science and Technology},
  year = 2007,
}

@article{CTT100521718,
  author = {Tatsuya Kawaguchi and Isao Satoh and Takushi Saito},
  title = {Surface temperature monitoring of convex molten polymer using interferometric tomography with direct cylindrical reconstruction : Measurement Science and Technology},
  journal = {Measurement Science and Technology},
  year = 2006,
}

@article{CTT100396958,
  author = {Takushi Saito and Isao Satoh},
  title = {Thermal Strategy for the Separation of a Polymer Mixture},
  journal = {Polymer Engineering and Science},
  year = 2005,
}

@article{CTT100395635,
  author = {佐藤公俊 and 斉藤卓志 and 黒崎晏夫},
  title = {半導体レーザーによる多自由度プラスチック溶着},
  journal = {電気学会論文集C編},
  year = 2005,
}

@article{CTT100395941,
  author = {Hiroshi Ito and Yusuke Yagisawa and Takushi Saito and Toshiyuki Yasuhara and Takeshi Kikutani and Yoshitoshi Yamagiwa},
  title = {Fundamental Study on Structure Development of Thin-wall Injection Molded Products},
  journal = {Theoretical and Applied Mechanics Japan},
  year = 2005,
}

@article{CTT100504889,
  author = {岡田祐一 and 大岡健一 and 斉藤卓志 and 佐藤勲 and 東川芳晃},
  title = {PP射出成形品に生じる曇りフローマークの発現機構と材料物性II},
  journal = {成形加工'04},
  year = 2004,
}

@article{CTT100504884,
  author = {石川智隆 and 斉藤卓志 and 佐藤勲},
  title = {高出力赤外線レーザによる材料表面の自由変形微細加工},
  journal = {成形加工'04},
  year = 2004,
}

@article{CTT100504883,
  author = {島一元 and 佐藤勲 and 斉藤卓志},
  title = {熱融着現象を利用した高分子材料の分別手法-実現可能性の検討-},
  journal = {第41回日本伝熱シンポジウム講演論文集},
  year = 2004,
}

@article{CTT100504766,
  author = {斉藤卓志 and 佐藤勲 and 東川芳晃},
  title = {Study on Flow-mark Generation Mechanism of Injection Molded Talc Filled Polypropylene Plates},
  journal = {Proceedings of Asian Workshop on Plastic Processing},
  year = 2004,
}

@article{CTT100504762,
  author = {Isao Satoh and Takushi Saito and Kazumoto Shima},
  title = {Performance of the Cold Transport System Utilizing Evaporation-Freezing Phenomena with a Cold Trap},
  journal = {Int. J. of Refrigeration},
  year = 2004,
}

@article{CTT100504761,
  author = {Yihua Gu and Isao Satoh and Takushi Saito},
  title = {Heat Transfer in Fluidized Bed with Particle Mixture},
  journal = {Proc. 1st Int. Forum on Heat Transfer},
  year = 2004,
}

@article{CTT100504760,
  author = {宮部実 and 斉藤卓志 and 佐藤勲},
  title = {フォトクロミックダイを用いた吸収係数制御による微細加熱手法の提案},
  journal = {成形加工シンポジア'04},
  year = 2004,
}

@article{CTT100504891,
  author = {石見浩之 and 福岡正義 and 濱田泰以 and 斉藤卓志},
  title = {充填樹脂両サイド面の冷却挙動とULPAC型機能発現との関連性について},
  journal = {成形加工シンポジア'04},
  year = 2004,
}

@article{CTT100504758,
  author = {安原鋭幸 and 相原広志 and 伊藤浩志 and 斉藤卓志 and 榎本和城 and 大竹尚登},
  title = {カーボンナノファイバー含有射出成形品の機械的特性-薄肉化による効果-},
  journal = {成形加工シンポジア'04},
  year = 2004,
}

@article{CTT100504759,
  author = {伊藤浩志 and 斉藤卓志 and 安原鋭幸 and 鞠谷雄士 and 山極佳年 and 室井一男},
  title = {インテリジェントマイクロポリマー成形システムによる材料特性および成形性の評価},
  journal = {成形加工シンポジア'04},
  year = 2004,
}

@article{CTT100504892,
  author = {伊藤浩志 and 八木沢勇介 and 斉藤卓志 and 安原鋭幸 and 鞠谷雄士 and 山極佳年},
  title = {超薄肉射出成形品の構造形成に関する基礎的検討},
  journal = {成形加工シンポジア'04},
  year = 2004,
}

@article{CTT100504893,
  author = {斉藤卓志 and 井手慎之助 and 伊藤浩志 and 安原鋭幸 and 佐藤勲 and 山極佳年},
  title = {超薄肉射出成形品における対向ウェルドに関する基礎的研究},
  journal = {成形加工シンポジア'04},
  year = 2004,
}

@article{CTT100487806,
  author = {高田淳史 and 佐藤勲 and 斉藤卓志},
  title = {カーボンブラック添加された導電性シートの電気抵抗変化に関する基礎的研究},
  journal = {成形加工'03},
  year = 2003,
}

@article{CTT100487807,
  author = {保永研壱 and 斉藤卓志 and 佐藤勲 and 東川芳晃},
  title = {PP射出成形品に生じる曇りフローマークの発現機構と材料物性の関係},
  journal = {成形加工'03},
  year = 2003,
}

@article{CTT100487808,
  author = {宮部実 and 佐藤勲 and 斉藤卓志 and 東川芳晃},
  title = {フローマーク発生時における樹脂流動先端速度変動の可視化計測},
  journal = {成形加工'03},
  year = 2003,
}

@article{CTT100487809,
  author = {斉藤卓志},
  title = {温度計測と伝熱制御技術－型内流動から成形材料まで－},
  journal = {プラスチック成形加工学会第73回講演会要旨集},
  year = 2003,
}

@article{CTT100487802,
  author = {Takushi Saito and Isao Satoh},
  title = {A Study on Thermal Adhesion of Polymer Materials and Its Application for a Material Selection Process},
  journal = {Proceedings of the 6th ASME-JSME Thermal Engineering Joint Conference},
  year = 2003,
}

@article{CTT100487803,
  author = {島一元 and 佐藤勲 and 斉藤卓志},
  title = {コールドトラップと蒸発凍結現象を利用したLNG廃冷熱輸送システムの輸送効率評価},
  journal = {第40回日本伝熱シンポジウム講演論文集},
  year = 2003,
}

@article{CTT100487804,
  author = {佐藤公俊 and 斉藤卓志 and 黒崎晏夫},
  title = {赤外線吸収色素を用いた透明樹脂材のレーザー接合},
  journal = {第40回日本伝熱シンポジウム講演論文集},
  year = 2003,
}

@article{CTT100487805,
  author = {森由紀 and 佐藤勲 and 斉藤卓志},
  title = {熱可塑性プラスチックの熱融着挙動に与える材料物性の影響},
  journal = {成形加工'03},
  year = 2003,
}

@article{CTT100470523,
  author = {杉本竜一 and 佐藤公俊 and 斉藤卓志 and 黒崎晏夫},
  title = {赤外線照射支援による射出成形時ゲート圧力損失の低減},
  journal = {成形加工'02},
  year = 2002,
}

@article{CTT100487801,
  author = {Takushi Saito and Isao Satoh and Yasuo Kurosaki},
  title = {A New Concept of Active Temperature Control for an Injection Molding Process Using Infrared Radiation Heating},
  journal = {Polymer Engineering and Science},
  year = 2002,
}

@article{CTT100477551,
  author = {溝口真知子 and 仙波健 and 斉藤卓志 and 増渕雄一 and 伊藤浩志 and 仲井朝美},
  title = {ペレットの熱溶解挙動に関する研究 第一報：ペレット内部の結晶化度分布},
  journal = {成形加工シンポジア'02},
  year = 2002,
}

@article{CTT100477550,
  author = {保永研壱 and 斉藤卓志 and 佐藤勲 and 東川芳晃},
  title = {PP射出成形品における曇りフローマークの発現機構に関する基礎的研究},
  journal = {成形加工シンポジア'02},
  year = 2002,
}

@article{CTT100477549,
  author = {高木良 and 佐藤勲 and 斉藤卓志},
  title = {射出成形品上に生じるウェルドラインの構造と強度に与える熱的射出条件の影響},
  journal = {成形加工シンポジア'02},
  year = 2002,
}

@article{CTT100477548,
  author = {斉藤卓志 and 佐藤勲},
  title = {炭酸ガスレーザによる薄板ガラス板表面形状制御},
  journal = {2002年日本機械学会熱工学講演会講演論文集},
  year = 2002,
}

@article{CTT100477547,
  author = {佐藤公俊 and 大橋隆弘 and 斉藤卓志 and 黒崎晏夫},
  title = {精密プラスチック部品の高効率成形性改善技術の開発},
  journal = {2002年日本機械学会熱工学講演会講演論文集},
  year = 2002,
}

@article{CTT100477546,
  author = {Kimitoshi Sato and Takushi Saito and Isao Satoh and Yasuo Kurosaki},
  title = {Heat Transfer in Laser Transmission Welding of Thermoplastics using Functional Pigment},
  journal = {CD-ROM Proceedings of 12th International Heat Transfer Conference},
  year = 2002,
}

@article{CTT100470714,
  author = {Takushi Saito and Isao Satoh},
  title = {Gas Bubble Shape Change in Gas Assisted Injection Molding using Heat Transfer Control},
  journal = {Proceedings of Asian Workshop on Polymer Processing in Singapore 2002},
  year = 2002,
}

@article{CTT100470713,
  author = {松田義信 and 佐藤勲 and 斉藤卓志},
  title = {LNG廃冷熱輸送システムの性能に与えるコールドトラップへの着霜の影響},
  journal = {第39回日本伝熱シンポジウム講演論文集},
  year = 2002,
}

@article{CTT100470712,
  author = {Takushi Saito and Christopher W. Macosko},
  title = {Interfacial Crosslinking and Diffusion via Extensional Rheometry},
  journal = {Polymer Engineering and Science},
  year = 2002,
}

@article{CTT100470711,
  author = {Kimitoshi Sato and Yasuo Kurosaki and Takushi Saito and Isao Satoh},
  title = {Laser welding of plastics transparent to near-infrared radiation},
  journal = {SPIE International Conference; Photonics West 2002, Photon Processing in Microelectronics and Photonics},
  year = 2002,
}

@article{CTT100470524,
  author = {満岡隆昭 and 佐藤勲 and 斉藤卓志},
  title = {インサート成形における樹脂／インサート材の密着状態の熱工学的検討},
  journal = {成形加工'02},
  year = 2002,
}

@article{CTT100470522,
  author = {Kimitoshi Sato and Takushi Saito and Yasuo Kurosaki},
  title = {Efficient Process to Prevent Warpage of Polymeric Products Assisted by Near-infrared Radiation},
  journal = {Thermal Science & Engineering},
  year = 2002,
}

@article{CTT100470521,
  author = {Kimitoshi Sato and Takushi Saito and Yasuo Kurosaki},
  title = {Diode-laser Welding of Transparent Plastics},
  journal = {CD-ROM Proceedings of Polymer Processing Society 18th Annual Meeting},
  year = 2002,
}

@article{CTT100470520,
  author = {Takushi Saito and Isao Satoh},
  title = {Rapid Mold Heating Technique using Heat of Compressed Gas},
  journal = {CD-ROM Proceedings of Polymer Processing Society 18th Annual Meeting},
  year = 2002,
}

@article{CTT100454748,
  author = {宮田祐一郎 and 佐藤公俊 and 黒崎晏夫 and 斉藤卓志},
  title = {半導体レーザによる着色熱可塑性樹脂オーバーラップ接合},
  journal = {成形加工シンポジア'01},
  year = 2001,
}

@article{CTT100454746,
  author = {Yasuo Kurosaki and Kimitoshi Sato and Isao Satoh and Takushi Saito},
  title = {Precision Polymer Molding Assisted by Infrared Laser Irradiation},
  journal = {Proceedings of the Third International Symposium on Radiation Transfer},
  year = 2001,
}

@article{CTT100454744,
  author = {齊藤卓志},
  title = {レーザを用いたプラスチック成形加工現象解析と構造制御},
  journal = {第50回高分子学会予稿集},
  year = 2001,
}

@article{CTT100454743,
  author = {佐藤勲 and 斉藤卓志 and 佐藤哲隆},
  title = {ガスの断熱圧縮を利用した金型急速加熱手法の提案},
  journal = {成形加工'01},
  year = 2001,
}

@article{CTT100454722,
  author = {丸岡裕明 and 佐藤勲 and 斉藤卓志},
  title = {赤外ふく射加熱によるブレンドモルフォロジーの能動制御},
  journal = {成形加工'01},
  year = 2001,
}

@article{CTT100454721,
  author = {鳥村真 and 佐藤勲 and 斉藤卓志},
  title = {表面形状・温度分布の同時計測によるフローマーク発現状況解析},
  journal = {成形加工'01},
  year = 2001,
}

@article{CTT100454720,
  author = {森由紀 and 佐藤勲 and 斉藤卓志},
  title = {非定常熱伝導を利用した廃プラスチック分別手法の分別能},
  journal = {成形加工'01},
  year = 2001,
}

@article{CTT100454718,
  author = {板本新平 and 佐藤勲 and 斉藤卓志},
  title = {凍結促進剤を混入した水の蒸発凍結挙動},
  journal = {第38回日本伝熱シンポジウム講演論文集 Vol. 3},
  year = 2001,
}

@article{CTT100454717,
  author = {杉山徹 and 佐藤勲 and 斉藤卓志},
  title = {非定常熱伝導と融着現象を利用した廃プラスチックの分別回収－融着界面温度の測定－},
  journal = {第38回日本伝熱シンポジウム講演論文集 Vol. 2},
  year = 2001,
}

@article{CTT100454716,
  author = {繁友良太 and 佐藤公俊 and 又吉智也 and 黒崎晏夫 and 斉藤卓志},
  title = {赤外線照射支援による超精密転写成形（直接および間接ふく射加熱の転写性への影響）},
  journal = {第38回日本伝熱シンポジウム講演論文集},
  year = 2001,
}

@article{CTT100454714,
  author = {長浜謙太 and 佐藤勲 and 斉藤卓志},
  title = {真空乾燥・吸着発熱を利用したLNG廃冷熱からの温熱生成システム},
  journal = {第38回日本伝熱シンポジウム講演論文集},
  year = 2001,
}

@article{CTT100470710,
  author = {佐藤公俊 and 黒崎晏夫 and 斉藤卓志},
  title = {赤外線照射支援による二工程式超精密射出成形法の開発},
  journal = {成形加工},
  year = 2001,
}

@article{CTT100454750,
  author = {斉藤卓志 and 高木良 and 佐藤勲},
  title = {ウェルドラインまわりのプラスチック流動に対する射出条件の影響},
  journal = {成形加工シンポジア'01},
  year = 2001,
}

@article{CTT100454713,
  author = {薗部昌功 and 斉藤卓志 and 佐藤勲},
  title = {蒸発凍結を利用した冷熱輸送貯蔵システム},
  journal = {第38回日本伝熱シンポジウム講演論文集},
  year = 2001,
}

@article{CTT100454749,
  author = {斉藤卓志 and 佐藤勲},
  title = {ガスの圧縮による昇温を利用した金型表面加熱手法の検討},
  journal = {成形加工シンポジア'01},
  year = 2001,
}

@article{CTT100454747,
  author = {Takushi Saito and Isao Satoh},
  title = {A New Control Technic for Polymer Blend Morphology using Radiation Heating},
  journal = {Proceedings of the Third International Symposium on Radiation Transfer},
  year = 2001,
}

@article{CTT100454719,
  author = {斉藤卓志 and 斎藤純也 and 佐藤勲},
  title = {伝熱学的手法を用いたガスアシスト成形におけるガス流路形状の能動的制御},
  journal = {成形加工},
  year = 2001,
}

@article{CTT100454745,
  author = {齊藤卓志},
  title = {研究総覧～計測技術～},
  journal = {成形加工},
  year = 2001,
}

@article{CTT100435855,
  author = {斉藤卓志 and 佐藤勲 and 上杉憲治 and 半田浩一},
  title = {射出成形品の邪魔ピンまわりに生じるウェルドの発現機構に関する研究－充填流動および温度分布の可視化－},
  journal = {成形加工},
  year = 2000,
}

@article{CTT100435854,
  author = {鳥村真 and 斉藤卓志 and 佐藤勲},
  title = {レーザ干渉光を利用した射出成形品のフローマーク発現状況の実時間計測},
  journal = {成形加工'00},
  year = 2000,
}

@article{CTT100435853,
  author = {上藤陽一 and 斉藤卓志 and 佐藤勲},
  title = {干渉ふく射加熱による高分子シートの分子配向微細制御},
  journal = {成形加工'00},
  year = 2000,
}

@article{CTT100437585,
  author = {斉藤卓志 and 佐藤勲 and 岩田正孝},
  title = {熱融着現象を利用した廃プラスチック分別手法の基礎的研究},
  journal = {成形加工シンポジア'00},
  year = 2000,
}

@article{CTT100437584,
  author = {北川健太郎 and 杉本竜一 and 黒崎晏夫 and 佐藤公俊 and 斉藤卓志},
  title = {赤外線照射支援射出成形による薄肉成形および転写性の向上},
  journal = {成形加工シンポジア'00},
  year = 2000,
}

@article{CTT100437583,
  author = {佐藤勲 and 斉藤卓志 and 岩田正孝},
  title = {非定常熱伝導を利用した廃プラスチック分別手法の提案},
  journal = {成形加工シンポジア'00},
  year = 2000,
}

@article{CTT100437582,
  author = {Takushi Saito and Isao Satoh and Yasuo Kurosaki},
  title = {Quantitative Visualization on Time-dependent Surface Profile of Polymer Injection Molding using He-Ne Laser Interference},
  journal = {CD-ROM Proceedings of 9th. International symposium on flow visualization},
  year = 2000,
}

@article{CTT100437581,
  author = {斉藤卓志},
  title = {研究総覧－計測技術－},
  journal = {成形加工},
  year = 2000,
}

@article{CTT100435852,
  author = {斉藤卓志 and 佐藤勲},
  title = {プラスチック射出成形品のウェルドライン部における温度履歴の可視化},
  journal = {第37回日本伝熱シンポジウム講演論文集},
  year = 2000,
}

@article{CTT100435851,
  author = {黒崎晏夫 and 佐藤公俊 and 繁友良太 and 斉藤卓志},
  title = {赤外線照射支援による超精密転写成形（第一報：二工程成形による表面情報の転写性の向上）},
  journal = {第37回日本伝熱シンポジウム講演論文集},
  year = 2000,
}

@article{CTT100435850,
  author = {竹村賢二 and 斉藤卓志 and 佐藤勲},
  title = {食品加工時の伝熱現象の把握－パン焼成時の熱移動と水分移動－},
  journal = {第37回日本伝熱シンポジウム講演論文集},
  year = 2000,
}

@article{CTT100425428,
  author = {竹下貴雄 and 佐藤公俊 and 黒崎晏夫 and 斉藤卓志},
  title = {近赤外線による薄物射出成形},
  journal = {成形加工シンポジア'99},
  year = 1999,
}

@article{CTT100435849,
  author = {斉藤卓志 and 佐藤勲 and 黒崎晏夫},
  title = {レーザ干渉を利用した射出成形品表面のレコード溝状フローマークの発現プロセスの解明},
  journal = {成形加工},
  year = 1999,
}

@article{CTT100425437,
  author = {Takushi Saito and Hideki Takayanagi and Isao Satoh},
  title = {Formation of the Pattern-like Birefringence Distribution on the Injection Molded Strips by CO2 Laser Interference},
  journal = {Proceeding of the 6th Japan International SAMPE Symposium},
  year = 1999,
}

@article{CTT100425427,
  author = {斉藤卓志 and 佐藤勲},
  title = {赤外ふく射加熱を用いたブレンド材料のモルフォロジ改善},
  journal = {成形加工'99},
  year = 1999,
}

@article{CTT100425426,
  author = {後藤健一郎 and 斉藤卓志 and 佐藤勲},
  title = {射出成形品上に生じるレコード溝状フローマークの発現状況のレーザ計測},
  journal = {成形加工'99},
  year = 1999,
}

@article{CTT100425425,
  author = {斉藤卓志 and 佐藤勲},
  title = {赤外線カメラを用いた射出成形品のウェルド部における温度分布の可視化},
  journal = {成形加工'99},
  year = 1999,
}

@article{CTT100425424,
  author = {斉藤卓志 and 佐藤勲},
  title = {赤外ふく射加熱によるブレンド高分子材料のモルフォロジ改善},
  journal = {第36回日本伝熱シンポジウム講演論文集},
  year = 1999,
}

@article{CTT100425407,
  author = {高柳秀樹 and 斉藤卓志 and 佐藤勲},
  title = {炭酸ガスレーザ光の干渉による樹脂射出成形品の表面物性の微細制御},
  journal = {第36回日本伝熱シンポジウム講演論文集},
  year = 1999,
}

@article{CTT100425406,
  author = {Takushi Saito and Hideki Takayanagi and Isao Satoh},
  title = {A New Optical Property Control Method for the Injection Molded Polymer Products by CO2 Laser Interference Heating},
  journal = {CD-ROM Proceedings of Polymer Processing Society 15th Annual Meeting},
  year = 1999,
}

@article{CTT100425405,
  author = {Takushi Saito and Isao Satoh and Kenji Uesugi and Kouichi Handa},
  title = {Visualization of Polymer Melt Flow around an Obstructive Pin during the Injection Molding Process},
  journal = {CD-ROM Proceedings of the 2nd Pacific Symposium on Flow Visualization and Image Processing},
  year = 1999,
}

@article{CTT100425402,
  author = {斉藤卓志},
  title = {射出成形における計測技術－可視化・熱測定について－},
  journal = {プラスチック成形加工学会第43回講演会要旨集},
  year = 1999,
}

@article{CTT100425401,
  author = {Takushi Saito and Isao Satoh and Yasuo Kurosaki},
  title = {An Application of CO2 Laser Interference Heating for Polymer Injection Molding Process},
  journal = {CD-ROM Proceedings of the 5th ASME/JSME Thermal Engineering Conference},
  year = 1999,
}

@article{CTT100425379,
  author = {斉藤卓志 and 佐藤勲 and 黒崎晏夫},
  title = {赤外ふく射加熱支援による薄肉射出成形品の充填性の改善},
  journal = {成形加工},
  year = 1999,
}

@article{CTT100424541,
  author = {Takushi Saito and Isao Satoh},
  title = {Morphology Improvement Technique for the Immiscible Polymer Blend with Infrared Radiation Heating},
  journal = {Proceeding of the 6th Japan International SAMPE Symposium},
  year = 1999,
}

@article{CTT100424540,
  author = {斎藤純也 and 斉藤卓志 and 佐藤勲},
  title = {伝熱的手法によるガスアシスト射出成形品のガス進展挙動の能動的制御},
  journal = {成形加工シンポジア'99},
  year = 1999,
}

@article{CTT100437541,
  author = {佐藤　勲 and 斉藤卓志 and 高柳秀樹},
  title = {赤外線レーザーの干渉照射を用いた射出成形品表面の分子配向層のパターン状制御に関する実験的検討},
  journal = {成形加工シンポジア'98},
  year = 1998,
}

@article{CTT100437542,
  author = {斉藤卓志 and Christopher W. Macosko},
  title = {伸張条件下における反応系マルチレイヤー材料の界面付加反応},
  journal = {第10回高分子加工技術討論会講演要旨集},
  year = 1998,
}

@article{CTT100437540,
  author = {斉藤卓志 and 佐藤　勲},
  title = {射出成形品におけるウェルドライン形成の実時間観察と内部残留応力の可視化},
  journal = {成形加工シンポジア'98},
  year = 1998,
}

@article{CTT100437539,
  author = {Takushi Saito and Christopher W. Macosko},
  title = {Interfacial Reaction versus Area Generation Rate via Extensional Rheometry},
  journal = {Proceedings of International Microsymposium on Elongational Flow of Polymeric Systems},
  year = 1998,
}

@article{CTT100437536,
  author = {Yasuo Kurosaki and Isao Satoh and Takushi Saito},
  title = {A Precision Polymer Injection Molding Process Assisted by Infrared Irradiation},
  journal = {Conference-Preprint in Plastics in Telecommunications VIII},
  year = 1998,
}

@article{CTT100437537,
  author = {Takushi Saito and Christopher W. Macosko},
  title = {Interfacial Reaction versus Area Generation Rate via Extensional Rheometry},
  journal = {Conference Proceedings of ANTEC'98},
  year = 1998,
}

@article{CTT100437538,
  author = {Takushi Saito and Christopher W. Macosko},
  title = {A Study of Interfacial Effect in Polymer Blends under Shear and Extensional Flow},
  journal = {Extended Abstracts of the 14th Annual Meeting of the Polymer Processing Society},
  year = 1998,
}

@article{CTT100437535,
  author = {佐藤勲 and 黒崎晏夫 and 斉藤卓志 and 稲生一志},
  title = {レーザー光の可干渉性を利用した射出成形品表層部の分子配向層のパターン状制御},
  journal = {成形加工'97},
  year = 1997,
}

@article{CTT100418894,
  author = {Yasuo Kurosaki and Isao Satoh and Takushi Saito},
  title = {Injection-molding Process for High-presision Polymer Products Utilizing CO2 Laser Irradiation},
  journal = {International Centre for Heat and Mass Transfer, International Symposium on Molecular and Microscale Heat Transfer in Materials Processing and Other Applications},
  year = 1997,
}

@article{CTT100418893,
  author = {斉藤卓志 and 黒崎晏夫 and 佐藤勲},
  title = {赤外ふく射支援による精密射出成形法に関する研究 (第2報,計算機シミュレーションによる樹脂内および金型内温度分布の予測)},
  journal = {日本機械学会論文集(B編)},
  year = 1997,
}

@article{CTT100439398,
  author = {斉藤卓志 and 黒崎晏夫 and 佐藤勲},
  title = {高分子射出成形における赤外線照射を利用した残留分子配向の低減と流動性の改善},
  journal = {第45回応用力学連合講演会講演予稿集},
  year = 1996,
}

@article{CTT100437532,
  author = {黒崎晏夫 and 佐藤　勲 and 斉藤卓志 and 藤元隆},
  title = {ガスアシスト成形におけるガス挙動の可視化と成形品品位の向上に対する実験的検討},
  journal = {成形加工シンポジア'96},
  year = 1996,
}

@article{CTT100437533,
  author = {斉藤卓志 and 黒崎晏夫 and 佐藤勲 and 柴田良平},
  title = {ふく射加熱を用いた薄板あるいは微細形状を有する成形品の成形},
  journal = {成形加工'96},
  year = 1996,
}

@article{CTT100437534,
  author = {Takushi Saito and Yasuo Kurosaki and Isao Satoh},
  title = {Improvement of Polymer Behavior during the Filling Process of Injection Molding by Thermal Irradiation},
  journal = {Proceedings of 12th Annual Meeting of the Polymer Processing Society},
  year = 1996,
}

@article{CTT100418892,
  author = {黒崎晏夫 and 佐藤勲 and 斉藤卓志},
  title = {赤外ふく射支援による精密射出成形法に関する研究 (第1報，炭酸ガスレーザ照射を利用した新射出成形法による樹脂成形品の高品位化)},
  journal = {日本機械学会論文集(C編)},
  year = 1996,
}

@article{CTT100418895,
  author = {黒崎晏夫 and 佐藤勲 and 斉藤卓志},
  title = {射出成形品のひけ発生位置に対する固化層の発達状況と樹脂-金型間の粘着性の影響},
  journal = {成形加工},
  year = 1996,
}

@article{CTT100437528,
  author = {Yasuo Kurosaki and Isao Satoh and Takushi Saito},
  title = {An Advanced Injection Molding Process Assisted by Radiative Heating to Reduce Molecular Orientation and to Improve the Transcribability of the Molded Surface},
  journal = {Proceedings of the Symposium on Thermal Science and Engineering in Honor of Chancellor Chang-Lin Tien},
  year = 1995,
}

@article{CTT100437529,
  author = {黒崎晏夫 and 佐藤　勲 and 斉藤卓志},
  title = {CO2レーザ加熱を利用した高分子射出成形品の高品位化},
  journal = {第32回日本伝熱シンポジウム講演論文集},
  year = 1995,
}

@article{CTT100437530,
  author = {黒崎晏夫 and 佐藤　勲 and 斉藤卓志 and 柴田良平},
  title = {ふく射加熱を用いた薄板射出成形品の成形限界の改善},
  journal = {成形加工シンポジア'95},
  year = 1995,
}

@article{CTT100437531,
  author = {斉藤卓志 and 黒崎晏夫 and 佐藤　勲},
  title = {金型内樹脂のふく射加熱による高品位射出成形手法の研究},
  journal = {第4回ポリマー材料フォーラム講演予稿集},
  year = 1995,
}

@article{CTT100437526,
  author = {Yasuo KUROSAKI and Isao SATOH and Takushi SAITO},
  title = {Location of Sink-Marks on the Surface of Injection-Molded Polymer Strips Controlled by the Heat Transfer within the Molded},
  journal = {Proceedings of ASME/JSME Thermal Engineering Joint Conference},
  year = 1995,
}

@article{CTT100437527,
  author = {Yasuo KUROSAKI and Isao SATOH and Takushi SAITO},
  title = {Reduction of Birefringence in a Skin-Layer of Injection Molded Polymer Strips Using CO2 Laser Irradiation},
  journal = {Proceedings of 30th National Heat Transfer Conference},
  year = 1995,
}

@article{CTT100437524,
  author = {黒崎晏夫 and 佐藤　勲 and 斉藤卓志},
  title = {射出成形品のひけ発生位置に対する固化層の発達状況と樹脂－金型壁の接着性の影響},
  journal = {成形加工'94},
  year = 1994,
}

@article{CTT100437525,
  author = {黒崎晏夫 and 佐藤　勲 and 斉藤卓志},
  title = {炭酸ガスレーザを用いた直接加熱による射出成形品表層部の流動配向の緩和とその可視化},
  journal = {成形加工シンポジア'94},
  year = 1994,
}

@article{CTT100437523,
  author = {黒崎晏夫 and 佐藤　勲 and 斉藤卓志},
  title = {伝熱制御による高分子射出成形品の高品位化（ひけ発生位置の制御）},
  journal = {日本機械学会講演論文集 Vol. 2},
  year = 1993,
}

@article{CTT100437522,
  author = {黒崎晏夫 and 佐藤　勲 and 斉藤卓志},
  title = {リブを有する射出成形平板のひけ発生過程の可視化（金型壁温分布とひけ発生プロセスの関連）},
  journal = {成形加工'93},
  year = 1993,
}

@article{CTT100437518,
  author = {黒崎晏夫 and 佐藤　勲 and 斉藤卓志},
  title = {非均一に冷却された金型を用いて成形された射出成形品のひけ発生位置に対する保圧力の影響},
  journal = {成形加工'92},
  year = 1992,
}

@inproceedings{CTT100907586,
  author = {Takushi Saito and Yinfeng Xia and Tatsuya Kawaguchi},
  title = {Measurement of interfcial thermal resistance of layered heterogeneous polymers obtained by rotating parallel discs},
  booktitle = {Conference Abstracts},
  year = 2023,
}

@inproceedings{CTT100907585,
  author = {戸谷公紀 and 赤石直也 and 鷹見凌 and 紺野将光 and 中村博昭 and 山本晋聡 and 田代裕樹 and 東信也 and 齊藤卓志},
  title = {背景型シュリーレン法による射出成形部品のインライン屈折率分布測定},
  booktitle = {成形加工シンポジア'23予稿集},
  year = 2023,
}

@inproceedings{CTT100903154,
  author = {Yinfeng Xia and Tatsuya Kawaguchi and Takushi Saito},
  title = {Stirring Method of Multi-Layer Polymer for Interfacial Heat Resistance Measurement},
  booktitle = {Proceedings of the 33rd International Symposium on Transport Phenomena},
  year = 2023,
}

@inproceedings{CTT100903153,
  author = {川口達也 and 宮竜太朗 and 齊藤卓志},
  title = {LightField 画像を用いた高速な深度推定機械学習モデルの構築},
  booktitle = {第51回可視化情報シンポジウム講演論文集},
  year = 2023,
}

@inproceedings{CTT100899534,
  author = {鈴木孝典 and 東孝佑 and 川口達也 and 齊藤卓志},
  title = {高粘度流体の分配挙動に与えるレオロジー特性の影響},
  booktitle = {第34回プラスチック成形加工学会予稿集},
  year = 2023,
}

@inproceedings{CTT100903152,
  author = {Ryutaro Miya and Takushi Saito and Tatsuya Kawaguchi},
  title = {Real-time depth estimation machine learning model for Light Field raw images},
  booktitle = {Proceedings of the 17th Asian Symposium on Visualization},
  year = 2023,
}

@inproceedings{CTT100892729,
  author = {Evan Philander Suryawijaya and Tatsuya Kawaguchi and Takushi Saito},
  title = {Theoretical Dropwise Condensation Heat Transfer Analysis of Polymer Infused Porous Sintered Copper Nanoparticle},
  booktitle = {Abstracts of ICBCHT11},
  year = 2023,
}

@inproceedings{CTT100892744,
  author = {宮竜太朗 and 川口達也 and 齊藤卓志},
  title = {ライトフィールド画像を用いたリアルタイム深度推定機械学習モデルの構築},
  booktitle = {第60回日本伝熱シンポジウム講演論文集},
  year = 2023,
}

@inproceedings{CTT100892742,
  author = {川島拓真 and 川口達也 and 齊藤卓志},
  title = {逆非平衡分子動力学法による異種高分子材料界面近傍の熱抵抗分布解析},
  booktitle = {第60回日本伝熱シンポジウム講演論文集},
  year = 2023,
}

@inproceedings{CTT100890886,
  author = {川島拓真 and 川口達也 and 齊藤卓志},
  title = {RNEMDを用いた異種高分子材料界面における伝熱特性の考察},
  booktitle = {成形加工シンポジア'22講演予稿集},
  year = 2022,
}

@inproceedings{CTT100882610,
  author = {Takushi Saito and Takuma Kawashima and Tatsuya Kawaguchi},
  title = {Analysis of heat transfer at polymer interface by molecular dynamics simulation},
  booktitle = {Abstract book of AWPP2022},
  year = 2022,
}

@inproceedings{CTT100878574,
  author = {松下裕也 and 東孝祐 and 川口達也 and 齊藤卓志},
  title = {流体のレオロジー特性が混合進展に与える影響の可視化解析},
  booktitle = {第33回プラスチック成形加工学会年次大会予稿集（オンライン）},
  year = 2022,
}

@inproceedings{CTT100878573,
  author = {佐山聡 and 戸谷公紀 and 齊藤卓志},
  title = {背景型シュリーレン法による射出成形部品の屈折率分布計測},
  booktitle = {第33回プラスチック成形加工学会年次大会講演論文集（オンライン）},
  year = 2022,
}

@inproceedings{CTT100878572,
  author = {松本康佑 and 川口達也 and 齊藤卓志},
  title = {伝熱面上に形成された銅ナノ粒子層の構造制御による沸騰熱伝達性能の変化},
  booktitle = {第59回日本伝熱シンポジウム講演論文集（電子版）},
  year = 2022,
}

@inproceedings{CTT100878568,
  author = {Takuma Kawashima and Takushi Saito and Tatsuya Kawaguchi},
  title = {Basic study of thermal conductivity estimation of polymer material by RNEMD},
  booktitle = {Abstracts of PPS-37},
  year = 2022,
}

@inproceedings{CTT100878571,
  author = {Hao Cong and Seung Joon Lee and Kosuke Higashi and Tatsuya Kawaguchi and Takushi Saito},
  title = {Measurement of temperature distribution in mixing viscous fluid using thermochromic liquid crystals},
  booktitle = {Abstracts of PPS-37},
  year = 2022,
}

@inproceedings{CTT100863952,
  author = {Yuki TANO and Tatsuya KAWAGUCHI and Takushi SAITO},
  title = {Experimental Studies on the Taylor-Couette Flow of Shear-thinning Fluids},
  booktitle = {Proceedings of GEOMATE 2021},
  year = 2021,
}

@inproceedings{CTT100862403,
  author = {Yusuke Uetsuki and Tatsuya Kawaguchi and Takushi Saito},
  title = {Evaporation mass flux measurement from solvent surface by Mach-Zehnder interferometer},
  booktitle = {},
  year = 2021,
}

@inproceedings{CTT100862402,
  author = {Kiminori Toya and Satoshi Sayama and Takushi Saito},
  title = {Refractive index distribution measurement of injection molded polymer components by background-oriented schlieren method},
  booktitle = {Extended abstract of ACTS2021},
  year = 2021,
}

@inproceedings{CTT100862404,
  author = {Gea Fardias Mu'min and Tatsuya Kawaguchi and Takushi Saito},
  title = {Droplet deformation and breakup of an immiscible model fluid system by radiation heat using infrared laser},
  booktitle = {Extended abstracts of ACTS2021},
  year = 2021,
}

@inproceedings{CTT100863953,
  author = {田野 裕樹 and 川口 達也 and 齊藤 卓志},
  title = {回転二重円筒内における非ニュートン流体の流動場の可視化},
  booktitle = {},
  year = 2021,
}

@inproceedings{CTT100861511,
  author = {戸谷 公紀 and 佐山 聡 and 齊藤 卓志},
  title = {背景型シュリーレン法による射出成形部品の屈折率分布計測},
  booktitle = {2021年度年次大会予稿集},
  year = 2021,
}

@inproceedings{CTT100853569,
  author = {SeungJoon LEE and 東孝祐 and 川口達也 and 齊藤卓志},
  title = {感温液晶カプセルを用いた非充満混合における熱拡散状況の解析},
  booktitle = {成形加工'21},
  year = 2021,
}

@inproceedings{CTT100853574,
  author = {森崎裕樹 and 田中稔 and 竹内聡 and 新間敦 and 田中宏一 and 岡部沙也佳 and 篠田卓也 and 川口達也 and 齊藤卓志},
  title = {結晶融解潜熱測定による射出成形PPS平板の板厚さ方向における冷却速度推定},
  booktitle = {成形加工'21},
  year = 2021,
}

@inproceedings{CTT100853571,
  author = {高橋麗男 and 川口達也 and 齊藤卓志},
  title = {高速度カメラを用いた超音波加振される非晶性高分子材料の可塑化挙動解析},
  booktitle = {成形加工'21},
  year = 2021,
}

@inproceedings{CTT100853570,
  author = {田口丈哲 and 樋口陸斗 and 川口達也 and 齊藤卓志},
  title = {異種高分子材料の界面における熱抵抗に関する研究},
  booktitle = {成形加工'21},
  year = 2021,
}

@inproceedings{CTT100853568,
  author = {村本暢広 and 川口達也 and 齊藤卓志},
  title = {銅ナノ粒子多孔質層内における液水浸透挙動と内部構造の関係},
  booktitle = {第58回日本伝熱シンポジウム講演論文集},
  year = 2021,
}

@inproceedings{CTT100846514,
  author = {齊藤卓志 and 船橋大輝 and 川口達也 and 佐藤勲},
  title = {超音波加振による樹脂可塑化に対する実験的考察},
  booktitle = {成形加工シンポジア'20},
  year = 2020,
}

@inproceedings{CTT100860569,
  author = {川口達也 and 齊藤 卓志 and 佐藤 勲},
  title = {粒子画像流速測定法による低アスペクト比Taylor-Couette流れの流動解析},
  booktitle = {},
  year = 2020,
}

@inproceedings{CTT100832204,
  author = {松本康佑 and 東孝祐 and 福谷和久 and 川口達也 and 佐藤勲 and 齊藤卓志},
  title = {流体粘度のShear-thinning性がシングルローターによる混合進展に与える影響},
  booktitle = {成形加工'20},
  year = 2020,
}

@inproceedings{CTT100832205,
  author = {丸山椋大 and 齊藤卓志 and 川口達也 and 佐藤勲},
  title = {分子動力学シミュレーションによる異種高分子材料の界面熱抵抗の推定},
  booktitle = {成形加工'20},
  year = 2020,
}

@inproceedings{CTT100814471,
  author = {Takushi Saito and Kento Yamada and Tatsuya Kawaguchi and Isao Satoh},
  title = {Effect of Compatibilizer on Thermal Resistance at Bonded Interface of Heterogeneous Polymers},
  booktitle = {Extended Abstracts of the 2nd Pacific Rim Thermal Engineering Conference},
  year = 2019,
}

@inproceedings{CTT100810769,
  author = {Yang-ming Fan and Takushi Saito and Tatsuya Kawaguchi and Isao Satoh},
  title = {Study of Surface Wetting Control of the Solid Body by Chemical States and Surface Geometry of Coated Nano-particles Layer},
  booktitle = {PSFVIP-12 Full Paper},
  year = 2019,
}

@inproceedings{CTT100810770,
  author = {Gea Ferdias Mumin and Tatsuya Kawaguchi and Takushi Saito},
  title = {Thermal Approach for Viscosity Matching in Simple Droplet for Achieving Dispersion Control by Non-homogeneous Temperature Field},
  booktitle = {PSFVIP-12 Full Papers},
  year = 2019,
}

@inproceedings{CTT100810771,
  author = {Jeong Yoona and 川口達也 and 齊藤卓志 and 佐藤勲},
  title = {多重円筒構造を有する酸素センサ内部流れの流動解析},
  booktitle = {熱工学コンファレンス2019講演論文集},
  year = 2019,
}

@inproceedings{CTT100810763,
  author = {山田健登 and 齊藤卓志 and 川口達也 and 佐藤勲},
  title = {高分子材料の接合界面熱抵抗に与える相溶化剤の影響},
  booktitle = {成形加工'19予稿集},
  year = 2019,
}

@inproceedings{CTT100810764,
  author = {樋口陸斗 and 東孝祐 and 福谷和久 and 川口達也 and 佐藤勲 and 齊藤卓志},
  title = {非充満状態で撹拌される粘弾性流体の混練挙動解析},
  booktitle = {成形加工'19予稿集},
  year = 2019,
}

@inproceedings{CTT100810768,
  author = {Takushi Saito and Yuki Noguchi and Kosuke Higashi and Kazuhisa Fukutani and Tatsuya Kawaguchi and Isao Satoh},
  title = {Flow Analysis of Viscoelastic Fluid Stirred by Single Rotor},
  booktitle = {Conference Proceedings of PPS35},
  year = 2019,
}

@inproceedings{CTT100810766,
  author = {川口達也 and 野口侑希 and 齊藤卓志 and 佐藤勲},
  title = {低アスペクト比におけるTaylor-Couette流れの流動構造解析},
  booktitle = {第56回日本伝熱シンポジウム予稿集},
  year = 2019,
}

@inproceedings{CTT100785499,
  author = {齊藤卓志 and 伊原哲志 and 川口達也 and 佐藤勲},
  title = {炭素繊維の強制配向による複合材料の熱伝導率向上},
  booktitle = {成形加工シンポジア'18予稿集},
  year = 2018,
}

@inproceedings{CTT100811256,
  author = {Tatsuya Kawaguchi and Yoona Jeong and Takushi Saito and Isao Satoh},
  title = {Flow Investigations within a concentric cylinders of gas sensor modulefor I.C. engines},
  booktitle = {Proc. 4th Int. Conf.  on Science, Engineering & Environment (SEE)},
  year = 2018,
}

@inproceedings{CTT100785500,
  author = {齊藤卓志 and 長谷川英紀 and 白石豊 and 造田敬一},
  title = {薄膜発熱体を用いた射出成形用急速加熱金型の研究},
  booktitle = {型技術ワークショップ2018 in ふくい 講演論文集},
  year = 2018,
}

@inproceedings{CTT100785501,
  author = {齊藤卓志 and 野口侑希 and KC Indra Bahadur and 東孝祐 and 福谷和久 and 川口達也 and 佐藤勲},
  title = {シングルローターにより攪拌される粘弾性流体の実験的解析},
  booktitle = {日本機械学会熱工学コンファレンス2018講演論文集},
  year = 2018,
}

@inproceedings{CTT100771421,
  author = {Tatsuya Kawaguchi and Takushi Saito and Isao Satoh},
  title = {Ultrasound Flow Metering for the Distorted Velocity Distribution by Means of the Parallel Shift Method},
  booktitle = {},
  year = 2018,
}

@inproceedings{CTT100772405,
  author = {鄭 有娜 and 川口 達也 and 齊藤 卓志 and 佐藤 勲},
  title = {開口部を有する二重円筒プロテクタ内部流れの可視化},
  booktitle = {第46回可視化情報シンポジウム講演論文集},
  year = 2018,
}

@inproceedings{CTT100790060,
  author = {Takushi Saito and Satoshi Ihada and Tatsuya Kawaguchi and Isao Satoh},
  title = {Thermal Conductivity Improvement of Fiber Orientation Control by Sheet Folding Method},
  booktitle = {ECS Transactions},
  year = 2018,
}

@inproceedings{CTT100790061,
  author = {Indra Bahadur KC and Kosuke Higashi and Yuki Noguchi and Tatsuya Kawaguchi and Isao Satoh and Takushi Saito},
  title = {Temperature Distribution Analysis of Viscoelastic Fluid Stirred by Single Triangular Rotor},
  booktitle = {ECS Transactions},
  year = 2018,
}

@inproceedings{CTT100772406,
  author = {Tatsuya Kawaguchi and Yoona Jeong and Takushi Saito and Isao Satoh},
  title = {Flow visualization in the cylindrical shrouds with apertures of the Oxygen sensor for the exhaust gas},
  booktitle = {Proc. 18th International Symposium on Flow Visualization},
  year = 2018,
}

@inproceedings{CTT100777420,
  author = {長谷川英紀 and 齊藤卓志 and 川口達也 and 佐藤勲 and 白石豊 and 造田敬一},
  title = {薄膜発熱体による急速加熱金型の発熱挙動解析と転写性評価},
  booktitle = {成形加工'18},
  year = 2018,
}

@inproceedings{CTT100777419,
  author = {佐藤勲 and 齊藤卓志},
  title = {エネルギー工学の観点から見た成形加工と金型温度制御},
  booktitle = {成形加工'18},
  year = 2018,
}

@inproceedings{CTT100790062,
  author = {Takushi Saito and Hideki Hasegawa and Tatsuya Kawaguchi and Isao Satoh and Yutaka Shiraishi and Kei-ichi Zouta},
  title = {Evaluation of heating performance and its impact on surface transcription by rapid heating mold using thin electric heater},
  booktitle = {PROCEEDINGS OF PPS-34},
  year = 2018,
}

@inproceedings{CTT100772407,
  author = {K. Higashi and Y. Noguchi and K. Fukutani and Tatsuya. Kawaguchi and Isao Satoh and Takushi Saito},
  title = {RHEOLOGICAL BEHAVIOR OF HIGH VISCOSITY FLUIDS AROUND A ROTATIONG BODY},
  booktitle = {Proc. 11th Pacific Symposium on Flow Visualization and Image Processing},
  year = 2017,
}

@inproceedings{CTT100777406,
  author = {齊藤卓志 and 曽我宏輔 and 石川和紀 and 川口達也 and 佐藤勲},
  title = {フィラー添加高分子材料における絶縁破壊電圧の予測シミュレーション},
  booktitle = {成形加工シンポジア'17},
  year = 2017,
}

@inproceedings{CTT100777413,
  author = {Takushi Saito and Tatsuya Kawaguchi and Isao Satoh},
  title = {Evaluation of Thermal Resistance at Welded Interface of Heterogeneous Polymer System},
  booktitle = {Proceedings of AWPP2017},
  year = 2017,
}

@inproceedings{CTT100777410,
  author = {Takushi Saito and Takaya Banno and Tatsuya Kawaguchi and Isao Satoh},
  title = {Estimation of Interfacial Thermal Resistance of Polymer Materials with Layer Structure by Effective Thermal Conductivity Measurement},
  booktitle = {Extended Abstracts of TFEC9},
  year = 2017,
}

@inproceedings{CTT100752498,
  author = {野口侑希 and 東孝祐 and 福谷和久 and 齊藤卓志 and 川口達也 and 佐藤勲},
  title = {粒子画像流速計測法を用いた粘弾性流体の混練挙動解析},
  booktitle = {成形加工'17},
  year = 2017,
}

@inproceedings{CTT100777404,
  author = {齊藤卓志 and 伴野貴哉 and 川口達也 and 佐藤勲},
  title = {高分子材料の接合界面における熱抵抗の評価},
  booktitle = {成形加工'17},
  year = 2017,
}

@inproceedings{CTT100752497,
  author = {曽我宏輔 and 齊藤卓志 and 佐藤勲 and 川口達也},
  title = {高熱伝導・高耐電圧を実現するセラミックスフィラー添加高分子複合材料の設計指針},
  booktitle = {第54回日本伝熱シンポジウム講演論文集CD-ROM},
  year = 2017,
}

@inproceedings{CTT100734987,
  author = {Takushi Saito and Tatsuya Kawaguchi and ISAO SATOH},
  title = {Application of Heat Transfer Control in Thermoplastic Polymer Processing},
  booktitle = {Program & Abstract Book of AWPP2016},
  year = 2016,
}

@inproceedings{CTT100734982,
  author = {Yang Ming Fan and Takushi Saito and Tatsuya Kawaguchi and Isao Satoh},
  title = {Study of Surface Wetting Control by Metal Nano-particles and Thermal Treatment},
  booktitle = {Proceedings of The 4th International Forum on Heat Transfer},
  year = 2016,
}

@inproceedings{CTT100734983,
  author = {Kosuke Soga and Takushi Saito and Kazunori Ishikawa and Tatsuya Kawaguchi and Isao Satoh},
  title = {Numerical Analysis of the Percolation Path Effect on the Thermal Conductivity in Composite Material},
  booktitle = {Proceedings of the 4th International Forum on Heat Transfer},
  year = 2016,
}

@inproceedings{CTT100734984,
  author = {齊藤卓志 and 前川恵哉 and 川口達也 and 佐藤勲},
  title = {ペレット状の熱可塑性高分子材料の乾燥挙動解析},
  booktitle = {日本機械学会熱工学コンファレンス2016講演論文集},
  year = 2016,
}

@inproceedings{CTT100734985,
  author = {前川恵哉 and 齊藤卓志 and 川口達也 and 佐藤勲},
  title = {水分拡散係数の温度依存性を考慮した樹脂ペレットの乾燥挙動シミュレーション},
  booktitle = {成形加工シンポジア'16予稿集},
  year = 2016,
}

@inproceedings{CTT100734986,
  author = {Takushi Saito and Tatsuya Kawaguchi and Isao Satoh},
  title = {Selective Laser Irradiation to Immiscible Polymer Blend for Dispersion Control},
  booktitle = {Proceedings of PPS-2016},
  year = 2016,
}

@inproceedings{CTT100726187,
  author = {Kei Kuramoto and Tatsuya Kawaguchi and Isao Satoh and Takushi Saito},
  title = {Flow rate measurement after 90 degrees bended pipe using multi-path ultrasound shift method},
  booktitle = {},
  year = 2016,
}

@inproceedings{CTT100716151,
  author = {齊藤卓志 and 川口達也 and 佐藤勲},
  title = {ふく射加熱による熱可塑性プラスチック成形加工の高度化},
  booktitle = {高分子学会予稿集},
  year = 2016,
}

@inproceedings{CTT100726188,
  author = {田島 淳 and 川口達也 and 佐藤 勲 and 齊藤卓志},
  title = {上面冷却された内部発熱矩形キャビティ内に発生する下降流の速度場解析},
  booktitle = {日本流体力学会年会 2016講演論文集},
  year = 2016,
}

@inproceedings{CTT100726186,
  author = {川口 達也 and 蔵本 圭 and 齊藤 卓志 and 佐藤 勲},
  title = {超音波シフト法による管内非軸対称流に適用可能な気体流量計の開発},
  booktitle = {可視化情報},
  year = 2016,
}

@inproceedings{CTT100726185,
  author = {川口 達也 and 齊藤 卓志 and 佐藤 勲},
  title = {レーザ誘起蛍光法を用いた低アスペクト比同軸二重円筒内流れの可視化},
  booktitle = {可視化情報},
  year = 2016,
}

@inproceedings{CTT100716139,
  author = {西田英耕 and 齊藤卓志 and 川口達也 and 佐藤勲 and 白石豊 and 秋田励紀 and 造田敬一},
  title = {薄膜発熱体による金型温度制御の表面転写性への影響},
  booktitle = {成形加工'16},
  year = 2016,
}

@inproceedings{CTT100716138,
  author = {森髙洋次郎 and 齊藤卓志 and 川口達也 and 佐藤勲},
  title = {選択ふく射加熱による非相溶ブレンド分散制御の押出プロセスへの適用},
  booktitle = {成形加工'16},
  year = 2016,
}

@inproceedings{CTT100716146,
  author = {曽我宏輔 and 齊藤卓志 and 石川和紀 and 佐藤勲 and 川口達也},
  title = {セラミックスフィラー添加高分子材料の熱伝導および電気絶縁特性の数値解析},
  booktitle = {第53回日本伝熱シンポジウム講演論文集CD-ROM},
  year = 2016,
}

@inproceedings{CTT100716144,
  author = {川口達也 and 田島淳 and 佐藤勲 and 齊藤卓志},
  title = {矩形キャビティにおける内部発熱を伴う自然対流の流動解析},
  booktitle = {第53回日本伝熱シンポジウム講演論文集CD-ROM},
  year = 2016,
}

@inproceedings{CTT100716148,
  author = {Kosuke Soga and Takushi Saito and Tatsuya Kawaguchi and Isao Satoh},
  title = {Effect of Inclusions on Dielectric Breakdown of Thin Polymer Film},
  booktitle = {Proceedings of PRTEC2016},
  year = 2016,
}

@inproceedings{CTT100716140,
  author = {Takushi Saito and Tatsuya Kawaguchi and Isao Satoh},
  title = {Efficiency Improvement of Temperature Control of Injection Molding Molds for Polymer Processing},
  booktitle = {Proceedings of PRTEC2016},
  year = 2016,
}

@inproceedings{CTT100812568,
  author = {Doan, D.H. and TAKUSHI SAITO and Kawaguchi, T. and Satoh, I.},
  title = {Dispersion control of immiscible polymer blend using selective heating by infrared laser irradiation: Numerical study},
  booktitle = {AIP Conference Proceedings},
  year = 2016,
}

@inproceedings{CTT100694950,
  author = {小川 翔 and 川口 達也 and 佐藤 勲 and 齊藤 卓志},
  title = {Light field PIVによる三次元流速測定法の測定精度に関する検討},
  booktitle = {},
  year = 2015,
}

@inproceedings{CTT100694949,
  author = {蔵本 圭 and 川口  達也 and 佐藤 勲 and 齊藤  卓志},
  title = {多線超音波シフト法による助走区間不要な気体流量計の開発},
  booktitle = {},
  year = 2015,
}

@inproceedings{CTT100716149,
  author = {齊藤卓志 and ドアン ホン ドク and 川口達也 and 佐藤勲},
  title = {赤外ふく射加熱による高分子ブレンドの分散制御},
  booktitle = {日本機械学会熱工学コンファレンス2015講演論文集},
  year = 2015,
}

@inproceedings{CTT100694954,
  author = {蔵本 圭 and 川口 達也 and 佐藤 勲 and 齊藤 卓志},
  title = {多線超音波シフト法を用いた曲がり管直後における流量 計測精度の検証},
  booktitle = {},
  year = 2015,
}

@inproceedings{CTT100694091,
  author = {川口達也 and 小川翔 and 佐藤勲 and 齊藤卓志},
  title = {Light field PIVにおける受光光学系が空間分解能に与える影響},
  booktitle = {第52回日本伝熱シンポジウム講演論文集},
  year = 2015,
}

@inproceedings{CTT100694093,
  author = {曽我宏輔 and 齊藤卓志 and 佐藤勲 and 川口達也},
  title = {熱電場を考慮したフェーズフィールド法による絶縁破壊シミュレーション},
  booktitle = {第52回日本伝熱シンポジウム講演論文集},
  year = 2015,
}

@inproceedings{CTT100694090,
  author = {蔵本圭 and 川口達也 and 佐藤勲 and 齊藤卓志},
  title = {超音波シフト法を用いた気体流量計におけるシフト量測定法に関する比較検討},
  booktitle = {第52回日本伝熱シンポジウム講演論文集},
  year = 2015,
}

@inproceedings{CTT100694094,
  author = {西田英耕 and 齊藤卓志 and 川口達也 and 佐藤勲 and 白石豊 and 秋田励紀 and 造田敬一 and 下舞健},
  title = {薄膜発熱体による金型表面温度分布の制御手法の検討},
  booktitle = {成形加工'15},
  year = 2015,
}

@inproceedings{CTT100694085,
  author = {横山有成 and 齊藤卓志 and 川口達也 and 佐藤勲},
  title = {金属ナノインクの塗布性に与える基板表面前処理の影響},
  booktitle = {成形加工シンポジア'14},
  year = 2014,
}

@inproceedings{CTT100812869,
  author = {ストジャリットタム ジャルチャイ and 佐藤 勲 and TAKUSHI SAITO and 川口 達也},
  title = {G0610202 デシカント材を利用した急速加熱/冷却システムの研究([G061-02]熱工学部門一般セッション(2)伝熱II)},
  booktitle = {年次大会 : Mechanical Engineering Congress, Japan},
  year = 2014,
}

@inproceedings{CTT100694087,
  author = {Takushi Saito and Tatsuya Kawaguchi and Isao Satoh},
  title = {Fundamental Study on Agglomeration Control of Metallic Nano-particles by Thermal Treatment},
  booktitle = {Proceedings of the 15th International Heat Transfer Conference},
  year = 2014,
}

@inproceedings{CTT100694947,
  author = {Tatsuya KAWAGUCHI* and Takushi SAITO and Isao SATOH},
  title = {Volumetric reconstruction of particulate dispersions from a light field image by means of a plenoptic camera},
  booktitle = {},
  year = 2014,
}

@inproceedings{CTT100694946,
  author = {S. OGAWA and T. KAWAGUCHI and I. SATOH and T. SAITO},
  title = {RECONSTRUCTION OF VOLUMETRIC PARTICULE FIELD FROM A LIGHT FIELD IMAGE},
  booktitle = {},
  year = 2014,
}

@inproceedings{CTT100677035,
  author = {西田英耕 and 齊藤卓志 and 川口達也 and 佐藤勲 and 白石豊 and 秋田励紀 and 造田敬一},
  title = {射出金型表面温度分布に与える薄膜発熱体の構造不均一性の影響},
  booktitle = {成形加工'14},
  year = 2014,
}

@inproceedings{CTT100677034,
  author = {横山 有成 and 佐藤 勲 and 齊藤 卓志 and 川口 達也},
  title = {銀ナノ粒子表面における凝集防止層の熱分解挙動のモデル化},
  booktitle = {成形加工'14},
  year = 2014,
}

@inproceedings{CTT100677033,
  author = {小宮山 智哉 and Kazunori Ishikawa and 齊藤 卓志 and 川口 達也 and 佐藤 勲},
  title = {窒化ホウ素の分散状況による樹脂材料の熱伝導率変化},
  booktitle = {成形加工'14},
  year = 2014,
}

@inproceedings{CTT100677032,
  author = {Takushi Saito and Tomoya Komiyama and Ishikawa Kazunori and Tatsuya Kawaguchi and Isao Satoh},
  title = {Experimental Analysis of Micro-scale Structure of Polymer Sheet Containing Boron-nitride},
  booktitle = {Proceedings of PPS30},
  year = 2014,
}

@inproceedings{CTT100677014,
  author = {川口達也 and 阿部尭 and 佐藤勲 and 齊藤卓志},
  title = {ナノバブルのブラウン運動に対する界面活性剤の影響},
  booktitle = {第51回日本伝熱シンポジウム講演論文集},
  year = 2014,
}

@inproceedings{CTT100677013,
  author = {小川 翔 and 川口達也 and 佐藤勲 and 齊藤卓志},
  title = {Light Field Cameraを用いた流動場内の粒子群像の三次元再構成},
  booktitle = {第51回日本伝熱シンポジウム講演論文集},
  year = 2014,
}

@inproceedings{CTT100680828,
  author = {岩附信行 and 齋藤義夫 and 齊藤卓志},
  title = {機械設計教育と連動した創造性育成科目（東京工業大学工学部機械知能システム学科「機械知能システム創造」について）},
  booktitle = {Designシンポジウム2014USB講演論文集},
  year = 2014,
}

@inproceedings{CTT100677012,
  author = {TAKUSHI SAITO and Tatsuya Kawaguchi and Isao Satoh},
  title = {Controlled Rapid Heating of Mold Surface by Thin Electrical Heating Element},
  booktitle = {Proceedings of AWPP2013},
  year = 2013,
}

@inproceedings{CTT100677011,
  author = {齊藤卓志 and 川口達也 and 佐藤勲},
  title = {赤外ふく射特性の温度依存性を考慮したポリプロピレンフィルムの温度計測},
  booktitle = {成形加工シンポジア'13予稿集},
  year = 2013,
}

@inproceedings{CTT100661714,
  author = {T Abe and T Kawaguchi and TAKUSHI SAITO and ISAO SATOH},
  title = {Molecular dynamics analysis for the Brownian motion of nano bubble},
  booktitle = {Proc. III International Conference on Particle-based Methods},
  year = 2013,
}

@inproceedings{CTT100661696,
  author = {阿部尭 and 川口達也 and 齊藤卓志 and 佐藤勲},
  title = {分子動力学によるナノバブルのブラウン運動解析},
  booktitle = {混相流シンポジウム2013講演論文集},
  year = 2013,
}

@inproceedings{CTT100661702,
  author = {ヨウシイ and 川口達也 and 齊藤卓志 and 佐藤勲},
  title = {超音波シフト法の多線化による流量計測},
  booktitle = {可視化情報シンポジウム講演論文集},
  year = 2013,
}

@inproceedings{CTT100662241,
  author = {小林哲 and 齊藤卓志 and 佐藤勲 and 川口達也},
  title = {銀ナノ粒子の電気抵抗率に与える熱処理条件の影響},
  booktitle = {成形加工'13講演予稿集},
  year = 2013,
}

@inproceedings{CTT100661707,
  author = {川口達也 and 齊藤卓志 and 佐藤勲},
  title = {Light Field Cameraを用いたPIV計測},
  booktitle = {第50回日本伝熱シンポジウム講演論文集},
  year = 2013,
}

@inproceedings{CTT100661708,
  author = {小宮山智哉 and 石川和紀 and 佐藤勲 and 齊藤卓志 and 川口達也},
  title = {窒化ホウ素を分散させた樹脂材料の温度伝播評価},
  booktitle = {第50回日本伝熱シンポジウム講演論文集},
  year = 2013,
}

@inproceedings{CTT100662240,
  author = {尾崎展也 and 齊藤卓志 and 川口達也 and 佐藤勲},
  title = {薄膜発熱体による金型表面温度制御に関する基礎的検討},
  booktitle = {成形加工'13講演論文集},
  year = 2013,
}

@inproceedings{CTT100661723,
  author = {川口達也 and 齊藤卓志 and 佐藤勲},
  title = {ダイナミック干渉画像法の測定精度に関する検討},
  booktitle = {第21回微粒化シンポジウム講演論文集},
  year = 2012,
}

@inproceedings{CTT100662237,
  author = {齊藤卓志 and 小林哲 and 川口達也 and 佐藤勲},
  title = {銀ナノインクの導電性に与える処理条件の影響},
  booktitle = {成形加工シンポジア'12講演論文集},
  year = 2012,
}

@inproceedings{CTT100661726,
  author = {Tatsuya Kawaguchi and TAKUSHI SAITO and ISAO SATOH},
  title = {High-speed ILIDS measurement of evaporating droplet},
  booktitle = {Proc. 12th Triennial International Conference on Liquid Atomization and Spray Systems},
  year = 2012,
}

@inproceedings{CTT100642482,
  author = {Tomoya Komiyama and Takushi Saito and Tatsuya Kawaguchi and Isao Saoth},
  title = {Fabrication of Electrically Conductive Part on Resin Substrate by Carbon Dioxide Laser Irradiation to Silver Nanoink},
  booktitle = {Proceedings of the AWPP2012},
  year = 2012,
}

@inproceedings{CTT100642484,
  author = {Ziwei Yang and Isao Satoh and Takushi Saito and Tatsuya Kawaguchi},
  title = {Evaluation of Mold Temperature Control System in Injection Molding by Using Heat Exchange with Water/Vapor Phase Change},
  booktitle = {Proceedings of the AWPP2012},
  year = 2012,
}

@inproceedings{CTT100661717,
  author = {Tatsuya Kawaguchi and TAKUSHI SAITO and ISAO SATOH},
  title = {Experimental analysis of natural convection with Joule heating by means of particle image velocimetry},
  booktitle = {proc. 16th Int. Symp. on Applications of Laser Techniques to Fluid Mechanics},
  year = 2012,
}

@inproceedings{CTT100642481,
  author = {谷村貴大 and 齊藤卓志 and 佐藤勲 and 川口達也},
  title = {環境によるポリ乳酸フィルムの表面性状変化の検討},
  booktitle = {成形加工'12講演論文集},
  year = 2012,
}

@inproceedings{CTT100642480,
  author = {小宮山智哉 and 齊藤卓志 and 川口達也 and 佐藤勲},
  title = {銀ナノインクへの赤外線レーザー照射による樹脂基板表面での薄膜導電パス形成},
  booktitle = {成形加工'12講演論文集},
  year = 2012,
}

@inproceedings{CTT100642478,
  author = {ヨウシイ and 佐藤勲 and 齊藤卓志 and 川口達也},
  title = {水の相変化を伴う熱移動を利用した金型加熱/冷却に関する研究},
  booktitle = {成形加工'12講演論文集},
  year = 2012,
}

@inproceedings{CTT100642476,
  author = {阿部尭 and 川口達也 and 齊藤卓志 and 佐藤勲},
  title = {音響タフト法による超音波気体流量計の開発},
  booktitle = {第49回日本伝熱シンポジウム講演論文集},
  year = 2012,
}

@inproceedings{CTT100642475,
  author = {関口智大 and 川口達也 and 齊藤卓志 and 佐藤勲},
  title = {ナノバブルのブラウン運動に与える界面構造の影響},
  booktitle = {第49回日本伝熱シンポジウム講演論文集},
  year = 2012,
}

@inproceedings{CTT100642477,
  author = {曽我宏輔 and 佐藤勲 and 齊藤卓志 and 川口達也},
  title = {アルミニウム空気電池のメカニカルチャージによる二次電池化},
  booktitle = {第49回日本伝熱シンポジウム講演論文集},
  year = 2012,
}

@inproceedings{CTT100634969,
  author = {齊藤卓志 and 楊子瑋 and 川口達也 and 佐藤勲},
  title = {ヒートパイプによる効率的な成形金型温度コントロール},
  booktitle = {型技術ワークショップ2011講演論文集},
  year = 2011,
}

@inproceedings{CTT100634970,
  author = {齊藤卓志 and 川口達也 and 佐藤勲},
  title = {イオン液体を用いたマイクロ流動のSEM観察},
  booktitle = {成形加工シンポジア'11講演予稿集},
  year = 2011,
}

@inproceedings{CTT100635161,
  author = {中城啓太 and 齊藤卓志 and 川口達也 and 佐藤勲},
  title = {ヒートパイプによる成形金型の加熱・冷却システムの研究},
  booktitle = {日本機械学会2011年度年次大会講演予稿集},
  year = 2011,
}

@inproceedings{CTT100634968,
  author = {関口智大 and 川口達也 and 齊藤卓志 and 佐藤勲},
  title = {ナノバブルのブラウン運動と帯電性の解析},
  booktitle = {日本機械学会2011年度年次大会講演予稿集},
  year = 2011,
}

@inproceedings{CTT100629208,
  author = {鷲頭伸一 and 川口達也 and 齊藤卓志 and 佐藤勲},
  title = {粒子法による非ニュートン流体の塗布工程の検討},
  booktitle = {成形加工'11講演論文集},
  year = 2011,
}

@inproceedings{CTT100629206,
  author = {鷲頭伸一 and 川口達也 and 齊藤卓志 and 佐藤勲},
  title = {自由表面を持つ非ニュートン流体の粒子法シミュレーション},
  booktitle = {第48回日本伝熱シンポジウム講演論文集},
  year = 2011,
}

@inproceedings{CTT100629207,
  author = {近藤昌孝 and 川口達也 and 齊藤卓志 and 佐藤勲},
  title = {SEM-PIVによるマイクロ流路内の流動計測},
  booktitle = {第48回日本伝熱シンポジウム講演論文集},
  year = 2011,
}

@inproceedings{CTT100632038,
  author = {T.Kawaguchi and M.Kondo and I.Satoh and T.Saito},
  title = {Microscale visualization of ionic liquid in open channel by scanning electron microscope},
  booktitle = {Proceedings of the 11th Asian Symposium on Visualization,},
  year = 2011,
}

@inproceedings{CTT100619925,
  author = {Takushi Saito and Tatsuya Kawaguchi and Isao Satoh},
  title = {Formation of Electro-Conductive Part on Polymeric Material Surface by CO2 Laser Irradiation},
  booktitle = {Proceedings of the 8th ASME-JSME Thermal Engineering Joint Conference},
  year = 2011,
}

@inproceedings{CTT100619929,
  author = {Tomohiro Sekiguchi and Tatsuya Kawaguchi and Isao Satoh and Takushi Saito},
  title = {Electric Charge of Micro and Nano Bubbles by Interferometric Laser Imaging Technique},
  booktitle = {Proceedings of the 8th ASME-JSME Thermal Engineering Joint Conference},
  year = 2011,
}

@inproceedings{CTT100812179,
  author = {Nakngoenthong, J. and Naksuk, N. and Kanarat, A. and TAKUSHI SAITO},
  title = {Supervisory level control of robot plasma spray coating process with task level modification based on process database},
  booktitle = {ECTI-CON 2011 - 8th Electrical Engineering/ Electronics, Computer, Telecommunications and Information Technology (ECTI) Association of Thailand - Conference 2011},
  year = 2011,
}

@inproceedings{CTT100619918,
  author = {Takushi Saito and Tatsuya Kawaguchi and Isao Satoh},
  title = {Distribution Measurement of Refractive Index in Injection Molded Transparent Products by Interferometric Computer Tomography},
  booktitle = {Proceedings of the 9th Asian Workshop on Polymer Processing},
  year = 2010,
}

@inproceedings{CTT100629295,
  author = {Tatsuya KAWAGUCHI and Isao SATOH and Takushi SAITO},
  title = {Lagrangian diagnostics of evaporating spray system by means of high-speed camera and Nd:YLF laser},
  booktitle = {Proc. 5th International Symposium on Advanced Science and Technology in Experimental Mechanics},
  year = 2010,
}

@inproceedings{CTT100629302,
  author = {Tatsuya Kawaguchi and Isao Satoh and Takushi Saito},
  title = {EXPERIMENTAL AND NUMERICAL INVESTIGATIONS OF THE  COATING PROCESS OF MELT-TRANSCRIPTION MOLDING PROCESS},
  booktitle = {Proceedings of the Polymer Processing Society 26th Regional Meeting},
  year = 2010,
}

@inproceedings{CTT100629298,
  author = {川口 達也 and 齊藤 卓志 and 佐藤 勲},
  title = {狭隘なせん断場に流入する非ニュートン流体の PIV 計測},
  booktitle = {可視化情報学会2010年全国講演会講演論文集},
  year = 2010,
}

@inproceedings{CTT100612188,
  author = {Tatsuya Kawaguchi and I.Satoh and T.Saito},
  title = {Dynamic ILIDS measurement by means of high-speed Nd:YLF laser},
  booktitle = {Proceedings of the 23rd Annual Conference on Liquid Atomization and Spray Systems},
  year = 2010,
}

@inproceedings{CTT100610040,
  author = {Takushi Saito and Tatsuo Kurebayashi and Tatsuya Kawaguchi and Isao Satoh},
  title = {A Study on New Transmission Laser Welding Utilizing Moisture Adsorption of Amorphous Polymeric Material},
  booktitle = {Proceedings of the Polymer Processing Society 26th Annual Meeting},
  year = 2010,
}

@inproceedings{CTT100612187,
  author = {神岡紀明 and 川口達也 and 佐藤勲 and 齊藤卓志},
  title = {マイクロバブルのゼータ電位及び径に与える発生条件・界面活性剤の影響},
  booktitle = {日本混相流学会年会講演会2010講演論文集},
  year = 2010,
}

@inproceedings{CTT100611125,
  author = {Tatsuya KAWAGUCHI and Shinichi Washizu and Isao SATOH and Takushi SAITO},
  title = {Experimental and numerical investigation of melt-transcription  molding process},
  booktitle = {Proceedings of the 4TH International Conference on Advanced Computational Engineering and Experimenting},
  year = 2010,
}

@inproceedings{CTT100610038,
  author = {児玉健次 and 齊藤卓志 and 川口達也 and 佐藤勲},
  title = {マイクロスケール熱インプリントの可視化観察による転写状況の詳細検討},
  booktitle = {成形加工'10講演論文集},
  year = 2010,
}

@inproceedings{CTT100610039,
  author = {鷲頭伸一 and 川口達也 and 齊藤卓志 and 佐藤勲},
  title = {粒子法を用いた流動解析による塗布成形のパラメータ検討},
  booktitle = {成形加工'10講演論文集},
  year = 2010,
}

@inproceedings{CTT100610037,
  author = {宮川紘一 and 齊藤卓志 and 川口達也 and 佐藤勲},
  title = {炭酸ガスレーザー照射による樹脂材料表面の局所炭化と導電性の実現},
  booktitle = {成形加工'10講演論文集},
  year = 2010,
}

@inproceedings{CTT100610036,
  author = {榑林達夫 and 齊藤卓志 and 川口達也 and 佐藤勲},
  title = {ふく射吸収係数が制御されたレーザー透過接合手法による接合強度の評価},
  booktitle = {成形加工'10講演論文集},
  year = 2010,
}

@inproceedings{CTT100610035,
  author = {関口智大 and 川口達也 and 齊藤卓志 and 佐藤勲},
  title = {回転検光子法とCTを組み合わせた透明高分子材料内部の複屈折分布測定},
  booktitle = {成形加工'10講演論文集},
  year = 2010,
}

@inproceedings{CTT100610033,
  author = {神岡紀明 and 川口達也 and 佐藤勲 and 齊藤卓志},
  title = {加圧溶解法により生成されたマイクロ・ナノバブルの帯電特性},
  booktitle = {第47回日本伝熱シンポジウム講演論文集},
  year = 2010,
}

@inproceedings{CTT100610034,
  author = {齊藤卓志 and 宮川紘一 and 川口達也 and 佐藤勲},
  title = {レーザー照射による高分子材料への導電性付与},
  booktitle = {第47回日本伝熱シンポジウム講演論文集},
  year = 2010,
}

@inproceedings{CTT100629293,
  author = {鷲頭伸一 and 川口達也 and 齊藤 卓志 and 佐藤 勲},
  title = {粒子法による溶融樹脂の塗布挙動シミュレーション},
  booktitle = {第24回数値流体力学シンポジウム講演論文集},
  year = 2010,
}

@inproceedings{CTT100610032,
  author = {Takushi Saito and Tastuya Kawaguchi and Isao Satoh},
  title = {Laser Transmission Welding Technique Utilizing Change of Absorption Coefficient of Material by Moisture Adsorption},
  booktitle = {Extended Abstracts of Asian Workshop on Polymer Processing 2009},
  year = 2009,
}

@inproceedings{CTT100604250,
  author = {川口 達也 and 佐藤 勲 and 齊藤 卓志},
  title = {光散乱の画像処理によるマイクロバブルの複合計測},
  booktitle = {可視化情報全国講演会2009講演論文集},
  year = 2009,
}

@inproceedings{CTT100604249,
  author = {川口達也 and 佐藤勲 and 齊藤卓志 and 伊東宏},
  title = {PIVによる高粘度流体塗布過程の可視化},
  booktitle = {可視化情報全国講演会2009講演論文集},
  year = 2009,
}

@inproceedings{CTT100610031,
  author = {齊藤卓志 and 佐藤勲 and 川口達也},
  title = {圧縮成形された透明部品内部の屈折率分布に与える成形条件の影響},
  booktitle = {成形加工シンポジア'09講演予稿集},
  year = 2009,
}

@inproceedings{CTT100604251,
  author = {神岡 紀明 and 川口 達也 and 佐藤 勲 and 齊藤 卓志},
  title = {電界中の微細気泡挙動の干渉画像計測},
  booktitle = {日本機械学会2009年度年次大会},
  year = 2009,
}

@inproceedings{CTT100604252,
  author = {Tatsuya Kawaguchi and Isao. Satoh and Takushi. Saito and Hiroshi Ito},
  title = {PIV analysis of Melt–Transcription Molding Process},
  booktitle = {Proceedings of the 8th International symposium on particle image velocimetry},
  year = 2009,
}

@inproceedings{CTT100604253,
  author = {神岡 紀明 and 川口 達也 and 佐藤 勲 and 齊藤 卓志},
  title = {電界中の微細気泡挙動の可視化},
  booktitle = {第37回可視化情報シンポジウム講演論文集},
  year = 2009,
}

@inproceedings{CTT100582763,
  author = {齊藤卓志 and 岩本篤 and 川口達也 and 佐藤勲},
  title = {水分吸着による材料の吸収係数変化を利用したレーザー透過接合手法},
  booktitle = {成形加工'09講演論文集},
  year = 2009,
}

@inproceedings{CTT100582761,
  author = {北村弘通 and 佐藤勲 and 斉藤卓志 and 川口達也 and 柏木孝夫},
  title = {ハイブリッドデシカント空調用デシカントの吸脱着特性},
  booktitle = {第46回日本伝熱シンポジウム講演論文集},
  year = 2009,
}

@inproceedings{CTT100582764,
  author = {伊東宏 and 佐藤勲 and 斉藤卓志 and 焼本和利},
  title = {熱可塑性樹脂製品への微細形状転写における粘着効果に関する研究},
  booktitle = {成形加工'09講演論文集},
  year = 2009,
}

@inproceedings{CTT100582774,
  author = {児玉健次 and 斉藤卓志 and 川口達也 and 佐藤勲},
  title = {効率的に微細転写状況を可視化観察する装置の開発},
  booktitle = {成形加工'09講演論文集},
  year = 2009,
}

@inproceedings{CTT100582751,
  author = {齊藤卓志 and 真鍋礼男 and 南博昭 and 大塚正人 and 川口達也 and 佐藤勲},
  title = {射出成形品からの薄片切り出しによる試料内複屈折への影響},
  booktitle = {成形加工シンポジア'08講演論文集},
  year = 2008,
}

@inproceedings{CTT100566052,
  author = {TAKUSHI SAITO and Motoki Noko and Tatsuya Kawaguchi and Isao Satoh},
  title = {Small Scale Molding System for Thermoplastic Materials using Strong Ultrasonic Vibration},
  booktitle = {Proceedings of the 3rd JSME/ASME International Conference on Material and Processing},
  year = 2008,
}

@inproceedings{CTT100565215,
  author = {Tatsuya Kawaguchi and ISAO SATOH and TAKUSHI SAITO},
  title = {Novel interferometric laser imaging for spray and microbubble sizing – one of the successful Mie scattering applications},
  booktitle = {Proceedings of the workshop “Mie Theory 1908 - 2008: Present developments and interdisciplinary aspects of light scattering”},
  year = 2008,
}

@inproceedings{CTT100566051,
  author = {Takushi Saito and Motoki Noko and Tatsuya Kawaguchi and Isao Satoh},
  title = {Fundamental Study of Molding System for Thermoplastic Materials using Ultrasonic Vibration},
  booktitle = {Proceedings of the Second International Forum on Heat Transfer (IFHT2008)},
  year = 2008,
}

@inproceedings{CTT100565213,
  author = {TAKUSHI SAITO and ISAO SATOH and Tatsuya Kawaguchi},
  title = {Micro Molding System for Thermoplastic Materials Using Strong Ultrasonic Wave},
  booktitle = {Proceedings of the Asian Workshop on Polymer Processing 2008 (AWPP2008)},
  year = 2008,
}

@inproceedings{CTT100565217,
  author = {Tatsuya Kawaguchi and ISAO SATOH and TAKUSHI SAITO},
  title = {Visualization of microscale bubbles in fluid by interferometric laser imaging technique},
  booktitle = {Proceedingd of the 13th International Symposium on Flow Visualization},
  year = 2008,
}

@inproceedings{CTT100563096,
  author = {Takushi Saito and Hiroshi Ito and Tatsuya Kawaguchi and Isao Satoh},
  title = {Study on Transcription Improvement by Visualization of Melt-transcription Molding Process},
  booktitle = {CD-ROM Proceedings of Polymer Processing Society 24th Annual Meeting},
  year = 2008,
}

@inproceedings{CTT100563091,
  author = {伊東宏 and 佐藤勲 and 斉藤卓志 and 焼本和利},
  title = {溶融樹脂の塗布による微細転写挙動の基礎的研究},
  booktitle = {成形加工'08},
  year = 2008,
}

@inproceedings{CTT100563090,
  author = {濃香元基 and 斉藤卓志 and 川口達也 and 佐藤勲},
  title = {強力超音波を用いた熱可塑化樹脂用の小型成形システム},
  booktitle = {成形加工'08},
  year = 2008,
}

@inproceedings{CTT100563094,
  author = {遠藤淳生 and 佐藤勲 and 川口達也 and 斉藤卓志},
  title = {干渉CT法による透明射出成形品内部の屈折率分布測定},
  booktitle = {成形加工 ' 08},
  year = 2008,
}

@inproceedings{CTT100563099,
  author = {Takushi Saito and Hiroshi Ito and Tatsuya Kawaguchi and Isao Satoh},
  title = {Study of Transcription Mechanism of Melt-transcription Molding Process},
  booktitle = {CD-ROM Proceedings of The 42nd IUPAC World Polymer Congress},
  year = 2008,
}

@inproceedings{CTT100563085,
  author = {出川貴雅 and 川口達也 and 佐藤勲 and 斉藤卓志},
  title = {レーザー干渉画像法による微細気泡の溶解挙動計測},
  booktitle = {第45回日本伝熱シンポジウム講演論文集},
  year = 2008,
}

@inproceedings{CTT100552722,
  author = {伊東 宏 and 佐藤 勲 and 斉藤卓志 and 焼本和利},
  title = {溶融微細転写プロセスにおける微細転写挙動の基礎的研究},
  booktitle = {成形加工シンポジア'07},
  year = 2007,
}

@inproceedings{CTT100552720,
  author = {斉藤卓志 and 花岡裕介 and 川口達也 and 佐藤 勲 and 杉山慎一 and 内藤実成 and 古野伸一},
  title = {アルミフレークが添加された射出成形平板の外観評価に関する基礎的検討},
  booktitle = {成形加工シンポジア'07},
  year = 2007,
}

@inproceedings{CTT100552721,
  author = {濃香元基 and 斉藤卓志 and 川口達也 and 佐藤 勲},
  title = {超音波加振を用いた熱可塑性樹脂成形システムの基礎検討},
  booktitle = {成形加工シンポジア'07},
  year = 2007,
}

@inproceedings{CTT100552719,
  author = {斉藤卓志 and 伊東 宏 and 川口達也 and 佐藤 勲},
  title = {高粘度流体の塗布プロセスにおける伸展挙動の可視化解析},
  booktitle = {可視化情報全国講演会講演論文集},
  year = 2007,
}

@inproceedings{CTT100552718,
  author = {Takushi Saito and Isao Satoh and Tatsuya Kawaguchi},
  title = {Local Radiation Heating Technique of Polymeric Materials using Functional-dye},
  booktitle = {Proc. 2007 ASME-JSME Thermal Engineering Summer Heat Transfer Conference},
  year = 2007,
}

@inproceedings{CTT100534320,
  author = {高岡俊允 and 河合伸典 and 大割寛 and 北川清一郎 and 風間邦彦 and 安原鋭幸 and 斉藤卓志 and 伊藤浩志},
  title = {非晶性高分子材料における超微細構造を有する成形品の成形転写性と高次構造2},
  booktitle = {成形加工'07講演論文集},
  year = 2007,
}

@inproceedings{CTT100534321,
  author = {原雄太 and 伊東宏 and 斉藤卓志 and 川口達也 and 佐藤勲},
  title = {溶融微細転写プロセスをモデル化した高粘度流体の伸展挙動の可視化解析},
  booktitle = {成形加工'07講演論文集},
  year = 2007,
}

@inproceedings{CTT100534319,
  author = {北村弘通 and 斉藤卓志 and 川口達也 and 佐藤勲},
  title = {炭酸ガスレーザー加熱による高分子材料表面の自己組織化的構造形成の観察},
  booktitle = {成形加工'07講演論文集},
  year = 2007,
}

@inproceedings{CTT100534318,
  author = {斉藤卓志 and 西智規 and 川口達也 and 佐藤勲},
  title = {材料のふく射吸収係数制御による透明樹脂内部の局所加熱手法の検討},
  booktitle = {成形加工'07講演論文集},
  year = 2007,
}

@inproceedings{CTT100534316,
  author = {出川貴雅 and 川口達也 and 佐藤勲 and 斉藤卓志},
  title = {干渉画像法を用いたマイクロバブル溶解挙動の計測},
  booktitle = {第44回日本伝熱シンポジウム講演論文集},
  year = 2007,
}

@inproceedings{CTT100534322,
  author = {Tatsuya Kawaguchi and Isao Satoh and Takushi Saito},
  title = {Flow Visualization by Interferometric Laser Imaging for Bubble Sizing Technique},
  booktitle = {Proceedings of the 6th Pacific Symposium on Flow Visualization and Image Procesing},
  year = 2007,
}

@inproceedings{CTT100534315,
  author = {平野峻之 and 川口達也 and 斉藤卓志 and 佐藤勲},
  title = {強制対流場における有限縞干渉法を用いた曲面温度分布計測の精度向上の検討},
  booktitle = {第44回日本伝熱シンポジウム講演論文集},
  year = 2007,
}

@inproceedings{CTT100534317,
  author = {西智規 and 斉藤卓志 and 川口達也 and 佐藤勲},
  title = {材料の光・熱刺激による物性変化を利用した選択加熱手法の検討},
  booktitle = {第44回日本伝熱シンポジウム講演論文集},
  year = 2007,
}

@inproceedings{CTT100534314,
  author = {Takushi Saito and Isao Satoh and Tatsuya Kawaguchi},
  title = {Visualization of Heat and Mass Transfer in Direct Embossing Process using Ultrasonic Wave Excitation},
  booktitle = {Proceedings of Asian Workshop on Polymer Processing 2006},
  year = 2006,
}

@inproceedings{CTT100534313,
  author = {斉藤卓志 and 川口達也 and 佐藤勲},
  title = {転写から離型に至るホットエンボス加工の微視的観察},
  booktitle = {成形加工シンポジア'06講演論文集},
  year = 2006,
}

@inproceedings{CTT100521715,
  author = {Toshiyuki Yasuhara and Yasuyuki Araki and Hiroshi Aihara and Hiroshi Ito and Takushi Saito and Naoto Ohtake},
  title = {Influence of Fiber Orientation on Mechanical Properties in Thin-wall Injection molding of CNF/PP Composites},
  booktitle = {CD-ROM Proceedings of Polymer Processing Society 22th Annual Meeting},
  year = 2006,
}

@inproceedings{CTT100521717,
  author = {Takushi Saito and Atsushi Tajiri and Hiroshi Ito and Toshiyuki Yasuhara and Tatsuya Kawaguchi and Isao Satoh},
  title = {Fundamental Study on Polymer Materials Temperature Measurement and Its Application to Precise Process Monitoring},
  booktitle = {CD-ROM Proceedings of Polymer Processing Society 22th Annual Meeting},
  year = 2006,
}

@inproceedings{CTT100521716,
  author = {Hiroshi Ito and Isao Satoh and Takushi Saito and Kazutoshi Yakemoto},
  title = {A Melt-Transcription Process to Fabricate Thermoplastic Products with Homogeneous Surface Micro Structures Applied to Display Parts and Micro-Fluidic Devices},
  booktitle = {CD-ROM Proceedings of Polymer Processing Society 22th Annual Meeting},
  year = 2006,
}

@inproceedings{CTT100521714,
  author = {Kunihiko Kazama and Hiroshi Ito and Toshiyuki Yasuhara and Takushi Saito and Takeshi Kikutani},
  title = {Structure and Properties of Thin-wall Molded Products with Micro Surface Features},
  booktitle = {CD-ROM Proceedings of Polymer Processing Society 22th Annual Meeting},
  year = 2006,
}

@inproceedings{CTT100521713,
  author = {Takushi Saito and Tatsuya Kawaguchi and Isao Satoh},
  title = {Visualization of Micro-scale Polymer Melt Filling during Hot Embossing Lithography Process},
  booktitle = {CD-ROM Proceedings of Polymer Processing Society 22th Annual Meeting},
  year = 2006,
}

@inproceedings{CTT100521708,
  author = {伊藤浩志 and 風間邦彦 and 安原鋭幸 and 斉藤卓志 and 鞠谷雄士 and 林和樹 and 山極佳年 and 坂田雄一},
  title = {マイクロ射出成形プロセスにおける超薄肉流路でのオンライン光学異方性計測},
  booktitle = {成形加工'06講演予稿集},
  year = 2006,
}

@inproceedings{CTT100521711,
  author = {磯崎佑允 and 佐藤勲 and 斉藤卓志 and 川口達也},
  title = {超音波振動を利用した微細構造直接転写プロセスの基礎研究},
  booktitle = {成形加工'06講演予稿集},
  year = 2006,
}

@inproceedings{CTT100521709,
  author = {高岡俊允 and 八尾和幸 and 北川清一郎 and 伊藤浩志 and 安原鋭幸 and 斉藤卓志},
  title = {非晶性高分子材料における超微細構造を有する成形品の成形転写性と高次構造},
  booktitle = {成形加工'06講演予稿集},
  year = 2006,
}

@inproceedings{CTT100521710,
  author = {古田真美 and 佐藤勲 and 斉藤卓志 and 川口達也},
  title = {伝熱媒体の相変化を利用した射出成形金型の高速温度制御},
  booktitle = {成形加工'06講演予稿集},
  year = 2006,
}

@inproceedings{CTT100521712,
  author = {斉藤卓志 and 田尻篤史 and 伊藤浩志 and 安原鋭幸 and 佐藤勲 and 川口達也},
  title = {接触界面温度測定によるプロセスモニタリングの可能性},
  booktitle = {成形加工'06講演予稿集},
  year = 2006,
}

@inproceedings{CTT100521707,
  author = {由川格 and 佐藤勲 and 斉藤卓志 and 川口達也},
  title = {エネルギー削減を目指した原料の気中予備溶解によるガラス溶融過程の検討},
  booktitle = {第43回日本伝熱シンポジウム講演論文集},
  year = 2006,
}

@inproceedings{CTT100521719,
  author = {Takayuki Hirano and Tatsuya Kawaguchi and Isao Satoh and Takushi Saito},
  title = {Non-intrusive temperature measurement of curved surface using laser interferometer and computer tomography},
  booktitle = {Proceedings of 13th International Symposium on Applications of Laser Techniques to Fluid Mechanics},
  year = 2006,
}

@inproceedings{CTT100395949,
  author = {伊東宏 and 佐藤勲 and 斉藤卓志 and 焼本和利},
  title = {ディスプレイ部材・micro-TASチップなど表面に微細パターンを有するプラスチック製品創成のための溶融微細転写法の開発},
  booktitle = {日本機械学会熱工学コンファレンス2005講演論文集},
  year = 2005,
}

@inproceedings{CTT100396954,
  author = {斉藤卓志 and 田尻篤史 and 伊藤浩志 and 安原鋭幸 and 佐藤勲 and 川口達也},
  title = {接触界面温度測定による樹脂熱物性推定手法の提案},
  booktitle = {成形加工シンポジア'05予稿集},
  year = 2005,
}

@inproceedings{CTT100396953,
  author = {風間邦彦 and 伊藤浩志 and 安原鋭幸 and 斉藤卓志 and 鞠谷雄士 and 國本栄起 and 小林博行},
  title = {微小プリズム表面を有する薄肉成形品の転写性と高次構造},
  booktitle = {成形加工シンポジア'05予稿集},
  year = 2005,
}

@inproceedings{CTT100395951,
  author = {斉藤卓志 and 佐藤勲 and 川口達也},
  title = {フォトクロミックダイを利用した選択レーザー加熱手法の検討},
  booktitle = {日本機械学会熱工学コンファレンス2005講演論文集},
  year = 2005,
}

@inproceedings{CTT100396961,
  author = {Takushi Saito and Atsushi Takata and Isao Satoh and Tatsuya Kawaguchi},
  title = {Visualization of Micro-scale Transcription during Hot Embossing Lithography Process},
  booktitle = {CD-ROM Proceedings of Asian Workshop on Polymer Processing 2005},
  year = 2005,
}

@inproceedings{CTT100395944,
  author = {伊藤浩志 and 風間邦彦 and 斉藤卓志 and 安原鋭幸 and 鞠谷雄士},
  title = {マイクロ薄肉射出成形における転写性と高次構造・物性評価},
  booktitle = {第54回高分子討論会予稿集},
  year = 2005,
}

@inproceedings{CTT100395945,
  author = {斉藤卓志 and 佐藤勲 and 川口達也},
  title = {タルク添加されたプロプロピレン製射出成形品におけるフローマーク発現機構の研究},
  booktitle = {第54回高分子討論会予稿集},
  year = 2005,
}

@inproceedings{CTT100396966,
  author = {Tatsuya Kawaguchi and Isao Satoh and Takushi Saito},
  title = {Surface Temperature Monitoring for the Cylindrical Melting Polymer Surface by Interferometric Computed Tomography},
  booktitle = {Proceedings of 4th World Congress on Industrial Process Tomography},
  year = 2005,
}

@inproceedings{CTT100396962,
  author = {岡田祐一 and 佐藤勲 and 齊藤卓志 and 川口達也},
  title = {赤外線パルスレーザー加熱による材料表面微細加工状況の実時間観察},
  booktitle = {第33回可視化情報シンポジウム予稿集},
  year = 2005,
}

@inproceedings{CTT100396963,
  author = {矢野友秀 and 川口達也 and 佐藤勲 and 齊藤卓志},
  title = {干渉CT法による円筒表面近傍の三次元温度分布測定},
  booktitle = {第33回可視化情報シンポジウム予稿集},
  year = 2005,
}

@inproceedings{CTT100395628,
  author = {井手慎之介 and 斉藤卓志 and 伊藤浩志 and 安原鋭幸 and 佐藤勲 and 川口達也},
  title = {薄肉射出成形品における対向ウェルド強度に関する研究},
  booktitle = {成形加工'05予稿集},
  year = 2005,
}

@inproceedings{CTT100395621,
  author = {伊藤浩志 and 羽田孔明 and 風間邦彦 and 安原鋭幸 and 斉藤卓志 and 鞠谷雄士},
  title = {マイクロスケール構造体を有する薄肉成形品の成形性と高次構造},
  booktitle = {成形加工'05予稿集},
  year = 2005,
}

@inproceedings{CTT100395940,
  author = {Toshiyuki Yasuhara and Hiroshi Aihara and Hiroshi Ito and Takushi Saito and Kazuki Enomoto and Naoto Ohtake},
  title = {Mechanical Properties of Carbon Nano-Fiber Reinforced Composites in Thin-wall Injection Molding},
  booktitle = {CD-ROM Proceedings of Polymer Processing Society 21th Annual Meeting},
  year = 2005,
}

@inproceedings{CTT100395939,
  author = {Hiroshi Ito and Takushi Saito and Toshiyuki Yasuhara and Takeshi Kikutani and Yoshitoshi Yamagiwa and Kazuo Muroi},
  title = {Evaluation of Material Properties and Processability Using Intelligent Analysis System for Micro Polymer Processing},
  booktitle = {CD-ROM Proceedings of Polymer Processing Society 21th Annual Meeting},
  year = 2005,
}

@inproceedings{CTT100395938,
  author = {Takushi Saito and Isao Satoh},
  title = {Novel Laser Welding Technique for Transparent Material using Phorochromic-dye},
  booktitle = {CD-ROM Proceedings of Polymer Processing Society 21th Annual Meeting},
  year = 2005,
}

@inproceedings{CTT100395937,
  author = {Hiroshi Ito and Yusuke Yagisawa and Takushi Saito and Toshiyuki Yasuhara and Takeshi Kikutani and Yoshitoshi Yamagiwa},
  title = {Fundamental Study on Structure Development in Thin-wall Injection Molded Products},
  booktitle = {CD-ROM Proceedings of Polymer Processing Society 21th Annual Meeting},
  year = 2005,
}

@inproceedings{CTT100395651,
  author = {齊藤卓志 and 佐藤勲 and 川口達也},
  title = {成形加工におけるふく射エネルギー利用の可能性},
  booktitle = {成形加工'05予稿集},
  year = 2005,
}

@inproceedings{CTT100395648,
  author = {伊藤浩志 and 安原鋭幸 and 斉藤卓志 and 鞠谷雄士 and 山極佳年},
  title = {マイクロポリマープロセスの成形性と構造物性に関する基礎研究},
  booktitle = {成形加工'05予稿集},
  year = 2005,
}

@inproceedings{CTT100395645,
  author = {宮部実 and 斉藤卓志 and 佐藤勲 and 川口達也},
  title = {フォトクロミックダイ添加による吸収係数制御を用いた透明材料のレーザー接合手法},
  booktitle = {成形加工'05予稿集},
  year = 2005,
}

@inproceedings{CTT100395644,
  author = {相原広志 and 安原鋭幸 and 伊藤浩志 and 斉藤卓志 and 榎本和城 and 大竹尚登},
  title = {樹脂基カーボンナノファイバー複合材料薄板の射出成形とその特性評価},
  booktitle = {成形加工'05予稿集},
  year = 2005,
}

@inproceedings{CTT100395640,
  author = {高田淳史 and 佐藤勲 and 斉藤卓志 and 川口達也 and 焼本数利 and 伊東宏},
  title = {ホットエンボス加工における微細形状転写機構の微視的検討},
  booktitle = {成形加工'05予稿集},
  year = 2005,
}

@inproceedings{CTT100395613,
  author = {島一元 and 佐藤勲 and 斉藤卓志 and 川口達也},
  title = {プラスチック材料に対する加熱粒子の粘着挙動に関する研究},
  booktitle = {第42回日本伝熱シンポジウム講演論文集},
  year = 2005,
}

@inproceedings{CTT100395600,
  author = {矢野友秀 and 川口達也 and 佐藤勲 and 斉藤卓志},
  title = {トモグラフィック干渉計を用いた曲面表面温度の非接触測定},
  booktitle = {第42回日本伝熱シンポジウム講演論文集},
  year = 2005,
}

@inproceedings{CTT100395942,
  author = {Hiroshi Ito and Toshiyuki Yasuhara and Takushi Saito and Takeshi Kikutani and Yoshitoshi Yamagiwa},
  title = {Structure Development in Thin-wall Injection Molding Process},
  booktitle = {Conference Proceedings of ANTEC'05},
  year = 2005,
}

@inproceedings{CTT100395943,
  author = {Hiroshi Ito and Takushi Saito and Toshiyuki Yasuhara and Takeshi Kikutani and Yoshitoshi Yamagiwa and Kazuo Muroi},
  title = {Evaluation of Material Properties and Processability Using The Intelligent Micro-scale Polymer Processing System},
  booktitle = {Conference Proceedings of ANTEC'05},
  year = 2005,
}

@inproceedings{CTT100504890,
  author = {Takushi Saito and Isao Satoh and Yoshiaki Togawa},
  title = {A Study on Flow-mark Generation Mechanism of Filler Filled PP Plates},
  booktitle = {CD-ROM Proceedings of Polymer Processing Society 20th Annual Meeting},
  year = 2004,
}

@inproceedings{CTT100616316,
  author = {福村光正 and 伏信一慶 and 齊藤卓志 and 佐藤 勲},
  title = {高分子材料のエキシマレーザアブレーション機構の検討（エキシマレーザ照射によるポリエチレンの紫外線吸収量の変化）},
  booktitle = {第38回日本伝熱シンポジウム講演論文集},
  year = 2001,
}

@misc{CTT100785497,
  author = {齊藤卓志},
  title = {温調機構の工夫による射出成形金型の省エネルギー化＜金型温調にヒートパイプと薄膜発熱体の適用を試みる＞},
  year = 2018,
}

@misc{CTT100590960,
  author = {斉藤卓志 and 川口達也 and 佐藤勲},
  title = {レーザー干渉コンピュータトモグラフィによる透明成形品内部の屈折率分布測定},
  year = 2009,
}

@misc{CTT100589075,
  author = {斉藤卓志},
  title = {実は奥深いナノインプリント技術},
  year = 2009,
}

@misc{CTT100396956,
  author = {齋藤義夫 and 齊藤卓志 and 原精一郎},
  title = {モノづくりと創造性教育（機械知能システム創造）},
  year = 2005,
}

@misc{CTT100395946,
  author = {佐藤勲 and 斉藤卓志},
  title = {伝熱工学から見たプラスチック射出成形金型の能動的温度制御技術},
  year = 2005,
}

@misc{CTT100594888,
  author = {TAKUSHI SAITO},
  title = {高分子射出成形品の高品位化に関する熱工学的研究},
  year = 1996,
}

@misc{CTT100573200,
  author = {佐藤勲 and 齊藤卓志 and 古田　真美 and 川口達也},
  title = {金型温度制御方法および金型温度制御装置},
  howpublished = {登録特許},
  year = 2012,
  month  = {},
  note   = {特願2006-122054(2006/04/26), 特開2007-290279(2007/11/08), 特許第4892724号(2012/01/06)}
}


@misc{CTT100573380,
  author = {齊藤卓志 and 佐藤勲 and 宮部　実},
  title = {材料のレーザー接合方法},
  howpublished = {公開特許},
  year = 2006,
  month  = {},
  note   = {特願2004-336026(2004/11/19), 特開2006-142655(2006/06/08)}
}




@phdthesis{CTT100594888,
  author = {TAKUSHI SAITO},
  title = {高分子射出成形品の高品位化に関する熱工学的研究},
  school = {東京工業大学},
  year = 1996,
}