@book{CTT100472635,
  author = {Masaaki Yokoyama and Yasuhiro Umehara},
  title = {An adaptive p-method for 3-D BEM analysis of elastostatic problems using quasi-Lagrange interpolation},
  publisher = {BOUNDARY ELEMENT TECHNIQUES},
  year = 2002,
}

@book{CTT100453968,
  author = {M. Yokoyama and J.J. Zhan},
  title = {An Adaptive p-Method for 2-D and 3-D BEM Analysis of Elastostatic Problems},
  publisher = {Advances in Boundary Element Techniques 2 (edited by M. Denda, M.H. Aliabadi and A. Charafi)},
  year = 2001,
}

@book{CTT100440581,
  author = {横山正明},
  title = {有限要素法},
  publisher = {ＰＴＣセミナー},
  year = 2000,
}

@book{CTT100435160,
  author = {川面恵司  横山正明  長谷川浩志},
  title = {最適化理論の基礎と応用（共著）},
  publisher = {コロナ社},
  year = 2000,
}

@book{CTT100497231,
  author = {横山正明},
  title = {高精度計算力学},
  publisher = {朝倉書店},
  year = 1998,
}

@book{CTT100497230,
  author = {横山正明　遠藤享　車周憲},
  title = {知識ベースCAD(共著)},
  publisher = {コロナ社},
  year = 1997,
}

@book{CTT100497012,
  author = {横山正明},
  title = {有限要素法1・2・3(訳)},
  publisher = {開発社},
  year = 1996,
}

@article{CTT100502964,
  author = {横山正明 and 鹿子嶋龍彦},
  title = {圧電素子活用によるマイクロ発電機構},
  journal = {山梨講演会講演論文集},
  year = 2004,
}

@article{CTT100502963,
  author = {横山正明 and 吉原隼平},
  title = {往復動形マイクロポンプ機構},
  journal = {山梨講演会講演論文集},
  year = 2004,
}

@article{CTT100502962,
  author = {横山正明 and 突合利哉},
  title = {ターボ形マイクロポンプ機構},
  journal = {山梨講演会講演論文集},
  year = 2004,
}

@article{CTT100502965,
  author = {横山正明},
  title = {有限要素法},
  journal = {PTCジャパンセミナー},
  year = 2004,
}

@article{CTT100488693,
  author = {横山正明 and 丸山哲也},
  title = {磁気によるマイクロアクチュエーション（第２報，永久磁石による基礎実験－その２）},
  journal = {山梨講演会講演論文集},
  year = 2003,
}

@article{CTT100488694,
  author = {横山正明 and 尾澤俊之},
  title = {ＮＵＲＢＳ立体に基く三次元形状モデリング},
  journal = {山梨講演会講演論文集},
  year = 2003,
}

@article{CTT100488695,
  author = {横山正明},
  title = {有限要素法},
  journal = {ＰＴＣジャパンセミナー},
  year = 2003,
}

@article{CTT100488691,
  author = {Masaaki Yokoyama and Yasuhiro Umehara},
  title = {A p-adaptive three dimensional boundary element method for elastostatic problems using quasi-Lagrange interpolation},
  journal = {Advances for Engineering Software},
  year = 2003,
}

@article{CTT100488692,
  author = {横山正明 and 丸山哲也},
  title = {磁気によるマイクロアクチュエーション（第１報，永久磁石による基礎実験）},
  journal = {日本機械学会東海支部第52期総会講演会講演論文集},
  year = 2003,
}

@article{CTT100472636,
  author = {岡崎博志 and 横山正明 and 高崎哲平},
  title = {熱電発電の基礎研究（第２報，基礎実験）},
  journal = {日本機械学会講演論文集},
  year = 2002,
}

@article{CTT100453969,
  author = {横山正明},
  title = {熱電発電の基礎研究（第１報，基礎的解析）},
  journal = {日本機械学会関西支部第76期定時総会講演会講演論文集},
  year = 2001,
}

@article{CTT100461435,
  author = {M. Yokoyama and A. Suguro},
  title = {An adaptive method for the determination of the order of element for aquiring the desired accuracy in 3D elastostatic FEM analysis},
  journal = {Advances in Engineering Software},
  year = 2001,
}

@article{CTT100453967,
  author = {M. Yokoyama and H. Amagai},
  title = {An adaptive method for the determination of the order of element for acquiring the desired accuracy in 2D elastostatic FEM analysis},
  journal = {Advances in Engineering Software},
  year = 2001,
}

@article{CTT100435164,
  author = {M. Yokoyama and T. Kanoh},
  title = {Accuracy estimation of the 3-D BEM analysis of elastostatic problems by the zooming method},
  journal = {Advances in Engineering Software},
  year = 2000,
}

@article{CTT100440500,
  author = {横山正明 and 小高ゆきえ},
  title = {ＮＵＲＢＳ曲面による高精度な曲面近似},
  journal = {山梨講演会講演論文集},
  year = 2000,
}

@article{CTT100440499,
  author = {横山正明 and 勝呂昭男},
  title = {アダプティブｐ法による三次元静弾性有限要素解析の精度評価},
  journal = {山梨講演会講演論文集},
  year = 2000,
}

@article{CTT100426586,
  author = {横山正明　塚口義之},
  title = {メッシュレス法による2次元静弾性解析の精度評価},
  journal = {山梨講演会講演論文集},
  year = 1999,
}

@article{CTT100426587,
  author = {横山正明　天海宏昭},
  title = {アダプティブｐ法による有限要素解析の精度評価},
  journal = {山梨講演会講演論文集},
  year = 1999,
}

@article{CTT100497233,
  author = {横山正明　展建軍},
  title = {Accuracy Improvement of BEM Analysis Based on Shape Error Reduction},
  journal = {Transaction of the Japan Society of Mechanical Engineers},
  year = 1998,
}

@article{CTT100497232,
  author = {Masaaki Yokoyama ; Jian Jun Zahn},
  title = {A P adaptive 3D BEM for acquiring the desired accuracy},
  journal = {Advances in Engineering Softwave},
  year = 1997,
}

@article{CTT100497013,
  author = {Masaaki Yokoyama ; Jian Jun Zahn},
  title = {An adaptive method for the determination of element degree for acquiring the desired accuracy in 2-D BEM},
  journal = {Advances in Engineering Softwave},
  year = 1997,
}

@article{CTT100497009,
  author = {MASAAKI YOKOYAMA},
  title = {Precise Fitting of Rational Bezior Surfaces on-to Free Surfaces},
  journal = {Transaction of the Japan Society of Mechanical Engineers},
  year = 1995,
}

@article{CTT100497010,
  author = {MASAAKI YOKOYAMA},
  title = {An Adaptive Method for the Determination of Element Degree for Acquiving the Desired Accuracy in Boundary Element Method},
  journal = {Transaction of the Japan Society of Mechanical Engineers},
  year = 1995,
}

@article{CTT100497011,
  author = {MASAAKI YOKOYAMA},
  title = {A Knowledgd-Based System for Suppocting Ihechamical CAD},
  journal = {Transaction of the Japan Society of Mechanical Engineers},
  year = 1994,
}

@article{CTT100497005,
  author = {MASAAKI YOKOYAMA},
  title = {Constrains Satisfaction Method for Networks of Design Variables and Constraints in Mechanical CAD},
  journal = {Transaction of the Japan Society of Mechanical Engineers},
  year = 1993,
}

@article{CTT100497006,
  author = {MASAAKI YOKOYAMA},
  title = {Accuracy Estimation in the Finite Element Analysis of Transverse Bending of Thin Flat Plates},
  journal = {Advances in Engineering Softwave},
  year = 1992,
}

@article{CTT100497008,
  author = {MASAAKI YOKOYAMA},
  title = {An Efficient Method for the Two-Dimensional Elastostatic Boundary Element Method},
  journal = {International Journal for Numerical Methods in Engineering},
  year = 1992,
}

@article{CTT100497227,
  author = {MASAAKI YOKOYAMA},
  title = {A Basic Study of the Accuracy Estimation of Structural Analysis by the Zooming Method(6th Report)},
  journal = {Transactions of the Japan Society of Mechanical Engineers},
  year = 1992,
}

@article{CTT100497007,
  author = {MASAAKI YOKOYAMA},
  title = {A Supporting Method for the Utilization of Various Reference Graphs and Tables in Mechanical CAD},
  journal = {Transaction of the Japan Society of Mechanical Engineers},
  year = 1992,
}

@article{CTT100497228,
  author = {MASAAKI YOKOYAMA},
  title = {A Basic Study of the Accuracy Estimation of the Finitp Element Method (3rd Report)},
  journal = {Transactions of the Japan Society of Mechanical Engineers},
  year = 1991,
}

@article{CTT100497229,
  author = {MASAAKI YOKOYAMA},
  title = {Error Analysis of the Bezier Approximation of Algebraic Surfaces},
  journal = {Transactions of the Japan Society of Mechanical Engineers},
  year = 1990,
}

@article{CTT100496998,
  author = {MASAAKI YOKOYAMA},
  title = {Automated Construction of Solid Objects with Curved Surfaces from Orthograpnic Three-View Drawings},
  journal = {Transactions of the Japan Society of Mechanical Engineers},
  year = 1990,
}

@article{CTT100496999,
  author = {MASAAKI YOKOYAMA},
  title = {A Basic Study of the Automated Generation of Machine Structures(4th Report)},
  journal = {Transactions of the Japan Society of Mechanical Engineers},
  year = 1989,
}

@article{CTT100497000,
  author = {MASAAKI YOKOYAMA},
  title = {Automated Mesh Division of Surfaces of Solid Objects Composed of Free-form Surfaces},
  journal = {Transactions of the Japan Society of Mechanical Engineers},
  year = 1989,
}

@article{CTT100497002,
  author = {MASAAKI YOKOYAMA},
  title = {A Contribution to the Study of Parallel Transmission of Data in Multi-Procession of Data in Multi-Procdssors System},
  journal = {Transactions of the Information Processing Society of Japan},
  year = 1986,
}

@article{CTT100497001,
  author = {MASAAKI YOKOYAMA},
  title = {Automated Computer Simulation of Various Physical Phenomena for the Application to Automated Machine Derign(2nd Report)},
  journal = {Transactions of the Japan Society of Mechanical Engineers},
  year = 1986,
}

@article{CTT100497003,
  author = {MASAAKI YOKOYAMA},
  title = {Convergence of Parallel Processing by Iterative Method},
  journal = {Transactions of the Information Processing Society of Japan},
  year = 1981,
}

@article{CTT100497004,
  author = {MASAAKI YOKOYAMA},
  title = {Direct Simulation of Engineering Problems with a Fast Away computer},
  journal = {Transactions of the Japan Society of Mechanical Engineers},
  year = 1978,
}

@misc{CTT100594376,
  author = {masaaki yokoyama},
  title = {平歯車の耐焼付強さ向上に関する基礎的研究},
  year = 1973,
}

@misc{CTT100596294,
  author = {masaaki yokoyama},
  title = {平歯車の耐ピッチング強さに関する研究},
  year = 1967,
}



@phdthesis{CTT100594376,
  author = {masaaki yokoyama},
  title = {平歯車の耐焼付強さ向上に関する基礎的研究},
  school = {東京工業大学},
  year = 1973,
}

@mastersthesis{CTT100596294,
  author = {masaaki yokoyama},
  title = {平歯車の耐ピッチング強さに関する研究},
  school = {東京工業大学},
  year = 1967,
}