@book{CTT100803843,
  author = {Chenyao Cao and Jiang Zhu and Tomohisa Tanaka},
  title = {Influence of Burnishing Process on Microstructure and Corrosion Properties of Mg Alloy AZ31},
  publisher = {Springer, Singapore},
  year = 2019,
}

@article{CTT100902938,
  author = {Hibiki Yamazaki and Jiang Zhu and Tomohisa Tanaka},
  title = {Study on the Surface Enhancement of Thin-Walled Metallic Materials Using a Novel Double-Side Burnishing Tool},
  journal = {International Journal of Automation Technology},
  year = 2023,
}

@article{CTT100882419,
  author = {JIANG ZHU and TOMOHISA TANAKA},
  title = {Surface modification of magnesium alloy using a new developed burnishing tool with constant force control},
  journal = {Journal of the Japan Society for Abrasive Technology},
  year = 2022,
}

@article{CTT100879966,
  author = {Yasunori Sakai and Ryo Kinouchi and Yuta Toki and Tomohisa Tanaka},
  title = {Novel non-traditional mechanical drilling process with squeeze motion},
  journal = {Materials Letters},
  year = 2021,
}

@article{CTT100845410,
  author = {Jiang Zhu and Da Xie and Tomohisa Tanaka},
  title = {Recognition of Multi-Intersecting Features of Boundary Representation CAD Model},
  journal = {Journal of Physics: Conference Series},
  year = 2021,
}

@article{CTT100879952,
  author = {Shigeru Aoki and Yasunori Sakai and Tomohisa Tanaka},
  title = {A Fundamental Experiment for Micro Ultrasonic Knurling Technology Creating High Precision Texture on Sliding Surface},
  journal = {Information},
  year = 2020,
}

@article{CTT100879953,
  author = {Shigeru Aoki and Yasunori Sakai and Tomohisa Tanaka},
  title = {Study on Application of Ultrasonic Vibration to Manufacturing (Examples of Application and Future Aspect)},
  journal = {Information},
  year = 2020,
}

@article{CTT100819961,
  author = {Chenyao Cao and Jiang Zhu and Tomohisa Tanaka and Dinh Ngoc Pham},
  title = {Investigation of Corrosion Resistance Enhancement for Biodegradable Magnesium Alloy by Ball Burnishing Process},
  journal = {International Journal of Automation Technology},
  year = 2020,
}

@article{CTT100803846,
  author = {Chenyao Cao and Jiang Zhu and Tomohisa Tanaka and Fang-Jung Shiou and Shunichi Sawada and Hayato Yoshioka},
  title = {Ball Burnishing of Mg Alloy Using a Newly Developed Burnishing Tool with On-machine Force Control},
  journal = {International Journal of Automation Technology},
  year = 2019,
}

@article{CTT100700214,
  author = {Muslimin and Jiang ZHU and Hayato YOSHIOKA and Tomohisa TANAKA and Yoshio SAITO},
  title = {Study on plane feature extraction in registration of laser scanning data sets for reverse engineering},
  journal = {Journal of Advanced Mechanical Design, Systems, and Manufacturing},
  year = 2015,
}

@article{CTT100699107,
  author = {Tomohisa Tanaka and Shinya Oishi and Jiang Zhu and Yoshio Saito},
  title = {Study on the mechanism of laser forming to the thin stainless-steel wire},
  journal = {International Journal of Nanomanufacturing},
  year = 2015,
}

@article{CTT100696389,
  author = {Jiang ZHU and Masato KATO and Tomohisa TANAKA and Hayato YOSHIOKA and Yoshio SAITO},
  title = {Graph based automatic process planning system for multi-tasking machine},
  journal = {Journal of Advanced Mechanical Design, Systems, and Manufacturing},
  year = 2015,
}

@article{CTT100684117,
  author = {Yasunori SAKAI and Tomohisa TANAKA and Hayato YOSHIOKA and Jiang ZHU and Masaomi TSUTSUMI and Yoshio SAITO},
  title = {Influence of nonlinear spring behavior of friction on dynamic characteristics of a rolling guideway},
  journal = {Journal of Advanced Mechanical Design, Systems, and Manufacturing},
  year = 2015,
}

@article{CTT100677369,
  author = {Nitin Sharma and Jiang Zhu and Tomohisa Tanaka and Yoshio Saito},
  title = {Feature Extraction Based 3D Model Registration for Surface Finish Quality Evaluation},
  journal = {Advanced Materials Research},
  year = 2014,
}

@article{CTT100677370,
  author = {Jiang Zhu and Tomohisa Tanaka and Yoshio Saito},
  title = {Research on 3D Model Processing Technologies in the Application of Freeform Surface Machining},
  journal = {Advanced Materials Research},
  year = 2014,
}

@article{CTT100664707,
  author = {JIANG Zhu and AKIMITSU Hozumi and TOMOHISA Tanaka and Yoshio Saito},
  title = {High Efficiency Tool Path Generation for Freeform Surface Machining Based on NURBS Subdivision},
  journal = {Key Engineering Materials},
  year = 2014,
}

@article{CTT100684266,
  author = {Yasunori Sakai and TOMOHISA TANAKA and Masaomi Tsutsumi},
  title = {Influence of the Excitation Force Amplitude on Vibration Characteristics of a Linear Rolling Bearing},
  journal = {Journal of the Japan Society for Precision Engineering},
  year = 2014,
}

@article{CTT100664709,
  author = {Yuanrui Zhang and Shigenobu Nagase and Jiang Zhu and Tomohisa Tanaka and Yoshio Saito},
  title = {Positioning calibration of a parallel mechanism worktable with 6-DOF},
  journal = {Key Engineering Materials},
  year = 2014,
}

@article{CTT100663544,
  author = {TOMOHISA TANAKA and TSUNAMITSU NAKAHARA},
  title = {	A Stochastic Analysis of Plastic Area on Rough Surface Contact in Relation with Transition from Mild to Severe Wear},
  journal = {Tribology online},
  year = 2013,
}

@article{CTT100645620,
  author = {Yuanrui Zhang and Jiang Zhu and Tomohisa Tanaka and Yoshio Saito},
  title = {Measurement of Movement Error and Its Compensation for 6-DOF Parallel Mechanism Worktable},
  journal = {Key Egineering Materials (Emerging Technology in Precision Engineering XIV)},
  year = 2012,
}

@article{CTT100641002,
  author = {Shunsuke Oike and Tomohisa Tanaka and Jiang Zhu and Yoshio Saito},
  title = {Robust Production Scheduling Using Autonomous Distributed Systems},
  journal = {Key Engineering Materials},
  year = 2012,
}

@article{CTT100641001,
  author = {Kohei Ogura and Jiang Zhu and Tomohisa Tanaka and Yoshio Saito},
  title = {Characteristics of Excimer Laser Ablation for Three Dimensional Machining of PMMA},
  journal = {Key Engineering Materials},
  year = 2012,
}

@article{CTT100634441,
  author = {Xiaoyi Wang and Jing Chen and Jiang Zhu and Yoshio Saito and Tomohisa Tanaka},
  title = {Registration of 3-D Shape with Free-form Surface Using Imageware and Genetic Algorithm},
  journal = {Advanced Materials Research},
  year = 2012,
}

@article{CTT100630821,
  author = {Jiang Zhu and Tomohisa TANAKA and Yoshio SAITO and Ryuta TANABE and Masaaki TAKENAKA and Toru FUKAMI},
  title = {On-machine Measuring and Machining of Freeform Surface Using a Polar-coordinate Desktop Machine Tool},
  journal = {Journal of Advanced Mechanical Design, Systems, and Manufacturing},
  year = 2011,
}

@article{CTT100626163,
  author = {Jiang Zhu and Yuichi Takekuma and Tomohisa Tanaka and Yoshio Saito},
  title = {3D Model Registration Based on Feature Extraction},
  journal = {Advanced Materials Research},
  year = 2011,
}

@article{CTT100620032,
  author = {Jiang Zhu and Tomohisa Tanaka and Yoshio Saito and Lining Sun},
  title = {Study on virtual environment-based simulation, control and teleoperation in the application of robotic machining and manipulation},
  journal = {International Journal of Design Engineering},
  year = 2011,
}

@article{CTT100611694,
  author = {Tomohisa Tanaka and Ryo Suzuki and Jiang Zhu and Yoshio Saito},
  title = {Excimer Laser 3D Machining Based on Irradiation Pulse Number Control},
  journal = {Journal of Advanced Mechanical Design, Systems, and Manufacturing},
  year = 2010,
}

@article{CTT100609833,
  author = {Yuusuke Narabu and JIANG ZHU and TOMOHISA TANAKA and YOSHIO SAITO},
  title = {Automatic Manufacturing Feature Extraction of CAD Models for Machining},
  journal = {Key Engineering Materials},
  year = 2010,
}

@article{CTT100609835,
  author = {TOMOHISA TANAKA and Masahiro Komori and JIANG ZHU and YOSHIO SAITO},
  title = {Development of Flexible Worktable for Endmilling Based on Parallel Mechanism},
  journal = {Key Engineering Materials},
  year = 2010,
}

@article{CTT100609834,
  author = {JIANG ZHU and Keisuke Nomura and TOMOHISA TANAKA and YOSHIO SAITO},
  title = {Tool Path Planning Assist System for Freeform Surface Machining},
  journal = {Key Engineering Materials},
  year = 2010,
}

@article{CTT100565220,
  author = {JIANG ZHU and Ryo Suzuki and TOMOHISA TANAKA and YOSHIO SAITO},
  title = {Automatic Tool Path Generation for Robot Integrated Surface Sculpturing System},
  journal = {Journal of Advanced Mechanical Design, Systems, and Manufacturing},
  year = 2008,
}

@article{CTT100556173,
  author = {Jiang Zhu and Tomohisa Tanaka and Yoshio Saito},
  title = {A 3D rough-cut model generation algorithm based on multi-resolution mesh for sculptured surface machining},
  journal = {Journal of Advanced Mechanical Design, Systems, and Manufacturing},
  year = 2007,
}

@article{CTT100556172,
  author = {Jiang Zhu and Tomohisa Tanaka and Yoshio Saito},
  title = {Multi-resolution mesh for sculptured surface machining},
  journal = {Journal of Solid Mechanics and Materials Engineering},
  year = 2007,
}

@article{CTT100533405,
  author = {Jiang Zhu and Tomohisa Tanaka and Yoshio Saito},
  title = {Multi-resolution mesh for sculptured surface machining},
  journal = {Journal of Solid Mechanics and Materials Engineering},
  year = 2007,
}

@article{CTT100521983,
  author = {Tomohisa TANAKA and Yoshio SAITO},
  title = {On the Mechanism of the Hot Wire Cutting of Polystyrene Foam (Cutting Characteristics of the Dwelling Wire)},
  journal = {Transactions of the Japan Society of Mechanical Engineers (C)},
  year = 2006,
}

@article{CTT100542122,
  author = {Tomohisa TANAKA and Yoshihiro IIDA and Yoshio SAITO},
  title = {Trial Manufacturing of MQL Oil Mist Density Sensing System for Environmentally Friendly Machine Tools},
  journal = {Transactions of the Japan Society of Mechanical Engineers (C)},
  year = 2006,
}

@article{CTT100389525,
  author = {Javad AKBARI and Shinzo ENOMOTO and Kazuhiko KATO and Yoshiyuki YAKABE and Tomohisa TANAKA and Yoshio SAITO},
  title = {An Experimental Investigation on EDM Process Using a Desktop Machine Tool},
  journal = {Proceedings of ICoPE2003/2004},
  year = 2004,
}

@article{CTT100389094,
  author = {菅谷健二郎 and 田中智久 and 齋藤義夫},
  title = {Study on Excimer Laser Ablation for Polymer},
  journal = {The 5th Manufacturing & Machine Tool Conference},
  year = 2004,
}

@article{CTT100389093,
  author = {ナフィス・アハマッド and 田中智久 and 齋藤義夫},
  title = {Optimization of Turning Process Parameters by Genetic Algorithm (GA) Considering the Effect of Tool Wear},
  journal = {The 5th Manufacturing & Machine Tool Conference},
  year = 2004,
}

@article{CTT100496126,
  author = {深見徹 and 田中智久 and Akbari Javad and 斎藤義夫},
  title = {弾性変形拡張方式を利用したホーニングツールの開発},
  journal = {2003年度精密工学会秋季大会学術講演会講演論文集},
  year = 2003,
}

@article{CTT100496125,
  author = {J. Akbari and M.Imamura and T. Tanaka and Y. Saito},
  title = {Ultrasonic Tactile Sensor for Robot Gripper},
  journal = {Proceedings of the International Conference  on Leading Edge Manufacturing in 21st Century, Niigata},
  year = 2003,
}

@article{CTT100389017,
  author = {上原匠 and 田中智久 and 京極啓史 and 中原綱光},
  title = {摩耗モード遷移モデルの実験的検証},
  journal = {トライボロジー会議予稿集 東京 2003-5},
  year = 2003,
}

@article{CTT100496134,
  author = {小山田圭吾 and 田中智久 and Akbari Javad and 斎藤義夫},
  title = {工作機械の環境への2次的影響},
  journal = {2002年度精密工学会春季大会学術講演会講演論文集},
  year = 2002,
}

@article{CTT100496132,
  author = {黄 士元 and 田中智久 and Akbari Javad and 斎藤義夫},
  title = {画像情報に基づく多面体形状の自動認識に関する研究},
  journal = {2002年度精密工学会春季大会学術講演会講演論文集},
  year = 2002,
}

@article{CTT100496131,
  author = {今村光広 and 田中智久 and Akbari Javad and 斎藤義夫},
  title = {超音波センサ組み込みソフトフィンガによる把持状態の検出},
  journal = {2002年度精密工学会秋季大会学術講演会講演論文集},
  year = 2002,
}

@article{CTT100496130,
  author = {芦塚正博 and 田中智久 and Akbari Javad and 斎藤義夫},
  title = {画像情報に基づく多面体形状の自動認識に関する研究(第2報) ―輪郭内部頂点を用いたパターンの定性記述―},
  journal = {2002年度精密工学会秋季大会学術講演会講演論文集},
  year = 2002,
}

@article{CTT100496129,
  author = {牟田憲太郎 and 田中智久 and Akbari Javad and 斎藤義夫},
  title = {発泡スチロールの熱線加工メカニズムに関する研究(第2報) ―熱伝達･輻射を考慮した解析―},
  journal = {2002年度精密工学会秋季大会学術講演会講演論文集},
  year = 2002,
}

@article{CTT100496128,
  author = {吉柳一郎 and 田中智久 and Akbari Javad and 斎藤義夫},
  title = {多軸ロボットによる自由曲面生成アルゴリズムの構築},
  journal = {2002年度精密工学会秋季大会学術講演会講演論文集},
  year = 2002,
}

@article{CTT100496127,
  author = {矢ヶ部善幸 and 山田洋維祐 and 田中智久 and アキバリ ジャワド and 斎藤義夫},
  title = {PC制御デスクトップマシンによる放電加工機},
  journal = {日本機械学会第4回生産加工･工作機械部門講演会講演論文集},
  year = 2002,
}

@article{CTT100496138,
  author = {坂谷内篤 and 田中智久 and Javad Akbari and 斎藤義夫},
  title = {ロボットの把持動作に関する学習制御},
  journal = {2002年度精密工学会春季大会学術講演会講演論文集},
  year = 2002,
}

@article{CTT100496139,
  author = {歌田英司 and 田中智久 and Javad Akbari and 斎藤義夫},
  title = {超音波接触判定センサを持つロケータの開発},
  journal = {2002年度精密工学会春季大会学術講演会講演論文集},
  year = 2002,
}

@article{CTT100496140,
  author = {Javad Akbari and Eiji Utada and Tomohisa Tanaka and Yoshio Saito},
  title = {Sensor Integrated Locator for Intelligent Fixture},
  journal = {Proceeding of 6th International Conference on Mechatronics Technology},
  year = 2002,
}

@article{CTT100496137,
  author = {杉田芳史 and 田中智久 and Javad Akbari and 斎藤義夫},
  title = {自由曲面形状の創成と計測に関する研究},
  journal = {2002年度精密工学会春季大会学術講演会講演論文集},
  year = 2002,
}

@article{CTT100496136,
  author = {前田陽介 and 田中智久 and Akbari Javad and 斎藤義夫},
  title = {工作機械用高速主軸の軸受隙間の最適はめあい精度に関する研究},
  journal = {2002年度精密工学会春季大会学術講演会講演論文集},
  year = 2002,
}

@article{CTT100496135,
  author = {山中暁 and 田中智久 and Akbari Javad and 斎藤義夫},
  title = {環境対応型工作機械用ミストセンサの開発},
  journal = {2002年度精密工学会春季大会学術講演会講演論文集},
  year = 2002,
}

@article{CTT100496133,
  author = {牟田憲太郎 and 田中智久 and Akbari Javad and 斎藤義夫},
  title = {発泡スチロールの熱線加工メカニズムに関する研究},
  journal = {2002年度精密工学会春季大会学術講演会講演論文集},
  year = 2002,
}

@article{CTT100389016,
  author = {TOMOHISA TANAKA},
  title = {The Effect of Slip on Critical Contact Pressure Causing Wear Mode Transition Based on BURWELL-STRANG's Concept -Analysis by SLip Line Field Theory-},
  journal = {Journal of JAST},
  year = 2001,
}

@article{CTT100389019,
  author = {TOMOHISA TANAKA},
  title = {微小すべり下のマイルドからシビア摩耗への遷移判別 -凝着観察による-},
  journal = {トライボロジー会議予稿集 東京 2001-5},
  year = 2001,
}

@article{CTT100491007,
  author = {TOMOHISA TANAKA},
  title = {Burwell-Strangによる軽－重摩耗遷移の概念に基づく遷移臨界圧力の統計的解析},
  journal = {トライボロジスト},
  year = 2000,
}

@article{CTT100389015,
  author = {TOMOHISA TANAKA},
  title = {An Estimation of Threshold of Mild and Severe Wear Based on Burwell-Strang's Concept by ELastic-Plastic Analysis on Rough Surface Contact},
  journal = {Proceedings of the International Tribology Conference Nagasaki, 2000},
  year = 2000,
}

@article{CTT100389018,
  author = {TOMOHISA TANAKA},
  title = {カム-フォロワ間の熱的潤滑解析},
  journal = {日本機械学会第74期通常総会講演論文集},
  year = 1997,
}

@inproceedings{CTT100902936,
  author = {Ryoukou Kamiya and JIANG ZHU and TOMOHISA TANAKA},
  title = {Burnishing of thin plate material using a rolling ball point tool},
  booktitle = {2023年度砥粒加工学会学術講演会講演論文集},
  year = 2023,
}

@inproceedings{CTT100888679,
  author = {Kazuaki Tokumo and JIANG ZHU and TOMOHISA TANAKA},
  title = {High precision NC machining based on 3D measurement of position and posture in workpiece attachment process},
  booktitle = {日本機械学会生産システム部門研究発表講演会2023講演論文集},
  year = 2023,
}

@inproceedings{CTT100884114,
  author = {hibiki yamazaki and jiang zhu and tomohisa tanaka},
  title = {Verification of the effectiveness of DSB tool in increasing the strength of thin plate material parts},
  booktitle = {Proceeding of the 19th International Conference on Precision Engineering},
  year = 2022,
}

@inproceedings{CTT100883812,
  author = {Hibiki Yamazaki and JIANG ZHU and TOMOHISA TANAKA},
  title = {Burnishing tool capable of surface modification of thin plate material},
  booktitle = {Proceeding of the IMEC2022},
  year = 2022,
}

@inproceedings{CTT100867995,
  author = {Hibiki Yamazaki and JIANG ZHU and TOMOHISA TANAKA},
  title = {Evaluation of the burnishing process of sheet metal materials by double side burnishing tool},
  booktitle = {2022年度精密工学会春季大会学術講演会論文集},
  year = 2022,
}

@inproceedings{CTT100867997,
  author = {Masaya Morinaga and TOMOHISA TANAKA and JIANG ZHU and 大谷祐輔},
  title = {Development of a complex groove grinding path derivation algorithm for the manuifacture of high performance end mills},
  booktitle = {生産システム部門研究発表講演会2022講演論文集},
  year = 2022,
}

@inproceedings{CTT100865756,
  author = {hibiki yamazaki and jiang zhu and tomohisa tanaka},
  title = {Development of a novel burnishing tool for surface modificatio of thin-walled materials},
  booktitle = {Proceeding of the 10th International Conference on Leading Edge Manufacturing in 21st Century (LEM21)},
  year = 2021,
}

@inproceedings{CTT100860868,
  author = {Muslimin and Katerina Mukti and Hasvienda M. Ridlwan and M. Sholeh and Ade Sumpena and Jiang Zhu and Hayato Yoshioka and Tomohisa Tanaka},
  title = {Direct NC Toolpath Generation from 3D Point Cloud Datasets},
  booktitle = {Proceedings of the 9th Annual Southeast Asian International Seminar (ASAIS 2020)},
  year = 2021,
}

@inproceedings{CTT100845413,
  author = {Masaya Morinaga and TOMOHISA TANAKA and JIANG ZHU and 大谷祐輔},
  title = {Algorithm for calculate desired machining parameters of grinding wheel for end mill groove},
  booktitle = {生産システム部門研究発表講演会2021 講演論文集},
  year = 2021,
}

@inproceedings{CTT100833680,
  author = {Da Xie and Jiang Zhu and Tomohisa Tanaka},
  title = {Graph-based Feature Recognition and Combination Method for Automatic Process Planning System},
  booktitle = {Proceedings of JSME 2020 Conference on Leading Edge Manufacturing/Material and Processing},
  year = 2020,
}

@inproceedings{CTT100813712,
  author = {Jiang Zhu and Chenyao Cao and Tomohisa Tanaka},
  title = {Corrosion Resistance Enhancement of Biodegradable Magnesium by Ball Burnishing Processing},
  booktitle = {},
  year = 2019,
}

@inproceedings{CTT100803842,
  author = {Chenyao Cao and Jiang Zhu and Tomohisa Tanaka},
  title = {Influence of Burnishing Process on Microstructure and Corrosion Properties of Mg Alloy AZ31},
  booktitle = {},
  year = 2019,
}

@inproceedings{CTT100879963,
  author = {青木 繁 and Yasunori Sakai and TOMOHISA TANAKA and Shihao Liu},
  title = {高精度テクスチャを創生する超音波応用転写加工技術の開発:（基礎的実験）},
  booktitle = {},
  year = 2019,
}

@inproceedings{CTT100792224,
  author = {Chenyao Cao and JIANG ZHU and TOMOHISA TANAKA and Yasunori Sakai},
  title = {Influence of processing condition on surface modification effect of Mg alloys by ball burnishing process},
  booktitle = {2019年度精密工学会春季大会学術講演会講演論文集},
  year = 2019,
}

@inproceedings{CTT100879960,
  author = {青木 繁 and Yasunori Sakai and TOMOHISA TANAKA},
  title = {超音波振動応用加工例と塑性加工への応用の展望},
  booktitle = {},
  year = 2019,
}

@inproceedings{CTT100792225,
  author = {Yasunori Sakai and TOMOHISA TANAKA and Shunnya Kobayashi and JIANG ZHU},
  title = {異方剛性設計を施したパッシブダンパP-DACSを内包する構造物の振動応答},
  booktitle = {},
  year = 2019,
}

@inproceedings{CTT100792221,
  author = {Shunnya Kobayashi and Yasunori Sakai and TOMOHISA TANAKA and JIANG ZHU},
  title = {Development of Structure Integrated Passive Damper (P-DACS)},
  booktitle = {Proceeding of the 18th International Machine Tool Engineers' Conference},
  year = 2018,
}

@inproceedings{CTT100792222,
  author = {Chenyao Cao and JIANG ZHU and TOMOHISA TANAKA and Yasunori Sakai},
  title = {Modification of Metal Structure Based on Burnishing Processing},
  booktitle = {Proceeding of the 18th International Machine Tool Engineers' Conference},
  year = 2018,
}

@inproceedings{CTT100768494,
  author = {Jingyou Wu and TOMOHISA TANAKA and JIANG ZHU and Yasunori Sakai},
  title = {Laser coloring on titanium by controlling oxide film formation mode},
  booktitle = {2018年度精密工学会春季大会学術講演会講演論文集},
  year = 2018,
}

@inproceedings{CTT100768495,
  author = {Takumi Kobayashi and Yasunori Sakai and TOMOHISA TANAKA and JIANG ZHU},
  title = {Influence of geometrical parameters of passive-damper with anisotropic composite structure (P-DACS) on its dynamical characteristics},
  booktitle = {2018年度精密工学会春季大会学術講演会講演論文集},
  year = 2018,
}

@inproceedings{CTT100768493,
  author = {JIANG ZHU and Akira Tajima and TOMOHISA TANAKA and Hayato Yoshioka},
  title = {Study on the accuracy improvement for laser forming processing of micro-wire},
  booktitle = {Proceeding of The 9th International Conference on Leading Edge Manufacturing in 21st Century},
  year = 2017,
}

@inproceedings{CTT100737651,
  author = {Yasunori Sakai and TOMOHISA TANAKA and JIANG ZHU},
  title = {金属と高分子を複合 した異方構造を有す るパッシブダンパ （P-DACS）の制振 性能に及ぼすダンパ 形状及び高分子物性 の影響},
  booktitle = {2017年度精密工学会春季大会学術講演会講演論文集},
  year = 2017,
}

@inproceedings{CTT100737648,
  author = {Shunsuke Hotta and Hayato Yoshioka and Jiang Zhu and Tomohisa Tanaka},
  title = {The Influence of Laser Irradiation Parameters to the Surface Condition and the Color of Titanium},
  booktitle = {2017年度精密工学会春季大会学術講演会講演論文集},
  year = 2017,
}

@inproceedings{CTT100737653,
  author = {Satoshi Inoue and Yasunori Sakai and TOMOHISA TANAKA and Hayato Yoshioka and JIANG ZHU and 星出薫 and 古澤竜二},
  title = {Elucidation of Contact State of Rolling Elements Used for Carriage of Rolling Guideway in Static State},
  booktitle = {2017年度精密工学会春季大会学術講演会講演論文集},
  year = 2017,
}

@inproceedings{CTT100734601,
  author = {Shunsuke Hotta and Jiang Zhu and Tomohisa Tanaka and Hayato Yoshioka},
  title = {Titanium Coloring Machining by Laser Irradiation},
  booktitle = {Proceedings of the 17th International Machine Tool Engineers` Conference},
  year = 2016,
}

@inproceedings{CTT100734599,
  author = {Yasunori Sakai and So Fukasawa and Jiang Zhu and Hayato Yoshioka and Tomohisa Tanaka and Kaoru Hoshide and Ryuji Furusawa},
  title = {Influence of Designing Parameters on Vibration Damping of Rolling Guideway},
  booktitle = {Proceeding of 16th International Conference on Precision Engineering},
  year = 2016,
}

@inproceedings{CTT100734603,
  author = {Jiang Zhu and Shunsuke Hotta and Hayato Yoshioka and Tomohisa Tanaka},
  title = {Study on the titanium oxide layer generation mechanism by YVO4 laser irradiation on titanium},
  booktitle = {Proceeding of the 8th Japan-Taiwan workshop on mechanical engineering and aerospace},
  year = 2016,
}

@inproceedings{CTT100734600,
  author = {Shunsuke Hotta and Jiang Zhu and Hayato Yoshioka and Tomohisa Tanaka},
  title = {Study on the mechanism of titanium oxide layer growth by laser irradiation on titanium},
  booktitle = {Proceeding of 16th International Conference on Precision Engineering},
  year = 2016,
}

@inproceedings{CTT100734598,
  author = {Yasunori Sakai and TOMOHISA TANAKA and JIANG ZHU},
  title = {Influence of filler condition on damping capacity of synthetic resin},
  booktitle = {第11回生産加工・工作機械部門講演会 講演論文集},
  year = 2016,
}

@inproceedings{CTT100757982,
  author = {Muslimin and Zhu, J. and Yoshioka, H. and Tanaka, T.},
  title = {Automatic segmentation and feature identification of laser scanning point cloud data for reverse engineering},
  booktitle = {Proceedings of International Symposium on Flexible Automation},
  year = 2016,
}

@inproceedings{CTT100702697,
  author = {Akira Tajima and Hayato Yoshioka and JIANG ZHU and TOMOHISA TANAKA},
  title = {Improvement of the processing precision in the laser forming for metal wire},
  booktitle = {2016年度精密工学会春季大会学術講演会講演論文集},
  year = 2016,
}

@inproceedings{CTT100702695,
  author = {Yasunori Sakai and JIANG ZHU and Hayato Yoshioka and TOMOHISA TANAKA},
  title = {Influence of Lubricating oil on nonlinear frequency response characteristic of rolling guideway},
  booktitle = {2016年度精密工学会春季大会学術講演会講演論文集},
  year = 2016,
}

@inproceedings{CTT100702590,
  author = {Syunsuke Hotta and Hayato Yoshioka and JIANG ZHU and TOMOHISA TANAKA},
  title = {Coloring of Titanium by using YVO4 Laser -Relation between laser parameters and coloring-},
  booktitle = {日本機械学会関東支部第22期総会講演会講演論文集},
  year = 2016,
}

@inproceedings{CTT100702589,
  author = {Sou Fukasawa and Yasunori Sakai and JIANG ZHU and Hayato Yoshioka and TOMOHISA TANAKA and 星出 薫 and 古澤竜二},
  title = {Influence of Contact Condition of Rolling Elements on Damping Characteristics of Rolling Guideway},
  booktitle = {日本機械学会関東支部第22期総会講演会講演論文集},
  year = 2016,
}

@inproceedings{CTT100702588,
  author = {Yasunori Sakai and Sou Fukasawa and JIANG ZHU and Hayato Yoshioka and TOMOHISA TANAKA and 星出 薫 and 古澤竜二},
  title = {Development of Measuring Apparatus for Contact Damping of Rolling Guideway},
  booktitle = {日本機械学会関東支部第22期総会講演会講演論文集},
  year = 2016,
}

@inproceedings{CTT100698665,
  author = {Muslimin and Jiang Zhu and Hayato Yoshioka and Tomohisa Tanaka and Yoshio Saito},
  title = {The Utilization of Feature Extraction in Registration Method of Laser Data Sets in Reverse Engineering of Fidelity and Precision Part},
  booktitle = {Proceeding of the 8th International Conference on Leading Edge Manufacturing in 21st Century},
  year = 2015,
}

@inproceedings{CTT100698664,
  author = {Tomohisa Tanaka and Syo Harada and Jiang Zhu and Hayato Yoshioka and Yoshio Saito},
  title = {Fundamental Study for Control of Hue and Brightness in the Laser Coloring},
  booktitle = {Proceeding of the 8th International Conference on Leading Edge Manufacturing in 21st Century},
  year = 2015,
}

@inproceedings{CTT100696387,
  author = {Jiang Zhu and Masato Kato and Hayato Yoshioka and Yoshio Saito and Tomohisa Tanaka},
  title = {Research on Feature Recognition from STEP model for Automatic Process Planning of Multi-tasking Machine},
  booktitle = {Proceeding of the 6th International Conference of Asian Society for Precision Engineering and Nanotechnology (ASPEN2015)},
  year = 2015,
}

@inproceedings{CTT100696719,
  author = {Yasunori Sakai and JIANG ZHU and Hayato Yoshioka and TOMOHISA TANAKA},
  title = {有限要素法を用いたローラガイドの鉛直及び横方向剛性の同定},
  booktitle = {},
  year = 2015,
}

@inproceedings{CTT100684116,
  author = {Muslimin and Jiang Zhu and Hayato Yoshioka and Tomohisa Tanaka and Yoshio Saito},
  title = {A New Method for Registration Laser Data Sets and CMM Data Sets in Reverse Engineering of Accurate Part},
  booktitle = {Proceeding of Spring Annual Meeting of the Japan Society for Procession Engineering 2015},
  year = 2015,
}

@inproceedings{CTT100684114,
  author = {Saurabh Bhide and Jiang Zhu and Hayato Yoshioka and Tomohisa Tanaka and Yoshio Saito},
  title = {Calculation of Intersection Points between Triangulated Mesh and Point Cloud Data},
  booktitle = {Proceeding of Spring Annual Meeting of the Japan Society for Procession Engineering 2015},
  year = 2015,
}

@inproceedings{CTT100684112,
  author = {Mikiya Hara and Jiang Zhu and Hayato Yoshioka and Yoshio Saito and Tomohisa Tanaka},
  title = {Study on Effect of Cutting Parameter on Accuracy of Surface in the Milling of Polytetrafluoroethylene},
  booktitle = {Proceeding of Spring Annual Meeting of the Japan Society for Procession Engineering 2015},
  year = 2015,
}

@inproceedings{CTT100684105,
  author = {Masato Kato and Jiang Zhu and Hayato Yoshioka and Yoshio Saito and Tomohisa Tanaka},
  title = {Graph based automatic process planning system for multi-tasking machine},
  booktitle = {Proceeding of Spring Annual Meeting of the Japan Society for Procession Engineering 2015},
  year = 2015,
}

@inproceedings{CTT100684102,
  author = {Shigenobu Nagase and Jiang Zhu and Hayato Yoshioka and Yoshio Saito and Tomohisa Tanaka},
  title = {Efficiency of the free-form surface machining with optimum tool-path for each segment},
  booktitle = {Proceeding of Spring Annual Meeting of the Japan Society for Procession Engineering 2015},
  year = 2015,
}

@inproceedings{CTT100684100,
  author = {Yasunori Sakai and Hayato Yoshioka and Jiang Zhu and Yoshio Saito and Tomohisa Tanaka},
  title = {Analysis of Nonlinear Friction Induced Vibration of Rolling Guideway by Using Complex Spring},
  booktitle = {Proceeding of Spring Annual Meeting of the Japan Society for Procession Engineering 2015},
  year = 2015,
}

@inproceedings{CTT100684096,
  author = {Huiwei Gao and Jiang Zhu and Hayato Yoshioka and Yoshio Saito and Tomohisa Tanaka},
  title = {Construction of Flexible Production Scheduling System Using Autonomous Distributed Systems},
  booktitle = {Proceeding of Spring Annual Meeting of the Japan Society for Procession Engineering 2015},
  year = 2015,
}

@inproceedings{CTT100684081,
  author = {Sho Harada and JIANG ZHU and TOMOHISA TANAKA and Hayato Yoshioka and YOSHIO SAITO},
  title = {Research on Titanium Coloring using Laser Irradiation -Improvement repeatability in coloring marking and realization of wide color space},
  booktitle = {Proceesing of JSME Manufacturing Systems Division Conference 2015},
  year = 2015,
}

@inproceedings{CTT100684086,
  author = {yuanrui zhang and JIANG ZHU and Hayato Yoshioka and YOSHIO SAITO and TOMOHISA TANAKA},
  title = {Study on the error compensation and accuracy improvement of 6-DOF parallel mechanism worktable},
  booktitle = {Proceeding of the 16th International Machine Tool Engineers` Conference},
  year = 2014,
}

@inproceedings{CTT100684265,
  author = {Yasunori SAKAI and Jiang Zhu and Tomohisa Tanaka and Hayato Yoshioka and Yoshio Saito},
  title = {Influence of Hysteresis Behavior of Friction on Dynamic Characteristics of Rolling Guideway},
  booktitle = {Proceedings of MECHATRONICS 2014},
  year = 2014,
}

@inproceedings{CTT100684089,
  author = {Yasunori Sakai and JIANG ZHU and TOMOHISA TANAKA and Hayato Yoshioka and YOSHIO SAITO},
  title = {Influence of Excitation Force on Damping of Rolling Guideway in Feed and Pitch Direction},
  booktitle = {Proceeding of the 16th International Machine Tool Engineers` Conference},
  year = 2014,
}

@inproceedings{CTT100677367,
  author = {Mikiya HARA and Jiang ZHU and Tomohisa TANAKA and Yoshio SAITO},
  title = {Study on Effect of Cutting Parameter on Cutting Resistance in the Milling of Polytetrafluoroethylene},
  booktitle = {２０１４年度砥粒加工学会学術講演会論文集},
  year = 2014,
}

@inproceedings{CTT100668347,
  author = {Yasunori Sakai and Toshiki Hanaoka and JIANG ZHU and YOSHIO SAITO and TOMOHISA TANAKA},
  title = {加振力振幅が直動転がり案内の動特性に及ぼす影響},
  booktitle = {2014年度精密工学会春季大会学術講演会講演論文集},
  year = 2014,
}

@inproceedings{CTT100668346,
  author = {Nitin Sharma and Jiang Zhu and Tomohisa Tanaka and Yoshio Saito},
  title = {3D Model Registration Based on Feature Extraction Using Segmentation},
  booktitle = {2014年度精密工学会春季大会学術講演会講演論文集},
  year = 2014,
}

@inproceedings{CTT100668345,
  author = {Yuki Koike and JIANG ZHU and TOMOHISA TANAKA and YOSHIO SAITO},
  title = {LSI製造プロセスにおける搬送経路に基づくマルチクラスタシステムの効率化},
  booktitle = {2014年度精密工学会春季大会学術講演会講演論文集},
  year = 2014,
}

@inproceedings{CTT100668349,
  author = {Naoki Maeda and JIANG ZHU and TOMOHISA TANAKA and YOSHIO SAITO},
  title = {Fabrication of three-dimensional laminate of thin metal wire using a laser},
  booktitle = {日本機械学会生産システム部門研究発表講演会2014講演論文集},
  year = 2014,
}

@inproceedings{CTT100668348,
  author = {Shinya Oishi and TOMOHISA TANAKA and JIANG ZHU and YOSHIO SAITO},
  title = {Study on Laser Forming Mechanism of Stainless Wire},
  booktitle = {日本機械学会生産システム部門研究発表講演会2014講演論文集},
  year = 2014,
}

@inproceedings{CTT100664708,
  author = {Xu Zhou and Tomohisa Tanaka and Jiang Zhu and Yoshio Saito},
  title = {Titanium Coloring Mechanism through Laser Irradiation},
  booktitle = {Proceeding of the 5th International Conference of Asian Society for Precision Engineering and Nanotechnology},
  year = 2013,
}

@inproceedings{CTT100664710,
  author = {Tomohisa Tanaka and Shinya Oishi and Jiang Zhu and Yoshio Saito},
  title = {Study on the Laser Forming of Thin Stainless-steel Wire},
  booktitle = {Proceeding of the 5th International Conference of Asian Society for Precision Engineering and Nanotechnology},
  year = 2013,
}

@inproceedings{CTT100664706,
  author = {Jiang ZHU and Saori MUTO and Tomohisa Tanaka and Yoshio SAITO},
  title = {Development of Automatic Machining Process Deciding System Based on 3D-Model},
  booktitle = {Proceeding of the 7th International Conference on Leading Edge Manufacturing in 21st Century (LEM21)},
  year = 2013,
}

@inproceedings{CTT100661084,
  author = {Mikiya Hara and Jiang Zhu and Tomohisa Tanaka and Yoshio Saito},
  title = {Study on Effect of Cutting Parameter on Surface Roughness in the Milling of Polytetrafluoroethylene},
  booktitle = {ABTEC2013砥粒加工学会学術講演会講演論文集},
  year = 2013,
}

@inproceedings{CTT100651354,
  author = {Saori Muto and Jiang Zhu and Tomohisa Tanaka and Yoshio Saito},
  title = {Development of the Automatic Machining Process Deciding System Based on 3D-model},
  booktitle = {2013年度精密工学会春季大会学術講演会講演論文集},
  year = 2013,
}

@inproceedings{CTT100651298,
  author = {Osama Abdelaal and Jiang Zhu and Tomohisa Tanaka and Saied Darwish and Yoshio Saito},
  title = {Additive Manufacturing of Custom-made Hip Implants},
  booktitle = {Proceeding of The Japan Society of Mechanical Engineers, Manufacturing Systems Division Conference 2013},
  year = 2013,
}

@inproceedings{CTT100651290,
  author = {Shinya Oishi and Tomohisa Tanaka and Jiang Zhu and Yoshio Saito},
  title = {Study on Laser Forming for Stainless Wire},
  booktitle = {Proceeding of The Japan Society of Mechanical Engineers, Manufacturing Systems Division Conference 2013},
  year = 2013,
}

@inproceedings{CTT100651345,
  author = {Akimitsu Hozumi and Jiang Zhu and Tomohisa Tanaka and Yoshio Saito},
  title = {High Efficiency Tool Path Generation Method for NURBS Surface Machining Based on NURBS Surface Subdivision},
  booktitle = {2013年度精密工学会春季大会学術講演会講演論文集},
  year = 2013,
}

@inproceedings{CTT100651334,
  author = {Masaomi Hasegawa and Jiang Zhu and Tomohisa Tanaka and Yoshio Saito},
  title = {Validation of Rough Machining Process for Multi-axis Machine Tools by Using Multi-resolution Mesh},
  booktitle = {2013年度精密工学会春季大会学術講演会講演論文集},
  year = 2013,
}

@inproceedings{CTT100645589,
  author = {Yuanrui Zhang and Jiang Zhu and Tomohisa Tanaka and Yoshio Saito},
  title = {Research on the error compensation and machining accuracy about the 6-DOF parallel mechanism table},
  booktitle = {Proceeding of the 15th International Machine Tool Engineers` Conference},
  year = 2012,
}

@inproceedings{CTT100645590,
  author = {Xu Zhou and Jiang Zhu and Tomohisa Tanaka and Yoshio Saito},
  title = {Research on the Structural Color Appearance of Titanium by Laser Irradiation},
  booktitle = {Proceeding of the 15th International Machine Tool Engineers` Conference},
  year = 2012,
}

@inproceedings{CTT100645065,
  author = {Xu Zhou and Jiang Zhu and Tomohisa Tanaka and Yoshio Saito},
  title = {Study on Coloring Mechanism of Oxide Layers on Titanium by Laser Irradiating},
  booktitle = {Proceeding of the 9th Manufacturing & Machine Tool Conference},
  year = 2012,
}

@inproceedings{CTT100645066,
  author = {Jiang Zhu and Jumpei Goto and Tomohisa Tanaka and Yoshio Saito},
  title = {Tool Path Generation for Layered Manufacturing by Wire Electric Discharge Machining (WEDM)},
  booktitle = {Proceeding of the 9th Manufacturing & Machine Tool Conference},
  year = 2012,
}

@inproceedings{CTT100634445,
  author = {Yuanrui Zhang and Jiaotao Wu and Jiang Zhu and Tomohisa Tanaka and Yoshio Saito},
  title = {Analysis of error factors in the worktable of 6-DOF parallel mechanism},
  booktitle = {Proceeding of Spring Annual Meeting of the Japan Society for Procession Engineering 2012},
  year = 2012,
}

@inproceedings{CTT100634442,
  author = {Yuya Iitsuka and Jiang Zhu and Tomohisa Tanaka and Yoshio Saito},
  title = {Study on modeling of wire structures by laser forming},
  booktitle = {Proceeding of Spring Annual Meeting of the Japan Society for Procession Engineering 2012},
  year = 2012,
}

@inproceedings{CTT100634443,
  author = {Haruka Tsukasaki and Jiang Zhu and Tomohisa Tanaka and Yoshio Saito},
  title = {Study on molten laminating of the metal resin combined molding using the laser},
  booktitle = {Proceeding of Spring Annual Meeting of the Japan Society for Procession Engineering 2012},
  year = 2012,
}

@inproceedings{CTT100634444,
  author = {Shota Sekiguchi and Jiang Zhu and Tomohisa Tanaka and Yoshio Saito},
  title = {Processing System Construction for 8-axis Redundant Robot},
  booktitle = {Proceeding of Spring Annual Meeting of the Japan Society for Procession Engineering 2012},
  year = 2012,
}

@inproceedings{CTT100634447,
  author = {Masaomi Hasegawa and Jiang Zhu and TOMOHISA TANAKA and YOSHIO SAITO},
  title = {Validation of rough machining process for turning center by using multi-resolution mesh},
  booktitle = {Proceding of JSME Manufacturing Systems Division Conference 2012},
  year = 2012,
}

@inproceedings{CTT100645619,
  author = {Jiang Zhu and Tomohisa Tanaka and Yoshio Saito},
  title = {Tool Path Generation for 3D Freeform Surface Machining Based on the Feature of CAD Model},
  booktitle = {},
  year = 2012,
}

@inproceedings{CTT100631593,
  author = {Jiang Zhu and Yusuke Narabu and Tomohisa Tanaka and Yoshio Saito},
  title = {Manufacturing Feature Extraction System of 3D-Model for Process Planning},
  booktitle = {Proceeding of The 6th International Conference on Leading Edge Manufacturing in 21st Century (LEM21)},
  year = 2011,
}

@inproceedings{CTT100631596,
  author = {Takahiro Kubo and Jiang Zhu and Tomohisa Tanaka and Yoshio Saito},
  title = {The Contact Part Measurement on Rough Surface by Optical Methodology in High Load Region},
  booktitle = {Proceeding of The 6th International Conference on Leading Edge Manufacturing in 21st Century (LEM21)},
  year = 2011,
}

@inproceedings{CTT100643289,
  author = {B. Leban and M. Pau and M. Ishida and T. Tanaka},
  title = {On the Reliability and Robustness of a Non-Invasive Experimental Method for the Measurements of Real Area of Contact between Rough Surfaces},
  booktitle = {},
  year = 2011,
}

@inproceedings{CTT100643284,
  author = {Tsunamitsu Nakahara and Tomohisa Tanaka},
  title = {A Stochastic Analysis of Plastic Area on Rough Surface Contact in Relation with Transition from Mild to Severe Wear},
  booktitle = {International Tribology Conference, Hiroshima 2011},
  year = 2011,
}

@inproceedings{CTT100628705,
  author = {Akimitsu Hozumi and Jiang Zhu and Tomohisa Tanaka and Yoshio Saito},
  title = {Development of Processing Support System for 6-axis WEDM},
  booktitle = {Mechanical Engineering Congress, 2011 Japan},
  year = 2011,
}

@inproceedings{CTT100628704,
  author = {Haruka Tsukasaki and Jiang Zhu and Tomohisa Tanaka and Yoshio Saito},
  title = {Development of the Support-free RP Device with 5-axis Control},
  booktitle = {Mechanical Engineering Congress, 2011 Japan},
  year = 2011,
}

@inproceedings{CTT100628711,
  author = {Shunsuke Oike and Tomohisa Tanaka and Jiang Zhu and Yoshio Saito},
  title = {Robust Production Scheduling Using Autonomous Distributed Systems},
  booktitle = {Mechanical Engineering Congress, 2011 Japan},
  year = 2011,
}

@inproceedings{CTT100628709,
  author = {Shota Sekiguchi and Jiang Zhu and Tomohisa Tanaka and Yoshio Saito},
  title = {Toolpath Generation for 3D Processing by 8-axis Redundant Robot System},
  booktitle = {Mechanical Engineering Congress, 2011 Japan},
  year = 2011,
}

@inproceedings{CTT100628703,
  author = {Saori Muto and Jiang Zhu and Tomohisa Tanaka and Yoshio Saito},
  title = {Fabrication and Evaluation of 3D Shape by Rapid Prototyping},
  booktitle = {Mechanical Engineering Congress, 2011 Japan},
  year = 2011,
}

@inproceedings{CTT100628707,
  author = {Shinya Kinoshita and Jiang Zhu and Tomohisa Tanaka and Yoshio Saito},
  title = {Research on Appearance of Structural Color by Laser Irradiation to Titanium},
  booktitle = {Mechanical Engineering Congress, 2011 Japan},
  year = 2011,
}

@inproceedings{CTT100628706,
  author = {Taku Nishio and Jiang Zhu and Tomohisa Tanaka and Yoshio Saito},
  title = {Fundamental Research to Construct the Model Made from Heterogeneous Materials by Using Laser},
  booktitle = {Mechanical Engineering Congress, 2011 Japan},
  year = 2011,
}

@inproceedings{CTT100628702,
  author = {Yuya Iitsuka and Jiang Zhu and Tomohisa Tanaka and Yoshio Saito},
  title = {Wire Structure Forming by Laser Forming},
  booktitle = {Mechanical Engineering Congress, 2011 Japan},
  year = 2011,
}

@inproceedings{CTT100631779,
  author = {Asim Al-Sofi and Yoshio Saito and Tomohisa Tanaka and Jiang Zhu},
  title = {Generating the Measurement Points Based on Finishing NC Data},
  booktitle = {Proceeding of 2011 IEEE International Conference on Mechatronics (ICM)},
  year = 2011,
}

@inproceedings{CTT100619339,
  author = {Kohei Ogura and TOMOHISA TANAKA and JIANG ZHU and YOSHIO SAITO},
  title = {Characteristics of excimer laser ablation for three dimensional machining of PMMA},
  booktitle = {Proceeding of Spring Annual Meeting of the Japan Society for Procession Engineering 2011},
  year = 2011,
}

@inproceedings{CTT100619340,
  author = {Yusuke Narabu and JIANG ZHU and TOMOHISA TANAKA and YOSHIO SAITO},
  title = {Development of the automatic machining method deciding system based on 3D-model},
  booktitle = {Proceeding of Spring Annual Meeting of the Japan Society for Procession Engineering 2011},
  year = 2011,
}

@inproceedings{CTT100619341,
  author = {Yuichi Takekuma and JIANG ZHU and TOMOHISA TANAKA and YOSHIO SAITO},
  title = {Construction of shape inspection system by comparing three-dimensional models},
  booktitle = {Proceeding of Spring Annual Meeting of the Japan Society for Procession Engineering 2011},
  year = 2011,
}

@inproceedings{CTT100619342,
  author = {Takahiro Kubo and JIANG ZHU and TOMOHISA TANAKA and YOSHIO SAITO},
  title = {High load wear-out evaluation of characteristics by direct contact point observation in rough contact area},
  booktitle = {Proceeding of Spring Annual Meeting of the Japan Society for Procession Engineering 2011},
  year = 2011,
}

@inproceedings{CTT100619395,
  author = {Jiang Zhu and Akira Yanagisawa and Tomohisa Tanaka and Yoshio Saito},
  title = {Development of Tool Path Generation System for Polar-coordinate Desktop Machine Tool(PDMT)},
  booktitle = {Proceeding of the 6th International Conference on MicroManufacturing ICOMM/2011},
  year = 2011,
}

@inproceedings{CTT100619713,
  author = {Shunsuke Oike and TOMOHISA TANAKA and JIANG ZHU and YOSHIO SAITO},
  title = {Robust Production Scheduling Using Autonomous Distributed Systems},
  booktitle = {Proceding of JSME Manufacturing Systems Division Conference 2011},
  year = 2011,
}

@inproceedings{CTT100615871,
  author = {Jiang Zhu and Keisuke Nomura and Tomohisa Tanaka and Yoshio Saito},
  title = {Rough Machining Tool Path Generation for Multi-axis Turning Center Based on Multi-resolution Mesh},
  booktitle = {Proceeding of the 14th International Conference on Mechatronics Technology},
  year = 2010,
}

@inproceedings{CTT100614418,
  author = {Shota Sekiguchi and JIANG ZHU and TOMOHISA TANAKA and YOSHIO SAITO},
  title = {Freeform Surface Machining and Measurement by 8-axis Robot System},
  booktitle = {Proceedings of the 14th International Machine Tool Egineers' Conference},
  year = 2010,
}

@inproceedings{CTT100617994,
  author = {Kengo Shintaku and JIANG ZHU and TOMOHISA TANAKA and YOSHIO SAITO},
  title = {Accuracy Maintenance Using the Measured Data of Already Processed Part After Workpiece Position is Changed},
  booktitle = {Proceeding of the 8th Manufacturing & Machine Tool Conference},
  year = 2010,
}

@inproceedings{CTT100612497,
  author = {Koji Nishiyama and JIANG ZHU and TOMOHISA TANAKA and YOSHIO SAITO},
  title = {Tool Path Generation for 2.5-Axis Contour Machining},
  booktitle = {Proceeding of Autumn Annual Meeting of the Japan Society for Procession Engineering 2010},
  year = 2010,
}

@inproceedings{CTT100611645,
  author = {Takahiro Kubo and JIANG ZHU and TOMOHISA TANAKA and YOSHIO SAITO},
  title = {Plastic Deformation State Distinction in Rough Contact Surface Under Heavy Load Condition},
  booktitle = {Proceeding of Abrasive Technoloogy Conference 2010},
  year = 2010,
}

@inproceedings{CTT100601111,
  author = {Keisuke Nomura and JIANG ZHU and TOMOHISA TANAKA and YOSHIO SAITO},
  title = {High-efficiency Processing for Turning Center by Using Multi-resolution Mesh},
  booktitle = {Proceeding of Spring Annual Meeting of the Japan Society for Procession Engineering 2010},
  year = 2010,
}

@inproceedings{CTT100600908,
  author = {Yuusuke Narabu and JIANG ZHU and TOMOHISA TANAKA and YOSHIO SAITO},
  title = {Automatic Manufacturing Feature Extraction of CAD Models for Machining},
  booktitle = {日本機械学会北陸信越支部第47期総会・講演会講演論文集},
  year = 2010,
}

@inproceedings{CTT100601112,
  author = {Masahiro Komori and JIANG ZHU and TOMOHISA TANAKA and YOSHIO SAITO},
  title = {Development of Work Table System with 6-DOF Parallel Mechanism for Machine Tools},
  booktitle = {Proceeding of Spring Annual Meeting of the Japan Society for Procession Engineering 2010},
  year = 2010,
}

@inproceedings{CTT100593347,
  author = {Zuanshi Haranud and Jiang Zhu and Tomohisa Tanaka and Yoshio Saito},
  title = {Optimal Tool Path Generation Method for Freeform Surface Machining},
  booktitle = {Proceedings of the 5th International Conference on Leading Edge Manufacturing in 21st Century (LEM21)},
  year = 2009,
}

@inproceedings{CTT100593349,
  author = {Jiang Zhu and Ryota Tanabe and Tomohisa Tanaka and Yoshio Saito},
  title = {Polar-coordinate Desktop Machine Tool, an Intelligent Digital 3D Duplicator},
  booktitle = {Proceedings of the 5th International Conference on Leading Edge Manufacturing in 21st Century (LEM21)},
  year = 2009,
}

@inproceedings{CTT100593350,
  author = {Ryo Suzuki and Jiang Zhu and Tomohisa Tanaka and Yoshio Saito},
  title = {Excimer Laser 3D Machining Based on Irradiation Pulse Number Control},
  booktitle = {Proceedings of the 5th International Conference on Leading Edge Manufacturing in 21st Century (LEM21)},
  year = 2009,
}

@inproceedings{CTT100593348,
  author = {Xiaoyi Wang and Quanxian Wang and Yoshio Saito and Jiang Zhu and Tomohisa Tanaka},
  title = {Reorganizable Assembly Model and Its Reorganizing Approach for Assembly Planning},
  booktitle = {Proceedings of the 5th International Conference on Leading Edge Manufacturing in 21st Century (LEM21)},
  year = 2009,
}

@inproceedings{CTT100592662,
  author = {Yusuke Narabu and Zuanshi Haranud and Jiang Zhu and Tomohisa Tanaka and Yoshio Saito},
  title = {Optimal Tool-path Selection for Milling Free-form Surface Based on the Form of Surface},
  booktitle = {Proceeding of 3rd International Conference of Asian Society for Precision Engineering and Nanotechnology},
  year = 2009,
}

@inproceedings{CTT100592664,
  author = {Masahiro Komori and Jiang Zhu and Tomohisa Tanaka and Yoshio Saito},
  title = {Development of Work Table System with 6-DOF Parallel Mechanism for Machine Tools},
  booktitle = {Proceeding of 3rd International Conference of Asian Society for Precision Engineering and Nanotechnology},
  year = 2009,
}

@inproceedings{CTT100592000,
  author = {Tomohisa TANAKA and Bruno LEBAN and Takahiro KUBO and Yoshio SAITO and Massimiliano PAU and Hua CHEN and Makoto ISHIDA},
  title = {Assessment of Accuracy of Real Contact Area Bbservation in Contact between Rough Surfaces},
  booktitle = {Proc. of 8th International Conference on Contact Mechanics and Wear of Rail/Wheel Systems},
  year = 2009,
}

@inproceedings{CTT100589861,
  author = {Jun Suzuki and Jiang Zhu and Tomohisa Tanaka and Yoshio Saito},
  title = {Compact Machine Tool with Working Space in Shell},
  booktitle = {Proceeding of Mechanical Engineering Congress 2009},
  year = 2009,
}

@inproceedings{CTT100589860,
  author = {Yuichi Takekuma and Jiang Zhu and Tomohisa Tanaka and Yoshio Saito},
  title = {Study on Mold Casting of Ceramics},
  booktitle = {Proceeding of Autumn Annual Meeting of the Japan Society for Procession Engineering 2009},
  year = 2009,
}

@inproceedings{CTT100589411,
  author = {Masahiro Komori and Yoshio Saito and Tomohisa Tanaka and Jiang Zhu},
  title = {Development of Work Table with 6-DOF Parallel Mechanism for Machine Tools},
  booktitle = {Abrasive Technoloogy Conference 2009},
  year = 2009,
}

@inproceedings{CTT100589858,
  author = {Xiaoyi Wang and Jiang Zhu and Tomohisa Tanaka and Yoshio Saito},
  title = {A New Assembly Model Capable of Reorganizing Assembly Structure},
  booktitle = {Proceeding of Autumn Annual Meeting of the Japan Society for Procession Engineering 2009},
  year = 2009,
}

@inproceedings{CTT100589859,
  author = {Takahiro Kubo and Jiang Zhu and Tomohisa Tanaka and Yoshio Saito},
  title = {Study on the accuracy improvement of real contact part distinction for the rough surface},
  booktitle = {Proceeding of Autumn Annual Meeting of the Japan Society for Procession Engineering 2009},
  year = 2009,
}

@inproceedings{CTT100589862,
  author = {Yusuke Narabu and Zuanshi Haranud and Jiang Zhu and Tomohisa Tanaka and Yoshio Saito},
  title = {Optimal Tool-path Selection for Milling Free-form Surface Based on the Form of Surface},
  booktitle = {Proceeding of Mechanical Engineering Congress 2009},
  year = 2009,
}

@inproceedings{CTT100571833,
  author = {Masataka Tanase and Jiang Zhu and Tomohisa Tanaka and Yoshio Saito},
  title = {Non-contact 3-D Measurement Path Generation for Multi-axis Robot System},
  booktitle = {Proceeding of 2009 Spring Annual Meeting of the Japan Society for Procession Engineering},
  year = 2009,
}

@inproceedings{CTT100571834,
  author = {Ryota Tanabe and Jiang Zhu and Tomohisa Tanaka and Yoshio Saito},
  title = {Measurement and machining of 3D shape by using polar coordiante desktop machine tool},
  booktitle = {Proceeding of 2009 Spring Annual Meeting of the Japan Society for Procession Engineering},
  year = 2009,
}

@inproceedings{CTT100571435,
  author = {Fei Feng and JIANG ZHU and TOMOHISA TANAKA and YOSHIO SAITO},
  title = {Tool path generation for the 3D model`s machining by multi-axis processing system},
  booktitle = {Proceeding of JSME Manufacturing Systems Division Conference 2009},
  year = 2009,
}

@inproceedings{CTT100571835,
  author = {Ryo Suzuki and Jiang Zhu and Tomohisa Tanaka and Yoshio Saito},
  title = {Free-form Surface Machining of Polymeric Material Based on Laser Ablation with Irradiation Pulse Number Control},
  booktitle = {Proceeding of 2009 Spring Annual Meeting of the Japan Society for Procession Engineering},
  year = 2009,
}

@inproceedings{CTT100566328,
  author = {Ryuta Tanabe and Jiang Zhu and Tomohisa Tanaka and Yoshio Saito},
  title = {Measurement and machining using polar coordiante desktop machine tool},
  booktitle = {Proceedings of the 13th International Machine Tool Engineers' Conference},
  year = 2008,
}

@inproceedings{CTT100566327,
  author = {Masataka Tanase and Jiang Zhu and Tomohisa Tanaka and Yoshio Saito},
  title = {Freeform surface sculpturing and measurement system based on 8-axis robot system},
  booktitle = {Proceedings of the 13th International Machine Tool Engineers' Conference},
  year = 2008,
}

@inproceedings{CTT100566627,
  author = {JIANG ZHU and Zuanshi Haranud and TOMOHISA TANAKA and YOSHIO SAITO},
  title = {Study on Feature Area Extraction for Freeform Surface Based on Mesh Simplification},
  booktitle = {Proceeding of the 7th Manufacturing & Machine Tool Conference},
  year = 2008,
}

@inproceedings{CTT100565219,
  author = {JIANG ZHU and TOMOHISA TANAKA and YOSHIO SAITO and Lining Sun},
  title = {Study on the Virtual Reality Based Interface for Robot Integrated Machining and Manipulation},
  booktitle = {Proceeding of the 13th Internation Conference on Machine Design and Production},
  year = 2008,
}

@inproceedings{CTT100592810,
  author = {Shunsuke Oike and TOMOHISA TANAKA and YOSHIO SAITO},
  title = {Flexible Manufacturing Scheduling},
  booktitle = {Proceeding of the 13th Internation Conference on Machine Design and Production},
  year = 2008,
}

@inproceedings{CTT100565455,
  author = {Ryuta Tanabe and Jiang Zhu and Tomohisa Tanaka and Yoshio Saito},
  title = {Machining Using Polar Coordinate Desktop Machine Tool},
  booktitle = {Proceeding of Autumn Annual Meeting of the Japan Society for Procession Engineering},
  year = 2008,
}

@inproceedings{CTT100565454,
  author = {Masataka Tanase and Jiang Zhu and Tomohisa Tanaka and Yoshio Saito},
  title = {Non-contact Three Dimensional Measurement Using Multi-axis Robot System},
  booktitle = {Proceeding of Autumn Annual Meeting of the Japan Society for Procession Engineering},
  year = 2008,
}

@inproceedings{CTT100565340,
  author = {Keisuke Nomura and Jiang Zhu and Tomohisa Tanaka and Yoshio Saito},
  title = {Research of Improvement of 8-axis Processing System},
  booktitle = {Mechanical Engineering Congress, 2008 Japan (MECJ-08)},
  year = 2008,
}

@inproceedings{CTT100562126,
  author = {JIANG ZHU and TOMOHISA TANAKA and YOSHIO SAITO},
  title = {Rough Machining Model Generation for Freeform Surface Machining},
  booktitle = {Proceeding of JSME Manufacturing System Division Conference 2008},
  year = 2008,
}

@inproceedings{CTT100562127,
  author = {Zuanshi Haranud and JIANG ZHU and TOMOHISA TANAKA and YOSHIO SAITO},
  title = {Study on Freeform Surface Tool Path Generation Method},
  booktitle = {Proceeding of JSME Manufacturing System Division Conference 2008},
  year = 2008,
}

@inproceedings{CTT100562698,
  author = {Kazuki HONDA and Yoshio SAITO and Tomohisa TANAKA},
  title = {Molding process for CFRP using High-Frequency Induction Heating},
  booktitle = {2008年度 精密工学会春季大会学術講演会 講演論文集},
  year = 2008,
}

@inproceedings{CTT100556212,
  author = {Ryo Suzuki and Jiang Zhu and Tomohisa Tanaka and Yoshio Saito},
  title = {8-axis Surface Sculpturing System by Heated Cutting Tools},
  booktitle = {Proceeding of ICCES’08(International Conference on Computational & Experimental Engineering and Science)},
  year = 2008,
}

@inproceedings{CTT100562695,
  author = {Atsushi KAWAMATA and Yoshio SAITO and Tomohisa TANAKA},
  title = {Research on miniaturization of machine tool by unified structure},
  booktitle = {2008年度 精密工学会春季大会学術講演会 講演論文集},
  year = 2008,
}

@inproceedings{CTT100562696,
  author = {Junichi HADA and Tomohisa TANAKA and Yoshio SAITO},
  title = {Systematization of Combined Machining Process},
  booktitle = {2008年度 精密工学会春季大会学術講演会 講演論文集},
  year = 2008,
}

@inproceedings{CTT100562700,
  author = {Ryo Tanabe and Yoshio Saito and Tomohisa Tanaka},
  title = {Measurement and Machining by using Polar Coordinate Desktop Machine Tool},
  booktitle = {Proceeding of ICCES’08(International Conference on Computational & Experimental Engineering and Science)},
  year = 2008,
}

@inproceedings{CTT100562699,
  author = {Zuanshi Haranud and Tomohisa Tanaka and Yoshio Saito},
  title = {Tool Path Generation Method for Freeform Surface Machining},
  booktitle = {Proceeding of ICCES’08(International Conference on Computational & Experimental Engineering and Science)},
  year = 2008,
}

@inproceedings{CTT100610616,
  author = {Guanglei Liu and Tomohisa Tanaka and Yoshio Saito},
  title = {A Study on Miniature Automatic Tool Changer for Desktop Machine Tool},
  booktitle = {Proceedings of the 5th International Conference on Leading Edge Manufacturing in 21st Century (LEM21)},
  year = 2007,
}

@inproceedings{CTT100556211,
  author = {Jiang Zhu and Ryo Suzuki and Tomohisa Tanaka and Yoshio Saito},
  title = {Automatic Tool Path Generation for Robot Integrated Surface Sculpturing System},
  booktitle = {Proceeding of The 4th International Conference on Leading Edge Manufacturing in 21st Century, LEM21},
  year = 2007,
}

@inproceedings{CTT100544167,
  author = {Tomohisa Tanaka and Bruno Leban and Yoshio Saito and Hua Chen and Makoto Ishida},
  title = {Characteristics of the Full Refl ection Contact Area Observation in Contactbetween Spherical Convexity and Flat Surface},
  booktitle = {Proceedings of JAST Tribology Conference Saga, September 2007},
  year = 2007,
}

@inproceedings{CTT100544172,
  author = {Masahiro Komori and Yoshio Saito and Tomohisa Tanaka},
  title = {Characteristic of Linear-Actuated Parallel Mechanism},
  booktitle = {2007年度 精密工学会秋季大会学術講演会 講演論文集},
  year = 2007,
}

@inproceedings{CTT100544175,
  author = {Junichi Hada and TOMOHISA TANAKA and YOSHIO SAITO},
  title = {Systematization of Machining Process for Pocket Shape Using CAM System},
  booktitle = {2007年度 精密工学会秋季大会学術講演会 講演論文集},
  year = 2007,
}

@inproceedings{CTT100544174,
  author = {Atsushi Kawamata and YOSHIO SAITO and TOMOHISA TANAKA},
  title = {Research on miniaturization of machine tool by unified structure},
  booktitle = {2007年度 精密工学会秋季大会学術講演会 講演論文集},
  year = 2007,
}

@inproceedings{CTT100544173,
  author = {Zuanshi Haranud and Tomohisa Tanaka and Yoshio Saito},
  title = {Study on constant scallop height tool path generation for freeform surface machining},
  booktitle = {2007年度 精密工学会秋季大会学術講演会 講演論文集},
  year = 2007,
}

@inproceedings{CTT100544166,
  author = {Tomohisa Tanaka and Tsunamitsu Nakahara},
  title = {Theoretical Study on the Effect of Running-In on Severity of Rough Surface Contact},
  booktitle = {Proceedings of JAST Tribology Conference Saga, September 2007},
  year = 2007,
}

@inproceedings{CTT100544165,
  author = {Tomohisa TANAKA and Noriko TAKASHITA and Bruno LEBAN and Yoshio SAITO},
  title = {Observation of the Real Contact Area in Sliding Contact between Primitive Bump and Flat Surface},
  booktitle = {2007年度 砥粒加工学会学術講演会 講演論文集},
  year = 2007,
}

@inproceedings{CTT100544164,
  author = {TOMOHISA TANAKA and YUICHIRO KIMURA and YOSHIO SAITO and TAKAYUKI KUMITA and YASUHIRO KOMAI},
  title = {Study on Practical Implementation of the Honing Tools for Machining Centers},
  booktitle = {2007年度砥粒加工学会学術講演会講演論文集},
  year = 2007,
}

@inproceedings{CTT100556210,
  author = {Jiang Zhu and Ryo Suzuki and Tomohisa Tanaka and Yoshio Saito},
  title = {A Surface Sculpturing System Based on 8-Axis Robot},
  booktitle = {Proceeding of International Conference on Advanced Design & Manufacturing, ICADM-2007},
  year = 2007,
}

@inproceedings{CTT100544171,
  author = {Atsushi Kawamata and Yosio Saito and Tomohisa Tanaka},
  title = {Effect of Spindle Through MQL on End Milling},
  booktitle = {2007年度 砥粒加工学会学術講演会 講演論文集},
  year = 2007,
}

@inproceedings{CTT100533418,
  author = {竹中正彬 and 田中智久 and 齋藤義夫},
  title = {極座標型計測・加工装置の誤差補正に関する研究},
  booktitle = {2006年度精密工学会春季大会学術講演会講演論文集},
  year = 2007,
}

@inproceedings{CTT100533417,
  author = {高下法子 and 田中智久 and 斎藤義夫},
  title = {粗面の接触特性に及ぼす接線力の影響},
  booktitle = {2006年度精密工学会春季大会学術講演会講演論文集},
  year = 2007,
}

@inproceedings{CTT100533419,
  author = {劉光磊 and 斉藤義夫 and 田中智久},
  title = {デスクトップ型工作機械に適した小型自動工具交換装置に関する研究},
  booktitle = {2006年度精密工学会春季大会学術講演会講演論文集},
  year = 2007,
}

@inproceedings{CTT100562123,
  author = {Jiang Zhu and Tomohisa Tanaka and Yoshio Saito},
  title = {Rough machining process and its simulation for robot integraged surface sculpturing system},
  booktitle = {Prpceeding of the 4th IASTED International Conference on Circuits, Signals, and Systems},
  year = 2006,
}

@inproceedings{CTT100524922,
  author = {Nafis AHMAD and Tomohisa TANAKA and Yoshio SAITO},
  title = {Optimization of End Milling Operation By Genetic Algorithm based on Self Organizing Adaptive Penalty Strategy},
  booktitle = {Proceedings of The 12th Asia Pacific Management Conference XII-2006},
  year = 2006,
}

@inproceedings{CTT100524921,
  author = {竹中正彬 and 田中智久 and 齋藤義夫},
  title = {極座標型デスクトップマシンツールを用いた計測},
  booktitle = {日本機械学会第6回生産加工･工作機械部門講演会講演論文集},
  year = 2006,
}

@inproceedings{CTT100571836,
  author = {Jiang Zhu and Tomohisa Tanaka and Yoshio Saito},
  title = {8-axis robot integrated surface sculpturing system},
  booktitle = {New Technologies of Machine Tool and Manufacturing, Joint Event of the 12th International Machine Tool Engineers Conference},
  year = 2006,
}

@inproceedings{CTT100521534,
  author = {Tomohisa Tanaka and Masahiro Ashizuka and Yoshio Saito and Tsunamitsu Nakahara},
  title = {Study on The Contact Characteristics of Truncated Surfaces},
  booktitle = {Proceedings of The 3rd Asia International Conference on Tribology},
  year = 2006,
}

@inproceedings{CTT100556205,
  author = {Jiang Zhu and Ryoko Tanaka and Tomohisa Tanaka and Yoshio Saito},
  title = {An 8-axis robot based rough cutting system for surface sculpturing},
  booktitle = {Towards Synthesis of Micro-/Nano-systems},
  year = 2006,
}

@inproceedings{CTT100408598,
  author = {本田兼基 and 田中智久 and 齋藤義夫},
  title = {MQL加工用ミストセンサの開発},
  booktitle = {2006年度精密工学会春季大会学術講演会講演論文集},
  year = 2006,
}

@inproceedings{CTT100408594,
  author = {飯田喜洋 and 田中智久 and 齋藤義夫},
  title = {多軸ロボットシステムによる形状計測と精度評価},
  booktitle = {2006年度精密工学会春季大会学術講演会講演論文集},
  year = 2006,
}

@inproceedings{CTT100542201,
  author = {芦塚正博 and 田中智久 and 齋藤義夫},
  title = {トランケーションが及ぼす接触特性への影響(第2報) ―全反射光を利用した真実接触面積測定実験による検討―},
  booktitle = {2006年度精密工学会春季大会学術講演会講演論文集},
  year = 2006,
}

@inproceedings{CTT100408595,
  author = {下河辺学 and 田中智久 and 齋藤義夫},
  title = {CAMシステムを利用したポケット形状加工の体系化},
  booktitle = {2006年度精密工学会春季大会学術講演会講演論文集},
  year = 2006,
}

@inproceedings{CTT100408597,
  author = {菅谷健二郎 and 田中智久 and 齋藤義夫},
  title = {エキシマレーザ加工による高分子材料の3次元形状創成},
  booktitle = {2006年度精密工学会春季大会学術講演会講演論文集},
  year = 2006,
}

@inproceedings{CTT100521259,
  author = {Jiang Zhu and Ryoko Tanaka and Tomohisa Tanaka and Yoshio Saito},
  title = {An 8-Axis Robot Based Rough Cutting System for Surface Sculpturing},
  booktitle = {Proc The 11th International Conference on Precision Engineering (ICPE)},
  year = 2006,
}

@inproceedings{CTT100556203,
  author = {Jiang Zhu and Tomohisa Tanaka and Yoshio Saito},
  title = {3D mesh simplification for freeform surfacing},
  booktitle = {},
  year = 2005,
}

@inproceedings{CTT100408695,
  author = {N.Ahmad and T.Tanaka and Y.Saito},
  title = {Optimization of Cutting Parameters for End Milling Operation by SOAP Based Genetic Algorithm},
  booktitle = {Proc. 6th Int. Conf. on Mech. Engr.},
  year = 2005,
}

@inproceedings{CTT100408318,
  author = {J.Zhu and T.Tanaka and Y.Saito},
  title = {3D Mesh Simplification for FreeForm Surfacing},
  booktitle = {Proc. Teheran International Congress on Manufacturing Engineering},
  year = 2005,
}

@inproceedings{CTT100392874,
  author = {田中智久 and 京極啓史 and 中原綱光},
  title = {真実接触面積に及ぼす接線力の影響},
  booktitle = {トライボロジー会議 2005秋 東京},
  year = 2005,
}

@inproceedings{CTT100398650,
  author = {Nafis AHMAD and Tomohisa TANAKA and Yoshio SAITO},
  title = {Investigation of the Constraints for Optimization of Turning Process by GA with Self-Organizing Adaptive Penalty strategy},
  booktitle = {Proceedings of the 3rd International Conference on Leading Edge Manufacturing in 21st Century, Nagoya},
  year = 2005,
}

@inproceedings{CTT100392879,
  author = {菅谷健二郎 and 田中智久 and 齋藤義夫},
  title = {高分子材料へのエキシマレーザアブレーション加工に関する研究},
  booktitle = {2005年度精密工学会秋季大会学術講演会講演論文集},
  year = 2005,
}

@inproceedings{CTT100408696,
  author = {Tomohisa TANAKA and Chikara YAMANAKA and Keiji KYOGOKU and Tsunamitsu NAKAHARA},
  title = {The Effect of Interaction between Neighboring Asperity Contacts on Wear Mode Transition in Sliding Contact of Rough Surfaces},
  booktitle = {Proceedings of the 3rd World Tribology Congress},
  year = 2005,
}

@inproceedings{CTT100392878,
  author = {高下法子 and 田中智久 and 齋藤義夫},
  title = {弾性変形拡張方式によるホーニングツールの開発},
  booktitle = {2005年度精密工学会秋季大会学術講演会講演論文集},
  year = 2005,
}

@inproceedings{CTT100392875,
  author = {芦塚正博 and 田中智久 and 齋藤義夫},
  title = {トランケーションが及ぼす接触特性への影響},
  booktitle = {2005年度精密工学会秋季大会学術講演会講演論文集},
  year = 2005,
}

@inproceedings{CTT100562128,
  author = {Jiang Zhu and Tomohisa Tanaka and Yoshio Saito},
  title = {A new mesh simplification algorithm for the application of surface sculpturing},
  booktitle = {Proceeding of The First JTU-TIT Joint Workshop on Creative Engineering-Mechanics, Control and Advanced Robotics},
  year = 2005,
}

@inproceedings{CTT100627965,
  author = {T.Tanaka and S.Sugiyama and C.Yamanaka and S.Momozono and K.Kyogoku and T.Nakahara},
  title = {Measurement of true contact area by means of elliptical polarized light reflection under slip condition},
  booktitle = {Synopses of the International Tribology Conference Kobe},
  year = 2005,
}

@inproceedings{CTT100392888,
  author = {原雄太 and 田中智久 and 齋藤義夫},
  title = {工作機械の消費電力評価方法の構築},
  booktitle = {2005年度精密工学会春季大会学術講演会講演論文集},
  year = 2005,
}

@inproceedings{CTT100392886,
  author = {深見徹 and 田中智久 and 齋藤義夫},
  title = {極座標型デスクトップマシンツールを用いた加工と計測},
  booktitle = {2005年度精密工学会春季大会学術講演会講演論文集},
  year = 2005,
}

@inproceedings{CTT100392890,
  author = {杉恵貴史 and 田中智久 and 齋藤義夫},
  title = {8軸制御曲面加工システムの構築とそのプログラミング},
  booktitle = {2005年度精密工学会春季大会学術講演会講演論文集},
  year = 2005,
}

@inproceedings{CTT100628800,
  author = {TOMOHISA TANAKA and Satoshi SUGIYAMA and Chikara YAMANAKA and Satoshi MOMOZONO and Keiji KYOGOKU and Tsunamitsu NAKAHARA},
  title = {JAST Tribology Conference 2004 Tottori},
  booktitle = {トライボロジー会議予稿集 鳥取 2004-11},
  year = 2004,
}

@inproceedings{CTT100389097,
  author = {下河辺 and 原雄太 and 田中智久 and 齋藤義夫},
  title = {Measurement and Evaluation of Power Consumption for Machine Tool},
  booktitle = {2004年度精密工学会秋季大会学術講演会講演論文集},
  year = 2004,
}

@inproceedings{CTT100389096,
  author = {飯田喜洋 and 田中智久 and 齋藤義夫},
  title = {Development of Mist Sensor for MQL Machining Process},
  booktitle = {2004年度精密工学会秋季大会学術講演会講演論文集},
  year = 2004,
}

@inproceedings{CTT100389099,
  author = {歌田英司 and 菅谷健二郎 and 田中智久 and Akbari Javad and 齋藤義夫},
  title = {Study on Excime Laser Machining of Polystyrene Foam},
  booktitle = {2004年度精密工学会春季大会学術講演会講演論文集},
  year = 2004,
}

@inproceedings{CTT100389100,
  author = {福永悦史 and 田中智久 and Akbari Javad and 齋藤義夫},
  title = {Development of the high-speed spindle for micro machine tools and application to MQL processing},
  booktitle = {2004年度精密工学会春季大会学術講演会講演論文集},
  year = 2004,
}

@inproceedings{CTT100389101,
  author = {山田維祐 and 大野竜太 and 田中智久 and Akbari Javad and 齋藤義夫},
  title = {Development of the Auto Alignment Mechanism for a Desk-Top Machine Tool},
  booktitle = {2004年度精密工学会春季大会学術講演会講演論文集},
  year = 2004,
}

@inproceedings{CTT100389098,
  author = {高本尚志 and 田中智久 and Akbari Javad and 齋藤義夫},
  title = {Study on ultra-precision machining of electroless Ni-P composite alloy},
  booktitle = {2004年度精密工学会春季大会学術講演会講演論文集},
  year = 2004,
}

@inproceedings{CTT100491008,
  author = {T.SUGIE and T.TANAKA and J.AKBARI and Y.SAITO},
  title = {An Approximation of Free-Formed Surface for NC Machining},
  booktitle = {Proceedings of the International Conference  on Leading Edge Manufacturing in 21st Century, Niigata},
  year = 2003,
}

@inproceedings{CTT100537923,
  author = {Tomohisa TANAKA and Keiji KYOGOKU and Tsunamitsu NAKAHARA},
  title = {The Effect of Shear on Transition of Load Condition in 2D Contact of Rough Surfaces},
  booktitle = {Proceedings of The 2nd World Tribology Congress},
  year = 2001,
}

@misc{CTT100879957,
  author = {Yasunori Sakai and 青木 繁 and TOMOHISA TANAKA},
  title = {機械加工における超音波振動の応用例と今後の展望},
  year = 2019,
}

@misc{CTT100594103,
  author = {TOMOHISA TANAKA},
  title = {粗さを有する接触面の摩耗形態遷移臨界圧力に関する研究},
  year = 2001,
}

@misc{CTT100885387,
  author = {TOMOHISA TANAKA},
  title = {医療用挿入具},
  howpublished = {PublishedPatent},
  year = 2022,
  month  = {},
  note   = {特願2021-055618(2021/03/29), 特開2022-152741(2022/10/12)}
}


@misc{CTT100820757,
  author = {TOMOHISA TANAKA and Yasunori Sakai},
  title = {加工ツールを用いた穴加工機},
  howpublished = {RegisteredPatent},
  year = 2022,
  month  = {},
  note   = {特願2018-110851(2018/06/11), 特開2019-214079(2019/12/19), 特許第7127810号(2022/08/22)}
}


@misc{CTT100794700,
  author = {TOMOHISA TANAKA and Yasunori Sakai},
  title = {制振ダンパ},
  howpublished = {RegisteredPatent},
  year = 2021,
  month  = {},
  note   = {特願2017-115916(2017/06/13), 特開2019-002441(2019/01/10), 特許第6908921号(2021/07/06)}
}




@phdthesis{CTT100594103,
  author = {TOMOHISA TANAKA},
  title = {粗さを有する接触面の摩耗形態遷移臨界圧力に関する研究},
  school = { Tokyo Institute of Technology},
  year = 2001,
}