"Hayato YOSHIOKA,Teruto HIFUMI,Shingo TAJIMA","Identification and grouping defects for complement in measuring of workpiece with 3D scanner","Leading Edge Manufacturing/Material and Processing (LEM&P2023)",,,,,,2023,June
"Shingo TAJIMA,Yuta KOJIMA,Hayato YOSHIOKA","Displacement Compensation of Machining Robot based on Trajectory Control for High Accuracy","Leading Edge Manufacturing/Material and Processing (LEM&P2023)",,,,,,2023,June
"Yoshioka, H.","Advanced manufacturing systems based on mechatronics","The 25th International Conference on Mechatronics Technology",,,,,,2022,Nov.
"Kouguchi, J.,Yoshioka, H.","Estimation method of cutting forces and abnormal vibrations by using frequency separation of acceleration sensor signals","The 19th International Conference on Precision Engineering","Proceedings of the 19th International Conference on Precision Engineering",,,,,2022,Nov.
"Tajima, S.,Sencer, B.,Yoshioka, H.","Real-time interpolation of complex machining toolpaths with drive limits and vibration avoidance","The 19th International Conference on Precision Engineering","Proceedings of the 19th International Conference on Precision Engineering",,,,,2022,Nov.
"Hayato YOSHIOKA,Masaki ENDO,Shingo TAJIMA","Effect of Contact Surface Pressure on Heat Transfer Characteristics of Bolted Joint in Machine Tool","Proceedings of the 14th Manufacturing & Machine Tool Conference",,,,,,2022,Oct.
"Hayato Yoshioka","熱変形抑制を目的としたCFRP複合材ボールねじ",,"砥粒加工学会誌",,"Vol. 66","No. 7","pp. 382-385",2022,July
"Shingo Tajima,Burak Sencer,Hayato Yoshioka","Trajectory Generation for Dual-Drive Servo Systems for Laser Processing with Local Corner Smoothing","2022 International Symposium on Flexible Automation (ISFA2022)",,,,,,2022,July
"Yang Li,Hayato Kojima,Shingo Tajima,Hayato Yoshioka","Study on The Vertical Vibration Behavior of Beam Caused by Driving Force","2022 International Symposium on Flexible Automation (ISFA2022)",,,,,,2022,July
"Yamada, M.,Kimura, T.,Kimura, N.,Watanabe, J.,Kartikasari, N.,He X.,Tiskratok, W.,Yoshioka, H.,Shinno, H.,Egusa, H.","The titanium nanosurface with biomimetic physical microenvironment to induce endogenous regeneration of the periodontium",,"ACS Applied Materials & Interfaces",,"Vol. 14","No. 24",,2022,June
"Yoshiyuki Hara,Hayato Yoshioka,Shingo Tajima","研削力の時間領域および周波数領域における特徴量推移に基づく砥石表面状態変化の推定","2022年度精密工学会春季大会","2022年度精密工学会春季大会学術講演会講演論文集",,,,"pp. 393-394",2022,Mar.
"Showa, Y.,Yoshioka, H.","Reduction of the influence of non-repeatable run-out in X-Y plane on machining surface",,"International Journal of Automation Technology",,"Vol. 16","No. 2","pp. 149-156",2022,Mar.
"Satoshi Iwamoto,Shingo Tajima,Hayato Yoshioka","冗長性を持つ産業用ロボットの機械加工における位置決めの高精度化","2022年度精密工学会春季大会","2022年度精密工学会春季大会学術講演会講演論文集",,,,"pp. 741-742",2022,Mar.
"Kazuya Miyashita,Hayato Yoshioka,Shingo Tajima","産業用ロボットの固有振動数変化を考慮した速度プロファイル生成法","2022年度精密工学会春季大会","2022年度精密工学会春季大会学術講演会講演論文集",,,,"pp. 737-738",2022,Mar.
"Takeaki Yamamoto,Shingo Tajima,Hayato Yoshioka,奥山弥生,勝田悠介,江草宏","人工支台歯形状の特徴抽出に基づく自動評価システムの開発","2022年度精密工学会春季大会","2022年度精密工学会春季大会学術講演会講演論文集",,,,"pp. 580-581",2022,Mar.
"Hayato Yoshioka,Arisa Torii","ハイパースペクトルデータを用いためっき液の状態推定",,"月刊 画像ラボ",,"Vol. 33","No. 1","pp. 6-9",2022,Jan.
"Fuga Yamamoto,Hayato Yoshioka,Shingo Tajima","Non-contact observation of tooth profile error of involute spur gears by using autocollimator","The 23rd International Symposium on Advanced Abrasive Technology",,,,,,2021,Nov.
"Kojima, Y.,Yoshioka, H.,Tajima, S.","Fine pattern fabrication on a 3D surface using fast tool servo for milling process","The 10th International Conference on Leading Edge Manufacturing in 21st Century",,,,,,2021,Nov.
"Hifumi, T.,Tajima, S.,Yoshioka, H.","Tool path control for singularity avoidance of 5-axis machine tool by combining circular arc and cubit spline","The 10th International Conference on Leading Edge Manufacturing in 21st Century",,,,,,2021,Nov.
"Muslimin,Katerina Mukti,Hasvienda M. Ridlwan,M. Sholeh,Ade Sumpena,Jiang Zhu,Hayato Yoshioka,Tomohisa Tanaka","Direct NC Toolpath Generation from 3D Point Cloud Datasets","the 9th Annual Southeast Asian International Seminar","Proceedings of the 9th Annual Southeast Asian International Seminar (ASAIS 2020)","Science and Technology Publications",,,"pp. 138-145",2021,Oct.
"Inoue, S.,Urata, A.,Kodama, T.,Tobias, H.,Maruyama, Y.,Fujita, S.,Shinno, H.,Yoshioka, H.","High precision mobile robotic manipulator for reconfigurable manufacturing systems",,"International Journal of Automation Technology",,"Vol. 15","No. 5","pp. 651-660",2021,Sept.
"Tajima, S.,Iwamoto, S.,Yoshioka, H","Kinematic tool-path smoothing for 6-axis industrial machining robots",,"International Journal of Automation Technology",,"Vol. 15","No. 5","pp. 621-630",2021,May
"Yuta Showa,Hayato Yoshioka","工作機械用転がり軸受主軸における工具回転非同期振れによる加工面への影響の低減（加振システムによる加工面品位の改善）",,"日本機械学会論文集",,"Vol. 87","No. 894","p. 20-00343",2021,Feb.
"Arisa Torii,Hayato Yoshioka,Shingo Tajima,HIDENORI SHINNO","ハイパースペクトルデータを用いためっき加工状態の認識および加工面の定量的評価",,"日本機械学会論文集",,"Vol. 86","No. 892","pp. 1-18",2020,Dec.
"Asako Sakataya,Hayato Yoshioka,Shingo Tajima,HIDENORI SHINNO","ファイバレーザを用いた鉄系材料に対する面取り",,"日本機械学会論文集",,"Vol. 86","No. 892","pp. 1-13",2020,Dec.
"Showa, Y.,Yoshioka, H.","Reduction of the influence on machining surface caused by tool nonrepeatable run-out of rolling bearing spindle for machine tools ?Evaluation of effectiveness of NRRO reduction on machining surface by an excitation system-","18th International Conference on Precision Engineering (ICPE2020)","Proceedings of ICPE2020",,,,"pp. C-1-12",2020,Nov.
"Tajima, S.,Sencer, B.,Yoshioka, H.","Kinematic smoothing for singularity avoidance in 5-axis machining","18th International Conference on Precision Engineering (ICPE2020)","Proceedings of ICPE2020",,,,"pp. C-1-9",2020,Nov.
"Naotoshi Oyama,Hayato Yoshioka,奥山弥生,Shingo Tajima,江草 宏,HIDENORI SHINNO","光切断法を用いた人工歯形状評価法","2020年度精密工学会秋季大会学術講演会","2020年度精密工学会秋季大会学術講演会講演論文集",,,,"  E0102",2020,Sept.
"Satoshi Iwamoto,Hayato Yoshioka,Shingo Tajima,HIDENORI SHINNO","反力利用形カウンタウェイト機構における外乱応答特性","2020年度精密工学会秋季大会学術講演会","2020年度精密工学会秋季大会学術講演会講演論文集",,,,"  B0107",2020,Sept.
"Hayato Yoshioka,Junya Hashimoto,Shingo Tajima,HIDENORI SHINNO","CFRPの繊維配向を考慮した工作機械テーブルの検討","2020年度精密工学会秋季大会学術講演会","2020年度精密工学会秋季大会学術講演会講演論文集",,,,"  B0101",2020,Sept.
"Yoshioka, H.,Saito, S.,Kato, J.,Shinno, H.,Goto, S.,Hori, N.","Improvement of thermal deformation in a newly developed steel CFRP composite ball screw","JSME 2020 Conference on Leading Edge Manufacturing/Materials and Processing (LEMP2020)","Proceedings of JSME 2020 Conference on Leading Edge Manufacturing/Materials and Processing (LEMP2020)",,,,,2020,June
"Tajima, S.,Sencer, B.,Yoshioka, H.,Shinno, H.","Smooth path blending for 5-axis machining","JSME 2020 Conference on Leading Edge Manufacturing/Materials and Processing (LEMP2020)","Proceedings of JSME 2020 Conference on Leading Edge Manufacturing/Materials and Processing (LEMP2020)",,,,,2020,June
"Hayato Yoshioka,Kotaro Kojima,Daisuke Toyota","Micro patterning on curved surface with a fast tool servo system for micro milling process",,"CIRP Annals - Manufacturing Technology",,"Vol. 69",,"pp. 325-328",2020,May
"Yuta Showa,Hayato Yoshioka,Hidenori Shinno","Reduction of the influence on machining surface caused by tool non-repeatable run-out of rolling bearing spindle for machine tools (Development of an excitation system)",,"日本機械学会論文集",,"Vol. 86","No. 884","p. 19-00450",2020,Apr.
"Makoto KATO,Daisuke KONO,Hayato YOSHIOKA,Naohiko SUGITA,Akihide HAMAGUCHI,Kazumasa KONO,Kazunori IIJIMA,Yasuhiro KAKINUMA","Thermal error and energy-saving performance evaluation of the energy-saving machine tool using new structural materials",,"日本機械学会論文集",,"Vol. 86","No. 884","p. 20-00002",2020,Apr.
"Jiang Zhu,Yurio Hosaka,Hayato Yoshioka","A Robust Algorithm to Remove the Self-intersection of 3D Mesh Data without Changing the Original Shape",,"Journal of physics : conference series","IOP Publishing","Vol. 1314","No. 1",,2019,Nov.
"Sho SAKATAYA,Hayato YOSHIOKA,Hidenori SHINNO,Atsushi MORI","Chamfering of Ferrous Materials with Fiber Laser","第13回生産加工・工作機械部門講演会（日本機械学会）","Proceedings of the 13th Manufacturing & Machine Tool Conference(JSME)","The Japan Society of Mechanical Engineers（JSME)","Vol. 19","No. 307","pp. 122?124",2019,Oct.
"Yuta SHOWA,Hideki MOCHIDA,Hayato YOSHIOKA,Hidenori SHINNO","A Prototype Excitation System to Reduce the Influence on Machining Surface","The 13th Manufacturing &Machine Tool Conference（JSME）","Proceedings of the 13th Manufacturing & Machine Tool Conference(JSME)","The Japan Society of Mechanical Engineers（JSME)","Vol. 19","No. 307","pp. 233-236",2019,Oct.
"Misaki NISHIMURS,Hayato YOSHIOKA,Hidenori SHINNO","Thermal and Mechanical Characteristic Evaluation of Machine Tool Column","The 13th Manufacturing &Machine Tool Conference（JSME）","Proceedings o the 13th Manufacturing & Machine Tool Conference(JSME)","The Japan Society of Mechanical Engineers(JSME)","Vol. 19","No. 307","pp. 230-232",2019,Oct.
"Arisa TORII,Hayato YOSHIOKA,Hidenori SHINNO","Monitoring of Plating Process Based on Hyperspectral Data","The 13th Manufacturing &Machine Tool Conference（JSME）","Proceedings of the 13th Manufacturing & Machine Tool Conference","The Japan Society of Mechanical Engineers（JSME)","Vol. 19","No. 307","pp. 351-353",2019,Oct.
"Hayato YOSHIOKA,Yuki TAMURA,Koutaro KOJIMA,Hidenori SHINNO","Characteristic Evaluation of Tool Servo System Driven by Giant Magnetostrictive Element or Micro Milling Process","The 13th Manufacturing &Machine Tool Conference（JSME）","Proceedings of the 13th Manufacturing & Machine Tool Conference(JSME)","The Japan Society of Mechanical Engineers（JSME)","Vol. 19","No. 307","pp. 237-239",2019,Oct.
"Chenyao Cao,Jiang Zhu,Tomohisa Tanaka,Fang-Jung Shiou,Shunichi Sawada,Hayato Yoshioka","Ball Burnishing of Mg Alloy Using a Newly Developed Burnishing Tool with On-machine Force Control",,"International Journal of Automation Technology","Fuji Technology Press Ltd.","Vol. 13","No. 5","pp. 619-630",2019,Sept.
"Leandro Batista da silva,Hayato Yoshioka,Hidenori Shinno,Jiang Zhu","Tool Orientation Angle Optimization for a Multi-axis Robotic Milling System",,"International Journal of Automation Technology","Fuji Technology Press Ltd.","Vol. 13","No. 5","pp. 574-582",2019,Sept.
"Yamada, M.,Kimura, T.,Nakamura N.,Yoshioka, H.,Shinno, H.,Egusa, H.","Biomimetic Titanium Nano-surface Promote Induction of Periodontal Ligaments","The 2019 IADR/AADR/CADR General Session & Exhibition",,,,,,2019,June
"杉田直彦,Hayato Yoshioka,柿沼康弘,河野大輔","新構造材料適用省エネ型工作機械の研究開発","2019年度精密工学会春季大会","学術講演会講演論文集",,,,"pp. 211-212",2019,Mar.
"Leandro Batista Da Silva,JIANG ZHU,Hayato Yoshioka","Tool path optimization for multi-axis robotic milling system","the 18th International Machine Tool Engineers` Conference","Proceeding of the 18th International Machine Tool Engineers' Conference","Japan Machine Tool Builders' Association",,,"pp. 90-91",2018,Nov.
"Yoshioka, H.,Ji, Y.,Shinno, H.,Nishikawa, Y.,Mori, A.","Evaluation of groove machining characteristics of CFRP with fiber laser based on covariance structure analysis","The 17th International Conference on Precision Engineering (ICPE2018)","Proceedings of the 17th International Conference on Precision Engineering",,,,,2018,Nov.
"Kotaro Kojima,Yuuki Tamura,Hayato Yoshioka","Fine milling by magnetostrictive element-driven tool servo","The 18th International Machine Tool Engineerings' Conference","Proceeding of the 18th INternational Machine Tool Engineers' Conference",,,,"pp. 16-17",2018,Nov.
"Jun KATO,Hayato YOSHIOKA,Kazuhiro ASAKURA,Keisuke USUDA,Nobumitsu HORI,臼田敬介,堀伸充","CFRPを適用した熱変形抑制ボールねじの性能評価","2018年度精密工学会秋季大会学術講演会","2018年度精密工学会秋季大会学術講演会講演論文集","公益社団法人 精密工学会",,,"pp. 145-146",2018,Sept.
"Arisa TORII,Hayato YOSHIOKA,Hidenori SHINNO","超多点法に基づくロバストな表面形状計測システム","2018年度精密工学会秋季大会学術講演会","2018年度精密工学会秋季大会学術講演会講演論文集","公益社団法人 精密工学会",,,"pp. 612-613",2018,Sept.
"Yamato, S.,Yamada, Y.,Nakanishi, K.,Suzuki, N.,Yoshioka, H.,Kakinuma, Y.","Integrated in-process chatter monitoring and automatic suppression with adaptive pitch control in parallel turning",,"Advances in Manufacturing",,"Vol. 6","No. 3","pp. 291-300",2018,May
"Sakata, S.,Kadota, T.,Yamada, Y.,Nakanishi, K.,Yoshioka, H.,Suzuki, N.,Kakinuma, Y.","Chatter avoidance in parallel turning with unequal pitch angle using observer-based cutting force estimation",,"Journal of Manufacturing Science and Engineering",,"Vol. 140","No. 4","pp. 044501-1 - 044501-7",2018,Apr.
"Hayate Isoda,Hayato Yoshioka,Hidenori Shinno,AKITOSHI OKINO,Hiroaki Kawano","大気圧プラズマによる材料加工の特性評価","2018年度精密工学会春季大会学術講演会",,,,,,2018,Mar.
"Masayuki Nakamura,Hayato Yoshioka,Hidenori Shinno","ハイパースペクトルデータに基づく研削砥石表面の定量的評価","2018年度精密工学会春季大会学術講演会",,,,,,2018,Mar.
"Hayato Yoshioka","超精密加工機の状態モニタリング技術および機上測定技術",,"機械技術",,"Vol. 66","No. 1","pp. 25-28",2018,Jan.
"JIANG ZHU,Akira Tajima,TOMOHISA TANAKA,Hayato Yoshioka","Study on the accuracy improvement for laser forming processing of micro-wire","The 9th International Conference on Leading Edge Manufacturing in 21st Century","Proceeding of The 9th International Conference on Leading Edge Manufacturing in 21st Century","Japan Society of Mechanical Engineers",,,,2017,Nov.
"Hayato Yoshioka,Masahiro Akiyama,Hidenori Shinno","Approach detection of diamond cutting tool by using photoelectric effect","The International Conference on Leading Edge Manufacturing in 21st Century",,,,,,2017,Nov.
"Yoshioka, H.,Shinno, H.,Zhu, J.,Uchiumi, M","A newly developed zero-gravity vertical motion mechanism for precision machining",,"CIRP Annals - Manufacturing Technology",,"Vol. 66","No. 1","pp. 389-392",2017,July
"Hayato Yoshioka,Hidenori Shinno,Yuuki Tamura","Rotary Fast Tool Servo for Generating Micro Structured Surface",,"Journal of Society of Automotive Engineers of Japan","公益社団法人自動車技術会","Vol. 71","No. 6","pp. 68-71",2017,June
"Sakata, S.,Kadota, T.,Yamada, Y.,Nakanishi, K.,Yoshioka, H.,Suzuki, N.,Kakinuma, Y.","Suppression of chatter vibration by unequal pitch turning applying estimated cutting force","12th International Manufacturing Science and Engineering Conference",,,,,,2017,June
"Yamada, Y.,Kadota, T.,Sakata, S.,Nakanishi, K.,Yoshioka, H.,N. Suzuki,Kakinuma, Y.","Parallel turning with unequal pitch angle for chatter avoidance","1st International Symposium on Applied Abstraction and Integrated Design",,,,,,2017,Mar.
"Satoshi Inoue,Yasunori Sakai,TOMOHISA TANAKA,Hayato Yoshioka,JIANG ZHU,星出薫,古澤竜二","Elucidation of Contact State of Rolling Elements Used for Carriage of Rolling Guideway in Static State","2017年度精密工学会春季大会学術講演会","2017年度精密工学会春季大会学術講演会講演論文集","公益社団法人 精密工学会",,,,2017,Mar.
"Manabu UCHIUMI,Hayato YOSHIOKA,Jiang ZHU","The Study on the Relation of Dynamic Stiffness and Joint of Mother Machine with CFRP","2017年度精密工学会春季大会学術講演会","2017年度精密工学会春季大会学術講演会講演論文集","公益社団法人 精密工学会",,,,2017,Mar.
"Jumpei YAMAUCHI,Jiang ZHU,Hayato YOSHIOKA","Influence from vibration characteristic of multi-tasking machine for cutting force estimation with disturbance observer","2017年度精密工学会春季大会学術講演会","2017年度精密工学会春季大会学術講演会講演論文集","公益社団法人 精密工学会",,,,2017,Mar.
"Shunichi SAWADA,Jiang Zhu,Fang-Jung Shiou,Hayato Yoshioka","Study on ball burnishing tool enabling constant force control","2017年度精密工学会春季大会学術講演会","2017年度精密工学会春季大会学術講演会講演論文集","公益社団法人 精密工学会",,,,2017,Mar.
"Shunsuke Hotta,Hayato Yoshioka,Jiang Zhu,Tomohisa Tanaka","The Influence of Laser Irradiation Parameters to the Surface Condition and the Color of Titanium","2017年度精密工学会春季大会学術講演会","2017年度精密工学会春季大会学術講演会講演論文集","公益社団法人 精密工学会",,,,2017,Mar.
"Sakata, Shinya,Kadota, Takashi,Yamada, Yuki,Nakanishi, Kenichi,Hayato Yoshioka,Suzuki, Norikazu,Kakinuma, Yasuhiro","CHATTER SUPPRESSION IN PARALLEL TURNING WITH UNEQUAL PITCH USING OBSERVER BASED CUTTING FORCE ESTIMATION","12th ASME International Manufacturing Science and Engineering Conference","PROCEEDINGS OF THE ASME 12TH INTERNATIONAL MANUFACTURING SCIENCE AND ENGINEERING CONFERENCE - 2017, VOL 3","AMER SOC MECHANICAL ENGINEERS",,,,2017,
"Hayato Yoshioka,Jiang Zhu,Toshiki Hanaoka,Yasunori Sakai","Influence of angular error in multi-axis machine tool on estimation of Machining force by disturbance observer","the 17th International Machine Tool Engineers` Conference","Proceedings of the 17th International Machine Tool Engineers` Conference","Japan Machine Tool Builders' Association",,,"pp. 132-133",2016,Nov.
"Hayato Yoshioka,Hidenori Shinno,Yuuki Tamura","Tool Servo System Driven by Giant Magnetostrictive Element for Milling Process","The 17th International Machine Tool Engineers' Conference(The 17th IMEC)","Proceedings of the 17th International Machine Tool Engineers' Conference(The 17th IMEC)","Japan Machine Tool Builders' Association",,,"p. 136",2016,Nov.
"Hayato Yoshioka,Hidenori Shinno,Motochika Shimizu,Hiroshi Sawano","Surface Texture Assessment Based on Analysis of Laser Speckle","The 17th International Machine Tool Engineers' Conference(The 17th IMEC)","Proceedings of the 17th International Machine Tool Engineers' Conference(The 17th IMEC)","Japan Machine Tool Builders' Association",,,"p. 178",2016,Nov.
"Yasunori Sakai,So Fukasawa,Jiang Zhu,Hayato Yoshioka,Tomohisa Tanaka,Kaoru Hoshide,Ryuji Furusawa","Influence of Designing Parameters on Vibration Damping of Rolling Guideway","16th International Conference on Precision Engineering","Proceeding of 16th International Conference on Precision Engineering","The Japan Society for Precision Engineering",,,,2016,Nov.
"Shunsuke Hotta,Jiang Zhu,Hayato Yoshioka,Tomohisa Tanaka","Study on the mechanism of titanium oxide layer growth by laser irradiation on titanium","16th International Conference on Precision Engineering","Proceeding of 16th International Conference on Precision Engineering","The Japan Society for Precision Engineering",,,,2016,Nov.
"Jiang Zhu,Shunsuke Hotta,Hayato Yoshioka,Tomohisa Tanaka","Study on the titanium oxide layer generation mechanism by YVO4 laser irradiation on titanium","the 8th Japan-Taiwan workshop on mechanical engineering and aerospace","Proceeding of the 8th Japan-Taiwan workshop on mechanical engineering and aerospace",,,,,2016,Nov.
"Shunsuke Hotta,Jiang Zhu,Tomohisa Tanaka,Hayato Yoshioka","Titanium Coloring Machining by Laser Irradiation","the 17th International Machine Tool Engineers` Conference","Proceedings of the 17th International Machine Tool Engineers` Conference","Japan Machine Tool Builders' Association",,,"pp. 84-85",2016,Nov.
"Noriyuki HASEGAWA,Hayato YOSHIOKA,Hidenori SHINNO","Noncontact Gravity Compensator with Magnetic Fluid Seals",,"Journal of Advanced Mechanical Design, Systems, and Manufacturing",,"Vol. 10","No. 5","pp. 1-10",2016,Oct.
"Hayate Isoda,Hayato Yoshioka,HIDENORI SHINNO","超精密直動転がり案内テーブルにおけるMasing則に基づいた摩擦特性補償","第11回日本機械学会生産加工・工作機械部門講演会","第11回生産加工・工作機械部門講演会 講演論文集",,,,"pp. 35-36",2016,Oct.
"Yuuki Tamura,Hayato Yoshioka,HIDENORI SHINNO","超磁歪素子駆動回転形高速工具サーボによるフライス加工状態のインプロセス認識","第11回日本機械学会生産加工・工作機械部門講演会","第11回生産加工・工作機械部門講演会 講演論文集",,,,"pp. 39-40",2016,Oct.
"門田崇志,山田雄基,中西賢一,橘純司,Hayato Yoshioka,鈴木教和,柿沼康弘","推定切削力を応用した不等ピッチターニングによるびびり振動抑制","第11回日本機械学会生産加工・工作機械部門講演会","第11回生産加工・工作機械部門講演会 講演論文集",,,,"pp. 11-12",2016,Oct.
"Shunichi Sawada,JIANG ZHU,修芳仲,Hayato Yoshioka","ロードセルを内蔵した工具を用いたSUS420材のボールバニシング加工","第11回日本機械学会生産加工・工作機械部門講演会","第11回生産加工・工作機械部門講演会 講演論文集",,,,"pp. 137-138",2016,Oct.
"Muslimin,Zhu, J.,Yoshioka, H.,Tanaka, T.","Automatic segmentation and feature identification of laser scanning point cloud data for reverse engineering","International Symposium on Flexible Automation","Proceedings of International Symposium on Flexible Automation",,,,,2016,Aug.
"Hayato Yoshioka","Present state and future prospects of fluid bearing technology",,"Journal of the Japan Society for Abrasive Technology","砥粒加工学会","Vol. 60","No. 7","pp. 358-361",2016,July
"Yuuki Tamura,Hayato Yoshioka,Hidenori Shinno","Rotary-axial positioning system with giant magnetostrictive element","7th CIRP Conference on High Performance Cutting (7th HPC 2016)","Procedia CIRP","Elsevier B.V.","Vol. 46",,"pp. 315-318",2016,May
"Yurio Hosaka,JIANG ZHU,Hayato Yoshioka","Self-intersection remove method of 3D-mesh without changing the original shape","日本機械学会関東支部第22期総会講演会","日本機械学会関東支部第22期総会講演会講演論文集","日本機械学会",,"No. 160-1",,2016,Mar.
"Hayato Yoshioka,Kanako Harada,Takashi Onishi,Keiichi Nakamoto,Nobuyuki Moronuki,Mamoru Mitsuishi","Collaboration between machine tool industry and academia for young innovators","日本機械学会関東支部第22期総会・講演会",,,,,,2016,Mar.
"Akira Tajima,Hayato Yoshioka,JIANG ZHU,TOMOHISA TANAKA","Improvement of the processing precision in the laser forming for metal wire","2016年度精密工学会春季大会学術講演会","2016年度精密工学会春季大会学術講演会講演論文集","精密工学会",,,"pp. 817-818",2016,Mar.
"Toshiki Hanaoka,JIANG ZHU,Hayato Yoshioka,Yasunori Sakai","Influence from vibration characteristic of multi-tasking machine for cutting force estimation with disturbance observer","2016年度精密工学会春季大会学術講演会","2016年度精密工学会春季大会学術講演会講演論文集","精密工学会",,,"pp. 761-762",2016,Mar.
"Yasunori Sakai,JIANG ZHU,Hayato Yoshioka,TOMOHISA TANAKA","Influence of Lubricating oil on nonlinear frequency response characteristic of rolling guideway","2016年度精密工学会春季大会学術講演会","2016年度精密工学会春季大会学術講演会講演論文集","精密工学会",,,"pp. 739-740",2016,Mar.
"Syunsuke Hotta,Hayato Yoshioka,JIANG ZHU,TOMOHISA TANAKA","Coloring of Titanium by using YVO4 Laser -Relation between laser parameters and coloring-","日本機械学会関東支部第22期総会講演会","日本機械学会関東支部第22期総会講演会講演論文集","日本機械学会",,"No. 160-1",,2016,Mar.
"Sou Fukasawa,Yasunori Sakai,JIANG ZHU,Hayato Yoshioka,TOMOHISA TANAKA,星出 薫,古澤竜二","Influence of Contact Condition of Rolling Elements on Damping Characteristics of Rolling Guideway","日本機械学会関東支部第22期総会講演会","日本機械学会関東支部第22期総会講演会講演論文集","日本機械学会",,"No. 160-1",,2016,Mar.
"Yasunori Sakai,Sou Fukasawa,JIANG ZHU,Hayato Yoshioka,TOMOHISA TANAKA,星出 薫,古澤竜二","Development of Measuring Apparatus for Contact Damping of Rolling Guideway","日本機械学会関東支部第22期総会講演会","日本機械学会関東支部第22期総会講演会講演論文集","日本機械学会",,"No. 160-1",,2016,Mar.
"Leandro Batista Da Silva,Yasunori Sakai,JIANG ZHU,Hayato Yoshioka","Influence of Machining Conditions on Cut Quality of Laser Diced SiC Wafer","日本機械学会関東支部第22期総会講演会","日本機械学会関東支部第22期総会講演会講演論文集","日本機械学会",,"No. 160-1",,2016,Mar.
"Motochika Shimizu,Hiroshi Sawano,Hayato YOSHIOKA,Hidenori SHINNO","On-machine surface texture measuring system using laser speckle pattern analysis",,"International Journal of Automation Technology",,"Vol. 10","No. 1","pp. 69-77",2016,Jan.
"Yuuki Tamura,Hayato Yoshioka,Hidenori Shinno,Hiroshi Sawano","Nano-positioning system using self-sensing function of giant magnetostrictive actuator",,"Transactions of the JSME",,"Vol. 81","No. 832","pp. 1-13",2015,Dec.
"Muslimin,Jiang ZHU,Hayato YOSHIOKA,Tomohisa TANAKA,Yoshio SAITO","Study on plane feature extraction in registration of laser scanning data sets for reverse engineering",,"Journal of Advanced Mechanical Design, Systems, and Manufacturing",,"Vol. 9","No. 5","pp. 1-14",2015,Dec.
"Hayato Yoshioka,Hidenori Shinno,Hiroshi Sawano","A low-profile planar motion table system driven by steel belt",,"International Journal of Automation Technology",,"Vol. 9","No. 6","pp. 739-745",2015,Nov.
"Hayato Yoshioka","エバネッセント光を用いたダイヤモンド工具と工作物との接触認識",,"ニューダイヤモンド",,"Vol. 31","No. 4","pp. 15-18",2015,Oct.
"Tomohisa Tanaka,Syo Harada,Jiang Zhu,Hayato Yoshioka,Yoshio Saito","Fundamental Study for Control of Hue and Brightness in the Laser Coloring","The 8th International Conference on Leading Edge Manufacturing in 21st Century","Proceeding of the 8th International Conference on Leading Edge Manufacturing in 21st Century","the Japan Society of Mechanical Engineers",,,,2015,Oct.
"Muslimin,Jiang Zhu,Hayato Yoshioka,Tomohisa Tanaka,Yoshio Saito","The Utilization of Feature Extraction in Registration Method of Laser Data Sets in Reverse Engineering of Fidelity and Precision Part","The 8th International Conference on Leading Edge Manufacturing in 21st Century","Proceeding of the 8th International Conference on Leading Edge Manufacturing in 21st Century","the Japan Society of Mechanical Engineers",,,,2015,Oct.
"Jiang Zhu,Masato Kato,Hayato Yoshioka,Yoshio Saito,Tomohisa Tanaka","Research on Feature Recognition from STEP model for Automatic Process Planning of Multi-tasking Machine","The 6th International Conference of Asian Society for Precision Engineering and Nanotechnology (ASPEN2015)","Proceeding of the 6th International Conference of Asian Society for Precision Engineering and Nanotechnology (ASPEN2015)","Asian Society for Precision Engineering and Nanotechnology(ASPEN)",,,,2015,Sept.
"Yasunori Sakai,JIANG ZHU,Hayato Yoshioka,TOMOHISA TANAKA","有限要素法を用いたローラガイドの鉛直及び横方向剛性の同定","日本機械学会2015年度年次大会",,,,,,2015,Sept.
"Hayato Yoshioka,Yasuhiro Kakinuma,Norikazu Suzuki","工作機械の知能化を支えるオブザーバ技術，機械技術と切削理論応用技術",,"砥粒加工学会誌","公益社団法人 砥粒加工学会","Vol. 59","No. 9","pp. 502-507",2015,Sept.
"Jiang ZHU,Masato KATO,Tomohisa TANAKA,Hayato YOSHIOKA,Yoshio SAITO","Graph based automatic process planning system for multi-tasking machine",,"Journal of Advanced Mechanical Design, Systems, and Manufacturing","The Japan Society of Mechanical Engineers","Vol. 9","No. 3",,2015,Aug.
"Hiroshi Sawano,Yusuke Nakamura,Hayato Yoshioka,Hidenori Shinno","High performance hydrostatic bearing using a variable inherent restrictor with a thin metal plate",,"Precision Engineering",,"Vol. 41",,"pp. 78-85",2015,July
"Shigenobu Nagase,Jiang Zhu,Hayato Yoshioka,Yoshio Saito,Tomohisa Tanaka","Efficiency of the free-form surface machining with optimum tool-path for each segment","Spring Annual Meeting of the Japan Society for Procession Engineering 2015","Proceeding of Spring Annual Meeting of the Japan Society for Procession Engineering 2015","The Japan Society of Precision Engineering",,,"pp. 771-772",2015,Mar.
"Sho Harada,JIANG ZHU,TOMOHISA TANAKA,Hayato Yoshioka,YOSHIO SAITO","Research on Titanium Coloring using Laser Irradiation -Improvement repeatability in coloring marking and realization of wide color space","JSME Manufacturing Systems Division Conference 2015","Proceesing of JSME Manufacturing Systems Division Conference 2015","The Japan Society of Mechanical Engineers",,"No. 15-8","pp. 109-110",2015,Mar.
"Motochika SHIMIZU,Hiroshi SAWANO,Hayato YOSHIOKA,Hidenori SHINNO","Multi-dimensional assessment of nano/micro scale surface texture using laser speckle pattern analysis",,"Journal of Advanced Mechanical Design, Systems, and Manufacturing",,"Vol. 9","No. 1","pp. 1-13",2015,Mar.
"Huiwei Gao,Jiang Zhu,Hayato Yoshioka,Yoshio Saito,Tomohisa Tanaka","Construction of Flexible Production Scheduling System Using Autonomous Distributed Systems","Spring Annual Meeting of the Japan Society for Procession Engineering 2015","Proceeding of Spring Annual Meeting of the Japan Society for Procession Engineering 2015","The Japan Society of Precision Engineering",,,"pp. 267-268",2015,Mar.
"Daisuke Kadokura,HIDENORI SHINNO,Hayato Yoshioka,hiroshi sawano","Evaluation on surface roughness with variation of reflected light intensity","2015年度精密工学会春季大会学術講演会","2015年度精密工学会春季大会学術講演会講演論文集",,,,"pp. 195-196",2015,Mar.
"Yuuki Tamura,hiroshi sawano,Hayato Yoshioka,HIDENORI SHINNO","Nano-positioning control using magnetic flux density for giant magnetostrictive actuator","2015年度精密工学会春季大会学術講演会","2015年度精密工学会春季大会学術講演会講演論文集",,,,"pp. 565-566",2015,Mar.
"Takumi Tsumura,hiroshi sawano,Hayato Yoshioka,HIDENORI SHINNO","High stiffness aerostatic bearing in gas-liquid layered lubrication","2015年度精密工学会春季大会学術講演会","2015年度精密工学会春季大会学術講演会講演論文集",,,,"pp. 349-350",2015,Mar.
"Yasunori Sakai,Hayato Yoshioka,Jiang Zhu,Yoshio Saito,Tomohisa Tanaka","Analysis of Nonlinear Friction Induced Vibration of Rolling Guideway by Using Complex Spring","Spring Annual Meeting of the Japan Society for Procession Engineering 2015","Proceeding of Spring Annual Meeting of the Japan Society for Procession Engineering 2015","The Japan Society of Precision Engineering",,,"pp. 351-352",2015,Mar.
"Muslimin,Jiang Zhu,Hayato Yoshioka,Tomohisa Tanaka,Yoshio Saito","A New Method for Registration Laser Data Sets and CMM Data Sets in Reverse Engineering of Accurate Part","Spring Annual Meeting of the Japan Society for Procession Engineering 2015","Proceeding of Spring Annual Meeting of the Japan Society for Procession Engineering 2015","The Japan Society of Precision Engineering",,,"pp. 1101-1102",2015,Mar.
"Saurabh Bhide,Jiang Zhu,Hayato Yoshioka,Tomohisa Tanaka,Yoshio Saito","Calculation of Intersection Points between Triangulated Mesh and Point Cloud Data","Spring Annual Meeting of the Japan Society for Procession Engineering 2015","Proceeding of Spring Annual Meeting of the Japan Society for Procession Engineering 2015","The Japan Society of Precision Engineering",,,"pp. 1099-1100",2015,Mar.
"Mikiya Hara,Jiang Zhu,Hayato Yoshioka,Yoshio Saito,Tomohisa Tanaka","Study on Effect of Cutting Parameter on Accuracy of Surface in the Milling of Polytetrafluoroethylene","Spring Annual Meeting of the Japan Society for Procession Engineering 2015","Proceeding of Spring Annual Meeting of the Japan Society for Procession Engineering 2015","The Japan Society of Precision Engineering",,,"pp. 1039-1040",2015,Mar.
"Masato Kato,Jiang Zhu,Hayato Yoshioka,Yoshio Saito,Tomohisa Tanaka","Graph based automatic process planning system for multi-tasking machine","Spring Annual Meeting of the Japan Society for Procession Engineering 2015","Proceeding of Spring Annual Meeting of the Japan Society for Procession Engineering 2015","The Japan Society of Precision Engineering",,,"pp. 773-774",2015,Mar.
"Yasunori SAKAI,Tomohisa TANAKA,Hayato YOSHIOKA,Jiang ZHU,Masaomi TSUTSUMI,Yoshio SAITO","Influence of nonlinear spring behavior of friction on dynamic characteristics of a rolling guideway",,"Journal of Advanced Mechanical Design, Systems, and Manufacturing","The Japan Society of Mechanical Engineers","Vol. 9","No. 1","pp. 1-15",2015,Jan.
"Yasunori Sakai,Jiang, Z.,Hayato Yoshioka,Tanaka, T.","New identification method for dynamic characteristics of roller guideway based on finite element model",,"Proceedings - ASPE 2015 Annual Meeting",,,,"pp. 357-362",2015,
"Yuuki Tamura,Hiroshi Sawano,Hayato Yoshioka,Hidenori Shinno","A thermally stable aerostatic spindle system equipped with self-cooling function",,"Journal of Advanced Mechanical Design, Systems, and Manufacturing","The Japan Society of Mechanical Engineers","Vol. 8","No. 6","pp. 1-10",2014,Dec.
"Yasunori Sakai,JIANG ZHU,TOMOHISA TANAKA,Hayato Yoshioka,YOSHIO SAITO","Influence of Excitation Force on Damping of Rolling Guideway in Feed and Pitch Direction","the 16th International Machine Tool Engineers` Conference","Proceeding of the 16th International Machine Tool Engineers` Conference","Japan Machine Tool Builders' Association",,,,2014,Nov.
"Hiroshi Sawano,Yusuke Nakamura,Hayato Yoshioka,Hidenori Shinno","High performance hydrostatic bearing using a variable inherent restrictor","The 16th International Machine Tool Engineers' Conference","Proceedings of the 16th International Machine Tool Engineers' Conference","Japan Machine Tool Builders' Association",,,"p. 169",2014,Nov.
"yuanrui zhang,JIANG ZHU,Hayato Yoshioka,YOSHIO SAITO,TOMOHISA TANAKA","Study on the error compensation and accuracy improvement of 6-DOF parallel mechanism worktable","the 16th International Machine Tool Engineers` Conference","Proceeding of the 16th International Machine Tool Engineers` Conference","Japan Machine Tool Builders' Association",,,,2014,Nov.
"Hayato Yoshioka,Ryoichi Tanigawa,Hiroshi Sawano,Hidenori Shinno","Direct measurement of relative distance between tool and workpiece using an evanescent light","The 16th International Machine Tool Engineers' Conference","Proceedings of the 16th International Machine Tool Engineers' Conference","Japan Machine Tool Builders' Association",,,"p. 170",2014,Nov.
"Yuuki Tamura,hiroshi sawano,Hayato Yoshioka,HIDENORI SHINNO","Giant-magnetostrictive-actuated positioning system with self-sensing function","第10回 日本機械学会生産加工・工作機械部門講演会",,,,,"pp. 111-112",2014,Nov.
"Yasunori Sakai,JIANG ZHU,田中智久,Hayato Yoshioka,YOSHIO SAITO","Influence of friction in pre-rolling region on dynamic characteristics of a rolling guideway","第10回 日本機械学会生産加工・工作機械部門講演会",,,,,"pp. 97-98",2014,Nov.
"Kana Murai,hiroshi sawano,Hayato Yoshioka,HIDENORI SHINNO","Robust and high speed wide-ranging surface profile measurement based on hyper-multi-point method","第10回生産加工・工作機械部門講演会","第10回生産加工・工作機械部門講演会講演前刷集",,,,"pp. 247-248",2014,Nov.
"Yasunori SAKAI,Jiang Zhu,Tomohisa Tanaka,Hayato Yoshioka,Yoshio Saito","Influence of Hysteresis Behavior of Friction on Dynamic Characteristics of Rolling Guideway","MECHATRONICS 2014","Proceedings of MECHATRONICS 2014",,,"No. OS-000671",,2014,Nov.
"Takumi Tsumura,Hayato Yoshioka,Hidenori Shinno,Hiroshi Sawano","Magnetically preloaded aerostatic guideway for high speed nanometer positioning",,"Journal of Advanced Mechanical Design, Systems, and Manufacturing","The Japan Society of Mechanical Engineers","Vol. 8","No. 4","pp. 1-11",2014,Oct.
"Motochika Shimizu,hiroshi sawano,Hayato Yoshioka,Hidenori Shinno","Multi-dimensional assessment of precision machined surface texture based on laser speckle pattern analysis","9th CIRP Conference on Intelligent Computation in Manufacturing Engineering","Proceedings of the 9th CIRP Conference on Intelligent Computation in Manufacturing Engineering",,,,,2014,July
"Hayato Yoshioka","はじめての精密工学 精密加工におけるインプロセス計測",,"精密工学会誌",,"Vol. 80","No. 7","pp. 646-649",2014,July
"Yuichi Mizutani,hiroshi sawano,Hayato Yoshioka,Hidenori Shinno","Magnetic fluid seal for linear motion system with gravity compensator","9th CIRP Conference on Intelligent Computation in Manufacturing Engineering","Proceedings of the 9th CIRP Conference on Intelligent Computation in Manufacturing Engineering",,,,,2014,July
"Hayato Yoshioka,HIDENORI SHINNO,hiroshi sawano,Ryoichi Tanigawa","Monitoring of distance between diamond tool edge and workpiece surface in ultraprecision cutting using evanescent light",,"CIRP Annals - Manufacturing Technology","Elsevier","Vol. 63","No. 1","pp. 341-344",2014,June
"Motochika Shimizu,Hiroshi Sawano,Hayato Yoshioka,Hidenori Shinno","Surface texture assessment of ultra-precision machined parts based on laser speckle pattern analysis",,"Precision Engineering",,"Vol. 38","No. 1","pp. 1-8",2014,Jan.
"Takumi Tsumura,Hayato Yoshioka,hidenori shinno,sawano hiroshi","Magnetic Attraction Force-preloaded Aerostatic Guideway for High Speed Nano Positioning System","The 7th International Conference on Leading Edge Manufacturing in 21st Century","Proceedings of The 7th International Conference on Leading Edge Manufacturing in 21st Century",,,,,2013,Nov.
"Takuya KOMIYAMA,Hiroshi SAWANO,Hayato Yoshioka,hidenori shinno","A Long-Range Straightness Measurement with Motion Error Compensation","The 7th International Conference on Leading Edge Manufacturing in 21st Century","Proceedings of the 7th International Conference on Leading Edge Manufacturing in 21st Century",,,,,2013,Nov.
"Hiroshi Sawano,Yusuke Nakamura,Hayato Yoshioka,Hidenori Shinno","High performance hydrostatic bearing with a variable inherent restrictor","12th International Symposium in Fluid Control, Measurement and Visualization (FLUCOME 2013)","Proceedings of the 12th International Symposium in Fluid Control, Measurement and Visualization",,,"  OS19-01-3","pp. 1-7",2013,Nov.
"Hidenori SHINNO,Hayato YOSHIOKA,Hiroshi SAWANO","A Framework for Systematizing Machine Tool Engineering",,"International Journal of Automation Technology",,"Vol. 7","No. 6","pp. 760-768",2013,Nov.
"Hayato Yoshioka","超精密加工システム「ANGEL」の構造と加工事例",,"機械と工具","日本工業出版","Vol. 3","No. 8","pp. 8-12",2013,Aug.
"Hayato YOSHIOKA,Hiroshi SAWANO,Hidenori SHINNO","A newly developed rotary-linear motion platform with a giant magnetostrictive actuator",,"CIRP Annals - Manufacturing Technology",,"Vol. 62","No. 1","pp. 371-374",2013,June
"Hayato YOSHIOKA,Mamoru HAYASHI,Hiroshi SAWANO,Hidenori SHINNO","Sensorless monitoring of machining torque on tilting platform driven by hybrid actuator","13th International Conference of the European Society for Precision Engineering and Nanotechnology","Proceedings of the 13th International Conference of the European Society for Precision Engineering and Nanotechnology",,"Vol. 1",,"pp. 326-329",2013,May
"Yusuke Nakamura,hiroshi sawano,Hayato Yoshioka,HIDENORI SHINNO","High-performance hydrostatic bearing with variable inherent restrictor","2013年度精密工学会春季大会学術講演会","2013年度精密工学会春季大会学術講演会講演論文集",,,,"pp. 723-724",2013,Mar.
"Hayato Yoshioka","国際会議報告：14th International Conference on Precision Engineering (ICPE2012) 報告",,"精密工学会誌","公益社団法人 精密工学会","Vol. 79","No. 2","pp. 187-187",2013,
"HIDENORI SHINNO,hiroshi sawano,Hayato Yoshioka","高度機能集積形マザーマシンの実現をめざして","沼田記念論文賞記念講演",,,,,,2013,
"hiroshi sawano,Toshimichi Gokan,Hayato Yoshioka,HIDENORI SHINNO","STMの測定原理を応用した三次元測定機の開発","沼田記念論文賞記念講演",,,,,,2013,
"Motochika Shimizu,Hiroshi Sawano,Hayato Yoshioka,Hidenori Shinno","Surface texture assessment of ultra-precision machined parts using a laser speckle method","The 15th International Machine Tool Engineers' Conference","Proceedings of the 15th International Machine Tool Engineers' Conference","Japan Machine Tool Builders' Association",,,"pp. 102-103",2012,Nov.
"Kensuke Kuze,Hiroshi Sawano,Hayato Yoshioka,Hidenori Shinno","Hydrostatic bearing with high bulk modulus fluid","14th International Conference on Precision Engineering","Emerging Technology in Precision Engineering XIV",,"Vol. 14",,"pp. 532-537",2012,Nov.
"Yuuki Tamura,Hiroshi Sawano,Hayato Yoshioka,Hidenori Shinno","A thermally stable high speed spindle system equipped with self-cooling function","14th International Conference on Precision Engineering","Emerging Technology in Precision Engineering XIV",,"Vol. 14",,"pp. 527-531",2012,Nov.
"Hiroshi Sawano,Hayato Yoshioka,Hidenori Shinno","An ultra-precision machining system equipped with an on-machine noncontact profile measuring function","The 15th International Machine Tool Engineers' Conference","Proceedings of the 15th International Machine Tool Engineers' Conference","Japan Machine Tool Builders' Association",,,"pp. 106-107",2012,Nov.
"Ryoichi Tanigawa,Hayato Yoshioka,Hiroshi Sawano,Hidenori Shinno","Direct measurement of the distance between tool and workpiece using evanescent light","第9回生産加工・工作機械部門講演会","第9回生産加工・工作機械部門講演会講演前刷集","日本機械学会",,,"pp. 219-220",2012,Oct.
"Hidenori SHINNO,Hayato YOSHIOKA","3.3 Materials Processing",,"Introduction to Mechanical Engineering","The Japan Society of Mechanical Engineers","Vol. 1",,"pp. 116-119",2012,Oct.
"hiroshi sawano,Sho Ayada,Hayato Yoshioka,HIDENORI SHINNO","Auto balancer for a high-speed spindle using low melting temperature alloy","第9回生産加工・工作機械部門講演会","第9回生産加工・工作機械部門講演会講演前刷集","日本機械学会",,,"pp. 43-44",2012,Oct.
"Hayato Yoshioka,Hayato Ide,Hiroshi Sawano,Hidenori Shinno","Detection of contact condition between tool and workpiece with optical method","2012年度精密工学会秋季大会学術講演会","2012年度精密工学会秋季大会学術講演会講演論文集",,,,"pp. 829-830",2012,Sept.
"Hiroshi Sawano,Toshimichi Gokan,Hayato Yoshioka,Hidenori Shinno","A newly developed STM-based coordinate measuring machine",,"Precision Engineering","Elsevier","Vol. 36","No. 4","pp. 538-545",2012,July
"Hiroshi SAWANO,Hayato YOSHIOKA,Hidenori SHINNO","A newly developed nano-pattern generator equipped with an on-machine measuring function","12th International Conference of the European Society for Precision Engineering and Nanotechnology","Proceedings of the 12th International Conference of the European Society for Precision Engineering and Nanotechnology",,"Vol. 2",,"pp. 189-192",2012,June
"Motochika Shimizu,Hiroshi SAWANO,Hayato YOSHIOKA,Hidenori SHINNO","Surface texture characterization of ultra-precision machined parts based on laser speckle pattern analysis","12th International Conference of the European Society for Precision Engineering and Nanotechnology","Proceedings of the 12th International Conference of the European Society for Precision Engineering and Nanotechnology",,"Vol. 1",,"pp. 154-157",2012,June
"Hayato YOSHIOKA,Yugo KURISAKI,Hiroshi SAWANO,Hidenori SHINNO","A newly developed ripple-free precision toroidal type motor",,"CIRP Annals - Manufacturing Technology",,"Vol. 61","No. 1","pp. 363-366",2012,May
"Hayato YOSHIOKA,Yugo KURISAKI,Hiroshi SAWANO,Hidenori SHINNO","A Newly Developed Toroidal Type Torque Ripple-free Precision Motor","15th International Conference on Mechatronics Technology","Proceedings of the 15th International Conference on Mechatronics Technology",,,,"pp. 504-507",2011,Nov.
"Hayato YOSHIOKA,Yusuke FUJIKI,Hiroshi SAWANO,Hidenori SHINNO","In-process Ultrasonic Monitoring Method for Cutting Process","The 6th Internarional Conference on Leading Edge Manufacturing in 21st Century","Proceedings of The 6th Internarional Conference on Leading Edge Manufacturing in 21st Century",,,,,2011,Nov.
"Sho AYADA,Hiroshi SAWANO,Hayato YOSHIOKA,Hidenori SHINNO","Three-Dimensional Profile Measuring System with AFM Probe",,"Transactions of the Japan Society of Mechanical Engineers(JSME)","The Japan Society of Mechanical Engineers(JSME)","Vol. 77","No. 782","pp. 3597-3607",2011,Oct.
"Motochika SHIMIZU,Hiroshi SAWANO,Hayato YOSHIOKA,Hidenori SHINNO","A Developed Non-Contact Active Vibration Isolation Unit for Precision Machining Systems",,"Transactions of the Japan Society of Mechanical Engineers(JSME), Series C","The Japan Society of Mechanical Engineers","Vol. 77","No. 782","pp. 3572-3580",2011,Oct.
"H.Shinno,H.Yoshioka,H.Sawano","A newly developed long range positioning table system with a sub-nanometer resolution",,"CIRP Annals - Manufacturing Technology","Elsevier","Vol. 60","No. 1","pp. 403-406",2011,June
"Hiroshi SAWANO,Sho AYADA,Hayato YOSHIOKA,Hidenori SHINNO","A Newly Developed AFM-based Three Dimensional Profile Measuring System","11th International Conference of the European Society for Precision Engineering and Nanotechnology","Proceedings of the 11th International Conference of the European Society for Precision Engineering and Nanotechnology",,"Vol. 1",,"pp. 108-112",2011,May
"Mamoru Hayashi,Hayato YOSHIOKA,Hidenori SHINNO,Hiroshi Sawano","A Hybrid Actuator-driven Compact Tilting Motion Table System for Multi-axis Ultraprecision Machine Tool","11th International Conference of the European Society for Precision Engineering and Nanotechnology","Proceedings of the 11th International Conference of the European Society for Precision Engineering and Nanotechnology",,"Vol. 2",,"pp. 19-22",2011,May
"Hayato YOSHIOKA,Shota Kuroyama,Hiroshi Sawano,Hidenori SHINNO","Structural Design of Long Range Sub-Nanometer Positioning System","11th International Conference of the European Society for Precision Engineering and Nanotechnology","Proceedings of the 11th International Conference of the European Society for Precision Engineering and Nanotechnology",,"Vol. 1",,"pp. 367-370",2011,May
"Hiroshi Sawano,Ryosuke Kobayashi,Hayato Yoshioka,Hidenori Shinno","A Proposed Ultraprecision Machining Process Monitoring Method Using Causal Network Model of Air Spindle System",,"International Journal of Automation Technology","Fuji Technology Press","Vol. 5","No. 3","pp. 362-368",2011,Apr.
"Hiroshi Sawano,Motohiro Takahashi,Hayato Yoshioka,Hidenori Shinno,Kimiyuki Mitsu","On-Machine Optical Surface Profile Measuring System for Nano-Machining",,"International Journal of Automation Technology","Fuji Technology Press","Vol. 5","No. 3","pp. 369-376",2011,Apr.
"Hayato Yoshioka,Hidenori Shinno","Structural Design of a Newly Developed Ultraprecision Machine Tool "ANGEL"","International Symposium on Ultraprecision Engineering and Nanotechnology","Symposium Proceedings of ISUPEN 2011",,,,"pp. 48-51",2011,Mar.
"Hayato YOSHIOKA,Hidenori SHINNO","Design Concept and Structural configuration of Advanced Nano-Pattern Generator with Large Work Area"ANGEL"",,"International Journal of Automation Technology","Fuji Technology Press","Vol. 5","No. 1","pp. 38-44",2011,Jan.
"田中 忠志,遠藤 克仁,Hayato Yoshioka","大形工作機械のリーディングカンパニー",,"精密工学会誌","公益社団法人 精密工学会","Vol. 77","No. 4","pp. 345-348",2011,
"Motochika Shimizu,hiroshi sawano,Hayato Yoshioka,HIDENORI SHINNO","A developed non-contact active vibration isolation unit for precision machinery systems","第8回生産加工・工作機械部門講演会","第8回生産加工・工作機械部門講演会講演前刷集","日本機械学会",,,"pp. 315-316",2010,Nov.
"Sho Ayada,hiroshi sawano,Hayato Yoshioka,HIDENORI SHINNO","Three dimensional profile measuring system with AFM probe","第8回生産加工・工作機械部門講演会","第8回生産加工・工作機械部門講演会講演前刷集","日本機械学会",,,"pp. 171-172",2010,Nov.
"Hayato Yoshioka,Hidenori Shinno","Tribology in Ultra-Precision Machine Tools",,"Journal of Japanese Society of Tribologists",,"Vol. 55","No. 11","pp. 797-802",2010,Nov.
"Ryosuke KOBAYASHI,Hiroshi SAWANO,Hayato YOSHIOKA,Hidenori SHINNO","A Proposed Ultraprecision Machining Process Monitoring Using Causal Network Model of Air Spindle Bearing System","4th CIRP International Conference on High Performance Cutting (HPC2010), 24-26th October, 2010","4th CIRP International Conference on High Performance Cutting (HPC2010) Proceedings",,"Vol. 2",,"pp. 281-284",2010,Oct.
"Hiroshi Sawano,Yugo Kurisaki,Hayato Yoshioka,Hidenori Shinno","A Newly Developed Advanced Nano-Pattern Generator with Large Work Area","The 14th International Machine Tool Engineers' Conference","Proceedings of the 14th International Machine Tool Engineers' Conference","Japan Machine Tool Builders' Association",,,"pp. 70-71",2010,Oct.
"Hiroshi SAWANO,Motohiro TAKAHASHI,Hayato YOSHIOKA,HIdenori SHINNO,Kimiyuki MITSUI","On-Machine Shape Measuring System by Means of Optical Stylus for Nano-Machining","4th CIRP International Conference on High Performance Cutting (HPC2010), 24-26th October, 2010","4th CIRP International Conference on High Performance Cutting (HPC2010) Proceedings",,"Vol. 2",,"pp. 211-214",2010,Oct.
"Hiroshi Sawano,Toshimichi Gokan,Hayato Yoshioka,Hidenori Shinno","Three-dimensional nano-motion system for SPM-based CMM",,"Journal of Advanced Mechanical Design, Systems, and Manufacturing","The Japan Society of Mechanical Engineers","Vol. 4","No. 6","pp. 1192-1200",2010,Oct.
"Hayato Yoshioka","機械工学年鑑 加工学・加工機器 16.8加工計測",,"日本機械学会誌","日本機械学会","Vol. 113","No. 1101","p. 642",2010,Aug.
"Yugo KURISAKI,Hiroshi SAWANO,Hayato YOSHIOKA,Hidenori SHINNO","A Newly Developed X-Y Planar Nano-Motion Table System with Large Travel Ranges",,"Journal of Advanced Mechanical Design, Systems, and Manufacturing","The Japan Society of Mechanical Engineers","Vol. 4","No. 5","pp. 976-984",2010,Aug.
"Hayato Yoshioka,Hiroyuki Kobayashi,Hiroshi Sawano,Hidenori Shinno","Development of Steel Belt-Driven XY Positioning Table System","2010 International Symposium on Fexible Automation","Proceedings of 2010 International Symposium on Flexible Automation(ISFA), CD-ROM",,,,,2010,July
"Hidenori SHINNO,Hayato YOSHIOKA","A Developed Perfect Non-Contact Vertical Nano-Motion Mechanizm and Performance Evaluation",,"RC240 Research Report on Advanced Technology for Multi-Axis Controlled Multi-Task Machine Tools","Japan Society for Mechanical Engineers(JSME)",,,"pp. 41-44",2010,June
"Hayato YOSHIOKA,Hiroshi SAWANO,Hidenori SHINNO","A Newly Developed Ultraprecision Machine Tool "Angel"","euspen International Conference","Proceedings of the euspen International Conference",,"Vol. 2",,"pp. 239-242",2010,June
"Hayato YOSHIOKA,Shota Kuroyama,Hiroshi SAWANO,Hidenori SHINNO","Sub-Nanometer Positioning with a High Resolution Laser Interferometer","euspen International Conference","Proceedings of the euspen International Conference",,"Vol. 1",,"pp. 404-407",2010,June
"Hiroshi SAWANO,Toshimichi GOKAN,Hayato YOSHIOKA,Hidenori SHINNO","Three-dimensional nano-positioning system for compact CMM","euspen International Conference","Proceedings of the euspen International Conference",,"Vol. 1",,"pp. 144-147",2010,June
"Hidenori SHINNO,Hayato YOSHIOKA,Toshimichi GOKAN,Hiroshi SAWANO","A Newly Developed Three-Dimensional Profile Scanner with Nanometer Spatial Resolution",,"CIRP  Annals - Manufacturing Technology (International Academy of Production Engineering)","Elsevier","Vol. 59","No. 1","pp. 525-528",2010,June
"Hidenori SHINNO,Hayato YOSHIOKA","A Newly Developed Advanced Nano-Pattern Generator with Large Work Area",,"Mechanical Engineering","Nikkan Kogyo","Vol. 58","No. 5","pp. 18-22",2010,May
"Hayato Yoshioka,HIDENORI SHINNO","In-Process Measurement in Ultraprecision Machining",,"Mechanical Engineering","日刊工業新聞社","Vol. 58","No. 4","pp. 28-31",2010,Apr.
"Motochika SHIMIZU,Hayato YOSHIOKA,Hidenori SHINNO,Hiroshi SAWANO","A Non-contact Active Vibration Isolation Unit with Minimized Vibration Transmission Components","日本機械学会関東支部第49回学生員卒業研究発表講演会","日本機械学会関東支部第49回学生員卒業研究発表講演会講演前刷集",,,,"pp. 63-64",2010,Mar.
"Mamoru HAYASHI,Hiroshi SAWANO,Hayato YOSHIOKA,Hidenori SHINNO","Torque Error Compensation in Pneumatic Rotary Actuator System Using an Electromagnetic Force","The 5th International Conference on Leading Edge Manufacturing in 21st Century","Proceedings of the 5th International Conference on Leading Edge Manufacturing in 21st Century(LEM21)","The Japan Society of Mechanical Engineers(JSME)","Vol. 5",,"pp. 183-186",2009,Dec.
"Yugo KURIHASHI,Hiroshi SAWANO,Hayato YOSHIOKA,Hidenori SHINNO","A Newly Developed X-Y Planer Nano-Motion Table System with Large Travel Ranges","The 5th International Conference on Leading Edge Manufacturing in 21st Century","Proceedings of the 5th International Conference on Leading Edge Manufacturing in 21st Century(LEM21)","The Japan Society of Mechanical Engineers(JSME)","Vol. 5",,"pp. 187-190",2009,Dec.
"Hidenori SHINNO,Hayato YOSHIOKA","Realizing Precision on Fundamental Principles",,"Journal of Tokyo Tech Alumini Association KURAMAE JOURNAL","Tokyo Tech Alumini Association",,"No. 1015","pp. 23-26",2009,Oct.
"Hidenori SHINNO,Hayato YOSHIOKA,Mamoru HAYASHI","A High Performance Tilting Platform Driven by Hybrid Actuator",,"CIRP(International Academy for Production Engineering) Annals-Manufacturing Technology","ELSEVIER","Vol. 58","No. 1","pp. 363-366",2009,Aug.
"Hayato YOSHIOKA,Mamoru HAYASHI,Hidenori SHINNO","Status Monitoring of Ultraprecision Machining Using Micro Thermo Sensor and AE Sensor",,"International Journal of Automation Technology","Fuji Technology Press Ltd","Vol. 3","No. 4","pp. 422-427",2009,July
"M.Takahashi,H.Yoshioka,H.Shinno","Ultraprecision Machining System for Fabricating Nano-Devices","the 9th International Conference of the euspen","Proceedings of the 9th International Conference of the euspen, June 2nd-5th, 2009, San Sebastian, Spain",,"Vol. 1",,"pp. 228-231",2009,June
"M.Hayashi,H.Yoshioka,H.Sawano,H.Shinno","High Torque and High Precision Rotary Table System Driven by Hybrid Actuator",,"Proceedings of the 9th International Conference of the euspen, June 2nd-5th, San Sebastian, Spain",,"Vol. 1",,"pp. 402-405",2009,June
"Hayato Yoshioka","超精密加工機「ANGEL」の特徴と今後の展開",,"型技術","日刊工業新聞社","Vol. 24","No. 4","pp. 103-106",2009,Apr.
"HIDENORI SHINNO,Hayato Yoshioka","特集 未来技術 【超精密加工機“ANGEL”】",,"生産財マーケティング","ニュースダイジェスト社","Vol. 46","No. 1","p. A-37",2009,Apr.
"Hayato Yoshioka","マイクロ温度センサを用いた超精密切削加工の適応制御",,"日本機械学会誌","日本機械学会","Vol. 112","No. 1083","p. 143",2009,Feb.
"Hayato YOSHIOKA,Mamoru HAYASHI,Hidenori SHINNO","Adaptive Control for Ultraprecision Machining Using an In-Process Micro Thermosensor","The 13th International Machine Tool Engineers' Conference, October 30th to November 4th, 2008","Proceedings of the 13th International Machine Tool Engineers' Conference","Japan Machine Tool Builders' Association",,,"pp. 106-107",2008,Nov.
"Hidenori SHINNO,Motohiro TAKAHASHI,Hayato YOSHIOKA","Vertical Nano-Positioning Stage with Noncontact Gravity Compensator","The 13th International Machine Tool Engineers' Conference","Proceedings of the 13th International Machine Tool Engineers' Conference, October 30th to November 4th, 2008","Japan Machine Tool Builders' Association",,,"pp. 64-65",2008,Nov.
"Mamoru HAYASHI,HayatoYOSHIOKA,Hidenori SHINNO","A Newly Developed High Torque and High Precise Indexing Mechanism with Hybrid-Actuator","The 7th Manufacturing & Machine Tool Conference, JSME","Proceedings of the 7th JSME Manufacturing & Machine Tool Conference",,,"No. 08-19","pp. 207-208",2008,Nov.
"Hidenori SHINNO,Hayato YOSHIOKA","A Developed Noncontact Vertical Nano-motion Table System for Ultraprecision Machining",,"Research Report on the 28th Research Projects","The Machine Tool Engineering Foundation",,,"pp. 1-33",2008,Aug.
"Hayato Yoshioka","研究室訪問 新たなシーズを求めて",,"機械設計","日刊工業新聞社","Vol. 52","No. 9","pp. 76-77",2008,July
"Hidenori SHINNO,Hayato YOSHIOKA","Linear Motor-driven Aerostatic X-Y Planar Motion Table System for Nano-machining",,"JSME Research Committee on Advanced Technologies for Multi-axis Machine Tools","The Japan Society of Mechanical Engineers",,,"pp. 23-28",2008,June
"Motohiro TAKAHASHI,Hayato YOSHIOKA,Hidenori SHINNO","A Newly Developed Long-Stroke Vertical Nano-Motion Platform with Gravity Compensator",,"Journal of Advanced Mechanical Design, Systems, and Manufacturing","the Japan Society of Mechanical Engineers","Vol. 2","No. 3","pp. 356-365",2008,June
"Mamoru HAYASHI,Hayato YOSHIOKA,Hidenori SHINNO","An Adaptive Control of Ultraprecision Machining with an In-Process Micro-Sensor",,"Journal of Advanced Mechanical Design, Systems, and Manufacturing",,"Vol. 2","No. 3","pp. 322-331",2008,June
"Nobuhiko TAKAHASHI,Hayato YOSHIOKA,Hidenori SHINNO","Study on Nano-Machining of Hard and Brittle Material with Focused Ion Beam",,"Journal of the Japan Society for Precision Engineering","Journal of the Japan Society for Precision Engineering","Vol. 74","No. 5","pp. 491-497",2008,May
"Yoshioka, H.,Takahashi, M.,Shinno, H.","Vertical Nano-Positioning System for Precision Machine","10th Anniversary International Conference of the European society for Precision Engineering and Nanotechnology","Proceedings of 10th Anniversary International Conference of the Europan Society for Precision Engineering and Nanotechnology",,"Vol. 1",,"pp. 372-375",2008,May
"Hayato Yoshioka","完全非接触XY平面位置決めテーブルを用いた微細加工",,"日本機械学会誌","日本機械学会","Vol. 111","No. 1071","p. 129",2008,Feb.
"Hayato Yoshioka,Toshimichi Gokan,Hidenori Shinno","Design and Nanomotion Control of a Noncontact Stage with Squeeze Bearings",,"International Journal of Automation Techonology","Fuji technology Press Ltd.","Vol. 2","No. 1","pp. 18-23",2008,Jan.
"Hidenori SHINNO,Hayato YOSHIOKA","Hardware technology for ultraprecision machining system",,"Science of Machine","YOKENDO,LTD","Vol. 60","No. 1","pp. 67-72",2008,Jan.
"Hidenori SHINNO,Hayato YOSHIOKA","Pneumatics & Ultrapresion Machining - Three-dimensional Nano Machining  Using Pneumatics",,"Hydraulics & Pneumatics","Nikko-pb","Vol. 47","No. 1","pp. 1-6",2008,Jan.
"Mamoru HAYASHI,Hayato YOSHIOKA,Hidenori SHINNO","An Adaptive Control of Ultraprecision Machining with an In-Process Micro-Sensor","The 4th International Conference on Leading Edge Manufacturing in 21st Century(LEM21)","Proceedings of the 4th International Conference on Leading Edge Manufacturing in 21st Century(LEM21)","The Japan Society of Mechanical Engineers(JSME)","Vol. 07","No. 205","pp. 131-136",2007,Nov.
"Motohiro TAKAHASHI,Hayato YOSHIOKA,Hidenori SHINNO","Vertical Nano-Positioning System with Gravity Compensator","The 4th International conference on Leading Edge Manufacturing in 21st Century(LEM21)","Proceedings of the 4th International conference on Leading Edge Manufacturing in 21st Century(LEM21)","The Japan Society of Mechanical Engineers(JSME)","Vol. 07","No. 205","pp. 181-186",2007,Nov.
"Toshimichi GOKAN,Hayato YOSHIOKA,Hidenori SHINNO","A Newly Developed Compact Nano-Positioning Table System Using Squeeze Bearing","The 4th International conference on Leading Edge Manufacturing in 21st Century(LEM21)","Proceedings of the 4th International conference on Leading Edge Manufacturing in 21st Century(LEM21)","The Japan Society of Mechanical Engineers(JSME)","Vol. 07","No. 205","pp. 177-180",2007,Nov.
"Hidenori SHINNO,Hayato YOSHIOKA","A Newly Develped Linear Motor-Driven Aerostatic X-Y Planar Motion Table System for Nano-Machining",,"Annals of the CIRP(Annals of the International Academy for Production Engineering)","Elsevier Ltd.","Vol. 56","No. 1","pp. 369-372",2007,Aug.
"Noboru WATANABE,Hidenori SHINNO,Hayato YOSHIOKA","Development of a Novel Vertical CNC Multiple-Function Integrated Grinding Machine",,"Journal of Advanced Mechanical Design, Systems, and Manufacturing(JAMDSM)",,"Vol. 1","No. 3","pp. 328-337",2007,June
"Yoshioka, H.,Takahashi. M.,Gokan. T.,Shinno, H.","A newly developed linear motor-driven ultrasonic levitation nano-positioning table system","7th International Conference of the European Society for Precision Engineering and Nanotechnology (euspen)","Proceedings of the 7th euspen International Conference",,"Vol. II",,"pp. 145-148",2007,May
"Hayato Yoshioka","今に花咲き実を結ぶ",,"月刊・生産財マーケティング","ニュースダイジェスト社","Vol. 44","No. 5","pp. A-62",2007,May
"Hidenori SHINNO,Hayato YOSHIOKA","A Developed Ultraprecision and Ultrafine Machining System","JSME Lecture Course","JSME Lecture Course on Fluid Power System Technology Applied to Production System","Japan Society for Mechanical Engineers","Vol. 07","No. 11","pp. 19-24",2007,Mar.
"Hidenori SHINNO,Hayato YOSHIOKA","Fluid Power System for Realizing Ultraprecision and Ultrafine Machining",,"Journal of the Japan Fluid Power System Society","The Japan Fluid Power System Soiety","Vol. 38","No. 2","pp. 68-72",2007,Mar.
"H.Yoshioka,Y.Ono,H.Shinno","XY Planar Positioning Table System for Nano-Processing","The 12th International Machine Tool Engineers Conference","New Technologies of Machine Tool and Manufacturing",,,,"pp. 54-55",2006,Nov.
"Yoshioka, H.,Hirabayashi, T.,Shinno, H.","Air Turbine Driven Aerostatic Spindle System for Nano-Machining","The 12th International Machine Tool Engineers Conference","New Technologies of Machine Tool and Manufacturing","Japan Machine Tool Builders' Association",,,"pp. 52-53",2006,Nov.
"H.Arima,H.Yoshioka,H.Shinno","Development of an Ultraprecision Planar Positioing Table System with a Belt Driven Mechanism","日本機械学会第６回生産加工・工作機械部門講演会","Japan Society of Mechanical Engineers",,"Vol. 06","No. 34","pp. 153-154",2006,Nov.
"T.Gokan,H.Yoshioka,H.Shinno","Development of Ultrasonic Levitation Table System Driven by Linear Motor","日本機械学会第６回生産加工・工作機械部門講演会","Japan Society of Mechanical engineers",,"Vol. 06","No. 34","pp. 151-152",2006,Nov.
"Hidenori SHINNO,Hayato YOSHIOKA,Sihar MARPAUNG","A Structured Method for Analysing Product Specification in Product Planning for Machine Tools",,"Journal of Engineering Design",,"Vol. 17","No. 4","pp. 347-356",2006,Aug.
"Hayato YOSHIOKA,Hidenori SHINNO","Development and Performance Evaluation of Nanometer Planar Positioning Table System",,"JSME RC216 Research Committee on Multiple Axix Controlled Machine Tools and Their Application Technology",,,,"pp. 71-74",2006,Aug.
"Hayato YOSHIOKA,Simpei MATSUMURA,Hitoshi HASHIZUME,Hidenori SHINNO","Minimizing Thermal Deformation of Aerostatic Spindle System by Temperature Control of Supply Air",,"JSME International Journal, Series C",,"Vol. 49","No. 2","pp. 606-611",2006,June
"Hidenori SHINNO,Hayato YOSHIOKA,Sihar Marpaung,Soichi HACHIGA","Quantitative SWOT Analysis on Global Competitiveness of Machine Tool Industry",,"Journal of Engineering Design",,"Vol. 17","No. 3","pp. 251-258",2006,June
"H.Yoshioka,K.Taniguchi,H.Shinno","A Novel Linear Motor Driven Aerostatic Planar Positioning Table System for Nano-Machining","The 6th International conference european society for precision engineering and nanotechnology(euspen)","Proceedings of the 6th International conference european society for precision engineering and nanotechnology",,"Vol. 1",,"pp. 305-308",2006,May
"Hayato YOSHIOKA,Hidenori SHINNO","Nano Positioning Table System of Noncontact Type Using Ultrasonic Vibration",,"Ultrasonic Technology",,"Vol. 18","No. 3","pp. 48-51",2006,May
"H.Yoshioka,T.Hayakawa,H.Shinno","Analysis on Nano-machinability in Ultraprecision Machining of Brittle Materials","The 3rd International Conference on Leading Edge Manufacturing in 21th century","The Japan Society of Mechanical Engineers",,"Vol. 3",,"pp. 1133-1138",2005,Oct.
"松下幸生,吉岡勇人,橋詰等,新野秀憲","マイクロセンサ搭載工具によるナノ加工","山梨講演会","山梨講演会講演論文集",,,,"pp. 113-114",2005,Oct.
"H.Yoshioka,M.Okubo,H.Hashizume,H.Shinno","A Developed Ultraprecision Air Spindle System for Nano-machining","ASPE 20th Annual Meeting","Proceedings of the ASPE 2005 Annual Meeting",,"Vol. 37",,"pp. 126-129",2005,Oct.
"高橋信彦,吉岡勇人,新野秀憲","硬ぜい材料のイオンビーム加工における微細加工特性","山梨講演会","山梨講演会講演論文集",,,,"pp. 111-112",2005,Oct.
"谷口浩一,吉岡勇人,橋詰等,新野秀憲","超微細加工プロセス用完全非接触XY運動テーブルシステムの開発","2005年度精密工学会秋季大会","2005年度精密工学会秋季大会　講演論文集",,,,"pp. 43-44",2005,Sept.
"栗山健太朗,石上雄三,吉岡勇人,橋詰等,新野秀憲","コンパクト構造ナノ位置決めテーブルシステムの開発","2005年度精密工学会秋季大会","2005年度精密工学会秋季大会　講演論文集",,,,"pp. 873-874",2005,Sept.
"Takahashi, M.,Hayato Yoshioka,Hashizume, H.,Shinno, H.","Advanced Non-contact Nano-Positioning Table System Using Ultrasonic Oscillation","２００５年度精密工学会秋季大会学術講演会","Proceedings of JSPE 2005 Autumn Annual Assembly",,,,"pp. 859-860",2005,Sept.
"マルパウン・シハル,大久保麻友,吉岡勇人,橋詰等,新野秀憲","ナノ加工用熱変形抑制高速回転主軸の開発","2005年度精密工学会秋季大会","2005年度精密工学会秋季大会　講演論文集",,,,"pp. 31-32",2005,Sept.
"Hayato Yoshioka,HITOSHI HASHIZUME,HIDENORI SHINNO,TADAHIKO SHINSHI,KAIJI SATO","Ultraprecision XY positioning table for nano manufacturing systems",,"日本機械学会第５回生産加工・工作機械部門講演会講演論文集",,,"No. 04-3","pp. 103-104",2004,Nov.
"Yoshioka, H.,Komatsu, K.,Hashizume, H.,Shinno, H.,Shinshi, T.,Sato, K.","A Planar Nano-positioning Table System for Advanced Machine Tools",,"Proceedings of ASPE’s 19th Annual Meeting",,"Vol. 34",,"pp. 64-67",2004,Oct.
"HITOSHI HASHIZUME,小松航,Hayato Yoshioka,HIDENORI SHINNO,TADAHIKO SHINSHI,KAIJI SATO","XY Nano Positioning Table System",,"日本機械学会2004年度年次大会講演論文集",,"Vol. 4","No. 04-1","pp. 63-64",2004,Sept.
"H.Shinno,H.Hashizume,H.Yoshioka,K.Komatsu,T.SHINSHI,K.SATO","X-Y-θ Nano-Positioning Table System for a Mother Machine",,"Annals of the CIRP",,"Vol. 53","No. 1","pp. 337-340",2004,Aug.
"吉岡勇人,松村晋平,橋詰等,新野秀憲","給気温度制御による空気静圧主軸の熱変形抑制",,"日本機械学会論文集(C編)",,"Vol. 70","No. 700","pp. 3605-3610",2004,
"H.Yoshioka,H.Hashizume,H.Shinno","In-process microsensor for ultraprecision machining",,"IEE Proceedings - Science, Measurement and Technology",,"Vol. 151","No. 2","pp. 121-125",2004,
"H.Shinno,H.Hashizume,H.Yoshioka,K.Komatsu,T.Shinshi,K.Sato","X-Y-θ Nano-Positioning Table System for a Mother Machine",,"Annals of the CIRP(Annals of the International Institution for Production Engineering Research)",,"Vol. 53","No. 1","pp. 337-340",2004,
"吉岡勇人,平間宣孝,橋詰等,新野秀憲","Status Monitoring during Ultraprecision Cutting using a Micro Thermopile",,"日本機械学会2004年度年次大会講演論文集",,"Vol. 4",,"pp. 297-298",2004,
"松村晋平,吉岡勇人,橋詰等,新野秀憲","給気温度制御による空気静圧主軸の熱変形抑制",,"2003年度精密工学会秋季大会学術講演会講演論文集",,,,"pp. 153",2003,
"下田寛,吉岡勇人,橋詰等,新野秀憲","ボイスコイルモータを用いた粗微動位置決め",,"2003年度精密工学会秋季大会学術講演会講演論文集",,,,"pp. 423",2003,
"H.Shinno,H.Hashizume,H.Yoshioka","Sensor-less Monitoring of Cutting Force during Ultraprecision Machining",,"Annals of the CIRP",,"Vol. 52","No. 1","pp. 303",2003,
"Hayato Yoshioka","Study on Status Monitoring for Ultraprecision Cutting Process",,,,,,,2002,Dec.
"Hayato Yoshioka","An In-Process Micro-Sensor for Ultraprecision Machining",,"Proceedings of the 3rd euspen International Conference",,"Vol. 2",,"pp. 729-732",2002,