"Chan-Ying Lin,Minho Oh,Equo Kobayashi,Chih-Ming Chen,Yu-An Shen","Investigating microstructure and interfacial stability of Bi-enhanced Sn-9Zn alloy on electroplated Cu during aging",,"Materials Science in Semiconductor Processing",,"Volume 18",," 109046",2025,Feb.
"Naru Tokunaga,Minho O,Equo Kobayashi","Effects of Ag and Bi additions on growth kinetics of intermetallic compounds","日本金属学会2024年秋季講演大会",,,,,,2024,Sept.
"Suzuka Abe,Minho Oh,Equo Kobayashi","Effect of In addition on the reactive diffusion between Sn-Bi-In alloys and Cu","日本金属学会2024年秋季講演大会",,,,,,2024,Sept.
"Minho Oh,Kazuki Matsushita,Equo Kobayashi,Masanori Kajihara","The growth kinetics of intermetallic compounds by the fast diffusion path at the interface of Co and molten Zn",,"Journal of Molecular Liquids",,"Volume 413",," 125966",2024,Sept.
"Minho Oh,Hayao Sakaguchi,Equo Kobayashi,Masanori Kajihara","Understanding intermetallic compound growth at Ag/Zn interfaces: Kinetics and mechanisms",,"Intermetallics",,"Volume 172",," 108378",2024,Sept.
"Minho Oh,Hee-Soo Kim,Equo Kobayashi,Masanori Kajihara","Understanding Kirkendall effect in Ni(W) diffusion-induced recrystallization region",,"Journal of Alloys and Compounds",,"Volume 991",," 174556",2024,July
"Taisei Masuda,Minho Oh,Equo Kobayashi","Fabrication and Characterization of Biomedical Ti-MgComposites via Spark Plasma Sintering",,"Materials",," 17"," 14"," 3470",2024,July
"Minho Oh,Hee-Soo Kim,Equo Kobayashi,Masanori Kajihara","Kirkendall voids in Ni(W) Diffusion-Induced Recrystallization","20th International Conference on Diffusion in Solids and Liquids, DSL 2024",,,,,,2024,June
"Y Rhee,E Thronsen,O Ryggetangen,CD Marioara,R Holmestad,E Kobayashi","Effect of pre-deformation on precipitation in Al?Zn?Mg?Cu alloy",,"Metals and Materials International",,,,,2024,June
"Minho Oh,Naru Tokunaga,Equo Kobayashi","Reactive diffusion at the interface between Cu and Sn?Ag alloys",,"Journal of Materials Research and Technology",,"Volume 30",,"Page 9531-9541",2024,June
"MY Song,E Kobayashi,JH Kim","Parameter optimization in cluster identification algorithms for characterizing nanoclusters in Al-Mg-Si-Cu alloys",,"Microscopy and Microanalysis",,,,,2024,May
"MY Song,E Kobayashi,JH Kim","Parameter optimization in cluster identification algorithms for characterizing nanoclusters in Al-Mg-Si-Cu alloys",,"Microscopy and Microanalysis",,,,,2024,May
"Hee-Soo Kim,Minho Oh,Equo Kobayashi,Masanori Kajihara","Formation of Kirkendall voids in a Ni-W system","2024 Spring Conference of the Korea Institute of Metals and Materials",,,,,,2024,Apr.
"Minho O,Yuki Tanaka,Equo Kobayashi","Growth Kinetics and Morphological Evolution of Compounds in Cu-Eutectic Sn-Bi Alloy System with Ag and Ni","TMS 2024 153rd Annual Meeting & Exhibition",,,,,,2024,Mar.
"Minho Oh,Hiroka Iwamoto,Equo Kobayashi","Influence of carbon nanotubes on the morphology of Cu6Sn5 in Cu/(Sn?Ag?Cu) solder joints",,"Results in Materials",,"Volume 21",," 100553",2024,Mar.
"Minho O,Hee-soo Kim,Equo Kobayashi,Masanori Kajihara","Formation of Kirkendall voids in Ni(W) Diffusion-Induced Recrystallization","2024 JIMM spring meeting (174rd)",,,,,,2024,Mar.
"MY Song,E Kobayashi,JH Kim","Clustering evolution during low temperature aging and thermal stability during two-step aging in Al-Mg-Si alloys",,"Journal of Alloys and Compounds",,"Vol. 964",,"p. 169291",2024,Jan.
"Minho O,Koki Sato,Equo Kobayashi","Investigation of the rate-controlling process of intermetallic layer growth at the interface between ferrous metal and molten Al?Mg?Si alloy",,"Intermetallics",,"Volume 163",," 108069",2023,Dec.
"福澤宏基,石井裕樹,小林純也,Equo Kobayashi,大沼正人,倉本繁,伊藤吾朗","Al-Mg-Si 系合金冷間圧延材の引張特性に及ぼす合金組成と時効条件の影響",,"軽金属",,"Vol. 73","No. 12","pp. 592-5979",2023,Dec.
"Yuya Tateishi,Taisei Masuda,Equo Kobayashi,Minho O","放電プラズマ焼結法で作製したTi/β-TCP複合材料とβ-TCP溶出後の多孔質Tiの機械的特性","2023年度軽金属学会第145 回秋期大会",,,,,,2023,Nov.
"Kento Kubota,Equo Kobayashi,Minho O","Hfを添加したCu-Ti合金の組織と時効挙動","2023年度日本銅学会第63回講演大会",,,,,,2023,Nov.
"Minho O,Taisei Masuda,Equo Kobayashi","放電プラズマ焼結による均一な生体用 Ti-Mg 複合材料の作製ならびに 複合材料に及ぼす焼結条件の影響","第 3 回日本チタン学会 講演大会 （2023 年度）",,,,,,2023,Nov.
"Minho O,Yuki Tanaka,Equo Kobayashi","Growth behavior of intermetallic layers at the interface between Cu and eutectic Sn?Bi by grain boundary diffusion with the grain growth at solid-state temperatures",,"Intermetallics",,"Volume 161",," 107986",2023,Oct.
"Naru Tokunaga,Minho O,Equo Kobayashi","Effects of Ag addition on growth kinetics of intermetallic compounds at the interface between Sn-Cu and Cu","2023 JIMM autumn meeting (173rd)",,,,,,2023,Sept.
"Minho O,Yuki Tanaka,Equo Kobayashi","Reactive diffusion between Cu and eutectic Sn-Bi alloy","2023 JIMM autumn meeting (173rd)",,,,,,2023,Sept.
"Minho O,Yuki Tanaka,Equo Kobayashi","Microstructure evolution at the interface between Cu and eutectic Sn-Bi alloy with the addition of Ag or Ni",,"Journal of Materials Research and Technology",,"Volume 26",,"Page 8165-8180",2023,Sept.
"E Kobayashi,M Ohnuma,S Kuramoto,J Kobayashi,G Itoh","Nanoscale analysis of solute distribution in ultrahigh-strength aluminum alloys",,"Materials Transaction",,"Vol. 64","No. 7","pp. 1441-1448",2023,July
"Le Thi Trang,Hai Van Le,Sachiko Hiromoto,Minho O,Equo Kobayashi,Nam Viet Nguyen,Nguyen Quang Cao","In vitro cellular biocompatibility and in vivo degradation behavior of calcium phosphate-coated ZK60 magnesium alloy",,"Biomedical Materials",,"Volume 18"," 3"," 035003",2023,Mar.
"Yuki Tanaka,Minho O,Equo Kobayashi","Effect of Ag Addition on the Reactive Diffusion Between Eutectic Sn-Bi and Cu at 393K",,"Proceedings of 29th Symposium on "Microjoining and Assembly Technology in Electronics"",,"Vol. 29",,"pp. 190-194",2023,Jan.
"Yuki Tanaka,Minho O,Equo Kobayashi","Sn-Bi共晶合金とCuの反応拡散に及ぼす添加元素の影響","第19 回 ヤングメタラジスト研究交流会","第19 回 ヤングメタラジスト研究交流会 講演概要集",,,,,2022,Nov.
"Hiroka Iwamoto,Minho O,Equo Kobayashi","CNT添加によるSn-Ag-CuとCuの接合界面における影響","第19 回 ヤングメタラジスト研究交流会","第19 回 ヤングメタラジスト研究交流会 講演概要集",,,,,2022,Nov.
"Taisei Masuda,Minho O,Equo Kobayashi","Ti-Mg 複合材料の組織と機械的性質に及ぼすMg 添加量の影響ならびに Mg 溶解によるメカニカルインテグリティの評価","第19 回 ヤングメタラジスト研究交流会","第19 回 ヤングメタラジスト研究交流会 講演概要集",,,,,2022,Nov.
"Taisei Masuda,Minho O,Equo Kobayashi","Microstructure and mechanical properties of Ti-Mg composites fabricated by spark plasma sintering and porous Ti after Mg dissolution","軽金属学会第143回秋期大会","143回秋期大会公園概要",,,," 77",2022,Nov.
"Kaisei Saito,Naoto Kirekawa,Minho O,Equo Kobayashi","Aging behavior of cold-rolled Al-0.6Mg-1.0Si-0.5Cu alloy after cluster formation through natural againg or pre-aging at 100℃","軽金属学会第143回秋期大会","143回秋期大会公園概要",,,," 27",2022,Nov.
"Hiroka Iwamoto,Minho O,Equo Kobayashi","Effect of MWCNT on the growth behavior of the compound at Sn-Ag-Cu solder joints","The Japan Institute of Metals and Materials 171th annual fall meeting",,,,,,2022,Sept.
"Yuki Tanaka,Minho O,Equo Kobayashi","Effect of Ag and Ni addition in Sn-58Bi eutectic alloy","The Japan Institute of Metals and Materials 171th annual fall meeting",,,,,,2022,Sept.
"Le Thi Trang,Nguyen Quang Cao,Sachiko Hiromoto,Minho O,Equo Kobayashi","Formation and corrosion behavior of calcium phosphate coating layers on ZK60 alloy coated at various pH conditions by chemical conversion method",,"Surface and Coatings Technology",," 444",," 128639",2022,Aug.
"Q Zhang,P Zhu,S Qu,ZJ Wang,HS Gou,SV. Shil'ko,E Kobayashi,GH Wu","Effect of interface structure on thermal properties and stability of dia-mond/aluminum composites",,,,"Vol. 162",,"p. 107161",2022,Aug.
"Xuanliang Chen,Minho O,Equo Kobayashi","Enhanced mechanical properties in an Al-Mg-Cu alloy processed by the combination of cyclic deformation and aging heat treatment",,"Journal of Alloys and Compounds",,"Vol. 911",," 165070",2022,Aug.
"YSF Lantang,E Kobayashi,T Sato","Fabrication of Spark Plasma Sintered Porous Ti-6Al-4V using PCA added Space Holder Method for Bone Implant Materials",,,,"Vol. 66","No. 5","pp. 2693-2701",2022,July
"LE Thi Trang,CAO Quang Nguyen,Sachiko HIROMOTO,Minho O,Equo KOBAYASHI,NGUYEN Viet Nam","In vitro and in vivo biocompatibility of ZK60 magnesium alloy calcium-phosphate coated at different pH conditions","軽金属学会第142回春期大会","講演概要",,,," 67-68",2022,May
"Yuki Tanaka,Minho O,Equo Kobayashi","Reactive diffusion at the bonding interface between Cu and eutectic Sn-Bi alloy by reflow","The Japan Institute of Metals and Materials 170th annual spring meeting",,,,,,2022,Mar.
"P Zhu,PP Wang,PZ Shao,X Lin,ZY Xiu,Q Zhang,E Kobayashi,GH Wu","Research progress of interface modification and thermal conduction behavior of diamond/metal composites",,"International Journal of Minerals, Metallurgy and Materials",,"Vol. 29","No. 2","pp. 200-211",2022,Feb.
"H Fukutomi,K Okayasu,Y Onuki,M Hasegawa,E Kobayashi,B Strnadel,O Umezawa","Dynamic Grain Growth Mechanism Enabling the Control of Microstructure and Tex-ture by High Temperature Deformation: Experimental Evidence and Applicability",,"Materials Transactions",,"Vol. 63","No. 2","pp. 148-156",2022,Feb.
"Minho O,Haruka Fujita,Equo Kobayashi,Masanori Kajihara","Kinetics and thermodynamics of compound growth due to reactive diffusion between solid Cu and binary Bi-Sn alloys",,"Journal of Molecular Liquids",,"Volume 348",," 118063",2022,Feb.
"DH Kim,JH Kim,YW Kim,JY Jeon,E Kobayashi","Local elongation of high Fe-containing Al-Si-Cu-Mg alloy by a deformation-semisolid extrusion process",,"Materials Letters",,"Vol. 309",,"p. 131337",2022,Jan.
"Naoto Kirekawa,Kaisei Saito,Minho O,E Kobayashi","Effect of Cold Rolling on Cluster(1) Dissolvability during Artificial Aging and Formability during Natural Aging in Al-0.6Mg-1.0Si-0.5Cu Alloy",,"Metals",,"Vol. 12","No. 1","p. 2010092",2022,Jan.
"Naoto Kirekawa,Minho O,小林純也,大沼正人,倉本繁,伊藤吾朗,Equo Kobayashi","Al-0.6Mg-1.0Si-0.5Cu合金の時効析出挙動に及ぼす90%冷間圧延の影響",,"軽金属",," 71"," 12",,2021,Dec.
"Equo Kobayashi,大沼正人,倉本繁,小林純也,伊藤吾朗","高強度アルミニウム合金中の溶質配置のナノスケール解析?軽金属奨学会2019 年度統合的先端研究の成果?",,"軽金属",,"Vol. 71","No. 12",,2021,Dec.
"三浦永理,菊池丈幸,Equo Kobayashi","SPS 法によるTi/β-TCP 複合材作製の課題と粉末のカスタマイズによる焼結性改善へのアプローチ",,"粉体工学会誌",,"Vol. 58","No. 11","pp. 604?612",2021,Nov.
"LE Thi Trang,CAO Quang Nguyen,Sachiko HIROMOTO,Minho O,Equo KOBAYASHI","Controlling formation of Calcium Phosphate coatings and their in-vitro degradation behaviour in alpha-MEM solution with various pH conditions","軽金属学会第141回秋期大会","講演概要",,,," 199-200",2021,Nov.
"Naoto KIREKAWA,Kaisei SAITO,Minho O,Equo KOBAYASHI","Effect of cold-rolling on precipitation behavior of Al-0.6Mg-1.0Si-0.5Cu alloy during artificial aging after natural aging","軽金属学会第141回秋期大会","講演概要",,,," 211-212",2021,Nov.
"Yuki TOMIDA,Minho O,Jun’ya KOBAYASHI,Masato OHNUMA,Shigeru KURAMOTO,Goroh ITOH,Equo KOBAYASHI","Age hardening behavior and precipitates in 90 % cold rolled Al-4Cu-3Mg alloy","軽金属学会第141回秋期大会","講演概要",,,," 207-208",2021,Nov.
"Taisei MASUDA,Ikuho NAKAHATA,Trang Thi LE,Minho O,Equo KOBAYASHI","Mechanical properties of biomedical Ti-Mg composites fabricated by Spark Plasma Sintering and their mechanical integrity in a pseudo-physiological solution","軽金属学会第141回秋期大会","講演概要",,,," 25-26",2021,Nov.
"Le Thi Trang,Cao Quang Nguyen,Sachiko Hiromoto,Minho O,Equo Kobayashi","Investigation of corrosion behavior of calciumphosphate coated ZK60 alloy in α-MEM+FBS solution","第18回ヤングメタラジスト研究交流会","第18回ヤングメタラジスト研究交流会 講演概要集",,,,,2021,Oct.
"Koki Sato,Minho O,Equo Kobayashi","固相Fe合金と液相Al-Mg-Si合金の界面における金属間化合物の成長挙動","第18回ヤングメタラジスト研究交流会","第18回ヤングメタラジスト研究交流会 講演概要集",,,,,2021,Oct.
"Yuan Jiang,Wataru Mizoh,Minho O,Equo Kobayashi","Cu-Ti-Nd三元状態図中のCu固溶体周辺相関係の検討","日本銅学会 第61回講演大会",,,,,,2021,Oct.
"Xuanliang Chen,Eva Anne Mortsell,Jonas Kristoffer Sunde,Minho O,Calin Daniel Marioara,Randi Holmestad,Equo Kobayashi","Enhanced mechanical properties in 6082 aluminum alloy processed by cyclic deformation",,"Metals",," 11",," 1735",2021,Oct.
"Yuki Tomida,Minho O,小林純也,大沼正人,倉本繁,伊藤吾朗,Equo Kobayashi","90%冷間圧延したAl-4Cu-3Mg合金の時効析出挙動と析出物","第18回ヤングメタラジスト研究交流会","第18回ヤングメタラジスト研究交流会 講演概要集",,,,,2021,Oct.
"Koki Sato,Minho O,Equo Kobayashi","Reactive diffusion at the interface between solid Fe and liquid Al-Mg-Si alloys","日本金属学会2021年秋期(第169回)講演大会",,,,,,2021,Sept.
"P Zhu,Q Zhang,HS Gou,PP Wang,PZ Shao,Equo Kobayashi,GH Wu","First-principles calculation of diamond/Al interface properties and study of interface reaction",,"Acta Physica Sinica",,"Vol. 70","No. 17"," 178101",2021,Sept.
"Dinh Ngoc Pham,Sachiko Hiromoto,Tomohiko Yamazaki,Minho O,Equo Kobayashi","Enhanced Corrosion Resistance and In Vitro Biocompatibility of Mg- Zn Alloys by Carbonate Apatite Coating",,"ACS Applied Bio Materials",," 4",," 6881-6892",2021,Aug.
"DH Kim,JH Kim,E Kobayashi","Enhanced mechanical properties of Al?Si?Cu?Mg(-Fe) alloys by a deformation-semisolid extrusion process",,"Materials Science & Engineering A",,,," 141667",2021,July
"DN Pham,S Hiromoto, M O,E Kobayashi","Influence of Substrate Microstructure on Hydroxyapatite Coating and Corrosion Be-havior of Coated Mg-Zn Alloys",,"Surface & Coatings Technology",,"Vol. 421",," 127414",2021,June
"Equo Kobayashi","Effect of pre-deformation on age-hardening behaviors in an Al-Mg-Cu alloy",,"Materials Science & Engineering A",,"Vol. 820",," 141557",2021,June
"李有眞,Minho O,小林純也,大沼正人,倉本繁,伊藤吾朗,Equo Kobayashi","90%冷間圧延を施したAl-xZn-2Mg(x=4.5,5.5,8)合金の時効析出挙動のTEM観察","軽金属学会 第140回春期大会",,,,,,2021,May
"Naoto Kirekawa,Minho O,小林純也,大沼正人,倉本繁,伊藤吾朗,Equo Kobayashi","6000系アルミニウム合金T6処理材と強加工材の時効析出挙動とHRTEM観察組織の比較","軽金属学会 第140回春期大会",,,,,,2021,May
"Xuanliang Chen,Ikuho Nakahata,Minho O,Equo Kobayashi","繰り返し変形により形成したクラスターおよび転位ループがAl-Mg-Cu合金押出材の力学的性質に及ぼす影響","軽金属学会 第140回春期大会",,,,,,2021,May
"塩田正彦,織田和宏,惣田裕司,Equo Kobayashi,岸本幸弘","Development of high Young's modulus and low linear expansion coefficient aluminum alloys for diecasting",,"鋳造工学",,"Vol. 93","No. 4","pp. 199-203",2021,Apr.
"Minho O,Koki Sato,Equo Kobayashi","Reaction diffusion between solid Fe and liquid Al alloys","The 181st ISIJ meeting","日本鉄鋼協会春期講演大会",,,,,2021,Mar.
"Koki Sato,Minho O,Equo Kobayashi","Growth behavior of intermetallic compounds due to the reaction diffusion between solid Fe and liquid Al alloys","2021 JIM Spring meeting (168th)",,,,,,2021,Mar.
"Minho O,Hayao Sakaguchi,Equo Kobayashi,Masanori Kajihara","Multi-phase solid-state reactive diffusion between Ag and Zn","2021 JIM Spring meeting (168th)",,,,,,2021,Mar.
"DN Pham,S Hiromoto,E Kobayashi","Influences of Zinc Content and Solution Heat Treatment on Microstructure and Cor-rosion Behavior of Mg-Zn Binary Alloys",,"Corrosion",,"Vol. 77","No. 3","pp. 323-338",2021,Mar.
"C Zhou,YX Zhou,Q Zhang,QY Meng,LY Zhang,E Kobayashi,GH Wu","Near-zero thermal expansion of ZrW2O8/Al?Si composites with three dimensional interpenetrating network structure",,"Composites Part B",,"Vol. 211",,"p. 108678",2021,Feb.
"DH Kim,JH Kim,S Wenner,E Thronsen,CD Marioara,R Holmestad,E Kobayashi","Precipitation behavior of Al-Si-Cu-Mg(-Fe) Alloys by a deformation-semisolid extrusion process",,"Materials Characterization",,"Vol. 173",,"p. 110863",2021,Feb.
"K Narita,S Hiromoto,E Kobayashi,T Sato","Effects of incorporating β-tricalcium phosphate with reaction sintering into Mg-based composites on degradation and mechanical integrity",,"Metals",,"Vol. 11",,"p. 227",2021,Jan.
"XL Chen,CD Marioara,SJ Andersen,J Friis,A Lervik,R Holmestad,E Kobayashi","Data on atomic structures of precipitates in an Al-Mg-Cu alloy studied by high reso-lution transmission electron microscopy and first-principles calculations",,"Data in Brief",,"Vol. 34",,"p. 106748",2021,Jan.
"Sari Yanagida,Takashi Nagoshi,Akiyoshi Araki,Tso-Fu Mark Chang,Chun-Yi Chen,Equo Kobayashi,Akira Umise,Hideki Hosoda,Tatsuo Sato,Masato Sone","Heterogeneous Deformation Behavior of Cu-Ni-Si Alloy by Micro-Size Compression Testing",,"Crystals","MDPI","Vol. 10","No. 12","p. 1162",2020,Dec.
"Xuanliang Chen,CD Marioara,SJ Andersen,J Friis,A Lervik,R Holmestad,E Kobayashi","Precipitation processes and structural evolutions of various GPB zones and two types of S phases in a high purity cold-worked Al-Cu-Mg alloy with low Cu/Mg ratio",,"Materials & Design",,"Vol. 199",,"p. 109425,",2020,Dec.
"I Nakahata,Y Tsutsumi,E Kobayashi","Mechanical properties and corrosion resistance of magnesium?hydroxyapatite com-posites fabricated by spark plasma sintering",,"Metals",,"Vol. 10",,"p. 1314",2020,Oct.
"Minho O,Haruka Fujita,Equo Kobayashi,Masanori Kajihara","Kinetics of the reactive diffusion between solid Cu and liquid Sn-Bi alloys","日本金属学会2020年秋季(第167回)講演大会",,,,,,2020,Sept.
"Wataru Mizoh,Equo Kobayashi","溝ロール圧延した鉛レス黄銅の引張特性と横断面の硬さ分布",,,,,,,2020,Aug.
"DH Kim,JH Kim,E Kobayashi","Microstructure characterization of rolled Al-Si-Mg-Fe alloy by three-dimensional tomography",,"Materials Science & Engineering A",,"Vol. A 768",,"p. 1384449",2019,Dec.
"NQ Cao,HM Le,KM Pham,NV Nguyen,S Hiromoto,E Kobayashi","In vitro corrosion and cell response of hydroxyapatite coated Mg matrix in situ com-posites for biodegradable material applications",,"Maerials",,"Vol. 12",,"p. 3474",2019,Oct.
"Michika Takahashi,Kazuki Seki,Equo Kobayashi","Zr を添加したCu-3 %Ag 合金の特性評価およびTEM 観察",,"銅と銅合金",,"Vol. 58",,,2019,Aug.
"K Narita,QM Tian,I Johnson,CX Zhang,E Kobayashi,HN Liu","Degradation behaviors and cytocompatibility of Mg/β-tricalcium phosphate compo-sites produced by spark plasma sintering",,"ournal of Biomedical Materials Research: Part B - Applied Biomaterials",,"Vol. 107","No. 7","pp. 2238-2253",2019,July
"Taro Ichii,Equo Kobayashi,Kensuke Yamamoto,Masashi Takahashi,Yoshinori Kamikubo,Yasuo Sugiura,Shigeru Iwasawa","半溶融成形したAl-Si-Mg合金の半溶融状態での保持時間が初晶α相中の溶質濃度および時効硬化挙動に与える影響","公益社団法人日本鋳造工学会 第172回全国講演大会","鋳造工学 全国講演大会講演概要集",,"Vol. 172",,"p. 23",2018,Oct.
"Kazuki Seki,Equo Kobayashi","Cu5Zr系金属間化合物の結晶構造と相安定性に及ぼすAg添加の影響",,"銅と銅合金",,"Vol. 57",,"pp. 269-274",2018,Aug.
"Michika Takahashi,Kazuki Seki,Equo Kobayashi","Cu-Ag合金の時効挙動に及ぼすZr添加の影響",,"銅と銅合金",,"Vol. 57",,"pp. 42-47",2018,Aug.
"Quang Nguyen Cao,Ngoc Dinh Pham,Van Hai Dinh,Sachiko Hiromoto,Equo Kobayashi","Corrosion of Hydroxyapatite Coated Mg Matrix In Situ Composites","THERMEC 2018",,,,,,2018,July
"有賀康博,小塚雅也,Seong Nyeong Kim,Equo Kobayashi,Tatsuo Sato","Mg/Si比と自然時効時間が異なるAl?Mg?Si合金のクラスタ形成と二段時効挙動の関係",,"軽金属",,"Vol. 68",,"pp. 133-140",2018,Mar.
"Y Aruga,Seong Nyeong Kim,M Kozuka,Equo Kobayashi,Tatsuo Sato","Effects of cluster characteristics on two-step aging behavior in Al-Mg-Si alloys with different Mg/Si ratios and natural aging periods",,"Materials Science and EngineeringA",,"Vol. 718",,"pp. 371-376",2018,Mar.
"Hiroki NAKAYASU,Equo Kobayashi,Tatsuo Sato,Randi Holmestad,Marthinsen Knut","任意 Orientation relationships of phase transformation in α-Al12Mn3Si pseudomorphs after plate-like Al6Mn precipitate in an AA3004 Al-Mn based alloy",,,,,,,2018,Jan.
"Nguyen Cao,Dinh Ngoc Pham,Kai Narita,Equo Kobayashi,Hai V. Dinh,Sachiko Hiromoto","In Vitro Corrosion Properties of Mg Matrix In Situ Composites Fabricated by Spark Plasma Sintering",,"Metals","MDPI","Vol. 7","No. 9",,2017,Sept.
"Hiroki NAKAYASU,Equo Kobayashi,Tatsuo Sato","Quantification of recrystallization behavior and dispersoids with Rietveld refinement in 3004 aluminum alloy with various homogenization conditions",,,,,,,2017,Sept.
"S. Matsushita,A. Tsuruoka,E. Kobayashi,T. Isobe,A. Nakajima","Redox reaction by thermally excited charge carriers: towards sensitized thermal cells",,"Mater. Horiz.",,"Vol. 4",,"pp. 649-656",2017,Apr.
"Ayumi Tsuruoka,Ikuo Kobayashi,Toshihiro Isobe,Akira Nakajima,Sachiko Matsushita","Redox reaction of copper ions by thermally-exited electron carriers generated in β-FeSi2","84th Meeting of The Electrochemical Society of Japan",,,,,,2017,Mar.
"山本 健介,高橋 正詞,上久保 佳則,杉浦 泰夫,岩澤 秀,岡根 利光,Equo Kobayashi,里 達雄","半溶融成形したAl-Si-Mg合金の機械的性質に及ぼすCu添加量の影響",,"鋳造工学 全国講演大会講演概要集","公益社団法人 日本鋳造工学会","Vol. 170",,"pp. 42-42",2017,
"Kai Narita,Equo Kobayashi,Tatsuo Sato","Sintering Behavior and Mechanical Properties of Magnesium/β-Tricalcium Phosphate Composites Sintered by Spark Plasma Sintering",,"Materials Transactions",,"Vol. 57","No. 9","pp. 1620-1627",2016,Sept.
"Ayumi Tsuruoka,Iquo Kobayashi,Toshihiro Isobe,Akira Nakajima,Sachiko Matushita","Redox reaction of metal ions in synthesized thermoelectric cells","13th Annual Meeting of the Thermoelectrics Society of Japan",,,,,,2016,Sept.
"Sari Yanagida,Akiyoshi Araki,Tso-Fu Mark Chang,Chun-Yi Chen,Takashi Nagoshi,Equo Kobayashi,Hideki Hosoda,Tatsuo Sato,Masato Sone","Deformation Behaviors of Pure Cu and Cu-Ni-Si Alloy Evaluated by Micro-Tensile Testing",,"Materials Transactions",,"Vol. 57","No. 11","pp. 1897-1901",2016,Sept.
"T Ogura,K Horikawa,Y Kitani,M Mihara,SN Kim,E Kobayashi,T Sato,H Kobayashi","Effect of High-Speed Impact Compression on Natural Aging and Subsequent Artificial Aging of a 6061 Aluminum Alloy",,"Materials Transactions",,"Vol. 57","No. 8","pp. 1282-1286",2016,Aug.
"Cao Quang Nguyen,Kai Narita,Equo Kobayashi,Tatsuo Sato","Evolution of the microstructure and mechanical properties of Mg-matrix in situ composites during spark plasma sintering",,"Powder Metallurgy",,,,,2016,Aug.
"Kazuki Seki,Equo Kobayashi","The Effect of Zr Addition on Amount of Solid Solution and Mechanical Property of Cu-Ag-Zr Alloy",,"Jopurnal of Japan Institute of Copper",,"Vol. 55","No. 1","pp. 119-123",2016,Aug.
"Sari Yanagida,Akiyoshi Araki,Tso-Fu Mark Chang,Chun-Yi Chen,Takashi Nagoshi,Equo Kobayashi,Hideki Hosoda,Tatsuo Sato,Masato Sone","Precipitation Strengthening Behavior of Micro-Specimens Made of Cu-Ni-Si Alloy",,"The 9th Pacific Rim International Conference on Advanced Materials and Processing (PRICM9)",,,,,2016,Aug.
"Ayumi Tsuruoka,Ikuo Kobayashi,Mitsutoshi Ueda,Toshihiro Isobe,Akira Nakajima,Sachiko Matsushita","Construction of high-temperature battery using n-Si/β-FeSi2/CuZr(PO4)3","83th Meeting of The Electrochemical Society of Japan",,,,,,2016,Mar.
"Sari Yanagida,Akiyoshi Araki,Tso-Fu Mark Chang,Chun-Yi Chen,Takashi Nagoshi,Equo Kobayashi,Hideki Hosoda,Tatsuo Sato,Masato Sone","微小圧縮試験及び微小引張試験によるMEMS用Cu-Ni-Si合金の機械的特性評価","第63回応用物理学会春季学術講演会","第63回応用物理学会春季学術講演会",,,,,2016,Mar.
"Mami Mihara,Calin D. Marioara,Sigmund J. Andersen,Randi Holmestad,Equo Kobayashi,Tatsuo Sato","Precipitation in an Al-Mg-Cu alloy and the effect of a low amount of Ag",,"MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING",,"Vol. 658",,"pp. 91-98",2016,Mar.
"Cao Quang Nguyen,Equo Kobayashi,Tatsuo Sato","Effect of in situ reactions on the mechanical properties of biodegradable Mg-matrix composite","10th World Biomaterials Congress",,,,,,2016,Mar.
"JaeHwang Kim,Minoru Hayashi,Equo Kobayashi,Tatsuo Sato","Influence of Si Addition on Quenching Sensitivity and Formation of Nano-Precipitate in Al-Mg-Si Alloys",,"JOURNAL OF NANOSCIENCE AND NANOTECHNOLOGY",,"Vol. 16","No. 2","pp. 1814-1817",2016,Feb.
"Pham Ngoc Dinh,Dinh Van Hai,Cao Quang Nguyen,Equo Kobayashi","Microstructure and Mechanical Properties of Mg/Zn Composites Fabricated By Spark Plasma Sintering for Biomedical Implants","PFAM XXIV",,,,,,2015,Dec.
"JH Kim,E Kobayashi,T Sato","Influence of Natural Aging Time on Two-Step Aging Behavior of Al-Mg-Si(-Cu) Alloys",,"MATERIALS TRANSACTIONS",,"Vol. 56","No. 11","pp. 1771-1780",2015,Nov.
"Sari Yanagida,Akiyoshi Araki,Tso-Fu Mark Chang,Chun-Yi Chen,Nagoshi Takashi,Equo Kobayashi,Hideki Hosoda,Tatsuo Sato,Masato Sone","Mechanical Properties of Cu-Ni-Si alloy Evaluated by Micro-Tensile Test for Application in MEMS","SSDM2015, 2015 International Conference on Solid State Devises and Materials","SSDM2015, 2015 International Conference on Solid State Devises and Materials",,,,,2015,Sept.
"Yusuke Hisata,Equo Kobayashi,Tatsuo Sato","Influence of Nb Addition on Phase Constitution and Mechanical Properties of Biomedical Ti-Zr Based Alloys",,"Materials Transactions",,"Vol. 56","No. 9","pp. 1553-1557",2015,Sept.
"Sari Yanagida,Akiyoshi Araki,Tso-Fu Mark Chang,Chun-Yi Chen,Takashi Nagoshi,Equo Kobayashi,Hideki Hosoda,Tatsuo Sato,Masato Sone","The Precipitation Strengthening Behavior of Cu-Ni-Si Alloy used as Micro-Components Evaluated by Micro-Tensile Tests","MNE2015, 41th International Conference on Micro and Nano Engineering","MNE2015",,,,,2015,Sept.
"Akiyoshi Araki,Equo Kobayashi,Tatsuo Sato","出強化型Cu-Ni-Si-Zn合金の双晶変形挙動に及ぼす時効処理条件の影響,",,"銅と銅合金",,"Vol. 54","No. 541","pp. 136-140",2015,Aug.
"Sari Yanagida,Akiyoshi Araki,Tso-Fu Mark Chang,Equo Kobayashi,Tatsuo Sato,Masato Sone","Mechanical Property of Cu-Ni-Si Alloy Evaluated by a Micro-Compression Test","ICMAT2015 & IUMRS-ICA2015","ICMAT2015 & IUMRS-ICA2015",,,,,2015,June
"Cao Quang Nguyen,Equo Kobayashi,Tatsuo Sato","Microstructure and mechanical properties of Mg-matrix in situ composites sintered by Spark Plasma Sintering for biomaterial applications","The 128th Conference of Japan Institute of Light Metals",,,,,,2015,May
"Mami Mihara,Equo Kobayashi,Tatsuo Sato","Effects of the Pre-Aging Period on the Formation Behavior of Nanoclusters in an Al-Mg-Cu Alloy",,"MATERIALS TRANSACTIONS",,"Vol. 56","No. 4","pp. 500-506",2015,Apr.
"Kou Satake,Jeonggee Son,Equo Kobayashi,Masabumi Masuko,Susumu Sato,Hidenori Kosaka","ディーゼル燃料噴射装置のノズルシート部摩耗と変形に関する研究",,"自動車技術会論文集",,"Vol. 46","No. 2","pp. 331-336",2015,Mar.
"高木 康夫,増田 哲也,Equo Kobayashi,里 達雄","Al?Mg?Si合金の多段時効における時効硬化挙動に及ぼす自然時効の影響",,"軽金属","The Japan Institute of Light Metals","Vol. 65","No. 3","pp. 86-93",2015,
"長谷川 由佳,Equo Kobayashi,里 達雄,山本 健介,高橋 正詞,上久保 佳則,杉浦 泰夫","半溶融鋳造したAl-Si-Mg合金のミクロ組織と時効硬化挙動",,"鋳造工学 全国講演大会講演概要集","公益社団法人 日本鋳造工学会","Vol. 167",,"pp. 91-91",2015,
"Ayumi Tsuruoka,Equo Kobayashi,Mitsutoshi Ueda,Toshihiro Isobe,Akira Nakajima,Sachiko Matsushita","Preparation and thermoelectric characterization at β-FeSi2 /Si interface","12 th Meeting of thermoelectric society of Japan",,,,,,2015,
"Mihara, M.,Equo Kobayashi,Sato, T.","Effect of trace addition of ag on the precipitation behavior of Al-Mg-Cu alloy",,"Engineering Journal",,"Vol. 19","No. 3","pp. 75-84",2015,
"小椋 智,堀川 敬太郎,木谷 祐貴,三原 麻未,金 聖寧,Equo Kobayashi,里 達雄,小林 秀敏","6061アルミニウム合金の自然時効およびその後の人工時効に及ぼす高速衝撃圧縮の影響",,"軽金属","一般社団法人 軽金属学会","Vol. 65","No. 12","pp. 617-621",2015,
"Takuro Aoki,Mark Chang,Masato Sone,Equo Kobayashi,里達雄","加工-半溶融押出により作製した高濃度鉄含有のAl-Zn-Mg系合金の組織と機械的性質","軽金属学会 第127回秋季大会","軽金属学会 第127回秋季大会 予稿集",,,,,2014,Nov.
"Seong Nyeong Kim,JaeHwang Kim,Equo Kobayashi,Tatsuo Sato","Influence of Mg/Si Ratio on Nanocluster Formation in Al-Mg-Si Alloys with Constant Mg plus Si Concentration",,"MATERIALS TRANSACTIONS",,"Vol. 55","No. 11","pp. 1647-165",2014,Nov.
"Kou Satake,Jeonggee Son,Equo Kobayashi,Masabumi Masuko,Susumu Sato,Hidenori Kosaka","ディーゼル燃料噴射装置のノズルシート部摩耗と変形に関する研究","自動車技術会2014年秋季学術講演会","講演前刷集",,,"No. 124-14","pp. 21-26",2014,Oct.
"Yorina S. F. Lantang,Equo Kobayashi,Hiroyasu Tezuka,a Tatsuo Sato","Effects of Macro- and Micro-Porosity on Mechanical Properties of a Porous Ti-6Al-4V Alloy Fabricated Using Solid-State Space-Holder Method",,"MATERIALS TRANSACTIONS",,"Vol. 55","No. 9","pp. 1428-1433",2014,Sept.
"Yasuo Takaki,Tetsuo Masuda,Equo Kobayashi,Tatsuo Sato","Effects of Natural Aging on Bake Hardening Behavior of Al-Mg-Si Alloys with Multi-Step Aging Proces",,"Yasuo Takaki, Tetsuo Masuda, Equo Kobayashi, Tatsuo Sato",,"Vol. 55","No. 8","pp. 1257-1265",2014,Aug.
"Takuro Aoki,Equo Kobayashi,Masato Sone,Tatsuo Sato","Microstructure and Mechanical Properties of D-SSF Processed Al-Zn-Mg Alloys with High Fe Content",,"Materials Science Forum","Trans Tech Publications","Vol. 794-796",,"pp. 1109-1114",2014,June
"Mami Mihara,Equo Kobayashi,Tatsuo Sato","Nanocluster Formation and Two-step Aging Behavior of Rapid Hardening Al-Mg-Cu(-Ag) Alloys",,"Materials Science Forum",,"Vol. 794-796",,"pp. 996-1001",2014,June
"Yongchul Lee,Equo Kobayashi,Tatsuo Sato","Effects of Precipitates and Mn Solute Atoms on the Recrystallization Behavior of an Al-Mn Alloy",,"Korean Journal of Materials Research",,"Vol. 24","No. 5","pp. 229-235",2014,May
"Shanghai Wei,Tianping Zhu,Haibo Hou,Equo Kobayashi,Tatsu Sato","Effects of Pb/Sn additions on the age-hardening behaviour of Mg-4Zn alloys",,"MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING",,"Vol. 597",,"pp. 52-61",2014,Apr.
"JaeHwang Kim,Seong Nyeong Kim,Equo Kobayashi,Tatsuo Sato","Thermal Stability and Transition Behavior of Nanoclusters during Two-Step Aging at 250℃ in Al-Mg-Si(-Cu) Alloys",,"Materials Transactions",,"Vol. 55","No. 5","pp. 768-773",2014,Apr.
"Akiyoshi Araki,Warren J. Poole,Equo Kobayashi,Tatsuo Sato","Twinning Induced Plasticity and Work Hardening Behavior of Aged Cu-Ni-Si Alloy",,"Materials Transactions",,"Vol. 55","No. 3","pp. 501-505",2014,Feb.
"Kim, S.N.,Equo Kobayashi,Sato, T.","Formation behavior of nanoclusters in Al-Mg-Si alloys with different Mg and Si composition",,"Materials Science Forum",,"Vol. 794-796",,"pp. 957-962",2014,
"Hiroaki Nagai,Mark Chang,Masato Sone,Equo Kobayashi,里達雄","半溶融鋳造したAl-７％Si-0.6％Mg合金段付き鋳物材のミクロ組織と機械的性質","軽金属学会 第１２５秋季大会","軽金属学会",,,,,2013,Nov.
"Takuro Aoki,Mark Chang,Masato Sone,Equo Kobayashi,里達雄","高濃度鉄を含むAl-Zn-Mg合金の加工?半溶融成型組織および機械的性質","軽金属学会 第125回秋期大会","軽金属学会",,,,,2013,Nov.
"Mami Mihara,Equo Kobayashi,Tatsuo Sato","Rapid Age-Hardening Behavior of Al-Mg-Cu (-Ag) Alloys and Incubation Stage in the Low-Temperature Aging",,"Materials Transactions",,"Vol. 54","No. 10","pp. 1898-1904",2013,Oct.
"Yong-Chul Lee,Hiroyasu Tezuka,Equo Kobayashi,Tatsuo Sato","Effects of Annealing Temperature on the Recrystallization Behavior and microstructure of Al-Mn Alloys with Different Second Particles","The 8th pacific Rim International Congress on Advanced Materials and Processing",,,,,,2013,Aug.
"Zhijun Zhang,Hiroyasu Tezuka,Equo Kobayashi,Tatsuo Sato","Effects of the Mn/Fe Ratio and Cooling Rate on the Modification of Fe",,"Materials Transactions",,"Vol. 54","No. 8","pp. 1484-1490",2013,Aug.
"Ryo Furuta,TATSUO SATO,Equo Kobayashi,HIROYASU TEZUKA","Cu-Ti合金の時効硬化に及ぼすB添加の影響",,"銅と銅合金",,"Vol. 52","No. 1","pp. 23-29",2013,Aug.
"Akiyoshi Araki,Equo Kobayashi,TATSUO SATO,廣瀬清慈,江口立彦","Cu-Ni-Si合金の時効析出組織および引張変形挙動",,"銅と銅合金",,"Vol. 52","No. 1","pp. 14-18",2013,Aug.
"C Phongphisutthinan,Hiroyasu Tezuka,Equo Kobayashi,Tatsuo Sato","Effects of β-Mg2Si Precipitates on Semi-Solid Microstructures of Wrought Al-Mg-Si Based Alloys Produced by Deformation-Semi-Solid-Forming Process",,"Materials Transactions",,"Vol. 54","No. 4","pp. 609-617",2013,Apr.
"SeongNyeong Kim,JaeHwang Kim,Hiroyasu Tezuka,Equo Kobayashi,Tatsuo Sato","Formation Behavior of Nanoclusters in Al-Mg-Si Alloys with Different Mg and Si Concentration",,"Materials Transactions",,"Vol. 54","No. 3","pp. 297-303",2013,Mar.
"Yusuke Tsutsumi,Equo Kobayashi,Masakimi Ogo,Takao Hanawa","Accelerated Calcium Phosphate Formation on Titanium Utilizing Galvanic Current between Titanium and Gold in Hanks' Solution",,"MATERIALS TRANSACTIONS",,"Vol. 54","No. 2","pp. 149-155",2013,Feb.
"T Hasebe,E Kobayash,H Tezuka,T Sato","Effects of sintering conditions on mechanical properties of biomedical porous Ti fabricated by Spark Plasma Sintering",,"Japanese Journal of Applied Physics",,"Vol. 52","No. 1",,2013,Jan.
"JaeHwang Kim,Calin Daniel Marioara,Randi Holmestad,Equo Kobayashi,Tatsuo Sato","Effects of Cu and Ag additions on age-hardening behavior during multi-step aging in Al Mg Si alloys",,"Materials Science and Engineering: A",,"Vol. 560",,"pp. 154-162",2013,Jan.
"石川 裕太,張 志軍,手塚 裕康,Equo Kobayashi,里 達雄","高濃度Feを含むAC4CH合金の熱間圧縮‐半溶融鋳造組織と機械的性質",,"鋳造工学 全国講演大会講演概要集","公益社団法人 日本鋳造工学会","Vol. 162",,"pp. 65-65",2013,
"Tatsuo Sato,Hiroyasu Tezuka,Equo Kobayashi","evelopment of Nano-hetero Structure Aluminum Alloys by Practical Use of Iron and Their Properties",,"鉄と鋼",,"Vol. 98","No. 12","pp. 836-841",2012,Dec.
"Akiyoshi Araki,Yuya Ishizuka,Equo Kobayashi,TATSUO SATO,廣?清慈,江口立彦","Cu-Ni-Si合金における時効析出挙動と加工硬化率の変化",,"銅と銅合金",,"Vol. 51","No. 1","pp. 143-147",2012,Aug.
"Yuya Ishizuka,Akiyoshi Araki,Equo Kobayashi,TATSUO SATO,廣?清慈,江口立彦","Cu-Ni-Si合金の時効析出挙動に及ぼすCrおよびFe添加の影響, 銅と銅合金",,"銅と銅合金",,"Vol. 51","No. 1","pp. 108-115",2012,Aug.
"YeLim Kim,Hiroyasu Tezuka,Equo Kobayashi,Tatsuo Sato","Effect of Ca Addition on Precipitation Behavior of Mg-6.0mass%Zn-3.0mass%Al Alloy",,"Materials Transactions A",,"Vol. 53","No. 8","pp. 1371-1378",2012,Aug.
"J Kim,Hiroyasu Tezuka,Equo Kobayashi,Tatsuo Sato","Effects of Cu and Ag Addition on Nanocluster Formation Behavior in Al-Mg-Si Alloys",,"Korean Journal of Materials Research",,"Vol. 22","No. 7","pp. 329-334",2012,July
"Yasuo Takaki,Tetsuya Masuda,Equo Kobayashi,Tatsuo Sato","Effects of Pre-Aging Condition on Multi-Step Aging Behavior in Al-Mg-Si Alloys","13th International Conference on Aluminium Alloys",,,,,,2012,June
"J Kim,CD Marioara,R Holmestad,Equo Kobayashi,Tatsuo Sato","Effects of Microalloying Elements (Cu, Ag) on Nanocluster Formation and Age-hardening Behavior in Al-Mg-Si","13th International Conference on Aluminium Alloys",,,,,,2012,June
"Z Zhang,Equo Kobayashi,Hiroyasu Tezuka,Tatsuo Sato","Influence of the Fe Content, Mn/Fe Ratio and Cooling Rate on the Modification Process of Fe Intermetallic Compounds in Hypoeutectic Al-Si Alloys","13th International Conference on Aluminium Alloys",,,,,,2012,June
"Ye-Lim Kim,Hiroyasu Tezuka,Equo Kobayashi,Tatsuo Sato","Effect of Al addition on the precipitation behavior of a binary Mg-Zn alloy",,"Korean J. Mater. Research",,"Vol. 3",,,2012,Mar.
"Hyun Bom Lee,HIROYASU TEZUKA,Equo Kobayashi,TATSUO SATO,Kee Do Woo","Fabrication and Mechanical Properties of Al-Based In Situ Nano-Composites Reinforced by Al2O3 and Intermetallic Compounds",,"Materials Transactions",,"Vol. 53","No. 2","pp. 428-434",2012,Feb.
"Tatsuo Sato,HIROYASU TEZUKA,Equo Kobayashi","鉄を活用したナノヘテロ構造アルミニウム合金の創製と材料特性",,"ふぇらむ : 日本鉄鋼協会会報",,"Vol. 17",,"pp. 836-841",2012,Jan.
"張 志軍,Equo Kobayashi,手塚 裕康,里 達雄","Effect of the Mn/Fe Ratio and Cooling Rate on Morphology of Fe Intermetallic Compounds in A356 Alloy with 2.5% Fe",,"鋳造工学 全国講演大会講演概要集","公益社団法人 日本鋳造工学会","Vol. 160",,"pp. 96-96",2012,
"里 達雄,Ye-Lim Kim,手塚 裕康,Equo Kobayashi,Si Young Chang","Mg-Zn-Al 系合金の凝固組織および析出組織に及ぼす添加元素の影響",,"鋳造工学 全国講演大会講演概要集","公益社団法人 日本鋳造工学会","Vol. 160",,"pp. 66-66",2012,
"千々岩 大志,手塚 裕康,Equo Kobayashi,里 達雄","Al-Mg2Si 擬二元系合金の組織と機械的性質に及ぼす熱処理の影響",,"鋳造工学 全国講演大会講演概要集","公益社団法人 日本鋳造工学会","Vol. 161",,"pp. 53-53",2012,
"J Kim,Hiroyasu Tezuka,Equo Kobayashi,Tatsuo Sato","Effects of Cu and Ag Addition on Nanocluster Formation and Age-hardening Behavior in Al-Mg-Si Alloys","European Conference of Aluminum Alloy",,,,,,2011,Oct.
"?久 茜,Akiyoshi Araki,Yuya Ishizuka,Equo Kobayashi,TATSUO SATO,廣?清慈,江口立彦","Cu-Ni-Si合金の時効に伴うかたさおよび電気比抵抗の段階的変化",,"銅と銅合金",,"Vol. 50","No. 1",,2011,Aug.
"Yuya Ishizuka,?久 茜,Equo Kobayashi,TATSUO SATO,廣?清慈,江口立彦","Cu-Ni-Si合金の時効に伴うかたさおよび電気比抵抗の段階的変化に及ぼす微量添加元素の影響",,"銅と銅合金",,"Vol. 50","No. 1","pp. 44-51",2011,Aug.
"JaeHwang Kim,Equo Kobayashi,Tatsuo Sato","Effects of Cu Addition on Behavior of Nanoclusters during Multi-Step Aging in Al-Mg-Si Alloys",,"Materials Transations",,"Vol. 52","No. 5","pp. 906-913",2011,May
"千々岩 大志,手塚 裕康,Equo Kobayashi,里 達雄","Al-Mg2Si 擬二元系合金の機械的性質に及ぼすMg2Siの形状変化の影響",,"鋳造工学 全国講演大会講演概要集","公益社団法人 日本鋳造工学会","Vol. 159",,"pp. 46-46",2011,
"HIROYASU TEZUKA,手塚 裕康,Equo Kobayashi,里 達雄,織田 和宏,塩田 正彦,鹿毛 秀彦","超音波パルス法によろ高剛性アルミニウム合金ダイカストのヤング率評価","The 157th JFS Meeting","Reports of the 157th JFS Meeting",,,,"p. 131",2010,Oct.
"H.B. Lee,Hiroyasu Tezuka,Equo Kobayashi,Tatsuo Sato,K.D. Woo","Fabrication of (Al2O3-IMC)p/Al Composite Materials by In-situ Reaction Using MA Processed Al/MO Powders","Proc. of the 12th International Conference on Aluminium Alloys","Proceedings of the 12th International Conference on Aluminum Alloys",,,,"pp. 829-834",2010,Sept.
"J.H. Kim,Equo Kobayashi,Tatsuo Sato","Effects of Cu Addition on Behavior of Nanoclusters during Multi-step Aging in Al-Mg-Si Alloys","Proc. of the 12th International Conference on Aluminium Alloys",,,,,"pp. 1051-1056",2010,Sept.
"N Nomura,Kozue Sakamoto,Katsuya Takahashi,Seiji Kato,Yasunori Abe,Hisashi Doi,Yusuke Tsutsumi,Masahiro Kobayashi,Equo Kobayashi,Woo-Jong Kim,Kyo-Han Kim,Takao Hanawa","Fabrication and mechanical properties of porous Ti/HA composites for bone fixation devices",,"Materials Transactions",,"Vol. 51","No. 8","pp. 1449-1454",2010,Aug.
"Equo Kobayashi","生体材料と工業材料",,"表面技術",,"Vol. 61","No. 1","pp. 47-49",2010,Jan.
"?久 茜,Equo Kobayashi,TATSUO SATO,廣瀬清慈,江口立彦","Si濃度の異なるCu-Ni-Si合金の時効硬化挙動および析出量の解析",,"銅と銅合金",,"Vol. 49","No. 1","pp. 29-34",2010,Jan.
"Miura-Fujiwara, E.,Teramoto, T.,Sato, H.,Equo Kobayashi,Watanabe, Y.","Fabrication of Ti-based biodegradable material composites prepared by spark plasma sintering method",,"Materials Science Forum",,"Vol. 654-656",,"pp. 2158-2161",2010,
"Equo Kobayashi","形状記憶合金医療機器の力学的試験",,"新材料・新素材シリーズ 医療材料・医療機器?その安全性と生体適合性への取り組み?","シーエムシー出版",,,"pp. 99-107",2009,July
"N Eliaz,W Kopelovitch,L Burstein,Equo Kobayashi,Takao Hanawa","Electrochemical processes of nucleation and growth of calcium phosphate on titanium supported by real-time quartz crystal microbalance measurements and X-ray photoelectron spectroscopy analysis",,"Journal of Biomedical Materials Research A",,"Vol. 89A","No. 1","pp. 270-280",2009,Jan.
"Equo Kobayashi,Y Watanabe,T Kikuchi,Tatsuo Sato","Development of new composite materials for orthopaedic internal fixation consisting of porous titanium alloys and biodegradable calcium phosphates",,"Processing and Fabrication of Advanced Materials XVIII",,,,"pp. 1215-1220",2009,
"V Srimaneepong,T Yoneyama,Equo Kobayashi,H Doi,T Hanawa","Comparative study on torsional strength, ductility and fracture characteristics of laser-welded alpha plus beta Ti-6Al-7Nb alloy, CP Titanium and Co-Cr alloy dental castings",,"DENTAL MATERIALS",,"Volume 24","Number 6","pp. 839-845",2008,June
"Equo Kobayashi","Mechanical Properties and Blood Compatibility of Biomedical Au-Pd Alloys for Stents","The Sixth Pacific Rim International Conference on Advanced Materials and Processing (PRICM 6)",,,,,,2007,Nov.
"Harumi Sakamoto,H Doi,Equo Kobayashi,T Yoneyama,Y Suzuki,Takao Hanawa","Structure and strength at the bonding interface of a titanium-segmented polyurethane composite through 3-(trimethoxysilyl) propyl methacrylate for artificial organs",,"OURNAL OF BIOMEDICAL MATERIALS RESEARCH PART A",,"Volume 82A","Number 1","pp. 52-61",2007,July
"Equo Kobayashi","Elucidation of phosphate precipitation mechanism on Ti and Zr by cathodic polarization in Hanks’ solution","The 6th International Symposium on Titanium in Dentistry",,,,,,2007,June
"Equo Kobayashi","Bone differentiation property of osteoblast-like cells on titanium and gold","The 6th International Symposium on Titanium in Dentistry",,,,,,2007,June
"Equo Kobayashi","Acceralation of calcium phosphate precipitation by galvanic current between titanium and gold in simulated body fluid","The 6th International Symposium on Titanium in Dentistry",,,,,,2007,June
"Equo Kobayashi","Immobilization of poly(ethylen grycol) to titanium surface","The 11th World Conference on Titanium",,,,,,2007,June
"Y Tanaka,Equo Kobayashi,S Hiromoto,K Asami,H Imai,Takao Hanawa","Calcium phosphate formation on titanium by low-voltage electrolytic treatments",,"JOURNAL OF MATERIALS SCIENCE-MATERIALS IN MEDICINE",,"Volume 18","Number 5","pp. 797-806",2007,May
"五十嵐 良明,豊田 和弘,Equo Kobayashi,土居 寿,米山 隆之,浜中 人士,土屋 利江","Improved Biocompatibility of Titanium-Zirconium (Ti-Zr) Alloy: Tissue Reaction and Sensitization to Ti-Zr Alloy Compared with Pure Ti and Zr in Rat Implantation Study",,"J.Japan Inst.Metals",,"Vol. 48","No. 4","pp. 395-401",2007,Apr.
"Y Tanaka,H Doi,Equo Kobayashi,T Yoneyama,Takao Hanawa","Determination of the immobilization manner of amine-terminated poly(ethylene glycol) electrodeposited on a titanium surface with XPS and GD-OES",,"MATERIALS TRANSACTIONS",,"Volume 48","Number 3","pp. 287-292",2007,Mar.
"T Yoneyama,H Doi,H Matsumura,H Sakamoto,Y Tanaka,T Komiya,Y Tsutsumi,Equo Kobayashi,Takao Hanawa","Bending property of super-elastic Ti-Ni alloy dental castings with different heat treatments",,"MATERIALS TRANSACTIONS",,"Volume 48","Number 3","pp. 428-431",2007,Mar.
"Equo Kobayashi,Miyuki Ando,Y Tsutsumi,H Doi,T Yoneyama,M Kobayashi,Takao Hanawa","Inhibition effect of zirconium coating on calcium phosphate precipitation of titanium to avoid assimilation with bone",,"MATERIALS TRANSACTIONS",,"Volume 48","Number 3","pp. 301-306",2007,Mar.
"Equo Kobayashi","Calcium phosphate precipitation by Galvanic current between titanium and gold in pseudo-body fluid",,"Materials Science Forum",,"Vol. 539-543",,"pp. 653-656",2007,Jan.
"Equo Kobayashi","Acceleration and inhibition of bone formation on implant materials by surface modification (Invited Lecture)","The 2nd Korea-Japan Joint Workshop on Biomedical Materials",,,,,,2006,Oct.
"H Doi,T Yoneyama,Equo Kobayashi,T Hanawa","Fatigue property of Ti-5Al-13Ta alloy dental castings in 0.9% NaCl solution",,"MATERIALS TRANSACTIONS",,"Volume 47","Number 9","pp. 2444-2447",2006,Sept.
"Equo Kobayashi","Calcium phosphate precipitation by galvanic current between titanium and gold pseudo-body fluid","International Conference on Processing and Manufacturing of Advanced Materials (THERMEC '2006)",,,,,,2006,July
"Equo Kobayashi","A new Technique of titanium and segmented polyurethane complex through 3-(trimethoxysilyl) propylmethacrylate for artificial implants","International Conference on Processing and Manufacturing of Advanced Materials (THERMEC '2006)",,,,,,2006,July
"E Kobayashi,H Mochizuki,H Doi,T Yoneyama,T Hanawa","Fatigue life prediction of biomedical titanium alloys under tensile/torsional stress",,"MATERIALS TRANSACTIONS",,"Volume 47","Number 7","pp. 1826-1831",2006,July
"Equo Kobayashi","Alloy design of new biomedical alloys (Invited Lecture)","JSPS AA Science Platform Program Seminar",,,,,,2006,Mar.
"Equo Kobayashi","Fatigue strength of biomedical titanium alloys under combined stress(Invited Lecture)","The 12th Israel Materials Engineering Conference (IMEC 2006)",,,,,,2006,Mar.
"Y Ikarashi,K Toyoda,Equo Kobayashi,H Doi,T Yoneyama,H Hamanaka,T Tsuchiya","Improved biocompatibility of titanium-zirconium (Ti-Zr) alloy: Tissue reaction and sensitization to Ti-Zr alloy compared with pure Ti and Zr in rat implantation study",,"Materials Transactions",,"Vol. 46","No. 10","pp. 2260-2267",2005,Oct.
"T Yoneyama,O Takahashi,Equo Kobayashi,T Hanawa,H Doi","Bending Properties of Co-Ni-Cr-Mo Alloy Wire for Orthodontic Application",,"Materials Transactions",,"Vol. 46","No. 7","pp. 1551-1554",2005,July
"V Srimaneepong,T Yoneyama,Equo Kobayashi,H Doi,H hanawa","Fracture characteristics of laser-welded cast α+β Ti-6Al-7Nb alloys under uniaxial stress: Part 1 tensile stress",,"Dental Materials Journal",,"Vol. 24","No. 4","pp. 541-549",2005,July
"J Kasuga,T Yoneyama,Equo Kobayashi,H Hanawa,H Doi","Fatigue Property of Super-Elastic Ti-Ni Alloy Dental Castings",,"Materials Transactions",,"Vol. 46","No. 7","pp. 1555-1563",2005,July
"Equo Kobayashi,土居 寿,米山隆之,Takao Hanawa","咀嚼運動をシミュレートした摩耗特性評価法の開発",,"生体材料工学研究所年報",,"Vol. 38",,"pp. 15-17",2004,Dec.
"V Srimaneepong,T Yoneyama,N Wakabayashi,Equo Kobayashi,H Doi","Deformation properties of Ti-6Al-7Nb alloy castings for removable partial denture frameworks",,"Dental Materials Journal",,"Vol. 23","No. 4","pp. 497-503",2004,Apr.
"Equo Kobayashi,土居 寿,松村英雄,米山隆之","歯科用Ti-6Al-7Nb合金の開発と臨床応用",,"生体材料工学研究所報告",,"Vol. 37",,"pp. 40-48",2003,Dec.
"Equo Kobayashi","形状記憶合金医療機器の力学的試験",,"医療材料・医療機器の安全性と生体適合性","シーエムシー出版",,,,2003,Nov.
"Equo Kobayashi","生体材料",,"化学便覧 応用化学編","丸善",,,,2003,Aug.
"Equo Kobayashi","生体用チタン合金の開発と評価",,"バイオマテリアル?生体材料?",,"Vol. 21","No. 1","pp. 30-36",2003,Jan.
"Y Ikarashi,T Tsuchiya,T Uchima,K Toyoda,Equo Kobayashi,H Doi,T Yoneyama,H Hamanaka","Tissue Reactions and Sensitivity to Iron-Chromium Alloys",,"Materials Transactions",,"Vol. 43","No. 12","pp. 3058-3064",2002,Dec.
"T Tsuchiya,Y Ikarashi,Equo Kobayashi,T Yoneyama,H Hamanaka","A method to monitor corrosion of chromium-iron alloys by monitoring the chromium ion concentration in urine",,"Materials Transactions",,"Vol. 43","No. 12","pp. 3058-3064",2002,Nov.
"T Yoneyama,H Doi,Equo Kobayashi,H Hamanaka","Effect of heat treatment with mold on the super-elastic property of Ti-Ni alloy castings for dental application",,"Journal of Materials Science: Materials in Medicine",,"Vol. 13","No. 10","pp. 947-951",2002,Oct.
"Equo Kobayashi","生体材料としてのCPチタンおよびチタン合金",,"まてりあ",,"Vol. 41","No. 8","pp. 553-560",2002,Aug.
"Equo Kobayashi","生体用チタン合金と生体適合性",,"軽金属",,"Vol. 52","No. 7","pp. 330-334",2002,July
"Equo Kobayashi","生体適合性材料",,"マテリアルステージ",,"Vol. 1","No. 10","pp. 1-4",2002,Jan.
"E Kobayashi,H Mochizuki,H Doi,T Yoneyama,M Otsuka,H Hamanaka","Mechanical and fatigue properties of biomedical titanium alloys under combined (ten-sile/torsional) stress",,"Reports of the Institute of Biomaterials and Bioengineering, Tokyo Medical and Dental University",,"Vol. 35",,"pp. 22-28",2001,Dec.
"H Mochizuki,E Kobayashi,H Doi,T Yoneyama,M Otsuka,H Hamanaka","Fatigue properties under combined stresses of biomedical titanium alloys",,"Proceedings of 4th Pacific Rim International Conference on Advanced Materials and Processing",,,,"pp. 197-200",2001,Nov.
"E Kobayashi,H Mochizuki,H Doi,T Yoneyama,M Otsuka,H Hamanaka","Mechanical properties of Ti-6Al-7Nb and Ti-5Al-13Ta alloys under combined (ten-sile/torsional) stress",,"Structural Biomaterials for the 21st Century",,,,"pp. 115-119",2001,Aug.
"E Kobayashi,H Mochizuki,H Doi,T Yoneyama,M Otsuka,H Hamanaka","Tensile/torsional fatigue of biomedical titanium alloys",,"Structural Biomaterials for the 21st Century",,,,"pp. 121-126",2001,Aug.
"土居 寿,Equo Kobayashi,米山 隆之,浜中 人士","銅を添加したTi-Ni合金鋳造体の引張特性と変態温度",,"歯科材料・器械",,"Vol. 20","No. 1","pp. 48-53",2001,Jan.
"土居 寿,Equo Kobayashi,米山隆之,浜中人士","精密鋳造したチタン及びチタン合金の力学的性質と耐蝕性",,"生体材料工学研究所報告",,"Vol. 34",,"pp. 28-40",2000,Dec.
"Equo Kobayashi","医療用金属材料",,"生体材料",,"Vol. 18","No. 6","pp. 268-270",2000,Dec.
"米山隆之,土居 寿,Equo Kobayashi,浜中人士","ビデオ式非接触型伸び計による歯科用合金の変形挙動",,"口腔病学会雑誌",,"Vol. 67","No. 4","p. 345",2000,Nov.
"?橋 正史,Equo Kobayashi,土居 寿,米山 隆之,浜中 人士","ニオブを添加した生体用β型チタン?ジルコニウム基合金の相安定性と力学的性質",,"日本金属学会誌",,"Vol. 64","No. 11","pp. 1120-1126",2000,Oct.
"米山隆之,Equo Kobayashi","生体用チタン合金の現状",,"非破壊検査",,"Vol. 49","No. 7","pp. 420-424",2000,July
"T Yoneyama,H Doi,Equo Kobayashi,H Hamanaka,Y Tanabe,W Bonfield","Stress transmission through Ti-Ni alloy, titanium and stainless steel in impact compression test",,"Journal of Materials Science: Materials in Medicine",,"Vol. 11","No. 6","pp. 333-336",2000,June
"T yoneyama,H Doi,Equo Kobayashi,H Hamanaka","Super-elastic property of Ti-Ni alloy for use in dentistry",,"Frontiers of Medical and Biological Engineering",,"Vol. 10","No. 2","pp. 97-103",2000,June
"曽我 祐一,土居 寿,望月 裕人,Equo Kobayashi,米山 隆之,浜中 人士","非接触伸び計による歯科用合金の応力?ひずみ線図の再評価",,"歯科材料・器械",,"Vol. 19","No. 2","pp. 145-153",2000,Mar.
"T Yoneyama,H Doi,E Kobayashi,S Tudsri,S Sessirisombat,H Yoshimasu,H Hamanaka","SEM observation on the surface of titanium miniplates retrieved from patients after maxillofacial surgical treatment",,"Reports of the Institute of Biomaterials and Bioengineering, Tokyo Medical and Dental University",,"Vol. 33",,"pp. 69-74",1999,Dec.
"Equo Kobayashi","生体用チタン合金の開発と応用",,"生体材料",,"Vol. 17","No. 6","pp. 264-271",1999,Dec.
"Equo Kobayashi,望月 裕人,土居 寿,中野 毅,米山 隆之,浜中 人士","歯科用チタン合金の変形挙動に基づく非接触型伸び計の検討",,"歯科材料・器械",,"Vol. 18","No. 5","pp. 359-367",1999,Nov.
"米山 隆之,大坪 邦彦,Equo Kobayashi,浜中 人士","矯正用チタンニッケル合金角型ワイヤーのトルク特性における超弾性と相変態挙動",,"歯科材料・器械",,"Vol. 18","No. 6","pp. 463-471",1999,Nov.
"Equo Kobayashi","抗菌材料",,"金属材料活用事典","産業調査会",,,"p. 660",1999,Aug.
"Equo Kobayashi","人体に必要な金属",,"金属材料活用事典","産業調査会",,,"p. 584",1999,Aug.
"TJ Wang,Equo Kobayashi,H Doi,T Yoneyama","Castability of Ti-6Al-7Nb alloy for dental casting",,"Journal of Medical and Dental Sciences",,"Vol. 46","No. 1","pp. 13-19",1999,July
"土居 寿,米山 隆之,Equo Kobayashi,中野 毅,浜中 人士","チタン及びチタン合金の凝固により生じる巣,",,"歯科材料・器械",,"Vol. 18","No. 2","pp. 122-127",1999,Mar.
"Equo Kobayashi","生体用チタン合金",,"材料科学",,"Vol. 36","No. 1","pp. 29-34",1999,Jan.
"Equo Kobayashi","歯科鋳造用Ti-6Al-7Nb合金",,"医用器材研究所報告",,"Vol. 32",,"p. 54",1998,Dec.
"E Kobayashi,H Doi,T Yoneyama,H Hamanaka,I R Gibson,S M Best,J C Shelton,W Bonfield","Influence of aging heat treatment on mechanical properties of biomedical Ti-Zr based ternary alloys containing niobium",,"Journal of Materials Science: Materials in Medicine",,"Vol. 9","No. 11","pp. 625-630",1998,Nov.
"E Kobayashi,T J Wang,H Doi,T Yoneyama,H Hamanaka","Mechanical properties and corrosion resistance of Ti-6Al-7Nb alloy dental castings",,"Journal of Materials Science: Materials in Medicine",,"Vol. 8","No. 10","pp. 567-574",1998,Oct.
"土居 寿,米山隆之,Equo Kobayashi,浜中人士","Mechanical properties and corrosion resistance of Ti-5Al-13Ta alloy castings",,"J. Jpn. Dent. Mater.",,"Vol. 17","No. 4","pp. 247-252",1998,July
"Equo Kobayashi","Chondrogenic cellular responses to titanium and zirconium alloys in vitro",,"Tissue Engineering",,"Vol. 4","No. 2","pp. 197-204",1998,
"Equo Kobayashi","Ti-Zr-Nb合金の開発",,"医用器材研究所報告",,"Vol. 31",,"p. 40",1997,Dec.
"土居 寿,米山隆之,Equo Kobayashi,浜中人士","Corrosion Fatigue property of titanium castings in 0.9 % NaCl solution",,"J. Jpn. Dent. Mater.",,"Vol. 16","No. 4","pp. 310-315",1997,July
"土居 寿,王 鉄軍,中野 毅,Equo Kobayashi,米山隆之,浜中人士","Ion release from Ti-6Al-7Nb alloy dental castings in 1.0 % lactic acid",,"J. Jpn. Dent. Mater.",,"Vol. 16","No. 3","pp. 182-186",1997,May
"Equo Kobayashi,浜中人士","生体用Ti-Zr合金",,"新素材",,"Vol. 8","No. 5","pp. 76-79",1997,May
"T Tsuchiya,A Nakamura,Y Ohshima,E Kobayashi,H Doi,T Yoneyama,H Hamanaka","Chondrogenic cellular responses to titanium and zirconium alloys in vitro, Tissue Engineering",,"Tissue Engineering",,"Vol. 4","No. 2","pp. 197-204",1997,Feb.
"米山隆之,Equo Kobayashi,土居 寿,浜中人士","ステンレス鋼とチタン?素材としての比較",,"骨, 関節, 靱帯",,"Vol. 10","No. 1","pp. 57-64",1997,Jan.
"T Yoneyama,H Doi,T Nakano,Equo Kobayashi,Hitoshi Hamanaka","Deformation property of titanium and dental alloys in an indentation test",,"Dentistry in Japan",,"Vol. 33",,"pp. 92-96",1997,
"浜中人士,土居 寿,Equo Kobayashi,中野 毅,小竹雅人,米山隆之","超弾性Ti-Ni合金の精密鋳造による歯科補綴応用の展望",,"医用器材研究所報告",,"Vol. 30",,"pp. 1-7",1996,Dec.