"上山吉崇","高応答多自由度電極駆動による放電加工の高速・高精度化の研究",,,,,,,2014,May
"上山吉崇","高応答多自由度電極駆動による放電加工の高速・高精度化の研究",,,,,,,2014,May
"上山吉崇","高応答多自由度電極駆動による放電加工の高速・高精度化の研究",,,,,,,2014,May
"進士 忠彦,上山 吉崇,HE Dongjue,湯澤 隆","高速・多自由度磁気浮上アクチュエータを用いた細穴放電加工","第206回電気加工研究会","電気加工技術",,"Vol. 36","No. 114","p. 6‐11",2012,July
"Yoshitaka UEYAMA,Tadahiko SHINSHI,Takashi YUZAWA,Shuichi FUJIKAWA,Xiaoyou ZHANG","Runout Compensation of Rotary Electrode in Hole Electrical Discharge Machining","The 6th International Conference on Leading Edge Manufacturing in 21st Century","Proceeding of The 6th International Conference on Leading Edge Manufacturing in 21st Century","The Japan Society of Mrchanical Engineers",,,,2011,Nov.
"上山 吉崇,進士 忠彦,湯澤 隆,佐藤 達志,張 暁友","磁気軸受による回転電極ふれまわり補正を用いた放電穴加工","2011年度精密工学会春季大会","2011年度精密工学秋春季大会学術講演会講演論文集","精密工学会",,,"p. 21-22",2011,Mar.
"上山吉崇,進士忠彦,張暁友,湯澤崇,佐藤達志","高応答・多自由度磁気浮上アクチュエータを用いた放電穴加工（穴加工速度における電極運動の方向，振幅および周波数の影響）",,"日本機械学会論文集（C編）","日本機械学会","  77","  773","  196-203",2011,Jan.
"Yoshitaka UEYAMA,Tadahiko SHINSHI,Tatsushi SATO,Xiaoyou ZHANG","Electrical Discharge Machining of Small Holes Assisted by a High Speed and Multi Dof Controlled maglev Actuator","The 4th International Conference on Positioning Technology","The 4th International Conference on Positioning Technology","The 4th International Conference on Positioning Technology",,,"pp. 119-122",2010,Nov.
"進士 忠彦,上山 吉崇,HeDongjue,張 暁友,湯澤 隆,佐藤 達志","多自由度磁気浮上アクチュエータを用いた高速・高精度放電加工の研究","第14回国際工作機械技術者会議","第14回国際工作機械技術者会議論文集（ポスターセッション論文抜粋版）","日本工作機械工業会",,,"p. 72-73",2010,Oct.
"上山吉崇,HE Dongjue,進士忠彦,湯澤隆,佐藤達志,張暁友","磁気軸受を用いた放電加工用回転電極の取り付け誤差補正","2010年度精密工学会秋季大会","2010年度精密工学会秋季大会学術講演会講演論文集","社団法人 精密工学会",,,"p. 901‐902",2010,Sept.
"上山吉崇,張暁友,進士忠彦,下河邉明,中川孝幸,佐藤達志,三宅英孝","磁気浮上アクチュエータを用いた微細穴放電加工",,"精密工学会誌","精密工学会","Vol. 76","No. 6","page 638-642",2010,June
"上山 吉崇,進士 忠彦,張 暁友,中川 孝幸,佐藤 達志","放電加工用磁気浮上アクチュエータの研究（第５報）","2010年度精密工学会春季大会","2010年度精密工学会春季大会学術講演会講演論文集","精密工学会",,,"pp. 575-576",2010,Mar.
"Yoshitaka UEYAMA,Xiaoyou ZHANG,Tadahiko SHINSHI,Akira SHIMOKOHBE,Takayuki NAKAGAWA,Tatsushi SATO,Hidetaka MIYAKE","Cooperative Control System of a Maglev Local Actuator and a Conventional EDM Machine","the 5th International Conference on Leading Edge Manufacturing in 21st Century","Proceedings of the 5th International Conference on Leading Edge Manufacturing in 21st Century","The Japan Society of Mechanical Engineers(JSME)",,"No. 09-207","pp. 203-206",2009,Dec.
"Yoshitaka UEYAMA,Tadahiko SHINSHI,Xiaoyou ZHANG,Akira SHIMOKOHBE","Small Hole Machining Using a Combination of a 5-DOF Controlled Maglev Actuator and a Conventional Electrical Discharge Machine","the 2009 JSME-IIP/ASME-ISPS Joint Conference on Micromechatronics for Information and Precision Equipment","Proceedings of the 2009 JSME-IIP/ASME-ISPS Joint Conference on Micromechatronics for Information and Precision Equipment",,,,"pp. 335-336",2009,June
"上山吉崇,張 暁友,進士忠彦,下河邉明","放電加工用磁気浮上アクチュエータの研究（第４報）?穴加工における電極ジャンプ・加振効果の検討?","2009年度 精密工学会春季大会学術講演会","2009年度精密工学会春季大会学術講演会講演論文集",,,,"pp. 877-878",2009,Mar.
"X. Zhang,Y. Ueyama,Tadahiko Shinshi,Akira Shimokohbe,T. Sato,H. Miyake,T. Nakagawa.","High-speed and High-accuracy EDM of Micro Holes by Using a 5-DOF Controlled Maglev Local Actuator","The 13th international Manufacturing Conference in China 2009 (IMCC2009)","Materials Science Forum",,"vol. 626-627",,"pp. 255-260",2009,
"上山吉崇,張暁友,進士忠彦,下河邉明","磁気浮上アクチュエータを用いた放電加工におけるジャンプフラッシング","生産と加工に関する学術講演会2008","第７回生産加工・工作機械部門講演会論文集","社団法人日本機械学会",,"No. 8-19","pp. 155-156",2008,Nov.