"西田莉那","圧電駆動型セグメント高速ステアリングミラーの研究",,,,,,,2023,Mar.
"西田莉那","圧電駆動型セグメント高速ステアリングミラーの研究",,,,,,,2023,Mar.
"西田莉那","圧電駆動型セグメント高速ステアリングミラーの研究",,,,,,,2023,Mar.
"西田莉那","圧電駆動型セグメント高速ステアリングミラーの研究",,,,,,,2023,Mar.
"Rina Nishida,Jianpeng Zhong,TADAHIKO SHINSHI","Controller Design for Piezo-driven Segmented Fast Steering Mirror","The 9th International Conference of ASPEN（ASPEN 2022）","Proc. of the 9th Intl. Conf. of Asian Society for Precision Engg. and Nanotechnology (ASPEN 2022)",,,,"pp. 338-341",2022,Nov.
"西田  莉那,鍾  建朋,進士  忠彦","セグメント高速ステアリングミラー駆動のための  圧電素子のヒステリシスの相似性を利用したコントローラゲイン調整法","2022年度精密工学会秋季大会学術講演会","2022年度精密工学会秋季大会学術講演会講演論文集",,,,"pp. 147-148",2022,Sept.
"Xiaobin Liang,Kiyoshi Miyafuji,Koki Hara,Kaede Mogi,Rina Nishida,Haonan Liu,Ken Nakajima","Direct visualization of stretch-induced phase separation in methoxy silyl-terminated polypropylene oxide/epoxy resin-type polymer alloys via AFM nanomechanics: A toughening mechanism",,"Polymer",,"Volume 259",,"  125343",2022,Sept.
"Rina Nishida,Jianpeng Zhong,Tadahiko Shinshi","Expansion of Driving Frequency and Voltage Amplitude Limits and Suppression of Dynamic Characteristic Variations of Piezoelectric Stacked Actuators by Forced Liquid Cooling with Silicone Oil","ACTUATOR 2022",,,,,"pp. 342-345",2022,June
"Rina Nishida,Jianpeng Zhong,Tadahiko Shinshi","Forced liquid cooling of piezoelectric stack actuator utilizing silicone oil",,"Precision Engineering","ELSEVIER","Vol. 75",,"  120-128",2022,May
"西田 莉那,鍾 建朋,進士 忠彦","圧電駆動型セグメント高速ステアリングミラーの非線形特性を考慮した追従 制御法","第３４回「電磁力関連のダイナミクス」シンポジウム","第３４回「電磁力関連のダイナミクス」シンポジウム論文集","日本機械学会",,"No. 22-7","  11B1-3",2022,May
"Jianpeng Zhong,Rina Nishida,Tadahiko Shinshi","Liquid cooling of stacked piezoelectric actuators for high-power operation",,"Engineering Research Express","IOP Publishing Ltd","Vol. 4","No. 2","  026001",2022,Apr.
"鍾  建朋,西田  莉那,進士  忠彦","積層型圧電素子を利用した超高応答ステアリングミラーの開発","2022年度精密工学会春季大会学術講演会","2022年度精密工学会春季大会学術講演会講演論文集","精密工学会",,"  E30","pp. 369-370",2022,Mar.
"Rina Nishida,Jianpeng Zhong,Tadahiko Shinshi","Effect of Forced Liquid Cooling on the Voltage/Charge Displacement Characteristics of Stacked Piezoelectric Actuators during High-Frequency Drive",,"Actuators 2021","MDPI","Vol. 10",,"  297",2021,Nov.
"Rina NISHIDA,Jianpeng ZHONG,Tadahiko SHINSHI","Dynamic Characteristics of Piezoelectric Stack Actuators during  Temperature Control by Liquid Cooling","International Conference on Leading Edge Manufacturing in 21st Century (LEM21)","Proceedings of International Conference on Leading Edge Manufacturing in 21st Century","The Japan Society of Mechanical Engineers",,,,2021,Nov.
"Jianpeng Zhong,Rina Nishida,Tadahiko Shinshi","Design and precision tracking control of a high-bandwidth fast steering mirror for laser beam machining",,"Precision Engineering","Elsevier","Vol. 73（2022）",,"pp. 128-139",2021,Sept.
"Jianpeng Zhong,Rina Nishida,Tadahiko SHINSHI","Digital charge control for reducing nonlinearity in fast steering mirrors driven by piezoelectric actuators","ISIE2021(The 30th International Symposium on Industrial Electronics)","Proceedings of ISIE2021","IEEE Industrial Electronics Society",,,"  978-1-7281-9023-5/21/$31.0",2021,June
"西田莉那,鍾建朋,進士忠彦","シリコーンオイルを用いた液冷により温度制御した積層型圧電素子の高周波駆動時の変位特性","2021年度精密工学会春季大会学術講演会","2021年度精密工学会春季大会学術講演会講演論文集","精密工学会",,,"pp. 440-441",2021,Mar.
"Jianpeng Zhong,Rina Nishida,Tadahiko Shinshi","A digital charge control strategy for reducing the hysteresis in piezoelectric actuators: Analysis, design, and implementation",,"Precision Engineering","ELSEVIER","Volume 67",,"page 370-382",2021,Jan.
"Rina NISHIDA,Jianpeng ZHONG,Tadahiko SHINSHI","Controlled Performance of a Segmented Fast Steering Mirror Driven by Piezoelectric Actuators","18th International Conference on Precision Engineering","Abstruct of 18th International Conference on Precision Engineering","the Japan Society for Precision Engineering",,,"  C4-1",2020,Nov.
"西田 莉那,鍾 建朋,進士 忠彦","セグメントと高速ステアリングミラー用圧電駆動型アクチュエータの開発",,"精密工学会誌 = Journal of the Japan Society of Precision Engineering","精密工学会","Vol. 86","No. 11",,2020,Nov.
"Jianpeng ZHONG,Rina NISHIDA,Tadahiko SHINSHI","A Digital Charge Control Strategy for Reducing Hysteresis in Piezoelectric Actuators","18th International Conference on Precision Engineering","Abstruct of 18th International Conference on Precision Engineering","the Japan Society for Precision Engineering",,,"  C4-2",2020,Nov.
"西田莉那,鍾建朋,進士忠彦","積層型圧電素子の液冷の研究","2020年度精密工学会秋季大会学術講演会","2020年度精密工学会秋季大会学術講演会講演論文集","精密工学会",,"  C0208","pp. 288-289",2020,Sept.
"Jianpeng Zhong,Lichuan Li,Rina Nishida,Tadahiko Shinshi","Design and evaluation of a PEA-driven fast steering mirror with a permanent magnet preload force mechanism",,"Precision Engineering","Elsevier","  62","  95-105",,2020,Mar.
"Rina Nishida,Dong Han,Jianpeng Zhong,TADAHIKO SHINSHI","Design and Control of a Segmented Fast Steering Mirror Utilizing Piezoelectric Actuators","8th International Conference of Asian Society for Precision Engineering of Nanotechnology / ASPEN2019","Abstracts of 8th International Conference of Asian Society for Precision Engineering of Nanotechnology","JSPE",,,"  B34",2019,Nov.
"西田 莉那,韓 冬,鍾 建朋,進士 忠彦","セグメント高速ステアリングミラー用圧電アクチュエータユニットのチップ・チルト及び上下駆動","2019年度精密工学会秋季大会学術講演会","2019年度精密工学会秋季学術講演会講演論文集","精密工学会",,,"pp. 449-450",2019,Sept.
"西田 莉那,韓 冬,鍾 建朋,進士 忠彦","高速ステアリングミラー用圧電駆動セグメント鏡の機構設計と性能評価","2019年度精密工学会春季大会学術講演会","2019年度精密工学会春季大会学術講演会講演論文集","精密工学会",,,"pp. 748-749",2019,Mar.
"西田 莉那,韓 冬,進士 忠彦","高速ステアリングミラー用多自由度圧電駆動セグメント鏡の開発","2018年度精密工学会秋季大会学術講演会","2018年度精密工学会秋季大会学術講演会講演論文集","精密工学会",,,"pp. 477-478",2018,Sept.
"西田 莉那,進士 忠彦","超高応答・多自由度駆動セグメント鏡の開発","第25回精密工学会学生会員卒業研究発表講演会","第25回精密工学会学生会員卒業研究発表講演会論文集","精密工学会",,,"pp. 15-16",2018,Mar.