"Yuval Kahlon,Weiheng Hu,Momoko Nakatani,Santosh Maurya,Takuya Oki,Jiang Zhu,Haruyuki Fujii","Immersive gaze sharing for enhancing education: An exploration of user experience and future directions",,"Computer & Education: X Reality","ScienceDirect","Vol. 5",,,2024,Sept.
"野田 達郎,田中 智久,朱 疆,大谷 祐輔","ボールエンドミル先端溝研削経路生成における干渉回避アルゴリズムの開発","日本機械学会生産システム部門研究発表講演会2024","日本機械学会生産システム部門研究発表講演会2024講演論文集","一般社団法人 日本機械学会",,,,2024,Mar.
"JIANG ZHU","Surface Treatment of Biomedical Materials","DTT Joint Conference on Mechanical and Medical Engineering",,,,,,2023,Nov.
"Hibiki Yamazaki,Jiang Zhu,Tomohisa Tanaka","Study on the Surface Enhancement of Thin-Walled Metallic Materials Using a Novel Double-Side Burnishing Tool",,"International Journal of Automation Technology","Fuji Technology Press Ltd.","Vol. 17","No. 5","pp. 458-468",2023,Sept.
"Yuval Kahlon,Weiheng Hu,Momoko Nakatani,Jiang Zhu,Takuya Oki,Yichuan Zhu,Haruyuki Fujii","The Holographic Studio: Real-time virtual teleportation in Mixed Reality for Enhancing Design Education","41st Education and Research in Computer Aided Architectural Design in Europe (eCAADe) Conference","eCCADe2023 Digital Design Reconsidered",,"Vol. 1",,"pp. 139-148",2023,Sept.
"神谷凌孔,朱疆,田中智久","転がりボールポイントツールを利用した薄板材料のバニ シング加工","2023年度砥粒加工学会学術講演会","2023年度砥粒加工学会学術講演会講演論文集","公益社団法人 砥粒加工学会",,,,2023,Aug.
"徳毛一瞭,朱疆,田中智久","ワーク取付における位置・姿勢の3次元計測に基づくNC加工の高精度化","日本機械学会生産システム部門研究発表講演会2023","日本機械学会生産システム部門研究発表講演会2023講演論文集","一般社団法人 日本機械学会",,"No. 23-10",,2023,Mar.
"Jiang Zhu","Challenge for the next generation smart manufacturing revolutionized by digital technology","The Sixth International Conference on Industrial Informatics - Computing Technology, Intelligent Technology, Industrial Information Integration",,,,,,2022,Dec.
"hibiki yamazaki,jiang zhu,tomohisa tanaka","Verification of the effectiveness of DSB tool in increasing the strength of thin plate material parts","The 19th International Conference on Precision Engineering","Proceeding of the 19th International Conference on Precision Engineering","The Japan Society for Precision Engineering",,,,2022,Nov.
"Hibiki Yamazaki,JIANG ZHU,TOMOHISA TANAKA","Burnishing tool capable of surface modification of thin plate material","The 19th International Machine Tool Engineers' Conference","Proceeding of the IMEC2022","Japan Machine Tool Builders’ Association",,,"pp. 54-55",2022,Nov.
"朱疆,田中智久","定力制御バニシング工具を用いたマグネシウム合金の表面改質",,"砥粒加工学会誌","公益社団法人 砥粒加工学会","Vol. 66","No. 10","pp. 558-561",2022,Oct.
"Yuval Kahlon,Momoko Nakatani,Haruyuki Fujii,Takuya Oki,Jiang Zhu,Santosh Maurya","A User Study For Facilitating Effective Remote Education In Design Studios: Towards Integration of Cyber-physical Technologies Into Design Education","The 24th International Conference on Engineering and Product Design Education","Proceeding of the 24th International Conference on Engineering and Product Design Education","Institution of Engineering Designers (IED)",,,,2022,Sept.
"Santosh MAURYA,Yuval KAHLON,Takuya OKI,Jiang ZHU,Momoko NAKATANI,Yufei LIU","UTILIZING MR TECHNOLOGIES FOR ESSENTIAL PROJECT-BASED LEARNING IN DESIGN EDUCATION","The 24th International Conference on Engineering and Product Design Education","Proceeding of the 24th International Conference on Engineering and Product Design Education","Institution of Engineering Designers (IED)",,,,2022,Sept.
"中谷 桃子,カーロン ユバル,沖 拓弥,朱 疆,マウリヤ サントシュ クマール","建築設計教育におけるオンラインコミュニケーション","Special Interest Group on Communication Enhancement (SIGCEA), Human interface Society",,,,,,2022,Aug.
"山?響,朱疆,田中智久","DSBバニシング工具による金属薄板材料仕上げ加工の評価","2022年度精密工学会春季大会学術講演会","2022年度精密工学会春季大会学術講演会論文集","一般社団法人 精密工学会",,,"pp. 731-732",2022,Mar.
"森永雅也,田中智久,朱疆,大谷祐輔","高機能なエンドミルの製造を可能にする複雑溝研削パス導出アルゴリズムの開発","生産システム部門研究発表講演会2022","生産システム部門研究発表講演会2022講演論文集","一般社団法人 日本機械学会",,,,2022,Mar.
"hibiki yamazaki,jiang zhu,tomohisa tanaka","Development of a novel burnishing tool for surface modificatio of thin-walled materials","The 10th International Conference on Leading Edge Manufacturing in 21st Century (LEM21)","Proceeding of the 10th International Conference on Leading Edge Manufacturing in 21st Century (LEM21)","The Japan Society of Mechanical Engineers",,,,2021,Nov.
"Muslimin,Katerina Mukti,Hasvienda M. Ridlwan,M. Sholeh,Ade Sumpena,Jiang Zhu,Hayato Yoshioka,Tomohisa Tanaka","Direct NC Toolpath Generation from 3D Point Cloud Datasets","the 9th Annual Southeast Asian International Seminar","Proceedings of the 9th Annual Southeast Asian International Seminar (ASAIS 2020)","Science and Technology Publications",,,"pp. 138-145",2021,Oct.
"Jiang Zhu,Chenyao Cao,Sheng Jin,Yuanrui Zhang,Tomohiro Yamazaki","Real-time vehicle occupation status detection system by integrating cloud computation and machine learning","2021 IEEE International Conference on Artificial Intelligence and Computer Applications","Proceeding of 2021 IEEE International Conference on Artificial Intelligence and Computer Applications","IEEE",,,,2021,June
"Jiang Zhu,Da Xie,Tomohisa Tanaka","Recognition of Multi-Intersecting Features of Boundary Representation CAD Model",,"Journal of Physics: Conference Series","IOP Publishing","Vol. 1827",,,2021,Mar.
"森永雅也,田中智久,朱疆,大谷祐輔","エンドミル溝部研削のための砥石の最適加工パラメータ導出アルゴリズム","日本機械学会生産システム部門研究発表講演会2021","生産システム部門研究発表講演会2021 講演論文集","一般社団法人 日本機械学会",,,,2021,Mar.
"Sheng Jin,Yuanrui Zhang,Tomohiro Yamazaki,Jiang Zhu","Automatic 3D CAD Model and 2D Drawings Generation in Construction Engineering",,"Journal of Physics: Conference Series","IOP Publishing","Vol. 1827",,,2021,Mar.
"Da Xie,Jiang Zhu,Tomohisa Tanaka","Graph-based Feature Recognition and Combination Method for Automatic Process Planning System","JSME 2020 Conference on Leading Edge Manufacturing/Material and Processing","Proceedings of JSME 2020 Conference on Leading Edge Manufacturing/Material and Processing","The American Society of Mechanical Engineers",,,,2020,June
"Chenyao Cao,Jiang Zhu,Tomohisa Tanaka,Dinh Ngoc Pham","Investigation of Corrosion Resistance Enhancement for Biodegradable Magnesium Alloy by Ball Burnishing Process",,"International Journal of Automation Technology","Fuji Technology Press Ltd.","Vol. 14","No. 2","pp. 175-183",2020,Mar.
"Jiang Zhu,Chenyao Cao,Tomohisa Tanaka","Corrosion Resistance Enhancement of Biodegradable Magnesium by Ball Burnishing Processing","The Tenth International Forum on Advanced Material Science and Technology",,,,,,2019,Dec.
"Jiang Zhu,Yurio Hosaka,Hayato Yoshioka","A Robust Algorithm to Remove the Self-intersection of 3D Mesh Data without Changing the Original Shape",,"Journal of physics : conference series","IOP Publishing","Vol. 1314","No. 1",,2019,Nov.
"Chenyao Cao,Jiang Zhu,Tomohisa Tanaka","Influence of Burnishing Process on Microstructure and Corrosion Properties of Mg Alloy AZ31","International Conference on Advanced Surface Enhancement",,,,,,2019,Sept.
"Chenyao Cao,Jiang Zhu,Tomohisa Tanaka,Fang-Jung Shiou,Shunichi Sawada,Hayato Yoshioka","Ball Burnishing of Mg Alloy Using a Newly Developed Burnishing Tool with On-machine Force Control",,"International Journal of Automation Technology","Fuji Technology Press Ltd.","Vol. 13","No. 5","pp. 619-630",2019,Sept.
"Leandro Batista da silva,Hayato Yoshioka,Hidenori Shinno,Jiang Zhu","Tool Orientation Angle Optimization for a Multi-axis Robotic Milling System",,"International Journal of Automation Technology","Fuji Technology Press Ltd.","Vol. 13","No. 5","pp. 574-582",2019,Sept.
"Minghui Shi,Kai Feng,Junhui Hu,Jiang Zhu,Hailong Cui","Near-field acoustic levitation and applications to bearings: a critical review",,"International Journal of Extreme Manufacturing","IOP Publishing","Vol. 1",,,2019,Sept.
"Chenyao Cao,Jiang Zhu,Tomohisa Tanaka","Influence of Burnishing Process on Microstructure and Corrosion Properties of Mg Alloy AZ31",,"Advanced Surface Enhancement. Lecture Notes in Mechanical Engineering","Springer, Singapore",,,"pp. 97-107",2019,Aug.
"Jiang Zhu","Adcanced Researches on Digital Manufacturing and Intelligent Manufacturing","3rd International Conference on Electrical, Mechanical and Computer Engineering",,,,,,2019,June
"酒井康徳,田中智久,小林俊矢,朱疆","異方剛性設計を施したパッシブダンパP-DACSを内包する構造物の振動応答","日本機械学会 生産システム部門研究発表講演会2019",,"日本機械学会",,,,2019,Mar.
"Cao Chenyao,朱疆,田中智久,酒井康徳","ボールバニシング加工の加工条件がマグネシウム合金の表面改質効果に及ぼす影響","2019年度精密工学会春季大会学術講演会","2019年度精密工学会春季大会学術講演会講演論文集","公益社団法人 精密工学会",,,,2019,Mar.
"Shunnya Kobayashi,Yasunori Sakai,TOMOHISA TANAKA,JIANG ZHU","Development of Structure Integrated Passive Damper (P-DACS)","the 18th International Machine Tool Engineers` Conference","Proceeding of the 18th International Machine Tool Engineers' Conference","Japan Machine Tool Builders' Association",,,"pp. 18-19",2018,Nov.
"Leandro Batista Da Silva,JIANG ZHU,Hayato Yoshioka","Tool path optimization for multi-axis robotic milling system","the 18th International Machine Tool Engineers` Conference","Proceeding of the 18th International Machine Tool Engineers' Conference","Japan Machine Tool Builders' Association",,,"pp. 90-91",2018,Nov.
"Chenyao Cao,JIANG ZHU,TOMOHISA TANAKA,Yasunori Sakai","Modification of Metal Structure Based on Burnishing Processing","the 18th International Machine Tool Engineers` Conference","Proceeding of the 18th International Machine Tool Engineers' Conference","Japan Machine Tool Builders' Association",,,"pp. 30-31",2018,Nov.
"Jiang Zhu","Laser measurement and machining technology and its application in intelligent and integrated manufacturing","Overseas Chinese Young Scholars Forum in Optoelectronics Field",,,,,,2018,June
"呉境瑩,田中智久,朱疆,酒井康徳","膜形成モード制御によるチタンへのレーザカラーリング","2018年度精密工学会春季大会学術講演会","2018年度精密工学会春季大会学術講演会講演論文集","公益社団法人 精密工学会",,,,2018,Mar.
"小林俊矢,酒井康徳,田中智久,朱疆","金属と樹脂を複合した異方剛性を有するパッシブダンパの動特性に及ぼす幾何形状の影響","2018年度精密工学会春季大会学術講演会","2018年度精密工学会春季大会学術講演会講演論文集","公益社団法人 精密工学会",,,,2018,Mar.
"JIANG ZHU,Akira Tajima,TOMOHISA TANAKA,Hayato Yoshioka","Study on the accuracy improvement for laser forming processing of micro-wire","The 9th International Conference on Leading Edge Manufacturing in 21st Century","Proceeding of The 9th International Conference on Leading Edge Manufacturing in 21st Century","Japan Society of Mechanical Engineers",,,,2017,Nov.
"山海 嘉之,朱 疆,田中 秀岳","サイバニクスで社会課題の解決に挑戦",,"精密工学会誌","公益社団法人 精密工学会","Vol. 83","No. 17","pp. 979-982",2017,Nov.
"Fang-Jung Shiou,Shih-Ju Huang,Albert J. Shih,Jiang Zhu,Masahiko Yoshino","Fine surface finish of a hardened stainless steel using a new burnishing tool",,"Procedia Manufacturing","Elsevier","Vol. 10",,"pp. 208-217",2017,July
"Yoshioka, H.,Shinno, H.,Zhu, J.,Uchiumi, M","A newly developed zero-gravity vertical motion mechanism for precision machining",,"CIRP Annals - Manufacturing Technology",,"Vol. 66","No. 1","pp. 389-392",2017,July
"山内順平,朱疆,吉岡勇人","多軸工作機械の振動 モードの解明及び振 動を考慮した切削力 オブザーバの構築","2017年度精密工学会春季大会学術講演会","2017年度精密工学会春季大会学術講演会講演論文集","公益社団法人 精密工学会",,,,2017,Mar.
"井上悟史,酒井康徳,田中智久,吉岡勇人,朱疆,星出薫,古澤竜二","静的状態での転がり 案内キャリッジに用 いる転動体の接触状 態の解明","2017年度精密工学会春季大会学術講演会","2017年度精密工学会春季大会学術講演会講演論文集","公益社団法人 精密工学会",,,,2017,Mar.
"内海 学,吉岡 勇人,朱 疆","CFRP 適用工作機械 における結合部と動 剛性の関係の研究","2017年度精密工学会春季大会学術講演会","2017年度精密工学会春季大会学術講演会講演論文集","公益社団法人 精密工学会",,,,2017,Mar.
"酒井康徳,田中智久,朱疆","金属と高分子を複合 した異方構造を有す るパッシブダンパ （P-DACS）の制振 性能に及ぼすダンパ 形状及び高分子物性 の影響","2017年度精密工学会春季大会学術講演会","2017年度精密工学会春季大会学術講演会講演論文集","公益社団法人 精密工学会",,,,2017,Mar.
"澤田隼一,朱 疆,修芳仲,吉岡勇人","定力制御を可能とし たボールバニシング 工具に関する研究","2017年度精密工学会春季大会学術講演会","2017年度精密工学会春季大会学術講演会講演論文集","公益社団法人 精密工学会",,,,2017,Mar.
"堀田 駿介,吉岡 勇人,朱 疆,田中 智久","チタンへのレーザ照射条件が表面性状及び発色に与える影響","2017年度精密工学会春季大会学術講演会","2017年度精密工学会春季大会学術講演会講演論文集","公益社団法人 精密工学会",,,,2017,Mar.
"朱 疆","デジタルマニュファクチャリングに関する研究","第11回Kodatunoオープンセミナ",,,,,,2017,Jan.
"Jiang Zhu","Current Trends and Future Direction  on Digital and Intelligent Manufacturing","2016 Yuelu Forum of  International Young Scholars","2016 Yuelu Forum of  International Young Scholars Engineering/Material Science","Hunan University",,,,2016,Dec.
"Yasunori Sakai,So Fukasawa,Jiang Zhu,Hayato Yoshioka,Tomohisa Tanaka,Kaoru Hoshide,Ryuji Furusawa","Influence of Designing Parameters on Vibration Damping of Rolling Guideway","16th International Conference on Precision Engineering","Proceeding of 16th International Conference on Precision Engineering","The Japan Society for Precision Engineering",,,,2016,Nov.
"Shunsuke Hotta,Jiang Zhu,Hayato Yoshioka,Tomohisa Tanaka","Study on the mechanism of titanium oxide layer growth by laser irradiation on titanium","16th International Conference on Precision Engineering","Proceeding of 16th International Conference on Precision Engineering","The Japan Society for Precision Engineering",,,,2016,Nov.
"Jiang Zhu,Shunsuke Hotta,Hayato Yoshioka,Tomohisa Tanaka","Study on the titanium oxide layer generation mechanism by YVO4 laser irradiation on titanium","the 8th Japan-Taiwan workshop on mechanical engineering and aerospace","Proceeding of the 8th Japan-Taiwan workshop on mechanical engineering and aerospace",,,,,2016,Nov.
"Hayato Yoshioka,Jiang Zhu,Toshiki Hanaoka,Yasunori Sakai","Influence of angular error in multi-axis machine tool on estimation of Machining force by disturbance observer","the 17th International Machine Tool Engineers` Conference","Proceedings of the 17th International Machine Tool Engineers` Conference","Japan Machine Tool Builders' Association",,,"pp. 132-133",2016,Nov.
"Shunsuke Hotta,Jiang Zhu,Tomohisa Tanaka,Hayato Yoshioka","Titanium Coloring Machining by Laser Irradiation","the 17th International Machine Tool Engineers` Conference","Proceedings of the 17th International Machine Tool Engineers` Conference","Japan Machine Tool Builders' Association",,,"pp. 84-85",2016,Nov.
"酒井康徳,田中智久,朱疆","熱硬化性樹脂の制振性に及ぼすフィラー条件の影響","第11回日本機械学会生産加工・工作機械部門講演会","第11回生産加工・工作機械部門講演会 講演論文集","日本機械学会",,,"pp. 137-138",2016,Oct.
"澤田隼一,朱疆,修芳仲,吉岡勇人","ロードセルを内蔵した工具を用いたSUS420材のボールバニシング加工","第11回日本機械学会生産加工・工作機械部門講演会","第11回生産加工・工作機械部門講演会 講演論文集",,,,"pp. 137-138",2016,Oct.
"Muslimin,Zhu, J.,Yoshioka, H.,Tanaka, T.","Automatic segmentation and feature identification of laser scanning point cloud data for reverse engineering","International Symposium on Flexible Automation","Proceedings of International Symposium on Flexible Automation",,,,,2016,Aug.
"保坂 友利雄,朱 疆,吉岡 勇人","自己交差を含む三次元メッシュの形状維持修正法","日本機械学会関東支部第22期総会講演会","日本機械学会関東支部第22期総会講演会講演論文集","日本機械学会",,"No. 160-1",,2016,Mar.
"田島彬,吉岡 勇人,朱 疆,田中智久","金属極細線のレーザフォーミングにおける加工精度向上手法の研究","2016年度精密工学会春季大会学術講演会","2016年度精密工学会春季大会学術講演会講演論文集","精密工学会",,,"pp. 817-818",2016,Mar.
"花岡俊樹,朱 疆,吉岡 勇人,酒井康徳","多軸工作機械の振動特性が外乱オブザーバによる切削力推定に及ぼす影響","2016年度精密工学会春季大会学術講演会","2016年度精密工学会春季大会学術講演会講演論文集","精密工学会",,,"pp. 761-762",2016,Mar.
"酒井康徳,朱 疆,吉岡 勇人,田中 智久","転がり案内の非線形な周波数応答に及ぼす潤滑油の影響","2016年度精密工学会春季大会学術講演会","2016年度精密工学会春季大会学術講演会講演論文集","精密工学会",,,"pp. 739-740",2016,Mar.
"堀田 駿介,吉岡 勇人,朱 疆,田中 智久","YVO4レーザを用いたチタンへのカラーリング-加工条件と発色の関係-","日本機械学会関東支部第22期総会講演会","日本機械学会関東支部第22期総会講演会講演論文集","日本機械学会",,"No. 160-1",,2016,Mar.
"深澤奏,酒井康徳,朱 疆,吉岡 勇人,田中 智久,星出 薫,古澤竜二","転動体の接触状態が転がり案内の減衰に及ぼす影響","日本機械学会関東支部第22期総会講演会","日本機械学会関東支部第22期総会講演会講演論文集","日本機械学会",,"No. 160-1",,2016,Mar.
"酒井康徳,深澤奏,朱 疆,吉岡 勇人,田中 智久,星出 薫,古澤竜二","転がり案内を模擬した接触減衰評価装置の試作","日本機械学会関東支部第22期総会講演会","日本機械学会関東支部第22期総会講演会講演論文集","日本機械学会",,"No. 160-1",,2016,Mar.
"バチスタ レアンドロ,酒井 康徳,朱 疆,吉岡 勇人","レーザダイシングにおける加工条件がSiCウェハの加工精度に及ぼす影響","日本機械学会関東支部第22期総会講演会","日本機械学会関東支部第22期総会講演会講演論文集","日本機械学会",,"No. 160-1",,2016,Mar.
"Muslimin,Jiang ZHU,Hayato YOSHIOKA,Tomohisa TANAKA,Yoshio SAITO","Study on plane feature extraction in registration of laser scanning data sets for reverse engineering",,"Journal of Advanced Mechanical Design, Systems, and Manufacturing",,"Vol. 9","No. 5","pp. 1-14",2015,Dec.
"Tomohisa Tanaka,Shinya Oishi,Jiang Zhu,Yoshio Saito","Study on the mechanism of laser forming to the thin stainless-steel wire",,"International Journal of Nanomanufacturing","Inderscience Enterprises Ltd.","Vol. 11","No. 3/4","pp. 219-236",2015,Nov.
"Muslimin,Jiang Zhu,Hayato Yoshioka,Tomohisa Tanaka,Yoshio Saito","The Utilization of Feature Extraction in Registration Method of Laser Data Sets in Reverse Engineering of Fidelity and Precision Part","The 8th International Conference on Leading Edge Manufacturing in 21st Century","Proceeding of the 8th International Conference on Leading Edge Manufacturing in 21st Century","the Japan Society of Mechanical Engineers",,,,2015,Oct.
"Tomohisa Tanaka,Syo Harada,Jiang Zhu,Hayato Yoshioka,Yoshio Saito","Fundamental Study for Control of Hue and Brightness in the Laser Coloring","The 8th International Conference on Leading Edge Manufacturing in 21st Century","Proceeding of the 8th International Conference on Leading Edge Manufacturing in 21st Century","the Japan Society of Mechanical Engineers",,,,2015,Oct.
"酒井康徳,朱,吉岡勇人,田中智久","有限要素法を用いたローラガイドの鉛直及び横方向剛性の同定","日本機械学会2015年度年次大会",,,,,,2015,Sept.
"Jiang Zhu,Masato Kato,Hayato Yoshioka,Yoshio Saito,Tomohisa Tanaka","Research on Feature Recognition from STEP model for Automatic Process Planning of Multi-tasking Machine","The 6th International Conference of Asian Society for Precision Engineering and Nanotechnology (ASPEN2015)","Proceeding of the 6th International Conference of Asian Society for Precision Engineering and Nanotechnology (ASPEN2015)","Asian Society for Precision Engineering and Nanotechnology(ASPEN)",,,,2015,Sept.
"Jiang ZHU,Masato KATO,Tomohisa TANAKA,Hayato YOSHIOKA,Yoshio SAITO","Graph based automatic process planning system for multi-tasking machine",,"Journal of Advanced Mechanical Design, Systems, and Manufacturing","The Japan Society of Mechanical Engineers","Vol. 9","No. 3",,2015,Aug.
"朱 疆,齋藤 義夫","樹脂材料の加工特性及び積層造型と切削加工によるハイブリッド造型法に関する研究","日本設計工学会2015年度春季大会研究発表講演会","日本設計工学会2015年度春季大会研究発表講演会講演論文集","公益社団法人 日本設計工学会",,,"pp. 51-52",2015,May
"原田将,朱 疆,田中智久,吉岡勇人,齋藤義夫","チタンへのレーザ照射による構造色に関する研究?色再現性の向上と広色空間の実現","日本機械学会生産システム部門研究発表講演会2015","日本機械学会生産システム部門研究発表講演会2015講演論文集","一般社団法人 日本機械学会",,"No. 15-8","pp. 109-110",2015,Mar.
"酒井康徳,吉岡勇人,朱疆,齋藤義夫,田中智久","転がり案内における非線形摩擦に起因する振動の複素ばねモデルを用いた解析","2015年度精密工学会春季大会学術講演会","2015年度精密工学会春季大会学術講演会講演論文集","社団法人精密工学会",,,"pp. 351-352",2015,Mar.
"高卉?,朱疆,吉岡勇人,齋藤義夫,田中智久","自律分散システムを用いた柔軟な生産スケジューリングシステムの構築","2015年度精密工学会春季大会学術講演会","2015年度精密工学会春季大会学術講演会講演論文集","社団法人精密工学会",,,"pp. 267-268",2015,Mar.
"Muslimin,Jiang Zhu,Hayato Yoshioka,Tomohisa Tanaka,Yoshio Saito","A New Method for Registration Laser Data Sets and CMM Data Sets in Reverse Engineering of Accurate Part","Spring Annual Meeting of the Japan Society for Procession Engineering 2015","Proceeding of Spring Annual Meeting of the Japan Society for Procession Engineering 2015","The Japan Society of Precision Engineering",,,"pp. 1101-1102",2015,Mar.
"Saurabh Bhide,Jiang Zhu,Hayato Yoshioka,Tomohisa Tanaka,Yoshio Saito","Calculation of Intersection Points between Triangulated Mesh and Point Cloud Data","Spring Annual Meeting of the Japan Society for Procession Engineering 2015","Proceeding of Spring Annual Meeting of the Japan Society for Procession Engineering 2015","The Japan Society of Precision Engineering",,,"pp. 1099-1100",2015,Mar.
"原幹也,朱疆,吉岡勇人,齋藤義夫,田中智久","切削条件がPTFEの加工面精度に与える影響に関する研究","2015年度精密工学会春季大会学術講演会","2015年度精密工学会春季大会学術講演会講演論文集","社団法人精密工学会",,,"pp. 1039-1040",2015,Mar.
"加藤雅人,朱疆,吉岡勇人,齋藤義夫,田中智久","グラフを用いた複合加工機のための自動加工工程設計システム","2015年度精密工学会春季大会学術講演会","2015年度精密工学会春季大会学術講演会講演論文集","社団法人精密工学会",,,"pp. 773-774",2015,Mar.
"長瀬重信,朱疆,吉岡勇人,齋藤義夫,田中智久","分割領域毎の最適加工パスによる自由曲面加工の効率化","2015年度精密工学会春季大会学術講演会","2015年度精密工学会春季大会学術講演会講演論文集","社団法人精密工学会",,,"pp. 771-772",2015,Mar.
"Yasunori SAKAI,Tomohisa TANAKA,Hayato YOSHIOKA,Jiang ZHU,Masaomi TSUTSUMI,Yoshio SAITO","Influence of nonlinear spring behavior of friction on dynamic characteristics of a rolling guideway",,"Journal of Advanced Mechanical Design, Systems, and Manufacturing","The Japan Society of Mechanical Engineers","Vol. 9","No. 1","pp. 1-15",2015,Jan.
"yuanrui zhang,JIANG ZHU,Hayato Yoshioka,YOSHIO SAITO,TOMOHISA TANAKA","Study on the error compensation and accuracy improvement of 6-DOF parallel mechanism worktable","the 16th International Machine Tool Engineers` Conference","Proceeding of the 16th International Machine Tool Engineers` Conference","Japan Machine Tool Builders' Association",,,,2014,Nov.
"Yasunori SAKAI,Jiang Zhu,Tomohisa Tanaka,Hayato Yoshioka,Yoshio Saito","Influence of Hysteresis Behavior of Friction on Dynamic Characteristics of Rolling Guideway","MECHATRONICS 2014","Proceedings of MECHATRONICS 2014",,,"No. OS-000671",,2014,Nov.
"Yasunori Sakai,JIANG ZHU,TOMOHISA TANAKA,Hayato Yoshioka,YOSHIO SAITO","Influence of Excitation Force on Damping of Rolling Guideway in Feed and Pitch Direction","the 16th International Machine Tool Engineers` Conference","Proceeding of the 16th International Machine Tool Engineers` Conference","Japan Machine Tool Builders' Association",,,,2014,Nov.
"酒井康徳,朱 疆,田中智久,吉岡勇人,齋藤義夫","転がり出し領域における摩擦が転がり案内の送り方向動特性に及ぼす影響","第10回 日本機械学会生産加工・工作機械部門講演会",,,,,"pp. 97-98",2014,Nov.
"原 幹也,朱 疆,田中 智久,齋藤 義夫","切削条件が PTFE エンドミル加工の切削抵抗に及ぼす影響","２０１４年度砥粒加工学会学術講演会","２０１４年度砥粒加工学会学術講演会論文集","公益社団法人 砥粒加工学会",,,,2014,Sept.
"Jiang Zhu,Tomohisa Tanaka,Yoshio Saito","Research on 3D Model Processing Technologies in the Application of Freeform Surface Machining",,"Advanced Materials Research","Trans Tech Publications, Switzerland","Vol. 1017",,"pp. 281-286",2014,Sept.
"Nitin Sharma,Jiang Zhu,Tomohisa Tanaka,Yoshio Saito","Feature Extraction Based 3D Model Registration for Surface Finish Quality Evaluation",,"Advanced Materials Research","Trans Tech Publications, Switzerland","Vol. 1017",,"pp. 141-146",2014,Sept.
"JIANG Zhu,AKIMITSU Hozumi,TOMOHISA Tanaka,Yoshio Saito","High Efficiency Tool Path Generation for Freeform Surface Machining Based on NURBS Subdivision",,"Key Engineering Materials","Trans Tech Publications, Switzerland","Vol. 625",,"pp. 372-377",2014,Aug.
"Yuanrui Zhang,Shigenobu Nagase,Jiang Zhu,Tomohisa Tanaka,Yoshio Saito","Positioning calibration of a parallel mechanism worktable with 6-DOF",,"Key Engineering Materials","Trans Tech Publications, Switzerland","Vol. 625",,"pp. 392-397",2014,Aug.
"小池勇樹,朱疆,田中智久,齋藤義夫","LSI製造プロセスにおける搬送経路に基づくマルチクラスタシステムの効率化","2014年度精密工学会春季大会学術講演会","2014年度精密工学会春季大会学術講演会講演論文集",,,,,2014,Mar.
"大石真也,田中智久,朱疆,齋藤義夫","ステンレス線材のレーザフォーミングメカニズムに関する研究","日本機械学会生産システム部門研究発表講演会2014","日本機械学会生産システム部門研究発表講演会2014講演論文集","日本機械学会",,"No. 14-8","pp. 105-106",2014,Mar.
"酒井康徳,花岡俊樹,朱疆,齋藤義夫,田中智久","加振力振幅が直動転がり案内の動特性に及ぼす影響","2014年度精密工学会春季大会学術講演会","2014年度精密工学会春季大会学術講演会講演論文集",,,,,2014,Mar.
"Nitin Sharma,Jiang Zhu,Tomohisa Tanaka,Yoshio Saito","3D Model Registration Based on Feature Extraction Using Segmentation","2014年度精密工学会春季大会学術講演会","2014年度精密工学会春季大会学術講演会講演論文集",,,,,2014,Mar.
"前田直輝,朱疆,田中智久,齋藤義夫","レーザを用いた金属細線の積層による3次元形状の創成","日本機械学会生産システム部門研究発表講演会2014","日本機械学会生産システム部門研究発表講演会2014講演論文集","日本機械学会",,"No. 14-8","pp. 107-108",2014,Mar.
"Xu Zhou,Tomohisa Tanaka,Jiang Zhu,Yoshio Saito","Titanium Coloring Mechanism through Laser Irradiation","the 5th International Conference of Asian Society for Precision Engineering and Nanotechnology","Proceeding of the 5th International Conference of Asian Society for Precision Engineering and Nanotechnology",,,,,2013,Nov.
"Jiang ZHU,Saori MUTO,Tomohisa Tanaka,Yoshio SAITO","Development of Automatic Machining Process Deciding System Based on 3D-Model","The 7th International Conference on Leading Edge Manufacturing in 21st Century (LEM21)","Proceeding of the 7th International Conference on Leading Edge Manufacturing in 21st Century (LEM21)",,,,"pp. 123-128",2013,Nov.
"Tomohisa Tanaka,Shinya Oishi,Jiang Zhu,Yoshio Saito","Study on the Laser Forming of Thin Stainless-steel Wire","the 5th International Conference of Asian Society for Precision Engineering and Nanotechnology","Proceeding of the 5th International Conference of Asian Society for Precision Engineering and Nanotechnology",,,,,2013,Nov.
"原幹也,朱疆,田中智久,齋藤義夫","切削条件がPTFEの加工面性状に与える影響に関する研究","ABTEC2013砥粒加工学会学術講演会","ABTEC2013砥粒加工学会学術講演会講演論文集","砥粒加工学会",,,"pp. 214-216",2013,Aug.
"大石真也,田中智久,朱疆,齋藤義夫","ステンレス線材へのレーザフォーミングの適用","日本機械学会生産システム部門研究発表講演会2013","日本機械学会生産システム部門研究発表講演会2013講演論文集","日本機械学会",,"No. 13-6","pp. 69-70",2013,Mar.
"武藤沙織,朱疆,田中智久,齋藤義夫","三次元形状モデルからの加工工程自動決定システムの開発","2013年度精密工学会春季大会","Proceeding of Spring Annual Meeting of the Japan Society for Procession Engineering 2013","社団法人精密工学会",,,"pp. 1073-1074",2013,Mar.
"穂積昭充,朱疆,田中智久,齋藤義夫","NURBS曲面の分割による高効率加工パスの生成","2013年度精密工学会春季大会","Proceeding of Spring Annual Meeting of the Japan Society for Procession Engineering 2013","社団法人精密工学会",,,"pp. 1065-1066",2013,Mar.
"長谷川将臣,朱疆,田中智久,齋藤義夫","多分解能メッシュによる多軸加工機の粗加工の効率化","2013年度精密工学会春季大会","Proceeding of Spring Annual Meeting of the Japan Society for Procession Engineering 2013","社団法人精密工学会",,,"pp. 55-56",2013,Mar.
"Osama Abdelaal,Jiang Zhu,Tomohisa Tanaka,Saied Darwish,Yoshio Saito","Additive Manufacturing of Custom-made Hip Implants","The Japan Society of Mechanical Engineers, Manufacturing Systems Division Conference 2013","Proceeding of The Japan Society of Mechanical Engineers, Manufacturing Systems Division Conference 2013","The Japan Society of Mechanical Engineers",,"No. 13-6","pp. 91-92",2013,Mar.
"Yuanrui Zhang,Jiang Zhu,Tomohisa Tanaka,Yoshio Saito","Research on the error compensation and machining accuracy about the 6-DOF parallel mechanism table","the 15th International Machine Tool Engineers` Conference","Proceeding of the 15th International Machine Tool Engineers` Conference","Japan Machine Tool Builders` Association",,,"pp. 6-7",2012,Nov.
"Yuanrui Zhang,Jiang Zhu,Tomohisa Tanaka,Yoshio Saito","Measurement of Movement Error and Its Compensation for 6-DOF Parallel Mechanism Worktable",,"Key Egineering Materials (Emerging Technology in Precision Engineering XIV)","Trans Tech Publications Ltd","Vol. 523-524",,"pp. 463-468",2012,Nov.
"Xu Zhou,Jiang Zhu,Tomohisa Tanaka,Yoshio Saito","Research on the Structural Color Appearance of Titanium by Laser Irradiation","the 15th International Machine Tool Engineers` Conference","Proceeding of the 15th International Machine Tool Engineers` Conference",,,,"pp. 8-9",2012,Nov.
"周煦,朱疆,田中智久,齋藤義夫","レーザ照射によるチタン酸化被膜の発色メカニズムに関する研究","第9回生産加工・工作機械部門講演会","第9回生産加工・工作機械部門講演会論文集","日本機械学会",,"No. 12-10","pp. 275-276",2012,Oct.
"朱疆,後藤純平,田中智久,齋藤義夫","放電加工を利用した積層造型法のツールパス生成","第9回生産加工・工作機械部門講演会","第9回生産加工・工作機械部門講演会論文集","日本機械学会",,"No. 12-10","pp. 103-104",2012,Oct.
"Shunsuke Oike,Tomohisa Tanaka,Jiang Zhu,Yoshio Saito","Robust Production Scheduling Using Autonomous Distributed Systems",,"Key Engineering Materials","Trans Tech Publications","Vol. 516",,"pp. 166-169",2012,June
"Kohei Ogura,Jiang Zhu,Tomohisa Tanaka,Yoshio Saito","Characteristics of Excimer Laser Ablation for Three Dimensional Machining of PMMA",,"Key Engineering Materials","Trans Tech Publications","Vol. 516",,"pp. 192-197",2012,June
"飯塚祐哉,朱 疆,田中 智久,齋藤 義夫","レーザフォーミングによる細線構造物の造形に関する研究","2012年度精密工学会春季大会学術講演会","2012年度精密工学会春季大会学術講演会講演論文集","社団法人精密工学会",,,"pp. 05-06",2012,Mar.
"関口 翔太,朱 疆,田中 智久,齋藤 義夫","8軸冗長ロボットシステムを用いた加工システムの構築","2012年度精密工学会春季大会学術講演会","2012年度精密工学会春季大会学術講演会講演論文集","社団法人精密工学会",,,"pp. 675-676",2012,Mar.
"塚崎 遥,朱 疆,田中 智久,齋藤 義夫","レーザを用いた金属樹脂混成積層造形に関する研究","2012年度精密工学会春季大会学術講演会","2012年度精密工学会春季大会学術講演会講演論文集","社団法人精密工学会",,,"pp. 15-16",2012,Mar.
"長谷川将臣,朱疆,田中智久,齋藤義夫","多分解能メッシュによるターニングセンタの粗加工工程の検証","日本機械学会生産システム部門研究発表講演会2012","日本機械学会生産システム部門研究発表講演会2012講演論文集","一般社団法人 日本機械学会",,"No. 12-7","pp. 29-30",2012,Mar.
"張遠瑞,武 建涛,朱 疆,田中 智久,齋藤 義夫","6-DOFパラレルメカニズムのワークテーブルの誤差要因解析","2012年度精密工学会春季大会学術講演会","2012年度精密工学会春季大会学術講演会講演論文集","社団法人精密工学会",,,"pp. 843-844",2012,Mar.
"Xiaoyi Wang,Jing Chen,Jiang Zhu,Yoshio Saito,Tomohisa Tanaka","Registration of 3-D Shape with Free-form Surface Using Imageware and Genetic Algorithm",,"Advanced Materials Research","Trans Tech Publications","Vol. 472-475",,"pp. 317-322",2012,Feb.
"Jiang Zhu,Tomohisa Tanaka,Yoshio Saito","Tool Path Generation for 3D Freeform Surface Machining Based on the Feature of CAD Model","The 2nd IFToMM Asian Conference on Mechanism and Machine Science",,,,,,2012,
"Jiang Zhu,Yusuke Narabu,Tomohisa Tanaka,Yoshio Saito","Manufacturing Feature Extraction System of 3D-Model for Process Planning","The 6th International Conference on Leading Edge Manufacturing in 21st Century (LEM21)","Proceeding of The 6th International Conference on Leading Edge Manufacturing in 21st Century (LEM21)","The Japan Society of Mechanical Engineers (JSME)",,,,2011,Nov.
"Takahiro Kubo,Jiang Zhu,Tomohisa Tanaka,Yoshio Saito","The Contact Part Measurement on Rough Surface by Optical Methodology in High Load Region","The 6th International Conference on Leading Edge Manufacturing in 21st Century (LEM21)","Proceeding of The 6th International Conference on Leading Edge Manufacturing in 21st Century (LEM21)","The Japan Society of Mechanical Engineers (JSME)",,,,2011,Nov.
"Jiang Zhu,Tomohisa TANAKA,Yoshio SAITO,Ryuta TANABE,Masaaki TAKENAKA,Toru FUKAMI","On-machine Measuring and Machining of Freeform Surface Using a Polar-coordinate Desktop Machine Tool",,"Journal of Advanced Mechanical Design, Systems, and Manufacturing","The Japan Society of Mechanical Engineers","Vol. 5","No. 4","pp. 240-251",2011,Oct.
"武藤沙織,朱 疆,田中 智久,齋藤 義夫","RP装置による三次元形状の創成と評価","日本機械学会2011年度年次大会","日本機械学会2011年度年次大会 講演論文集","一般社団法人 日本機械学会",,"No. 11-1",,2011,Sept.
"飯塚裕哉,朱 疆,田中 智久,齋藤 義夫","レーザフォーミングによる細線構造物造形","日本機械学会2011年度年次大会","日本機械学会2011年度年次大会 講演論文集","一般社団法人 日本機械学会",,"No. 11-1",,2011,Sept.
"大池 瞬介,田中 智久,朱 疆,齋藤 義夫","自律分散システムを応用した堅牢な生産スケジューリングシステム","日本機械学会2011年度年次大会","日本機械学会2011年度年次大会 講演論文集","一般社団法人 日本機械学会",,"No. 11-1",,2011,Sept.
"関口 翔太,朱 疆,田中 智久,齋藤 義夫","8軸冗長ロボットシステムによる三次元加工","日本機械学会2011年度年次大会","日本機械学会2011年度年次大会 講演論文集","一般社団法人 日本機械学会",,"No. 11-1",,2011,Sept.
"木下 真也,朱 疆,田中 智久,齋藤 義夫","チタンへのレーザ照射による構造色の発見に関する研究","日本機械学会2011年度年次大会","日本機械学会2011年度年次大会 講演論文集","一般社団法人 日本機械学会",,"No. 11-1",,2011,Sept.
"西尾 拓,朱 疆,田中 智久,齋藤 義夫","レーザーを用いた異種材料混成造形物創成のための基礎的研究","日本機械学会2011年度年次大会","日本機械学会2011年度年次大会 講演論文集","一般社団法人 日本機械学会",,"No. 11-1",,2011,Sept.
"穂積 昭充,朱 疆,田中 智久,齋藤 義夫","6軸制御ワイヤ放電加工機用加工支援システムの作成","日本機械学会2011年度年次大会","日本機械学会2011年度年次大会 講演論文集","一般社団法人 日本機械学会",,"No. 11-1",,2011,Sept.
"塚崎 遥,朱 疆,田中 智久,齋藤 義夫","5軸制御によるサポートフリーRP装置の開発","日本機械学会2011年度年次大会","日本機械学会2011年度年次大会 講演論文集","一般社団法人 日本機械学会",,"No. 11-1",,2011,Sept.
"Jiang Zhu,Yuichi Takekuma,Tomohisa Tanaka,Yoshio Saito","3D Model Registration Based on Feature Extraction",,"Advanced Materials Research","Trans Tech Publications, Switzerland","Vol. 299-300",,"pp. 1091-1094",2011,July
"Asim Al-Sofi,Yoshio Saito,Tomohisa Tanaka,Jiang Zhu","Generating the Measurement Points Based on Finishing NC Data","2011 IEEE International Conference on Mechatronics (ICM)","Proceeding of 2011 IEEE International Conference on Mechatronics (ICM)",,,,"pp. 34-38",2011,Apr.
"Jiang Zhu,Tomohisa Tanaka,Yoshio Saito,Lining Sun","Study on virtual environment-based simulation, control and teleoperation in the application of robotic machining and manipulation",,"International Journal of Design Engineering","Inderscience Enterprises Ltd.","Vol. 3","No. 3","pp. 218-231",2011,Apr.
"小倉康平,田中智久,朱疆,齋藤義夫","PMMAの三次元形状加工に向けたエキシマレーザアブレーションの加工特性","2011年度精密工学会春季大会学術講演会","2011年度精密工学会春季大会学術講演会講演論文集","社団法人精密工学会",,,"pp. 125-126",2011,Mar.
"大池瞬介,田中智久,朱疆,齋藤義夫","自律分散システムを応用した堅牢な生産スケジューリングシステム","日本機械学会生産システム部門研究発表講演会2011","日本機械学会生産システム部門研究発表講演会2011講演論文集","一般社団法人 日本機械学会",,"No. 11-7","pp. 85-86",2011,Mar.
"Jiang Zhu,Akira Yanagisawa,Tomohisa Tanaka,Yoshio Saito","Development of Tool Path Generation System for Polar-coordinate Desktop Machine Tool(PDMT)","The 6th International Conference on MicroManufacturing ICOMM/2011","Proceeding of the 6th International Conference on MicroManufacturing ICOMM/2011","Tokyo Denki University",,,"pp. 149-156",2011,Mar.
"久保喬弘,朱疆,田中智久,齋藤義夫","粗さ接触面における接触部直接観察による高荷重摩耗特性評価","2011年度精密工学会春季大会学術講演会","2011年度精密工学会春季大会学術講演会講演論文集","社団法人精密工学会",,,"pp. 759-760",2011,Mar.
"武隈裕一,朱疆,田中智久,齋藤義夫","三次元モデルの比較による形状評価システムの構築","2011年度精密工学会春季大会学術講演会","2011年度精密工学会春季大会学術講演会講演論文集","社団法人精密工学会",,,"pp. 665-666",2011,Mar.
"奈良部優介,朱疆,田中智久,齋藤義夫","三次元形状モデルからの加工法自動決定システムの開発","2011年度精密工学会春季大会学術講演会","2011年度精密工学会春季大会学術講演会講演論文集","社団法人精密工学会",,,"pp. 577-578",2011,Mar.
"Jiang Zhu,Keisuke Nomura,Tomohisa Tanaka,Yoshio Saito","Rough Machining Tool Path Generation for Multi-axis Turning Center Based on Multi-resolution Mesh","The 14th International Conference on Mechatronics Technology","Proceeding of the 14th International Conference on Mechatronics Technology",,,,"pp. 12-16",2010,Nov.
"新宅健吾,朱疆,田中智久,齋藤義夫","既加工部の形状測定データを利用したワーク付け替え時における精度維持","生産と加工に関する学術講演会2010","日本機械学会 第八回生産加工・工作機械部門講演会講演論文集","社団法人 日本機械学会",,"No. 10-11","pp. 243-244",2010,Oct.
"Shota Sekiguchi,JIANG ZHU,TOMOHISA TANAKA,YOSHIO SAITO","Freeform Surface Machining and Measurement by 8-axis Robot System","The 14th International Machine Tool Engineers' Conference","Proceedings of the 14th International Machine Tool Egineers' Conference","Japan Machine Tool Builders' Association",,,"pp. 80-81",2010,Oct.
"Tomohisa Tanaka,Ryo Suzuki,Jiang Zhu,Yoshio Saito","Excimer Laser 3D Machining Based on Irradiation Pulse Number Control",,"Journal of Advanced Mechanical Design, Systems, and Manufacturing","The Japan Society of Mechanical Engineers","Vol. 4","No. 5","pp. 1033-1043",2010,Sept.
"西山浩司,朱疆,田中智久,齋藤義夫","2.5軸輪郭加工に適した高効率加工パスの生成","2010年度精密工学会秋季大会学術講演会","2010年度精密工学会秋季大会学術講演会講演論文集","社団法人精密工学会",,,"pp. 403-404",2010,Sept.
"久保喬弘,朱疆,田中智久,齋藤義夫","高荷重域における粗さ接触表面下の塑性変形状態判別","ABTEC2010砥粒加工学会学術講演会","ABTEC2010砥粒加工学会学術講演会講演論文集","社団法人 砥粒加工学会",,,"pp. 179-180",2010,Aug.
"Yuusuke Narabu,JIANG ZHU,TOMOHISA TANAKA,YOSHIO SAITO","Automatic Manufacturing Feature Extraction of CAD Models for Machining",,"Key Engineering Materials","Trans Tech Publications","Vol. 447-448",,"pp. 287-291",2010,July
"TOMOHISA TANAKA,Masahiro Komori,JIANG ZHU,YOSHIO SAITO","Development of Flexible Worktable for Endmilling Based on Parallel Mechanism",,"Key Engineering Materials","Trans Tech Publications","Vol. 447-448",,"pp. 826-830",2010,July
"JIANG ZHU,Keisuke Nomura,TOMOHISA TANAKA,YOSHIO SAITO","Tool Path Planning Assist System for Freeform Surface Machining",,"Key Engineering Materials","Trans Tech Publications","Vol. 447-448",,"pp. 321-325",2010,July
"野村佳佑,朱疆,田中智久,齋藤義夫","多分解能メッシュによるターニングセンタの高効率化加工","2010年度精密工学会春季大会学術講演会","2010年度精密工学会春季大会学術講演会講演論文集","社団法人精密工学会",,,"pp. 1037-1038",2010,Mar.
"小森正裕,朱疆,田中智久,齋藤義夫","6軸パラレルメカニズムを用いたワークテーブルの開発","2010年度精密工学会春季大会学術講演会","2010年度精密工学会春季大会学術講演会講演論文集","社団法人精密工学会",,,"pp. 1039-1040",2010,Mar.
"奈良部優介,朱疆,田中智久,齋藤義夫","加工のためのCADモデル特徴領域の自動抽出","日本機械学会北陸信越支部第47期総会・講演会","日本機械学会北陸信越支部第47期総会・講演会講演論文集","社団法人日本機械学会北陸信越支部",,"No. 107-1","pp. 409-410",2010,Mar.
"Xiaoyi Wang,Quanxian Wang,Yoshio Saito,Jiang Zhu,Tomohisa Tanaka","Reorganizable Assembly Model and Its Reorganizing Approach for Assembly Planning","the 5th International Conference on Leading Edge Manufacturing in 21st Century (LEM21)","Proceedings of the 5th International Conference on Leading Edge Manufacturing in 21st Century (LEM21)","The Japan Society of Mechanical Engineers (JSME)",,"No. 09-207","pp. 21-26",2009,Dec.
"Jiang Zhu,Ryota Tanabe,Tomohisa Tanaka,Yoshio Saito","Polar-coordinate Desktop Machine Tool, an Intelligent Digital 3D Duplicator","the 5th International Conference on Leading Edge Manufacturing in 21st Century (LEM21)","Proceedings of the 5th International Conference on Leading Edge Manufacturing in 21st Century (LEM21)","The Japan Society of Mechanical Engineers (JSME)",,"No. 09-207","pp. 133-138",2009,Dec.
"Zuanshi Haranud,Jiang Zhu,Tomohisa Tanaka,Yoshio Saito","Optimal Tool Path Generation Method for Freeform Surface Machining","the 5th International Conference on Leading Edge Manufacturing in 21st Century (LEM21)","Proceedings of the 5th International Conference on Leading Edge Manufacturing in 21st Century (LEM21)","The Japan Society of Mechanical Engineers (JSME)",,"No. 09-207","pp. 3-8",2009,Dec.
"Ryo Suzuki,Jiang Zhu,Tomohisa Tanaka,Yoshio Saito","Excimer Laser 3D Machining Based on Irradiation Pulse Number Control","the 5th International Conference on Leading Edge Manufacturing in 21st Century (LEM21)","Proceedings of the 5th International Conference on Leading Edge Manufacturing in 21st Century (LEM21)","The Japan Society of Mechanical Engineers (JSME)",,"No. 09-207","pp. 581-584",2009,Dec.
"Yusuke Narabu,Zuanshi Haranud,Jiang Zhu,Tomohisa Tanaka,Yoshio Saito","Optimal Tool-path Selection for Milling Free-form Surface Based on the Form of Surface","3rd International Conference of Asian Society for Precision Engineering and Nanotechnology","Proceeding of 3rd International Conference of Asian Society for Precision Engineering and Nanotechnology",,,"  CD Proceeding","  1A1-13",2009,Nov.
"Masahiro Komori,Jiang Zhu,Tomohisa Tanaka,Yoshio Saito","Development of Work Table System with 6-DOF Parallel Mechanism for Machine Tools","3rd International Conference of Asian Society for Precision Engineering and Nanotechnology","Proceeding of 3rd International Conference of Asian Society for Precision Engineering and Nanotechnology",,,"  CD Proceeding","  2A1-4",2009,Nov.
"武隈裕一,朱疆,田中智久,齋藤義夫","セラミックスのフルモールド成形法に関する研究","2009年度精密工学会秋季大会","2009年度精密工学会秋季大会学術講演会講演論文集","社団法人 精密工学会",,,"pp. 367-368",2009,Sept.
"小森正裕,齋藤 義夫,田中 智久,朱 疆","工作機械に適した6軸パラレルメカニズムを用いたワークテーブルの開発","2009年度砥粒加工学会学術講演会","2009年度砥粒加工学会学術講演会講演論文集","社団法人 砥粒加工学会",,,"pp. 167‐168",2009,Sept.
"Xiaoyi Wang,Jiang Zhu,Tomohisa Tanaka,Yoshio Saito","A New Assembly Model Capable of Reorganizing Assembly Structure","Autumn Annual Meeting of the Japan Society for Procession Engineering 2009","Proceeding of Autumn Annual Meeting of the Japan Society for Procession Engineering 2009","The Japan Society for Procession Engineering",,,"pp. 523‐524",2009,Sept.
"奈良部優介,ﾊﾗﾉﾄﾞｼﾞｮﾝｼ,朱疆,田中智久,齋藤義夫","自由曲面ミル加工のための形状に基づくパス選択","日本機械学会2009年度年次大会","日本機械学会2009年度年次大会講演論文集","社団法人 日本機械学会","Vol. 4","No. 09-1","pp. 281-282",2009,Sept.
"鈴木純,朱疆,田中智久,齋藤義夫","作業区間をシェルに内包する小型工作機械","日本機械学会2009年度年次大会","日本機械学会2009年度年次大会講演論文集","社団法人 日本機械学会","Vol. 4","No. 09-1","pp. 233-234",2009,Sept.
"久保喬弘,朱疆,田中智久,齋藤義夫","粗さ面の真実接触部判定の高精度化に関する研究","2009年度精密工学会秋季大会","2009年度精密工学会秋季大会学術講演会講演論文集","社団法人 精密工学会",,,"pp. 733-734",2009,Sept.
"棚瀬雅貴,朱疆,田中智久,齋藤義夫","多軸ロボットシステムによる非接触三次元形状計測パスの生成方法","２００９年度精密工学会春季大会学術講演会","２００９年度精密工学会春季大会学術講演会講演論文集","精密工学会",,,"pp. 491-192",2009,Mar.
"鈴木 僚,朱 疆,田中 智久,齋藤 義夫","パルス数制御による高分子材料の自由曲面レーザアブレーション加工","２００９年度精密工学会春季大会学術講演会","２００９年度精密工学会春季大会学術講演会講演論文集","精密工学会",,,"pp. 931-932",2009,Mar.
"田辺龍太,朱疆,田中智久,齋藤義夫","極座標型デスクトップマシンツールによる３次元形状の加工と計測","２００９年度精密工学会春季大会学術講演会","２００９年度精密工学会春季大会学術講演会講演論文集","精密工学会",,,"pp. 519-520",2009,Mar.
"馮飛,朱疆,田中智久,齋藤義夫","多軸加工システムによる３Dモデルの加工に適用するツールパスの生成","日本機械学会生産システム部門研究発表講演会2009","日本機械学会生産システム部門研究発表講演会2009講演論文集","社団法人 日本機械学会",,"No. 09-5","pp. 19-20",2009,Mar.
"Ryuta Tanabe,Jiang Zhu,Tomohisa Tanaka,Yoshio Saito","Measurement and machining using polar coordiante desktop machine tool","the 13th International Machine Tool Engineers' Conference","Proceedings of the 13th International Machine Tool Engineers' Conference","Japan Machine Tool Builders' Association",,,"pp. 72-73",2008,Nov.
"Masataka Tanase,Jiang Zhu,Tomohisa Tanaka,Yoshio Saito","Freeform surface sculpturing and measurement system based on 8-axis robot system","the 13th International Machine Tool Engineers' Conference","Proceedings of the 13th International Machine Tool Engineers' Conference","Japan Machine Tool Builders' Association",,,"pp. 70-71",2008,Nov.
"朱 疆,ハラノド ジョンシ,田中 智久,齋藤 義夫","CG画像簡略化技術を利用した自由曲面特徴領域の抽出に関する研究","日本機械学会 第七回生産加工・工作機械部門講演会","日本機械学会 第七回生産加工・工作機械部門講演会講演論文集","日本機械学会",,"No. 08-19","pp. 263-264",2008,Nov.
"JIANG ZHU,TOMOHISA TANAKA,YOSHIO SAITO,Lining Sun","Study on the Virtual Reality Based Interface for Robot Integrated Machining and Manipulation","13th Internation Conference on Machine Design and Production","Proceeding of the 13th Internation Conference on Machine Design and Production",,,,"pp. 171-186",2008,Sept.
"田辺龍太,朱疆,田中智久,齋藤義夫","極座標型デスクトップマシンツールを用いた加工","２００８年度精密工学会秋季大会学術講演会","２００８年度精密工学会秋季大会学術講演会講演論文集","精密工学会",,,"pp. 137-138",2008,Sept.
"棚瀬雅貴,朱疆,田中智久,齋藤義夫","多軸ロボットシステムによる非接触三次元形状計測","２００８年度精密工学会秋季大会学術講演会","２００８年度精密工学会秋季大会学術講演会講演論文集","精密工学会",,,"pp. 241-242",2008,Sept.
"野村佳佑,朱 疆,田中 智久,齋藤 義夫","8軸加工システムの高機能化に関する研究","日本機械学会2008年度年次大会","日本機械学会2008年度年次大会講演論文集","日本機械学会","Vol. 4","No. 08-1","pp. 255-256",2008,Aug.
"JIANG ZHU,Ryo Suzuki,TOMOHISA TANAKA,YOSHIO SAITO","Automatic Tool Path Generation for Robot Integrated Surface Sculpturing System",,"Journal of Advanced Mechanical Design, Systems, and Manufacturing","The Japan Society of Mechanical Engineers","Vol. 2","No. 4","pp. 812-823",2008,Aug.
"ハラノド ジョンシ,朱 疆,田中 智久,齋藤 義夫","自由曲面加工に適した工具パスの生成方法","日本機械学会生産システム部門研究発表講演会2008","日本機械学会生産システム部門研究発表講演会2008講演論文集","日本機械学会",,"No. 08-13","pp. 59-60",2008,July
"朱 疆,田中 智久,齋藤 義夫","自由曲面加工に適した粗加工モデルの生成","日本機械学会生産システム部門研究発表講演会2008","日本機械学会生産システム部門研究発表講演会2008講演論文集","日本機械学会",,"No. 08-13","pp. 57-58",2008,July
"Ryo Suzuki,Jiang Zhu,Tomohisa Tanaka,Yoshio Saito","8-axis Surface Sculpturing System by Heated Cutting Tools","ICCES’08(International Conference on Computational & Experimental Engineering and Science)","Proceeding of ICCES’08(International Conference on Computational & Experimental Engineering and Science)",,,,"pp. 1484-1484",2008,Mar.
"Jiang Zhu,Ryo Suzuki,Tomohisa Tanaka,Yoshio Saito","Automatic Tool Path Generation for Robot Integrated Surface Sculpturing System","The 4th International Conference on Leading Edge Manufacturing in 21st Century, LEM21","Proceeding of The 4th International Conference on Leading Edge Manufacturing in 21st Century, LEM21",,,,"pp. 125-130",2007,Nov.
"Jiang Zhu,Tomohisa Tanaka,Yoshio Saito","A 3D rough-cut model generation algorithm based on multi-resolution mesh for sculptured surface machining",,"Journal of Advanced Mechanical Design, Systems, and Manufacturing",,"Vol. 1","No. 5","pp. 628-639",2007,Nov.
"Jiang Zhu","Research on multi-resolution mesh and its application in freeform surface machining",,,,,,,2007,Sept.
"ZhuJiang","多分解能メッシュとその自由曲面加工への適用に関する研究",,,,,,,2007,Sept.
"Jiang Zhu,Ryo Suzuki,Tomohisa Tanaka,Yoshio Saito","A Surface Sculpturing System Based on 8-Axis Robot","International Conference on Advanced Design & Manufacturing, ICADM-2007","Proceeding of International Conference on Advanced Design & Manufacturing, ICADM-2007",,,,"pp. 421-427",2007,Aug.
"Jiang Zhu,Nafis Ahamad,Hideichi Nakamoto,Noboto Matsuhira","Developing the map building ability for home robot ApriAttendaTM","3rd Tokyo Tech-KAIST Joint Workshop for Mechanical Engineering Students in Tokyo","Proceeding of 3rd Tokyo Tech-KAIST Joint Workshop for Mechanical Engineering Students in Tokyo",,,,"pp. 101-102",2007,Feb.
"Jiang Zhu,Tomohisa Tanaka,Yoshio Saito","Multi-resolution mesh for sculptured surface machining",,"Journal of Solid Mechanics and Materials Engineering",,"Vol. 1","No. 1","pp. 69-80",2007,Jan.
"Jiang Zhu,Nafis Ahamad,Hideichi Nakamoto,Noboto Matsuhira","Feature map building based on shape similarity for home robot ApriAttendaTM","IEEE International Conference on Robotics and Biomimetics (ROBIO2006)","Proceeding of IEEE International Conference on Robotics and Biomimetics (ROBIO2006)",,,,"pp. 1030-1035",2006,Dec.
"Jiang Zhu,Tomohisa Tanaka,Yoshio Saito","8-axis robot integrated surface sculpturing system","New Technologies of Machine Tool and Manufacturing, Joint Event of the 12th International Machine Tool Engineers Conference","New Technologies of Machine Tool and Manufacturing, Joint Event of the 12th International Machine Tool Engineers Conference",,,,"pp. 40-41",2006,Nov.
"Nafis Ahamad,Jiang Zhu,Hideichi Nakamoto,Noboto Matsuhira","Self-localization of home robot ApriAttendaTM based on Monte Carlo approach","International Symposium on Practical Cognitive Agents & Robots",,,,,"pp. 212-220",2006,Nov.
"Jiang Zhu,Tomohisa Tanaka,Yoshio Saito","Rough machining process and its simulation for robot integraged surface sculpturing system","the 4th IASTED International Conference on Circuits, Signals, and Systems","Prpceeding of the 4th IASTED International Conference on Circuits, Signals, and Systems",,,,"pp. 368-373",2006,Nov.
"Jiang Zhu,Ryoko Tanaka,Tomohisa Tanaka,Yoshio Saito","An 8-axis robot based rough cutting system for surface sculpturing","11th International Conference on Precision Engineering (11th ICPE)","Towards Synthesis of Micro-/Nano-systems","Springer",,,"pp. 139-144",2006,Aug.
"Jiang Zhu,Nafis Ahamad,Hideichi Nakamoto,Noboto Matsuhira","Map building and localization of home robot using feature matching and montecarlo approach","2006 JSME Conference on Robotics and Mechatronics (ROBOMEC2006)",,,,,"  CD Proceeding",2006,May
"Jiang Zhu,Tomohisa Tanaka,Yoshio Saito","3D mesh simplification for freeform surfacing","Tehran International Congress on Manufacturing Engineering (TICME2005)",,,,,"  CD Proceeding",2005,Dec.
"L. N. Sun,F. S. Tan,W. B. Rong,Jiang Zhu","Collosion detection approach in virtual environment of micromanipulation robot",,"High Technology Letter",,"Vol. 11","No. 4","pp. 371-376",2005,Dec.
"Jiang Zhu,Tomohisa Tanaka,Yoshio Saito","A new mesh simplification algorithm for the application of surface sculpturing","The First JTU-TIT Joint Workshop on Creative Engineering-Mechanics, Control and Advanced Robotics","Proceeding of The First JTU-TIT Joint Workshop on Creative Engineering-Mechanics, Control and Advanced Robotics",,,,"  CD Proceeding",2005,Sept.
"L. N. Sun,F. S. Tan,W. B. Rong,Jiang Zhu","Modeling of micromanipulation robot in virtual environment",,"ACTA Metallurgica Sinca (English Letter)",,"Vol. 17","No. 2","pp. 194-198",2004,Apr.
"L. N. Sun,F. S. Tan,W. B. Rong,Jiang Zhu","A collision response method in virtual environment of peg-in-hole microassembly",,"Proceedings of the World Congress on Intelligent Control and Automation (WCICA)",,"Vol. 4",,"pp. 3210-3213",2004,
"L. N. Sun,F. S. Tan,W. B. Rong,Jiang Zhu","Research on the architecture of virtual reality based on micromanipulation robot","2003 IEEE International Conference on Robotics, Intelligent Systems and Signal Processing","Proceeding of 2003 IEEE International Conference on Robotics, Intelligent Systems and Signal Processing",,,,"pp. 960-964",2003,Oct.