"里 達雄,Than Trong  Long,手塚裕康,神尾彰彦,高橋恒夫","Al-Cu合金強制固溶体における周期構造の形成",,"日本金属学会誌",,"Vol. 49","No. 8","pp. 591-597",2014,
"Jung-Moo Lee,Suk-Bong Kang,Tatsuo Sato,Hiroyasu Tezuka,Akihiko Kamio","Dry Sliding Wear Behavior of A2218/Al3Fe Composites Fabricated by Plasma Synthesis Method",,"Materials Transacions",,"Vol. 43","No. 7","pp. 1638-1646",2002,July
"Kenichi Yaguchi,Hiroyasu Tezuka,Tatsuo Sato,Akihiko Kamio","Grain Refinement of Cast Al Alloys by Al-B Master Alloy",,"Materials Science Forum",,"Vol. 331-337",,"pp. 391-396",2000,
"Kenji Matsuda,Tokimasa Kawabata,Yasuhiro Uetani,Tatsuo Sato,Akihiko Kamio,Susumu Ikeno","HRTEM Observation of G.P. Zones and Metastable Phase in Al-Mg-Si Alloys",,"Materials Science Forum",,"Vol. 331-337",,"pp. 989-994",2000,
"黒木康徳,田中 徹,里 達雄,神尾彰彦","Al-Cu系合金鋳物の疲労特性に及ぼす溶湯清浄度の影響",,"鋳造工学",,"Vol. 71","No. 6","pp. 379-384",1999,June
"横田純一,廣澤渉一,里 達雄,神尾彰彦","Al-Li合金のδ'相析出に及ぼすCuおよびMg微量添加の影響の計算機シミュレーション",,"軽金属",,"Vol. 49","No. 2","pp. 51-56",1999,Feb.
"神尾彰彦","金属材料活用事典（編集，分担）",,"産業調査会","産業調査会",,,,1999,
"Mingyi Zheng,Kun Wu,Congkai Yao,Tatsuo Sato,Hiroyasu Tezuka,Akihiko Kamio,D.X.Li","Interfacial bond between SiCw and Mg in squeeze cast SiCw/Mg composites",,"Materials Letters",,"Vol. 41",,"pp. 57-62",1999,
"Kenji Matsuda,Tsutomu Naoi,Kaname Fujii,Yasuhiro Uetani,Tatsuo Sato,Akihiko Kamio,Susumu Ikeno","Crystal Structure of the β" Phase in an Al-1.0mass%Mg2Si-0.4mass%Si Alloy",,"Materials science and engineering A",,"Vol. 262",,"pp. 232-237",1999,
"松田健二,川畑常眞,直井 勉,上谷保裕,蓮覚寺聖一,里 達雄,神尾彰彦,池野 進","シリコンを過剰に含むAl-Mg-Si合金の二段時効における析出挙動",,"日本金属学会誌",,"Vol. 62","No. 9","pp. 827-833",1998,Sept.
"松田健二,吉田朋夫,和田智美,吉田 愛,上谷保裕,里 達雄,神尾彰彦,池野 進","過剰にマグネシウムを含むAl-Mg-Si合金の析出過程",,"日本金属学会誌",,"Vol. 62","No. 8","pp. 718-726",1998,Aug.
"藤原英道,里 達雄,神尾彰彦,大瀧光弘","析出相結晶構造に基づく銅合金設計",,"伸銅技術研究会誌",,"Vol. 37",,"pp. 106-115",1998,Aug.
"鄭  秉準,里 達雄,手塚裕康,神尾彰彦,才川清二,中井清之","半溶融凝固法により製造したAl-7%Si-0.5%Mg合金の微細組織と機械的性質",,"軽金属",,"Vol. 48","No. 7","pp. 329-334",1998,July
"藤原英道,里 達雄,神尾彰彦","Cu-Ni-Si系合金中の析出挙動に及ぼす合金組成の影響",,"日本金属学会誌",,"Vol. 62","No. 4","pp. 301-309",1998,Apr.
"松田健二,吉田朋夫,蒲田裕志,藤井 要,上谷保裕,里 達雄,神尾彰彦,池野 進","二段時効したAl-1.6%Mg2Si合金の析出組織の高分解能透過型電顕観察",,"日本金属学会誌",,"Vol. 62","No. 2","pp. 133-139",1998,Feb.
"Shoichi Hirosawa,Tatsuo Sato,Junichi Yokota,Akihiko Kamio","Comparison Between Resistivity Changes and Monte Carlo Simulation for GP Zone Formation in Al-Cu Base Ternary Alloys",,"Materials Transactions, JIM",,"Vol. 39","No. 1","pp. 139-146",1998,Jan.
"AKIHIKO KAMIO","Ignition prevention of magnesium by simultaneous addition of calcium and zirconium",,"International Journal of Cast Metals Research",,"Vol. 10",,"pp. 345-351",1998,
"田原和典,鄭  秉準,手塚裕康,里 達雄,神尾彰彦","結晶微細化した亜共晶Al-Si-Cu合金の半溶融加圧鋳造組織と機械的性質",,"軽金属",,"Vol. 47","No. 11","pp. 620-625",1997,Nov.
"里 達雄,植田菜摘,神尾彰彦","Cu-Ni-Sn合金の変調構造および不連続析出に及ぼすMn添加の影響",,"伸銅技術研究会誌",,"Vol. 36",,"pp. 65-74",1997,Aug.
"松田健二,蒲田裕志,藤井 要,吉田朋夫,里 達雄,神尾彰彦,池野 進","Al-Mg2Si系合金における準安定相の高分解能電子顕微鏡観察",,"軽金属",,"Vol. 47","No. 8","pp. 493-499",1997,Aug.
"R.M.Gomes,TATSUO SATO,AKIHIKO KAMIO","Microstructures and coarsening behavior of silicon particles in P/M Al-Si-Cu-Mg alloys containing Fe and Ni",,"Journal of Japan Light Metalls",,"Vol. 47","No. 2","pp. 90-97",1997,Feb.
"AKIHIKO KAMIO","Semi-solid solidification structure and mechanical properties of grain-refined hypoeutectic Al-Si-Cu alloy",,"Journal of Japan Light Metals",,"Vol. 47","No. 11","pp. 620-625",1997,
"AKIHIKO KAMIO","Semi-solid solidification microstructure of a strain-induced Al-7% Si-0.5% Mg alloy",,"Journal of Japan Light Metals",,"Vol. 47","No. 11","pp. 626-631",1997,
"AKIHIKO KAMIO","Mechanical Properties and Fracture Process of SiCw/Mg Composites Produced by Squeeze Casting and Extrusion",,"Mater. Trans. of JIM",,"Vol. 38","No. 1","pp. 18-27",1997,
"Shoichi HIROSAWA,Tatsuo SATO,Akihiko KAMIO,Kazuhiro KOBAYASHI,Toshimasa SAKAMOTO","Effects of additional elements and quenching conditions on the T1 phase precipitation in Al-1.3%Li-5.5%Cu-0.13%Zr Alloys (Translation)",,"Light Metals Review",,"Vol. 4",,"pp. 14-20",1997,
"洪 性吉,崔 政?,林 徳仲,手塚裕康,里 達雄,神尾彰彦","SiCウィスカ強化Al-CuおよびAl-Cu-Mg合金基複合材料の時効硬化挙動",,"日本金属学会誌",,"Vol. 60","No. 6","pp. 569-576",1996,June
"張 茂勲,陳 暁,銭 匡武,洪 性吉,手塚裕康,里 達雄,神尾彰彦","Al2O3-SiO2繊維強化アルミニウム合金複合材料の組織及び機械的性質",,"鋳造工学",,"Vol. 68","No. 5","pp. 411-416",1996,May
"廣澤渉一,里 達雄,神尾彰彦,小林一徳,坂本敏正","Al-1.3%Li-5.5%Cu-0.13%Zr系合金におけるT1相の粒内析出に及ぼす微量添加元素および焼入れ条件の影響",,"軽金属",,"Vol. 46","No. 3","pp. 119-125",1996,Mar.
"AKIHIKO KAMIO","Analysis of Thermal residual Stresses in Unidirectionally Aligned SiCw/Al-Alloy Matrix Composites by X-Ray Diffraction",,"Materials Transactions,JIM",,"Vol. 37","No. 3","pp. 230-238",1996,
"AKIHIKO KAMIO","Mechanism of Macro-Segregation Formation in Sic Whisker Reinforced Aluminum Alloys Composites Fabricated by Squeeze Casting",,"Journal of Japan Institute of Metals",,"Vol. 60","No. 2","pp. 218-224",1996,
"AKIHIKO KAMIO","Effect of Thermal Residual Stress on Mechanical Properties of SiC Whisker Reinforced Al-Mg and Al-Li Alloys Composites",,"Materials Transactions,JIM",,"Vol. 37","No. 5","pp. 975-982",1996,
"AKIHIKO KAMIO","Precipitation Strengthening and Mechanical Properties of Hypereutectic P/M Al-Si-Cu-Mg Alloys Containing Fe and Ni",,"Proc. of the 5th International Conference on Aluminum Alloys",,,,"pp. 789-794",1996,
"Kenji Matsuda,Shizuo Tada,Susumu Ikeno,Tatsuo Sato,Akihiko Kamio","CRYSTAL SYSTEM OF ROD-SHAPED PRECIPITATES IN AN Al-1.0mass%Mg2Si-0.4mass%Si ALLOY",,"Scripta Met.. Mater.",,"Vol. 32","No. 8","pp. 1175-1180",1995,Aug.
"藤原英道,里 達雄,神尾彰彦","Cu-1 mass%Fe合金の析出挙動に及ぼすりん微量添加の影響",,"日本金属学会誌",,"Vol. 59","No. 5","pp. 502-511",1995,May
"神尾彰彦","新版非鉄金属材料の選択のポイント（編集，分担）",,"日本規格協会","日本規格協会",,,,1995,
"細田秀樹,里 達雄,手塚裕康,三島良直,井上漢龍,神尾彰彦,篠田哲守","遷移金属トリアルミナイドAl3Nbの欠陥構造と添加元素置換サイトの擬基底状態解析による計算",,"軽金属",,"Vol. 44","No. 11","pp. 675-681",1994,Nov.
"細田秀樹,里 達雄,手塚裕康,三島良直,神尾彰彦","Al-Li合金中のL12型Al3Li準安定相における添加元素置換挙動",,"日本金属学会誌",,"Vol. 58","No. 8","pp. 865-871",1994,Aug.
"AKIHIKO KAMIO","Effect of Thermal Stress on Mechanical Properties of SiCw Reinforced Al Matrix Composites",,"Proc. of 4th Int. Conf. on Aluminum Alloys",,"Vol. 4","No. 2","pp. 698-705",1994,
"AKIHIKO KAMIO","Influence of Peritectic Elements on Microsegregation, Homogenization and Precipitation in Cast Aluminum Alloy",,"Proc. of 4th Int. Conf. on Aluminum Alloys",,"Vol. 4","No. 1","pp. 652-659",1994,
"AKIHIKO KAMIO","Formation of Solidification Structure and Solid-Liquid Interfacial Morphology in Monotectic Solidification",,"Journal of Japan Society for Heat Treatment",,"Vol. 34","No. 4","pp. 198-202",1994,
"AKIHIKO KAMIO","Formation of Microstructure in Stirecast Zn-22%Al Alloy",,"Journal of Japan Foundrymen's Society",,"Vol. 65","No. 8","pp. 621-626",1993,
"AKIHIKO KAMIO","New Age in Aluminum Materials",,"Kogyo chosa kai Co. Ltd.","Kogyo chosa kai Co. Ltd.",,,,1993,
"AKIHIKO KAMIO","Development of ceramic mold for Al-Li alloy castings",,"Journal of Japan Light Metals",,"Vol. 43","No. 11","pp. 630-635",1993,
"AKIHIKO KAMIO","Age hardening behavior in SiCw/Al-Li-Cu alloy Composites",,"Journal of Japan Light Metals",,"Vol. 43","No. 6","pp. 328-334",1993,
"里 達雄,高橋 功,手塚裕康,神尾彰彦","Mg-Y合金の時効析出組織",,"軽金属",,"Vol. 42","No. 11","pp. 804-809",1992,Nov.
"神尾彰彦,村上 雄,里 達雄,中村 桂","Cu-Ni-Ti-Sn合金の時効析出挙動",,"伸銅技術研究会誌",,"Vol. 31",,"pp. 128-134",1992,Aug.
"小林一徳,大崎修平,神尾彰彦,里 達雄,辻 美紘","微量Znを添加したAl-Li系合金の耐食性",,"軽金属",,"Vol. 42","No. 4","pp. 211-216",1992,Apr.
"横田耕太郎,小松原俊雄,里 達雄,神尾彰彦","Al-Mg-Si系合金のセレーションに及ぼす熱処理条件とCu添加の影響",,"軽金属",,"Vol. 42","No. 3","pp. 149-154",1992,Mar.
"AKIHIKO KAMIO","Precipitation structure of Mg-Y alloys",,"Journal of Japan Light Metals",,"Vol. 42","No. 12","pp. 804-809",1992,
"AKIHIKO KAMIO","High Temperature Deformation Behavior in Rapidly Solidified Al-Fe Alloys",,"Proc. of 3rd Int. Conf. on Aluminum Alloys",,"Vol. 3","No. 1","pp. 117-122",1992,
"Tatsuo Sato,Akihiko Kamio","High Resolution Microscopy on the Ordered Phase in Al-Li Alloys",,"Aluminium-Lithium",,"Vol. 1",,"pp. 57-62",1992,
"Kazunori Kobayashi,Shuhei Ohsaki,Akihiko Kamio,Tatsuo Sato,Yoshihiro Tsuji","Effect of Zn Addition on Corrosion Resistance of 2090 and 2091 Alloys",,"Aluminium-Lithium",,"Vol. 2",,"pp. 673-678",1992,
"AKIHIKO KAMIO","Structure change and softening behavior of Al-8mass%Fe alloy extrudates prepared from rapidly solidified ribbons",,"Journal of Japan Light Metals",,"Vol. 42","No. 1","pp. 27-32",1992,
"Tatsuo Sato,Akihiko Kamio","Ordered Structures in the Early Stage of Decomposition in an Al-7.9at%Li alloy",,"Materials Transactions of Japan Institute of Metals",,"Vol. 31","No. 1","pp. 25-30",1990,Jan.
"神尾彰彦,手塚裕康,里  達雄,Than Trong Long,高橋恒夫","Al-Fe合金の急冷凝固組織と相分解",,"軽金属",,"Vol. 36","No. 2","pp. 72-80",1986,Feb.
"神尾彰彦,手塚裕康,里  達雄,Than Trong LONG,高橋恒夫","Al-Fe-Ce合金の急冷凝固組織と相分解",,"軽金属",,"Vol. 35","No. 8","pp. 439-446",1985,Aug.
"神尾彰彦,手塚裕康,里  達雄,Than Trong  Long,高橋恒夫","急冷凝固したAl-Cu合金の組織と相分解",,"軽金属",,"Vol. 35","No. 5","pp. 275-281",1985,May
"神尾彰彦","高鉛青銅の凝固に関する研究",,,,,,,1969,