"W.-G.Hahm,W. Takarada,H. Ito,T. Kikutani","On-line Measurement Studies on Orientation Development and Characrteristic Short-Period Diameter Fluctuation in High Speed In-line Drawing of Poly(ethylene terephthalate) Fiber",,"International Polymer Processing",,"Vol. 24","No. 3","pp. 280-287",2009,July
"Hiroshi Ito,Hajime Suzuki,Kunihiko kazama,Takeshi Kikutani","Polymer Structure and properties in micro- and nanomolding process",,"Current Applied Physics","Elsevier","Vol. 9",,"pp. e19-e24",2009,June
"郡洋平,宝田亘,伊藤浩志,武部智明,南裕,金井俊孝,鞠谷雄士","ポリプロピレンの高速溶融紡糸における低立体規則性成分ブレンドの効果",,"成形加工","プラスチック成型加工学会","Vol. 20","No. 11","pp. 831-839",2008,Nov.
"Y. Kohri,W. Takarada,H. Ito,T. Kikutani,T. Takebe,H. Minami,T. Kanai","Effect of the Blending of Low Stereoregularity Component on Spinnability and Fiber Property Development in High-speed Melt Spinning of Polypropylene","Polymer Processing Society American Regional Meeting",,,,,,2008,Oct.
"Q. Yuan,W. Takarada,H. Ito,T. Kikutani","Effect of Laser-Irradiation Heating in Melt Spinning Process of Polyoxymethylene on Structure and Properties of Resultant Fibers","Polymer Processing Society American Regional Meeting",,,,,,2008,Oct.
"齊藤卓志,井手慎之介,伊藤浩志,安原鋭幸,川口達也,佐藤勲","ポリプロピレン薄肉射出成形品のウェルドに関する研究",,"成形加工",,"Vol. 20","No. 10","pp. 776-780",2008,Sept.
"X. Shi,Y. Kohri,M. Kitayama,W. Takarada,H. Ito,T. T.Kikutani","Melt Spinning of Elastomeric Fibers","Asian Workshop on Polymer Processing","Book of Extended Abstracts, Asian Workshop on Polymer Processing",,,,"pp. 21-22",2008,Aug.
"Qi Yuan,Wataru Takarada,Hiroshi Ito,Takeshi Kikutani","Effect of Laser-irradiation Heating in Melt Spinning Process of Polyoxymethylene","Polymer Fibers 2008",,,,,,2008,July
"M.Kitayama,W.Takarada,H.Ito,T.Kikutani","Fiber Structure Development in Melt Spinning of Polyether-ester Elastomer","Polymer Fibres 2008",,,,,,2008,July
"池田佳祐,宝田亘,鞠谷雄士,伊藤浩志","環状オレフィンコポリマーフィルムの二軸伸長過程における複屈折変化","平成２０年度繊維学会年次大会","繊維学会予稿集2008",,"Vol. 63","No. 1 and 2","pp. 97",2008,June
"M.Kitayama,W.Takarada,H.Ito,T.Kikutani","Mechanism of Fiber Formation in Melt Spinning of Polyester ether Elastomer","Polymer Processing Society 24th Annual Meeting",,,,,,2008,June
"H.Ito,H. Suzuki,K. Kazama,T.Kikutani","Structure Development and Replication Properties of Micromolded Plastics Parts in Injection Compression Molding","Polymer Processing Society 24th Annual Meeting",,,,,,2008,June
"郡洋平,宝田亘,鞠谷雄士,伊藤浩志,武部智明,南裕,金井俊孝","ポリプロピレンの溶融紡糸における低立体規則性成分添加効果 ?立体規則性，分子量依存性?","平成２０年度繊維学会年次大会","繊維学会予稿集2008",,"Vol. 63","No. 1 and 2","pp. 92",2008,June
"H.Ito,K.Kazama,T.Kikutani","Effects of Process Conditions on Surface Replication and Higher-Order Structure Formation in Micromolding",,"Macromol. Symp.","Wiley Inter Science","Vol. 249-250",,"pp. 628-634",2008,May
"戚 媛,伊藤浩志,宝田亘,鞠谷雄士","ポリオキシメチレンの溶融紡糸における紡糸線のレーザー加熱による繊維物性の改良","日本繊維機械学会第６１回年次大会",,,,,,2008,May
"内田裕太,塩谷朋之,宝田亘,伊藤浩志,鞠谷雄士","極微小エアーギャップ溶融紡糸における紡糸過程の安定化と繊維構造形成","第５７回高分子学会年次大会",,,,,,2008,May
"K. H. Kim,H. H. Cho,H.Ito,T.Kikutani","Fiber Structure Development in High-Speed Melt Spinning of Poly(trimethylene terephthalate) (PTT) - On-line Measurement of Birefringence ?",,"Journal of Polymer Science, Part B, Polym. Physics","Wiley Interscience","Vol. 46","No. 9","pp. 847-856",2008,Mar.
"志熊治雄,久保直人,山本昌幸,風間邦彦,伊藤浩志,鞠谷雄士,大嶋 正裕","ガス含浸光学ポリマーの熱処理による転写性と構造発現への影響","第１５回 プラスチック成形加工学会秋季大会","成形加工シンポジア’０７","（社）プラスチック成形加工学会",,,"pp. 87",2007,Nov.
"伊藤浩志,風間邦彦,鞠谷","マイクロ射出成形におけるマイクロ成形体の転写性と構造形成","第１５回 プラスチック成形加工学会秋季大会","成形加工シンポジア’０７","（社）プラスチック成形加工学会",,,"pp. 89",2007,Nov.
"郡洋平,伊藤浩志,鞠谷,武部智明,南裕,金井俊孝","高立体規則性PPの高速溶融紡糸における分子量の異なる低立体規則性PPの添加効果","第１５回 プラスチック成形加工学会秋季大会","成形加工シンポジア’０７","（社）プラスチック成形加工学会",,,"pp. 217",2007,Nov.
"Tomoyuki Enya,Hiroshi Ito,TAKESHI KIKUTANI","Melt spinning of poly(ethylene terephthalate) using water-quenching bath placed at extremely short air-gap length","The Fiber Society Fall Annual Meeting and Technical Conference","The Fiber Society Fall Annual Meeting and Technical Conference","The Fiber Society",,,,2007,Oct.
"塩谷 朋之,伊藤 浩志,鞠谷 雄士","Water-quenching Melt Spinning of Poly(ethylene terephthalate) with Extraordinary Short Air Gap",,,,,,,2007,Oct.
"北山雅哉,伊藤浩志,鞠谷","ポリエステル系熱可塑性エラストマーの溶融紡糸と繊維構造形成","繊維学会秋季研究発表会","繊維学会予稿集２００７","（社）繊維学会","Vol. 62","No. 3","pp. 7",2007,Oct.
"塩谷朋之,伊藤浩志,鞠谷","極微小エアギャップ水冷紡糸により作製したポリエチレンテレフタレート繊維の構造と物性","繊維学会秋季研究発表会","繊維学会予稿集２００７","（社）繊維学会","Vol. 62","No. 3","pp. 6",2007,Oct.
"M.Kitayama,H.Ito,T.Kikutani","Crystallization of Polyester Elastomer under Tensile Stress","International Symposium on Polymer Crystallization",,,,,,2007,Sept.
"Yasutaka Kato,Hiroshi Ito,Takeshi Kikutani","Fundamental Study on Fabrication of Graded Index Optical Fiber Utilizing Diffusion of Low Molar Mass Additive in Bicomponent Spinning Procfess","36th Textile Research Symposium at Mt. Fuji","Proceedings of the 36th Textile Research Symposium at Mt.Fuji","Textile Machinery society of Japan",,,"p. 1-6",2007,Aug.
"H.Ito,T.Kikutani","Fiber Structure Development in Melt Spinning of Thermoplastic Poly(vinyl alcohol)","Polymer Processing Society Asia/Australia Meeting,",,,,,,2007,July
"YUAN QI,Hiroshi Ito,TAKESHI KIKUTANI","Effect of Laser-irradiation Heating in Melt Spinning Process on Structure and Properties of As-spun and Drawn Fibers","平成１９年度 繊維学会年次大会","Fiber Preprints",,"Vol. 62","No. 1","pp. 93",2007,June
"池田,伊藤,鞠谷","環状オレフィンコポリマーフィルムの一軸・二軸伸長過程における応力・複屈折のオンライン計測","第１８回成形加工学会年次大会","成形加工’０７","プラスチック成形加工学会",,,"pp. 283",2007,June
"伊藤,風間,鞠谷","様々なマイクロ成形における高次構造形成","第１８回成形加工学会年次大会","成形加工’０７","プラスチック成形加工学会",,,"pp. 209",2007,June
"志熊治雄,久保直人,山本昌幸,風間邦彦,伊藤浩志,鞠谷雄士,大嶋 正裕","ガス含浸ポリカーボネートの可塑化効果による転写性と構造発現への影響","第１８回成形加工学会年次大会","成形加工’０７","プラスチック成形加工学会",,,"pp. 219",2007,June
"更田誠,小林由佳,山田和志,Y.W.Leong,小滝 雅也,濱田 泰以,吉永 耕二,辛川弘行,伊藤,風間,鞠谷","DMA荷重法によるシリカ充填PMMA複合材料の物性","第１８回成形加工学会年次大会","成形加工’０７","プラスチック成形加工学会",,,"pp. 251",2007,June
"加藤泰崇,伊藤,鞠谷","低分子物質を混合したポリメチルメタクリレートの複合溶融紡糸における屈折率分布形成に及ぼす成形条件依存性","第１８回成形加工学会年次大会","成形加工’０７","プラスチック成形加工学会",,,"pp. 275",2007,June
"山本清志,河原 豊,伊藤浩志,鞠谷","再生原料との複合化によるポリエステル繊維のオリゴマー溶出抑制","平成１９年度 繊維学会年次大会","繊維学会予稿集",,"Vol. 62","No. 1","pp. 94",2007,June
"Senglin yang,Hiroshi Ito,Takeshi Kikutani,Shinichi Nakai","Experimental and numerical analysis on the tentering process of PET film","平成１９年度 繊維学会年次大会","Fiber Preprints",,"Vol. 62","No. 1","pp. 96",2007,June
"Hiroshi Ito,kunihiko kazama,TAKESHI KIKUTANI","Effects of Process Conditions on Surface Replication and Higher-order Structure formation in micromolding",,"Macromolecular Symposia",,"Vol. 249&250",,"pp. 628-634",2007,May
"Hiroshi Ito,kunihiko kazama,TAKESHI KIKUTANI","Surface properties and internal structure of micro/nano molded plastics for application to optical deveices","The Polymer Processing Society 23rd Annual Meeting","The Polymer Processing Society 23rd Annual Meeting","The Polymer Processing Society","Vol. CD-R",,,2007,May
"H.Ito,K.Kazama,T.Kikutani","Structure/Properties Relationship of Molded Parts in Micro/Nano Molding","International Symposium on Advanced Materials Forming Technologies, The 5th International Conference on Materials, Processing for Properties and Performance","Proceedings of Materials Processing for Properties and Performance (MP3), CDROM",,,,"pp. 196-198",2006,Dec.
"W.G.Hahm,H.Ito,T.Kikutani","Analysis of Necking Deformation Behavior High-Speed In-line Drawing Process of PET by On-Line Diameter and Velocity Measurements",,"International Polymer Processing",,"Vol. XXI","No. 5","pp. 536-543",2006,Dec.
"K.Kazama,H.Ito,T.Kikutani","Thermal Properties and Structure of Injection Molded Thin-wall Products of PP/Boron Nitride Composites","International Symposium on Advanced Materials Forming Technologies, The 5th International Conference on Materials, Processing for Properties and Performance","Proceedings for Materials Processing for Properties and Performance (MP3), CDROM",,"Vol. 5",,"pp. 199-201",2006,Dec.
"Y.Kobayashi,H.Hamada,K.Yamada,Y.W.Leong,M.Kotaki,K.Yoshinaga,H.Karakawa,H.Ito,K.Kazama,T.Kikutani","Effects of Interfacial Adhesion on Mechanical Properties of Silica/PMMA Composites","Asian Workshop on Polymer Processing in Thailand 2006","Proceeding of the Asian Workshop on Polymer Processing in Thailand 2006",,,,"pp. 226-229",2006,Dec.
"H.Ito,K.Kazama,T.Saito,T.Yasuhara,T.Kikutani,T.Takaoka,S.Kawai","Surface Replication Property and Higher-order Structure Development of Molded Parts with Ultrastructural Patterns Prepared by Micro/Nanomolding","Asian Workshop on Polymer Processing in Thailand 2006","Proceeding of the Asian Workshop on Polymer Processing in Thailand 2006",,,,"pp. 115-118",2006,Dec.
"H.Ito,K.Kazama,T.Kikutani","Thermal Properties and Structure of Injection Molded Thin-wall Products of PP/Boron Nitride Composites","Asian Workshop on Polymer Processing in Thailand 2006","Proceeding of the Asian Workshop on Polymer Processing in Thailand 2006",,,,"pp. 102-105",2006,Dec.
"伊藤浩志,鞠谷雄士","コンバーテック・テクノロジー便覧, 第四編　コンバーテックにおける分析・評価　光学フィルムの分子配向評価",,,"加工技術研究会",,,"pp. 462-468",2006,Dec.
"伊藤浩志,風間邦彦,鞠谷雄士","マイクロ・ナノ複合材料のマイクロ成形における高次構造とモルフォロジー変化","第18回　高分子加工技術討論会","第18回　高分子加工技術討論会　予稿集CDROM",,,,"pp. 14（CDROM）",2006,Nov.
"伊藤浩志,風間邦彦,鞠谷雄士","光学素子をターゲットとするマイクロ・ナノ成形加工品の表面特性と内部高次構造","第14回SPE　Japan　RETEC　講演発表会","SPE日本支部　第14回SPE-Japan　RETEC講演発表会テクニカルペーパー",,,,"pp. 58-61",2006,Oct.
"Y.Yagisawa,H.Ito,T.Kikutani","Simultaneous Measurements of Stress and Birefringence Development during Extensional Deformation of Cyclic Olefin Copolymer","IUPAC International Symposium on Advanced Polymers for Emerging Technologies, Commemorating the 30th Anniversary of The Polymer Society of Korea","Proceedings 2006 PSK Annual Fall Scientific Meetings, IUPAC-PSK30",,,,"pp. 3B4-OR-146 (CDROM)",2006,Oct.
"伊藤浩志","PPS-22レポート，マイクロ成形・精密加工，モルフォロジー・構造形成，押出成形セッション",,,"プラスチックエージ","Vol. 52","No. 10","pp. 70-81",2006,Oct.
"H.Ito,K.Kazama,T.Kikutani","Relationship between Replication and Structure of Mico/nano Molded Parts","IUPAC International Symposium on Advanced Polymers for Emerging Technologies, Commemorating the 30th Anniversary of The Polymer Society of Korea","Proceedings 2006 PSK Annual Fall Scientific Meetings, IUPAC-PSK30",,,,"pp. 3B4-OR-153 (CDROM)",2006,Oct.
"伊藤浩志","マイクロ成形加工の現状と研究動向",,,"成形加工","Vol. 18","No. 10","pp. 698-704",2006,Oct.
"加藤泰崇,伊藤浩志,鞠谷雄士","芯鞘型複合繊維の溶融紡糸過程における低分子物質の拡散による繊維断面内屈折率分布形成","平成18年度繊維学会　秋季研究発表会","繊維学会予稿集2006",,"Vol. 61","No. 3","pp. 17",2006,Sept.
"郡洋平,伊藤浩志,鞠谷雄士,金井俊孝,武部智明,南裕","ポリプロピレンの溶融紡糸における成形性と繊維構造形成に及ぼす低立体規則性成分ブレンドの効果","平成18年度繊維学会 秋季研究発表会","繊維学会予稿集2006",,"Vol. 61","No. 3","pp. 16",2006,Sept.
"田中茂雄,大久保健児,伊藤浩志","金属粉末射出成形法における樹脂流動に関する研究（２）?MIM材料特性と成形性の関係?",,"成形加工",,"Vol. 18","No. 9","pp. 689-694",2006,Sept.
"伊藤浩志","光学フィルムの評価・検査方法 光学フィルム　最新動向　?要求物性と製造・評価技術?",,,"情報機構",,,"pp. 229-241",2006,Sept.
"伊藤浩志","インテリジェントマイクロ成形支援システムによる材料評価とマイクロ成形品の構造形成機構","第12回成形加工夏季セミナー","プラスチック成形加工学会　第12回成形加工夏季セミナー要旨",,,,"pp. 20-23",2006,Aug.
"K.Kazama,H.Ito,T.Yasuhara,T.Saito,T.Kikutani","Strucutre and Properties of Thin-wall Molded Products with Micro Surface Features","22nd Annual Meeting of The Polymer Processing Society","Conference Proceedings of 22nd Annual Meeting of The Polymer Processing Society",,,,"pp. SP6-10 (CDROM)",2006,July
"Y.Kato,H.Ito,T.Kikutani","Diffusion of Low Molar Mass Additive during Bicomponent Melt Spinning Process for Continuous Fabrication of Graded-Index Plastic Optical Fibers","22nd Annual Meeting of The Polymer Processing Society","Conference Proceedings of 22nd Annual Meeting of The Polymer Processing Society",,,,"pp. G05-P23 (CDROM)",2006,July
"T.Enya,H.Ito,T.Kikutani","Effects of Extremely Short Air-gap Length on the Stabilization of Draw Resonance Behavior in Water-quenching Melt Spinning of Poly(ethylene terephthalate)","22nd Annual Meeting of The Polymer Processing Society","Conference Proceedings of 22nd Annual Meeting of The Polymer Processing Society",,,,"pp. G05-P22 (CDROM)",2006,July
"W.G.Hahm,H.Ito,T.Kikutani","Structure Evolution and Property of Poly(ethylene terephthalate) Filaments Prepared via High-speed In-line Drawing","22nd Annual Meeting of The Polymer Processing Society","Conference Proceedings of 22nd Annual Meeting of The Polymer Processing Society",,,,"pp. G05-12 (CDROM)",2006,July
"K.Yoshinaga,H.Karakawa,H.Ito,K.Kazama,T.Kikutani,W.Mihara,A.Nakai,M.Kotaki,H.Hamada","Effects of Processsing Parameter and Interfacial Adhesion on Mechanical Properties of Silica/PMMA Composites","22nd Annual Meeting of The Polymer Processing Society","Conference Proceedings of 22nd Annual Meeting of The Polymer Processing Society",,,,"pp. G03-P23 (CDROM)",2006,July
"K.Okubo,S.Tanaka,H.Ito","Effect of Metal Particle Distribution on Dimensional Accuracy of Micro-MIM Components","22nd Annual Meeting of The Polymer Processing Society","Conference Proceedings of 22nd Annual Meeting of The Polymer Processing Society",,,,"pp. SP6-07 (CDROM)",2006,July
"E.Kunimoto,H.Kobayashi,H.Ito,K.Kazama,T.Kikutani","Processability and Optical Property of Thin-wall Injection Molded Parts with Micro Prism Surface","22nd Annual Meeting of The Polymer Processing Society","Conference Proceedings of 22nd Annual Meeting of The Polymer Processing Society",,,,"pp. SP6-08 (CDROM)",2006,July
"H.Ito,K.Kazama,T.Kikutani,K.Okubo,S.Tanaka","Strucutre and Properties of Microscale Disk in Ultra Precision Injection Molding","22nd Annual Meeting of The Polymer Processing Society","Conference Proceedings of 22nd Annual Meeting of The Polymer Processing Society",,,,"pp. SP6-06 (CDROM)",2006,July
"T.Saito,A.Tajiri,H.Ito,T.Yasuhara,T.Kawaguchi,I.Satoh","Fundamental Study on Polymer Materials Temperature Measurement and Its Application to Precise Process Monitoring","22nd Annual Meeting of The Polymer Processing Society","Conference Proceedings of 22nd Annual Meeting of The Polymer Processing Society",,,,"pp. SP6-P02 (CDROM)",2006,July
"T.Yasuhara,Y.Araki,H.Aihara,H.Ito,T.Saito,N.Ohtake","Influence of Fiber Orientation on Mechanical Properties in Thin-wall Injection Molding of CNF/PP Composites","22nd Annual Meeting of The Polymer Processing Society","Conference Proceedings of 22nd Annual Meeting of The Polymer Processing Society",,,,"pp. SP6-12 (CDROM)",2006,July
"伊藤浩志,齊藤卓志,安原鋭幸","高分子マイクロ・ナノモールディング","06-1　高分子ナノテクノロジー研究会　講演会","高分子学会　06-1高分子ナノテクノロジー研究会　講演会要旨",,,,"pp. 17-20",2006,June
"鞠谷雄士,伊藤浩志","高分子レオロジーと成形加工CAEの基礎 ?マクロスコピック系のCAE：溶融紡糸の基礎と応用?",,,"成形加工","Vol. 18","No. 2","pp. 123-130",2006,Feb.
"伊藤浩志,斉藤卓志,安原鋭幸","若手研究者が抱く産学官連携の将来像と夢",,"成形加工",,"Vol. 18","No. 1","pp. 24-26",2006,Jan.
"伊藤浩志,風間邦彦,鞠谷雄士,國本栄起,小林博行","マイクロプリズム射出成形品の転写性と高次構造形成","第55回高分子学会年次大会","第55回高分子学会年次大会予稿集",,,,"pp. 2363",2006,
"斉藤卓志,田尻篤史,伊藤浩志,安原鋭幸,佐藤勲,川口達也","接触界面温度測定によるプロセスモニタリングの可能性","プラスチック成形加工学会　第17回年次大会","成形加工’06",,,,"pp. 277-278",2006,
"伊藤浩志,風間邦彦,鞠谷雄士,大久保健児,田中茂雄","超微細成形におけるマイクロディスクの成形性と高次構造 （第二報　結晶性材料成形品の内部構造解析）","プラスチック成形加工学会　第17回年次大会","成形加工’06",,,,"pp. 11-12",2006,
"風間邦彦,伊藤浩志,鞠谷雄士,森川淳子,橋本寿正","窒化ホウ素/高分子複合材料による薄肉成形品の構造・物性","第14回複合材料界面科学シンポジウム","最新の複合材料界面科学研究2006",,,,"pp. O-10-1",2006,
"風間邦彦,伊藤浩志,鞠谷雄士","窒下ホウ素/高分子複合材料によるマイクロ表面構造体を有する射出成形品の表面転写性と高次構造","第14回複合材料界面科学シンポジウム","最新の複合材料界面科学研究2006",,,,"pp. P-9-1",2006,
"H.Ito,K.Kazama,T.Kikutani,K.Okubo,S.Tanaka","Microscale Disk in Ultra Miniature Injection Molding","SPE Annual Technical Conference 2006","SPE, INC., ANTEC Tech. Papers 2006",,,,"pp. 2511-2515",2006,
"H.Ito,K.Kazama,T.Yasuhara,T.Saito,T.Kikutani","Structure and Properties of Thin-wall Molded with Micro Surface Features","SPE Annual Technical Conference 2006","SPE, INC., ANTEC Tech. Papers 2006",,,,"pp. 2506-2510",2006,
"Y.Qi,H.Ito,T.Kikutani","Effect of Laser-irradiation Heating on Fiber Structure Development in High-speed Melt Spinning of Polyoxymethylene","第55回高分子討論会","第55回高分子討論会予稿集",,"Vol. 55","No. 2","pp. 4469-4470",2006,
"伊藤浩志,風間邦彦,齊藤卓志,安原鋭幸,鞠谷雄士,高岡俊允","マイクロ/ナノモールディングによる超微細表面構造体の成形と高次構造形成","第55回高分子討論会","第55回高分子討論会予稿集",,"Vol. 55","No. 2","pp. 3310-3311",2006,
"伊藤浩志,風間邦彦,鞠谷雄士,中嶋健,西敏夫","マイクロモールディングによるマイクロディスクの内部構造と表面特性","第55回高分子討論会","第55回高分子討論会予稿集",,"Vol. 55","No. 2","pp. 5691",2006,
"伊藤浩志,風間邦彦,鞠谷雄士,國本栄起,小林博行","マイクロプリズム射出成形品の転写性と高次構造形成","第55回高分子学会年次大会","第55回高分子学会年次大会予稿集",,"Vol. 55","No. 1","pp. 2363",2006,
"W.G.Hahm,H.Ito,T.Kikutani","Deformation and Orientation of PET Filament via High Speed In-line Drawing","SPE Annual Technical Conference 2006","SPE, INC., ANTEC Tech. Papers 2006",,,,"pp. 1644-1648",2006,
"S.Tanaka,K.Taira,K.Okubo,H.Ito,H.Hamada","Numerical Simulation and Experimental Study on Metal Injection Molding","SPE Annual Technical Conference 2006","SPE, INC., ANTEC Tech. Papers 2006",,,,"pp. 1220-1224",2006,
"塩谷朋之,伊藤浩志,鞠谷雄士","PETの水冷紡糸におけるエアーギャップ縮小に伴う紡糸線の安定化に関する数値解析と実験解析","平成18年度 繊維機械学会　第59回年次大会","繊維機械学会　第59回年次大会研究発表論文集",,,,"pp. 250-251",2006,
"星野佑太,伊藤浩志,鞠谷雄士,辻本拓哉,渡辺哲哉,片山隆","熱可塑性ポリビニルアルコールを用いた複合繊維の繊維構造形成機構","平成18年度繊維学会年次大会","繊維学会予稿集2006",,"Vol. 61","No. 1","pp. 27",2006,
"W.G.Hahm,H.Ito,T.Kikutani","On-line Measurement Studies on Filament Deformation and Orientation Development Behaviors in High Speed In-line Drawing Process","平成18年度繊維学会年次大会","繊維学会予稿集2006",,"Vol. 61","No. 1","pp. 36-37",2006,
"山本清志,河原豊,伊藤浩志,鞠谷雄士","再生ポリエステル繊維におけるオリゴマーの溶出挙動","平成18年度繊維学会年次大会","繊維学会予稿集2006",,"Vol. 61","No. 1","pp. 127",2006,
"三原和加子,伊藤浩志,風間邦彦,鞠谷雄士,吉永耕二,辛川弘行,小滝雅也,濱田泰以","界面制御シリカ/PMMA複合材料を用いた射出成形品の構造と力学物性","プラスチック成形加工学会　第17回年次大会","成形加工’06",,,,"pp. 309-310",2006,
"郡洋平,伊藤浩志,鞠谷雄士,金井俊孝,武部智明,南裕","組成分布制御PPの溶融紡糸における成形性と繊維構造形成","プラスチック成形加工学会　第17回年次大会","成形加工’06",,,,"pp. 193-194",2006,
"高岡俊允,八尾和幸,北川清一郎,伊藤浩志,安原鋭幸,齊藤卓志","非晶性高分子材料における超微細構造を有する成形品の成形転写性と高次構造","プラスチック成形加工学会　第17回年次大会","成形加工’06",,,,"pp. 33-34",2006,
"國本栄起,小林博行,伊藤浩志,風間邦彦,鞠谷雄士","プリズム付薄肉平板の成形性と光学特性","プラスチック成形加工学会　第17回年次大会","成形加工’06",,,,"pp. 9-10",2006,
"伊藤浩志,風間邦彦,安原鋭幸,斉藤卓志,鞠谷雄士,林和樹,山極佳年,坂田雄一","マイクロ射出成形プロセスにおける超薄肉流路でのオンライン光学異方性計測","プラスチック成形加工学会　第17回年次大会","成形加工’06",,,,"pp. 15-16",2006,
"伊藤浩志,風間邦彦,鞠谷雄士,大久保健児,田中茂雄","超微細成形におけるマイクロディスクの成形性と高次構造","プラスチック成形加工学会第13回秋季大会","成形加工シンポジア’05",,,,"pp. 255-256",2005,Nov.
"星野佑太,伊藤浩志,鞠谷雄士,辻本拓哉,渡辺哲哉,片山隆","熱可塑性ポリビニルアルコールの高速溶融紡糸における繊維構造形成機構","プラスチック成形加工学会第１３回秋季大会","成形加工シンポジア’05",,,,"pp. 297-298",2005,Nov.
"伊藤浩志,風間邦彦,斉藤卓志,安原鋭幸,鞠谷雄士","マイクロ薄肉射出成形における転写性と高次構造・物性評価","第17回日本レロジー学会高分子加工技術討論会","第17回日本レロジー学会高分子加工技術討論会要旨集",,,,"pp. CDROM:07",2005,Nov.
"風間邦彦,伊藤浩志,斉藤卓志,安原鋭幸,鞠谷雄士,國本栄起,小林博行","微小プリズム表面を有する薄肉成形品の転写性と高次構造","プラスチック成形加工学会第１３回秋季大会","成形加工シンポジア’05",,,,"pp. 253-254",2005,Nov.
"斉藤卓志,田尻篤史,伊藤浩志,安原鋭幸,佐藤勲,川口達也","接触界面温度測定による樹脂熱物性推定手法の提案","プラスチック成形加工学会第１３回秋季大会","成形加工シンポジア’05",,,,"pp. 273-276",2005,Nov.
"八木沢勇介,伊藤浩志,鞠谷雄士","非晶性環状ポリオレフィンコポリマーの伸長変形による複屈折変化","プラスチック成形加工学会第１３回秋季大会","成形加工シンポジア’05",,,,"pp. 9-10",2005,Nov.
"伊藤浩志,風間邦彦,斉藤卓志,安原鋭幸,鞠谷雄士","マイクロ薄肉射出成形における転写性と高次構造・物性評価","第54回高分子討論会","第54回高分子討論会予稿集",,"Vol. 54","No. 2","pp. 5398-5399",2005,Sept.
"咸完圭,伊藤浩志,鞠谷雄士","On-line Measurement Study for Orientation Development of Poly(ethylene terephthalate) Filament in High Speed In-line Drawing Process","第54回高分子討論会","Polymer Preprints, Japan",,"Vol. 54","No. 2","pp. 5402-5403",2005,Sept.
"加藤泰崇,伊藤浩志,鞠谷雄士","低分子物質の拡散を利用した芯鞘型複合紡糸繊維断面内の屈折率分布制御","第16回繊維連合研究発表会","第16回繊維連合研究発表会予稿集",,,,"pp. 8",2005,Aug.
"塩谷朋之,伊藤浩志,鞠谷雄士","Poly(ethylene terephthalate)水冷紡糸における紡糸線の安定性と紡糸速度、溶融延伸比との関係","第16回繊維連合研究発表会","第16回繊維連合研究発表会予稿集",,,,"pp. 9",2005,Aug.
"伊藤浩志,羽田孔明,風間邦彦,安原鋭幸,斉藤卓志,鞠谷雄士","マイクロスケール構造体を有する薄肉成形品の成形性と高次構造","平成１７年度プラスチック成形加工学会年次大会","成形加工‘05",,,,"pp. 79-80",2005,June
"井出慎之助,斉藤卓志,伊藤浩志,安原鋭幸,佐藤勲,川口達也","薄肉射出成形品における対向ウエルド強度に関する研究","平成１７年度プラスチック成形加工学会年次大会","成形加工‘05",,,,"pp. 81-82",2005,June
"咸完圭,伊藤浩志,鞠谷雄士","Mechanism of Structure Development in Poly(ethylene terephthalate) Filaments via High Speed In-line Drawing Process","平成１７年度繊維学会年次大会","繊維学会予稿集2005",,"Vol. 60","No. 1","pp. 30",2005,June
"奥村菜重子,伊藤浩志,鞠谷雄士,田島武治,田中義勝,森田龍彦,金井俊孝","組成分布制御PPを用いた高速溶融紡糸および延伸における繊維の構造形成と物性","平成１７年度繊維学会年次大会","繊維学会予稿集2005",,"Vol. 60","No. 1","pp. 119",2005,June
"風間邦彦,伊藤浩志,鞠谷雄士,増田正人,船津義嗣","高強度炭酸ガスレーザー照射高速溶融紡糸における紡糸線の不安定性","平成１７年度繊維学会年次大会","繊維学会予稿集2005",,"Vol. 60","No. 1","pp. 32",2005,June
"相原広志,安原鋭幸,伊藤浩志,斉藤卓志,榎本和城,大竹尚登","樹脂基カーボンナノファイバー複合材料薄板の射出成形とその特性評価","平成１７年度プラスチック成形加工学会年次大会","成形加工‘05",,,,"pp. 95-96",2005,June
"伊藤浩志,安原鋭幸,斉藤卓志,鞠谷雄士,山極佳年","マイクロポリマープロセスの成形性と構造物性に関する基礎研究","平成１７年度プラスチック成形加工学会年次大会","成形加工‘05",,,,"pp. 437-438",2005,June
"大久保健児,田中茂雄,濱田泰以,伊藤浩志","金属粉末射出成形における流動特性と内部構造評価","平成１７年度プラスチック成形加工学会年次大会","成形加工‘05",,,,"pp. 179-180",2005,June
"黒田元彦,伊藤浩志,鞠谷雄士","ラセミ体ポリ乳酸繊維の昇温・冷却過程における結晶構造変化の分子配向依存性","平成１７年度プラスチック成形加工学会年次大会","成形加工‘05",,,,"pp. 237-238",2005,June
"羽田孔明,伊藤浩志,鞠谷雄士,志熊治雄","シンジオタクチックポリスチレンの複合溶融紡糸における可紡性向上","平成１７年度プラスチック成形加工学会年次大会","成形加工‘05",,,,"pp. 239-240",2005,June
"伊藤浩志,八木沢勇介,斉藤卓志,安原鋭幸,鞠谷雄士,山極佳年","マイクロ薄肉成形品の高次構造発現に関する実験的研究,","第54回高分子学会年次大会","第54回高分子学会年次大会予稿集",,"Vol. 54","No. 1","pp. 1912",2005,May
"X.Shi,H.Ito,T.Kikutani","Characterization on Mixed-crystal Structure of Biodegradable Poly(butylene adipate-co-terephthalate) Copolymer Fibers","第54回高分子学会年次大会","Polymer Preprints, Japan",,"Vol. 54","No. 1","pp. 1805",2005,May
"伊藤浩志,八木沢勇介,斉藤卓志,安原鋭幸,鞠谷雄士,山極佳年","薄肉射出成形品の構造形成に関する基礎的検討","第54回理論応用力学講演会","第54回理論応用力学講演会講演論文集",,,,"pp. 375-376",2005,Jan.
"X.Q.Shi,K.Aimi,H.Ito,S.Ando,T.Kikutani","Characterization on Mixed-crystal Structure of Poly(butylenes terephthalate/succinate/adipate) Biodegradable Copolymer Fibers",,"Polymer",,"Vol. 46","No. 3","pp. 751-760",2005,
"H.Ito,Y.Yagisawa,T.Saito,T.Yasuhara,T.Kikutani,Y.Yamagiwa","Structural Development in Thin-wall Injection Molding Process","SPE-ANTEC 2005","SPE, INC., ANTEC Tech. Papers",,"Vol. LXIII","No. I","pp. 894-898",2005,
"X.Shi,H.Ito,T. Kikutani","Structure Development and Properties of High-speed Melt Spun Poly(butylene terephthalate)/Poly(butylene adipate/terephthalate)Bicomponent Fibers","Polymer Processing Society 21st Annual Meeting","Conference Proceedings of the Polymer Processing Society 21",,,,"pp. CD-ROM:KL8-3",2005,
"H.Ito,Y.Yagisawa,T.Saito,T.Yasuhara,T.Kikutani,Y.Yamagiwa","Fundamental Study on Structural Development of Thin-wall Injection Molded Products","Polymer Processing Society 21st Annual Meeting","Conference Proceedings of the Polymer Processing Society 21",,,,"pp. CD-ROM:SL2-10",2005,
"N. Okumura,T Tajima,H.Ito,T. Kanai,T. Kikutani","Structure Development and Characteristics of Fibers Prepared in High Speed Melt Spinning and Drawing Processes of Polypropylenes with Controlled Stereo-regularity Distribution","Polymer Processing Society 21st Annual Meeting","Conference Proceedings of the Polymer Processing Society 21",,,,"pp. CD-ROM:SL8-18",2005,
"H.Ito,T.Saito,T.Yasuhara,T.Kikutani,Y.Yamagiwa,K.Muroi","Evaluation of Material Properties and Processability Using Intelligent Analysis System for Micro Polymer Processing","Polymer Processing Society 21st Annual Meeting","Conference Proceedings of the Polymer Processing Society 21",,,,"pp. CD-ROM:P2-5",2005,
"X.Shi,H.Ito,T.Kikutani","Development and Properties of High-speed Melt Spun Poly(butylene terephthalate) / Poly(butylenes terephthalate adipate) Bicomponent Fibers","Asian Workshop on Polymer Processing in Taiwan 2005","Proceedings of the Asian Workshop on Polymer Processing in Taiwan 2005",,,,"pp. CDROM:18",2005,
"K.Okubo,S.Tanaka,H.Ito","Molding Technology for Improvement in Dimensional Accuracy of Micro-MIM Components","Asian Workshop on Polymer Processing in Taiwan 2005","Proceeding of the Asian Workshop on Polymer Processing in Taiwan 2005",,,,"pp. CDROM:35",2005,
"T.Yasuhara. H.Aihara,H.Ito,T.Saito,K.Enomoto,N.Ohtake","Mechanical Properties of Carbon Nanofiber Reinforced Composites and Fiber Orientation Behavior in Thin-wall Injection Molding","Asian Workshop on Polymer Processing in Taiwan 2005","Proceeding of the Asian Workshop on Polymer Processing in Taiwan 2005",,,,"pp. CDROM:20",2005,
"H.Ito,K.Kazama,T.Ysuhara,T.Saito,T.Kikutani","Effect of Processing Condition on Internal Structure of Micro-scale Thin-wall Injection Molded Products","Asian Workshop on Polymer Processing in Taiwan 2005","Proceeding of the Asian Workshop on Polymer Processing in Taiwan 2005",,,,"pp. CDROM: 32",2005,
"K.Kazama,H.Ito,T.Yasuhara,T.Saito,T.Kikutani","Processability and High-order Structure of Thin-wall Injection Molded Products with Micro-features","Asian Workshop on Polymer Processing in Taiwan 2005","Proceeding of the Asian Workshop on Polymer Processing in Taiwan 2005",,,,"pp. CDROM:59",2005,
"H.Ito,T.Saito,T.Yasuhara,T.Kikutani,Y.Yamagiwa,K.Muroi","Evaluation of Material Properties and Processability Using The Intelligent Analysis System for Micromolding Process","SPE-ANTEC 2005","SPE, INC., ANTEC Tech. Papers",,"Vol. LXIII","No. I","pp. 693-698",2005,
"H.Ito,Y.Yagisawa,T.Saito,T.Yasuhara,T.Kikutani,Y.Yamagiwa","Fundamental Study on Structural Development of Thin-wall Injection Molded Products",,"Theoritical and Applied Mechanics, Japan",,"Vol. 54",,"pp. 263-268",2005,
"Y.Hada,H.Shikuma,H.Ito,T.kikutani","High-Speed Melt Spinning of syndiotactic-Polystyrene; Improvement of Spinnability and Fiber Structure Development via Bicomponent Spinning with atactic-Polystyrene",,"J. Macromol. Sci. -Phys.",,"Vol. 44",,"pp. 549-571",2005,
"Y.Hada,H.Shikuma,H.Ito,T.Kikutani","Fiber Structure Development in High-Speed Melt Spinning of Syndiotactic Polystyrene",,"Fibers and Polymers",,"Vol. 6","No. 1","pp. 19-27",2005,
"鞠谷雄士,伊藤浩志","PPS-21ポート（2），射出成形・金型，モルフォロジー・構造形成のセッションを中心に",,,"プラスチックエージ",,"No. 10","pp. 188-198",2005,
"伊藤浩志","研究総覧，紡糸・フィルム成形",,,"成形加工","Vol. 17","No. 7","pp. 437-443",2005,
"八木沢勇介,伊藤浩志,鞠谷雄士","伸長プロセスにおける非晶ポリオレフィンのオンライン複屈折計測","成形加工シンポジア’04","成形加工シンポジア’04",,,,"pp. 281-282",2004,Nov.
"伊藤浩志,斉藤卓志,安原鋭幸,鞠谷雄士,山極佳年,室井一男","インテリジェントマイクロポリマー成形システムによる材料特性および成形性の評価","成形加工シンポジア’04","成形加工シンポジア’04",,,,"pp. 375-376",2004,Nov.
"伊藤浩志,八木沢勇介,斉藤卓志,安原鋭幸,鞠谷雄士,山極佳年","超薄肉射出成形品の構造形成に関する基礎的検討","成形加工シンポジア’04","成形加工シンポジア’04",,,,"pp. 363-364",2004,Nov.
"安原鋭幸,相原広志,伊藤浩志,斉藤卓志,榎本和城,大竹尚登","カーボンナノファイバー含有射出成形品の機械的特性?薄肉化による効果?","成形加工シンポジア’04","成形加工シンポジア’04",,,,"pp. 365-366",2004,Nov.
"斉藤卓志,井手慎之助,伊藤浩志,安原鋭幸,佐藤勲,山極佳年","超薄肉射出成形品における対向ウエルドに関する基礎的研究","成形加工シンポジア’04","成形加工シンポジア’04",,,,"pp. 363-364",2004,Nov.
"X.Shi,H.Ito,T.Kikutani","Structure Development and Properties of High-speed Melt Spun Poly(butylene terephthalate) / Poly(butylene terephthalate /adipate) bicomponent Fibers","成形加工シンポジア’04","成形加工シンポジア’04",,,,"pp. 277-278",2004,Nov.
"奥村菜重子,伊藤浩志,鞠谷雄士,田島武治,田中義勝,森田龍彦,金井俊孝","組成分布制御PPを用いた高速溶融紡糸および延伸における繊維の構造形成と物性","成形加工シンポジア’04","成形加工シンポジア’04",,,,"pp. 279-280",2004,Nov.
"伊藤浩志,星野佑太,鞠谷雄士","複合繊維の高速溶融紡糸における繊維構造形成の断面形態依存性","第16回日本レロジー学会高分子加工技術討論会","第16回日本レロジー学会高分子加工技術討論会予稿集",,,,"pp. 37-38",2004,Oct.
"黒田元彦,伊藤浩志,鞠谷雄士","ラセミ体ポリ乳酸繊維の昇温過程における結晶構造変化の分子配向依存性","平成16年繊維学会秋季大会発表会","繊維学会予稿集2004, 59（3）（秋季大会発表会）",,,,"pp. 11",2004,Sept.
"星野佑太,伊藤浩志,鞠谷雄士","a-PS/s-PS複合繊維の高速溶融紡糸における繊維構造形成の断面形態依存性","平成16年繊維学会秋季大会発表会","繊維学会予稿集2004, 59（3）（秋季大会発表会）",,,,"pp. 12",2004,Sept.
"X.Shi,H.Ito,T.Kikutani","Structure development and crystal form transition of melt-spun poly(butylene adipate/butylene terephthalate) biodegradable fibers","平成16年度繊維学会年次大会","繊維学会予稿集2004, 59（1）（年次大会）",,,,"pp. 255",2004,June
"咸完圭,風間邦彦,伊藤浩志,鞠谷雄士","PETフィラメントの高速インライン延伸過程におけるオンライン計測","平成16年度プラスチック成形加工学会年次大会","成形加工‘04",,,,"pp. 165-166",2004,June
"渋谷文雄,伊藤浩志,鞠谷雄士","高速溶融紡糸ポリトリメチレンテレフタレート繊維の構造と応力下の変形挙動","平成16年度プラスチック成形加工学会年次大会","成形加工‘04",,,,"pp. 163-164",2004,June
"C.Xu,H.Ito,T.Kikutani","PET/PTT溶融ブレンドの高速紡糸による繊維構造形成に対するエステル交換反応の影響","第53回高分子学会年次大会","第53回高分子学会年次大会予稿集",,"Vol. 53",,"pp. IPg035",2004,May
"羽田孔明,伊藤浩志,鞠谷雄士,志熊治雄","高速紡糸シンジオタクチックポリスチレン繊維の結晶構造形成","第53回高分子学会年次大会","第53回高分子学会年次大会予稿集",,"Vol. 53",,"pp. IPA029",2004,May
"H.Ito,K.Suzuki,T.Kikutani,T.Kanai,H.J.Kang","Online Birefringence Measurement in Film Blowing Process",,"ANTEC Tech. Papers",,"Vol. LXII","No. II","pp. 1856-1859",2004,
"H.Ito,Y.Yagisawa,T.Kikutani","Analysis on Structure Development of Cycloolefin Copolymers in Elongational Flow via On-line Birefringence Measurement",,"Proceedings of Polymer Processing Society 2004 Asia/Australia Meeting",,,,"pp. CD-ROM:128",2004,
"W.G.Hahm,H.Ito,T.Kikutani","On-line Measurement Study in High Speed In-line Drawing Process for Poly(ethylene terephthalate) Filament",,"Proceedings of Polymer Processing Society 2004 Asia/Australia Meeting",,,,"pp. CD-ROM:97",2004,
"T.Kikutani,K.Kazama,H.Ito","Fiber Formation in Non-steady State Melt Spinning Process",,"Proceedings of Polymer Processing Society 2004 Asia/Australia Meeting",,,,"pp. CD-ROM:129",2004,
"W.Kim,T.Kikutani,H.Ito,Y.W.Kim,S.W.Kim,H.J.Kang","Structure Development of Solution Casting Polycarbonate Film",,"Proceedings of Polymer Processing Society 2004 Asia/Australia Meeting",,,,"pp. CD-ROM:216",2004,
"F.Shibuya,H.Ito,K.H.Kim,H.H.Cho,T.Kikutani","Structure and Mechnical Behaviors under Tensile Stress of PTT Fibers Prepared in High-speed Melt Spinning Process",,"Conference Proceedings of the Polymer Processing Society 20th annual meeting",,,,"pp. CD-ROM:442",2004,
"C.Xu,H.Ito,T.Kikutani","Influence of Transesterification Occurs During Poly(ethylene terephthalate)/Poly(trimethylene terephthalate) Melt Blending on Fiber Structure Development High-speed Melt Spinning Process",,"Conference Proceedings of the Polymer Processing Society 20th annual meeting",,,,"pp. CD-ROM:80",2004,
"H.Ito,S.Yamagata,T.Kikutani","Formation of PET Fibers with Controlled Diameter Variation Utilizing Drawing Process Equipped with a Vibrator",,"Conference Proceedings of the Polymer Processing Society 20th annual meeting",,,,"pp. CD-ROM:79",2004,
"Y.Samomura,T.Kikutani,H.Ito","Mechanical Behavior and Application to Rivet-joining of Extruded Polycarbonate",,"Conference Proceedings of the Polymer Processing Society 20th annual meeting",,,,"pp. CD-ROM:64",2004,
"鞠谷雄士,伊藤浩志","PPS-20レポート（2），繊維・フィルム，高分子成形加工における構造形成",,"プラスチックエージ","プラスチックエージ",,"No. 10","pp. 112-120",2004,
"伊藤浩志","研究総覧，紡糸・フィルム成形",,"成形加工","成形加工","Vol. 16","No. 7","pp. 414-419",2004,
"T.Kitayama,S.Utsumi,H.Hamada,T.Nishino,T.Kikutani,H.Ito","Interfacial Properties of PP/PP Composites",,"J.Appl.Polym.Sci.",,"Vol. 88","No. 13","pp. 2875-2883",2003,
"Y.Hada,H.Ito,T.Kikutani,H.Shikuma","Fiber Structure Development in High-speed Melt Spinning of s-PS/a-PS Bicomponent Fibers",,"Proc. 8th Japan International SAMPE symposium, Nov.18-21",,"Vol. 1",,"pp. 325-327",2003,
"H.Ito,K.Suzuki,T.Kikutani,H.J.Kang,T.Kanai","On-line Birefringence Measurement in Film Blowing of Polypropylene",,"Proc. 8th Japan International SAMPE symposium, Nov. 18-21, 2003",,"Vol. 1",,"pp. 365-368",2003,
"H.Ito,K.Suzuki,T.Kikutani,H.J.Kang","Online Analysis on Structure Formation in Film Blowing Process of Polypropylene",,"Abstracts of International Conference on Materials for Advanced Technologies ICMAT 2003",,"Vol. I-7-3",,"pp. 417",2003,
"伊藤浩志","年間展望,―プラスチックの成形加工―,構造・物性",,"塑性と加工","塑性と加工","Vol. 44","No. 511","pp. 97-99",2003,
"M.Takasaki,H.Ito,T.Kikutani","Structure Development of Polylactides with Various D-Lactide Contents in the High-Speed Melt Spinning Process",,"J. Macromol. Sci., Part B-Phys. ",,"Vol. 42","No. 1","pp. 59-75",2003,
"鞠谷雄士,伊藤浩志","複合繊維と高速溶融紡糸",,"繊維機械学会誌",,"Vol. 56","No. 5","pp. 236-242",2003,
"T.Kikutani,M.Takasaki,M.Kuroda,H.Ito","Foramtion of Stereocomplex Crystals in Fiber Processing of Racemate Polylactide",,"Conference Proceedings of the Polymer Processing Society 19",,,,"pp. CD-ROM:956",2003,
"H.Ito,K.Suzuki,T.Kikutani,H.J.Kang","Experimental Analysis on Structure Formation in Tubular Film Blowing",,"Conference Proceedings of the Polymer Processing Society 19",,,,"pp. CD-ROM:192",2003,
"C.Xu,H.Ito,T.Kikutani","Influence of Branching on the Structure and Properties of Poly(ethylene terephthalate) Fibers obtained by High-speed Melt Spinning",,"Conference Proceedings of the Polymer Processing Society 19",,,,"pp. CD-ROM:957",2003,
"T.Kikutani,M.Takasaki,M.Kuroda,H.Ito","Development of Fiber Structure with Highly Oriented Stereocomplex Crystals in High-speed Melt Spinning and Subsequent Annealing of Racemate Polylactides",,"Conference Proceedings of Advanced Polymeric Materials and Technology, APMT-2003, August 4-7, Gyeongju, Korea",,,,"pp. CD-ROM:6-2-05",2003,
"H.Ito,K.Suzuki,T.Kikutani,H.J.Kang,T.Kanai","On-line Measurement on Structure Formation in Film Blowing Process",,"Conference Proceedings of Advanced Polymeric Materials and Technology, APMT-2003, August 4-7, Gyeongju, Korea",,,,"pp. CD-ROM:P-2-24",2003,
"Y.Shimomura,H.Ito,T.Kikutani","Effect of the Shape of Flow Channel on Fiber Structure Development in High-Speed Melt Spinning of PP/PE Bicomponent Fibers",,"Conference Proceedings of Polymer Processing Society 2003, September 14-17, Athens, Greece",,,,"pp. CD-ROM:171",2003,
"K.Kazama,H.Ito,T.Kikutani","Fiber Structure Development in Melt Spinning Process with  Periodic Modulation of Take-up Velocity",,"Conference Proceedings of Polymer Processing Society 2003, September 14-17, Athens, Greece",,,,"pp. CD-ROM:172",2003,
"M.Takasaki,H.Ito,T.Kikutani","Development of Stereocomplex Crystal of Polylactide in High-Speed Melt Spinning and Subsequent Drawing and Annealing Processes",,"J. Macromol. Sci.-Phys.",,"Vol. 42","No. 3","pp. 403-420",2003,
"Yoriko Shimomura,Hiroshi Ito,Takeshi Kikutani","Reversing of Enhancement and Supression Effects in Structure Formation of PP/PE Bicomponent Fibers during High-Speed Spinning Process",,"Polymer Processing Society Europe/Africa Regional Meeting",,,,"pp. CD-R",2003,
"H.Ito,K.Suzuki,T.Kikutani,K.Nakayama","Drawing Behaviors and Its On-line Birefringence Measurements for Polyester Films",,"Conference Proceedings of the Polymer Processing Society 18",,,,"pp. (CD-ROM:132)",2002,
"H.Ito,T.Kikutani","Drawing Behaviors and Its On-line Birefringence Measurements for Polyester Films",,"22nd Sino-Japanese Modern Engineering and Technology Symposium, 2002",,,,"pp. 36",2002,
"北山威夫,石倉健太郎,濱田泰以,鞠谷雄士,伊藤浩志","PP/PP同種異形態複合材料の力学特性",,"成形加工",,"Vol. 14","No. 10","pp. 663-670",2002,
"M.Takasaki,H.Ito,T.Kikutani","Development of Stereocomplex Crystal of Polylactides in High-Speed Melt Spinning and Subsequent Drawing and Annealing Processes",,"International Symposium on Polymer Crystallization, Jun 9-12, Mishima Japan",,,,"pp. 40-43",2002,
"H.Ito,O.H.Cho,T.Kikutani","Hot Drawing of PET Fiber Utilizing Multiple Reflection of CO_2 Laser Beam",,"Conference Proceedings of Polymer Processing Society 2002, November 4-8, Taipei, Taiwan",,,,"pp. CD-ROM 200",2002,
"伊藤浩志,鞠谷雄士","伸長プロセスにおけるオンライン分子配向計測",,"成形加工","成形加工","Vol. 14","No. 5","pp. 287-292",2002,
"H.Ito,Y.Shimomura,T.Kikutani","Fiber Structure Formation in High-speed Melt Spinning of PP/PE Sheath-core Type Bicomponent Fibers",,"International Symposium on Polymer Crystallization, Jun 9-12, Mishima Japan",,,,"pp. 200-201",2002,
"H.H.Cho,H.Ito,T.Kikutani,K.H.Kim,F.Shibuya","Fiber Structure Development in High-speed Spinning of Poly(trimethylene terephthalate)",,"Conference Proceedings of Polymer Processing Society 18",,,,"pp. (CD-ROM: 131)",2002,
"Y.Hada,H.Ito,T.Kikutani","Fiber structure development in high-speed melt pinning of s-PS/a-PS bicomponent fibers",,"Conference Proceedings of Polymer Processing Society 2002, November 4-8, Taipei, Taiwan",,,,"pp. CD-ROM 198",2002,
"T.Kikutani,K.Fukutome,H.Ito","High-speed Melt Spinning of Poly(ethlene 2, 6-naphthalene dicarboxylate)/Amorphous Polymer Sheath-core fibers and Analysis of Physical Network Structure",,"Conference Proceedings of Polymer Processing Society 2002, November 4-8, Taipei, Taiwan",,,,"pp. CD-ROM 199",2002,
"伊藤浩志","プラスチック成形加工データブック　第2版, 第3章成形加工特性",,"（社）日本塑性加工学会編　　日刊工業新聞社","（社）日本塑性加工学会編　　日刊工業新聞社",,,,2002,
"Wataru Takarada,Hiroshi Ito,Takeshi Kikutani,Norimasa Okui","Studies on High-Speed Melt Spinning of Noncircular Cross-Section Fibers. II. On-Line Measurements of the Spin Line, Including Change in Cross-Sectional Shape",,"J. Appl. Polym. Sci.",,"Vol. 80",,"pp. 1582-1588",2001,
"K.Kazama,H.Ito,T.Kikutani","Fiber Structure Development in Melt Spinning Process with Periodic Modulation of Take-up Velocity",,"Abstracts of International Conference on Advanced Polymers and Processing 2001 Yonezawa",,,,"pp. 94-95",2001,
"HIROSHI ITO","Applied Rheology Discussed in the 12th Annual Meeting of the Japan Society of Polymer Processing",,"Applied Rheology","Applied Rheology","Vol. 11","No. 4","pp. 230",2001,
"H.Ito,K.Suzuki,T.Kikutani,K.Nakayama","Flow Drawing Behaviors and Its On-line Birefringence Measurement for Polyester Films",,"Abstracts of International Conference on Advanced Polymers and Processing 2001 Yonezawa",,,,"pp. 74-75",2001,
"Y.Shimomura,H.Ito,T.Kikutani","Fiber Structure Development in High-speed Spinning of PP/PE Sheath-core Type Bicomponent Fibers",,"Abstracts of International Conference on Advanced Polymers and Processing 2001 Yonezawa",,,,"pp. 66-67",2001,
"Hiroshi Ito","Injection Molded Semicrystalline Polymers -Structure Development and Modeling-  ",,"Encyclopedia of Materials, Science and Technology, Elsevier Science Ltd.","Encyclopedia of Materials, Science and Technology, Elsevier Science Ltd.",,,"pp. 4082-4088",2001,
"Wataru Takarada,Hiroshi Ito,Takeshi Kikutani,Norimasa Okui","Studies on High-Speed Melt Spinning of Noncircular Cross-Section Fibers. III. Modeling of Melt Spinning Process Incorporating Change in Cross-Sectional Shape",,"J. Appl. Polym. Sci.",,"Vol. 80",,"pp. 1589-1600",2001,
"Wataru Takarada,Hiroshi Ito,Takeshi Kikutani,Norimasa Okui","Studies on High-Speed Melt Spinning of Noncircular Cross-Section Fibers. I. Structural Analysis of As-Spun Fibers",,"J. Appl. Polym. Sci.",,"Vol. 80",,"pp. 1575-1581",2001,
"T.Kitayama,K.Ishikura,H.Hamada,T.Kikutani,H.Ito","Mechanical Properties of PP/PP Composites",,"Proceedings of ANTEC 2001",,,,"pp. (CD-ROM :694)",2001,
"M.Takasaki,H.Ito,T.Kikutani","Structure Development of Polylactides with Various D-lactide Content in the High-speed Melt Spinning",,"Proceedings of Polymer Processing Society 17th annualmeeting",,,,"pp. (CD-ROM : 337)",2001,
"W.Takarada,K.Kazaman H.Ito,T.Kikutani","High-speed Melt Spinning with Periodic Oscillation of Take-up Velocity",,"Proceedings of Polymer Processing Society 17th annualmeeting",,,,"pp. (CD-ROM : 339)",2001,
"H.Ito,K.Suzuki,T.Kikutani,K.Nakayama","Analysis of Flow Behavior and Resultant Network Structure in Uniaxial and Biaxial Elongation of PEN",,"Proceedings of ANTEC 2001",,,,"pp. (CD-ROM : 729)",2001,
"H.Ito,K.Suzuki,T.Kikutani,K.Nakayama","On-line Measurement of Birefringence Development in Uniaxial and Biaxial Elongation of PEN",,"Proceedings of Polymer Processing Society 17th annual meeting",,,,"pp. (CD-ROM : 340)",2001,
"鞠谷雄士,伊藤浩志","プラスチック成形品の構造解析―絡み合い構造解析―",,"成形加工","成形加工","Vol. 13","No. 3","pp. 167-171",2001,
"X.Shi,M.Takasaki,H.Ito,T.Kikutani","Fiber Structure Development in Melt Spinning of Poly(butylene succinate) Fibers",,"Abstracts of International Conference on Advanced Polymers and Processing 2001 Yonezawa",,,,"pp. 118-119",2001,
"Y.Hada,H.Ito,T.Kikutani","Influence of the Presence of Neighboring Fibers on the Stress Distribution in the Vicinity of Embedded Fibers in Single-fiber Pull-out Test",,"Abstracts of International Conference on Advanced Polymers and Processing 2001 Yonezawa",,,,"pp. 156-157",2001,
"Wataru Takarada,Hiroshi Ito,Takeshi Kikutani,Norimasa OKui","Studies on High-Speed Melt Spinning of Noncircular Cross-Section Fibers. III. Modeling of Melt Spinning Process Incorporating Change in Cross-Sectional Shape",,"J. Appl. Polym. Sci.",,"Vol. 80",,"pp. 1589-1600",2001,
"wataru takarada,kunihiko kazama,Hiroshi Ito,T.Kikutani","High-speed Melt Spinning with Periodic Oscillation of Take-up Velocity",,"Proceedings of Polymer Processing Society 17th annualmeeting",,,,"pp. (CD-ROM : 339)",2001,
"wataru takarada,kunihiko kazama,Hiroshi Ito,T.Kikutani","High Speed Melt Spinning with Periodic Oscillation of Take-up Velocity",,"CAE in Polymer Processing, Gordon Conference, Ventula, USA",,"Vol. March",,,2001,
"Wataru Takarada,Hiroshi Ito,Takeshi Kikutani,Norimasa OKui","Studies on High-Speed Melt Spinning of Noncircular Cross-Section Fibers. I. Structural Analysis of As-Spun Fibers",,"J. Appl. Polym. Sci.",,"Vol. 80",,"pp. 1575-1581",2001,
"Wataru Takarada,Hiroshi Ito,Takeshi Kikutani,Norimasa OKui","Studies on High-Speed Melt Spinning of Noncircular Cross-Section Fibers. II. On-Line Measurements of the Spin Line, Including Change in Cross-Sectional Shape",,"J. Appl. Polym. Sci.",,"Vol. 80",,"pp. 1582-1588",2001,
"占部宏生,伊藤浩志,鞠谷雄士,奥居徳昌","ポリプロピレンの高速溶融紡糸過程における分子配向形成のオンライン計測",,"成形加工",,"Vol. 12","No. 11","pp. 729-735",2000,Nov.
"Emil Giza,Hiroshi Ito,Takeshi Kikutani,Norimasa Okui","Structural Control of Polyamide 6/Clay Nanocomposite Fibers by In-line Drawing",,"Journal of Polymer Engineering",,"Vol. 20","No. 6","pp. 403-425",2000,June
"Emil Giza,Hiroshi Ito,Takeshi Kikutani,Norimasa Okui","Fiber Structure Development in High-speed Melt Spinning of Polyamide 6/Clay Hybrid Nano-composite",,"J. Macromol. Sci., Phys.",,"Vol. B39","No. 4","pp. 545-559",2000,Apr.
"鞠谷雄士,伊藤浩志","プラスチック成形品の高次構造解析 ?複屈折と分子配向の基礎?",,"成形加工","成形加工","Vol. 12","No. 7","pp. 427-431",2000,
"鞠谷雄士,伊藤浩志","プラスチック成形品の高次構造解析 ?複屈折測定の応用?",,"成形加工","成形加工","Vol. 12","No. 8","pp. 502-506",2000,
"鞠谷雄士,伊藤浩志","プラスチック成形品の高次構造解析 ?広角Ｘ線回折による結晶配向解析?",,"成形加工","成形加工","Vol. 12","No. 9","pp. 556-560",2000,
"C.Xu,H.Ito,T.Kikutani,N.Okui,K.Srikulkit","Fiber Structure Development in High-speed Melt Spinning of Cation Dyeable Copolyester Containing DMS and DEG",,"Proceedings of the 16th PPS annual meeting",,,,"pp. P-9-8",2000,
"鞠谷雄士,伊藤浩志","プラスチック成形品の高次構造解析 ?赤外吸収分光法，ラマン分光法，蛍光偏光法による分子配向解析?",,"成形加工","成形加工","Vol. 12","No. 10","pp. 631-637",2000,
"鞠谷雄士,浅井茂雄,伊藤浩志","プラスチック成形品の高次構造解析 ?結晶化度の解析?",,"成形加工","成形加工","Vol. 12","No. 12","pp. 775-780",2000,
"占部宏生,伊藤浩志,鞠谷雄士,奥居徳昌","ポリプロピレンの高速溶融紡糸過程における分子配向形成のオンライン計測",,"成形加工",,"Vol. 12","No. 11","pp. 729-735",2000,
"E.Giza,H.Ito,T.Kikutani,N.Okui","Fiber Structure Formation in High-Speed Melt Spinning of Polyamide 6/Clay Hybrid Nanocomposite",,"J.Macromolecular Sci.,Phsics",,"Vol. B39","No. 4","pp. 545-559",2000,
"鞠谷雄士,伊藤浩志","伸長プロセスの現状と今後の課題",,"成形加工","成形加工","Vol. 12","No. 11","pp. 695-700",2000,
"T.Kikutani,H.Urabe,W.Takarada,H.Ito","On-line Measurement of Orientation Development in High-speed Melt Spinning of Polypropylene",,"Proceedings of the Polymer Fibers 2000 ",,,,,2000,
"H.H.Cho,K.H.Kim,H.Ito,T.Kikutani","Fine-structure and Physical Properties of Polyethylene Fibers in High-speed Spinning, II Effect of Catalyst Systems in Linear Low-density Polyethylene",,"J.Appl.Polym.Sci.",,"Vol. 77",,"pp. 1195-1206",2000,
"H.H.Cho,K.H.Kim,H.Ito,T.Kikutani","Fine-structure and Physical Properties of Polyethylene Fibers in High-speed Spinning, I Effect of Melt-flow Rate in the High-density Polyethylene",,"J.Appl.Polym.Sci.",,"Vol. 77",,"pp. 1182-1194",2000,
"H.H.Cho,K.H.Kim,Y.A.Kang,H.Ito,T.Kikutani","Fine-structure and Physical Properties of Polyethylene/Poly(ethylene terephthalate) Bicomponent Fibers in High-speed Spinning, II Poly(ethylene terephthalate) Sheath/Polyethylene Core Fibers",,"J.Appl.Polym.Sci.",,"Vol. 77",,"pp. 2267-2277",2000,
"H.H.Cho,K.H.Kim,Y.A.Kang,H.Ito,T.Kikutani","Fine-Structure and Physical Properties of Polyethylene/Poly(ethylene terephthalate) Bicomponent Fibers in High-speed Spinning, I Polyethylene Sheath/Poly(ethylene terephthalate) Core Fibers",,"J.Appl.Polym.Sci.",,"Vol. 77",,"pp. 2254-2266",2000,
"E.Giza,H.Ito,T.Kikutani,N.Okui","Structural Control of Polyamide 6/Clay Nanocomposite Fibers by In-line Drawing Process",,"J. Polym. Eng.",,"Vol. 20",,"pp. 403-425",2000,
"鞠谷雄士,伊藤浩志","プラスチック成形品の高次構造解析 ?回折・散乱による構造解析の基礎?",,"成形加工","成形加工","Vol. 12","No. 5","pp. 261-266",2000,
"Hiroshi Ito,Takahiro Suzuki,Takeshi Kikutani,Kazuo Nakayama","On-line Analysis of Stress and Birefringence Development in Simultaneous Biaxial Elongation of Poly(ethylene terephthalate)",,"ANTEC Tech. Paper",,,,"pp. 1715-1719",2000,
"T.Kikutani,H.Urabe,wataru takarada,Hiroshi Ito","On-line measurement of orientation development in high-speed melt spinning of polypropylene",,"Polymer Fibres 2000, Manchester, UK",,,,"pp. 1",2000,
"T. Kikutani,K.Nakao,Wataru Takarada,Hiroshi Ito","On-line Measurement of Orientation Development in the High-Speed Melt Spinning Process",,"Polymer Engineering & Science",,"Vol. 39","No. 12","pp. 2349-2357",1999,Dec.
"J. Radhakrishnan,Hiroshi Ito,T. Kikutani,Norimasa Okui","Enhancement of Fiber Structure Formation of a Liquid Crystalline Copolyester via Ultra High-Speed Bicomponent Spinning with Poly(ethylene terephthalate)",,"Polymer Engineering & Science",,"Vol. 39","No. 1","pp. 89-98",1999,Jan.
"T. Kikutani,K.Nakao,W.Takarada,H.Ito","On-line Measurement of Orientation Development in High-Speed Melt Spinning of Poly(ethylene terephthalate)(共著）",,"Proceedings of the 15th Polymer Processing Society Annual Meeting",,,,"pp. Film and Fibre, 18",1999,
"E.Giza,H.Ito,T Kikutani,N.Okui","Enhancement of a Crystalline Phase Formation in High-Speed Melt Spinning of Nylon 6/Clay Hybrid Nanocomposite",,"Proceedings of the International Conference on Advanced Fiber Materials",,,,"pp. 209-210",1999,
"W. Takarada,H. Ito,T. Kikutani","On-line Measurement and Numerical Simulation on the Change of Cross-Sectional Shape for Melt Spinning Process of Non-circular Fibers",,"Proceedings of the 5th Asian Textile Conference",,,,"pp. 1002-1005",1999,
"H.S.Cho,H.Ito,T.Kikutani,N.Okui","Analysis on the Continuous Drawing Process of Poly(ethylene terephthalate) through On-line Measurement of Moving Thread-line",,"Proceedings of the 5th Asian Textile Conference",,,,"pp. 999-1001",1999,
"T.Kikutani,E Giza,H.Ito,N.Okui","Fiber Structure Development in High-speed Melt Spinning of Nylon 6/Clay Nanocomposite",,"Proceedings of the Polymer Processing Society, Asia-Australia Regional Meeting",,,,"pp. 253-254",1999,
"H.S.Kim,H.Ito,T.Kikutani,N.Okui","Computational Analysis on the Thermal Bonding Behavior of Bicomponent Fibres",,"J. Text. Inst.",,"Vol. 90","No. 1","pp. 508-525",1999,
"T. Kikutani,K.Nakao,W.Takarada,H.Ito","On-line Measurement of Orientation Development in the High-Speed Melt Spinning Process ",,"Polym. Eng. Sci.",,"Vol. 39","No. 12","pp. 2349-2357",1999,
"K.Miyata,H.Ito,T.Kikutani,N.Okui","Structural Change of High-Speed Spun Poly(ethylene 2,6-naphthalate dicarboxylate) Fibers with Annealing ",,"Sen'i Gakkaishi",,"Vol. 55","No. 11","pp. 542-551",1999,
"K.Miyata,H.Ito,T. Kikutani,N.Okui","Fiber Structure Development in High-Speed Melt Spinning of Poly(ethylene terephthalate-co-2,6-naphthalene dicarboxylate)",,"J.Polym.Eng.",,"Vol. 19","No. 6","pp. 395-418",1999,
"T.Furuta,J.Radhakrishnan,H.Ito,T.Kikutani,N.Okui","Fabrication of Continuous Fiber-Reinforced Thermoplastic Composites with Structural Gradient from Sheath-Core Type Bicomponent Fibers（共著）",,"Composite Interfaces",,"Vol. 6","No. 5","pp. 451-466",1999,
"Hiroshi Ito,Takahiro Suzuki,Takeshi Kikutani,Norimasa Okui,Kazuo Nakayama","Analysis of Flow Behavior and Resultant Network Structure in Simultaneous Biaxial Elongation of Poly(ethylene terephthalate)（共著）",,"Proceedings of the 15th Polymer Processing Society Annual Meeting",,,,"pp. Rheology, 28",1999,
"Jeong Hung Joong,H.Ito,T.Kikutani","High-Speed Melt Spinning of polyamide 6/Poly(ethylene terephthalate) Bicomponent Fibers(共著）",,"Proceedings of the 15th Polymer Processing Society Annual Meeting",,,,"pp. Film and Fibre, 19",1999,
"T.Kikutani,K.Nakao,wataru takarada,Hiroshi Ito","On-line Measurement of Orientation Development in High-Speed Melt Spinning of Poly(ethylene terephthalate)",,"Proceedings of the 15th Polymer Processing Society Annual Meeting",,,,"pp. Film and Fibre, 18",1999,
"T. Kikutani,E. Giza,Hiroshi Ito,NORIMASA OKUI","Fiber Structure Development in High-speed Melt Spinning of Nylon 6/Clay Nanocomposite",,"Polymer Processing Society, Asia-Australia Regional Meeting",,,,"pp. 253-254",1999,
"T. Kikutani,K. Nakao,wataru takarada,Hiroshi Ito","On-line Measurement of Orientation Development in the High-Speed Melt Spinning Process",,"Polym. Eng. Sci.",,"Vol. 39","No. 12","pp. 2349-2357",1999,
"J.Radhakrishnan,H.ito,T.Kikutani,N.Okui","Control of Fiber Structure Development of Poly(ethylene terephthalate)by High-speed Coextrusion Fiber Spinning with Polystyrene(共著)",,"Proceedings of the 14th Polymer Processing Society Annual Meeting",,,,"pp. 705-706",1998,
"K.Miyata,N.J.Terrill,A.J.Ryan,H.Ito,T.Kikutani,N.Okui","Development of Structure in High-speed Spun Poly(ethylene-2,6-naphthalene dicarboxylate)Fibers under Different Spinning Conditions(共著)",,"Proceedings of the 14th Polymer Processing Society Annual Meeting",,,,"pp. 590-591",1998,
"Yukiko FURUHASI,Hiroshi ITO,Takeshi KIKUTANI,Takashi YAMAMOTO,Mitsugu KIMIZU,Mukerrem CAKMAK","Structural Analysis of Poly(3-hydroxybutyrate-co-3-hydroxyvalerate) Fibers Prepared by Drawing and Annealing Processes（共著）",,"Journal of Polymer Science: Part B: Polymer Physics",,"Vol. 36",,"pp. 2471-2482",1998,
"村田章,伊藤浩志,鞠谷雄士,奥居徳昌","PVDFの高速紡糸における液体恒温槽を用いた高次構造制御（共著）",,"成形加工",,"Vol. 10","No. 7","pp. 554-562",1998,
"Hiroshi ITO,Rikiya SATO,Tomonari NAKAYAMA,Mitsuru UEDA","Synthesis and Evaluation of Alicyclic Backbone Polymers for 193 nm Lithography",,"ACS, Symp.",,"Vol. 706",,"pp. 208-223",1998,
"Hyungjoong JEON,Hiroshi ITO,Takeshi KIKUTANI,Norimasa OKUI,Miyoshi OKAMOTO","Effect of Metrallic Wire Inserted in Nozzle in High-speed Melt Spinning of Poly(ethylene terephthalate)（共著）",,"Journal of Applied Polymer Science",,"Vol. 70",,"pp. 665-674",1998,
"K.Miyata,H.Ito,T.Kikutani,N. Okui","Effect of Liquid Isothermal Bath in High-Speed Melt Spinning of Poly(ethylene 2,6-naphthalane dicarboxylate)（共著）",,"Sen'i Gakkaishi",,"Vol. 54","No. 12","pp. 661-671",1998,
"T.Furuta,J.Radhakrishnan,H.Ito,T.Kikutani,N.Okui","Fabrication of TLCP Reinforced Composites with Structural Gradient From Sheath-core Bicomponeut Fibers(共著)",,"Proceedings of the 14th Polymer Processing Society Annual Meeting",,,,"pp. 780-781",1998,