"韓敏,高橋邦夫,恩澤忠男,斎藤滋規","誘電体における静電マニピュレーションの境界要素解析",,"溶接学会全国大会講演概要",,,"No. 75","pp. 158-159",2004,
"栗原健児,高橋邦夫,斎藤滋規,恩澤忠男","表面相互作用等のノイズの多い非線形系に対する制御計測システムの試作",,"溶接学会全国大会講演概要",,,"No. 75","pp. 160-161",2004,
"尾畑賢一,本門智之,斎藤滋規,高橋邦夫,恩澤忠男","物体形状が液架橋のラプラス圧に及ぼす影響とその微小物体操作への応用",,"日本高圧力技術協会講演概要",,,,"pp. 5-6",2004,
"勝田治,高橋邦夫,恩澤忠男,斎藤滋規","相変態を利用した微小物体操作法",,"溶接学会全国大会講演概要",,,"No. 75","pp. 156-157",2004,
"Shigeki Saito,Hideki Himeno,Kunio Takahashi,Tadao Onzawa","Voltage Criterion for Electrostatic Detachment of a Microparticle from a Micromanipulated",,"Proceeding of THERMEC 2003; Material Science Forum",,"Vol. 426",,"pp. 2345-2350",2003,
"飯山孝志,恩澤忠男","高温用熱電モジュールのろう付法による実用化研究",,"日本高圧力技術協会２００３秋季講演会概要集",,,,"pp. 30-31",2003,
"名越達彦,斎藤滋規,高橋邦夫,恩澤忠男","SEM環境下マイクロマニピュレーションにおける電子線の影響",,"9th symposium Miceojoing and Assembly in Electronics(mate 2003)",,,,"pp. 87-90",2003,
"尾畑賢一,斎藤滋規,高橋邦夫,恩澤忠男","微小体操作のための液架橋力解析",,"9th symposium Miceojoing and Assembly in Electronics(mate 2003)",,,,"pp. 81-86",2003,
"尾畑賢一,斎藤滋規,高橋邦夫,恩澤忠男","液体体積制御による液架橋力解析",,"溶接学会全国大会講演概要",,"Vol. 72",,"pp. 192-193",2003,
"渡辺茂,高橋邦夫,恩澤忠男","グロー・アーク遷移領域におけるプラズマ状態の観察",,"日本高圧力技術協会２００３年度春季講演会概要集",,,,"pp. 5-6",2003,
"Shigeki Saito,Hideki Himeno,Kunio Takahashi,Tadao Onzawa","Criterion for Electrostatic Detachment of an Adhering Microparticle",,"Technical Proceedings of the 2003 Nanotechnology Conference and Trade Show",,"Vol. 3",,"pp. 98-101",2003,
"K.Takahashi,Y.An,S.Saito,T.Onzawa","Introduction of Micro-manipulation by adhesional foece and dielectric force",,"Technical Proceedings of the 2003 Nanotechnology Conference and Trade Show",,"Vol. 1",,"pp. 518-521",2003,
"Shigeru Watanabe,Shigeki Saito,Kunio Takahashi,Tadao Onzawa","Observations of the glow-to-arc transition between thoriated tungsten electrodes with a parallel RC circuit",,"Journal of Physics D: Applied Physics",,"Vol. 36","No. 20","pp. 2521-2525",2003,
"Kunio Takahashi,Tadao Onzawa","Theoretical Interpretation of Adheasion Phenomena and its Application to Micro-Manipulation",,"Proceeding of THERMEC 2003; Material Science Forum",,"Vol. 426",,"pp. 2231-2236",2003,
"Xiaoying Yuan,Kunio Takahashi,Yingchen Yin,Tadao Onzawa","Development of modified embeded atom method for a bcc metal:lithium",,"Modelling Simul. Mater. Sci. Eng.",,"Vol. 11","No. 4","pp. 447-456",2003,
"高橋邦夫,殷　迎晨,恩澤忠男","二量体構造参照による埋め込み原子法",,"日本高圧力技術協会秋季講演会講演概要集",,,,"pp. 31-32",2002,
"恩澤忠男,飯山孝志","Nb-Cu爆発圧接界面のTEM観察",,"日本高圧力技術協会秋季講演会講演概要集",,,,"pp. 29-30",2002,
"渡辺　茂,斎藤滋規,高橋邦夫,恩澤忠男","グロー・アーク遷移領域におけるプラズマの電流電圧特性",,"溶接学会論文集",,"Vol. 20","No. 4","pp. 493-498",2002,
"Kunio Takahashi,Hideo Himeno,Shigeki Saito,Tadao Onzawa","Adhesion phenomenon and its aplication to manipulation for micro-assembly",,"Proceedings of the International Welding/Joing Conference-Korea 2002",,,,"pp. 781-784",2002,
"Shigeki Saito,Kunio Takahashi,Tadao Onzawa","Mechanical and adhesional manipulation technique for micro-assembly under sem",,"Proceedings of the International Welding/Joing Conference-Korea 2002",,,,"pp. 720-725",2002,
"Tadao Onzawa,Takashi Iiyama","Development of titanium-based brazing filler metals with low-melting-point ",,"Proceedings of the International Welding/Joing Conference-Korea 2002",,,,"pp. 539-544",2002,
"孫存之,渡辺茂,高橋邦夫,恩澤忠男","アーク・グロー遷移領域とその近傍におけるプラズマ状態の比較",,"溶接学会全国大会講演概要",,"Vol. 71",,"pp. 276-277",2002,
"高橋邦夫,恩澤忠男 ","二量体構造参照による埋め込み原子法の非バルク系に対する適用性の拡大",,"溶接学会全国大会講演概要",,"Vol. 71",,"pp. 102-103",2002,
"浅井琢哉,齊藤滋規,高橋邦夫,恩澤忠男","電解研磨を用いたプローブ先端曲率調整におる静電マニピュレーション可能条件域の拡大",,"溶接学会全国大会講演概要",,"Vol. 71",,"pp. 100-101",2002,
"苑暁迎,高橋邦夫,恩澤忠男","修正埋め込み原子法を二量体に適用する際の問題点に関する検討",,"溶接学会論文集",,"Vol. 20","No. 1","pp. 63-67",2002,
"恩澤忠男,飯山孝志","低融点Ti基ろうの開発",,"圧力技術",,"Vol. 40","No. 1","pp. 18-27",2002,
"姫野秀雄,スハイラビンティソイッド,安越佳,斎藤滋規,高橋邦夫,恩澤忠男","クーロン力により分離した微小物体のBEM(境界要素法)解析",,"溶接学会全国大会講演概要",,"Vol. 68",,"pp. 54-55",2001,
"渡辺茂,高橋邦夫,恩澤忠男","グロー・アーク遷移現象における電源特性の影響",,"溶接学会全国大会講演概要",,"Vol. 68",,"pp. 76-77",2001,
"斎藤慎二,茅本隆司,恩澤忠男","Ni-Cu基ろうによるステンレス鋼ろう付継手の衝撃強度",,"溶接学会論文集",,"Vol. 19","No. 1","pp. 70-76",2001,
"Shigeki.SATIO,Hideki.T.MIYZAKI,Tomomasa.SATO,Kunio TAKAHASHI,TADAO ONZAWA","Micro-object Operation Based on the Dynamic Analysis Considering",,"Proceedings of The 7th International Welding Symposium of The Japan Welding Society",,"Vol. 2",,"pp. 1243-1250",2001,
"Kunio TAKAHASHI,Hideki KAJIWARA,Masataka URAGO,Shigeki SAITO,Yoshihira MOCHIMARU,Tadao ONZAWA","Voltage Required to Detach an Adhered Particle by Coulomb Interraction for Micro-Manipulation",,"Journal of Applied Physics",,"Vol. 90","No. 1","pp. 432-437",2001,
"Shigeki Saito,Hideki T. Miyazaki,Tomomasa Sato,Kunio Takahashi,Tadao Onzawa","Analysis of Micro-object Operation Based on the Dynamics Considering the Adhesion under an SEM",,"Proc. 2001 IEEE International Conference on Intelligent Robots and Systems, Oct 2001, Maui, Hawaii USA (in press)",,,,,2001,
"Shigeki SAITO,Hideki T. MIYAZAKI,Tomomasa SATO,Kunio TAKAHASHI,Tadao ONZAWA","Dynamics of Micro-object Operation Considering the Adhesive Effect under an SEM",,"Proc. SPIE Photonics Boston Intelligent Systems and Advanced Manufacturing 2001, 28 Oct - 2 Nov 2001, Newton, Massachusetts USA (in press)",,,,,2001,
"XiaoYing YUAN,Kunio TAKAHASHI,Shuzo YAGI,Yingchen YIN,Tadao ONZAWA","Modified embedded atom method for dimers and silicon clusters - fundamental study of applicability of Modified Embedded Atom",,"Proceedings of The 7th International Welding Symposium of The Japan Welding Society",,"Vol. 2",,"pp. 1259-1264",2001,
"Hideo HIMENO,Sugailabinti SOID,Yuejia AN,Shigeki SATIO,Kunio TAKAHASHI,Tadao ONZAWA","Manipulation for Micro Joining",,"Proceedings of The 7th International Welding Symposium of The Japan Welding Society",,"Vol. 2",,"pp. 1251-1257",2001,
"Shigeru WATANABE,Shigeki SAITO,Kunio TAKAHASHI,Tadao ONZAWA","V-I Characteristics of Plasma in the Glow-to-arc Transition",,"Proceedings of The 7th International Welding Symposium of The Japan Welding Society",,"Vol. 1",,"pp. 95-100",2001,
"Kunio TAKAHASHI,Tadao ONZAWA","Temperature dependence of surface energy",,"Proceedings of The 7th International Welding Symposium of The Japan Welding Society",,"Vol. 2",,"pp. 1021-1026",2001,
"斎藤慎二,恩澤忠男","NI-Cu基ろうによるステンレス鋼ろう付継手の高温引張強度",,"溶接学会論文集",,"Vol. 19","No. 4","pp. 688-692",2001,
"渡辺茂,石山敬久,斎藤滋規,高橋邦夫,恩澤忠男","グロー／アーク遷移現象に及ぼす陰極加熱の影響",,"溶接学会全国大会講演概要",,"Vol. 69",,"pp. 294-295",2001,
"高橋邦夫,恩澤忠男","表面エネルギーの温度依存性",,"溶接学会全国大会講演概要",,"Vol. 69",,"pp. 248-249",2001,
"伊藤健彦,斎藤滋規,高橋邦夫,恩澤忠男","加圧力変動による界面拡散の促進効果の理論的検討",,"溶接学会全国大会講演概要",,"Vol. 67",,"pp. 304-305",2000,
"恩澤忠男","修正埋め込み原子法のシリコンクラスタ（Si2?Si10）に対する適応性",,"応用物理学会講演予稿集",,"Vol. 47",,"pp. 423",2000,
"Takahiro YAMAGISHI,Kunio TAKAHASHI,Tadao ONZAWA","Modified embeded atom method (MEAM) caluculations for reconstructed (110) surfaces of face centered cubic (FCC) metals",,"Surface Science",,"Vol. 445","No. 1","pp. 18-22",2000,
"Shinji SAITO,Takashi KAYAMOTO,Tadao ONZAWA","Impact toughness of stainless steel joints brazed with Ni-Cu based filler alloys",,"International Brazing & Soldering Conference Proceedings",,,,"pp. 190-195",2000,
"Takehiko ITO,Shigeki SAITO,Kunio TAKAHASHI,Tadao ONZAWA","A Method to simulate the interface-diffusion in solid-state bounding processes considering the elastic deformation",,"Material Research Society Symposium Proceeding",,"Vol. 653","No. z10","pp. 8.1-6",2000,
"恩澤忠男,雀部謙","ろう付，その技術変遷と課題",,"溶接学会誌",,"Vol. 69","No. 1","pp. 45-53",2000,
"苑暁迎,高橋邦夫,恩澤忠男","修正埋め込み原子法を非バルク系に適応する際の問題点に関する検討",,"溶接学会全国大会講演概要",,"Vol. 67",,"pp. 306-307",2000,
"高橋邦夫,斎藤滋規,浦郷正隆,持丸義弘,恩澤忠男","リサイクルを考慮したマイクロ接合体の構築方法",,"溶接学会全国大会講演概要",,"Vol. 67",,"pp. 158-159",2000,
"恩澤忠男　他多数","接合・溶接技術Q&A1000(分担)",,"産業技術サービスセンター","産業技術サービスセンター",,,,1999,
"Kunio TAKAHASI,Chikara NARA,Takahiro YAMAGISHI,Tadao ONZAWA","Calculation of surface energy and simulation of reconstruction for Si (111) 3X3, 5X5, 7X7, and 9X9 DAS structure",,"Applied Surface Science",,"Vol. 151","No. 3-4","pp. 299-301",1999,
"塚本文彦,日向輝彦,安田克彦,恩澤忠男","複合ワイヤガスメタルアーク溶接の溶接施工に関する研究",,"溶接学会論文集",,"Vol. 17","No. 3","pp. 413-419",1999,
"斎藤慎二,茅本隆司,恩澤忠男","Ni-Cu基ろうによるステンレス鋼ろう付継手の機械的特性",,"溶接学会論文集",,"Vol. 17","No. 1","pp. 35-40",1999,
"宮田隆司,牛尾誠夫,大城桂作,尾上久浩,恩澤忠男,豊田政男,西口公之,野村博一,広瀬衛,松田福久,和田宏一","溶接・接合技術入門(分担)",,"産報出版","産報出版",,,,1998,
"高橋邦夫,恩澤忠男","Effect of surface roughness on the heatless and pressureless bonding for low-energy precise processing",,"Journal of High Pressure Institute of Japan",,"Vol. 35","No. 3","pp. 159-164",1997,
"恩澤忠男　他１１名","溶接・接合技術概論(分担）",,"産報出版","産報出版",,,,1997,
"K.Takahashi,T.Onzawa,N.A.Burnham,H.M.Pollock","Stiffness of measurement system and significant figures of displacement which are required to interpret adhesional force curves",,"IEICE Transactions of Electronics",,"Vol. E80-C","No. 2","pp. 255-262",1997,
"恩澤忠男,飯山孝志,小林真一,高崎明人,氏本泰弘","爆接チタン一極使炭素鋼接合界面の透過電子顕微鏡観察",,"圧力技術",,"Vol. 35","No. 4","pp. 6-12",1997,
"水野亮二,高橋邦夫,恩澤忠男","Measurement of Adhesion force between Gold and Silicon",,"Quarterly Journal of the Japan Welding Society",,"Vol. 14","No. 3","pp. 523-526",1996,
"K.Takahashi,T.Onzawa","Effect of the stiffness of the measurement system on adhesion force curves in the elastic continuum limit",,"Journal of Adhesion Science and Technology",,"Vol. 10","No. 1","pp. 17",1996,
"R.Mizuno,K.Takahashi,T.Onzawa","Investigation of Adhesion Behavior by Measurement System Constructed in Auger Electron Spectroscope",,"Proceedings of The 6th International Welding Symposium of the Japan Welding Society","Proceedings of The 6th International Welding Symposium of the Japan Welding Society","Vol. 2",,"pp. 707",1996,
"茅本隆司,斎藤慎二,小楠真弘,恩澤忠男","Al-Ge-Cu基ろうを用いた2017アルミニウム合金の真空ろう付",,"溶接学会論文集",,"Vol. 14","No. 1","pp. 63-68",1996,
"K.Takahashi,Onzawa","Adhesion of elastic continuum and criterion for perfect contact",,"Proceeding of 8th Japan Institute Metals International Symposium","Proceeding of 8th Japan Institute Metals International Symposium",,,"pp. 173",1996,
"茅本隆司,恩澤忠男","アルミニウム合金用低融点ろうの開発",,"軽金属溶接",,"Vol. 33","No. 10","pp. 471-478",1995,
"茅本隆司,金鐘勲,斎藤慎二,恩澤忠男","Ge含有アルミニウムろうによるAl-Mg,Al-Mg-Si合金のろう付",,"溶接学会論文集",,"Vol. 13","No. 4","pp. 495-501",1995,
"鈴村暁男,恩澤忠男,山崎敬久,高橋邦夫","ダイヤモンドの活性金属ろう付界面組織とその形成過程",,"溶接学会論文集",,"Vol. 13","No. 1","pp. 39-45",1995,
"日向輝彦,安田克彦,春日幸生,恩澤忠男","Penetration form of DC-TIG are welding using flax cored wire for filler metal.",,"Quarterly Journal of the Japan Welding Society",,"Vol. 13","No. 2","pp. 228-232",1995,
"恩澤忠男　他多数","新版接合技術総論(分担)",,"産業技術サービスセンター","産業技術サービスセンター",,,,1994,
"K.Takahashi,T.Onzawa,T.Iiyama,N.Katoh","Instrument for the measurement of adhesion forces in ultrahigh vacuum surface analysis apparatuses",,"Journal of Vacuum Science and technology",,"Vol. 12","No. 3","pp. 889-891",1994,
"鈴村暁男,恩澤忠男,山崎敬久,高橋邦夫","Solidification phenomena and banding strength at the interface of diamond and active-metal-brazing-filler",,"Quarterly Journal of the Japan Welding Society",,"Vol. 12","No. 4","pp. 509-514",1994,
"茅本隆司,金鐘勲,斎藤慎二,恩澤忠男","Brazing of Al-Mg alloy and Al-Mg-Si Alloy with Al-Ge based filler metal",,"Quarterly Journal of the Japan Welding Society",,"Vol. 12","No. 4","pp. 495-501",1994,
"日向輝彦,安田克彦,春日幸生,TADAO ONZAWA","Penetration form and welding of practical joint using traveling TIG arc",,"Quarterly Journal of the Japan Welding Society",,"Vol. 12","No. 1","pp. 58-63",1994,
"恩澤忠男,松忠男,雀部謙","ろう付Q&A",,"溶接技術",,"Vol. 42","No. 7","pp. 53-82",1994,
"K.Takahashi,T.Onzawa","Simple formula for surface energy by a shifted-step-potential approximation",,"Physical Review B",,"Vol. 48","No. 8","pp. 5688-5691",1993,
"尾上久浩,恩澤忠男,野村博一,酒井芳也,豊田政男,安岡俊樹","溶接・接合技術(分担)",,"産報出版","産報出版",,,,1993,
"石井勇五郎　他１４名,恩澤忠男","新版非破壊検査工学(分担)",,"産報出版","産報出版",,,,1993,
"恩澤忠男","高エネルギー速度加工(分担)",,"コロナ社","コロナ社",,,,1993,
"日向輝彦,安田克彦,春日幸生,恩澤忠男","静止TIGアークによる溶込み形態の検討",,"溶接学会論文集",,"Vol. 10","No. 3","pp. 37-43",1992,
"恩澤忠男,鈴村暁男,金鐘勲,坂井","SiC(CVD)繊維強化チタン金属基複合材料の疲労特性",,"溶接学会論文集",,"Vol. 10","No. 4","pp. 71-76",1992,
"恩澤忠男　他多数","標準マイクロソルダリング技術(分担)",,"日刊工業新聞社","日刊工業新聞社",,,,1992,
"恩澤忠男　他多数","精密工学会編:新版精密工学便覧(分担)",,"コロナ社","コロナ社",,,,1992,
"恩澤忠男　他１２名","ステンレスクラッド鋼の熱処理技術指針",,"圧力技術",,"Vol. 30","No. 1","pp. 42-54",1992,
"恩澤忠男　他６名","クラッド鋼溶接の実際(共著)",,"産報出版","産報出版",,,,1992,
"恩澤忠男,鈴村暁男,金鐘勲","Joining of Titanium-Matrix Composites Reinforced with SiC-CVD Fiber",,"Quarterly Journal of The Japan Welding Society",,"Vol. 9","No. 4","pp. 117-122",1991,
"恩澤忠男,福田隆,大尾和彦,原修一,亀山龍一郎","ステンレスクラッド鋼の接合強度評価法について",,"圧力技術",,"Vol. 29","No. 5","pp. 37-54",1991,
"恩澤忠男　他多数","溶接学会編:溶接・接合便覧(分担)",,"丸善","丸善",,,,1990,
"T.Onzawa,A Suzumura,M.W.Ko","Brazing of Titanium Using Low-Melting-Point Ti-Based Filler Metals",,"Welding Journal",,"Vol. 69","No. 12","pp. 462s-467s",1990,
"恩澤忠男,鈴村暁男,金鐘勲","Filament/Matrix Interaction of Titanium-Matrix Composites Reinforced with SiC Fiber",,"Quarterly Journal of The Japan Welding Society",,"Vol. 8","No. 2","pp. 122-128",1990,
"恩澤忠男,鈴村暁男,金鐘勲","Relation between Reaction Zone Thickness and Teusile Strength in Titanium Matrix Composites Reinforced with SiC Fiber.",,"Quarterly Journal of The Japan Welding Society",,"Vol. 8","No. 4","pp. 74-78",1990,
"恩澤忠男,鈴村暁男,高明玩","Braziability of High Purity Alumina to Titanium Using Ti-Zr Base Filler Metals.",,"Quarterly Journal of The Japan Welding Society",,"Vol. 7","No. 1","pp. 124-129",1989,
"恩澤忠男　他多数","圧力技術の現状と展望(分担)-クラッド鋼-",,"日本高圧力技術協会","日本高圧力技術協会",,,,1989,
"恩澤忠男,高崎明人","Effect of Molybdenum on Low Temperature Toughness of Austenitic stainless Steel Weld Metals.",,"Quarterly Journal of The Japan Welding Society",,"Vol. 6","No. 2","pp. 82-88",1988,
"鈴村暁男,恩澤忠男,ﾌﾞﾃﾞｨ･ｺﾊﾙ","セラミックスと金属の摩擦圧接機構",,"高温学会誌",,"Vol. 14","No. 5","pp. 201-",1988,
"鈴村暁男,恩澤忠男　他","セラミックスとアルミニウムの摩擦圧接",,"高温学会誌",,"Vol. 13","No. 1","pp. 43-",1987,
"田村博,恩澤忠男,高崎明人","SUS308L溶接金属の低温じん性に及ぼすδフェライトの影響",,"溶接学会論文集",,"Vol. 5","No. 4","pp. 511-",1987,
"田村博,恩澤忠男,高崎明人","SUS316L溶接金属の再熱によるM23C6及びσフェライトの影響",,"溶接学会論文集",,"Vol. 5","No. 4","pp. 511-",1987,
"恩澤忠男,鈴村暁男,村田恭夫","Notch Toughness of Brazed Joints with Au base filler and Ni base Amorphous filler.",,"Quarterly Journal of The Japan Welding Society",,"Vol. 4","No. 1","pp. 187-",1986,
"T.Onzawa,A.Takasaki","Effect of δ-ferrite on Low Temperature Toughness of Type 316L Austenite Stainless Steel Weld Metal.",,"Trans. JWS",,"Vol. 17","No. 1","pp. 44-",1986,
"T.Onzawa,H.Tamura,A.Takasaki,T.Takatori","Effect of δ-ferrite n Low Temperature Toughness of Type 316L Austenite Stainless Steel Weld Metal.",,"Transaction of JWS",,"Vol. 17","No. 1","pp. 44-",1986,
"鈴村暁男,恩澤忠男,田村博","液相拡散接合性に及ぼすインサート金属のアモルファス化の効果",,"溶接学会論文集",,"Vol. 3","No. 2","pp. 85-",1985,
"恩澤忠男,松忠男,田中政直","ろう付・はんだ付入門",,"産報出版(株)","産報出版(株)",,,,1983,
"T.Onzawa,Y.Ishii","Fundamental Studies on Explosive Welding.",,"Welding Research Abroad",,"Vol. 23","No. 3","pp. 28-",1977,
"恩澤忠男　他多数","ステンレスクラッド鋼に関する総合的研究",,"圧力技術",,"Vol. 15","No. 1","pp. 2-",1977,
"恩澤忠男,鈴村暁男,畠山耕太郎","拡散接合性に及ぼすインサートメタルの研究",,"溶液学会誌",,"Vol. 45","No. 8","pp. 57-",1976,
"恩澤忠男","爆発圧接に関する基礎的研究",,,,,,,1973,Feb.
"T.Onzawa,Y.Ishii","Study on Wave Formation in Explosive Bonding",,"Trans. JWS",,"Vol. 4","No. 2","pp. 101-",1973,