"奥山紘章,井関日出男,大竹尚登","金属ドープアモルファス炭素膜の合成と電気的特性評価","第24回ダイヤモンドシンポジウム","第24回ダイヤモンドシンポジウム講演要旨集","ニューダイヤモンドフォーラム",,,"pp. 80-81",2010,Nov.
"井関日出男","２段逐次成形によるフランジ付円筒カップのひずみ分布","第５９回塑性加工連合講演会","第５９回塑性加工連合講演会講演論文集","（社）日本塑性加工学会",,,"pp. 17-18",2008,Nov.
"Hideo Iseki","A Strain Distribution Analysis in Multistage Incremental Forming of Cylindrical Cup with Flange","The 9th International Conference on Technology of Plasticity","Proceedings of the 9th International Conference on Technology of Plasticity",,,,"pp. 675-680",2008,Sept.
"井関日出男","２段遂次成形によるフランジ付き円筒カップの近似変形解析","平成２０年度塑性加工春季講演会","平成２０年度塑性加工春季講演会講演論文集","ニッセイエブロ株式会社",,,"pp. 327-328",2008,May
"井関日出男,村上碩哉,藤井祐輔","ウォータジェットとショットを用いた薄板遂次張出し成形（第４報,張出し変形に及ぼすショットの影響）","平成２０年度塑性加工春季講演会","平成２０年度塑性加工春季講演会講演論文集","ニッセイエブロ株式会社",,,"pp. 329-330",2008,May
"井関日出男","最新 機械機器要素技術（分担）",,,"ＮＧＴコーポレーション",,,,2008,Apr.
"井関日出男,大城健司,村上碩哉","ウォータジェットとショットを用いた薄板逐次張出し成形（第３報、ステンレス鋼板の成形限界）","平成19年度塑性加工春季講演会","平成19年度塑性加工春季講演会講演論文集",,,,"pp. 203-204",2007,May
"Hideo Iseki,Tomoyuki Nara","Incremental Bulging of Sheet Metal Using Water Jet and Shots","12th International Conference of SHHET METAL 2007","Proceedings of the 12th International Conference of SHHET METAL 2007","Trans Tech Publications Ltd",,,"page 575-582",2007,Apr.
"Hideo Iseki,Tomoyuki Nara","Incremental Bulging of Sheet Metal Using Water Jet and Shots",,"Key Engineering Materials",,"Vol. 344",,"pp. 575-582",2007,
"井関日出男","薄板インクリメンタルフォーミングの最新動向","日本機械学会中国四国支部技術フォーラム（第98回講習会）","日本機械学会中国四国支部",,,,"pp. 13-16",2006,Dec.
"井関日出男,奈良知幸,村上碩哉","ウォータジェットとショットを用いた薄板逐次張出し成形 （第２報、ステンレス鋼板の成形特性）","第57回塑性加工連合講演会講演論文集","(社)日本塑性加工学会",,,,"pp. 395-396",2006,Nov.
"井関日出男","板材成形（成形プロセスの理論解析・数値解析）の年間展望",,"日本塑性加工学会論文集(塑性と加工)",,"Vol. 47","No. 547","pp. 727",2006,Aug.
"井関日出男","塑性力学（基礎理論）の年間展望",,"日本塑性加工学会論文集（塑性と加工）",,"Vol. 47","No. 547","pp. 3-4",2006,Aug.
"井関日出男ほか２０５人","塑性加工便覧（分担）",,,"コロナ社",,,"pp. 1010-1011",2006,May
"井関日出男,奈良知幸,村上碩哉","ウォータジェットとショットを用いた薄板逐次張出し成形法","平成18年度塑性加工春季講演会講演論文集","(社)日本塑性加工学会",,,,"pp. 299-300",2006,May
"井関日出男","薄板のインクリメンタルフォーミング（逐次成形）","第61回金属プレス加工技術研究会","(社)日本金属プレス工業協会",,,,"pp. 21-29",2006,Apr.
"相田収平,坂井修,井関日出男","マグネシウム合金の逐次張出し成形","第56回塑性加工連合講演会","第56回塑性加工連合講演会講演論文集",,,,"pp. 133-134",2005,Nov.
"井関日出男","薄板のウォータジェットによる逐次張出しの近似変形解析法","第56回塑性加工連合講演会","第56回塑性加工連合講演会講演論文集",,,,"pp. 483-484",2005,Nov.
"Osamu Sakai,Shuhei Aida,Takao Goto,Kentarou Magara,Hideo Iseki","Development of an incremental forming center for sheet metal","Advanced technology of plasticity 2005","Proceedings of the 8th International Conference on Technology of Plasticity",,,,"pp. 355-356 (CD-ROM,1-8p.).",2005,Oct.
"井関日出男","成形プロセスの理論解析・数値解析",,"塑性と加工",,"Vol. 46","No. 535","pp. 750",2005,Aug.
"井関日出男","塑性力学の基礎理論",,"塑性と加工",,"Vol. 46","No. 535","pp. 672-673",2005,Aug.
"井関日出男,西英隆,村上碩哉","ウォータジェットによる薄板逐次張出しの成形限界","平成17年度塑性加工春季講演会","平成17年度塑性加工春季講演会講演論文集",,,,"pp. 327-328",2005,May
"井関日出男,斉藤雅典","薄板のウォータジェット張出しにおける成形限界",,"平成16年度塑性加工春季講演会講演論文集",,,,"pp. 379-380",2004,
"井関日出男","成形プロセスの理論解析・数値解析",,"塑性と加工",,"Vol. 45","No. 523","pp. 66",2004,
"井関日出男","塑性力学の基礎理論",,"塑性と加工",,"Vol. 45","No. 523","pp. 3",2004,
"井関日出男,西英隆","薄板のウォータジェットによる逐次張出し成形限界の近似計算法",,"第55回塑性加工連合講演会講演論文集",,,,"pp. 9-10",2004,
"井関日出男","平板で圧縮と引張を受ける信楽陶土の接着強さ",,"平成16年度塑性加工春季講演会講演論文集",,,,"pp. 59-60",2004,
"相田収平,坂井修,宮口弘明,田中興一,井関日出男","AZ31マグネシウム合金のインクリメンタル張出し成形",,"平成15年度塑性加工春季講演会講演論文集",,,,"pp. 297-298",2003,
"井関日出男","成形プロセスの理論解析・数値解析",,"塑性と加工（日本塑性加工学会誌）",,"Vol. 44","No. 511","pp. 78",2003,
"井関日出男","信楽陶土への球状パンチ押し込みにおける変形復元現象",,"第54回塑性加工連合講演会講演論文集","第54回塑性加工連合講演会講演論文集",,,"pp. 503-504",2003,
"井関日出男","ウォータジェット張出しにおける薄板の成形特性",,"第54回塑性加工連合講演会講演論文集",,,,"pp. 39-40",2003,
"井関日出男","ろくろ成形のデジタルフォーミング化に関する基礎的研究（第２報、ボールローラ工具によるろくろ成形）",,"平成15年度塑性加工春季講演会講演論文集",,,,"pp. 291-292",2003,
"井関日出男","ウォータジェットによる薄板の逐次転写成形性",,"平成15年度塑性加工春季講演会講演論文集",,,,"pp. 299-300",2003,
"井関日出男","円弧断面帯板の単純曲げにおける座屈後挙動（第１報、エネルギー法による近似変形解析）",,"日本機械学会論文集(A編）",,"Vol. 69","No. 680","pp. 794-799",2003,
"Hideo Iseki,Takashi Naganawa","Vertical wall surface forming of rectangular shell using multistage incremental forming with spherical and cylindrical rollers",,"The 2nd International Conference on Advanced Forming and Die Manufacturing Technology",,,,"pp. 59-63",2002,
"井関日出男","曲線断面帯板の逐次曲げ成形法（第2報、硬質材への適用）",,"第53回塑性加工連合講演会講演論文集",,,,"pp. 247-248",2002,
"相田収平,坂井修,宮口弘明,田中興一,井関日出男","垂直壁を有する形状のインクリメンタル張出し成形",,"第53回塑性加工連合講演会講演論文集",,,,"pp. 233-234",2002,
"井関日出男","ウォータジェットによる薄板の逆逐次張出し成形法",,"第53回塑性加工連合講演会講演論文集",,,,"pp. 235-236",2002,
"井関日出男","ろくろ成形のデジタルフォーミング化に関する基礎的研究",,"第53回塑性加工連合講演会講演論文集",,,,"pp. 215-216",2002,
"井関日出男","加熱スリットダイスによる曲線断面帯板の引抜き曲げ成形（第2報、スプリングバックの検討）",,"第53回塑性加工連合講演会講演論文集",,,,"pp. 47-48",2002,
"井関日出男,村上碩哉,細野慎太朗","曲線断面帯板の逐次曲げ成形法",,"平成14年度塑性加工春季講演会講演論文集",,,,"pp. 379-380",2002,
"井関日出男","加熱スリットダイスによる曲線断面帯板の引抜き曲げ成形法",,"平成14年度塑性加工春季講演会講演論文集",,,,"pp. 377-378",2002,
"井関日出男","引抜き曲げ成形による円弧断面帯板の座屈疲労試験",,"平成14年度塑性加工春季講演会講演論文集",,,,"pp. 107-108",2002,
"Hideo Iseki","A Theoretical and Experimental Study of An Incremental Sheet Metal Bulging Using A Few Spherical Rollers",,"Proceedings of the 7th International Conference on Technology of Plasticity(2002)",,"Vol. 2",,"pp. 1615-1620",2002,
"H. Iseki,T. Naganawa","Vertical wall surface forming of rectangular shell using multistage incremental forming with spherical and cylindrical rollers",,"Journal of Materials Processing Technology",,,"No. 130-131","pp. 675-679",2002,
"Hideo Iseki","Simplified FEM simulation of curl distortion in stereo-lithograpy with scanning laser beam",,"Proceedings of 7th international conference on numerical methods in industrial forming processes",,,,"pp. 167-171",2001,
"Hideo Iseki","Flexible and incremental bulging of sheet metal using high-speed water jet",,"JSME International Journal, Series C",,"Vol. 44","No. 2","pp. 486-493",2001,
"Hideo Iseki","Rapid and flexible shell forming of radiation curable polymers using pneumatic structures",,"4th international ESAFORM conference on material forming",,"Vol. 2",,"pp. 373-376",2001,
"井関日出男,谷口信人","分割スリットダイスによる曲線断面帯板の引抜き曲げ成形",,"平成13年度塑性加工春期講演会講演論文集",,,,"pp. 355-356",2001,
"Hideo Iseki","An approximate deformation analysis and FEM analysis for the incremental bulging of sheet metal using a spherical roller",,"Journal of Materials Processing Technology",,,"No. 111","pp. 150-154",2001,
"井関日出男","ウォータジェットによる薄板のインクレメンタルフォーミング",,"塑性と加工",,"Vol. 42","No. 489","pp. 996-1000",2001,
"井関日出男,北澤君義","２１世紀のインクリメンタルフォーミング",,"塑性と加工",,"Vol. 42","No. 489","pp. 984-990",2001,
"井関日出男,細野慎太郎","分割円錐面スリットダイスによる曲線断面帯板の引抜き曲げ成形",,"第５２回塑性加工連合講演会講演論文集",,,,"pp. 225-226",2001,
"Hideo Iseki","Determination methods of optimum blank shapes with the object of net shape forming of deep drawing cup",,"Proceedings of International Conference on Processing & Manufacturing of Advanced Materials",,,,"pp. 488-493",2001,
"井関日出男","円錐面スリットダイスによる曲線断面帯板の引抜き曲げ成形法",,"第51回塑性加工連合講演会講演論文集",,,,"pp. 51-52",2000,
"Hideo Iseki","An experimental and theoretical study of a forming limit curve in incremental forming of sheet metal using spherical roller",,"Proceedings of the 8th international conference on metal forming",,,,"pp. 557-562",2000,
"井関日出男","金属薄板の逐次張出し成形における破断について",,"日本塑性加工学会・69回塑性力学分科会ミニ・シンポジウム予稿集",,,,"pp. 1-11",2000,
"井関日出男","逐次張出し成形における変形限界線の塑性不安定理論による検討",,"平成12年度塑性加工春季講演会講演論文集",,,,"pp. 311-312",2000,
"井関日出男,川原卓也,加藤和典","曲線スリット工具による帯板の引き抜曲げ成形（第４報、反りに及ぼす多段スリットダイスの影響）",,"平成12年度塑性加工春季講演会講演論文集",,,,"pp. 121-122",2000,
"井関日出男","曲線スリット工具による帯板の引き抜曲げ成形法（第５報、２段スリットダイスによる反り変形の防止法）",,"第８回機械材料・材料加工技術講演会講演論文集",,,"No. 00-36","pp. 157-158",2000,
"Hideo Iseki","Determination methods of optimum blank shape with the object of net shape forming of deep drawing cup",,"Abstracts of international conference on processing & manufacturing of advanced materials",,,,"pp. 100",2000,
"井関日出男","薄板の液圧張出しと噴流張出しの実験的研究",,"平成12年度塑性加工春季講演会講演論文集",,,,"pp. 443-444",2000,
"井関日出男","わかりやすいプレス加工（分担）",,"日刊工業新聞社","日刊工業新聞社",,,,2000,
"井関日出男,川原卓也,加藤和典","曲線スリット工具による帯板の引抜き成形（第３報、反りに及ぼすスリットダイスや形材料特性の影響）",,"第５０回塑性加工連合講演会講演論文集",,,,"pp. 465-466",1999,
"井関日出男","ボールローラによる逐次張出し成形の近似変形解析",,"第５０回塑性加工連合講演会講演論文集",,,,"pp. 183-184",1999,
"井関日出男,高橋佳希,加藤和典","曲線スリット工具による帯板の引抜き成形（第２報、スリット形状および材料特性の影響）",,"平成１１年度塑性加工春季講演会講演論文集",,,,"pp. 221-222",1999,
"Hideo ISEKI","A Simple Deformation Analysis for Incremental Bulging of Sheet Metal Using High Speed Water Jet",,"Advanced Technology of Plasticity Plasticity (6th ICTP),",,"Vol. 2","No. 2","pp. 1483-1488",1999,
"Hideo ISEKI","An Approximate Deformation Analysis and FEM Analysis  for Incremental Bulging of Sheet Metal  Using Spherical Roller",,"International Symposium on Advanced Forming  and Die Manufacturing Technology(AFDM'99)",,,,"pp. 501-506",1999,
"井関日出男","円弧断面帯板の座屈疲労試験",,"日本機械学会第７回機械材料・材料加工技術講演会講演論文集",,,"No. 99-23","pp. 69-70",1999,
"井関日出男","曲線断面帯板の純粋曲げにおける座屈後挙動",,"日本機械学会材料力学部門講演会講演論文集",,,"No. 99-16","pp. 801-802",1999,
"井関日出男","Flexible and Incremental Bulging of Sheet Metal using High Speed Water Jet (5th Report)",,"The Proceedings of the 48th Japanese Joint Conference for the Technology of Plasticity",,,,"pp. 125",1997,
"井関日出男,Robert SOWERBY","On the Determination of the Optimum Blank Shape of a Drawn Cup by the Finite Element Method (13th Report)",,"The Proceedings of the 48th Japanese Joint Conference for the Technology of Plasticity",,,,"pp. 101-102",1997,
"井関日出男,Robert SOWERBY","Simplified determination of optimum blank shape for prismatic cups by inverse finite-element procedure",,"The Proceedings of the 1996 Japanese Spring Conference",,,,"pp. 88-89",1996,
"井関日出男,百瀬良太,加藤和典","Development of metallic and ceramic particles reinforced radiation curable polymers of stereo-lithography",,"The Proceedings of the 1996 Japanese Spring Conference",,,,"pp. 16-17",1996,
"井関日出男","Analytical Methods of Incremental Forming of Sheet Metal",,"Journal of the Japan Society for Technology of Plasticity",,"Vol. 37","No. 431","pp. 1276-1282",1996,
"Hideo ISEKI,Tokimune SHIOURA,Kazuo SATO","Practical Development of Press-Molding Machine with Small Punching Tool",,"Advanced Technology of Plasticity 1996",,"Vol. 2",,"pp. 935-938",1996,
"井関日出男,長縄　尚,加藤和典","Vertical Wall Surface Forming of Rectangular Shell Using Multistage Incremental Forming with Spherical and Cylindrical Rollers",,"Transactions of the JSME",,"Vol. 62","No. 596","pp. 1600-1605",1996,
"井関日出男","On Rapid Prototyping and Manufacturing Using Stereolithography",,"Journal of Japan Association of Automation Advancement",,"Vol. 25","No. 1","pp. 3-8",1996,
"井関日出男","ウォータージェットによるフレキシブルな薄板逐次張出し成形",,"平成7年度塑性加工春季講演会講演論文集",,,,"pp. 213-214",1995,
"井関日出男","空気膜構造と紫外線硬化樹脂を用いたフレキシブルなシェル成形",,"平成7年度塑性加工春季講演会講演論文集",,,,"pp. 371-372",1995,
"Hideo ISEKI,Robert SOWERBY","Simplified Determination of Optimum Blank Shape and Limiting Ratio by Inverse Finite-Element Prosedure",,"JSME,International Journal (Series A)",,"Vol. 38","No. 4","pp. 473-479",1995,
"井関日出男,佐藤典永","光造形における反り変形の簡易FEMシミュレーション",,"第45回塑性加工連合講演会講演論文集",,,,"pp. 117-118",1994,
"井関日出男,久門　統","Forming Limit of Incremental Sheet Metal Stretch Forming Using Spherical Rollers",,"Journal of the Japan Society for Technology of Plasticity",,"Vol. 35","No. 406","pp. 1337-1342",1994,
"井関日出男,Robert SOWERBY","Conventional Determination of Optimum Blank Shape and Limiting Drawing Ratio by Inverse Finite-Element Procedure",,"Transactions of JSME",,"Vol. 60","No. 574","pp. 1437-1443",1994,
"井関日出男","Flexible Sheet Metal Forming Using Universal Press with Multiple Piston Heads",,"Journal of the Japan Society for Technology of Plasticity",,"Vol. 35","No. 406","pp. 1264-1269",1994,
"Hideo ISEKI,Kazunori KATO,Seichirou SAKAMOTO","Forming Limit of Flexible and Incremental Sheet Metal Bulging With a Spherical Roller",,"Advanced Technology of Plasticity 1993",,"Vol. 3",,"pp. 1635-1640",1993,
"Hideo ISEKI,Robert SOWERBY","A Method for Evaluating Limiting Drawing Ratio",,"Journal of Materials Engineering and Performance(ASM International)",,"Vol. 2","No. 1","pp. 107-112",1993,
"井関日出男,加藤和典,久門　統","Flexible and Inclemental Sheet Metal Bulging Using a Few Spherical Rollers",,"Transactions of the JSME",,"Vol. 59","No. 565","pp. 2849-2854",1993,
"金　大慶,加藤和典,井関日出男","Finite Element Analysis of Forming Property in Plastic Flow Joining Process",,"Journal of the JSTP",,"Vol. 34","No. 395","pp. 1338-1343",1993,
"井関日出男,室田忠雄,加藤和典,高橋始","最適ブランク形状の限界絞り比",,"日本機械学会論文集(C編)",,"Vol. 58","No. 548","pp. 1327-1332",1992,
"井関日出男,加藤和典,坂本誠一郎","Flexible and Incremental Sheet Metal Bulging Using a Path-Controlled Spherical Roller",,"Transactions of the JSME",,"Vol. 58","No. 554","pp. 3147-3155",1992,
"井関日出男","材料加工の計算力学（分担）",,"コロナ社","コロナ社",,,,1992,
"井関日出男,室田忠雄,加藤和典,林　茂夫","二軸引張りを受ける金属多孔板の成形限界",,"日本機械学会論文集(A編)",,"Vol. 55","No. 512","pp. 994-999",1989,
"Hideo ISEKI,Robert SOWERBY","A Theoretical and Experimental Study of a Curved Strip Compressed by a Flat Plate",,"Trans,ASME J. Appl. Mech.",,"Vol. 56","No. 1","pp. 96-104",1989,
"井関日出男,Robert SOWERBY","多目的最適化理論の妥協解の最大成分最小化法による再絞り比の算出法",,"日本機械学会論文集(C編)",,"Vol. 54","No. 508","pp. 3115-3120",1988,
"井関日出男,室田忠雄,加藤和典","円筒再絞り加工の数値シミュレーションによる再絞り比の算出法について",,"日本機械学会論文集(C編)",,"Vol. 52","No. 480","pp. 2257-2264",1986,
"井関日出男,室田忠雄","有限要素法による深絞りのブランクの決定法について",,"日本機械学会論文集(C)編",,"Vol. 51","No. 467","pp. 1621-1628",1985,
"Hideo ISEKI,Tadao Murota","Analysis of Deep Drawing of Non-Axisymmetric Cup by the Finite Element Method",,"Advanced Technology of Plasticity 1984",,"Vol. 1",,"pp. 678-684",1984,
"Hideo ISEKI,Tadao MUROTA,Takashi JIMMA","Finite Element Method in the Analysis of the Hydrostatic Bulging of a Sheet Metal(Part2)",,"Bulletin of JSME",,"Vol. 20","No. 141","pp. 285-291",1976,
"井関日出男","金属板の液圧張り出し変形に関する塑性力学的研究",,,,,,,1976,
"Hideo ISEKI,Takashi JIMMA,Tadao MUROTA","Finite Element Method of Analysis of the Hydrostatic Bulging of a Sheet Metal(Part1)",,"Bulletin of the JSME",,"Vol. 17","No. 112","pp. 1240-1246",1974,
"井関日出男","金属板の塑性曲げに関する塑性力学的研究",,,,,,,1970,