"Peimin Xu,Kazuaki Inaba,Hisami Takeishi,Toshiharu Kagawa","FEASIBILITY AND OPTIMIZATION OF NOZZLE FLAPPER SYSTEM FOR POSITION  MEASUREMENTS OF HIGH-SPEED ROTATION SPINDLE WITH AEROSTATIC BEARINGS","Pressure Vessels & Piping Conference",,,,,,2023,Nov.
"Peimin Xu,Hisami Takeishi,Kazuaki Inaba,Toshiharu Kagawa","Static Characteristic Analysis of Multi-hole Nozzle Flapper Systems","16th International Conference on Fluid Control, Measurements, and Visualization",,,,,,2023,Nov.
"Peimin XU,Hisami TAKEISHI,Kazuaki INABA,Toshiharu KAGAWA","Multi-hole nozzle for position measurements of high-speed rotation air spindle","日本フルードパワーシステム学会",,,,,,2022,Nov.
"Jiehong Peng,Kotaro Tadano,Hisami Takeishi,Toshiharu Kagawa","A volume measurement method for pneumatic pressure vessels using compressed-air discharge",,"Measurement Science and Technology",,"Volume 32","Number 6",,2021,Mar.
"Jongha LIM,Kohei IIDA,Kotaro TADANO,Toshiharu KAGAWA","Experimental Study on Energy Efficiency of Pneumatic Booster Valves with Energy Recovery",,"JFPS International Journal of Fluid Power System",,"Vol. 13","No. 1","pp. 1-8",2020,June
"Jongha LIM,Kohei IIDA,Kotaro TADANO,Toshiharu KAGAWA","The Impact of Geometric Design on Energy Efficiency of Pneumatic Booster Valves with Energy Recovery",,"International Journal of Mechanical Engineering and Robotics Research",,"Vol. 9","No. 5","pp. 665-672",2020,May
"Jongha Lim,Kotaro Tadano,Toshiharu Kagawa","The Impact of Geometric Design on Energy Efficiency of Pneumatic Booster Valves with Energy Recovery","4th International Conference on New Energy and Applications",,,,,,2019,Nov.
"Hisami Takeishi,Kotaro Tadano,Toshiharu Kagawa","Measurement of Unsteady Flow Utilizing Orifice Flow Meter","Proceedings of International Conference on Fluid Control, Measurements and Visualization",,,,,,2019,May
"飯田 航平,小林 敏也,只野 耕太郎,蔡 茂林,藤田 壽憲,肖 鋒,香川 利春","等温化放出法を用いた圧縮性流体用機器の流量特性試験法において大気圧の変化が及ぼす影響の考察",,"日本フルードパワーシステム学会論文集",,"Vol. 50","No. 1","p. 25-30",2019,May
"Jongha Lim,Kohei Iida,Kotaro Tadano,Toshiharu Kagawa","Numerical Analysis and Experimental Validation on Energy Efficiency of Pneumatic Booster Valves with Energy Recovery","15th International Conference on Fluid Control, Measurements and Visualization","Proceedings of International Conference on Fluid Control, Measurements and Visualization",,,,,2019,May
"林鍾何,飯田航平,只野耕太郎,香川利春","エネルギ回収型増圧器の効率向上に関する実験的研究","平成30年秋季フルードパワーシステム講演会","平成30年秋季フルードパワーシステム講演会講演論文集","日本フルードパワーシステム学会",,,"pp. 19-21",2018,Oct.
"飯田航平,小林敏也,只野耕太郎,蔡茂林,藤田 壽憲,肖 鋒,香川 利春","等温化放出法を用いた圧縮性流体用機器の流量特性試験法において大気圧変動が及ぼす影響の考察","平成30年春季フルードパワーシステム講演会","平成30年春季フルードパワーシステム講演会 講演論文集",,,,"p. 10-12",2018,May
"林鍾何,飯田航平,只野耕太郎,香川利春","エネルギ回収型増圧器の効率に関する実験的研究","平成30年春季フルードパワーシステム講演会","平成30年春季フルードパワーシステム講演会論文集","日本フルードパワーシステム学会",,,"pp. 7-9",2018,May
"J Peng,C Youn,K Tadano,T Kagawa","Pressure Response of Various Gases in a Pneumatic Resistance Capacitance System and Pipe",,"IOP Conference Series: Materials Science and Engineering",,"Vol. 249","No. 1",,2017,Oct.
"林 鐘何,飯田航平,只野耕太郎,香川利春","エネルギ回収型増圧器に関する実験と考察","第25回フルードパワー国際見本市","第25回ﾌﾙｰﾄﾞﾊﾟﾜｰ国際見本市カレッジ研究発表展示コーナー論文集","日本フルードパワーシステム学会",,,"pp. 35-36",2017,Sept.
"Fan Yang,Kotaro Tadano,Gangyan Li,Toshiharu Kagawa","Analysis of the Energy Efficiency of a Pneumatic Booster Regulator with Energy Recovery",,"applied sciences",,"Vol. 7",,,2017,Aug.
"楊 凡,chong Ho Youn,KOTARO TADANO,TOSHIHARU KAGAWA","Analysis on energy efficiency of booster valve with energy recovery","The Proceedings on Autumn Conference of Japan Fluid Power System Society 2016","平成28年秋季ﾌﾙｰﾄﾞﾊﾟﾜｰｼｽﾃﾑ講演会講演論文集","一般社団法人日本フルードパワーシステム学会",,,"pp. 59-61",2016,Oct.
"Fan Yang,Kotaro Tadano,Gangyan Li,Toshiharu Kagawa,Jiehong Peng","Simulation on the Characteristics of Pneumatic Booster Valve with Energy Recovery","2016 International Simulation Multi-Conference","Theory, Methodology, Tools and Applications for Modeling and Simulation of Complex Systems",,,,"pp. 143-153",2016,Oct.
"菅野 直樹,尹 鍾晧,只野 耕太郎,香川 利春,右田 雅彦,植村 功","チャンバ法による弾性体の漏れ計測に関する研究","平成28年秋季フルードパワーシステム講演会","平成28年秋季フルードパワーシステム講演会論文集","一般社団法人日本フルードパワーシステム学会",,,"pp. 56-58",2016,Oct.
"Fan Yang,Kotaro Tadano,Gangyan Li,Toshiharu Kagawa","Dimensionless Analysis on the Characteristics of Pneumatic Booster Valve with Energy Recovery",,"Mathematical Problems in Engineering","Hindawi Publishing Corporation","Volume 2016",,,2016,Sept.
"Fan Yang,Kotaro Tadano,Gangyan Li,Toshiharu Kagawa","Characteristics Analysis of Pneumatic Booster Valve With Energy Recovery","BATH/ASME 2016 Symposium on Fluid Power and Motion Control",,,,,"pp. V001T01A016",2016,Sept.
"菅野 直樹,尹 鍾晧,只野 耕太郎,香川 利春","充填と放出される空気の温度による空気圧容器内の圧力と温度変化に関する考察","平成28年春季フルードパワーシステム講演会","平成28年春季フルードパワーシステム講演会講演論文集","一般社団法人日本フルードパワーシステム学会",,,"pp. 93-95",2016,May
"楊 凡,尹 鍾晧,只野 耕太郎,香川 利春","空気圧シリンダのメータアウト速度制御における温度変化に関する研究","平成28年春季フルードパワーシステム講演会","平成28年春季フルードパワーシステム講演会講演論文集","一般社団法人日本フルードパワーシステム学会",,,"pp. 65-67",2016,May
"ジン ジョンフン,尹 鍾晧,只野 耕太郎,香川 利春","小型空気圧ピンチバルブ用シリコンチューブの微圧における流量特性","平成28年春季フルードパワーシステム講演会","平成28年春季フルードパワーシステム講演会講演論文集","一般社団法人日本フルードパワーシステム学会",,,"pp. 62-64",2016,May
"Shaofei Wang,KAIJI SATO,Toshiharu Kagawa","Precise Positioning of Pneumatic Artificial Muscle Systems",,"Journal of Flow Control, Measurement & Visualization","Scientific Research Publishing Inc.","vol. 2","no. 4","pp. 138-153",2014,Oct.
"Xin Li,Mikio Horie,Toshiharu Kagawa","Pressure-Distribution Methods for Estimating Lifting Force of Swirl Gripper",,"IEEE/ASME TRANSACTIONS ON MECHATRONICS",,"Vol. 19","No. 2","pp. 707-718",2014,Apr.
"江航傑,只野耕太郎,川嶋健嗣,香川利春","空気圧駆動手術ロボットにおける温度感覚を用いた力提示に関する研究","平成25年秋季フルードパワーシステム講演会","平成25年秋季フルードパワーシステム講演会講演論文集",,,,"pp. 76-78",2013,Nov.
"矢島拓実,只野耕太郎,川嶋健嗣,香川利春","指先への空気噴流刺激を用いた手術ロボットの操作性向上","平成25年秋季フルードパワーシステム講演会","平成25年秋季フルードパワーシステム講演会講演論文集",,,,"pp. 91-93",2013,Nov.
"大川陽一,村山拓人,飯尾昭一郎,尹鍾晧,香川利春","平行二円板間内向き流れの可視化",,"可視化情報学会論文集",,"Vol. 32","No. 6","pp. 9-14",2013,Oct.
"chong Ho Youn,Yoshinari Nakamura,Toshiharu KAGAWA","Development of a Low Noise Pressure Reducing Valve for High Pressure Hydrogen Using a Radial Slit Structure","Bath/ASME Symposium on Fluid Power & Motion Control (FPMC 2012)",,,,,,2013,Sept.
"Xin Li,Yoshihiro Nakamura,Mikio Horie,Toshiharu Kagawa","An Experimental Investigation on the Flotation Transport of a Glass Substrate Using Vortex Bearing Elements",,"Journal of Flow Control, Measurement & Visualization",,"Vol. 1",,"pp. 6-12",2013,Apr.
"Xin Li,MIKIO HORIE,TOSHIHARU KAGAWA","Study on the basic characteristics of a vortex bearing element",,"International Journal of Advanced Manufacturing Technology",,"Vol. 64","  Issue 1-4","pp. 1-12",2013,Jan.
"藤野謙司,尹鍾晧,山本円朗,谷口宏次,山本寛,伊藤正彦,リシン,香川利春","鉄道車両用真空式トイレにおける真空特性と消費エネルギーに関する研究",,"日本フルードパワーシステム学会論文集",,"Vol. 44","No. 1",,2013,Jan.
"Jun Li,Kenji Kawashima,Kotaro Tadano,Toshiharu Kagawa","Control design of the pneumatic cylinder with distributed model of pipelines","The 5th International Conference on Positioning Technology",,,,,"pp. 115-119",2012,Nov.
"村木雄飛,藤田壽憲,榊和敏,川嶋健嗣,香川利春","空気圧ベローズで駆動する静圧案内微動ステージのナノ位置決め","平成24年度秋季フルードパワーシステム講演会","平成24年度秋季フルードパワーシステム講演会 講演論文集",,,,"pp. 112-114",2012,Nov.
"加藤友規,増田大海,河村良行,舩木達也,川嶋健嗣,香川利春","層流型高速応答流量計を用いたソプラノリコーダー吹奏ロボットの呼気制御",,"日本フルードパワーシステム学会論文集",,"Vol. 43","No. 6","pp. 9-14",2012,Nov.
"大川陽一,村松久巳,尹鍾晧,香川利春","ガイド構造を有する平行円板間流れの騒音特性に関する研究",,"日本フルードパワーシステム学会論文集",,"Vol. 43","No. 6","pp. 135-142",2012,Oct.
"Xin Li,TOSHIHARU KAGAWA","An Investigation on the Flow Field of a Vortex Cup","Asiasim & ICSC 2012",,,,,,2012,Oct.
"Xin Li,TOSHIHARU KAGAWA","Development of a new noncontact gripper using swirl vanes",,"Robotics and Computer-Integrated Manufacturing","elsevier","Vol. 29",,"pp. 63-70",2012,Sept.
"大川陽一,尹鍾晧,中村善也,香川利春","水素における等温化放出法による流量測定",,"計測自動制御学会論文集 = Transactions of the Society of Instrument and Control Engineers",,"Vol. 48","No. 9","pp. 515-521",2012,Sept.
"unknown unknown,chong Ho Youn,村松久巳,TOSHIHARU KAGAWA","Flow rate measurement with isothermal discharge method in hydrogen",,,,"Vol. International Journal of Hydrogen Energy","No. 24","pp. 18882?18887",2012,Sept.
"村木雄飛,藤田壽憲,榊和敏,川嶋健嗣,香川利春","空気圧ベローズを用いた静圧案内微動ステージの超精密位置決め","日本機械学会2012年度年次大会",,,,,"  J113031",2012,Sept.
"Hiromi Masuda,Tomonori Kato,Kenji Kawashima,Toshiharu Kagawa","Development of a Recorder-playing Robot Using Unsteady Flow Rate Control Technique","SICE Annual Conference 2012",,,,,"pp. 1319-1324",2012,Aug.
"Kenji Kawashima,Kotaro Tadano,Daisuke Haraguchi,Toshiharu Kagawa","Pneumatically Driven Robot System  with Force Perception for Tele-surgery","TIT-BIT Joint Workshop on Mechanical Engineering",,,,,"pp. 1-6",2012,Aug.
"中尾光博,川嶋健嗣,香川利春","流体管路の過渡応答に関する逆問題の基礎検討","日本フルードパワーシステム学会春季講演会","日本フルードパワーシステム学会春季講演会",,,,"pp. 46-48",2012,May
"李君,川嶋健嗣,只野耕太郎,香川利春","接続管路の分布モデルを考慮した空気圧シリンダの位置決め制御","日本フルードパワーシステム学会春季講演会","日本フルードパワーシステム学会春季講演会",,,,"pp. 16-18",2012,May
"只野耕太郎,赤井正雄,川嶋健嗣,尹鍾晧,香川利春","空気圧ゴム人工筋を用いた二関節駆動を有する握力増幅グローブ",,"日本フルードパワーシステム学会論文集",,"Vol. 43","No. 3","pp. 48-54",2012,May
"Yoichi Okawa,chong Ho Youn,TOSHIHARU KAGAWA","A study of the characteristics of flow rate and extinction in a flame arrester with radial slit structure",,"Journal of Loss Prevention in the Process Industries",,"Vol. 25","No. 2","pp. 242?249",2012,Mar.
"加藤友規,大野学,東知明,只野耕太郎,川嶋健嗣,香川利春","ゴムベローズを用いた高減衰空気圧ゴム人工筋の提案と特性解析",,"日本フルードパワーシステム学会論文集",,"Vol. 42","No. 6","pp. 114-119",2011,Nov.
"山本敏之,藤田壽憲,川嶋健嗣,香川利春,榊和敏","空気圧ベローズで駆動する静圧案内微動ステージの超精密位置決め","第12回流体計測制御シンポジウム","計測自動制御学会産業応用部門講演論文集",,,,"pp. 26-29",2011,Nov.
"Jun Li,Kotaro Tadano,Kenji Kawashima,Toshinori Fujita,Toshiharu Kagawa","Trajectory control of pneumatic servo table with air bearing",,"Int. J. of Automation Technology",,"Vol. 5","No. 6","pp. 800-808",2011,Nov.
"Mizuki Komiya,Kenji Kawashima,Kotaro Tadano,Toshiharu Kagawa","Control Design for Antagonistic Drive with Pneumatic Actuators","the 8th JFPS International Symposium on Fluid Power","Proceedings of the 8th JFPS International Symposium on Fluid Power",,,,"pp. 638-643",2011,Oct.
"Kotaro Tadano,Hiroshi Araya,Kenji Kawashima,Chong Ho Youn,Toshiharu Kagawa","Development of Jump Assist System using Pneumatic Rubber Muscle","The 8th JFPS International Symposium on Fluid Power","Proceedings of the 8th JFPS International Symposium on Fluid Power",,,,"pp. 677-682",2011,Oct.
"Tomonori Kato,Yoshiyuki Kawamura,Tatsuya Funaki,Kenji Kawashima,Toshiharu Kagawa","Control of Blown Air for a Soprano-Recorder-Playing Robot Using Unsteady Flow Rate Measurements and Control Techniques","The 8th JFPS International Symposium on Fluid Power","Proceedings of the 8th JFPS International Symposium on Fluid Power",,,,"pp. 626-632",2011,Oct.
"Yu Okamoto,Mitsuhiro Nakao,Kotaro Tadano,Kenji Kawashima,Toshiharu Kagawa","A Distributed Observer Based on Numerical Simulation for a Pipeline Connecting to Pneumatic Cylinder","the 8th JFPS International Symposium on Fluid Power","Proceedings of the 8th JFPS International Symposium on Fluid Power",,,,"pp. 514-520",2011,Oct.
"Mitsuhiro Nakao,Kenji Kawashima,Toshiharu Kagawa","Measurement-integrated Simulation Using a Turbulent Model from Wall Pressure Measurements for Analyzing Oscillating Orifice Flow in a Circular Pipe",,"Computer and Fluids",,"Vol. 49","No. 1","pp. 188-196",2011,Oct.
"Mitsuhiro Nakao,Kenji Kawashima,Toshiharu Kagawa","MI Simulation of an Orifice Flow in a Circular Pipe with Different Beta Ratios","SICE Annual Conference 2011",,,,,"pp. 1479-1484",2011,Sept.
"Jun Li,Kenji Kawashima,Toshinori Fujita,Toshiharu Kagawa","Trajectory control of pneumatic servo table with air bearing","SICE Annual Conference 2011",,,,,"pp. 1473-1478",2011,Sept.
"Jun Li,Kenji Kawashima,Toshiharu Kagawa,Toshinori Fujita","Trajectory control of pneumatic servo table with air bearing","The 2011 International Conference on Fluid Power and Mechatronics","The 2011 International Conference on Fluid Power and Mechatronics",,,"  DVD-ROM FPM2011","  PDF0153",2011,Aug.
"Jun Li,Joonmyeong Choi,Kenji Kawashima,Toshinori Fujita,Toshiharu Kagawa:","Integrated control design of pneumatic servo table considering the dynamics of pipelines and servo valve",,"Int. J. of Automation Technology",,"Vol. 5","No. 4","pp. 485-492",2011,July
"尹鍾晧,向後晃,川嶋健嗣,香川利春","二種の混合ガスの混合比率測定システムの測定精度向上に関する研究",,"計測自動制御学会論文集",,"Vol. 47","No. 7","pp. 295-300",2011,July
"Toshinori Fujita,Kazutoshi Sakaki,Yusuke Takagi,Kenji Kawashima,Toshiharu Kagawa","Ultra Precise Positioning of a Stage Driven by Pneumatic Bellows",,"Int. J. of Automation Technology",,"Vol. 5","No. 4","pp. 580-511",2011,July
"金寅,黎しん,尹鍾晧,川嶋健嗣,香川利春","旋回流を用いた非接触搬送系に関する研究（第3報，ボルテックス・カップと搬送物の位置関係による影響）",,"日本フルードパワーシステム学会論文集",,"Vol. 42","No. 4","pp. 67-73",2011,July
"Mitsuhiro Nakao,Kenji Kawashima,Toshiharu Kagawa","Grid Dependency of the MI simulation for an Orifice Flow in a Circular Pipe","The 11th Asian Symposium on Visualization","The 11th Asian Symposium on Visualization",,,"  DVD-ROM ASV11-16-13","pp. pp. 1-8",2011,June
"Wei Zhong,Guoliang Tao,Li Xin,Kenji Kawashima,Toshiharu Kagawa","Determination of Flow Rate Characteristics of Porous Media Using Charge Method,",,"Flow Measurement and Instrumentation",,"Vol. 22","No. 3","pp. 201-207",2011,June
"Chong  Youn,Kenji Kawashima,Toshiharu Kagawa","Concentration measurement systems with stable solutions for binary gas mixtures using two flowmeters",,"Measurement Science and Technology",,"Vol. 22","  065401","pp. 1-6",2011,June
"Xin Li,Shouichiro Iio,Kenji Kawashima,Toshiharu Kagawa","A CFD study on non-contact handling device using air swirling flow",,"Journal of engneering mechanics",,"Vol. 137","No. 6","pp. 400-409",2011,June
"加藤友規,東和明,大野学,只野耕太郎,川嶋健嗣,香川利春","ゴムベローズを用いた高減衰空気圧ゴム人工筋のモデル化とシミュレーション","平成23年度春季フルードパワーシステム講演会","平成23年度春季フルードパワーシステム講演会講演論文集",,,,"pp. 13-15",2011,May
"山口貴大,只野耕太郎,川嶋健嗣,香川利春","空気圧ゴム人工筋を用いた二関節駆動ロボットアームの制御性能に関する研究","平成23年度日本フルードパワーシステム学会春季講演会","平成23年度日本フルードパワーシステム学会春季講演会講演論文集",,,,"pp. 64?66",2011,May
"尹鍾晧,稲葉怜,川嶋健嗣,香川利春","拡大管・縮小管を通る定常及び脈動流れにおける圧力損失",,"日本フルードパワーシステム学会論文集",,"Vol. 42","No. 2","pp. 13-19",2011,Mar.
"門田和雄,新谷宏,只野耕太郎,川嶋健嗣,香川利春","等温化した空気圧ゴム人工筋の体積からの収縮力推定",,"日本フルードパワーシステム学会論文集",,"Vol. 42","No. 1","pp. 1?6",2011,Jan.
"Xin Li,Mikio Horie,Toshiharu Kagawa","An Experimental Investigation on Vortex-type Bearing","2011 International Conference on Fluid Power and Mechatronics","Journal of  2011 International Conference on Fluid Power and Mechatronics",,,,"pp. 697-702",2011,
"Xin Li,Mikio Horie,Toshiharu Kagawa","Development of a new non-contact handling device using swirl vanes","The 4th International Conference on Manufacturing, Machine Design and Tribology","Proceedings of  the 4th International Conference on Manufacturing, Machine Design and Tribology",,,,"pp. 257-260",2011,
"新谷宏,只野耕太郎,尹鍾晧,川嶋健嗣,香川利春","瞬発力を有するパワーアシスト装置の開発",,"平成22年秋季フルードパワーシステム講演会講演論文集",,,,"pp. 142-144",2010,Dec.
"山本 敏之,藤田壽憲,川嶋健嗣,香川利春,榊 和敏","低流体ノイズ弁による空気圧微動ステージの超精密位置決め制御",,"平成22年秋季フルードパワーシステム講演会講演論文集",,,,"pp. 25?27",2010,Dec.
"湊健二,黎シ,川嶋健嗣,香川利春","旋回流を用いたエアベアリングに関する研究",,"平成22年度秋季フルードパワーシステム講演会講演論文集",,,,"pp. 139-141",2010,Dec.
"横田雄二,北川能,香川利春,留滄海","アキュムレータの充填・放出特性","計測自動制御学会2010産業応用部門大会第11回流体計測制御シンポジウム","計測自動制御学会2010産業応用部門大会第11回流体計測制御シンポジウム講演論文集",,,,,2010,Nov.
"Jun Li,Joonmyeong Choi,Kenji Kawashima,Toshinori Fujita,Toshiharu Kagawa","Integrated control design of pneumatic servo table considering the dynamics of pipelines",,"計測自動制御学会産業応用部門大会講演論文集",,,,"pp. 41-46",2010,Nov.
"中尾光博,岡本悠,川嶋健嗣,香川利春","分布定数オブザーバを用いた空気圧管路容量系の圧力制御",,"計測自動制御学会産業応用部門大会講演論文集",,,,"pp. 35-40",2010,Nov.
"Mitsuhiro Nakao,Kenji Kawashima,Toshiharu Kagawa","Analysis of pneumatic pipeline using CCUP(CIP-combined and unified procedure)method",,"SICE Annual Conference 2010",,,,"pp. 1670-1675",2010,Sept.
"Kotaro Tadano,Takeshi Arai,Kenji Kawashima,Toshinori Fujita,Toshiharu Kagawa","Precise  Position Control of Coarse/Fine Dual Stage using Pneumatic  Actuators",,"World Automation Congress 2010",,,,,2010,Sept.
"Mitsuhiro Nakao,Kenji Kawashima,Toshiharu Kagawa","Computation of an Unsteady Orifice Flow in a Circular Pipe From Wall Pressure Measurements based on measurement-integrated simulation using a turbulent model",,"FEDSM-ICNMM2010",,,,"pp. 30619-1-7",2010,Aug.
"Wei Zhong,Guoliang  Tao,Xin Li,Kenji Kawashima,Toshiharu Kagawa","Analysis of levitation using porous media",,"SICE Annual Conference 2010",,,,"pp. 1658-1663",2010,Aug.
"Kenji Kawashima,Takeshi Arai,Kotaro Tadano,Toshinori Fujita,Toshiharu Kagawa","Development of Coarse/Fine Dual Stages using Pneumatically Driven Bellows Actuator and Cylinder wiht Air Bearings",,"Precision Engineering",,"Vol. 34",,"pp. 526-533",2010,July
"加藤友規,品川大輔,只野耕太郎,川嶋健嗣,香川利春","加速度・速度・流量フィードバックによる鉄道台車の鉛直空気ばねの制御",,"SICE産業論文集",,"Vol. 9","No. 13","pp. 91-97",2010,July
"黎シ,川嶋健嗣,香川利春","A Numerical Investigation on Flow Field of Vortex Holder",,"第29回日本シミュレーション学会大会,",,,,"pp. 111-114",2010,June
"Mitsuhiro Nakao,Kenji Kawashima,Toshihar Kagawa","Visualization of a Steady Orifice Flow in a Circular Pipe from Wall Pressure Measurement Based on Measurement-integrated Simulation Using Turbulent Model",,"The 14th International Symposium on Flow Visualization",,,"  9B2-082","pp. 1-8",2010,June
"Hongbing LI,Sumire Nakano,Kotaro Tadano,Kenji Kawashima,Toshiharu Kagawa","Research on accuracy of force estimation with surgical manipulator using pneumatic artificial muscle",,"日本フルードパワーシステム学会春季講演会講演論文集",,,,"pp. 100-102",2010,May
"加藤友規,舩木達也,川嶋健嗣,香川利春","超精密高速応答圧力レギュレータの応答性能の評価に関する研究",,"日本フルードパワーシステム学会春季講演会講演論文集",,,,"pp. 94?96",2010,May
"川嶋健嗣,加藤友規,金恩敬,新井豪,只野耕太郎,香川利春","圧力微分計を用いた空気ばね式除振台の外乱補償制御",,"日本機械学会論文集C編",,"Vol. 76","No. 764","pp. 816-868",2010,Jan.
"Tomonori Kato,Kenji Kawashima,Tatsuya Funaki,Kotaro Tadano,Toshiharu Kagawa","A New, High Precision, Quick Response Pressure Regulator for Active Control of Pneumatic Vibration Isolation Tables",,"Precision and Engineering",,"Vol. 34",,"pp. 43-48",2010,Jan.
"中尾光博,川嶋健嗣,香川利春","乱流モデルを用いた計測融合シミュレーションによるオリフィス流れの可視化",,"計測自動制御学会論文集",,"Vol. 45","No. 12","pp. 671-677",2009,Dec.
"Mitsuhiro Nakao,Kenji Kawashima,Toshiharu Kagawa","Application of MI Simulation Using a Turbulent Model for Unsteady Orifice Flow",,"Trans. ASME Journal of Fluid Engineering",,"Vol. 131","No. 11","pp. 111401-1-6",2009,Nov.
"中野すみれ,只野耕太郎,川嶋健嗣,香川利春","空気圧ゴム人工筋を用いた多自由度鉗子の開発","平成21年秋季フルードパワーシステム講演会","平成21年秋季フルードパワーシステム講演会講演論文集",,,,,2009,Nov.
"秋久潤,加藤友規,舩木達也,川嶋健嗣,香川利春","圧力脈動場における気体用流量計の特性試験装置に関する研究",,"第9回流体計測制御シンポジウム",,,,"pp. 51-54",2009,Nov.
"中尾光博,川嶋健嗣,香川利春","壁面圧力のみを用いた乱流オリフィス流れの計測融合シミュレーション",,"第9回流体計測制御シンポジウム",,,,"pp. 15-20",2009,Nov.
"黎シン,川嶋健嗣,香川利春","空気の旋回流を用いた非接触搬送装置に関する数値解析",,"日本フルードパワーシステム学会秋季講演会講演論文集",,,,"pp. 76-78",2009,Nov.
"Xin Li,Kenji Kawashima,Toshiharu Kagawa,Chongo Youn","A Numerical Study on Vortex Cup",,"Asia Simulation Conference 2009",,,,,2009,Oct.
"OOLAI,尹鍾晧,香川利春","差圧式による温度補償漏洩検出測定法",,"第26回センシングフォーラム計測部門大会",,,,"pp. 60-64",2009,Oct.
"Wei Zhong,Guoliang  Tao,Xin Li,Kenji Kawashima,Toshiharu Kagawa","Analysis on Flow Rate Characteristics of Porous Materials",,"Asia Simulation Conference 2009",,,,,2009,Oct.
"尹鍾晧,OOLAI,黎シ,香川利春","円柱の非定常温度変化計測に関する研究",,"第26回センシングフォーラム計測部門大会",,,,"pp. 155-158",2009,Oct.
"Zhonghua  Guo,Xiaoning  Li,Xin Li,Kenji Kawashima,Toshiharu Kagawa","Simulation on Pneumatic Vacuum Circuit with Ejector",,"Asian Simulation Conference 2009",,,,,2009,Oct.
"Zhonghua Guo,川嶋健嗣,香川利春","真空エジェクタ回路の臨界背圧を考慮した動作モデルに関する研究",,"日本フルードパワーシステム学会秋季講演会講演論文集",,,,"pp. 127-129",2009,Oct.
"Wei Zhong,川嶋健嗣,香川利春","多孔質体による浮上の考察",,"日本フルードパワーシステム学会秋季講演会講演論文集",,,,"pp. 73-75",2009,Oct.
"梅鉢 茉紗子,黎シ,香川利春","ボルテックスカップに関する研究（噴流の流入条件の影響について）",,"日本機械学会2009年度年次大会講演論文集(2)",,,"No. 09-1","pp. 195- 196",2009,Oct.
"chong Ho Youn,LAI LAI OO,xin li,TOSHIHARU KAGAWA","An experimental study on flow around the circular cylinder by unsteady state temperature change",,"Asia Simulation Conference 2009",,,,,2009,Oct.
"LAI LAI OO,chong Ho Youn,TOSHIHARU KAGAWA","Temperature Compensation in Differential Pressure Method for Air LeakageDetection",,"Asia Simulation Conference 2009",,,,,2009,Oct.
"Kazuo Kadota,Masao Akai,Kenji Kawashima,Toshiharu Kagawa","Development of Power-Assist Robot Arm using Pneumatic RubberMuscles with a Balloon Sensor",,"IEEE International Symposium on Robot and Human Interactive Communication",,,,"pp. 546-551",2009,Sept.
"浅野誠一郎,香川利春,池田駿介","異種ガスを用いた抵抗要素の流量特性",,"計測自動制御学会産業論文集",,"Vol. 8","No. 9","pp. 76/81",2009,Sept.
"新井豪,川嶋健嗣,只野耕太郎,藤田壽憲,香川利春","空気圧アクチュエータを用いた粗微動ステージ",,"第27回日本ロボット学会学術講演会",,,,"  3B2-03",2009,Sept.
"金恩敬,新井豪,只野耕太郎,加藤友規,川嶋健嗣,香川利春","圧力微分計を用いた空気ばね式除振台の外乱補償制御",,"第11回「運動と振動の制御」シンポジウム’09",,,"No. 9-30","pp. 480-484",2009,Sept.
"加藤友規,品川 大輔,只野耕太郎,川嶋健嗣,香川利春","加速度・速度・流量フィードバックによる鉄道台車の鉛直空気ばねの制御",,"第11回「運動と振動の制御」シンポジウム’09",,,"No. 9-30","pp. 470-473",2009,Sept.
"Tomonori Kato,Jun Akihisa,TOSHIHARU KAGAWA","Measurement of The Pulsation in Gas Pipe Line and Feasibilit y Evaluation of the Gas Pulsation Duplicating System",,"10th International Conference on Fluid Control",,,,,2009,Aug.
"Kunio Okada,chong Ho Youn,TOSHIHARU KAGAWA","Modeling of Gas Governor System with Venturi",,"ICROS-SICE International Joint Conference 2009",,,,"pp. 3347-3352",2009,Aug.
"TOSHIHARU KAGAWA,Riki Nishimura,chong Ho Youn","Development of High Speed Response Laminar Flow Meter for Air Conditioning",,"10th International Conference on Fluid Control, Measurements, and Visualization",,,,,2009,Aug.
"Yoichi Ohkawa,chong Ho Youn,Kenji Kawashima,Toshiharu Kagawa","Study on Flow Characteristics of Radial Slit Element",,"10th International Conference on Fluid Control, Measurements, and Visualization",,,,,2009,Aug.
"Tatsuya Funaki,Tomonori Kato,Kenji Kawashima,Toshiharu Kagawa","Study on a performence evaluation of oscillatory gas flow generator with highly precise inlet flow control system",,"ICROS-SICE International Joint Conference 2009",,,,"pp. 3819-3824",2009,Aug.
"Mitsuhiro Nakao,Kenji Kawashima,Toshiharu Kagawa","Effective Feedback Algorithm for Application of MI-simulation to Turbulent Orifice Flow",,"ICROS-SICE International Joint Conference 2009",,,,"pp. 3809-3814",2009,Aug.
"chong Ho Youn,Riki Nishimura,TOSHIHARU KAGAWA","Development of high speed response laminar flow meter for air conditioning",,"Proceedings of the 3rd BIT-TIT Joint Workshop on Mechanical Engineering",,,,"pp. 99-107",2009,Aug.
"Zhonghua  Guo,黎シ,香川利春","抵抗を有するエジェクター制御回路の流量特性についての考察",,"春季フルードパワーシステム講演会’09",,,,"pp. 29-31",2009,June
"加藤友規,川嶋健嗣,香川利春","ベローズを併用した空気圧ゴム人工筋の非線形モデル",,"春季フルードパワーシステム講演会",,,,"pp. 23-25",2009,June
"新井豪,川嶋健嗣,藤田壽憲,香川利春","粗微動空気圧アクチュエータによる超精密位置決め",,"春季フルードパワーシステム講演会",,,,"pp. 20-22",2009,June
"中尾光博,川嶋健嗣,香川利春","乱流モデルを用いたオリフィス定常流れの計測融合シミュレーション",,"春季フルードパワーシステム講演会",,,,"pp. 11-13",2009,June
"Wei Zhong,黎シ,香川利春","多孔質からだの流量特性に関する研究",,"春季フルードパワーシステム講演会’09",,,,"pp. 26-28",2009,June
"黎シ,川嶋健嗣,香川利春","旋回流を用いた非接触搬送系に関する研究（第2報，スクイズ効果を考慮した動的モデリング）",,"日本フルードパワーシステム学会論文集",,"Vol. 40","No. 3","pp. 43-49",2009,May
"香川利春,尹鍾晧","超静音型減圧弁",,"日本フルードパワーシステム学会誌",,"Vol. 40","No. 5","pp. 296-299",2009,May
"黎シ,香川利春","旋回流を用いた非接触搬送系に関する研究（ボルテックスカップ内の流動現象について）",,"日本機械学会東海支部第58期総会・講演会",,,"No. 093-1","pp. 297-298",2009,Apr.
"Xin Li,Kenji Kawashima,Toshiharu Kagawa","Research on vortex cup with annular flat skirt",,"International Conference on Fluid Power Transmission and Control,",,,,"pp. 587-592",2009,Apr.
"香川利春","圧縮性流体の計測・制御技術",,,,"Vol. 48","No. 3","pp. 217-218",2009,Mar.
"王涛,香川利春","圧力応答を用いた空気圧電磁弁の流量特性の計測",,"計測と制御",,"Vol. 48","No. 3","pp. 231-236",2009,Mar.
"浅野誠一郎,香川利春","水素供給ステーションにおけるフレームアレスタの現状と動向",,"計測と制御",,"Vol. 48","No. 3","pp. 249-255",2009,Mar.
"張 小剣,吉田真,香川利春","分岐・合流を有する圧縮性流体回路の特性",,"日本フルードパワーシステム学会論文集",,"Vol. 40","No. 3","pp. 50-55",2009,Mar.
"川嶋健嗣,香川利春","圧力微分計を用いた高速応答圧力レギュレータ",,"計測と制御",,,,"pp. 219-224",2009,Mar.
"門田和雄,齋藤靖之,川嶋健嗣,香川利春","等温化した空気圧ゴム人工筋の体積からの収縮率推定",,"日本フルードパワーシステム学会論文集",,"Vol. 40","No. 2","pp. 17-21",2009,Feb.
"Kotaro Tadano,Wataru Sumino,Kenji Kawashima,Toshiharu Kagawa","Pneumatically Driven Forceps Manipulator for Laparoscopic Surgery","SICE Annual Conference 2008",,,,,"pp. 2993-2996",2008,Dec.
"香川利春","半導体産業活躍する空気圧技術の最新動向",,"FujiSankei Business i.",,,,,2008,Dec.
"Tomonori Kato,Kotaro Tadano,Kenji Kawashima,Toshiharu Kagawa","Development of a Precise and Quick Response Pneumatic Pressure Regulator and its Application to Pneumatic Vibration Isolator",,"Proc. of ASPE 2008 Annual Meeting",,,,,2008,Nov.
"赤井正雄,門田和雄,川嶋健嗣,香川利春","空気圧ゴム人工筋を用いた握力増幅グローブの研究",,"SICE2008年度産業応用部門大会",,,,"pp. 29-34",2008,Oct.
"香川利春,黎シ","非接触吸着（ベルヌーイ法とボルテックス法）",,"油空圧技術",,"Vol. 47","No. 10",,2008,Oct.
"黎シ,川嶋健嗣,香川利春","ボルテックス法の動特性に関する研究",,"SICE2008年度産業応用部門大会",,,,"pp. 23-28",2008,Oct.
"浅野誠一郎,香川利春,池田駿介","圧縮性流体における流体要素の流量特性に関する研究",,"平成20年度全国大会",,,,,2008,Oct.
"Kotaro Tadano,Kenji Kawashima,Toshiharu Kagawa","Development of robot manipulator for laparoscopic surgery with force display using pneumatic servo system","7th JFPS international symposium on Fluid Power","Proc. of 7th JFPS international symposium on Fluid Power",,,,"pp. 821-824",2008,Oct.
"尹鍾晧,浅野誠一郎,大川陽一,川嶋健嗣,香川利春","ラジアルスリット弁の流体特性に関する考察",,"SICE2008年度産業応用部門大会",,,,"  11-14",2008,Oct.
"Masahiro Arakawa,Toshiharu Kagawa,Masaaki Takeuchi","A Study on Effects of Mixing Different Gases in Pipes",,"Asia Simulation Conference 2008 (ICSC'2008)",,,,,2008,Oct.
"Riki Nishimura,Kenji Kawashima,Toshiharu Kagawa","Analysis of Laminar Flow Meter with Flute-Type Cross Section Laminar Elements",,"Asia Simulation Conference 2008 (ICSC'2008)",,,,,2008,Oct.
"Masahiro Urata,Xin Li,Kenji Kawashima,Toshihar Kagawa","Model for Compressible Fluid Passing Through a Pressure Control Valve,",,"Asia Simulation Conference 2008 (ICSC'2008)",,,,,2008,Oct.
"Mitsuhiro Nakao,chong Ho Youn,Kenji Kawashima,Toshiharu Kagawa","Research on Visualization of Low Noise Pressure Reducing Vavle",,"ISFV13(International Symposium on Flow Visualization)",,,,,2008,Oct.
"香川利春","圧縮性流体計測制御",,"第5回中国流体伝動・制御学術会議（2008中国航空学会油圧空気圧学会会議）",,,,,2008,Oct.
"Xin Li,Kenji Kawashima,TOSHIHARU KAGAWA","Analysis of vortex levitation",,"Experimental Thermal and Fluid Science","Elsevier Inc.","Vol. 32","No. 8","pp. 1448-1454",2008,Sept.
"Laksana Guntur Harus,Chongho Youn,Nozomu Nagai,Toshiharu Kagawa","A Study on Leak Detection of a Household Gas Supply System using Pressure Decay Method",,"Proc. of SICE Annual Conference",,,,"pp. 2987-2992",2008,Sept.
"Riki Nishimura,Mitsuo Igari,Yasuhito Omagari,Kotaro Tadano,Kenji Kawashima,Toshiharu Kagawa,Chongho Youn","Development of Transient Type Air Flow Meter for Critical Environment",,"Proc. of SICE Annual Conference",,,,"pp. 2983-2986",2008,Sept.
"Xin Li,Kenji Kawashima,Toshiharu Kagawa","Dynamic Characteristics of Vortex Levitation",,"Proc. of SICE Annual Conference",,,,"pp. 1175-1180",2008,Sept.
"Yoichi Okawa,Seiichiro Asano,chong Ho Youn,Syunsuke Ikeda,Toshiharu Kagawa","Experimental Research on a Newly Developed Detonation Flame Arrester",,"Proc. of SICE Annual Conference",,,,"pp. 1088-1091",2008,Sept.
"chong Ho Youn,Kenji Kawashima,Toshiharu Kagawa","Flow Characteristics of Pressure Reducing Valve",,"Journal of Visualization",,"Vol. 11","No. 4","pp. 357-364",2008,Sept.
"Tatsuya Funaki,Tomonori Kato,Kenji Kawashima,Toshiharu Kagawa","Development of unsteady gas flow generator with highly precise inlet flow rate control system",,"7th JFPS international symposium on Fluid Power",,,,"pp. 709-714",2008,Aug.
"中尾光博,西村力,川嶋健嗣,香川利春","非定常流量発生装置と供試流量計間の位相遅れに関する研究",,"日本機械学会年次大会",,"Vol. 2",,"pp. 131-132",2008,Aug.
"舩木達也,川嶋健嗣,香川利春","呼吸を模擬可能な非定常流量発生装置の開発",,"日本機械学会年次大会",,"Vol. 2",,"pp. 143-144",2008,Aug.
"香川利春","工作機械のための空気圧入門",,"機械の研究",,"Vol. 60","No. 10",,2008,Aug.
"浅野誠一郎,川嶋健嗣,香川利春","異種ガスのオリフィスにおける流量特性",,"日本機械学会年次大会",,"Vol. 2",,"pp. 127-128",2008,Aug.
"Tatsuya Funaki,Tomonori Kato,Kenji Kawashima,Toshiharu Kagawa","Study on an influence of impedance element for dynamiccharacteristics measurement with oscillatory gas flowgenerator",,"Proc. of SICE Annual Conference",,,,,2008,Aug.
"Mitsuhiro Nakao,Kenji Kawashima,Toshiharu Kagawa","Application of MI-simulation Using Turbulent Model for Unsteady Orifice Flow",,"Proc. of SICE Annual Conference",,,,"pp. 2997-3002",2008,Aug.
"Xin Li,Kenji Kawashima,Toshiharu Kagawa","Analysis of Vortex Levitaion",,"Experimental Thermal and Fluid Science",,"Vol. 32","No. 8","pp. 1448-1454",2008,Aug.
"向後晃,尹鍾晧,川嶋健嗣,香川利春","二種の混合気体の測定システムの開発",,"日本機械学会年次大会",,"Vol. 2",,"pp. 129-130",2008,Aug.
"Tetsuya Ueda,Toshiharu Kagawa","All in one type fluid flow servo system using solenoid valve and isothermal pressure vessel",,"7th JFPS international symposium on Fluid Power",,,,"pp. 825-826",2008,Aug.
"chong Ho Youn,Yoichi Okawa,Kenji Kawashima,Toshiharu Kagawa","Study on low noise pressure reducing valve with radial slit structure",,"7th JFPS international symposium on Fluid Power",,,,"pp. pp.799-802",2008,Aug.
"Masahiro Hirano,Kazutoshi Sakaki,Toshinori Fujita,Kenji Kawashima,Toshiharu Kagawa","Contorl system design of a pneumatic servo system considering the dynamic characteristics of the servo valve",,"7th JFPS international symposium on Fluid Power",,,,"pp. 457-460",2008,Aug.
"兵藤俊夫,香川利春","分岐・合流を有する圧縮性流体回路の動特性",,"日本機械学会年次大会",,"Vol. 2",,"  135-136",2008,Aug.
"梅鉢茉紗子,香川利春","旋回流を用いた非接触搬送系に関する研究",,"日本機械学会年次大会",,"Vol. 2",,"pp. 137-138",2008,Aug.
"Toshiharu Kagawa","New pneumatic techniques and applications",,"7th JFPS international symposium on Fluid Power",,,,"pp. 3-8",2008,Aug.
"浅野誠一郎,大川陽一,川嶋健嗣,香川利春,尹鍾晧","消炎機構を有するスリッ型フレームアレスターの消炎特性に関する研究",,"第27回日本シミュレーション学会大会",,,,"pp. 399-402",2008,June
"荒川正裕,香川利春,竹内正顯","管路内での異種ガス混合に関する研究",,"第27回日本シミュレーション学会大会",,,,"pp. 387-390",2008,June
"浅野誠一郎,大川陽一,川嶋健嗣,香川利春,尹鍾晧","マイクロラジアルスリットの流体抵抗に関する研究",,"春季フルードパワーシステム講演会講演論文集",,,,"pp. 95-97",2008,May
"川嶋健嗣,齋藤靖之,只野耕太郎,門田和雄,香川利春","装着部のセンサレス化を実現した空気圧ゴム人工筋を用いたパワーアシスト装置",,"春季フルードパワーシステム講演会講演論文集",,,,"pp. 83-85",2008,May
"加藤友規,川嶋健嗣,香川利春","ゴムベローズと微分先行制御を用いた空気圧ゴム人工筋ロボットアームの制御",,"春季フルードパワーシステム講演会講演論文集",,,,"pp. 80-82",2008,May
"香川利春,黎シ","旋回流を用いた非接触搬送装置",,"フルードパワーシステム",,"Vol. 39","No. 2","pp. 70-73",2008,Jan.
"Toshinori Fujita,Kenji Kawashima,Toshiharu Kagawa","Effect of Servo Valve Dynamic on Precise Position Control of a Pneumatic Servo Table",,"Internatinal Journal of Automation Technology",,"Vol. 2","No. 1","pp. 43-48",2008,Jan.
"浅野誠一郎,竹内智朗,川嶋健嗣,香川利春,池田駿介","異種ガスのオリフィスにおける流量特性","日本機械学会 2008年度年次大会","日本機械学会 2008年度年次大会講演論文集",,"Vol. 2",,"pp. 127-128",2008,
"Seiichiro Asano,Chongho Youn,Syunsuke Ikeda,Toshiharu Kagawa","Experimental research on a newly developed detonation flame arrester",,"SICE Annual Conference 2008",,,,"pp. 1088-1091",2008,
"荒川正裕,香川利春","管路内で異種ガス混合に関する考察",,"日本シミュレーション学会",,"Vol. 26","No. 4","pp. 10-16",2007,Dec.
"ＧＵＮＴＵＲＨＡＲＵＳ ＬＡＫＳＡＮＡ,竹内智朗,香川利春,浅野誠一郎","高効率ガス供給システムに関する研究",,"日本シミュレーション学会",,"Vol. 26","No. 4","pp. 17-23",2007,Dec.
"chongho youn,CHANTHALANG HEUANGKHAMSENE,kenji kawashima,TOSHIHARU KAGAWA","Analysis of Variable Slit Structure on Pneumatic System",,"Asia Simulation Conference (AsiaSim2007)",,,,"pp. 499-507",2007,Oct.
"尹鍾晧,ﾌｱﾝｶﾑｾﾝﾁﾔﾝﾀﾗﾝ,川嶋健嗣,香川利春","可変ラジアルスリットを用いた超静音型減圧機構の開発",,"SICE2007年度産業応用部門大会",,,,"pp. 11-14",2007,Oct.
"浅野誠一郎,竹内 智朗,若狭 匡輔,尹鍾晧,香川利春,池田駿介","異種ガスにおけるノズル・スリットの流量特性",,"SICE2007年度産業応用部門大会",,,,"pp. 7-10",2007,Oct.
"加藤友規,川嶋健嗣,香川利春,藤田壽憲","空気圧ゴム人工筋とゴムベローズを併用したロボットアームシステムの開発",,,,,,"pp. 31-33",2007,Oct.
"藤田壽憲,川嶋健嗣,香川利春","空気圧微動ステージのナノ位置決め制御",,"秋季フルードパワーシステム講演会講演論文集",,,,"pp. 49-51",2007,Oct.
"藤田壽憲,川嶋健嗣,香川利春","空気圧微動ステージのナノ位置決め制御",,"秋季フルードパワーシステム講演会講演論文集",,,,"pp. 49-51",2007,Oct.
"藤田壽憲,川嶋健嗣,香川利春","サーボ弁の動特性を考慮した空気圧サーボシステムの制御",,,,,,"pp. 67-69",2007,Oct.
"稲葉怜,浅野誠一郎,川嶋健嗣,香川利春","空気圧シリンダによるボール型制御弁の動作特性シミュレーション",,,,,,,2007,Oct.
"和泉善彦,新井豪,川嶋健嗣,香川利春,藤田壽憲","空気圧サーボテーブルシステムにおける配管の影響の考察",,"秋季フルードパワーシステム講演会講演論文集",,,,,2007,Oct.
"Koichi Igarashi,Kenji Kawashima,Toshiharu Kagawa","Development of simultaneous measurement system for instantaneous",,"Sensors & Actuators A.",,"Vol. 140","No. Issue 1","pp. 1-7",2007,Oct.
"TOSHIHARU KAGAWA","Analysis of pneumatic system with consideration of the temperature variation","International Conference on Mechanical Engineering and Mechanics",,,,,,2007,Sept.
"TOSHINORI FUJITA,kenji kawashima,TOSHIHARU KAGAWA","Ultra Precise Positioning Control of a Stage Driven by Pneumatic Bellows",,"Flucome 2007",,,,,2007,Sept.
"Tatsuya Funaki,kenji kawashima,山本円朗,Tomonori Kato,TOSHIHARU KAGAWA","Performance Evaluation of Oscillatory Gas Flow Generator Usingan Isothermal Chamber",,"Flucome 2007",,,,,2007,Sept.
"Harus Laksana Guntur,SEIICHIRO ASANO,TOSHIHARU KAGAWA","Charge-Discharge Characteristics of High Aspect Ratio Gas Accumulator for High Efficiency City Gas Transmission Systems",,"Flucome 2007",,,,,2007,Sept.
"門田和雄,齋藤靖之,川嶋健嗣,香川利春","流量からの変位推定を用いた空気圧ゴム人工筋パワーアシストアーム",,"SICE2007年度産業応用部門大会",,,,,2007,Sept.
"亀井繁輝,浅野誠一郎,川嶋健嗣,香川利春","ゴム弁体を用いた軸流型のガスガバナシステムの感度解",,"SICE2007年度産業応用部門大会",,,,"pp. 15-17",2007,Sept.
"中尾光博,川嶋健嗣,香川利春","非定常オリフィス流れ場を対象とした乱流モデルを組み込んだ計測融合シミュレーション",,"SICE2007年度産業応用部門大会",,,,"pp. 1-5",2007,Sept.
"chongho youn,SEIICHIRO ASANO,kenji kawashima,TOSHIHARU KAGAWA","Development of Super Silent Variable Breather Valve",,"FLUCOME 2007",,,,,2007,Sept.
"Tomonori Kato,kenji kawashima,Tatsuya Funaki,TOSHIHARU KAGAWA","Active Control of a Vibration Isolation Table Supported by Multiple Air Springs Using Quick Flow Sensors",,"FLUCOME 2007",,,,,2007,Sept.
"Tomonori Kato,kenji kawashima,Tatsuya Funaki,TOSHIHARU KAGAWA","Active Control of a Vibration Isolation Table Supported by Multiple Air Springs Using Quick Flow Sensors",,"FLUCOME 2007",,,,,2007,Sept.
"KOTARO TADANO,kenji kawashima,TOSHIHARU KAGAWA","Evaluation of a Master Slave System with Force Sensing",,"Proc. of SICE Annual Conference",,,,"pp. 2871-2874",2007,Aug.
"Li Xin,kenji kawashima,TOSHIHARU KAGAWA","Modeling of Non-Contact handling Device by Using Air Swirling Flow",,"6th EUROSIM CONGRESS",,,,,2007,Aug.
"香川利春,蔡茂林","空気圧システムのエネルギー消費の評価技術",,"油空圧技術",,"Vol. 46","No. 8","pp. 12-17",2007,Aug.
"tao wang,kenji kawashima,TOSHIHARU KAGAWA","Determination of Characteristics for Electrically Modulated Pneumatic Control Valves using Isothermal Chambers",,"International Journal of Fluid Power",,"vol. 8","no. 3","pp. 5-11",2007,Aug.
"香川利春","機械工学便覧 流体機械",,,"日本機械学会",,,,2007,Aug.
"ＧＵＮＴＵＲＨＡＲＵＳ ＬＡＫＳＡＮＡ,蔡茂林,川嶋健嗣,香川利春","差圧式漏れ計測装置の再現性に対する温度回復時間の影響",,"日本フル―ドパワ―システム学会論文集",,"Vol. 38","No. 4","pp. 54-59",2007,July
"浅野誠一郎,ＧＵＮＴＵＲＨＡＲＵＳ ＬＡＫＳＡＮＡ,香川利春,池田駿介","等温化圧力容器の圧力応答を用いた圧縮性流体の物性値の推定",,"日本シュミレーション学会大会発表論文集",,,,"pp. 71-74",2007,June
"加藤友規,川嶋健嗣,香川利春","流量フィードバック制御による空気ばね式除振台の省エネルギー化",,"日本機械学会 第10回「運動と振動の制御」シンポジウム講演論文集",,,,"pp. 304-309",2007,June
"中尾光博,川嶋健嗣,香川利春","計測融合シミュレーションを用いた乱流非定常オリフィス流れの解析",,"日本シュミレーション学会大会発表論文集",,,,"pp. 75-78",2007,June
"ＧＵＮＴＵＲＨＡＲＵＳ ＬＡＫＳＡＮＡ,浅野誠一郎,香川利春","高効率ガス供給システムに関する研究（縦型容器の充填・放出）",,"日本シュミレーション学会大会発表論文集",,,,"pp. 41-44",2007,June
"香川利春,ﾘｼﾝ,川嶋健嗣,藤野謙司,山本円朗","車両用トイレにおける空気圧システムのエアパワー",,"春季フルードパワーシステム講演会講演論文集",,,,"pp. 115-117",2007,May
"川嶋健嗣,王聡,佐々木高宙,香川利春","流量からの変位推定による空気圧ゴム人工筋アーム部のセンサレス化の実現",,"春季フルードパワーシステム講演会講演論文集",,,,"pp. 103-105",2007,May
"ﾘｼﾝ,川嶋健嗣,香川利春","旋回流を用いた非接触搬送装置の非定常把持特性",,"春季フルードパワーシステム講演会講演論文集",,,,"pp. 112-114",2007,May
"藤野 謙司,谷口 宏次,尹鍾晧,山本円朗,香川利春","新幹線車両における空気圧システムの消費エネルギの解明",,"日本シュミレーション学会大会発表論文集",,,,"pp. 65-68",2007,May
"浅野誠一郎,ﾌｱﾝｶﾑｾﾝﾁﾔﾝﾀﾗﾝ,尹鍾晧,川嶋健嗣,香川利春,池田駿介","可変マイクロラジアル機構を用いた超静音型減圧弁",,"春季フルードパワーシステム講演会講演論文集",,,,"pp. 118-120",2007,May
"Tatsuya Funaki,Kenji Kawashima,Shunpei Yamazaki,Toshiharu Kagawa","Generator of variable gas flows using an isothermal chamber",,"Measurement Science and Technology","IOP Publishing Ltd","Vol. 18","No. 2","pp. 835-842",2007,Feb.
"黎シン,徳永英幸,蔡茂林,舩木達也,川嶋健嗣,香川利春","旋回流を用いた非接触搬送系に関する研究（第１報　ボルテックス・チャックの基礎特性）",,"日本フルードパワーシステム学会論文集","（社）日本フルードパワーシステム学会","Vol. 38","No. 1","pp. 1-6",2007,Jan.
"安田純,只野耕太郎,川嶋健嗣,香川利春","空気圧を用いた多自由度鉗子の研究開発","平成18年度秋季フルードパワーシステム講演会","秋季フルードパワーシステム講演会講演論文集",,,,"pp. 118-120",2006,Nov.
"Tao Wang,kenji kawashima,TOSHIHARU KAGAWA","Modelling of a 4-Port Nozzle-Flapper Type Pneumatic Servo Valve","Asian Simulation Conference 2006",,,,,,2006,Nov.
"舩木達也,川嶋健嗣,香川利春,山本円朗","圧縮性流体の往復流連続発生装置の開発","SICE2006年度産業応用部門大会","SICE2006年度産業応用部門大会講演論文集","社団法人　計測自動制御学会",,,"pp. 33-38",2006,Nov.
"Tatsuya Funaki,Kenji Kawashima,Shintaro Inoue,Toshiharu Kagawa","Application of Measurement Integrated Simulation to Unsteady Flow Monitoring","SICE-ICCAS2006","SICE-ICCAS2006",,,,"pp. 5218-5221",2006,Oct.
"Kenji KAWASHIMA,Kotaro TADANO,Toshiharu KAGAWA","Integration of Experiment and Simulation for Fluid System Control including Simulator for Laparoscopic Surgery","SICE-ICASE International Joint Conference 2006","SICE-ICASE International Joint Conference 2006",,,,"pp. 4210-4213",2006,Oct.
"Tatsuya Funaki,Shunpei Yamazaki,Kenji Kawashima,Toshiharu Kagawa","Oscillatory gas flow generator using isothermal chamber","SICE-ICCAS 2006","SICE-ICCAS 2006",,,,"pp. 5212-5217",2006,Oct.
"香川利春","空気圧シリンダを用いたマスタスレーブシステムの制御に関する考察","春季フルードパワーシステム講演会",,,,,"pp. 70-72",2006,Aug.
"井上慎太郎,川嶋健嗣,舩木達也,香川利春","計測融合シミュレーションを用いた非定常管内流れ場のモニタリング",,"計測自動制御学会論文集","社団法人　計測自動制御学会","Vol. 42","No. 7","pp. 837-843",2006,July
"小森光徳,香川利春","高効率天然ガス供給システムにおけるガス管路網解析と耐震解析について","第25回日本シミュレーション学会大会",,,,,"pp. 13-16",2006,June
"只野耕太郎,川嶋健嗣,香川利春","空気圧シリンダを用いたマスタスレーブシステムの制御に関する考察","春季フルードパワーシステム講演会","春季フルードパワーシステム講演会",,,,"pp. 70-72",2006,June
"香川利春","高効率天然ガス供給システムにおけるガス管路網解析と耐震解析について","第25回日本シミュレーション学会大会",,,,,"pp. 13-16",2006,June
"香川利春","高圧ラインガス供給システムの動特性解析","第25回日本シミュレーション学会大会",,,,,"pp. 9-12",2006,June
"香川利春","分岐合流を有する圧縮性流体管路に対する一次元分布定数モデルの開発","第25回日本シミュレーション学会大会",,,,,"pp. 5-8",2006,June
"村上賢哉,香川利春,張小剣,川嶋健嗣,中沢親志,福山良和,戸高雄二","分岐合流を有する圧縮性流体管路に対する一次元分布定数モデルの開発","第25回日本シミュレーション学会大会",,,,,"pp. 5-8",2006,June
"香川利春","分岐合流を含む圧縮性流体管路の動特性とシミュレーション","春季フルードパワーシステム講演会",,,,,"pp. 76-78",2006,June
"香川利春","圧力微分計を用いた空気ばね式除振台のモデル追従制御","春季フルードパワーシステム講演会",,,,,"pp. 56-60",2006,June
"加藤友規,川嶋健嗣,澤本晃一,舩木達也,香川利春","スプール型サーボ弁と層流型高速流量計を用いた空圧式アクティブ除振台の制御",,"精密工学会誌論文集","社団法人　精密工学会","Vol. 72","No. 6","pp. 772-777",2006,June
"香川利春","空気圧ベローズを用いた微動ステージの制御手法による特性改善","春季フルードパワーシステム講演会",,,,,"pp. 103-105",2006,June
"宮崎里美,藤田壽憲,高木悠丞,榊和敏,宮島隆至,川嶋健嗣,香川利春","空気圧ベローズを用いた微動ステージの制御手法による特性改善","春季フルードパワーシステム講演会",,,,,"pp. 103-105",2006,June
"王涛,蔡茂林,川嶋健嗣,香川利春","準等温化圧力容器を用いた空気圧機器の流量特性計測に関する研究（熱伝達を考慮した等温化放出法の温度補償の提案）",,"日本フル―ドパワ―システム学会論文集",,"Vol. 37","No. 2","pp. 15-23",2006,Mar.
"香川利春","ガス減圧機構直後における圧縮流体の減速流れの圧力脈動",,"計測自動制御学会産業論文集",,"Vol. 5","No. 8","pp. 51-56",2006,Feb.
"香川利春","NBR類の劣化試験におけるオゾン濃度の自動制御",,"油空圧技術",,"Vol. 45","No. 9","pp. 34-38",2006,Feb.
"香川利春","準等温化圧力容器を用いた空気圧機器の流量特性計測に関する研究",,"油空圧技術",,"Vol. 45","No. 8","pp. 53-59",2006,Feb.
"香川利春","空気圧システムの省エネルギー化における問題と方策",,"フルードパワーシステム",,"Vol. 37","No. 3","pp. 17-22",2006,Feb.
"香川利春","準等温化圧力容器を用いた空気圧機器の流量特性計測に関する研究（熱伝達を考慮した等温化放出法の温度補償の提案）",,"日本フル―ドパワ―システム学会論文集",,"Vol. 37","No. 2","pp. 15-23",2006,Feb.
"TOSHIHARU KAGAWA","Power Assessment of Flowing Compressed Air",,"Trans. ASME Journal of Fluid Engineering",,"Vol. 128","No. 2","pp. 402-405",2006,Feb.
"TOSHIHARU KAGAWA","Determination of temperature recovery time in differential pressure based air leak detector",,"Measurement Science and Technology",,"Vol. 17","No. 2","pp. 213-232",2006,Feb.
"香川利春","オゾン濃度の自動制御",,"日本フル―ドパワ―システム学会論文集",,"Vol. 37","No. 2","pp. 24-28",2006,Feb.
"香川利春,蔡茂林","空気圧システムの省エネルギー化における問題と方策",,"フルードパワーシステム",,"Vol. 37","No. 3","pp. 17-22",2006,
"香川利春,王涛","準等温化圧力容器を用いた空気圧機器の流量特性計測に関する研究",,"油空圧技術",,"Vol. 45","No. 8","pp. 53-59",2006,
"香川利春,王涛","NBR類の劣化試験におけるオゾン濃度の自動制御",,"油空圧技術",,"Vol. 45","No. 9","pp. 34-38",2006,
"梅田,飯尾,池田,香川,鎌田","オゾン濃度の自動制御",,"日本フル―ドパワ―システム学会論文集",,"Vol. 37","No. 2","pp. 24-28",2006,
"Takashi MIYAJIMA,Toshinori FUJITA,Kazutoshi SAKAKI,Kenji KAWASHIMA,Toshiharu KAGAWA","Development of a Digital Control System for High-performance Pneumatic Servo Valve",,"Precision Engineering",,,,"pp. 掲載準備中",2006,