"Rei Kobayashi,MASAHIKO YOSHINO,Yuki Nakagawa","Optimization of bullseye structure on a metal surface to obtain localized enhancement of incident light","ICPE 2022","Proceedings of ICPE2022",,,,,2023,Nov.
"佐藤寛恭,中前圭人,中川佑貴,南條博,赤上陽一,中村竜太,久住孝幸,吉野雅彦","病理診断試料の薄切用ミクロトーム刃の耐久性試験","2022年度精密工学会秋季大会学術講演会","精密工学会学術講演会講演論文集",,,,"p. 278-279",2023,Aug.
"廣政航介,吉野雅彦,山中晃徳,中川佑貴","ベイズ最適化を用いた純鉄の結晶塑性パラメータの決定","第72回塑性加工連合講演会","第72回塑性加工連合講演会講演論文集",,,,"p. 149-150",2022,Oct.
"吉野雅彦,永島史悠,中川佑貴","塑性変形様式が多結晶粒内の微細変形組織に及ぼす影響","第72回塑性加工連合講演会","第72回塑性加工連合講演会講演論文集",,,,"p. 23-24",2022,Oct.
"李原,吉野雅彦,中川佑貴,山中晃徳","純鉄材の結晶粒微細化に及ぼす剪断塑性ひずみの効果","2022年度塑性加工春季講演会","2022年度塑性加工春季講演会講演論文集",,,,"p. 203-204",2022,May
"安部歩夢,吉野雅彦,廣政航介,山中晃徳,中川佑貴","単結晶純鉄の結晶塑性パラメータ推定法の検討","2022年度塑性加工春季講演会","2022年度塑性加工春季講演会講演論文集",,,,"p. 207-208",2022,May
"佐藤寛恭,吉野雅彦,北村峻祐,中川佑貴,南條博,赤上陽一,中村竜太,久住孝幸","病理診断試料の薄切における切削力および薄切片厚さの検討","2022年度精密工学会春季大会学術講演会","2022年度精密工学会春季大会講演論文集",,,,"p. 503-504",2022,Mar.
"Fumihisa Nagashima,Yuki Nakagawa,MASAHIKO YOSHINO","Numerical Analysis of Subgrain Formation during Metal Cutting and Rolling Based on the Crystal Plasticity Theory",,"Special issue of “Developments in modelling and simulation of material forming, a focus on Japan, South Korea and China”, the International Journal of Materials Forming",,,,,2022,Feb.
"Yuki Nakagawa,MASAHIKO YOSHINO,Ayumu Abe","Combined Process of 3D Printing and Joining with Metal by Fused Deposition Modelling of Plastic Parts","The 10th International Conferene on Leading Edge Manufacturing Technologies in 21st Century (LEM21)",,,,,"pp. 475-478",2022,
"Fumihisa Nagashima,MASAHIKO YOSHINO,Yuki Nakagawa","Application of metal cutting process to improvement of high performance stainless steel","18th International Conference on Precision Engineering (ICPE2020)",,,,,,2022,
"Yusuke Kubota,MASAHIKO YOSHINO,Yuki Nakagawa,長尾忠昭","Development of new type of SERS substrate fabricated by NPF method","18th International Conference on Precision Engineering (ICPE2020)",,,,,,2022,
"MASAHIKO YOSHINO,Yusuke Kubota,Yuki Nakagawa,Takatoki Yamamoto,長尾忠昭","SERS effect of rhombic Au film structure fabricated by NPF method","The 10th International Conferene on Leading Edge Manufacturing Technologies in 21st Century (LEM21)",,,,,"pp. 171-174",2022,
"吉野雅彦,永島史悠,中川佑貴,寺野元規","バニシ加工による鉄板表面の結晶粒微細化","日本機械学会2021年度年次大会",,,,,,2021,Sept.
"北村峻祐,吉野雅彦,丸山祐,中西将也,中川佑貴,南條博,赤上陽一,中村竜太,久住孝幸","病理診断のための薄切片厚さの高精度化法の検討","2021年度精密工学会秋季大会学術講演会 WEB講演会","講演論文集",,,,"p. 283-284",2021,Sept.
"廣政航介,山中晃徳,中川佑貴,吉野雅彦","単結晶純鉄の変形挙動に対する結晶方位の影響","2021年度塑性加工春季講演会 WEB講演会","2021年度塑性加工春季講演会 講演論文集",,,,,2021,June
"Ken-ichiro Mori,Tomoya Kaido,Yasutaka Suzuki,Yuki Nakagawa,Yohei Abe","Combined process of hot stamping and mechanical joining for producing ultra-high strength steel patchwork components",,"Journal of Manufacturing Processes",,"Vol. 59",,"pp. 444-455",2020,Nov.
"永島史悠,吉野雅彦,中川佑貴","強せん断加工による鉄系材料の結晶粒微細化","第71回塑性加工連合講演会","第71回塑性加工連合講演会 講演論文集",,,,"p. 161-162",2020,Nov.
"F Nagashima,Y Nakagawa,M Yoshino","Influence of Severe Plastic Deformation on Static Recrystallization Microstructure of Pure Iron",,"Metals",,"Vol. 10","No. 10","pp. 1320",2020,Oct.
"Fumihisa Nagashima,Yuki Nakagawa,Masahiko Yoshino","Study on effects of strong shear strain on recrystallized grain size of pure iron and microstructure control method","18th International Conference on Metal Forming 2020","Procedia Manufacturing",,"Vol. 50",,"pp. 248-252",2020,Sept.
"Fumihisa Nagashima,Yuki Nakagawa,Masahiko Yoshino","Study on effects of strong shear strain on recrystallized grain size of pure iron and microstructure control method","18th International Conference on Metal Forming 2020","Procedia Manufacturing",,"Vol. 50",,"pp. 248-252",2020,Sept.
"Yuki Nakagawa,Ken-ichiro Mori,Michiya Nishikata","Hot stamping of non-rectangular steel sheets using resistance heating by local preheating","18th International Conference on Metal Forming 2020","Procedia Manufacturing",,"Vol. 50",,"pp. 298-302",2020,Sept.
"吉野雅彦,青柳友之,中川佑貴","微細エンボス加工による微細金属素子の作製法",,"日本機械学会2020年度年次大会 講演論文集",,,,,2020,Sept.
"H Shen,Y Nakagawa,M Yoshino","Subtractive transfer printing process for rapid fabrication of Au nano/micro structures on a polymer substrate",,"Journal of Micromechanics and Microengineering",,"Vol. 30","No. 11","pp. 115006",2020,July
"Yuki Nakagawa,Ken-ichiro Mori,Yasutaka Suzuki,Yuki Shimizu","Tailored tempering without die heating in hot stamping of ultra-high strength steel parts",,"Materials & Design",,"Volume 192",,,2020,July
"中川佑貴","3Dプリンタ用材料開発と造形物の高精度化",,,"(株)技術情報協会",,,,2020,May
"Abdallah  Abdelkawy,,MASAHIKO YOSHINO,Yuki Nakagawa","EFFECT OF TOOL RAKE ANGLE AND CRYSTAL ORIENTATION ON DUCTILE MODE CUTTING OF HARD/BRITTLE MATERIALS",,"International Journal of Automation Technology, Special Iissue for Novel Fabrication Processes for Tailored Functional Materials and Surface",,"vol. 14","No. 2","pp. 253-259",2020,Mar.
"Abdallah  Abdelkawy,,MASAHIKO YOSHINO,Yuki Nakagawa","EFFECT OF TOOL RAKE ANGLE AND CRYSTAL ORIENTATION ON DUCTILE MODE CUTTING OF HARD/BRITTLE MATERIALS",,"International Journal of Automation Technology, Special Iissue for Novel Fabrication Processes for Tailored Functional Materials and Surface",,"vol. 14","No. 2","pp. 253-259",2020,Mar.
"MASAHIKO YOSHINO,Ryandanu Priwanta Wuryanjono,Yuki Nakagawa,Motoki Terano","Microstructure control of iron sheet surface by combination of burnishing and annealing","8th International Conference on Mechanics and Materials in Design, M2D2019",,,,,,2020,
"Chang Ye,Yuki Nakagawa,Takatoki Yamamoto,MASAHIKO YOSHINO","Development of a Double Layer Metal Nano-structure for the SERS Substrate with NPF and Chemical Etching Process","The 8th International Conference of Asian Society for Precision Engineering and Nanotechnology (ASPEN 2019)",,,,,,2019,Nov.
"Yuki Nakagawa,Ken-ichiro Mori,Tomoyoshi Maeno,Ryo Umemiya","Delayed cracking in hot stamping with hot trimming for ultra-high strength steel components",,"The International Journal of Advanced Manufacturing Technology",,"Vol. 105","No. 12","pp. 5081-5090",2019,Nov.
"Fumihisa Nagashima,Yuki Nakagawa,Motoki Terano,Atsushi  Ito,Siro  Torizuka,MASAHIKO YOSHINO","Microstructure Control of Pure Iron by Metal Cutting Technique","The 8th International Conference of Asian Society for Precision Engineering and Nanotechnology (ASPEN 2019）","Procedia Manufacturing",,,"  15","  1541?1548",2019,Nov.
"青柳友之,吉野雅彦,中川佑貴","微細エンボス加工による金属薄膜の加工特性の検討","第13回生産加工・工作機械部門講演会",,,,,,2019,Oct.
"Daixiu Wei,Yuichiro Koizumi,Makoto Nagasako,Yusuke Kubota,Tomoyuki Aoyagi,Yuki Nakagawa,Masahiko Yoshino,Akihiko Chiba,Hidemi Kato","Introducing dislocations locally in Al-supersaturated α2-Ti3Al single crystal via nanoscale wedge indentation",,"Intermetallics",,"Volume 113",,,2019,Oct.
"久保田雄介,吉野雅彦,中川佑貴","超微細塑性加工と焼鈍を組み合わせた微細金属構造の作製と光機能デバイスへの応用","第13回生産加工・工作機械部門講演会",,,,,"p. 306-310",2019,Oct.
"中西将也,吉野雅彦,中川佑貴,南條博,赤上陽一,中村竜太","病理診断用プレパラート作成のための薄切片の切削機構の検討","第13回生産加工・工作機械部門講演会,",,,,,,2019,Oct.
"中川佑貴,森謙一郎,吉野雅彦","3Dプリンティングとレーザー加熱によって製造されたCFRP部材の強度に及ぼす加工条件の影響","第70回塑性加工連合講演会","第70回塑性加工連合講演会講演論文集",,,,"  85-86",2019,Oct.
"Masahiko Yoshino,Yusuke Kubota,Yuki Nakagawa,Motoki Terano","Efficient Fabrication Process of Ordered Metal Nanodot Arrays for Infrared Plasmonic Sensor",,"Micromachines",,"Vol. 10","No. 6","pp. 385",2019,June
"横谷圭亮,LuoZichao,山中晃徳,吉野雅彦,寺野元規,中川佑貴,駱自超","単結晶純鉄の引張試験による結晶内塑性変形特性の検討","2019年度塑性加工学会春季講演会","2019年度塑性加工学会春季講演会講演論文集",,,,"pp. 203-204",2019,June
"中川佑貴,森謙一郎,吉野雅彦","3Dプリンティングされた炭素繊維強化樹脂部品におけるレーザー加熱による高強度化","2019年度塑性加工春季講演会","2019年度塑性加工春季講演会講演論文集",,,,"  159-160",2019,June
"中川佑貴,西方理也,森謙一郎,安部洋平","非矩形鋼板の通電加熱ホットスタンピングにおける部分前加熱","2019年度塑性加工春季講演会","2019年度塑性加工春季講演会講演論文集",,,,"  121-122",2019,June
"Naotaka Nakamura,Ken-ichiro Mori,Yuki Nakagawa,Takahiro Miyachi","Effect of contact pressure in die quenching on strength of hot-stamped parts","7th International Conference on Hot Sheet Metal Forming of High-performance Steel","Proceedings of 7th International Conference on Hot Sheet Metal Forming of High-performance Steel",,,,,2019,June
"中川佑貴,森謙一郎,前野智美,梅宮涼","超高強度鋼部材のホットスタンピングにおける切口面性状および機械的特性に及ぼすホットトリミング条件の影響",,"塑性と加工",,"Vol. 59","no. 694","  221-227",2018,Nov.
"中村尚誉,森謙一郎,中川佑貴,藤田智大","通電加熱ホットスタンピングにおけるリン酸と超音波洗浄を用いた酸化スケール除去","第69回塑性加工連合講演会",,,,,,2018,Oct.
"中川佑貴,森謙一郎,八嶋悟","水没金型を用いた直接水冷ホットスタンピングの複雑形状部品への適用","第69回塑性加工連合講演会",,,,,,2018,Oct.
"Yuki Nakagawa,Ken-ichiro Mori,Tomoyoshi Maeno,Yoshitaka Nakao","Reduction in holding time at bottom dead centre in hot stamping by water and die quenching","Metal Forming 2018","Procedia Manufacturing",,"  15",,"  1111-1118",2018,July
"Yuki Nakagawa,Ken-ichiro Mori,Satoru Yashima,Tomoya Kaido","Springback behaviour and quenchability in hot stamping of thick sheets","Metal Forming 2018","Procedia Manufacturing",,"  15",,"  1071-1078",2018,July
"中川佑貴,森謙一郎,鈴木康剛,清水悠希","搬送中部分冷却を用いた2段ホットスタンピングによるテーラードテンパリング","平成30年度塑性加工春季講演会","平成30年度塑性加工春季講演会講演論文集",,,,,2018,May
"Yuki Nakagawa,Ken-ichiro Mori,Tomoyoshi Maeno","Springback-free mechanism in hot stamping of ultra-high-strength steel parts and deformation behaviour and quenchability for thin sheet",,"International Journal of Advanced Manufacturing Technology","Springer London","Volume 95","  1-4","Page 459-467",2018,Mar.
"Yuki Nakagawa,Ken-ichiro Mori,Yoshimitsu Murata,Tomoyoshi Maeno","Reduction in length of transient region in successive forging of tailored blank for hot stamping of ultra-high strength steel parts","International Conference on the Technology of Plasticity, ICTP 2017","Procedia Engineering",,"  207",,"  693-698",2017,Nov.
"Yuki Nakagawa,Ken-ichiro Mori,Tomoyoshi Maeno","3D printing of carbon fibre-reinforced plastic parts",,"International Journal of Advanced Manufacturing Technology","Springer London","  91","  5-8","  2811-2817",2017,July
"Yuki Nakagawa,Ken-ichiro Mori,Tomoyoshi Maeno","Prevention of local thinning and springback in hot stamping of thin sheets","16th Metal Forming International Conference","Key Engineering Materials",,"  716",,"  487-493",2016,Oct.
"Yuki Nakagawa,Tomoyoshi Maeno,Ken-ichiro Mori","Forming and quenching behaviours in hot stamping of thin quenchable sheets","4th International Conference on New Forming Technology","MATEC Web of Conferences",,,,,2015,Aug.
"Ken-ichiro Mori,Tomoyoshi Maeno,Yuki Nakagawa","Dieless forming of carbon fibre reinforced plastic parts using 3D printer","11th International Conference on Technology of Plasticity","Procedia Engineering",,"  81",,"  1595-1600",2014,Oct.