"Shuhei Kajiyama,SHINJI KUMAI,Mitsuhiro Watanabe,石内健太郎,Tomokatsu Aizawa","電磁力による純アルミニウム板と純銅板の衝撃圧着と接合界面の解析",,"軽金属学会第111回秋期大会講演概要",,,,"pp. 255-256",2006,Nov.
"石内健太郎,SHINJI KUMAI,Mitsuhiro Watanabe,Shuhei Kajiyama,Tomokatsu Aizawa","電磁力衝撃圧着したCu/Ni，Cu/FeおよびCu/Al接合材の界面組織",,"日本金属学会第139回秋期大会講演概要",,,,,2006,Sept.
"Mitsuhiro Watanabe,SHINJI KUMAI,石内健太郎,Shuhei Kajiyama,Tomokatsu Aizawa","電磁シーム溶接した異種金属接合材の界面組織",,"軽金属学会第110回春期大会講演概要",,,,,2006,May
"Tomokatsu Aizawa,米山夏樹,SHINJI KUMAI,Mitsuhiro Watanabe","アモルファス金属箔の電磁圧接",,"溶接学会第78回春季大会講演概要",,,,"pp. 174-175",2006,Apr.
"M.Taniguchi,K.Morizumi,S.Miyazaki,S.Kumai,A.Sato","Dislocation Motion on Octahedral and Cube Planes in Fe3Ge Polycrystals",,"Philosophical Magazine",,"Vol. 86","No. 10","pp. 1327-1354",2006,
"T.Haga,H.Watari,S.Kumai","High Speed Roll Casting of Al Alloy and Mg Alloy Strips",,"World of Metallurgy",,,"No. 5","pp. 288-293",2006,
"Y.Watanabe,M.Kurahashi,I-S Kim,S.Miyazaki,S.Kumai,A.Sato,S.Tanaka","Fiber-Reinforced Functionally Graded Materials Fabricated by a Centrifugal in-situ Method from Al-Cu-Fe Ternary Alloy",,"Composites Part A",,"Vol. 37","No. 12","pp. 2186-2193",2006,
"T.Haga,M.Ikawa,H.Watari,S.Kumai","High speed twin roll casting of 6016 strip",,"Journal of Achievements in Materials and Manufacturing Engineering",,"Vol. 18","No. 1-2","pp. 371-374",2006,
"T.Haga,H.Watari,S.Kumai","High speed roll casting of Mg alloy strip by a vertical twin roll caster",,"Journal of Achievements in Materials and Manufacturing Engineering",,"Vol. 15","No. 1-2","pp. 186-192",2006,
"T.Haga,H.Sakaguchi,H.Inui,H.Watari,S.Kumai","Aluminum alloy semisolid strip casting using an uneqal  diameter twin roll caster",,"Journal of Achievements in Materials and Manufacturing Engineering",,"Vol. 14","No. 1-2","pp. 157-162",2006,
"米原牧子,熊井真次,磯野宏秋,杉林俊雄,井形直弘","5052アルミニウム合金板材の陽極酸化処理表面における光沢度と表面色に及ぼす表面粗さの影響",,"軽金属",,"Vol. 56","No. 8","pp. 429-434",2006,
"熊井真次,小林慶","AC4CHアルミニウム合金レオキャスト材およびスクイズキャスト材の引裂靱性",,"軽金属",,"Vol. 56","No. 1","pp. 21-27",2006,
"熊井真次","循環型アルミニウム材料の創製?凝固プロセスの開発と力学的特性の向上?",,"軽金属奨学会，課題研究成果報告書",,,,"pp. 1-87",2006,
"S.Kumai","Tear Toughness Evaluation of High-Quality Squeeze-Cast and Rheocast Aluminum Alloy Castings",,"Materials Science Forum",,"Vol. 519-521",,"pp. 1733-1740",2006,
"K-J.Lee,S.Kumai,N.Ishikawa,K.Furuya","Interfacial Microstructure of A6111/Steel Lap Joint Fabrication by Defocused Laser Beam Welding",,"Materials Science Forum",,"Vol. 519-521",,"pp. 1119-1124",2006,
"M.Watanabe,S.Kumai,T.Aizawa","Interfacial Microstructure of Magnetic Pressure Seam Welded Al-Fe, Al-Ni and Al-Cu Lap joints",,"Materials Science Forum",,"Vol. 519-521",,"pp. 1145-1150",2006,
"K.Suzuki,S.Kumai,K.Tokuda,T.Miyazaki,A.Ishihara,Y.Nagata,T.Haga","Solidification Structure and Casting Defect in a High-Speed Twin-Roll Cast A6022 Aluminum Alloy With Various Fe Contests",,"Materials Science Forum",,"Vol. 519-521",,"pp. 1821-1826",2006,
"K.Tokuda,S.Kumai,A.Ishihara,K.Suzuki","Influence of Iron Content and Solidification Rate on Mechanical Properties of 6022 Base Alloys",,"Materials Science Forum",,"Vol. 519-521",,"pp. 1889-1894",2006,
"T.Haga,M.Ikawa,H.Watari,S.Kumai","High speed roll casting of 6016 aluminum alloy strip",,"Manufacturing Science and Technology, ICOMAST2006",,,,"pp. 412-415",2006,
"羽賀俊雄,乾秀喜,阪口洋,熊井真次,渡利久規","異径双ロールキャスターによるA6111のロールキャスティング",,"第149回日本鋳造工学会全国講演大会講演概要集",,,,"pp. 58",2006,
"羽賀俊雄,坂口洋,乾秀喜,熊井真次,渡利久規","直径1500mm双ロールキャスタによる6000系合金のロールキャスティング",,"第149回日本鋳造工学会全国講演大会講演概要集",,,,"pp. 59",2006,
"羽賀俊雄,阪口洋,乾秀喜,熊井真次,鈴木健太,渡利久規","直径1500mm双ロールキャスタによるA6061合金のロールキャスティング",,"第148回日本鋳造工学会全国講演大会講演概要集",,,,"pp. 141",2006,
"羽賀俊雄,乾秀喜,阪口洋,熊井真次,鈴木健太,渡利久規","異径双ロールキャスターによる不純物を添加したアルミニウム合金のストリップキャスティング",,"第148回日本鋳造工学会全国講演大会講演概要集",,,,"pp. 142",2006,
"石内健太郎,渡邉満洋,梶山修平,熊井真次,相沢友勝","電磁力衝撃圧着したCu/Ni，Cu/FeおよびCu/Al接合材の界面組織",,"日本金属学会第139回大会講演概要",,,,"pp. 279",2006,
"宮崎武,徳田健二,石原暁子,永田雄介,鈴木健太,熊井真次,羽賀俊雄","高速双ロールキャストした6022アルミニウム合金板材の鋳造割れ抑制",,"日本金属学会第138回大会講演概要",,,,"pp. 407",2006,
"羽賀俊雄,阪口洋,乾秀喜,熊井真次,渡利久規","異径双ロールキャスターによるA6111合金板の作製",,"第57回塑性加工連合講演会講演論文集",,,,"pp. 129-130",2006,
"羽賀俊雄,乾秀喜,阪口洋,熊井真次,渡利久規","直径1500mm双ロールキャスターによる6000系Al合金板の作製",,"第57回塑性加工連合講演会講演論文集",,,,"pp. 335-336",2006,
"羽賀俊雄,阪口洋,乾秀喜,渡利久規,熊井真次,鈴木健太","直径1500mm双ロールキャスターによるA6061合金板の作製",,"平成18年度塑性加工春季講演会講演論文集",,,,"pp. 19-20",2006,
"羽賀俊雄,乾秀喜,阪口洋,熊井真次,鈴木健太,渡利久規","異径双ロールキャスターを用いたリサイクルアルミニウムのロールキャスティング",,"平成18年度塑性加工春季講演会講演論文集",,,,"pp. 271-272",2006,
"羽賀俊雄,乾秀喜,阪口洋,熊井真次,鈴木健太,渡利久規","異径双ロールキャスターによる鋳造用合金のストリップキャスティング",,"平成18年度塑性加工春季講演会講演論文集",,,,"pp. 273-274",2006,
"羽賀俊雄,阪口洋,乾秀喜,渡利久規,熊井真次","直径1500mm双ロールキャスターによるA6061合金板の作製",,"2006年度日本機械学会年次大会講演論文集",,,,"pp. 137-138",2006,
"羽賀俊雄,乾秀喜,阪口洋,熊井真次,渡利久規","異径双ロールキャスターによる鋳造用合金の半凝固ストリップキャスティング",,"2006年度日本機械学会年次大会講演論文集",,,,"pp. 139-140",2006,
"羽賀俊雄,乾秀喜,阪口洋,渡利久規,熊井真次,鈴木健太","直径1500mm双ロールキャスターによるAl合金板の作製",,"第81回日本機械学会関西支部定時総会講演会講演論文集",,,,"pp. 26-27",2006,
"SHINJI KUMAI","Semisolid casting of aluminum alloy strip and its properties",,"Solid State Phonomena",,"Vol. 116-117",,"pp. 379-382",2006,
"乾秀喜,羽賀俊雄,阪口洋,熊井真次,鈴木健太,渡利久規","異径双ロールキャスターによるA5182のストリップキャスティング",,"第81回日本機械学会関西支部定時総会講演会講演論文集",,,,"pp. 27-28",2006,
"Mitsuhiro Watanabe,SHINJI KUMAI,Tomokatsu Aizawa","Interfacial Microstructure of Magnetic Pressure Seam Welded Al-Fe, Al-Ni and Al-Cu Lap Joints",,"Materials Science Frorum",,"Vol. 519-521",,"pp. 1145-1150",2006,
"K-J.Lee,S.Kumai","Characterization of Intermetallic Compound Layer Formed at the Weld Interface of the Defocused Laser Welded Low Carbon Steel/6111 Aluminum Alloy Lap Joint",,"Materials Transactions",,"Vol. 47","No. 4","pp. 1178-1185",2006,
"Y.Yamaguchi,S.Miyazaki,S.Kumai,A.Sato","Strengthening of a FeMnSi-based Shape Memory Alloy by Dispersion of χ-phase Domains",,"Philosophical Magazine",,"Vol. 86","No. 27","pp. 4319-4340",2006,