"米田 康祐,羽賀 俊雄,SHINJI KUMAI,渡利 久規","207 縦型高速双ロールキャスターによる5182合金薄板作製における巣の改善(溶融加工・半凝固加工,ものづくりにおける基礎研究と先端技術の融合)",,"機械材料・材料加工技術講演会講演論文集","一般社団法人日本機械学会","Vol. 2010","No. 18","pp. "207-1"-"207-3"",2010,Nov.
"秋津 和哉,羽賀 俊雄,SHINJI KUMAI,渡利 久規","204 スクレイパーを用いたロールキャスターによるアルミニウム合金板の作製(溶融加工・半凝固加工,ものづくりにおける基礎研究と先端技術の融合)",,"機械材料・材料加工技術講演会講演論文集","一般社団法人日本機械学会","Vol. 2010","No. 18","pp. "204-1"-"204-4"",2010,Nov.
"Yoshie Kunimoto,unknown unknown,Yohei Harada,SHINJI KUMAI","Al-Si合金高速双ロールキャスト材の粒状晶帯ならびに内部割れ発生に及ぼすSi組成の影響","軽金属学会 第119回秋期大会","講演概要集",,,,"p. 325",2010,Nov.
"Takeshi Hoshino,Yohei Harada,SHINJI KUMAI","高速双ロールキャストしたAl-11%Si-2.5%Cu合金板の組織と機械的性質","軽金属学会 第119回秋期大会","講演概要集",,,,"p. 73",2010,Nov.
"KEYAN FENG,Mitsuhiro Watanabe,SHINJI KUMAI","摩擦撹拌スポット接合したアルミニウム合金板とめっき鋼板の組織と強度に及ぼす接合時間の影響","軽金属学会第119回秋期講演大会","軽金属学会第119回秋期大会講演概要集",,,,"pp. 117-118",2010,Nov.
"山林 尚史,羽賀 俊雄,SHINJI KUMAI,渡利 久規","205 異径双ロールキャスターによるアルミニウム合金クラッド材の作製(溶融加工・半凝固加工,ものづくりにおける基礎研究と先端技術の融合)",,"機械材料・材料加工技術講演会講演論文集","一般社団法人日本機械学会","Vol. 2010","No. 18","pp. "205-1"-"205-3"",2010,Nov.
"中村 亮司,羽賀 俊雄,SHINJI KUMAI,渡利 久規","203 クラッド材作製用縦型タンデム双ロールキャスターの特性(溶融加工・半凝固加工,ものづくりにおける基礎研究と先端技術の融合)",,"機械材料・材料加工技術講演会講演論文集","一般社団法人日本機械学会","Vol. 2010","No. 18","pp. "203-1"-"203-3"",2010,Nov.
"unknown unknown,Yohei Harada,SHINJI KUMAI","高速ロールキャストしたAl-Si合金板材の内部割れ発生に及ぼす凝固組織の影響","日本鋳造工学会 第157回全国講演大会","講演概要集",,,,"p. 20",2010,Oct.
"Y. Harada,S. Tamura,S. Kumai","EFFECT OF SOLUTION HEAT TREATMENT CONDITION ON MICROSTRUCTURE AND TEAR TOUGHNESS IN A356 CAST ALLOYS","2010 Asian Forum on Light Metals","Program and Abstract Book",,,,"p. 38",2010,Oct.
"Keyan Feng,Mitsuhiro Watanabe,Shinji Kumai","Joining of aluminum alloy sheet to plated steel sheet by friction stir spot welding","2010 Asia Forum on Light Metals","Abstracts of 2010 Asia Forum on Light Metals",,,,"pp. 38",2010,Oct.
"Shougo Kakizaki,Mitsuhiro Watanabe,Shinji Kumai","Metal Jet Emission and Wavy Interface Formation in High-speed Impact Welding",,"Proceedings of the 12th International Conference of Aluminum Alloys (ICAA12)",,,,"pp. 945-949",2010,Sept.
"Feng Keyan,Mitsuhiro Watanabe,Shinji Kumai","Microstructure and Joint Strength of Friction Stir Spot Welded Aluminum Alloy Sheet and Plated Steel Sheets",,"Proceedings of the 12th International Conference of Aluminum Alloys (ICAA12)",,,,"pp. 1806-1810",2010,Sept.
"Y. Harada,S. Tamura,S. Kumai","Microstructural Change during Solution Heat Treatment and Its Effect on Tear Toughness in A356 Cast Alloys","ICAA12 (The 12th International Conference on Aluminium Alloys)","Proceedings of ICAA12 (The 12th International Conference on Aluminium Alloys)",,,,"pp. 663-668",2010,Sept.
"Shinji Kumai,Keisuke Hayashida,Mitsuhiro Watanabe","High-speed Solid-state Welding of 2xxx Aluminum Alloy Studs to 5xxx Aluminum Alloy Plates",,"Proceedings of the 12th International Conference of Aluminum Alloys (ICAA12)",,,,"pp. 940-944",2010,Sept.
"Mitsuhiro Watanabe,Keyan Feng,Yoshio Nakamura,Shinji Kumai","Growth Manner of Intermetallic Compound Layer Produced at Friction Stir Spot Welded Al/Steel Lap Joint",,"Proceedings of the 12th International Conference of Aluminum Alloys (ICAA12)",,,,"pp. 984-987",2010,Sept.
"Mitsuhiro Watanabe,Shinji Kumai","Welding interface in magnetic pulse welded joints",,"Materials Science Forum",,"Vol. 654-656",,"pp. 755-758",2010,Aug.
"Shinji Kumai,Mitsuhiro Watanabe,Keyan Feng","Microstructure and joint strength of similar- and dissimilar lap joints fabricated by several advanced solid-state welding methods",,"Materials Science Forum",,"Vol. 654-656",,"pp. 596-601",2010,Aug.
"Keyan Feng,Mitsuhiro Watanabe,Shinji Kumai","Joint interface morphology of friction stir spot welded aluminum alloy sheets and plated steel sheets",,"Materials Science Forum",,"Vol. 654-656",,"pp. 970-973",2010,Aug.
"Daisuke Shimosaka,Yohei Harada,SHINJI KUMAI,Federico Casarotto,渡邉修一郎","Al-Mg-Si-Mn系合金の引裂靭性に及ぼす第二相粒子の影響","日本鋳造工学会 第156回全国講演大会","講演概要集",,,,"p. 58",2010,May
"Tomokatsu Aizawa,岡川啓悟,SHINJI KUMAI,Mitsuhiro Watanabe","電磁シーム溶接された各種金属薄板の接合界面","日本塑性加工学会","日本塑性加工学会第41回春季大会講演概要",,,,,2010,May
"Shougo Kakizaki,Mitsuhiro Watanabe,SHINJI KUMAI","アルミニウム板の高速衝撃圧着時のメタルジェット放出挙動","第118回春期軽金属学会","軽金属学会第118回春期大会講演概要集",,,,"  119-120",2010,May
"SHINJI KUMAI,Keisuke Hayashida,Mitsuhiro Watanabe","アルミニウム合金スタッド接合材の破壊様式と接合界面組織との関係","第118回春期軽金属学会","軽金属学会第118回春期大会講演概要集",,,,"pp. 121-122",2010,May
"Mitsuhiro Watanabe,Hiroshi Matsumoto,Keyan Feng,Yoshio Nakamura,Shinji Kumai","Effect of tool shape on interfacial microstructure of friction stir spot welded aluminum/steel lap joint","The 8th International Symposium of Friction Stir Welding","Proceedings of The 8th International Symposium of Friction Stir Welding",,"  CD-ROM",,,2010,May
"原田陽平,田村信一,熊井真次","時効硬化型AC4CHアルミニウム合金の引裂靭性に及ぼす溶体化処理条件の影響","日本金属学会2010年春期（第146回）大会","講演概要集",,,,"p. 146",2010,Mar.
"SHINJI KUMAI","Inline rolling of 5182 aluminum alloy strip cast by a vertical type high speed twin roll caster",,"Advanced Materials Research",,"Vol. 139-141",,"pp. 477-480",2010,
"山林 尚史,秋津 和哉,羽賀 俊雄,SHINJI KUMAI,渡利 久規","異径双ロールキャスターにより作製したアルミニウム合金クラッド材の性質",,"鋳造工学 全国講演大会講演概要集","公益社団法人 日本鋳造工学会","Vol. 156",,"pp. 103-103",2010,
"Nakamura, R.,Haga, T.,SHINJI KUMAI,Watari, H.","Casting of aluminium alloy clad strip using a vertical type tandem twin roll Caster",,"Proceedings of the 36th International MATADOR Conference",,"Vol. 2010-January",,"pp. 37-40",2010,
"Akitsu, K.,Haga, T.,SHINJI KUMAI,Watari, H.","Casting of aluminum alloy strip by improved single-roll caster",,"Proceedings of the 36th International MATADOR Conference",,"Vol. 2010-January",,"pp. 29-32",2010,
"Serizawa, H.,Shibahara, I.,Rashed, S.,Murakawa, H.,SHINJI KUMAI","Effect of various factors on interface formation in magnetic pressure seam welding",,"Ceramic Engineering and Science Proceedings",,"Vol. 31","No. 8","pp. 175-182",2010,
"Nakamura, R.,Haga, T.,Tsuge, H.,Watari, H.,SHINJI KUMAI","Roll casting of aluminum alloy clad strip",,"AIP Conference Proceedings",,"Vol. 1315",,"pp. 650-655",2010,
"Kim,M.-S.,Arai, Y.,Hon, Y.,SHINJI KUMAI","Formation of internai crack in high-speed twin-roll cast 6022 aluminum alloy strip",,"Materials Transactions",,"Vol. 51","No. 10","pp. 1854-1860",2010,
"Haga, T.,Sawai, M.,Nakamura, R.,Watari, H.,SHINJI KUMAI","Casting of clad strip by an unequal diameter twin roll caster",,"Materials Science Forum",,"Vol. 638-642",,"pp. 413-418",2010,
"Miyazaki, S.,SHINJI KUMAI,Sato, A.","Plastic deformation of a monoclinic Al13Fe4at 300 ? 873 K",,"Philosophical Magazine",,"Vol. 90","No. 19","pp. 2597-2618",2010,
"SHINJI KUMAI","Clad strip casting by a twin roll caster",,"Archives of Materials Science and Engineering",,"Vol. 37",,"pp. 117-124",2010,
"SHINJI KUMAI","Roll caster for the three-layer clad-strip",,"Archives of Materials Science and engineering",,"Vol. 41",,"pp. 112-120",2010,
"SHINJI KUMAI","Roll casting of Al-25%Si alloy",,"Advanced Materials Research",,"Vol. 97-101",,"pp. 1057-1060",2010,
"SHINJI KUMAI","Casting of aluminum alloy clad strip using a vertical type tandem twin roll caster",,"Advanced Materials Research",,"Vol. 97-101",,"pp. 1053-1056",2010,
"SHINJI KUMAI","Roll casting of three layers clad strip",,"Key Engineering Materials",,"Vol. 443",,"pp. 128-133",2010,
"SHINJI KUMAI","Strip casting by a single roll caster equipped with a scraper",,"Key Engineering Materials",,"Vol. 443",,"pp. 122-127",2010,
"SHINJI KUMAI","Roll casting of Al-SiCp strip",,"Materials Science Forum",,"Vol. 654-656",,"pp. 978-981",2010,
"SHINJI KUMAI","In-line rolling of aluminum alloy strip cast by a high speed twin roll caster",,"Materials Science Forum",,"Vol. 654-656",,"pp. 795-798",2010,
"柘植 浩志,羽賀 俊雄,中村 亮司,SHINJI KUMAI,渡利 久規","縦型タンデム双ロールキャスターにより鋳造したアルミニウム合金クラッド材の特性",,"鋳造工学 全国講演大会講演概要集","公益社団法人 日本鋳造工学会","Vol. 156",,"pp. 102-102",2010,
"SHINJI KUMAI","Roll casting of Al-SiCp composite strip",,"Advanced Materials Research",,"Vol. 139-141",,"pp. 481-484",2010,