"Takashi Kambe,Shinji Muraishi,SHINJI KUMAI","Experimental and Numerical Analysis of MPW and MPF of Al Sheet","14th International Aluminium Conference (INALCO2019)","Proceedings of 14th International Aluminium Conference (INALCO2019)",,,,,2019,Nov.
"Yusei Kawamura,Mitsuhiro Watanabe,SHINJI KUMAI","電磁圧接したアルミニウム板/アルミニウムめっき鋼板接合材の界面組織","軽金属学会第137回秋期講演大会","軽金属学会第137回秋期講演大会講演概要集",,,,"pp. 183-184",2019,Nov.
"Maya Okihara,Shinji Muraishi,SHINJI KUMAI","調質の異なる1050アルミニウム板の電磁圧接界面","軽金属学会 第137回秋期講演大会","軽金属学会 第137回秋期講演大会講演概要集",,,,,2019,Nov.
"Y. Harada,N. Jiang,S. Kumai","Mechanical properties of cold-rolled and annealed Al-12%Mg alloy sheet with high Mg solid solubility fabricated from vertical-type high-speed twin-roll cast strip",,"Materials Transactions",,"Vol. 60","No. 11","pp. 2435-2441",2019,Nov.
"Kawamura Yusei,Mitsuhiro Watanabe,SHINJI KUMAI","Interface structure and strength of aluminum/aluminum-coated steel joint fabricated using magnetic pulse welding","14th International Aluminum Conference (INALCO2019)","Proceedings of 14th International Aluminum Conference (INALCO2019)",,,,,2019,Nov.
"Maya Okihara,Shinji Muraishi,SHINJI KUMAI","調質の異なる1050アルミニウム板の電磁圧接界面","軽金属学会第137回秋期講演大会","軽金属学会第137回秋期講演大会講演概要",,,,,2019,Nov.
"Shingo Kimura,Shinji Muraishi,SHINJI KUMAI","Al/CuおよびAl/Niの電磁圧接界面における類似点と相違点","軽金属学会第137回秋期講演大会","軽金属学会第137回秋期講演大会講演概要",,,,,2019,Nov.
"Mitsuhiro Watanabe,Shinji Kumai","Dissimilar Metal Lap Joining of A5052 Aluminum Alloy Plate and TP340 Pure Titanium Plate by Magnetic Pulse Welding",,"Proceedings of the 14th International Aluminium Conference (INALCO2019)",,,,,2019,Nov.
"Shingo Kimura,Shinji Muraishi,SHINJI KUMAI","Numerical Analysis of Wavy Interface Formation in MPWed Al/Cu Joint","14th International Aluminium Conference (INALCO2019)","Proceedings of 14th International Aluminium Conference (INALCO2019)",,,,,2019,Nov.
"Yohei Harada,Taichi Asakura,Shinji Kumai","Joining of Aluminum Alloy Stud and Aluminum alloy/Resin Composite Panel by Solid-State Stud-Welding",,"Proceedings of the 14th International Aluminum Conference (INALCO2019)",,,,,2019,Nov.
"Maya Okihara,Shinji Muraishi,Shinji Kumai","Welding Interface of MPWed Aluminium Plates with Different Hardness",,"Proceedings of the 14th International Aluminium Conference (INALCO2019)",,,,,2019,Nov.
"Jiedi Li,Shinji Muraishi,Shinji Kumai","Influence of Kinetic Parameters on Interface Formation of Al/Fe Magnetic Pulse Welded Joints",,"Proceedings of the 14th International Aluminium Conference (INALCO2019)",,,,,2019,Nov.
"Takashi Kambe,Shinji Muraishi,Shinji Kumai","Experimental and Numerical Analysis of MPW and MPF of Al Sheet",,"The 14th International Aluminium Conference (INALCO2019)",,,,,2019,Nov.
"Jiedi Li,Shinji Muraishi,SHINJI KUMAI","Influence of Kinetic Parameters on Interfacial Morphology of Al/Fe Magnetic Pulse welded Joints","14th International Aluminium Conference (INALCO2019)","Proceedings of 14th International Aluminium Conference (INALCO2019)",,,,,2019,Nov.
"Min-Seok Kim,Hyoung-Wook Kim,Su-Hyeon Kim,Shinji Kumai","Role of Roll Separation Force in High-Speed Twin-Roll Casting of Aluminum Alloys",,"Metals",,"Vol. 9",,,2019,Sept.
"Takayuki Maruyama,Yohei Harada,SHINJI KUMAI","タンデム式縦型高速双ロールキャスト法を用いたAl-Zn/Al-Mn/Al-Si系合金クラッド材の作製","（公社）日本鋳造工学会 第174回全国講演大会","講演概要集",,,,"p. 33",2019,Sept.
"Yushi Yokoi,Yohei Harada,SHINJI KUMAI","縦型高速双ロールキャスト法により作製した高Mg組成Al-Mg合金板の機械的性質","（公社）日本鋳造工学会 第174回全国講演大会","講演概要集",,,,"p. 32",2019,Sept.
"Yuta Sano,Shinji Muraishi,Yohei Harada,Shinji Kumai","Effect of GP(I) and GP(II) Zones on Precipitation Microstructure and Hardness in A7050 Aluminum Alloy by Means of Two Step Aging","The 10th Pacific Rim International Conference on Advanced Materials and Processing",,,,,,2019,Aug.
"Ryo Muramatsu,Shinji Muraishi,Shinji Kumai","Indentation Microstructure and Stress Analysis of Age-Hardenable 7050 Aluminum Alloy","The 10th Pacific Rim International Conference on Advanced Materials and Processing",,,,,,2019,Aug.
"Tomoo Goda,SHINJI KUMAI","Center Segregation and Cross-Hatched Surface Pattern of Vertical-Type High-Speed Twin-Roll Cast Al-Si-Mg Alloy Strip Formed by Wide Rolls",,"Materials Transactions",,"Vol. 60","No. 11","pp. 1643-1650",2019,Aug.
"Yusei Kawamura,Mitsuhiro Watanabe,SHINJI KUMAI","アルミニウム/アルミニウムめっき鋼電磁圧接材の界面組織と強度","軽金属学会関東支部2019年度若手研究者講演発表会","軽金属学会関東支部2019年度若手研究者講演発表会概要集",,,,"p. 3",2019,Aug.
"Tomoo Goda,Shinji Kumai","Center Segregation and Cross-Hatched Surface Pattern of Vertical-Type High-Speed Twin-Roll Cast Al-Si-Mg Alloy Strip Formed by Wide Rolls",,"Materials Transactions",,"Vol. 60","No. 8","pp. 1643 to 1650",2019,Aug.
"Yusuke Takayama,Yohei Harada,Shinji Muraishi,SHINJI KUMAI","タンデム式縦型高速双ロールキャスト法により作製したA3003/A4045クラッド材界面の接合状態",,"鋳造工学",,"Vol. 91","No. 7","pp. 420-426",2019,July
"Yuta Kumagai,Akika Uchida,Yu Nagashima,Mitsuhiro Watanabe,SHINJI KUMAI","Al/Mg電磁圧接材の強度に及ぼす界面組織の影響","2019年度軽金属溶接協会年次講演大会",,,,,,2019,June
"SHINJI KUMAI","My Favorite Things ー大学、研究室、学生諸君、そしてアルミニウムー",,"軽金属",,"Vol. 69","No. 6","  315 - 324",2019,June
"Takashi Kambe,Shinji Muraishi,SHINJI KUMAI","電磁成形および電磁圧接したアルミニウム板の組織変化と熱履歴の数値解析","軽金属溶接協会年次講演大会","軽金属溶接協会年次講演大会概要",,,,,2019,June
"Takashi Kambe,Shinji Muraishi,SHINJI KUMAI","電磁成形および電磁圧接したアルミニウム板の組織変化と熱履歴の数値解析","軽金属溶接協会 年次講演大会","軽金属溶接協会 年次講演大会講演概要集",,,,,2019,June
"Simin Lei,Li Gao,Yohei Harada,Shinji Kumai","Microstructure analysis of quenched semi-solid A356 aluminum alloy slurry by using Weck’s reagent","（一社）軽金属学会 第136回春期大会","講演概要集",,,,"pp. 135-136",2019,May
"Shingo Kimura,Shinji Muraishi,SHINJI KUMAI","Al/Cu電磁圧接界面形態に及ぼす衝突角度の影響","軽金属学会第136回春期講演大会","軽金属学会第136回春期講演大会講演概要",,,,,2019,May
"Jiedi Li,Shinji Muraishi,SHINJI KUMAI","運動量パラメータ―がAl-Fe電磁圧接界面に生成する中間層と温度履歴に及ぼす影響","軽金属学会第136回春期講演大会","軽金属学会第136回春期講演大会講演概要",,,,,2019,May
"Takashi Kambe,Shinji Muraishi,SHINJI KUMAI","電磁成形したアルミニウム板の最表面に形成される高速変形組織と変形挙動の数値解析","軽金属学会第136回春期講演大会","軽金属学会第136回春期講演大会講演概要",,,,,2019,May
"SHINJI KUMAI","衝撃圧接による異種金属の接合",,"日本機械学会誌",,"Vol. 122","No. 1206","pp. 12 - 15",2019,May
"Shingo Kimura,Shinji Muraishi,SHINJI KUMAI","Al/Cu電磁圧接界面形態に及ぼす衝突角度の影響","軽金属学会 第136回春期講演大会","軽金属学会 第136回春期講演大会講演概要集",,,,,2019,May
"Jiedi Li,Shinji Muraishi,SHINJI KUMAI","運動量パラメーターがAl-Fe電磁圧接界面に生成する中間層と温度履歴に及ぼす影響","軽金属学会 第136回春期講演大会","軽金属学会 第136回春期講演大会講演概要集",,,,,2019,May
"Takashi Kambe,Shinji Muraishi,SHINJI KUMAI","電磁成形したアルミニウム板の最表面に生成される高速変形組織と変形挙動の数値解析","軽金属学会 第136回春期講演大会","軽金属学会 第136回春期講演大会講演概要集",,,,,2019,May
"Hiroki Shinohara,Tomoo Goda,Yohei Harada,SHINJI KUMAI","縦型高速双ロールキャスト法により作製したAl-7%Si合金薄板の圧下率増加によるRD, TD破断伸びの解消","（公社）日本鋳造工学会 第173回全国講演大会","講演概要集",,,,"p. 93",2019,May
"Thai Ha Nguyen,Ram Song,Yohei Harada,Shinji Muraishi,Shinji Kumai","Castability and microstructural evolution of high manganese-containing Al-Mn-Si alloys fabricated by vertical-type high-speed twin-roll casting","（一社）軽金属学会 第136回春期大会","講演概要集",,,,"pp. 269-270",2019,May
"Keisuke Sano,Shinji Muraishi,Yohei Harada,SHINJI KUMAI","A7050アルミニウム合金の時効析出挙動に及ぼす予備時効後の成形加工と2段目時効の効果","（一社）軽金属学会 第136回春期大会","講演概要集",,,,"pp. 19-20",2019,May
"Ryo Muramatsu,Shinji Muraishi,Yohei Harada,SHINJI KUMAI","A7050析出強化型アルミニウム合金のナノインデンテーションによる微細組織と応力解析","（一社）軽金属学会 第136回春期大会","講演概要集",,,,"pp. 345-346",2019,May
"SHINJI KUMAI","鉄鋼/Al合金の異材接合とその機構","日本鉄鋼協会第177回春季講演大会","日本鉄鋼協会第177回春季講演大会講演概要集",,,,,2019,Mar.
"SHINJI KUMAI","強くて優しい社会基盤材料を創るー東工大 熊井・村石研究室ー",,"精密工学会誌",,"Vol. 85","No. 3","pp. 251-252",2019,Mar.
"Ram Song,Shinji Kumai","Solidification Structure and Secondary Particles in Vertical-Type High-Speed Twin-Roll Cast 3003 Aluminum alloy Strip",,"Materials Transactions",,"Vol. 60","No. 2","  322 to 329",2019,Feb.
"D. Kikuchi,Y. Harada,S. Kumai","Surface quality and microstructure of Al-Mg alloy strips fabricated by vertical-type high-speed twin-roll casting",,"Journal of Manufacturing Processes",,"Vol. 37",,"pp. 332-338",2019,Jan.
"Yohei Harada,Nan Jiang,SHINJI KUMAI","縦型高速双ロールキャストしたAl-Mg合金板の表面模様に及ぼすMg含有量の影響",,"鋳造工学",,"Vol. 91","No. 1","pp. 21-27",2019,Jan.
"Shingo Kimura,Shinji Muraishi,SHINJI KUMAI","Al/CuおよびAl/Niの電磁圧接界面における相違点と類似点","軽金属学会 第137回秋期講演大会","軽金属学会 第137回秋期講演大会講演概要集",,,,,2019,