"Motoki Amiya,Wataru Takarada,Takeshi Kikutani","Enhancement of Fiber Strength of Various Polyesters utilizing CO2 Laser Irradiation in Melt Spinning Process","AWPP2013",,,,,,2013,Dec.
"Yiwen Chen,Wataru Takarada,Takeshi Kikutani","On-line measurement and numerical simulation for melt-spinning process of bicomponent fibers with different cross-sectional configuration","Polymer Processing Society Asia/Australia Conference",,,,,,2013,Dec.
"Takeshi Kikutani","Film stretching behavior - fundamental analysis through in-situ measurements","Polymer Processing Society Asia/Australia Conference",,,,,,2013,Dec.
"TAKESHI KIKUTANI","Contribution of Flow-Induced Crystallization on Surface Roughness Development In Melt Spinning of Blend Fibers for Artificial Hair","AWPP2013",,,,,,2013,Dec.
"Yuanjing Zhang,Wataru Takarada,Takeshi Kikutani","Spinning behavior of bicomponent fibers in spunbonding process for preparing fiber reinforced composites","Seikei-Kakou Autumnal Meeting 2013","Preprints of Seikei-Kakou Autumnal Meeting 2013","Japan society of polymer processing",,,"pp. 307-308",2013,Oct.
"Motoki Amiya,Masato Masuda,Wataru Takarada,Takeshi Kikutani","Development of High-strength Fibers of Various Polyesters","The 12th Asian Textile Conference",,,,,,2013,Oct.
"Yiwen Chen,Wataru Takarada,Takeshi Kikutani","Effect of Coss-sectional Cnfiguration on Fber Formation Behavior","The 12th Asian Textile Conference",,,,,,2013,Oct.
"杉浦 聡,宝田 亘,鞠谷 雄士","溶融紡糸・延伸法による複合中空糸膜の作製条件と膜特性の関係","プラスチック成形加工学会 第21回秋季大会","成形加工シンポジア ’１３","プラスチック成形加工学会",,,"pp. 243-244",2013,Oct.
"岩崎 年晴,宝田 亘,鞠谷 雄士","多層オレフィンフィルムのヒートシール物性の発現機構とヒートシール条件の最適化 ーヒートシール強度の熱処理条件の影響ー","プラスチック成形加工学会 第21回秋季大会","成形加工シンポジア ’１３","プラスチック成形加工学会",,,"pp. 235-236",2013,Oct.
"鞠谷 雄士","溶融紡糸過程における伸長流動制御による繊維の高性能・高機能化","プラスチック成形加工学会 第21回秋季大会","成形加工シンポジア ’１３","プラスチック成形加工学会",,,"pp. 21-22",2013,Oct.
"森岡 英樹,宝田 亘,鞠谷 雄士","新規結晶性ポリシクロオレフィンの高速紡糸における繊維構造形成","プラスチック成形加工学会 第21回秋季大会","成形加工シンポジア ’１３","プラスチック成形加工学会",,,"pp. 309-310",2013,Oct.
"Qing Qin,wataru takarada,TAKESHI KIKUTANI","Enhancement of the crystallization of PHBH by applying high-speed melt spinning process","平成25年度 繊維学会秋期研究発表会","Fiber preprints, Japan","The Society of Fiber Science and Technology, Japan","Vol. 68","No. 2","pp. 148",2013,Sept.
"鞠谷雄士","溶融紡糸法による高機能繊維","平成25年度 繊維学会秋期研究発表会","繊維学会予稿集 2013","繊維学会","Vol. 68","No. 2","pp. 140",2013,Sept.
"阿部尭永,宝田亘,鞠谷雄士","ポリエチレンナフタレートフィルムの伸長・緩和過程における配向挙動に及ぼす予備加熱効果","平成25年度 繊維学会秋期研究発表会","繊維学会予稿集 2013","繊維学会","Vol. 68","No. 2","pp. 81",2013,Sept.
"高田裕貴,宝田亘,鞠谷雄士","ガラス転移温度近傍における非晶フィルムの伸長・緩和挙動の解析","平成25年度 繊維学会秋期研究発表会","繊維学会予稿集 2013","繊維学会","Vol. 68","No. 2","pp. 20",2013,Sept.
"Takeshi Kikutani,Yuan Jing Zhang,Wataru Takarada","Utilization of Bicomponent Melt Spinning Process for Preparation of Fiber-Reinforced Composites","12th IUMRS International Conference on Advanced Materials",,,,,,2013,Sept.
"阿部尭永,宝田亘,鞠谷雄士","ポリエステルフィルムの1軸・2軸伸長における結晶配向挙動に及ぼす予備加熱効果","第62回 高分子討論会","高分子学会予稿集",,"Vol. 62","No. 2","  CD-ROM",2013,Aug.
"Radon Dhelika,Kenji Sawai,Kunio Takahashi,Wataru Takarada,Takeshi Kikutani,Shigeki Saito","Electrostatic chuck consisting of polymeric electrostatic inductive fibersfor handling of objects with rough surfaces",,"Smart Materials and Structures",,,"No. 22","pp. 9",2013,Aug.
"Okamoto kenya,takarada wataru,takebe tomoaki,minami yutaka,Youhei Kohri,kanai toshitataka,kikutani takeshi","Effect of cross-sectional configuration on fiber properties in bicomponent melt spinning of polypropylenes with different stereo regularity","29th Internatnional Conference of the Polyemr Processing Society","Proceedings of the 29th Internatnional Conference of the Polyemr Processing Society",,"  USB",,,2013,July
"Xu Chen,Yamamoto Kiyoshi,Takarada Wataru,Kikutani Takeshi","Atmospheric pressure dyeability of poly(ethlene terephthalate) / poly(trimethylene terephthalate) blend fiber","29th Internatnional Conference of the Polyemr Processing Society","Proceedings of the 29th Internatnional Conference of the Polyemr Processing Society",,"  USB",,,2013,July
"Takeshi Kikutani","Effect of pre annealing on streching behavior of poly(ethylene naphthalate) films","29th Internatnional Conference of the Polyemr Processing Society","Proceedings of the 29th Internatnional Conference of the Polyemr Processing Society",,"  USB",,,2013,July
"Zhang Yuan Jing,Takarada Wataru,Kikutani Takeshi","Utilization of spunbonding process of bicomponent fibers for preparation of fiber reinforced composites","29th Internatnional Conference of the Polyemr Processing Society","Proceedings of the 29th Internatnional Conference of the Polyemr Processing Society",,"  USB",,,2013,July
"小野里翔大,花田基洋,市川 菫,河原 豊,宝田 亘,鞠谷雄士","高速紡糸PLA/PBT複合繊維の構造","平成25年度 繊維学会年次大会","繊維学会予稿集 2013","繊維学会","Vol. 68","No. 1","  CD-ROM",2013,June
"Takeshi Kikutani","Crystallization of Polymers of Low Crystallizability in Polymer Processing","International Discussion Meeting on Polymer Crystallization",,,,,,2013,June
"網谷 基氣,宝田 亘,鞠谷 雄士","溶融紡糸過程における炭酸ガスレーザー照射による各種ポリエステル繊維の高強度化","平成25年度 繊維学会年次大会","繊維学会予稿集 2013","繊維学会","Vol. 68","No. 1","  CD-ROM",2013,June
"Y. Chen,W. Takarada,T. Kikutani","Effect of cross-sectional configuration of fibers on fiber formation behavior in bicomponent melt spinning process","平成25年度 繊維学会年次大会","Fiber preprints, Japan","The Society of Fiber Science and Technology, Japan","Vol. 68","No. 1","  CD-ROM",2013,June
"阿部尭永,宝田亘,鞠谷雄士","ポリエチレンナフタレートフィルムの伸長・緩和過程における三次元的配向挙動に及ぼす予備加熱の効果","プラスチック成形加工学会 第２４回年次大会","成形加工’１３",,,,"pp. 233-234",2013,May
"Renukarn,Wataru Takarada,Takeshi Kikutani","Effect of Polymer Characteristics on Fiber Formation Behavior and Web Properties in Melt Blowing Process - Comparison of Polymethylpentene and Polypropylene �","プラスチック成形加工学会 第２４回年次大会","Preprints of Seikei-Kakou Annual Meeting 2013",,,,"pp. 231-232",2013,May
"杉浦聡,宝田亘,鞠谷雄士","ポリプロピレン中空糸の膜特性と溶融紡糸・延伸条件の関係","プラスチック成形加工学会 第２４回年次大会","成形加工’１３",,,,"pp. 231-232",2013,May
"岩崎年晴,宝田亘,鞠谷雄士","多層オレフィンフィルムのヒートシール条件の最適化 ‐ シールバー形状と圧力の影響 ‐","プラスチック成形加工学会 第２４回年次大会","成形加工’１３",,,,"pp. 229-230",2013,May
"Yuanjing Zhang,Wataru Takarada,Takeshi Kikutani","Preparation of fiber reinforced composites utilizing structure development of bicomponent fibers in spounbonding process","日本繊維機械学会 第66回 年次大会","日本繊維機械学会 第66回 年次大会 研究発表論文集","The textile machinery society of japan",,,"pp. 158",2013,May
"阿部尭永,宝田亘,鞠谷雄士","ポリエチレンナフタレートフィルムの1軸・2軸伸長における3次元的配向挙動に及ぼす予備加熱効果","第63回 高分子学会年次大会","高分子学会予稿集",,"Vol. 63","No. 1","  CD-ROM",2013,May
"Xiaoshi Xu,Yutaka Shirakashi,Junya Ishibashi,Wataru Takarada,Takeshi Kikutani","Evaluation of surface roughness development of polyamide 6/poly(ethylene terephthalate) blend fibers through fiber diameter measurement using three types of optical equipment",,"Textile Research Journal",,"vol. 83","no. 19","pp. 2042-2050",2013,May
"Takeshi Kikutani","Analysis on Fiber Formation Behavior in the Production of Non-woven Fabrics","The International Textile Conference 2013",,,,,,2013,Apr.
"鞠谷雄士","繊維をつくる研究",,"繊維学会誌",,"Vol. 69","No. 2","pp. "P-41"",2013,Feb.
"西村浩和,清雅樹,千塚健史,増田正人,山崎斉,小島潤一,山本勝宏,岡本茂,中前勝彦,小寺賢,鞠谷雄士,櫻井伸一","PET高速溶融紡糸過程のオンライン広角Ｘ線散乱測定",,"材料",,"Vol. 62","No. 1","pp. 8-12",2013,Jan.