"J.Zhu,T.Tanaka,Y.Saito","3D Mesh Simplification for FreeForm Surfacing","Teheran International Congress on Manufacturing Engineering","Proc. Teheran International Congress on Manufacturing Engineering",,,,"pp. Code-1180",2005,Dec.
"Jiang Zhu,Tomohisa Tanaka,Yoshio Saito","3D mesh simplification for freeform surfacing","Tehran International Congress on Manufacturing Engineering (TICME2005)",,,,,"  CD Proceeding",2005,Dec.
"N.Ahmad,T.Tanaka,Y.Saito","Optimization of Cutting Parameters for End Milling Operation by SOAP Based Genetic Algorithm","6th Int. Conf. on Mech. Engr.","Proc. 6th Int. Conf. on Mech. Engr.",,,,"pp. ICME05-AM-08",2005,Dec.
"田中智久,京極啓史,中原綱光","真実接触面積に及ぼす接線力の影響","トライボロジー会議予稿集 代々木 2005-11","トライボロジー会議 2005秋 東京",,,,"pp. 289-290",2005,Nov.
"Nafis AHMAD,Tomohisa TANAKA,Yoshio SAITO","Investigation of the Constraints for Optimization of Turning Process by GA with Self-Organizing Adaptive Penalty strategy","International Conference on Leading Edge Manufacturing in 21st Century, Nagoya","Proceedings of the 3rd International Conference on Leading Edge Manufacturing in 21st Century, Nagoya",,,,"pp. 319-324",2005,Oct.
"高下法子,田中智久,齋藤義夫","弾性変形拡張方式によるホーニングツールの開発","2005年度精密工学会秋季大会 京都","2005年度精密工学会秋季大会学術講演会講演論文集",,,,"pp. 305-306",2005,Sept.
"Jiang Zhu,Tomohisa Tanaka,Yoshio Saito","A new mesh simplification algorithm for the application of surface sculpturing","The First JTU-TIT Joint Workshop on Creative Engineering-Mechanics, Control and Advanced Robotics","Proceeding of The First JTU-TIT Joint Workshop on Creative Engineering-Mechanics, Control and Advanced Robotics",,,,"  CD Proceeding",2005,Sept.
"Tomohisa TANAKA,Chikara YAMANAKA,Keiji KYOGOKU,Tsunamitsu NAKAHARA","The Effect of Interaction between Neighboring Asperity Contacts on Wear Mode Transition in Sliding Contact of Rough Surfaces","3rd World Tribology Congress","Proceedings of the 3rd World Tribology Congress",,,,"pp. WTC2005-63617",2005,Sept.
"芦塚正博,田中智久,齋藤義夫","トランケーションが及ぼす接触特性への影響","2005年度精密工学会秋季大会 京都","2005年度精密工学会秋季大会学術講演会講演論文集",,,,"pp. 247-248",2005,Sept.
"菅谷健二郎,田中智久,齋藤義夫","高分子材料へのエキシマレーザアブレーション加工に関する研究","2005年度精密工学会秋季大会 京都","2005年度精密工学会秋季大会学術講演会講演論文集",,,,"pp. 389-390",2005,Sept.
"T.Tanaka,S.Sugiyama,C.Yamanaka,S.Momozono,K.Kyogoku,T.Nakahara","Measurement of true contact area by means of elliptical polarized light reflection under slip condition","International Tribology Conference Kobe","Synopses of the International Tribology Conference Kobe",,,,"pp. G15",2005,May
"深見徹,田中智久,齋藤義夫","極座標型デスクトップマシンツールを用いた加工と計測","2005年度精密工学会春季大会 東京","2005年度精密工学会春季大会学術講演会講演論文集",,,,"pp. 697-698",2005,Mar.
"原雄太,田中智久,齋藤義夫","工作機械の消費電力評価方法の構築","2005年度精密工学会春季大会 東京","2005年度精密工学会春季大会学術講演会講演論文集",,,,"pp. 743-744",2005,Mar.
"杉恵貴史,田中智久,齋藤義夫","8軸制御曲面加工システムの構築とそのプログラミング","2005年度精密工学会春季大会 東京","2005年度精密工学会春季大会学術講演会講演論文集",,,,"pp. 939-940",2005,Mar.