"熊井真次","アルミニウム合金ダイカストの破壊特性と靭性評価",,"日本鋳造工学会第145回全国講演大会講演概要集",,,,"pp. 8-9",2004,
"小林　慶,朱　洪,熊井　真次","各種先端鋳造法により作製したAC4CH合金鋳物のミクロ組織と引裂靭性",,"日本鋳造工学会第145会全国講演大会講演概要",,,,"pp. 86",2004,
"鈴木健太,熊井真次,羽賀俊雄","高速双ロールキャストしたアルミニウム合金の急冷凝固組織と力学的特性",,"日本鋳造工学会第145回全国講演大会講演概要",,,,"pp. 51",2004,
"Hon Zhu,Shinji Kumai,toshikazu tanaak,Akikazu Sato","Tear Toughness Evaluation of a Permanent Mold Cast A356 Aluminum Alloy Using a Small-Size Specimen ",,"Materials Transactions",,"Vol. 45","No. 5","pp. 1714-1721",2004,
"Toshio Haga,Masaaki Ikawa,Shinji Kumai","High speed twin roll caster for aluminum alloy thin strips",,"Trans. Mater. Res. Soc. Jpn.",,"Vol. 29","No. 5","pp. 1823-1828",2004,
"Shinji Kumai,Kenta Suzuki,Yuichi Saito,Toshio Haga","Significance of Rapidly Solidified Aluminum Alloy Strips for High Quality Recycling",,"Trans. Mater. Res. Soc. Jpn.",,"Vol. 29","No. 5","pp. 1817-1822",2004,
"Kenta Suzuki,Shinji Kumai,Yuichi Saito,Akikazu Sato,Toshio Haga","Refined Solidification Structure and Improved Formability of A356 Aluminum Alloy Plate Produced using a High-Speed Twin-Roll Strip Caster",,"Materials Transactions",,"Vol. 45","No. 2","pp. 403-406",2004,
"S. W. Han,S. W. Kim,Shinji Kumai","Effects of solidification structure on tear resistanace of Al-7%Si-0.4%Mg cast alloys",,"Fatigue & Fracture of Engineering Materials & Structures",,"Vol. 27","No. 1","pp. 9-17",2004,
"Eiji Tada,Kazuhiko Noda,Shinji Kumai,Tooru Tsuru","Monitoring of corrosion fatigue cracking using harmonic analysis of current responses induced by cyclic stressing",,"Corrosion Science",,"Vol. 46",,"pp. 1549-1563",2004,
"Takashi Arai,K. J. Lee,Shinji Kumai,Akikazu Sato,Tomokatsu Aizawa","Microstructure and mechanical properties of the magnetic pressure seam welded SPCC/6111-T4 plates",,"Aluminum Alloys, Proc. of ICAA-9, Brisbane",,,,"pp. 862-866",2004,
"Kenta Suzuki,Shinji Kumai,Hiromasa Sato,K. J. Lee,Takeshi Ookawa,Akikazu Sato","Microstructure in friction stir welded SPCC/6022 aluminum alloy joints",,"Aluminum alloys, Proc. of ICAA-9, Brisbane",,,,"pp. 873-877",2004,
"Hon Zhu,Shinji Kumai,Akikazu Sato","Teat toughness evaluation of aluminum alloy castings using a small-size specimen",,"Aluminum alloys, Proc. of ICAA-9, Brisbane",,,,"pp. 1160-1166",2004,
"Shinji Kumai,Kenta Suzuki,yuichi saito,akikazu Sato,toshio Haga","Possibility of Rapidly solidified Thin Strips Produced by a Twin Roll Caster for New Alloy Development and High-grade Recycling of Widely-used Conventional Alloys",,"Aluminum Alloys, Proc. of ICAA-9, Brisbane",,,,"pp. 1034-1039",2004,
"乾　秀喜,羽賀　俊雄,井川　雅章,熊井　真次,渡利　久規","アルミニウム合金用異径双ロールキャスターの開発",,"軽金属学会第107回秋期講演大会概要",,,,"pp. 355-356",2004,
"井川　雅章,羽賀　俊雄,大濱　徳也,出口　要,熊井　真次,渡利　久規","アルミニウム合金用高速双ロールキャスターの開発",,"軽金属学会第107回秋期大会講演概要",,,,"pp. 353-354",2004,
"新井　貴,李　光鎮,熊井　真次,佐藤　彰一,相沢　友勝","電磁シーム接合したSPCC/6111-T4接合界面組織の透過電子顕微鏡観察",,"軽金属学会第107回秋期講演大会概要",,,,"pp. 295-296",2004,
"李　光鎮,新井　貴,熊井　真次,佐藤　彰一","透過電子顕微鏡によるSPCC/アルミニウム合金レーザ接合材の接合界面観察",,"軽金属学会第107回秋期講演大会概要",,,,"pp. 293-294",2004,
"小林　慶,朱　洪,熊井　真次,佐藤　彰一","AC4CH合金レオキャスト材およびスクイズキャスト材の引裂靭性に及ぼす熱処理の影響",,"軽金属学会第107回秋期講演大会概要",,,,"pp. 45-46",2004,
"大川　武士,李　光鎮,鈴木　健太,熊井　真次,佐藤　彰一","摩擦撹拌を利用したFe/Al異材重ね合わせ接合材のミクロ組織と力学的特性",,"軽金属学会第107回秋期大会講演概要",,,,"pp. 287-288",2004,
"二木　秀幸,小林　慶,朱　洪,熊井　真次,佐藤　彰一","摩擦撹拌接合した6N01アルミニウム合金の引裂靭性評価",,"軽金属学会第107回秋期講演大会概要",,,,"pp. 281-282",2004,
"河野　卓,鈴木　健太,小林　慶,熊井　真次,佐藤　彰一,羽賀　俊雄","高速双ロールキャストによるダイカスト用アルミニウム合金の組織微細化",,"軽金属学会第107回秋期講演大会概要",,,,"pp. 17-18",2004,
"石原　暁子,鈴木　健太,熊井　真次,佐藤　彰一,羽賀　俊雄","6022合金高速双ロールキャスト材中央部欠陥に及ぼす鋳造条件の影響",,"軽金属学会第107回秋期講演大会概要",,,,"pp. 15-16",2004,
"井川　雅章,羽賀　俊雄,大濱　徳也,出口　要,熊井　真次,渡利　久規","6111アルミニウム合金の高速双ロールキャスティング",,"軽金属学会第107回秋期講演大会概要",,,,"pp. 13-14",2004,
"羽賀　俊雄,井川　雅章,乾　秀喜,熊井　真次,渡利　久規","各種アルミニウム合金用高速双ロールキャスティング",,"軽金属学会第107回秋期講演大会概要",,,,"pp. 11-12",2004,
"李　光鎮,熊井　真次,新井　貴,佐藤　彰一","SPCC/6000系アルミニウム合金レーザ接合材の力学的性質に及ぼす熱処理の影響",,"軽金属学会第106回春期講演大会概要",,,,"pp. 311-312",2004,
"Osamu Umezawa,H.Oya,T. Yoshioka,Shinji Kumai,C. Nishimura","Development of civic model on materials technology for recycling-based society",,"Trans. Mater. Res. soc. Jpn.",,"Vol. 29","No. 5","pp. 1829-1832",2004,
"小林　慶,朱　洪,熊井　真次,佐藤　彰一","高速双ロールキャストしたダイカスト用アルミニウム合金の引裂靭性評価",,"軽金属学会第106回春期講演大会概要",,,,"pp. 235-136",2004,
"河野　卓,斎藤　祐一,熊井　真次,佐藤　彰一,羽賀　俊雄","高速双ロールキャストしたダイカスト用アルミニウム合金のミクロ組織と力学的性質",,"軽金属学会第106回春期講演大会概要",,,,"pp. 133-134",2004,
"羽賀　俊雄,井川　雅章,中井　大輔,加納　潤也,熊井　真次,鈴木　健太","高速ロールキャスティングによるFeを添加したAC4C合金板の作製",,"軽金属学会第106回春期講演大会概要",,,,"pp. 131-132",2004,
"羽賀　俊雄,宇野　生男,井川　雅章,熊井　真次,鈴木　健太","凝固距離が長い異径双ロールキャスターによるアルミニウム合金板の作製",,"軽金属学会第106回春期講演大会概要",,,,"pp. 129-130",2004,
"羽賀　俊雄,加藤　栄冶,井川　雅章,熊井　真次,鈴木　健太","異径双ロールキャスターによるアルミニウム合金板の作製",,"軽金属学会第106回春期講演大会概要",,,,"pp. 127-128",2004,
"鈴木　健太,熊井　真次,斎藤　祐一,佐藤　彰一,羽賀　俊雄","高速双ロールキャストした6022アルミニウム合金薄板の組織と力学的特性に及ぼすFeの影響",,"軽金属学会第106回春期講演大会概要",,,,"pp. 125-126",2004,
"朱　洪,小林　慶,熊井　真次,佐藤　彰一","AC4CH合金半凝固鋳造材およびスクイズ鋳造材の引裂靭性",,"軽金属学会第106回春期講演大会概要",,,,"pp. 121-122",2004,
"Shinji Kumai,Toshikazu Tanaka,Hon Zhu,Akikazu Sato","Tear Toughness of Permanent Mold Cast and DC Cast A356 Aluminum Alloys",,"Materials Transactions",,"Vol. 45","No. 5","pp. 1706-1713",2004,
"李　光鎮,熊井　真次,新井　貴,佐藤　彰一","SPCC/6000系アルミニウム合金レーザ接合材の力学的性質に及ぼす熱処理の影響",,"軽金属学会第106回春期大会講演概要",,,,"pp. 311-312",2004,
"井川　雅章,羽賀　俊雄,乾　秀喜,熊井　真次,渡利　久規","異径双ロールキャスターを用いたアルミニウム合金板の製造",,"日本鋳造工学会第145回全国講演大会講演概要",,,,"pp. 50",2004,
"井川　雅章,羽賀　俊雄,大浜　徳也,山口　要,熊井　真次","6000系合金の高速双ロールキャスティング",,"日本鋳造工学会第145回全国講演大会講演概要",,,,"pp. 49",2004,
"Shinji Muraishi,Shinji Kumai,Akikazu Sato","Competitive nucleation and growth of {111} Ω with {001} GP zones and θ' in a stress-aged Al-Cu-Mg-Ag alloy",,"Materials Transactions",,"Vol. 45","No. 10","pp. 1-7",2004,
"渡邉満洋,佐藤彰一,熊井真次","fcc金属の薄膜圧縮試験による強加工と変形組織",,"日本金属学会第135回秋期大会講演概要",,,,"pp. 294",2004,