"石原 拓也,柘植 浩志,羽賀 俊雄,熊井真次,渡利 久規","707 2層クラッド材を用いた半溶融成形",,"機械材料・材料加工技術講演会講演論文集","一般社団法人日本機械学会","Vol. 2012","No. 20","pp. "707-1"-"707-5"",2012,Nov.
"中村亮司,原田陽平,熊井真次,羽賀俊雄,藤田和子,新倉昭男","タンデム式縦型双ロールキャスト法と熱間圧延接合法で作製した4045/3003アルミニウム合金クラッド材の組織と機械的性質,軽金属学会","軽金属学会 第123回秋期大会","講演概要集","軽金属学会",,,"p. 157",2012,Nov.
"鎌倉 圭佑,羽賀 俊雄,熊井真次,渡利 久規","半凝固温度域の広いAl合金の双ロールキャスティング",,"機械材料・材料加工技術講演会 M&P","一般社団法人日本機械学会","Vol. 20",,"pp. 701-1 - 701-5",2012,Nov.
"山敷 拓也,白川 祐樹,羽賀 俊雄,熊井真次,渡利 久規","716 高速双ロールキャスターで作製したアルミニウム合金板のエッジでのバリにサイドダムプレートが及ぼす影響",,"機械材料・材料加工技術講演会講演論文集","一般社団法人日本機械学会","Vol. 2012","No. 20","pp. "716-1"-"716-4"",2012,Nov.
"山敷 拓也,羽賀 俊雄,熊井真次,渡利 久規","715 高速双ロールキャスターで作製したアルミニウム合金板にロール面が及ぼす影響",,"機械材料・材料加工技術講演会講演論文集","一般社団法人日本機械学会","Vol. 2012","No. 20","pp. "715-1"-"715-5"",2012,Nov.
"鎌倉 鎌倉,羽賀 俊雄,熊井真次,渡利 久規","714 スクレイパーを装備した単ロール法によるアルミニウム合金薄板の作製",,"機械材料・材料加工技術講演会講演論文集","一般社団法人日本機械学会","Vol. 2012","No. 20","pp. "714-1"-"714-5"",2012,Nov.
"石原 拓也,石井 啓太,柘植 浩志,羽賀 俊雄,熊井真次,渡利 久規","縦型双ロールキャスターによるアルミニウム合金クラッド材の作製",,"機械材料・材料加工技術講演会 M&P","一般社団法人日本機械学会","Vol. 20",,"pp. 713-1 -713-5",2012,Nov.
"山崎 雄允,羽賀 俊雄,熊井真次,渡利 久規","702 高速双ロール法により作製したAl合金薄板のインライン圧延",,"機械材料・材料加工技術講演会講演論文集","一般社団法人日本機械学会","Vol. 2012","No. 20","pp. "702-1"-"702-4"",2012,Nov.
"?谷謙斗,原田陽平,熊井真次,北山健二","高速固相接合した2024アルミニウム合金スタッドと6N01アルミニウム合金板の界面組織と機械的性質",,"軽金属",,"Vol. 62","No. 10","pp. 370-376",2012,Oct.
"越川翔太,下坂大輔,原田陽平,熊井真次","急冷凝固したAl-11%Si-2.5%Cu合金の曲げ特性に及ぼす共晶Si相形態の影響","日本鋳造工学会 第161回全国講演大会","講演概要集","日本鋳造工学会",,,"p. 142",2012,Oct.
"長野新介,金民錫,原田陽平,熊井真次","縦型高速双ロールキャスト法により作製したAl-7%Si合金板材の板厚中央部の組織に及ぼす鋳造条件の影響","日本鋳造工学会 第161回全国講演大会","講演概要集","日本鋳造工学会",,,"p. 99",2012,Oct.
"Li Gao,Yohei Harada,SHINJI KUMAI","Evaluation of Microstructure and Solid Fractions during Partial re-melting of A356 Aluminum Alloy by a Color Etching Method","日本金属学会2012年秋期（第151回）大会","講演概要CD","日本金属学会",,,,2012,Sept.
"熊井真次,林田 慶祐","プロジェクション形状改良による2024アルミニウム合金スタッド/5052アルミニウム合金薄板高速固相接合材の接合強度の向上",,"軽金属","軽金属学会","Vol. 62","No. 9","pp. 331-337",2012,Sept.
"Li Gao,Yohei Harada,Shinji Kumai","Analysis of Microstructure Evolution and Precise Solid Fraction Evaluation of A356 Aluminum Alloy during Partial Re-Melting by a Color Etching Method",,"Journal of Materials Science",,"Vol. 47","No. 18","pp. 6553-6564",2012,Sept.
"熊井真次,高谷 謙斗","高速固相接合した2024アルミニウム合金スタッドと5052アルミニウム合金板の組織と強度に及ぼす板厚の影響",,"軽金属","軽金属学会","Vol. 62","No. 8","pp. 293-299",2012,Aug.
"Y. Harada,Y. Sada,S. Kumai","Joining of 2024 Aluminum Alloy Stud to AZ80 Magnesium Alloy Extruded Plate by Advanced High-Speed Solid-State Method","ICAA13 (The 13th International Conference on Aluminium Alloys)","Proceedings of ICAA13 (The 13th International Conference on Aluminium Alloys)",,,,"pp. 771-776",2012,June
"L. Gao,Y. Harada,S. Kumai","Analysis of Dendritic Primary Al Grain Ripening and Solid Fraction Measurement in A356 Alloy Semi-Solid Slurry Using Segregation Sensitive Reagent","ICAA13 (The 13th International Conference on Aluminium Alloys)","Proceedings of ICAA13 (The 13th International Conference on Aluminium Alloys)",,,,"pp. 1425-1430",2012,June
"SHINJI KUMAI","ANALYSIS OF DENDRITIC PRIMARY Al GRAIN RIPENING AND SOLID FRACTION MEASUREMENT IN A356 ALLOY SEMI-SOLID SLURRY USING SEGREGATION SENSITIVE REAGENT","The 13th International Conference on Aluminum Alloys (ICAA13)","Proceedings of the 13th International Conference on Aluminum Alloys (ICAA13)","TMS (Minerals, Metals & Materials Society)",,,"pp. 1425-1430",2012,June
"SHINJI KUMAI","MICROSTRUCTURE OF 3003/4045 ALUMINUM ALLOY CLAD STRIP FABRICATED BY VERTICAL TYPE TANDEM TWIN ROLL CASTER","The 13th International Conferece on Aluminum Alloys (ICAA13)","Proceedings of the 13th International Conferece on Aluminum Alloys (ICAA13)","TMS (Minerals, Metals & Materials Society)",,,"pp. 1463-1467",2012,June
"SHINJI KUMAI","SINGLE ROLL CASTER TO CAST ALUMINUM ALLOY STRIP","The 13th International Conference of Aluminum Alloys (ICAA13)","Procedings of the 13th International Conference of Aluminum Alloys (ICAA13)","TMS (Minerals, Metals and Materials Society)",,,"pp. 157-162",2012,June
"R. Nakamura,T. Haga,Y. Harada,S. Kumai","Microstructure of 3003/4045 Aluminum Alloy Clad Strip Fabricated by Vertical Type Tandem Twin Roll Caster","ICAA13 (The 13th International Conference on Aluminium Alloys)","Proceedings of ICAA13 (The 13th International Conference on Aluminium Alloys)",,,,"pp. 1463-1467",2012,June
"SHINJI KUMAI","EFFECTS OF PLATE THICKNESS AND PROJECTION SHAPE ON THE MICROSTRUCTURE AND STRENGTH OF HIGH-SPEED SOLID-STATE JOINED 2024 ALLOY STUDS AND 5052 ALLOY PLATES","The 13th International Conference on Aluminum Alloys (ICAA13)","Proceddings of the 13th International Conference on Aluminum Alloys (ICAA13)","TMS (The Minarals, Metals & Materials Society)",,,"pp. 755-760",2012,June
"SHINJI KUMAI","JOINING OF 2024 ALUMINUM ALLOY STUD TO AX80 MAGNESIUM ALLOY EXTRUDED PLATE BY ADVANCED HIGH-SPEED SOLID-STATE METHOD","The 13th International Conference on Aluminum Alloys","Proccedings of the 13th International Conference on Aluminum Alloys","TMS (The Minerals, Metals & Materials Society)",,,"pp. 771-776",2012,June
"SHINJI KUMAI","Experimental and Numerical Analysis of Formation Manner of Characteristic Wavy Morphology in Impact Welded Simila- and Dissimilar-Metal Plates","The 13th International Conference on Aluminum alloys (ICAA13)","Proceedings of the 13th International Conference on Aluminum alloys (ICAA13)","TMS (Minerals, Metals & Materials Society)",,,"pp. 789-794",2012,June
"SHINJI KUMAI","Microstructural Characterization of Intermediate Layer Produced at aluminum/Metallic Glass Interface Fabricated by Magnetic Pulse Welding",,"Materials Transactions",,"Vol. 53","No. 5","pp. 951-958",2012,May
"熊井真次","縦型双ロールキャスターによるクラッド材の作製","軽金属学会第122回春期講演","軽金属学会第122回春期講演大会",,,,"pp. 237-238",2012,May
"熊井真次","タンデム式縦型双ロールキャスターで作製した3003/4045アルミニウム合金クラッド材の接合界面組織","軽金属学会第122回春期講演大会","軽金属学会第122回春期講演大会概要",,,,"pp. 233-234",2012,May
"熊井真次","高速固相接合した2024アルミニウム合金スタッドとAZ80マグネシウム合金板の接合強度と界面組織","金属学会第122回春期大会","軽金属学会第122回春期大会講演概要",,,,"pp. 181-182",2012,May
"熊井真次","6022アルミニウム合金板の摩擦攪拌スポット接合界面の組織と機械的性質に及ぼすプローブ底面形状の影響","軽金属学会第122回春期大会","軽金属学会第122回春期大会講演概要",,,,"pp. 173-174",2012,May
"熊井真次","高速ロールキャスティングにおけるサイドダムプレートの位置がバリの発生に与える影響","日本鋳造工学会第160回全国講演大会","日本鋳造工学会第160回全国講演大会講演概要集",,,,"p. 61",2012,May
"熊井真次","スクレイバーを用いた改良型単ロール法によるアルミニウム合金板の作製","日本鋳造工学会第160回全国講演大","日本鋳造工学会第160回全国講演大会講演概要集",,,,"p. 60",2012,May
"SHINJI KUMAI","Analysis of microstructure evolution and precise solid fraction evaluation of A356 aluminum alloy during partial re-melting by a color etching method",,"Jornal of Materials Science","Springer",,,,2012,May
"中村亮司,田中裕一,羽賀俊雄,原田陽平,熊井真次","タンデム式縦型双ロールキャスターで作製した3003/4045アルミニウム合金クラッド材の接合界面組織","軽金属学会 第122回春期大会","講演概要集",,,,"p. 233",2012,May
"佐田雄太郎,原田陽平,熊井真次","高速固相接合した2024アルミニウム合金スタッドとAZ80マグネシウム合金板の接合強度と界面組織","軽金属学会 第122回春期大会","講演概要集",,,,"p. 181",2012,May
"熊井真次","スクレイパを用いた単ロール法によるアルミニウム合金板の作製",,"軽金属",,"Vol. 62","No. 4","pp. 146-152",2012,Apr.
"Haga, T.,Komeda, K.,Mtsuoka, K.,SHINJI KUMAI,Watari, H.","Effect of Si on AA5182 strip cast by a high speed twin roll caster",,"Applied Mechanics and Materials",,"Vol. 184-185",,"pp. 834-837",2012,
"山敷 拓也,藤野 暢人,羽賀 俊雄,熊井真次,渡利 久規","高速双ロールキャスティングにおけるサイドダムプレートの位置がアルミニウム合金薄板エッジでのバリの発生に与える影響",,"鋳造工学 全国講演大会講演概要集","公益社団法人 日本鋳造工学会","Vol. 160",,"pp. 61-61",2012,
"鎌倉 圭佑,羽賀 俊雄,熊井真次,渡利 久規","半凝固温度範囲が広域なAl合金の双ロールキャスティング",,"鋳造工学 全国講演大会講演概要集","公益社団法人 日本鋳造工学会","Vol. 161",,"pp. 100-100",2012,
"SHINJI KUMAI","Strip casting of Al-25%Si alloy",,"Advanced Materials Research",,"Vol. 430-432",,"pp. 669-672",2012,
"SHINJI KUMAI","Roll casting of aluminum alloy strip by a single roll caster equipped with a scraper",,"Advanced Materials Research",,"Vol. 445",,"pp. 307-312",2012,
"Haga, Toshio,Tsuge, Hiroshi,Ishihar, Takuya,SHINJI KUMAI,Watari, Hisaki","ROLL CASTER TO CAST CLAD STRIPS","13th International Conference on Aluminum Alloys (ICAA)","PROCEEDINGS OF THE 13TH INTERNATIONAL CONFERENCE ON ALUMINUM ALLOYS (ICAA13)","JOHN WILEY & SONS",,,"pp. 163-168",2012,
"SHINJI KUMAI","Roll casting of recycled AA5182",,"Applied Mechanics and Materials",,"Vol. 121-126",,"pp. 4667-4670",2012,
"SHINJI KUMAI","A single roll caster for aluminum alloy strip",,"Advanced Materials Research",,"Vol. 382",,"pp. 368-371",2012,
"SHINJI KUMAI","Roll casting of clad strip",,"Materials Science forum",,"Vol. 706-709",,"pp. 1152-1157",2012,
"Haga, T.,SHINJI KUMAI,Watari, H.","Strip casting of recycled aluminum alloys by a twin roll caster",,"Waste and Biomass Valorization",,"Vol. 3","No. 4","pp. 419-424",2012,
"Yamashiki, T.,Haga, T.,SHINJI KUMAI,Watari, H.","Investigation of the influence of the roll surface on the cast strip at the casting using a vertical type high speed twin roll caster",,"Applied Mechanics and Materials",,"Vol. 184-185",,"pp. 271-276",2012,
"Haga, T.,Akitsu, K.,Kamakura, K.,SHINJI KUMAI,Watari, H.","Single roll caster equipped with a scraper",,"Key Engineering Materials",,"Vol. 504-506",,"pp. 1243-1248",2012,