"筒井あかり,中村亮司,原田陽平,熊井真次,羽賀俊雄,寺山和子,新倉昭男","異なるプロセスにより製造した4045/3003アルミニウム合金クラッド材のミクロ組織と引張特性","（一社）軽金属学会 第125回秋期大会","軽金属学会第125回秋期大会講演概要","一般社団法人軽金属学会","Vol. 125",,"pp. 239-240",2013,Nov.
"Y. Harada,K. Ishizuka,S. Kumai","Advanced stud welding of 2024 aluminum alloy studs to SPCC plates","IJST2013 (International Symposium on Interfacial Joining and Surface Technology---Solid State Joining, Brazing and Soldering, Surface Treatment, Advanced Packaging)","Proceedings of IJST2013","Japan Welding Society",,,"pp. 111-112",2013,Nov.
"J. Nishiwaki,Y. Sawa,Y. Harada,S. Kumai","SPH analysis of wavy interface formation mechanism in magnetic pulse welded dissimilar metal joints","IJST2013 (International Symposium on Interfacial Joining and Surface Technology---Solid State Joining, Brazing and Soldering, Surface Treatment, Advanced Packaging)","Proceedings of IJST2013","Japan Welding Society",,,"pp. 63-64",2013,Nov.
"SHINJI KUMAI","Solidification Structure and Casting Defects in High-Speed Twin-Roll Cast Al-2 mass%Si Alloy Strip",,"Materials Transactions",,"Vol. 54","No. 10","pp. 1930-1937",2013,Oct.
"L. Gao,Y. Harada,S. Kumai","Microstructural Characterization of Partially Re-melted A356 Aluminum Alloy by a Color Etching Method","ACAA-2013(The 1st Asian Conference on Aluminum Alloys)","Final Program of ACAA-2013",,,,"p. 40",2013,Oct.
"SHINJI KUMAI","Development of Recycling-oriented Aluminum Alloys and Fabrication of In-situ Clad Strips by High Speed Twin Roll Casting","The 1st Asian Conference on aluminum Alloys (ACAA-2013)","Final Program of ACAA-2013",,,,"p. 34",2013,Oct.
"佐田雄太郎,原田陽平,熊井真次","高速固相接合したSS400スタッドとSPCCの接合組織","（公社）日本金属学会2013年秋期講演大会（第153回）","講演概要CD",,,,"p. 59",2013,Sept.
"西脇淳人,原田陽平,熊井真次","SPH法を用いた衝撃圧接におけるメタルジェットの放出挙動と波状界面形成の数値解析","（公社）日本金属学会2013年秋期講演大会（第153回）","講演概要CD",,,,"p. 60",2013,Sept.
"熊井真次","高速固相接合したSS400スタッドとSPCCの接合組織","日本金属学会2013年秋期講演大会","日本金属学会2013年秋期講演大会講演概要集",,,,,2013,Sept.
"S. Kumai,M-S. Kim,D. Shimosaka,Y. Harada","Fundamentals and Applications of Aluminum Alloy Strips Produced by Vertical-Type High-Speed Twin-Roll Caster","PRICM8 (The 8th Pacific Rim International Congress on Advanced Materials and Processing)","Final program of PRICM8",,,,"p. 24",2013,Aug.
"SHINJI KUMAI","Influence of probe bottom shape on microstructure and mechanical properties in friction stir spot welded 6022 aluminum alloy sheets",,"Journal of Light Metal Welding",,"Vol. 51","No. 8","pp. 309-318",2013,Aug.
"Yohei Harada,Shinji Kumai","Effect of ceramics coating using sol-gel processing on corrosion resistance and age hardening of AZ80 magnesium alloy substrate",,"Surface & Coatings Technology",,"Vol. 228",,"pp. 59-67",2013,Aug.
"Y. Harada,Y. Sada,S. Kumai","Joint Strength and Interfacial Microstructure of 2024 Aluminum Alloy Studs and AZ80 Magnesium Alloy Plates Joined by Advanced Stud Welding Method","PRICM8 (The 8th Pacific Rim International Congress on Advanced Materials and Processing)","Program",,,,"p. 46",2013,Aug.
"下坂大輔,越川翔太,原田陽平,熊井真次","急冷凝固したAl-11%Si-2.5%Cu合金板の曲げ性に及ぼす共晶Si相形態の影響",,"鋳造工学","（公社）日本鋳造工学会","Vol. 85","No. 7","pp. 407-413",2013,July
"下坂大輔,原田陽平,熊井真次","急冷凝固したAl-11%Si-2.5%Cu合金の共晶Si相形態の変化と機械的性質への影響",,"鋳造工学","（公社）日本鋳造工学会","Vol. 85","No. 6","pp. 335-342",2013,June
"筒井あかり,中村亮司,原田陽平,熊井真次,寺山和子,新倉昭男","タンデム式縦型高速双ロールキャスト法と熱間圧延接合法で作製した4045/3003アルミニウム合金クラッド材の組織と引張特性に及ぼす熱処理の影響","（一社）軽金属学会第124回春期大会","軽金属学会第124回春期大会講演概要","（一社）軽金属学会",,,"pp. 389-390",2013,May
"熊井真次","縦型高速双ロールキャストしたAl-2mass%Si合金板材の鋳造欠陥の制御","日本鋳造工学会第162回全国講演大会","日本鋳造工学会第162回全国講演大会講演概要集",,,,"p. 77",2013,May
"Li Gao,Yohei Harada,SHINJI KUMAI","Micro-segregations in semi-solid microstructure of both Ti-contained and Ti-less A356 aluminum alloys characterized by a color etching method","（公社）日本鋳造工学会 第162回全国講演大会","日本鋳造工学会第162回全国講演大会講演概要集","（公社）日本鋳造工学会",,,"p. 64",2013,May
"原田陽平,長野新介,熊井真次","リサイクル材の用途拡大に向けたFe添加A356アルミニウム合金の縦型高速双ロールキャスティング","（公社）日本鋳造工学会 第162回全国講演大会","日本鋳造工学会第162回全国講演大会講演概要集","（公社）日本鋳造工学会",,,"p. 76",2013,May
"西脇淳人,澤裕也,原田陽平,熊井真次","異種金属の衝撃圧接時の衝突挙動と界面形態に及ぼす金属の密度差の影響","（公社）日本金属学会2013年春期講演大会（第152回）","講演概要CD","（公社）日本金属学会",,,,2013,Mar.
"熊井真次","明日のものづくり技術を支える材料系学生の育成 ?東京工業大学 熊井研究室?",,"素形材","素形材センター","Vol. 54","No. 3","pp. 61-64",2013,Mar.
"Li Gao,Yohei Harada,SHINJI KUMAI","Solutes distributions in both dendritic and spheroidal aluminum grains characterized by a color etching method","（公社）日本金属学会2013年春期講演大会（第152回）","講演概要CD","（公社）日本金属学会",,,,2013,Mar.
"佐田雄太郎,原田陽平,熊井真次","SS400スタッドとSPCCの高速固相接合","（公社）日本金属学会2013年春期講演大会（第152回）","講演概要CD","（公社）日本金属学会",,,,2013,Mar.
"熊井真次","贈る言葉",,"鋳造工学 = Journal of Japan Foundry Engineering Society","公益社団法人 日本鋳造工学会","Vol. 85","No. 2","pp. 132-133",2013,Feb.
"山敷 拓也,羽賀 俊雄,熊井真次,渡利 久規","高速双ロールキャスターで作製したアルミニウム合金板にロール面が及ぼす影響",,"日本機械学会論文集 A編","The Japan Society of Mechanical Engineers","Vol. 79","No. 804","pp. 1156-1160",2013,
"山敷 拓也,白川 祐樹,羽賀 俊雄,熊井真次,渡利 久規","高速双ロールキャスターで作製したアルミニウム合金板のエッジでのバリにサイドダムプレートが及ぼす影響",,"日本機械学会論文集 A編","The Japan Society of Mechanical Engineers","Vol. 79","No. 804","pp. 1152-1155",2013,
"Haga, T.,Tsuge, H.,SHINJI KUMAI,Watari, H.","A roll caster to cast clad strip",,"Key Engineering Materials",,"Vol. 554-557",,"pp. 1902-1909",2013,
"Haga, T.,Nakamura, R.,SHINJI KUMAI,Watari, H.","A vertical type twin roll caster for an aluminium alloy clad strip",,"Archives of Materials Science and Engineering",,"Vol. 62","No. 1","pp. 36-44",2013,