"神戸貴史,村石信二,熊井真次","電磁圧接ならびに電磁成形したアルミニウム板の組織と変形挙動の数値解析","軽金属学会第135回秋期大会","軽金属学会第135回秋期大会講演概要集",,,,"pp. 79 - 80",2018,Nov.
"佐野悠太,原田陽平,村石信二,熊井真次","A7050アルミニウム合金の時効処理に伴う析出組織と硬さ変化に及ぼす二段時効の効果","（一社）軽金属学会 第135回秋期大会","講演概要集",,,,"pp. 433-434",2018,Nov.
"Nguyenha,Ram Song,Kazuho Otsuka,Yohei Harada,Shinji Muraishi,SHINJI KUMAI","Mechanical properties of high manganese-containing 3xxx aluminum alloy sheets fabricated from high-speed twin-roll cast strips","（一社）軽金属学会 第135回秋期大会","講演概要集",,,,"pp. 497-498",2018,Nov.
"熊井真次","種々の手法を用いて作製した異種金属接合材の接合界面形態と熱履歴","軽金属学会第135回秋期大会","軽金属学会第135回秋期大会講演概要集",,,,"pp. 70 - 71",2018,Nov.
"Tomoo Goda,Shinji Kumai","Microstructure and Elongation Anisotropy of Cold Rolled and solution Treated A356 Alloy Strips Fabricated via High-Speed Twin-Roll Casting",,"Materials Transactions",,"Vol. 59","No. 11","pp. 1777 to 1783",2018,Nov.
"沖原麻耶,村石信二,熊井真次","調質の異なるアルミニウム板を用いた電磁圧接材の接合界面","軽金属学会第135回秋期大会","軽金属学会第135回秋期大会講演概要集",,,,"pp. 81 - 82",2018,Nov.
"篠原宏季,合田知男,原田陽平,熊井真次","縦型高速双ロールキャスト法により作製したAl-7%Si合金薄板の組織と破断伸び異方性の低減","（公社）日本鋳造工学会 第172回全国講演大会","講演概要集",,,,"p. 64",2018,Oct.
"丸山貴之,原田陽平,熊井真次","タンデム式縦型高速双ロールキャスト法を用いた7072/3003/4045アルミニウム合金クラッド材の作製","（公社）日本鋳造工学会 第172回全国講演大会","講演概要集",,,,"p. 66",2018,Oct.
"市川智祥,原田陽平,熊井真次","タンデム式縦型高速双ロールキャスト法により作製したAl-Mn/Al-Si系合金クラッド材の皮材組織形成過程","（公社）日本鋳造工学会 第172回全国講演大会","講演概要集",,,,"p. 65",2018,Oct.
"Shinji Kumai,Yusuke Takayama","DEVEROPMENT OF IN SITU FABRICATION PROCESS OF CLAD MATERIALS BY USING TANDEM TWIN-ROLL CASTING","The 73rd World Foundry Congress","Congress Proceedings of the 73rd World Foundry Congress",,,,"pp. 105 - 106",2018,Sept.
"Ram Song,Shinji Muraishi,Shinji Kumai","EFFECT OF COOLING RATE ON CONSTITUENT PARTICLE FORMATION IN HIGH-SPEED TWIN-ROLL CAST Al-Mn BASED ALLOY STRIPS","The 73rd World Foundry Congress","Congress Proceedings of the 73rd World Foundry Congress",,,,"pp. 35 - 36",2018,Sept.
"Mitsuhiro Watanabe,Shinji Kumai","Dissimilar Metal Joining of Aluminum and Copper Plates Using Magnetic Pulse Welding and Their Joint Strength","The 4th World Congress on Mechanical, Chemical, and Material Engineering (MCM'18)","Proceedings of the 4th World Congress on Mechanical, Chemical, and Material Engineering (MCM'18)",,,,"pp. MMME 118-1 to MMME118-5",2018,Aug.
"河村宥成,佐野 悠介,上田 結香子,渡邉満洋,熊井真次","電磁圧接したAl/鋼及びAl/Alめっき鋼板接合材の界面組織","2018年度軽金属溶接協会年次講演大会",,,,,,2018,June
"Ram Song,Kazuho Otsuka,Yohei Harada,Shinji Kumai","Influence of Cooling Rates on Microstructure and Mn Supersaturation in High-Speed Twin-Roll Cast Al-Mn Based Alloy Strips","The 16th International Conference on Aluminum Alloys","Proceedings of 2018ICAA16",,,,,2018,June
"Takashi Kambe,Yasutaka Kedo,Shinji Muraishi,Shinji Kumai","Numerical Analysis of Magnetic Pulse Forming and Deformation Structure of Pure Al and Cu Sheets","The 16th International Conference on Aluminium Alloys (ICAA16)","Proceedings of 2018ICAA16",,,,,2018,June
"李杰迪,神戸貴史,山岸大起,村石信二,熊井真次","数値解析を用いたAl/Fe電磁圧接界面に生成する中間層の再現","2018年度 軽金属溶接協会 年次講演大会",,,,,,2018,June
"Shinji Kumai,Junto Nishiwaki","Formation Mechanism and Control of Impact Welded Interface in Dissimilar Metal Joints","The 16th International Conference on Aluminum Alloys (ICAA16)","Proceedings of 2018ICAA16",,,,,2018,June
"大塚一帆,原田陽平,村石信二,熊井真次","縦型高速双ロールキャスト材より作製したAl-1?4mass%Mn合金板の機械的特性","（一社）軽金属学会 第134回春期大会","講演概要集",,,,"pp. 307-308",2018,May
"Nan Jiang,原田陽平,熊井真次","縦型高速双ロールキャストしたAl-Mg合金板材の凝固組織と表面性状","（公社）日本鋳造工学会 第171回全国講演大会","講演概要集",,,,"p. 105",2018,May
"原田陽平,Nan Jiang,熊井真次","縦型高速双ロールキャスト法による高Mg含有高強度Al-Mg系合金薄板の作製","（公社）日本鋳造工学会 第171回全国講演大会","講演概要集",,,,"p. 106",2018,May
"Mitsuhiro Watanabe,Kentaro Ishiuchi,Shinji Kumai","Interfacial Microstructure and Hardness of Magnetic Pulse Welded Copper/Nickel Lap Joint",,"Materials Transactions",,"Vol. 59","No. 3","pp. 425 to 431",2018,Mar.
"熊井真次","異種金属の衝撃圧接",,"溶接学会誌",,"Vol. 87","No. 1","pp. 48 - 56",2018,Jan.
"R. Song,Y. Harada,S. Kumai","Influence of cooling rate on primary particle and solute distribution in high-speed twin-roll cast Al-Mn based alloy strip",,"Materials Transactions",,"Vol. 59","No. 1","pp. 110-116",2018,Jan.