"吉岡勇人,平林武洋,新野秀憲","ナノ加工用超精密スピンドルシステムの開発","第１２回国際工作機械技術者会議","第１２回国際工作機械技術者会議「工作機械関連のニューテクノロジー」ポスター展","日本工作機械工業会",,,"pp. 52-53",2006,Nov.
"有馬洋,吉岡勇人,新野秀憲","ベルト駆動X-Y精密位置決めテーブルシステム","日本機械学会第６回生産加工・工作機械部門講演会","日本機械学会第６回生産加工・工作機械部門講演会講演論文集",,"Vol. 06","No. 34","pp. 153-154",2006,Nov.
"後閑利通,吉岡勇人,新野秀憲","リニアモータ駆動超音波浮上テーブルシステムの開発","日本機械学会第６回生産加工・工作機械部門講演会","日本機械学会第６回生産加工・工作機械部門講演会講演論文集",,"Vol. 06","No. 34","pp. 151-152",2006,Nov.
"吉岡勇人,小野幸村,新野秀憲","ナノ加工用XY位置決めテーブルシステム","第１２回国際工作機械技術者会議","第１２回国際工作機械技術者会議「工作機械関連のニューテクノロジ」ポスター展",,,,"pp. 54-55",2006,Nov.
"Hidenori SHINNO,Hayato YOSHIOKA,Sihar MARPAUNG","A Structured Method for Analysing Product Specification in Product Planning for Machine Tools",,"Journal of Engineering Design",,"Vol. 17","No. 4","pp. 347-356",2006,Aug.
"吉岡勇人,新野秀憲","ナノメートル平面運動テーブルの開発とその性能評価",,"日本機械学会RC216多軸制御工作機械とその利用技術に関する研究分科会研究報告書",,,,"pp. 71-74",2006,Aug.
"Hidenori SHINNO,Hayato YOSHIOKA,Sihar Marpaung,Soichi HACHIGA","Quantitative SWOT Analysis on Global Competitiveness of Machine Tool Industry",,"Journal of Engineering Design",,"Vol. 17","No. 3","pp. 251-258",2006,June
"Hayato YOSHIOKA,Simpei MATSUMURA,Hitoshi HASHIZUME,Hidenori SHINNO","Minimizing Thermal Deformation of Aerostatic Spindle System by Temperature Control of Supply Air",,"JSME International Journal, Series C",,"Vol. 49","No. 2","pp. 606-611",2006,June
"H.Yoshioka,K.Taniguchi,H.Shinno","A Novel Linear Motor Driven Aerostatic Planar Positioning Table System for Nano-Machining","The 6th International conference european society for precision engineering and nanotechnology(euspen)","Proceedings of the 6th International conference european society for precision engineering and nanotechnology",,"Vol. 1",,"pp. 305-308",2006,May
"吉岡勇人,新野秀憲","超音波振動を用いた非接触ナノ位置決めテーブルシステム",,"超音波TECHNO",,"Vol. 18","No. 3","pp. 48-51",2006,May