"Haruo HOUJOH,Takeshi IINO,Shigeki MATSUMURA","Experimental Investigation of the Possibility of a Self-Vacuuming Gearbox for Reducing Windage Loss","ASME 2015 International Design Engineering Technical Conferences & Computers and Information in Engineering Conference, IDETC/CIE 2015","Proceedings of the ASME 2015 International Design Engineering Technical Conferences & Computers and Information in Engineering Conference",,,,,2015,Aug.
"松村茂樹,北條春夫","多段歯車装置におけるかみあい非整数次振動の多段歯車装置におけるかみあい非整数次振動の長周期振幅変動分析による不良原因歯車特定方法",,"日本機械学会論文集",,"Vol. 81","No. 826",,2015,June
"松村 茂樹,安孫子直樹,小板橋亮,飯野 剛,北條春夫","風損低減を目的とした歯車の自己ポンプ作用の実験的評価 （箱内の減圧量，損失および発熱について）",,"日本機械学会論文集","一般社団法人 日本機械学会","Vol. 81","No. 825",,2015,May
"Shigeki Matsumura*,Haruo Houjoh*","Experimental Investigation of Vibration Behavior of a Planetary Gear System","6th International Conference on Manufacturing, Machine Design and Tribology","Proceedings of the 6th International Conference on Manufacturing, Machine Design and Tribology","The Japan Society of Mechanical Engineers",,,"pp. 192-193",2015,Apr.
"Haruo Houjoh*,Naoki Abiko**,Ryo Koitabashi***,Takeshi Iino*,Shigeki Matsumura*","Experimental Investigation of Vacuuming a Gear Box by the Interior Gear Pair for Decreasing Windage Loss","6th International Conference on Manufacturing, Machine Design and Tribology","Proceedings of the 6th International Conference on Manufacturing, Machine Design and Tribology","The Japan Society of Mechanical Engineers",,,"pp. 198-199",2015,Apr.
"飯野剛,渡辺裕文,松村茂樹,北條春夫","熱線流速計を用いた音響計測における風速の影響の検討","日本音響学会2015春季研究発表会","日本音響学会2015春季研究発表会講演論文集",,,,"pp. 953-954",2015,Mar.
"飯野剛,渡辺裕文,松村茂樹,北條春夫","熱線流速計を用いた音響計測の検討",,"日本音響学会2014秋季研究発表会講演論文集",,,,"pp. 767-768",2014,Sept.
"安孫子直樹,小板橋亮,飯野剛,松村茂樹,北條春夫","歯車の自己ホ?ンフ?作用による歯車箱内減圧時の損失およひ?発熱の実験的評価","2014年度年次大会","2014年度年次大会講演論文集","一般社団法人日本機械学会",,"No. 14-1","  S1160203(DVD-ROM)",2014,Sept.
"Haruo HOUJOH,Shigeki MATSUMURA,Shun-ichi OHSHIMA","A discussion on feeding cooler lubricant to the mesh exit region of a helical gear pair based on flow visualization experiments","International Gear Conference 2014","International Gear Conference 2014",,,,"pp. 731-740",2014,Aug.
"Shigeki MATSUMURA,Takeshi Iino,Haruo HOUJOH","Experimental Investigation of Vibratrion Behavior of a Planetary Gear System","The 5th BIT-TIT Joint Workshop on Mechanical Engineering","The Proceedings of the 3rd BIT-TIT Joint Workshop on Mechanical Engineering",,,,"pp. 10-15",2014,Aug.
"北條春夫,小板橋亮,安孫子直樹,飯野剛,松村茂樹","風損低減を目的とした歯車箱内の自己ポンプ作用による減圧における損失の実験的評価","第14回機素潤滑設計部門講演会","第14回機素潤滑設計部門講演会論文集","一般社団法人日本機械学会",,"No. 14-6","pp. 155-156",2014,Apr.
"松村茂樹,若崎知己,飯野剛,北條春夫","フ?ラネタリ型遊星歯車装置の振動挙動の実験的把握に関する研究","第14回機素潤滑設計部門講演会","第14回機素潤滑設計部門講演会講演論文集","一般社団法人日本機械学会",,"No. 14-6","pp. 159-160",2014,Apr.
"清水豪,飯野剛,松村茂樹,北條春夫","計測・表示一体型音響インテンシティ計測システム","日本音響学会2014年春季研究発表会",,,,,"pp. 703-704",2014,Mar.
"Isamu Tsuji,Kazumasa Kawasaki,Hiroshi Gunbara,Haruo Houjoh,Shigeki Matsumura","Tooth Contact Analysis and Manufacture on Multi-Tasking Machine of Large-Sized Straight Bevel Gears with Equi-Depth Teeth",,"Journal of Mechanical Design",,"Vol. 135",,,2014,Mar.
"Haruo Houjoh,Shigeki Matsumura,Kai Feng","An experimental assessment of lowering ambient pressure of a pair of helical gears with their self pumping action for reducing windage loss","International conference on Gears 2013","VDI berichte",,,"  2199","pp. 597-608",2013,Oct.
"Jing Ya Liu,Shigeki Matsumura,Bing Kui chen,Haruo HOUJOH","Investigation on Modulation Sidebands in a K-H-V Planetary Gear with Double-Enveloping Cycloid Drive Vibration",,"Applied Mechanics and Materials",,"Volume 86",,"pp. 313-318",2013,Aug.
"松村茂樹,北條春夫","振動計測とシミュレーションによる歯車のかみあい起振力の推定に関する研究","第12回機素潤滑設計部門講演会","第12回機素潤滑設計部門講演会講演論文集","一般社団法人 日本機械学会",,"No. 12-14","pp. 57-58",2012,Apr.
"馮凱,金子祥平,松村茂樹,北條春夫","自己ポンプ作用を利用した歯車装置の風損低減：減圧効果の把握","第12回機素潤滑設計部門講演会",,,,,,2012,Apr.
"Jingya LIU,Bingkui CHEN,Shigeki MATSUMURA,Chaoyang LI,Haruo HOUJOH","Design of a Novel Cycloid Drive with a Cycloid-arc Gear and Analysis of Its Meshing Characteristic",,"Journal of Advanced Mechanical Design, Systems, and Manufacturing",,"Vol. 6","No. 2","pp. 310-322",2012,Mar.
"Jingya LIU,Shigeki MATSUMURA,Bingkui CHEN,Haruo HOUJOH","Torsional Stiffness Calculation of Double-Enveloping Cycloid Drive",,"Journal of Advanced Mechanical Design, Systems, and Manufacturing","The Japan Society of Mechanical Engineers","Vol. 6","No. 1","pp. 2-14",2012,Jan.
"Chanat RATANASUMAWONG,Puwadon ASAWAPICHAYACHOT,Surin PHONGSUPASAMIT,Haruo HOUJOH,Shigeki MATSUMURA","Estimation of Sliding Loss in a Parallel-Axis Gear Pair",,"Journal of Advanced Mechanical Design, Systems, and Manufacturing","The Japan Society of Mechanical Engineers","Vol. 6","No. 1","pp. 88-103",2012,Jan.
"FENG, K.,MATSUMURA, S.,HOUJOH, H.","Dynamic behavior of helical gears with effects of shaft and bearing flexibilities","The International Conference on Power Transmission 2011","Applied Mechanics and Materials","Trans Tech Publications","Vol. 86",,"pp. 26-29",2011,Oct.
"松村茂樹,北條春夫","振動計測とシミュレーションの組み合せによる歯車かみあい起振力の推定に関する研究（薄肉リブ付歯車箱における検証）","日本機械学会2011年度年次大会","日本機械学会2011年度年次大会講演論文集","一般社団法人 日本機械学会",,"No. 11-1",,2011,Sept.
"Shigeki MATSUMURA,Toshiya Nagumo,Haruo HOUJOH","Estimation Method of Mesh Excitation Waveform of a Gear System (Hybrid Estimation With Vibration Measurement and Simulation)","11th ASME International Power Transmission and Gearing Conference","Proceedings of the ASME 2011 International Design Engineering Technical Conferences & Computers and Information in Engineering Conference","ASME",,,"pp. 48130",2011,Aug.
"Shigeki MATSUMURA,Toshiya NAGUMO,Haruo HOUJOH","Estimation Method of Mesh Excitation Waveform of a Running Gear Pair  (Fitting Method of Vibration Analysis and Measured Results)","The 4th International Conference on Manufacturing, Machine Design and Tribology","Proceedings of The 4th International Conference on Manufacturing, Machine Design and Tribology",,,,"p. 175-176",2011,Apr.
"Chanat Ratanasumawong,Puwadon Asawapichayachot,Haruo Houjoh,Shigeki Matsumura","Estimation of Sliding Loss in a Parallel-Axis Gear Pair","The 4th International Conference on Manufacturing","Proceedings of The 4th International Conference on Manufacturing",,,,"p. 11-12",2011,Apr.
"Jingya Liu,Shigeki Matsumura,Bingkui Chen,Haruo Houjoh","Torsional Stiffness Calculation of Double-Enveloping Cycloid Drive","The 4th International Conference on Manufacturing, Machine Design and Tribology","Proceedings of the 4th International Conference on Manufacturing, Machine Design and Tribology","Tha Japan Society of Mechanical Engineers",,,"pp. 177-178",2011,Apr.
"南雲稔也,松村茂樹,Chanat RATANASUMAWONG,北條春夫","歯車のかみあい振動における側帯波の発生機構とその振幅非対称性に関する力学的検討",,"日本機械学会論文集Ｃ編","日本機械学会","Vol. 77","No. 775","pp. 617-623",2011,Mar.
"松村茂樹,北條春夫,吉田誠","周波数調整時の組立誤差を排除した遠心振子式動吸振器の歯車装置への適用","第16回日本IFToMM会議シンポジウム","第16回日本IFToMM会議シンポジウム前刷集","日本IFToMM会議事務局",,,"pp. 13-16",2010,Nov.
"Edzrol Niza MOHAMAD,Masaharu KOMORI,Shigeki MATSUMURA,Chanat RATANASUMAWONG,Masanori YAMASHITA,Takushi nomura,Haruo HOUJOH,Aizoh KUBO","Effect of Variations in Tooth flank Form Among Teeth on Gear Vibration and Sensory Evaluation Method Using Potential Gear Noise",,"Jour. Advanced Mechanical Design, Systems, and Manufacturing","JSME","Vol. 4","No. 6","pp. 1166-1181",2010,Oct.
"Shigeki Matsumura,Haruo Houjoh,Toshiya Nagumo,Chanat Ratanasumawong","Estimation Method of Mesh Excitation Waveform of a Running Gear Pair (Hybrid Estimation with Vibration Measurement and Simulation)","International Conference on Gears","Proceedings of International Conference on Gears","VDI verlag",,"  Nr.2108","pp. 1427-1430",2010,Oct.
"松村茂樹,北條春夫,南雲稔也","振動計測とシミュレーションの組み合せによる歯車かみあい起振力の推定に関する研究","日本機械学会2010年度年次大会","日本機械学会2010年度年次大会講演論文集","(社)日本機械学会",,"No. 10-1","pp. 119-120",2010,Sept.
"松村茂樹,北條春夫,吉田誠","周波数調整時の組立誤差を排除した遠心振子式動吸振器の歯車装置への適用","日本機械学会 第１０回機素潤滑設計部門講演会","日本機械学会 第１０回機素潤滑設計部門講演会講演論文集","(社)日本機械学会",,"No. 10-10","pp. 91-92",2010,Apr.
"大嶋俊一,縄田 優,松村 茂樹,北條 春夫","歯車箱内の風損低減を目的とした歯車のポンプ作用による減圧効果の実験的確認","日本機械学会第10回機素潤滑設計部門講演会","日本機械学会第10回機素潤滑設計部門講演会講演論文集",,,"No. 10-10","pp. 121-122",2010,Apr.
"RATANASUMAWONG Chanat,MATSUMURA Shigeki,TATSUNO Tetsuo,HOUJOH Haruo","Estimating Gear Tooth Surface Geometry by Means of the Vibration Measurement: Distinction of the Vibration Characteristics of Gears With Tooth Surface Form Error",,"Journal of Mechanical Design","American Society of Mechanical Engineers","Vol. 131",,"p. 101003",2009,Oct.
"松村茂樹,北條春夫","動力伝達系の振動計測による歯面形状の特徴推定（軸受台上の振動計測による特徴推定）","2009年度年次大会","日本機械学会2009年度年次大会講演論文集","日本機械学会","Vol. 4","No. 09-1","pp. 53-54",2009,Sept.
"Shigeki MATSUMURA,Haruo HOUJOH","Effect of Some Parameters to Apply Centrifugal Pendulum Vibration Absorber to Gear System","The 3rd International Conference on Manufacturing, Machine Design and Tribology","Proceedings of The 3rd International Conference on Manufacturing, Machine Design and Tribology","The Korean Society of Mechanical Engineers",,,"pp. 195",2009,June
"SHIGEKI MATSUMURA,Haruo HOUJOH,Shun-ichi Ohshima","Characterization of Mesh Excitation Force Waveform with Vibration Measurement on Power Transmission Case","The JSME International Conference on Motion and Power Transmissions","Proceedings of The JSME International Conference on Motion and Power Transmissions","日本機械学会",,"No. 09-203","pp. 233-236",2009,May
"Toshiya Nagumo,SHIGEKI MATSUMURA,Haruo HOUJOH","Dynamic Characterization of Asymmetrical Sidebands of Mesh Frequency","The JSME International Conference on Motion and Power Transmissions","Proceedings of The JSME International Conference on Motion and Power Transmissions","日本機械学会",,"No. 09-203","pp. 227-232",2009,May
"Haruo HOUJOH,SHIGEKI MATSUMURA,SHUN-ICHI OHSHIMA,ratanasumawong chanat","Understanding Characteristics of Gear Noise in Terms of Vibration Analysis and the Effect of Various Tooth Finishing","37th International Congress and Exposition on Noise Control Engineering",,,,,"  No.410",2008,Oct.
"松村茂樹,大嶋俊一,北條春夫","歯車系の起振力推定のための位相情報の精密な取扱","日本機械学会 ２００８年度年次大会","日本機械学会 ２００８年度年次大会講演論文集","(社)日本機械学会","Vol. 4","No. 08-1","  43-44",2008,Aug.
"松村茂樹,北條春夫,ﾁｬﾅｯﾄﾗﾀﾅｽﾏｳｫﾝ,大嶋俊一","振動計測による歯車系の起振力推定に関する新たな提案","日本機械学会 第８回機素潤滑設計部門講演会","日本機械学会 第８回機素潤滑設計部門講演会講演論文集","(社)日本機械学会",,"No. 08-12","  173-174",2008,Apr.
"松村茂樹,北條春夫,立川直人","大振幅時でも等時性のある遠心振子式動吸振器の歯車装置への適用","日本機械学会 第８回機素潤滑設計部門講演会","日本機械学会 第８回機素潤滑設計部門講演会講演論文集","(社)日本機械学会",,"No. 08-12","  175-176",2008,Apr.
"松村茂樹,北條春夫","歯車装置の能動制振に関する基礎的研究（軸受部の振動低減）","日本機械学会2007年度年次大会","日本機械学会2007年度年次大会講演論文集","日本機械学会","Vol. 4","No. 07-1","pp. 43-44",2007,Dec.
"北條春夫,松村茂樹,森正人,大嶋俊一","はすば歯車のかみ合い部における媒質流体の運動挙動の実験的把握（水を媒質とした観察結果に基づく３次元挙動）","MPT2007シンポジウム＜伝動装置＞","MPT2007シンポジウム＜伝動装置＞講演論文集","日本機械学会",,"No. 07-15","pp. 94-97",2007,Nov.
"松村茂樹,北條春夫,chanat","動力伝達系の振動計測による歯面形状の特徴推定（位相情報の精密な取り扱いによる起振力推定）","MPT2007シンポジウム＜伝動装置＞","MPT2007シンポジウム＜伝動装置＞講演論文集","日本機械学会",,"No. N0.07-15","pp. 131-134",2007,Nov.
"Masato Mori,Haruo HOUJOH,SHIGEKI MATSUMURA,SHUN-ICHI OHSHIMA","THREE-DIMENSIONAL COORDINATES TRACKING METHOD OF TRACER PARTICLES","The 9th International Symposium on Fluid Control, Measurement and Visualization",,,,,"pp. 1195-1203",2007,Sept.
"SHIGEKI MATSUMURA,Chanat RATANASUMAWONG,Yuichi OGAWA,SHUN-ICHI OHSHIMA,Haruo HOUJOH","Phase Calibration of Vibration to Estimate Gear Excitation Force Characteristic","ICMDT 2007 JSME-KSME Joint InternationalConference on Manufacturing,Machine Design and Tribology","Proceedings of ICMDT 2007 JSME-KSME Joint InternationalConference on Manufacturing,Machine Design and Tribology","The Japan Society of Mechanical Engineers",,,"pp. A04(CD-ROM)",2007,July
"Haruo HOUJOH,RATANASUMAWONG Chanat,SHIGEKI MATSUMURA","Utilization of Synchronous Averaging for Inspection of Tooth Surface Undulations on Gears (Localization of Nonmesh Harmonic Components to Individual Gear)",,"Journal of Applied Mechanics","American Society for Mechanical Engineers (ASME)","Vol. 74",,"pp. 269-278",2007,Mar.
"Haruo Houjoh,Shigeki Matsumura","TOOTH SURFACE EVALUATION OF A HELICAL GEAR BY USING SYNCHRONOUS AVERAGE OF VIBRATION OF A GEAR PAIR",,"PROCEEDINGS OF THE INTERNATIONAL CONFERENCE ON MECHANICAL TRANSMISSIONS",,"Vol. 1",,"p. 996-1001",2006,Sept.
"北條春夫,森正人,折茂和久,大嶋俊一,松村茂樹","アクリル製はすば歯車を用いたかみ合い部における媒質流れの3次元可視化",,"日本機械学会　2006年度年次大会　講演論文集",,"Vol. 4","No. 06-1","p. 209-210",2006,Sept.
"北條 春夫,森 正人,松村 茂樹,古橋 朋裕,折茂 和久,大嶋 俊一","アクリルはすば歯車を用いたかみ合い部の媒質流れの可視化","第6回機素潤滑設計部門講演会","日本機械学会第6回機素潤滑設計部門講演会講演論文集","（社）日本機械学会","Vol. 06","No. 6","pp. 69-70",2006,May
"松村茂樹,北條春夫","遠心振子式動吸振器による歯車装置の振動低減に関する研究（２段減速機への適用）","日本機械学会 第６回機素潤滑設計部門講演会","日本機械学会 第６回機素潤滑設計部門講演会講演論文集","(社)日本機械学会","Vol. No.06-6",,"pp. 43-44",2006,May
"Chanat RATANASUMAWONG,Shigeki MATSUMURA,Haruo HOUJOH","Inspection of Tooth Surface Geometry by Means of Vibration Measurement(Assessment of Tooth Surface Undulation from Synchronous Averaged Signal and Application of Frequency Response Function)",,"JSME International Journal C",,"Vol. 48","No. 4","pp. 704-714",2005,Dec.
"松村茂樹,北條春夫","遠心振子式動吸振器による歯車装置の振動低減に関する基礎的研究","日本機械学会2005年度年次大会","日本機械学会2005年度年次大会講演論文集","(社)日本機械学会","Vol. No.05-1","No. Vol.4","pp. 201-202",2005,Sept.
"Haruo Houjoh,Shun-ichi Ohshima,SHIGEKI MATSUMURA,Masato Mori","Flow Visualization of Ambient Air about Mesh Ending Region of Helical Gear Pair by Means of Smoke Wire Method","International Conference on Gears, VDI","Proceedings of International Conference on Gears, VDI-Berichte",,,"No. 1904","pp. 1035-1051",2005,Sept.
"ratanasumawong chanat,SHIGEKI MATSUMURA,Haruo HOUJOH","Inspection of Tooth Surface Geometry by Means of Vibration Measurement","International Conference on Gears, VDI","Proceedings of International Conference on Gears, VDI-Berichte",,,"No. 1904","pp. 687-703",2005,Sept.
"S.Matsumura,H.Houjoh,T.Tsukanaka","Vibration Diagnosis Method of Multistage Gearing to Point Out Ghost Noise Source due to Amplitude Fluctuation Analysis -Experimental Verification-","The 1st International Conference on Manufacturing, Machine Design and Tribology","Proceedings of The 1st International Conference on Manufacturing, Machine Design and Tribology (CD)",,,,"pp. EGE-203(CD)",2005,June
"松村茂樹,北條春夫","振動の時間変動分析を用いた動力伝達系の診断","日本機械学会機素潤滑設計部門MPT2004シンポジウム＜伝動装置＞","日本機械学会機素潤滑設計部門MPT2004シンポジウム＜伝動装置＞講演論文集",,"Vol. No.04-17",,"pp. 194",2004,Nov.
"ﾁｬﾅｯﾄﾗﾀﾅｽﾏｳｫﾝ,松村茂樹,北條春夫","歯車単体の振動個性の抽出 ?同期平均による歯面の情報の取得?","日本機械学会2004年度年次大会","日本機械学会2004年度年次大会講演論文集（４）",,"Vol. 04","No. 1","pp. 143-144",2004,Sept.
"松村茂樹,北條春夫","振動の時間変動分析を用いた動力伝達系の診断（間欠運転される装置の診断）","日本機械学会2004年度年次大会","日本機械学会2004年度年次大会講演論文集",,"Vol. No.04-1","No. 4","pp. 147",2004,Sept.
"Chanat RATANASUMAWONG,Haruo HOUJOH,Shigeki MATSUMURA,Michio SAITOH,Yasushi UEDA","Utilization of Synchronous Averaging of Vibration for Diagnosis of Gear System to Estimate Tooth Error","DETC'03 ASME - 9th International Power Transmission and Gearing Conference","Proceedings of DETC'03 ASME - 9th International Power Transmission and Gearing Conference (CD-ROM, DETC2003/PTG)",,,,"pp. 48030",2003,June
"松村茂樹,宮瀬啓明,北條春夫","歯車の能動制振に関する研究（２自由度制振機構による検討）",,"日本機械学会第３回機素潤滑設計部門講演論文集",,"Vol. 03-03",,"pp. 17-20",2003,
"松村茂樹,北條春夫","はすば歯車の軽負荷時の振動特性（かみあい部の特性の実験的検討）",,"日本機械学会第２回機素潤滑設計部門講演論文集",,"Vol. 02-12",,"pp. 45-48",2002,
"松村茂樹,丸山 直浩,北條春夫,大嶋俊一,岡部信次","歯車の能動制振に関する基礎的研究",,"日本機械学会2001年度年次大会講演論文集",,"Vol. 01-1","No. III","pp. 181-182",2001,
"松村茂樹,北條春夫,大嶋俊一","歯面計測によるかみあい非整数次振動の発生予測",,"日本機械学会第１回機素潤滑設計部門講演論文集",,"Vol. 00-11",,"pp. 63-64",2001,
"松村茂樹,北條春夫,有川樹一郎","歯車系における要素間の振動伝達に関する研究",,"2000年度年次大会講演論文集（日本機械学会）",,"Vol. 2",,"pp. 411-412",2000,
"Shigeki MATSUMURA,Haruo HOUJOH,Shun-ichi OHSHIMA,Hiroaki NAGOYA","OBSERVATION OF GHOST NOISE ON GROUND GEARS WITH VIBRATION MEASUREMENT AND DETECTION OF SURFACE UNDULATION","8th International Power Transmission and Gearing Conference","Proceedings of DETC'00 8th International Power Transmission and Gearing Conference",,,,"pp. DETC2000/PTG-14425 (CD-ROM)",2000,
"Haruo HOUJOH,Shigeki Matsumura,Suguru Wada,Kiyohiko Umezawa,Yuichi Ogawa,Kouichi Usami","Influence of Rolling Element Bearings on Vibration of a Helical Gear Unit","4th World Congress on Gearing and Power Transmission","Proceedings of  4th World Congress on Gearing and Power Transmission",,"Vol. 3",,"pp. 2079-2089",1999,Mar.
"Kiyohiko Umezawa,Haruo HOUJOH,Shigeki Matsumura,Shaofeng Wang","Investigation of the Dynamic Behavior of a Helical Gear System - Dynamics of Gear Pairs with Bias Modification -",,"Proceedings of  4th World Congress on Gearing and Power Transmission",,"Vol. 3",,"pp. 1981-1990",1999,Mar.
"小川侑一,松村茂樹,北條春夫,佐藤太一,梅澤清彦","歯すじ方向誤差を考慮した平歯車の回転方向振動挙動の解析（第１報，シミュレータの開発と検証）",,"日本機械学会論文集 C編",,"Vol. 65","No. 634","pp. 2486-2493",1999,
"松村茂樹,北條春夫,名古屋博昭,梅澤清彦","歯車の振動計測による仕上がり歯面不良の検出",,"日本機械学会論文集 C編",,"Vol. 65","No. 632","pp. 1635-1641",1999,
"佐藤佳宏朗,松村茂樹,真境名信哉,北條春夫,和田選","動力伝達系の２自由度振動モデルの減衰係数の把握法",,"1999年度年次大会講演論文集（日本機械学会）",,"Vol. 5",,"pp. 283-284",1999,
"梅澤清彦,王韶峰,北條春夫,松村茂樹","はすば歯車系の振動解析(第4報,バイアス歯面修整歯車の振動解析)",,"日本機械学会論文集C編",,"Vol. 64","No. 620","pp. 1414-1420",1998,Apr.
"王韶峰,北條春夫,松村茂樹,梅澤清彦","はすば歯車系の振動解析（第３報，振動に及ぼす歯面形状の影響の解析法と評価法の提案）",,"日本機械学会論文集C編",,"Vol. 64","No. 617","pp. 324-329",1998,Jan.
"王韻峰,北條春夫,松村茂樹,梅澤清彦","はすば歯車系の振動解析（第２報，歯数比まで含めたシミュレーションの実験による検証）",,"日本機械学会論文集（Ｃ編）",,"Vol. 62","No. 601","p. 3647-3653",1996,Sept.
"王韻峰,梅澤清彦,北條春夫,松村茂樹","はすば歯車系の振動解析（第１報，起振力を考慮した多自由度振動シミュレーションの開発）",,"日本機械学会論文集（Ｃ編）",,"Vol. 62","No. 600","p. 3275-3282",1996,Aug.
"松村茂樹,梅澤清彦,北條春夫","誤差を考慮したはすば歯車の軽負荷における回転方向振動解析(第4報,歯形方向誤差と振動性能曲線)",,"日本機械学会論文集 C編",,"Vol. 62","No. 603","pp. 4324-4331",1996,
"松村茂樹,梅澤清彦,北條春夫","誤差を考慮したはすば歯車の軽負荷における回転方向振動解析(第3報,歯すじ方向誤差と振動性能曲線)",,"日本機械学会論文集 C編",,"Vol. 62","No. 603","pp. 4315-4323",1996,
"Matsumura, S.,Umezawa, K.,Houjoh, H","Rotational Vibration of a Helical Gear Pair Having Tooth Surface Deviation during Transmission of Light Load",,"JSME International Journal (C)",,"Vol. 39","No. 3","pp. 614-620",1996,
"松村茂樹,梅澤清彦,北條春夫","軽負荷伝達時のはすば歯車対の歯形誤差と回転方向振動",,"第73期通常総会講演会講演論文集(IV)(日本機械学会)",,,"No. 96-1","pp. 129-130",1996,
"松村茂樹","誤差を考慮した軽負荷時のはすば歯車の回転方向振動特性",,,,,,,1995,
"篠原竜太郎,北條春夫,梅澤清彦,王韶峰,谷治和文,松村茂樹","低振動はすば歯車装置の研究 -はすば歯車系の振動挙動の実験的把握法-",,"日本機械学会論文集 C編",,"Vol. 61","No. 582","pp. 702",1995,
"梅澤清彦,松村茂樹,北條春夫,市川信繁","誤差を考慮したはすば歯車の軽負荷における回転方向振動解析(第1報,誤差をもつ歯面の接触による近寄りの解析法)",,"日本機械学会論文集(C編)",,"Vol. 60","No. 575","pp. 2429",1994,
"松村茂樹,梅澤清彦,北條春夫","誤差を考慮したはすば歯車対の軽負荷における振動挙動",,"MPT'94 シンポジウム伝動装置講演論文集(日本機械学会)",,,"No. 940-58","pp. 104-107",1994,
"松村茂樹,梅澤清彦,北條春夫","誤差を考慮したはすば歯車の軽負荷における回転方向振動解析(第2報,回転方向振動シミュレーションの開発)",,"日本機械学会論文集(C編)",,"Vol. 60","No. 575","pp. 2436-2443",1994,