"Hayato YOSHIOKA,Teruto HIFUMI,Shingo TAJIMA","Identification and grouping defects for complement in measuring of workpiece with 3D scanner","Leading Edge Manufacturing/Material and Processing (LEM&P2023)",,,,,,2023,June
"Shingo TAJIMA,Yuta KOJIMA,Hayato YOSHIOKA","Displacement Compensation of Machining Robot based on Trajectory Control for High Accuracy","Leading Edge Manufacturing/Material and Processing (LEM&P2023)",,,,,,2023,June
"Yoshioka, H.","Advanced manufacturing systems based on mechatronics","The 25th International Conference on Mechatronics Technology",,,,,,2022,Nov.
"Kouguchi, J.,Yoshioka, H.","Estimation method of cutting forces and abnormal vibrations by using frequency separation of acceleration sensor signals","The 19th International Conference on Precision Engineering","Proceedings of the 19th International Conference on Precision Engineering",,,,,2022,Nov.
"Tajima, S.,Sencer, B.,Yoshioka, H.","Real-time interpolation of complex machining toolpaths with drive limits and vibration avoidance","The 19th International Conference on Precision Engineering","Proceedings of the 19th International Conference on Precision Engineering",,,,,2022,Nov.
"吉岡 勇人,遠藤 将貴,田島 真吾","工作機械ボルト結合部の伝熱特性に及ぼす接触面圧の影響","第14回 生産加工・工作機械部門講演会（生産加工・工作機械部門 企画）",,,,,,2022,Oct.
"吉岡勇人","熱変形抑制を目的としたCFRP複合材ボールねじ",,"砥粒加工学会誌",,"Vol. 66","No. 7","pp. 382-385",2022,July
"Shingo Tajima,Burak Sencer,Hayato Yoshioka","Trajectory Generation for Dual-Drive Servo Systems for Laser Processing with Local Corner Smoothing","2022 International Symposium on Flexible Automation (ISFA2022)",,,,,,2022,July
"Yang Li,Hayato Kojima,Shingo Tajima,Hayato Yoshioka","Study on The Vertical Vibration Behavior of Beam Caused by Driving Force","2022 International Symposium on Flexible Automation (ISFA2022)",,,,,,2022,July
"Yamada, M.,Kimura, T.,Kimura, N.,Watanabe, J.,Kartikasari, N.,He X.,Tiskratok, W.,Yoshioka, H.,Shinno, H.,Egusa, H.","The titanium nanosurface with biomimetic physical microenvironment to induce endogenous regeneration of the periodontium",,"ACS Applied Materials & Interfaces",,"Vol. 14","No. 24",,2022,June
"原佳之,吉岡勇人,田島真吾","研削力の時間領域および周波数領域における特徴量推移に基づく砥石表面状態変化の推定","2022年度精密工学会春季大会","2022年度精密工学会春季大会学術講演会講演論文集",,,,"pp. 393-394",2022,Mar.
"Showa, Y.,Yoshioka, H.","Reduction of the influence of non-repeatable run-out in X-Y plane on machining surface",,"International Journal of Automation Technology",,"Vol. 16","No. 2","pp. 149-156",2022,Mar.
"岩本啓志,田島真吾,吉岡勇人","冗長性を持つ産業用ロボットの機械加工における位置決めの高精度化","2022年度精密工学会春季大会","2022年度精密工学会春季大会学術講演会講演論文集",,,,"pp. 741-742",2022,Mar.
"宮下和也,吉岡勇人,田島真吾","産業用ロボットの固有振動数変化を考慮した速度プロファイル生成法","2022年度精密工学会春季大会","2022年度精密工学会春季大会学術講演会講演論文集",,,,"pp. 737-738",2022,Mar.
"山本健彰,田島真吾,吉岡勇人,奥山弥生,勝田悠介,江草宏","人工支台歯形状の特徴抽出に基づく自動評価システムの開発","2022年度精密工学会春季大会","2022年度精密工学会春季大会学術講演会講演論文集",,,,"pp. 580-581",2022,Mar.
"吉岡勇人,鳥居有沙","ハイパースペクトルデータを用いためっき液の状態推定",,"月刊 画像ラボ",,"Vol. 33","No. 1","pp. 6-9",2022,Jan.
"Fuga Yamamoto,Hayato Yoshioka,Shingo Tajima","Non-contact observation of tooth profile error of involute spur gears by using autocollimator","The 23rd International Symposium on Advanced Abrasive Technology",,,,,,2021,Nov.
"Kojima, Y.,Yoshioka, H.,Tajima, S.","Fine pattern fabrication on a 3D surface using fast tool servo for milling process","The 10th International Conference on Leading Edge Manufacturing in 21st Century",,,,,,2021,Nov.
"Hifumi, T.,Tajima, S.,Yoshioka, H.","Tool path control for singularity avoidance of 5-axis machine tool by combining circular arc and cubit spline","The 10th International Conference on Leading Edge Manufacturing in 21st Century",,,,,,2021,Nov.
"Muslimin,Katerina Mukti,Hasvienda M. Ridlwan,M. Sholeh,Ade Sumpena,Jiang Zhu,Hayato Yoshioka,Tomohisa Tanaka","Direct NC Toolpath Generation from 3D Point Cloud Datasets","the 9th Annual Southeast Asian International Seminar","Proceedings of the 9th Annual Southeast Asian International Seminar (ASAIS 2020)","Science and Technology Publications",,,"pp. 138-145",2021,Oct.
"Inoue, S.,Urata, A.,Kodama, T.,Tobias, H.,Maruyama, Y.,Fujita, S.,Shinno, H.,Yoshioka, H.","High precision mobile robotic manipulator for reconfigurable manufacturing systems",,"International Journal of Automation Technology",,"Vol. 15","No. 5","pp. 651-660",2021,Sept.
"Tajima, S.,Iwamoto, S.,Yoshioka, H","Kinematic tool-path smoothing for 6-axis industrial machining robots",,"International Journal of Automation Technology",,"Vol. 15","No. 5","pp. 621-630",2021,May
"正和裕太,吉岡勇人","工作機械用転がり軸受主軸における工具回転非同期振れによる加工面への影響の低減（加振システムによる加工面品位の改善）",,"日本機械学会論文集",,"Vol. 87","No. 894","p. 20-00343",2021,Feb.
"鳥居有沙,吉岡勇人,田島真吾,新野秀憲","ハイパースペクトルデータを用いためっき加工状態の認識および加工面の定量的評価",,"日本機械学会論文集",,"Vol. 86","No. 892","pp. 1-18",2020,Dec.
"酒田屋翔,吉岡勇人,田島真吾,新野秀憲","ファイバレーザを用いた鉄系材料に対する面取り",,"日本機械学会論文集",,"Vol. 86","No. 892","pp. 1-13",2020,Dec.
"Showa, Y.,Yoshioka, H.","Reduction of the influence on machining surface caused by tool nonrepeatable run-out of rolling bearing spindle for machine tools ?Evaluation of effectiveness of NRRO reduction on machining surface by an excitation system-","18th International Conference on Precision Engineering (ICPE2020)","Proceedings of ICPE2020",,,,"pp. C-1-12",2020,Nov.
"Tajima, S.,Sencer, B.,Yoshioka, H.","Kinematic smoothing for singularity avoidance in 5-axis machining","18th International Conference on Precision Engineering (ICPE2020)","Proceedings of ICPE2020",,,,"pp. C-1-9",2020,Nov.
"尾山直駿,吉岡勇人,奥山弥生,田島真吾,江草 宏,新野秀憲","光切断法を用いた人工歯形状評価法","2020年度精密工学会秋季大会学術講演会","2020年度精密工学会秋季大会学術講演会講演論文集",,,,"  E0102",2020,Sept.
"岩本啓志,吉岡勇人,田島真吾,新野秀憲","反力利用形カウンタウェイト機構における外乱応答特性","2020年度精密工学会秋季大会学術講演会","2020年度精密工学会秋季大会学術講演会講演論文集",,,,"  B0107",2020,Sept.
"吉岡勇人,橋本淳哉,田島真吾,新野秀憲","CFRPの繊維配向を考慮した工作機械テーブルの検討","2020年度精密工学会秋季大会学術講演会","2020年度精密工学会秋季大会学術講演会講演論文集",,,,"  B0101",2020,Sept.
"Yoshioka, H.,Saito, S.,Kato, J.,Shinno, H.,Goto, S.,Hori, N.","Improvement of thermal deformation in a newly developed steel CFRP composite ball screw","JSME 2020 Conference on Leading Edge Manufacturing/Materials and Processing (LEMP2020)","Proceedings of JSME 2020 Conference on Leading Edge Manufacturing/Materials and Processing (LEMP2020)",,,,,2020,June
"Tajima, S.,Sencer, B.,Yoshioka, H.,Shinno, H.","Smooth path blending for 5-axis machining","JSME 2020 Conference on Leading Edge Manufacturing/Materials and Processing (LEMP2020)","Proceedings of JSME 2020 Conference on Leading Edge Manufacturing/Materials and Processing (LEMP2020)",,,,,2020,June
"Hayato Yoshioka,Kotaro Kojima,Daisuke Toyota","Micro patterning on curved surface with a fast tool servo system for micro milling process",,"CIRP Annals - Manufacturing Technology",,"Vol. 69",,"pp. 325-328",2020,May
"正和裕太,吉岡勇人,新野秀憲","工作機械用転がり軸受主軸の工具回転非同期振れによる加工面影響の低減 (加振システムの開発)",,"日本機械学会論文集",,"Vol. 86","No. 884","p. 19-00450",2020,Apr.
"加藤 慎,河野 大輔,吉岡 勇人,杉田 直彦,浜口 顕秀,高野 和雅,飯島 一憲,柿沼 康弘","新構造材料適用省エネ型工作機械の熱変位および省エネルギー性能評価",,"日本機械学会論文集",,"Vol. 86","No. 884","p. 20-00002",2020,Apr.
"Jiang Zhu,Yurio Hosaka,Hayato Yoshioka","A Robust Algorithm to Remove the Self-intersection of 3D Mesh Data without Changing the Original Shape",,"Journal of physics : conference series","IOP Publishing","Vol. 1314","No. 1",,2019,Nov.
"酒田屋翔,吉岡勇人,新野秀憲,森敦","ファイバレーザを用いた鉄系材料に対する面取り加工","第13回生産加工・工作機械部門講演会（日本機械学会）","第13回生産加工・工作機械部門講演会（日本機械学会）講演論文集","一般社団法人 日本機械学会","Vol. 19","No. 307","pp. 122?124",2019,Oct.
"正和裕太,持田英樹,吉岡勇人,新野秀憲","工具回転非同期振れによる加工面影響を低減する加振システムの試作","第13回生産加工・工作機械部門講演会（日本機械学会）","第13回生産加工・工作機械部門講演会（日本機械学会）講演論文集","一般社団法人 日本機械学会","Vol. 19","No. 307","pp. 233-236",2019,Oct.
"西村美咲,吉岡勇人,新野秀憲","工作機械コラムの熱的・力学的特性評価","第13回生産加工・工作機械部門講演会（日本機械学会）","第13回生産加工・工作機械部門講演会(日本機械学会)講演論文集","一般社団法人 日本機械学会","Vol. 19","No. 307","pp. 230-232",2019,Oct.
"鳥居有紗,吉岡勇人,新野秀憲","ハイパースペクトルデータに基づいためっき工程の状態認識","第13回生産加工・工作機械部門講演会（日本機械学会）","第13回生産加工・工作機械部門講演会（日本機械学会）講演論文集","一般社団法人 日本機械学会","Vol. 19","No. 307","pp. 351-353",2019,Oct.
"吉岡勇人,田村勇樹,小島功太郎,新野秀憲","超磁歪素子を用いたフライス用工具サーボによる微細加工の基本特性評価","第13回生産加工・工作機械部門講演会（日本機械学会）","第13回生産加工・工作機械部門講演会（日本機械学会）講演論文集","一般社団法人 日本機械学会","Vol. 19","No. 307","pp. 237-239",2019,Oct.
"Chenyao Cao,Jiang Zhu,Tomohisa Tanaka,Fang-Jung Shiou,Shunichi Sawada,Hayato Yoshioka","Ball Burnishing of Mg Alloy Using a Newly Developed Burnishing Tool with On-machine Force Control",,"International Journal of Automation Technology","Fuji Technology Press Ltd.","Vol. 13","No. 5","pp. 619-630",2019,Sept.
"Leandro Batista da silva,Hayato Yoshioka,Hidenori Shinno,Jiang Zhu","Tool Orientation Angle Optimization for a Multi-axis Robotic Milling System",,"International Journal of Automation Technology","Fuji Technology Press Ltd.","Vol. 13","No. 5","pp. 574-582",2019,Sept.
"Yamada, M.,Kimura, T.,Nakamura N.,Yoshioka, H.,Shinno, H.,Egusa, H.","Biomimetic Titanium Nano-surface Promote Induction of Periodontal Ligaments","The 2019 IADR/AADR/CADR General Session & Exhibition",,,,,,2019,June
"杉田直彦,吉岡勇人,柿沼康弘,河野大輔","新構造材料適用省エネ型工作機械の研究開発","2019年度精密工学会春季大会","学術講演会講演論文集",,,,"pp. 211-212",2019,Mar.
"Leandro Batista Da Silva,JIANG ZHU,Hayato Yoshioka","Tool path optimization for multi-axis robotic milling system","the 18th International Machine Tool Engineers` Conference","Proceeding of the 18th International Machine Tool Engineers' Conference","Japan Machine Tool Builders' Association",,,"pp. 90-91",2018,Nov.
"Yoshioka, H.,Ji, Y.,Shinno, H.,Nishikawa, Y.,Mori, A.","Evaluation of groove machining characteristics of CFRP with fiber laser based on covariance structure analysis","The 17th International Conference on Precision Engineering (ICPE2018)","Proceedings of the 17th International Conference on Precision Engineering",,,,,2018,Nov.
"Kotaro Kojima,Yuuki Tamura,Hayato Yoshioka","Fine milling by magnetostrictive element-driven tool servo","The 18th International Machine Tool Engineerings' Conference","Proceeding of the 18th INternational Machine Tool Engineers' Conference",,,,"pp. 16-17",2018,Nov.
"加藤潤,吉岡勇人,新野秀憲,朝倉和廣,後藤俊輔,臼田敬介,堀伸充","CFRPを適用した熱変形抑制ボールねじの性能評価","2018年度精密工学会秋季大会学術講演会","2018年度精密工学会秋季大会学術講演会講演論文集","公益社団法人 精密工学会",,,"pp. 145-146",2018,Sept.
"鳥居有紗,吉岡勇人,新野秀憲","超多点法に基づくロバストな表面形状計測システム","2018年度精密工学会秋季大会学術講演会","2018年度精密工学会秋季大会学術講演会講演論文集","公益社団法人 精密工学会",,,"pp. 612-613",2018,Sept.
"Yamato, S.,Yamada, Y.,Nakanishi, K.,Suzuki, N.,Yoshioka, H.,Kakinuma, Y.","Integrated in-process chatter monitoring and automatic suppression with adaptive pitch control in parallel turning",,"Advances in Manufacturing",,"Vol. 6","No. 3","pp. 291-300",2018,May
"Sakata, S.,Kadota, T.,Yamada, Y.,Nakanishi, K.,Yoshioka, H.,Suzuki, N.,Kakinuma, Y.","Chatter avoidance in parallel turning with unequal pitch angle using observer-based cutting force estimation",,"Journal of Manufacturing Science and Engineering",,"Vol. 140","No. 4","pp. 044501-1 - 044501-7",2018,Apr.
"礒田颯,吉岡勇人,新野秀憲,沖野晃俊,川野浩明","大気圧プラズマによる材料加工の特性評価","2018年度精密工学会春季大会学術講演会",,,,,,2018,Mar.
"中村優之,吉岡勇人,新野秀憲","ハイパースペクトルデータに基づく研削砥石表面の定量的評価","2018年度精密工学会春季大会学術講演会",,,,,,2018,Mar.
"吉岡勇人","超精密加工機の状態モニタリング技術および機上測定技術",,"機械技術",,"Vol. 66","No. 1","pp. 25-28",2018,Jan.
"JIANG ZHU,Akira Tajima,TOMOHISA TANAKA,Hayato Yoshioka","Study on the accuracy improvement for laser forming processing of micro-wire","The 9th International Conference on Leading Edge Manufacturing in 21st Century","Proceeding of The 9th International Conference on Leading Edge Manufacturing in 21st Century","Japan Society of Mechanical Engineers",,,,2017,Nov.
"Hayato Yoshioka,Masahiro Akiyama,Hidenori Shinno","Approach detection of diamond cutting tool by using photoelectric effect","The International Conference on Leading Edge Manufacturing in 21st Century",,,,,,2017,Nov.
"Yoshioka, H.,Shinno, H.,Zhu, J.,Uchiumi, M","A newly developed zero-gravity vertical motion mechanism for precision machining",,"CIRP Annals - Manufacturing Technology",,"Vol. 66","No. 1","pp. 389-392",2017,July
"吉岡勇人,新野秀憲,田村勇樹","微細パターン表面加工を目的とした回転工具サーボ",,"自動車技術","公益社団法人自動車技術会","Vol. 71","No. 6","pp. 68-71",2017,June
"Sakata, S.,Kadota, T.,Yamada, Y.,Nakanishi, K.,Yoshioka, H.,Suzuki, N.,Kakinuma, Y.","Suppression of chatter vibration by unequal pitch turning applying estimated cutting force","12th International Manufacturing Science and Engineering Conference",,,,,,2017,June
"Yamada, Y.,Kadota, T.,Sakata, S.,Nakanishi, K.,Yoshioka, H.,N. Suzuki,Kakinuma, Y.","Parallel turning with unequal pitch angle for chatter avoidance","1st International Symposium on Applied Abstraction and Integrated Design",,,,,,2017,Mar.
"井上悟史,酒井康徳,田中智久,吉岡勇人,朱疆,星出薫,古澤竜二","静的状態での転がり 案内キャリッジに用 いる転動体の接触状 態の解明","2017年度精密工学会春季大会学術講演会","2017年度精密工学会春季大会学術講演会講演論文集","公益社団法人 精密工学会",,,,2017,Mar.
"内海 学,吉岡 勇人,朱 疆","CFRP 適用工作機械 における結合部と動 剛性の関係の研究","2017年度精密工学会春季大会学術講演会","2017年度精密工学会春季大会学術講演会講演論文集","公益社団法人 精密工学会",,,,2017,Mar.
"山内順平,朱疆,吉岡勇人","多軸工作機械の振動 モードの解明及び振 動を考慮した切削力 オブザーバの構築","2017年度精密工学会春季大会学術講演会","2017年度精密工学会春季大会学術講演会講演論文集","公益社団法人 精密工学会",,,,2017,Mar.
"澤田隼一,朱 疆,修芳仲,吉岡勇人","定力制御を可能とし たボールバニシング 工具に関する研究","2017年度精密工学会春季大会学術講演会","2017年度精密工学会春季大会学術講演会講演論文集","公益社団法人 精密工学会",,,,2017,Mar.
"堀田 駿介,吉岡 勇人,朱 疆,田中 智久","チタンへのレーザ照射条件が表面性状及び発色に与える影響","2017年度精密工学会春季大会学術講演会","2017年度精密工学会春季大会学術講演会講演論文集","公益社団法人 精密工学会",,,,2017,Mar.
"Sakata, Shinya,Kadota, Takashi,Yamada, Yuki,Nakanishi, Kenichi,Hayato Yoshioka,Suzuki, Norikazu,Kakinuma, Yasuhiro","CHATTER SUPPRESSION IN PARALLEL TURNING WITH UNEQUAL PITCH USING OBSERVER BASED CUTTING FORCE ESTIMATION","12th ASME International Manufacturing Science and Engineering Conference","PROCEEDINGS OF THE ASME 12TH INTERNATIONAL MANUFACTURING SCIENCE AND ENGINEERING CONFERENCE - 2017, VOL 3","AMER SOC MECHANICAL ENGINEERS",,,,2017,
"Hayato Yoshioka,Jiang Zhu,Toshiki Hanaoka,Yasunori Sakai","Influence of angular error in multi-axis machine tool on estimation of Machining force by disturbance observer","the 17th International Machine Tool Engineers` Conference","Proceedings of the 17th International Machine Tool Engineers` Conference","Japan Machine Tool Builders' Association",,,"pp. 132-133",2016,Nov.
"Hayato Yoshioka,Hidenori Shinno,Yuuki Tamura","Tool Servo System Driven by Giant Magnetostrictive Element for Milling Process","The 17th International Machine Tool Engineers' Conference(The 17th IMEC)","Proceedings of the 17th International Machine Tool Engineers' Conference(The 17th IMEC)","Japan Machine Tool Builders' Association",,,"p. 136",2016,Nov.
"Hayato Yoshioka,Hidenori Shinno,Motochika Shimizu,Hiroshi Sawano","Surface Texture Assessment Based on Analysis of Laser Speckle","The 17th International Machine Tool Engineers' Conference(The 17th IMEC)","Proceedings of the 17th International Machine Tool Engineers' Conference(The 17th IMEC)","Japan Machine Tool Builders' Association",,,"p. 178",2016,Nov.
"Yasunori Sakai,So Fukasawa,Jiang Zhu,Hayato Yoshioka,Tomohisa Tanaka,Kaoru Hoshide,Ryuji Furusawa","Influence of Designing Parameters on Vibration Damping of Rolling Guideway","16th International Conference on Precision Engineering","Proceeding of 16th International Conference on Precision Engineering","The Japan Society for Precision Engineering",,,,2016,Nov.
"Shunsuke Hotta,Jiang Zhu,Hayato Yoshioka,Tomohisa Tanaka","Study on the mechanism of titanium oxide layer growth by laser irradiation on titanium","16th International Conference on Precision Engineering","Proceeding of 16th International Conference on Precision Engineering","The Japan Society for Precision Engineering",,,,2016,Nov.
"Jiang Zhu,Shunsuke Hotta,Hayato Yoshioka,Tomohisa Tanaka","Study on the titanium oxide layer generation mechanism by YVO4 laser irradiation on titanium","the 8th Japan-Taiwan workshop on mechanical engineering and aerospace","Proceeding of the 8th Japan-Taiwan workshop on mechanical engineering and aerospace",,,,,2016,Nov.
"Shunsuke Hotta,Jiang Zhu,Tomohisa Tanaka,Hayato Yoshioka","Titanium Coloring Machining by Laser Irradiation","the 17th International Machine Tool Engineers` Conference","Proceedings of the 17th International Machine Tool Engineers` Conference","Japan Machine Tool Builders' Association",,,"pp. 84-85",2016,Nov.
"Noriyuki HASEGAWA,Hayato YOSHIOKA,Hidenori SHINNO","Noncontact Gravity Compensator with Magnetic Fluid Seals",,"Journal of Advanced Mechanical Design, Systems, and Manufacturing",,"Vol. 10","No. 5","pp. 1-10",2016,Oct.
"礒田颯,吉岡勇人,新野秀憲","超精密直動転がり案内テーブルにおけるMasing則に基づいた摩擦特性補償","第11回日本機械学会生産加工・工作機械部門講演会","第11回生産加工・工作機械部門講演会 講演論文集",,,,"pp. 35-36",2016,Oct.
"田村勇樹,吉岡勇人,新野秀憲","超磁歪素子駆動回転形高速工具サーボによるフライス加工状態のインプロセス認識","第11回日本機械学会生産加工・工作機械部門講演会","第11回生産加工・工作機械部門講演会 講演論文集",,,,"pp. 39-40",2016,Oct.
"門田崇志,山田雄基,中西賢一,橘純司,吉岡勇人,鈴木教和,柿沼康弘","推定切削力を応用した不等ピッチターニングによるびびり振動抑制","第11回日本機械学会生産加工・工作機械部門講演会","第11回生産加工・工作機械部門講演会 講演論文集",,,,"pp. 11-12",2016,Oct.
"澤田隼一,朱疆,修芳仲,吉岡勇人","ロードセルを内蔵した工具を用いたSUS420材のボールバニシング加工","第11回日本機械学会生産加工・工作機械部門講演会","第11回生産加工・工作機械部門講演会 講演論文集",,,,"pp. 137-138",2016,Oct.
"Muslimin,Zhu, J.,Yoshioka, H.,Tanaka, T.","Automatic segmentation and feature identification of laser scanning point cloud data for reverse engineering","International Symposium on Flexible Automation","Proceedings of International Symposium on Flexible Automation",,,,,2016,Aug.
"吉岡勇人","流体軸受の現状と今後の展望",,"砥粒加工学会誌","砥粒加工学会","Vol. 60","No. 7","pp. 358-361",2016,July
"Yuuki Tamura,Hayato Yoshioka,Hidenori Shinno","Rotary-axial positioning system with giant magnetostrictive element","7th CIRP Conference on High Performance Cutting (7th HPC 2016)","Procedia CIRP","Elsevier B.V.","Vol. 46",,"pp. 315-318",2016,May
"保坂 友利雄,朱 疆,吉岡 勇人","自己交差を含む三次元メッシュの形状維持修正法","日本機械学会関東支部第22期総会講演会","日本機械学会関東支部第22期総会講演会講演論文集","日本機械学会",,"No. 160-1",,2016,Mar.
"吉岡勇人,原田香奈子,大西孝,中本圭一,諸貫信行,光石衛","工作機械分野における産学連携による若手人材育成","日本機械学会関東支部第22期総会・講演会",,,,,,2016,Mar.
"田島彬,吉岡 勇人,朱 疆,田中智久","金属極細線のレーザフォーミングにおける加工精度向上手法の研究","2016年度精密工学会春季大会学術講演会","2016年度精密工学会春季大会学術講演会講演論文集","精密工学会",,,"pp. 817-818",2016,Mar.
"花岡俊樹,朱 疆,吉岡 勇人,酒井康徳","多軸工作機械の振動特性が外乱オブザーバによる切削力推定に及ぼす影響","2016年度精密工学会春季大会学術講演会","2016年度精密工学会春季大会学術講演会講演論文集","精密工学会",,,"pp. 761-762",2016,Mar.
"酒井康徳,朱 疆,吉岡 勇人,田中 智久","転がり案内の非線形な周波数応答に及ぼす潤滑油の影響","2016年度精密工学会春季大会学術講演会","2016年度精密工学会春季大会学術講演会講演論文集","精密工学会",,,"pp. 739-740",2016,Mar.
"堀田 駿介,吉岡 勇人,朱 疆,田中 智久","YVO4レーザを用いたチタンへのカラーリング-加工条件と発色の関係-","日本機械学会関東支部第22期総会講演会","日本機械学会関東支部第22期総会講演会講演論文集","日本機械学会",,"No. 160-1",,2016,Mar.
"深澤奏,酒井康徳,朱 疆,吉岡 勇人,田中 智久,星出 薫,古澤竜二","転動体の接触状態が転がり案内の減衰に及ぼす影響","日本機械学会関東支部第22期総会講演会","日本機械学会関東支部第22期総会講演会講演論文集","日本機械学会",,"No. 160-1",,2016,Mar.
"酒井康徳,深澤奏,朱 疆,吉岡 勇人,田中 智久,星出 薫,古澤竜二","転がり案内を模擬した接触減衰評価装置の試作","日本機械学会関東支部第22期総会講演会","日本機械学会関東支部第22期総会講演会講演論文集","日本機械学会",,"No. 160-1",,2016,Mar.
"バチスタ レアンドロ,酒井 康徳,朱 疆,吉岡 勇人","レーザダイシングにおける加工条件がSiCウェハの加工精度に及ぼす影響","日本機械学会関東支部第22期総会講演会","日本機械学会関東支部第22期総会講演会講演論文集","日本機械学会",,"No. 160-1",,2016,Mar.
"Motochika Shimizu,Hiroshi Sawano,Hayato YOSHIOKA,Hidenori SHINNO","On-machine surface texture measuring system using laser speckle pattern analysis",,"International Journal of Automation Technology",,"Vol. 10","No. 1","pp. 69-77",2016,Jan.
"田村勇樹,吉岡勇人,新野秀憲,澤野宏","超磁歪素子の自己検知機能を利用した微小位置決め機構の開発",,"日本機械学会論文集",,"Vol. 81","No. 832","pp. 1-13",2015,Dec.
"Muslimin,Jiang ZHU,Hayato YOSHIOKA,Tomohisa TANAKA,Yoshio SAITO","Study on plane feature extraction in registration of laser scanning data sets for reverse engineering",,"Journal of Advanced Mechanical Design, Systems, and Manufacturing",,"Vol. 9","No. 5","pp. 1-14",2015,Dec.
"Hayato Yoshioka,Hidenori Shinno,Hiroshi Sawano","A low-profile planar motion table system driven by steel belt",,"International Journal of Automation Technology",,"Vol. 9","No. 6","pp. 739-745",2015,Nov.
"吉岡勇人","エバネッセント光を用いたダイヤモンド工具と工作物との接触認識",,"ニューダイヤモンド",,"Vol. 31","No. 4","pp. 15-18",2015,Oct.
"Tomohisa Tanaka,Syo Harada,Jiang Zhu,Hayato Yoshioka,Yoshio Saito","Fundamental Study for Control of Hue and Brightness in the Laser Coloring","The 8th International Conference on Leading Edge Manufacturing in 21st Century","Proceeding of the 8th International Conference on Leading Edge Manufacturing in 21st Century","the Japan Society of Mechanical Engineers",,,,2015,Oct.
"Muslimin,Jiang Zhu,Hayato Yoshioka,Tomohisa Tanaka,Yoshio Saito","The Utilization of Feature Extraction in Registration Method of Laser Data Sets in Reverse Engineering of Fidelity and Precision Part","The 8th International Conference on Leading Edge Manufacturing in 21st Century","Proceeding of the 8th International Conference on Leading Edge Manufacturing in 21st Century","the Japan Society of Mechanical Engineers",,,,2015,Oct.
"Jiang Zhu,Masato Kato,Hayato Yoshioka,Yoshio Saito,Tomohisa Tanaka","Research on Feature Recognition from STEP model for Automatic Process Planning of Multi-tasking Machine","The 6th International Conference of Asian Society for Precision Engineering and Nanotechnology (ASPEN2015)","Proceeding of the 6th International Conference of Asian Society for Precision Engineering and Nanotechnology (ASPEN2015)","Asian Society for Precision Engineering and Nanotechnology(ASPEN)",,,,2015,Sept.
"酒井康徳,朱,吉岡勇人,田中智久","有限要素法を用いたローラガイドの鉛直及び横方向剛性の同定","日本機械学会2015年度年次大会",,,,,,2015,Sept.
"吉岡勇人,柿沼康弘,鈴木教和","工作機械の知能化を支えるオブザーバ技術，機械技術と切削理論応用技術",,"砥粒加工学会誌","公益社団法人 砥粒加工学会","Vol. 59","No. 9","pp. 502-507",2015,Sept.
"Jiang ZHU,Masato KATO,Tomohisa TANAKA,Hayato YOSHIOKA,Yoshio SAITO","Graph based automatic process planning system for multi-tasking machine",,"Journal of Advanced Mechanical Design, Systems, and Manufacturing","The Japan Society of Mechanical Engineers","Vol. 9","No. 3",,2015,Aug.
"Hiroshi Sawano,Yusuke Nakamura,Hayato Yoshioka,Hidenori Shinno","High performance hydrostatic bearing using a variable inherent restrictor with a thin metal plate",,"Precision Engineering",,"Vol. 41",,"pp. 78-85",2015,July
"長瀬重信,朱疆,吉岡勇人,齋藤義夫,田中智久","分割領域毎の最適加工パスによる自由曲面加工の効率化","2015年度精密工学会春季大会学術講演会","2015年度精密工学会春季大会学術講演会講演論文集","社団法人精密工学会",,,"pp. 771-772",2015,Mar.
"原田将,朱 疆,田中智久,吉岡勇人,齋藤義夫","チタンへのレーザ照射による構造色に関する研究?色再現性の向上と広色空間の実現","日本機械学会生産システム部門研究発表講演会2015","日本機械学会生産システム部門研究発表講演会2015講演論文集","一般社団法人 日本機械学会",,"No. 15-8","pp. 109-110",2015,Mar.
"Motochika SHIMIZU,Hiroshi SAWANO,Hayato YOSHIOKA,Hidenori SHINNO","Multi-dimensional assessment of nano/micro scale surface texture using laser speckle pattern analysis",,"Journal of Advanced Mechanical Design, Systems, and Manufacturing",,"Vol. 9","No. 1","pp. 1-13",2015,Mar.
"高卉?,朱疆,吉岡勇人,齋藤義夫,田中智久","自律分散システムを用いた柔軟な生産スケジューリングシステムの構築","2015年度精密工学会春季大会学術講演会","2015年度精密工学会春季大会学術講演会講演論文集","社団法人精密工学会",,,"pp. 267-268",2015,Mar.
"角倉大輔,新野 秀憲,吉岡 勇人,澤野 宏","反射光の強度変化を利用した切削加工面粗さの評価","2015年度精密工学会春季大会学術講演会","2015年度精密工学会春季大会学術講演会講演論文集",,,,"pp. 195-196",2015,Mar.
"田村勇樹,澤野 宏,吉岡 勇人,新野 秀憲","磁束密度を用いた超磁歪素子駆動微動機構の位置決め","2015年度精密工学会春季大会学術講演会","2015年度精密工学会春季大会学術講演会講演論文集",,,,"pp. 565-566",2015,Mar.
"津村 拓実,澤野 宏,吉岡 勇人,新野 秀憲","気液二層潤滑による空気静圧軸受の高剛性化","2015年度精密工学会春季大会学術講演会","2015年度精密工学会春季大会学術講演会講演論文集",,,,"pp. 349-350",2015,Mar.
"酒井康徳,吉岡勇人,朱疆,齋藤義夫,田中智久","転がり案内における非線形摩擦に起因する振動の複素ばねモデルを用いた解析","2015年度精密工学会春季大会学術講演会","2015年度精密工学会春季大会学術講演会講演論文集","社団法人精密工学会",,,"pp. 351-352",2015,Mar.
"Muslimin,Jiang Zhu,Hayato Yoshioka,Tomohisa Tanaka,Yoshio Saito","A New Method for Registration Laser Data Sets and CMM Data Sets in Reverse Engineering of Accurate Part","Spring Annual Meeting of the Japan Society for Procession Engineering 2015","Proceeding of Spring Annual Meeting of the Japan Society for Procession Engineering 2015","The Japan Society of Precision Engineering",,,"pp. 1101-1102",2015,Mar.
"Saurabh Bhide,Jiang Zhu,Hayato Yoshioka,Tomohisa Tanaka,Yoshio Saito","Calculation of Intersection Points between Triangulated Mesh and Point Cloud Data","Spring Annual Meeting of the Japan Society for Procession Engineering 2015","Proceeding of Spring Annual Meeting of the Japan Society for Procession Engineering 2015","The Japan Society of Precision Engineering",,,"pp. 1099-1100",2015,Mar.
"原幹也,朱疆,吉岡勇人,齋藤義夫,田中智久","切削条件がPTFEの加工面精度に与える影響に関する研究","2015年度精密工学会春季大会学術講演会","2015年度精密工学会春季大会学術講演会講演論文集","社団法人精密工学会",,,"pp. 1039-1040",2015,Mar.
"加藤雅人,朱疆,吉岡勇人,齋藤義夫,田中智久","グラフを用いた複合加工機のための自動加工工程設計システム","2015年度精密工学会春季大会学術講演会","2015年度精密工学会春季大会学術講演会講演論文集","社団法人精密工学会",,,"pp. 773-774",2015,Mar.
"Yasunori SAKAI,Tomohisa TANAKA,Hayato YOSHIOKA,Jiang ZHU,Masaomi TSUTSUMI,Yoshio SAITO","Influence of nonlinear spring behavior of friction on dynamic characteristics of a rolling guideway",,"Journal of Advanced Mechanical Design, Systems, and Manufacturing","The Japan Society of Mechanical Engineers","Vol. 9","No. 1","pp. 1-15",2015,Jan.
"Yasunori Sakai,Jiang, Z.,Hayato Yoshioka,Tanaka, T.","New identification method for dynamic characteristics of roller guideway based on finite element model",,"Proceedings - ASPE 2015 Annual Meeting",,,,"pp. 357-362",2015,
"Yuuki Tamura,Hiroshi Sawano,Hayato Yoshioka,Hidenori Shinno","A thermally stable aerostatic spindle system equipped with self-cooling function",,"Journal of Advanced Mechanical Design, Systems, and Manufacturing","The Japan Society of Mechanical Engineers","Vol. 8","No. 6","pp. 1-10",2014,Dec.
"Yasunori Sakai,JIANG ZHU,TOMOHISA TANAKA,Hayato Yoshioka,YOSHIO SAITO","Influence of Excitation Force on Damping of Rolling Guideway in Feed and Pitch Direction","the 16th International Machine Tool Engineers` Conference","Proceeding of the 16th International Machine Tool Engineers` Conference","Japan Machine Tool Builders' Association",,,,2014,Nov.
"Hiroshi Sawano,Yusuke Nakamura,Hayato Yoshioka,Hidenori Shinno","High performance hydrostatic bearing using a variable inherent restrictor","The 16th International Machine Tool Engineers' Conference","Proceedings of the 16th International Machine Tool Engineers' Conference","Japan Machine Tool Builders' Association",,,"p. 169",2014,Nov.
"yuanrui zhang,JIANG ZHU,Hayato Yoshioka,YOSHIO SAITO,TOMOHISA TANAKA","Study on the error compensation and accuracy improvement of 6-DOF parallel mechanism worktable","the 16th International Machine Tool Engineers` Conference","Proceeding of the 16th International Machine Tool Engineers` Conference","Japan Machine Tool Builders' Association",,,,2014,Nov.
"Hayato Yoshioka,Ryoichi Tanigawa,Hiroshi Sawano,Hidenori Shinno","Direct measurement of relative distance between tool and workpiece using an evanescent light","The 16th International Machine Tool Engineers' Conference","Proceedings of the 16th International Machine Tool Engineers' Conference","Japan Machine Tool Builders' Association",,,"p. 170",2014,Nov.
"田村勇樹,澤野宏,吉岡勇人,新野秀憲","超磁歪素子の自己検知機能を用いた微小位置決め機構","第10回 日本機械学会生産加工・工作機械部門講演会",,,,,"pp. 111-112",2014,Nov.
"酒井康徳,朱 疆,田中智久,吉岡勇人,齋藤義夫","転がり出し領域における摩擦が転がり案内の送り方向動特性に及ぼす影響","第10回 日本機械学会生産加工・工作機械部門講演会",,,,,"pp. 97-98",2014,Nov.
"村井 花菜,澤野 宏,吉岡 勇人,新野 秀憲","超多点法による高速かつロバストな広範囲表面形状測定","第10回生産加工・工作機械部門講演会","第10回生産加工・工作機械部門講演会講演前刷集",,,,"pp. 247-248",2014,Nov.
"Yasunori SAKAI,Jiang Zhu,Tomohisa Tanaka,Hayato Yoshioka,Yoshio Saito","Influence of Hysteresis Behavior of Friction on Dynamic Characteristics of Rolling Guideway","MECHATRONICS 2014","Proceedings of MECHATRONICS 2014",,,"No. OS-000671",,2014,Nov.
"Takumi Tsumura,Hayato Yoshioka,Hidenori Shinno,Hiroshi Sawano","Magnetically preloaded aerostatic guideway for high speed nanometer positioning",,"Journal of Advanced Mechanical Design, Systems, and Manufacturing","The Japan Society of Mechanical Engineers","Vol. 8","No. 4","pp. 1-11",2014,Oct.
"Motochika Shimizu,hiroshi sawano,Hayato Yoshioka,Hidenori Shinno","Multi-dimensional assessment of precision machined surface texture based on laser speckle pattern analysis","9th CIRP Conference on Intelligent Computation in Manufacturing Engineering","Proceedings of the 9th CIRP Conference on Intelligent Computation in Manufacturing Engineering",,,,,2014,July
"吉岡勇人","はじめての精密工学 精密加工におけるインプロセス計測",,"精密工学会誌",,"Vol. 80","No. 7","pp. 646-649",2014,July
"Yuichi Mizutani,hiroshi sawano,Hayato Yoshioka,Hidenori Shinno","Magnetic fluid seal for linear motion system with gravity compensator","9th CIRP Conference on Intelligent Computation in Manufacturing Engineering","Proceedings of the 9th CIRP Conference on Intelligent Computation in Manufacturing Engineering",,,,,2014,July
"Hayato Yoshioka,HIDENORI SHINNO,hiroshi sawano,Ryoichi Tanigawa","Monitoring of distance between diamond tool edge and workpiece surface in ultraprecision cutting using evanescent light",,"CIRP Annals - Manufacturing Technology","Elsevier","Vol. 63","No. 1","pp. 341-344",2014,June
"Motochika Shimizu,Hiroshi Sawano,Hayato Yoshioka,Hidenori Shinno","Surface texture assessment of ultra-precision machined parts based on laser speckle pattern analysis",,"Precision Engineering",,"Vol. 38","No. 1","pp. 1-8",2014,Jan.
"Takumi Tsumura,Hayato Yoshioka,hidenori shinno,sawano hiroshi","Magnetic Attraction Force-preloaded Aerostatic Guideway for High Speed Nano Positioning System","The 7th International Conference on Leading Edge Manufacturing in 21st Century","Proceedings of The 7th International Conference on Leading Edge Manufacturing in 21st Century",,,,,2013,Nov.
"Takuya KOMIYAMA,Hiroshi SAWANO,Hayato Yoshioka,hidenori shinno","A Long-Range Straightness Measurement with Motion Error Compensation","The 7th International Conference on Leading Edge Manufacturing in 21st Century","Proceedings of the 7th International Conference on Leading Edge Manufacturing in 21st Century",,,,,2013,Nov.
"Hiroshi Sawano,Yusuke Nakamura,Hayato Yoshioka,Hidenori Shinno","High performance hydrostatic bearing with a variable inherent restrictor","12th International Symposium in Fluid Control, Measurement and Visualization (FLUCOME 2013)","Proceedings of the 12th International Symposium in Fluid Control, Measurement and Visualization",,,"  OS19-01-3","pp. 1-7",2013,Nov.
"Hidenori SHINNO,Hayato YOSHIOKA,Hiroshi SAWANO","A Framework for Systematizing Machine Tool Engineering",,"International Journal of Automation Technology",,"Vol. 7","No. 6","pp. 760-768",2013,Nov.
"吉岡勇人","超精密加工システム「ANGEL」の構造と加工事例",,"機械と工具","日本工業出版","Vol. 3","No. 8","pp. 8-12",2013,Aug.
"Hayato YOSHIOKA,Hiroshi SAWANO,Hidenori SHINNO","A newly developed rotary-linear motion platform with a giant magnetostrictive actuator",,"CIRP Annals - Manufacturing Technology",,"Vol. 62","No. 1","pp. 371-374",2013,June
"Hayato YOSHIOKA,Mamoru HAYASHI,Hiroshi SAWANO,Hidenori SHINNO","Sensorless monitoring of machining torque on tilting platform driven by hybrid actuator","13th International Conference of the European Society for Precision Engineering and Nanotechnology","Proceedings of the 13th International Conference of the European Society for Precision Engineering and Nanotechnology",,"Vol. 1",,"pp. 326-329",2013,May
"中村 悠亮,澤野 宏,吉岡 勇人,新野 秀憲","可変自成絞りのよる油静圧軸受の高性能化","2013年度精密工学会春季大会学術講演会","2013年度精密工学会春季大会学術講演会講演論文集",,,,"pp. 723-724",2013,Mar.
"吉岡勇人","国際会議報告：14th International Conference on Precision Engineering (ICPE2012) 報告",,"精密工学会誌","公益社団法人 精密工学会","Vol. 79","No. 2","pp. 187-187",2013,
"新野秀憲,澤野宏,吉岡勇人","高度機能集積形マザーマシンの実現をめざして","沼田記念論文賞記念講演",,,,,,2013,
"澤野宏,後閑利通,吉岡勇人,新野秀憲","STMの測定原理を応用した三次元測定機の開発","沼田記念論文賞記念講演",,,,,,2013,
"Motochika Shimizu,Hiroshi Sawano,Hayato Yoshioka,Hidenori Shinno","Surface texture assessment of ultra-precision machined parts using a laser speckle method","The 15th International Machine Tool Engineers' Conference","Proceedings of the 15th International Machine Tool Engineers' Conference","Japan Machine Tool Builders' Association",,,"pp. 102-103",2012,Nov.
"Kensuke Kuze,Hiroshi Sawano,Hayato Yoshioka,Hidenori Shinno","Hydrostatic bearing with high bulk modulus fluid","14th International Conference on Precision Engineering","Emerging Technology in Precision Engineering XIV",,"Vol. 14",,"pp. 532-537",2012,Nov.
"Yuuki Tamura,Hiroshi Sawano,Hayato Yoshioka,Hidenori Shinno","A thermally stable high speed spindle system equipped with self-cooling function","14th International Conference on Precision Engineering","Emerging Technology in Precision Engineering XIV",,"Vol. 14",,"pp. 527-531",2012,Nov.
"Hiroshi Sawano,Hayato Yoshioka,Hidenori Shinno","An ultra-precision machining system equipped with an on-machine noncontact profile measuring function","The 15th International Machine Tool Engineers' Conference","Proceedings of the 15th International Machine Tool Engineers' Conference","Japan Machine Tool Builders' Association",,,"pp. 106-107",2012,Nov.
"谷川 涼一,吉岡 勇人,澤野 宏,新野 秀憲","エバネッセント光を用いた工具‐工作物間距離の直接的計測","第9回生産加工・工作機械部門講演会","第9回生産加工・工作機械部門講演会講演前刷集","日本機械学会",,,"pp. 219-220",2012,Oct.
"新野秀憲,吉岡勇人","3.3 材料加工",,"機械工学総論","日本機械学会","Vol. 1",,"pp. 116-119",2012,Oct.
"澤野 宏,綾田 翔,吉岡 勇人,新野 秀憲","低融点合金を用いた高速回転主軸用オートバランサ","第9回生産加工・工作機械部門講演会","第9回生産加工・工作機械部門講演会講演前刷集","日本機械学会",,,"pp. 43-44",2012,Oct.
"吉岡 勇人,井手 隼人,澤野 宏,新野 秀憲","光学的手法を用いた工具‐工作物接触状態検知に関する研究","2012年度精密工学会秋季大会学術講演会","2012年度精密工学会秋季大会学術講演会講演論文集",,,,"pp. 829-830",2012,Sept.
"Hiroshi Sawano,Toshimichi Gokan,Hayato Yoshioka,Hidenori Shinno","A newly developed STM-based coordinate measuring machine",,"Precision Engineering","Elsevier","Vol. 36","No. 4","pp. 538-545",2012,July
"Hiroshi SAWANO,Hayato YOSHIOKA,Hidenori SHINNO","A newly developed nano-pattern generator equipped with an on-machine measuring function","12th International Conference of the European Society for Precision Engineering and Nanotechnology","Proceedings of the 12th International Conference of the European Society for Precision Engineering and Nanotechnology",,"Vol. 2",,"pp. 189-192",2012,June
"Motochika Shimizu,Hiroshi SAWANO,Hayato YOSHIOKA,Hidenori SHINNO","Surface texture characterization of ultra-precision machined parts based on laser speckle pattern analysis","12th International Conference of the European Society for Precision Engineering and Nanotechnology","Proceedings of the 12th International Conference of the European Society for Precision Engineering and Nanotechnology",,"Vol. 1",,"pp. 154-157",2012,June
"Hayato YOSHIOKA,Yugo KURISAKI,Hiroshi SAWANO,Hidenori SHINNO","A newly developed ripple-free precision toroidal type motor",,"CIRP Annals - Manufacturing Technology",,"Vol. 61","No. 1","pp. 363-366",2012,May
"Hayato YOSHIOKA,Yugo KURISAKI,Hiroshi SAWANO,Hidenori SHINNO","A Newly Developed Toroidal Type Torque Ripple-free Precision Motor","15th International Conference on Mechatronics Technology","Proceedings of the 15th International Conference on Mechatronics Technology",,,,"pp. 504-507",2011,Nov.
"Hayato YOSHIOKA,Yusuke FUJIKI,Hiroshi SAWANO,Hidenori SHINNO","In-process Ultrasonic Monitoring Method for Cutting Process","The 6th Internarional Conference on Leading Edge Manufacturing in 21st Century","Proceedings of The 6th Internarional Conference on Leading Edge Manufacturing in 21st Century",,,,,2011,Nov.
"綾田 翔,澤野 宏,吉岡 勇人,新野 秀憲","ＡＦＭプローブを用いた三次元形状計測システム",,"日本機械学会論文集（Ｃ編）","日本機械学会","Vol. 77","No. 782","pp. 3597-3607",2011,Oct.
"清水一力,澤野宏,吉岡勇人,新野秀憲","精密機械システム用非接触構造アクティブ除振ユニット",,"日本機械学会論文集（Ｃ編）","日本機械学会","Vol. 77","No. 782","pp. 3572-3580",2011,Oct.
"H.Shinno,H.Yoshioka,H.Sawano","A newly developed long range positioning table system with a sub-nanometer resolution",,"CIRP Annals - Manufacturing Technology","Elsevier","Vol. 60","No. 1","pp. 403-406",2011,June
"Hiroshi SAWANO,Sho AYADA,Hayato YOSHIOKA,Hidenori SHINNO","A Newly Developed AFM-based Three Dimensional Profile Measuring System","11th International Conference of the European Society for Precision Engineering and Nanotechnology","Proceedings of the 11th International Conference of the European Society for Precision Engineering and Nanotechnology",,"Vol. 1",,"pp. 108-112",2011,May
"Mamoru Hayashi,Hayato YOSHIOKA,Hidenori SHINNO,Hiroshi Sawano","A Hybrid Actuator-driven Compact Tilting Motion Table System for Multi-axis Ultraprecision Machine Tool","11th International Conference of the European Society for Precision Engineering and Nanotechnology","Proceedings of the 11th International Conference of the European Society for Precision Engineering and Nanotechnology",,"Vol. 2",,"pp. 19-22",2011,May
"Hayato YOSHIOKA,Shota Kuroyama,Hiroshi Sawano,Hidenori SHINNO","Structural Design of Long Range Sub-Nanometer Positioning System","11th International Conference of the European Society for Precision Engineering and Nanotechnology","Proceedings of the 11th International Conference of the European Society for Precision Engineering and Nanotechnology",,"Vol. 1",,"pp. 367-370",2011,May
"Hiroshi Sawano,Ryosuke Kobayashi,Hayato Yoshioka,Hidenori Shinno","A Proposed Ultraprecision Machining Process Monitoring Method Using Causal Network Model of Air Spindle System",,"International Journal of Automation Technology","Fuji Technology Press","Vol. 5","No. 3","pp. 362-368",2011,Apr.
"Hiroshi Sawano,Motohiro Takahashi,Hayato Yoshioka,Hidenori Shinno,Kimiyuki Mitsu","On-Machine Optical Surface Profile Measuring System for Nano-Machining",,"International Journal of Automation Technology","Fuji Technology Press","Vol. 5","No. 3","pp. 369-376",2011,Apr.
"Hayato Yoshioka,Hidenori Shinno","Structural Design of a Newly Developed Ultraprecision Machine Tool "ANGEL"","International Symposium on Ultraprecision Engineering and Nanotechnology","Symposium Proceedings of ISUPEN 2011",,,,"pp. 48-51",2011,Mar.
"Hayato YOSHIOKA,Hidenori SHINNO","Design Concept and Structural configuration of Advanced Nano-Pattern Generator with Large Work Area"ANGEL"",,"International Journal of Automation Technology","Fuji Technology Press","Vol. 5","No. 1","pp. 38-44",2011,Jan.
"田中 忠志,遠藤 克仁,吉岡勇人","大形工作機械のリーディングカンパニー",,"精密工学会誌","公益社団法人 精密工学会","Vol. 77","No. 4","pp. 345-348",2011,
"清水 一力,澤野 宏,吉岡 勇人,新野 秀憲","精密機械システム用非接触構造アクティブ除振ユニットの開発","第8回生産加工・工作機械部門講演会","第8回生産加工・工作機械部門講演会講演前刷集","日本機械学会",,,"pp. 315-316",2010,Nov.
"綾田 翔,澤野 宏,吉岡 勇人,新野 秀憲","AFMプローブを用いた三次元形状計測システム","第8回生産加工・工作機械部門講演会","第8回生産加工・工作機械部門講演会講演前刷集","日本機械学会",,,"pp. 171-172",2010,Nov.
"吉岡勇人,新野秀憲","超精密切削加工機におけるトライボロジー",,"トライボロジスト",,"Vol. 55","No. 11","pp. 797-802",2010,Nov.
"Ryosuke KOBAYASHI,Hiroshi SAWANO,Hayato YOSHIOKA,Hidenori SHINNO","A Proposed Ultraprecision Machining Process Monitoring Using Causal Network Model of Air Spindle Bearing System","4th CIRP International Conference on High Performance Cutting (HPC2010), 24-26th October, 2010","4th CIRP International Conference on High Performance Cutting (HPC2010) Proceedings",,"Vol. 2",,"pp. 281-284",2010,Oct.
"Hiroshi Sawano,Yugo Kurisaki,Hayato Yoshioka,Hidenori Shinno","A Newly Developed Advanced Nano-Pattern Generator with Large Work Area","The 14th International Machine Tool Engineers' Conference","Proceedings of the 14th International Machine Tool Engineers' Conference","Japan Machine Tool Builders' Association",,,"pp. 70-71",2010,Oct.
"Hiroshi SAWANO,Motohiro TAKAHASHI,Hayato YOSHIOKA,HIdenori SHINNO,Kimiyuki MITSUI","On-Machine Shape Measuring System by Means of Optical Stylus for Nano-Machining","4th CIRP International Conference on High Performance Cutting (HPC2010), 24-26th October, 2010","4th CIRP International Conference on High Performance Cutting (HPC2010) Proceedings",,"Vol. 2",,"pp. 211-214",2010,Oct.
"Hiroshi Sawano,Toshimichi Gokan,Hayato Yoshioka,Hidenori Shinno","Three-dimensional nano-motion system for SPM-based CMM",,"Journal of Advanced Mechanical Design, Systems, and Manufacturing","The Japan Society of Mechanical Engineers","Vol. 4","No. 6","pp. 1192-1200",2010,Oct.
"吉岡勇人","機械工学年鑑 加工学・加工機器 16.8加工計測",,"日本機械学会誌","日本機械学会","Vol. 113","No. 1101","p. 642",2010,Aug.
"Yugo KURISAKI,Hiroshi SAWANO,Hayato YOSHIOKA,Hidenori SHINNO","A Newly Developed X-Y Planar Nano-Motion Table System with Large Travel Ranges",,"Journal of Advanced Mechanical Design, Systems, and Manufacturing","The Japan Society of Mechanical Engineers","Vol. 4","No. 5","pp. 976-984",2010,Aug.
"Hayato Yoshioka,Hiroyuki Kobayashi,Hiroshi Sawano,Hidenori Shinno","Development of Steel Belt-Driven XY Positioning Table System","2010 International Symposium on Fexible Automation","Proceedings of 2010 International Symposium on Flexible Automation(ISFA), CD-ROM",,,,,2010,July
"新野秀憲,吉岡勇人","完全非接触鉛直軸ナノ運動機構の開発とその性能評価",,"RC240 多軸複合工作機械の高度化技術に関する研究分科会研究報告書","社団法人 日本機械学会",,,"pp. 41-44",2010,June
"Hayato YOSHIOKA,Hiroshi SAWANO,Hidenori SHINNO","A Newly Developed Ultraprecision Machine Tool "Angel"","euspen International Conference","Proceedings of the euspen International Conference",,"Vol. 2",,"pp. 239-242",2010,June
"Hayato YOSHIOKA,Shota Kuroyama,Hiroshi SAWANO,Hidenori SHINNO","Sub-Nanometer Positioning with a High Resolution Laser Interferometer","euspen International Conference","Proceedings of the euspen International Conference",,"Vol. 1",,"pp. 404-407",2010,June
"Hiroshi SAWANO,Toshimichi GOKAN,Hayato YOSHIOKA,Hidenori SHINNO","Three-dimensional nano-positioning system for compact CMM","euspen International Conference","Proceedings of the euspen International Conference",,"Vol. 1",,"pp. 144-147",2010,June
"Hidenori SHINNO,Hayato YOSHIOKA,Toshimichi GOKAN,Hiroshi SAWANO","A Newly Developed Three-Dimensional Profile Scanner with Nanometer Spatial Resolution",,"CIRP  Annals - Manufacturing Technology (International Academy of Production Engineering)","Elsevier","Vol. 59","No. 1","pp. 525-528",2010,June
"新野秀憲,吉岡勇人","広域ナノパターンジェネレータ（ANGEL)の開発",,"機械技術","日刊工業新聞社","Vol. 58","No. 5","pp. 18-22",2010,May
"吉岡勇人,新野秀憲","超精密加工におけるインプロセス計測",,"機械技術","日刊工業新聞社","Vol. 58","No. 4","pp. 28-31",2010,Apr.
"清水一力,吉岡勇人,新野秀憲,澤野宏","振動伝達要素を最小化した完全非接触構造アクティブ除振ユニット","日本機械学会関東支部第49回学生員卒業研究発表講演会","日本機械学会関東支部第49回学生員卒業研究発表講演会講演前刷集",,,,"pp. 63-64",2010,Mar.
"Mamoru HAYASHI,Hiroshi SAWANO,Hayato YOSHIOKA,Hidenori SHINNO","Torque Error Compensation in Pneumatic Rotary Actuator System Using an Electromagnetic Force","The 5th International Conference on Leading Edge Manufacturing in 21st Century","Proceedings of the 5th International Conference on Leading Edge Manufacturing in 21st Century(LEM21)","The Japan Society of Mechanical Engineers(JSME)","Vol. 5",,"pp. 183-186",2009,Dec.
"Yugo KURIHASHI,Hiroshi SAWANO,Hayato YOSHIOKA,Hidenori SHINNO","A Newly Developed X-Y Planer Nano-Motion Table System with Large Travel Ranges","The 5th International Conference on Leading Edge Manufacturing in 21st Century","Proceedings of the 5th International Conference on Leading Edge Manufacturing in 21st Century(LEM21)","The Japan Society of Mechanical Engineers(JSME)","Vol. 5",,"pp. 187-190",2009,Dec.
"新野秀憲,吉岡勇人","原理・原則に基づき精緻を究める",,"東京工業大学同窓会誌・蔵前ジャーナル","社団法人 蔵前工業会",,"No. 1015","pp. 23-26",2009,Oct.
"Hidenori SHINNO,Hayato YOSHIOKA,Mamoru HAYASHI","A High Performance Tilting Platform Driven by Hybrid Actuator",,"CIRP(International Academy for Production Engineering) Annals-Manufacturing Technology","ELSEVIER","Vol. 58","No. 1","pp. 363-366",2009,Aug.
"Hayato YOSHIOKA,Mamoru HAYASHI,Hidenori SHINNO","Status Monitoring of Ultraprecision Machining Using Micro Thermo Sensor and AE Sensor",,"International Journal of Automation Technology","Fuji Technology Press Ltd","Vol. 3","No. 4","pp. 422-427",2009,July
"M.Takahashi,H.Yoshioka,H.Shinno","Ultraprecision Machining System for Fabricating Nano-Devices","the 9th International Conference of the euspen","Proceedings of the 9th International Conference of the euspen, June 2nd-5th, 2009, San Sebastian, Spain",,"Vol. 1",,"pp. 228-231",2009,June
"M.Hayashi,H.Yoshioka,H.Sawano,H.Shinno","High Torque and High Precision Rotary Table System Driven by Hybrid Actuator",,"Proceedings of the 9th International Conference of the euspen, June 2nd-5th, San Sebastian, Spain",,"Vol. 1",,"pp. 402-405",2009,June
"吉岡勇人","超精密加工機「ANGEL」の特徴と今後の展開",,"型技術","日刊工業新聞社","Vol. 24","No. 4","pp. 103-106",2009,Apr.
"新野秀憲,吉岡勇人","特集 未来技術 【超精密加工機“ANGEL”】",,"生産財マーケティング","ニュースダイジェスト社","Vol. 46","No. 1","p. A-37",2009,Apr.
"吉岡勇人","マイクロ温度センサを用いた超精密切削加工の適応制御",,"日本機械学会誌","日本機械学会","Vol. 112","No. 1083","p. 143",2009,Feb.
"Hayato YOSHIOKA,Mamoru HAYASHI,Hidenori SHINNO","Adaptive Control for Ultraprecision Machining Using an In-Process Micro Thermosensor","The 13th International Machine Tool Engineers' Conference, October 30th to November 4th, 2008","Proceedings of the 13th International Machine Tool Engineers' Conference","Japan Machine Tool Builders' Association",,,"pp. 106-107",2008,Nov.
"Hidenori SHINNO,Motohiro TAKAHASHI,Hayato YOSHIOKA","Vertical Nano-Positioning Stage with Noncontact Gravity Compensator","The 13th International Machine Tool Engineers' Conference","Proceedings of the 13th International Machine Tool Engineers' Conference, October 30th to November 4th, 2008","Japan Machine Tool Builders' Association",,,"pp. 64-65",2008,Nov.
"林遵,吉岡勇人,新野秀憲","ハイブリッドアクチュエータを用いた高トルク高精度回転機構の開発","第７回生産加工・工作機械部門講演会，日本機械学会","第７回日本機械学会生産加工・工作機械部門講演会論文集",,,"No. 08-19","pp. 207-208",2008,Nov.
"新野秀憲,吉岡勇人","超精密加工用非接触鉛直方向ナノ運動テーブルシステムの開発研究",,"工作機械技術振興財団第２８次試験研究報告書","財団法人 工作機械技術振興財団",,,"pp. 1-33",2008,Aug.
"吉岡勇人","研究室訪問 新たなシーズを求めて",,"機械設計","日刊工業新聞社","Vol. 52","No. 9","pp. 76-77",2008,July
"新野秀憲,吉岡勇人","超精密加工用リニアモータ駆動空気静圧XY平面運動テーブルシステム",,"日本機械学会C229 多軸工作機械における先進技術に関する研究分科会研究報告書","日本機械学会",,,"pp. 23-28",2008,June
"Motohiro TAKAHASHI,Hayato YOSHIOKA,Hidenori SHINNO","A Newly Developed Long-Stroke Vertical Nano-Motion Platform with Gravity Compensator",,"Journal of Advanced Mechanical Design, Systems, and Manufacturing","the Japan Society of Mechanical Engineers","Vol. 2","No. 3","pp. 356-365",2008,June
"Mamoru HAYASHI,Hayato YOSHIOKA,Hidenori SHINNO","An Adaptive Control of Ultraprecision Machining with an In-Process Micro-Sensor",,"Journal of Advanced Mechanical Design, Systems, and Manufacturing",,"Vol. 2","No. 3","pp. 322-331",2008,June
"高橋信彦,吉岡勇人,新野秀憲","集束イオンビームによる硬ぜい性材料のナノ加工に関する研究",,"精密工学会誌","精密工学会","Vol. 74","No. 5","pp. 491-497",2008,May
"Yoshioka, H.,Takahashi, M.,Shinno, H.","Vertical Nano-Positioning System for Precision Machine","10th Anniversary International Conference of the European society for Precision Engineering and Nanotechnology","Proceedings of 10th Anniversary International Conference of the Europan Society for Precision Engineering and Nanotechnology",,"Vol. 1",,"pp. 372-375",2008,May
"吉岡勇人","完全非接触XY平面位置決めテーブルを用いた微細加工",,"日本機械学会誌","日本機械学会","Vol. 111","No. 1071","p. 129",2008,Feb.
"Hayato Yoshioka,Toshimichi Gokan,Hidenori Shinno","Design and Nanomotion Control of a Noncontact Stage with Squeeze Bearings",,"International Journal of Automation Techonology","Fuji technology Press Ltd.","Vol. 2","No. 1","pp. 18-23",2008,Jan.
"新野秀憲,吉岡勇人","超精密加工機のハードウエア技術",,"機械の研究","養賢堂","Vol. 60","No. 1","pp. 67-72",2008,Jan.
"新野秀憲,吉岡勇人","油空圧機器と超精密加工技術―流体制御技術の適用による３次元ナノ加工の実現",,"油空圧技術","日本工業出版","Vol. 47","No. 1","pp. 1-6",2008,Jan.
"Mamoru HAYASHI,Hayato YOSHIOKA,Hidenori SHINNO","An Adaptive Control of Ultraprecision Machining with an In-Process Micro-Sensor","The 4th International Conference on Leading Edge Manufacturing in 21st Century(LEM21)","Proceedings of the 4th International Conference on Leading Edge Manufacturing in 21st Century(LEM21)","The Japan Society of Mechanical Engineers(JSME)","Vol. 07","No. 205","pp. 131-136",2007,Nov.
"Motohiro TAKAHASHI,Hayato YOSHIOKA,Hidenori SHINNO","Vertical Nano-Positioning System with Gravity Compensator","The 4th International conference on Leading Edge Manufacturing in 21st Century(LEM21)","Proceedings of the 4th International conference on Leading Edge Manufacturing in 21st Century(LEM21)","The Japan Society of Mechanical Engineers(JSME)","Vol. 07","No. 205","pp. 181-186",2007,Nov.
"Toshimichi GOKAN,Hayato YOSHIOKA,Hidenori SHINNO","A Newly Developed Compact Nano-Positioning Table System Using Squeeze Bearing","The 4th International conference on Leading Edge Manufacturing in 21st Century(LEM21)","Proceedings of the 4th International conference on Leading Edge Manufacturing in 21st Century(LEM21)","The Japan Society of Mechanical Engineers(JSME)","Vol. 07","No. 205","pp. 177-180",2007,Nov.
"Hidenori SHINNO,Hayato YOSHIOKA","A Newly Develped Linear Motor-Driven Aerostatic X-Y Planar Motion Table System for Nano-Machining",,"Annals of the CIRP(Annals of the International Academy for Production Engineering)","Elsevier Ltd.","Vol. 56","No. 1","pp. 369-372",2007,Aug.
"Noboru WATANABE,Hidenori SHINNO,Hayato YOSHIOKA","Development of a Novel Vertical CNC Multiple-Function Integrated Grinding Machine",,"Journal of Advanced Mechanical Design, Systems, and Manufacturing(JAMDSM)",,"Vol. 1","No. 3","pp. 328-337",2007,June
"Yoshioka, H.,Takahashi. M.,Gokan. T.,Shinno, H.","A newly developed linear motor-driven ultrasonic levitation nano-positioning table system","7th International Conference of the European Society for Precision Engineering and Nanotechnology (euspen)","Proceedings of the 7th euspen International Conference",,"Vol. II",,"pp. 145-148",2007,May
"吉岡勇人","今に花咲き実を結ぶ",,"月刊・生産財マーケティング","ニュースダイジェスト社","Vol. 44","No. 5","pp. A-62",2007,May
"新野秀憲,吉岡勇人","完全非接触超精密・微細加工システムの開発","日本機械学会講習会","日本機械学会講習会「最新空気圧機器技術の生産システムへの適用」","日本機械学会","Vol. 07","No. 11","pp. 19-24",2007,Mar.
"新野秀憲,吉岡勇人","超精密・微細加工を実現するためのフルードパワーシステム",,"日本フルードパワーシステム学会誌","社団法人 日本フルードパワーシステム学会","Vol. 38","No. 2","pp. 68-72",2007,Mar.
"吉岡勇人,小野幸村,新野秀憲","ナノ加工用XY位置決めテーブルシステム","第１２回国際工作機械技術者会議","第１２回国際工作機械技術者会議「工作機械関連のニューテクノロジ」ポスター展",,,,"pp. 54-55",2006,Nov.
"吉岡勇人,平林武洋,新野秀憲","ナノ加工用超精密スピンドルシステムの開発","第１２回国際工作機械技術者会議","第１２回国際工作機械技術者会議「工作機械関連のニューテクノロジー」ポスター展","日本工作機械工業会",,,"pp. 52-53",2006,Nov.
"有馬洋,吉岡勇人,新野秀憲","ベルト駆動X-Y精密位置決めテーブルシステム","日本機械学会第６回生産加工・工作機械部門講演会","日本機械学会第６回生産加工・工作機械部門講演会講演論文集",,"Vol. 06","No. 34","pp. 153-154",2006,Nov.
"後閑利通,吉岡勇人,新野秀憲","リニアモータ駆動超音波浮上テーブルシステムの開発","日本機械学会第６回生産加工・工作機械部門講演会","日本機械学会第６回生産加工・工作機械部門講演会講演論文集",,"Vol. 06","No. 34","pp. 151-152",2006,Nov.
"Hidenori SHINNO,Hayato YOSHIOKA,Sihar MARPAUNG","A Structured Method for Analysing Product Specification in Product Planning for Machine Tools",,"Journal of Engineering Design",,"Vol. 17","No. 4","pp. 347-356",2006,Aug.
"吉岡勇人,新野秀憲","ナノメートル平面運動テーブルの開発とその性能評価",,"日本機械学会RC216多軸制御工作機械とその利用技術に関する研究分科会研究報告書",,,,"pp. 71-74",2006,Aug.
"Hayato YOSHIOKA,Simpei MATSUMURA,Hitoshi HASHIZUME,Hidenori SHINNO","Minimizing Thermal Deformation of Aerostatic Spindle System by Temperature Control of Supply Air",,"JSME International Journal, Series C",,"Vol. 49","No. 2","pp. 606-611",2006,June
"Hidenori SHINNO,Hayato YOSHIOKA,Sihar Marpaung,Soichi HACHIGA","Quantitative SWOT Analysis on Global Competitiveness of Machine Tool Industry",,"Journal of Engineering Design",,"Vol. 17","No. 3","pp. 251-258",2006,June
"H.Yoshioka,K.Taniguchi,H.Shinno","A Novel Linear Motor Driven Aerostatic Planar Positioning Table System for Nano-Machining","The 6th International conference european society for precision engineering and nanotechnology(euspen)","Proceedings of the 6th International conference european society for precision engineering and nanotechnology",,"Vol. 1",,"pp. 305-308",2006,May
"吉岡勇人,新野秀憲","超音波振動を用いた非接触ナノ位置決めテーブルシステム",,"超音波TECHNO",,"Vol. 18","No. 3","pp. 48-51",2006,May
"H.Yoshioka,T.Hayakawa,H.Shinno","Analysis on Nano-machinability in Ultraprecision Machining of Brittle Materials","The 3rd International Conference on Leading Edge Manufacturing in 21th century","The Japan Society of Mechanical Engineers",,"Vol. 3",,"pp. 1133-1138",2005,Oct.
"松下幸生,吉岡勇人,橋詰等,新野秀憲","マイクロセンサ搭載工具によるナノ加工","山梨講演会","山梨講演会講演論文集",,,,"pp. 113-114",2005,Oct.
"H.Yoshioka,M.Okubo,H.Hashizume,H.Shinno","A Developed Ultraprecision Air Spindle System for Nano-machining","ASPE 20th Annual Meeting","Proceedings of the ASPE 2005 Annual Meeting",,"Vol. 37",,"pp. 126-129",2005,Oct.
"高橋信彦,吉岡勇人,新野秀憲","硬ぜい材料のイオンビーム加工における微細加工特性","山梨講演会","山梨講演会講演論文集",,,,"pp. 111-112",2005,Oct.
"谷口浩一,吉岡勇人,橋詰等,新野秀憲","超微細加工プロセス用完全非接触XY運動テーブルシステムの開発","2005年度精密工学会秋季大会","2005年度精密工学会秋季大会　講演論文集",,,,"pp. 43-44",2005,Sept.
"栗山健太朗,石上雄三,吉岡勇人,橋詰等,新野秀憲","コンパクト構造ナノ位置決めテーブルシステムの開発","2005年度精密工学会秋季大会","2005年度精密工学会秋季大会　講演論文集",,,,"pp. 873-874",2005,Sept.
"高橋宗大,吉岡勇人,橋詰等,新野秀憲","超音波振動を用いた非接触ナノ位置決めテーブルシステム","２００５年度精密工学会秋季大会学術講演会","２００５年度精密工学会秋季大会学術講演会講演論文集",,,,"pp. 859-860",2005,Sept.
"マルパウン・シハル,大久保麻友,吉岡勇人,橋詰等,新野秀憲","ナノ加工用熱変形抑制高速回転主軸の開発","2005年度精密工学会秋季大会","2005年度精密工学会秋季大会　講演論文集",,,,"pp. 31-32",2005,Sept.
"吉岡勇人,橋詰等,新野秀憲,進士忠彦,佐藤海二","ナノ加工システム用超精密XY位置決めテーブル",,"日本機械学会第５回生産加工・工作機械部門講演会講演論文集",,,"No. 04-3","pp. 103-104",2004,Nov.
"Yoshioka, H.,Komatsu, K.,Hashizume, H.,Shinno, H.,Shinshi, T.,Sato, K.","A Planar Nano-positioning Table System for Advanced Machine Tools",,"Proceedings of ASPE’s 19th Annual Meeting",,"Vol. 34",,"pp. 64-67",2004,Oct.
"橋詰等,小松航,吉岡勇人,新野秀憲,進士忠彦,佐藤海二","XYナノ位置決めテーブルシステム",,"日本機械学会2004年度年次大会講演論文集",,"Vol. 4","No. 04-1","pp. 63-64",2004,Sept.
"H.Shinno,H.Hashizume,H.Yoshioka,K.Komatsu,T.SHINSHI,K.SATO","X-Y-θ Nano-Positioning Table System for a Mother Machine",,"Annals of the CIRP",,"Vol. 53","No. 1","pp. 337-340",2004,Aug.
"吉岡勇人,松村晋平,橋詰等,新野秀憲","給気温度制御による空気静圧主軸の熱変形抑制",,"日本機械学会論文集(C編)",,"Vol. 70","No. 700","pp. 3605-3610",2004,
"H.Yoshioka,H.Hashizume,H.Shinno","In-process microsensor for ultraprecision machining",,"IEE Proceedings - Science, Measurement and Technology",,"Vol. 151","No. 2","pp. 121-125",2004,
"H.Shinno,H.Hashizume,H.Yoshioka,K.Komatsu,T.Shinshi,K.Sato","X-Y-θ Nano-Positioning Table System for a Mother Machine",,"Annals of the CIRP(Annals of the International Institution for Production Engineering Research)",,"Vol. 53","No. 1","pp. 337-340",2004,
"吉岡勇人,平間宣孝,橋詰等,新野秀憲","マイクロサーモパイルによる超精密切削加工の状態モニタリング",,"日本機械学会2004年度年次大会講演論文集",,"Vol. 4",,"pp. 297-298",2004,
"松村晋平,吉岡勇人,橋詰等,新野秀憲","給気温度制御による空気静圧主軸の熱変形抑制",,"2003年度精密工学会秋季大会学術講演会講演論文集",,,,"pp. 153",2003,
"下田寛,吉岡勇人,橋詰等,新野秀憲","ボイスコイルモータを用いた粗微動位置決め",,"2003年度精密工学会秋季大会学術講演会講演論文集",,,,"pp. 423",2003,
"H.Shinno,H.Hashizume,H.Yoshioka","Sensor-less Monitoring of Cutting Force during Ultraprecision Machining",,"Annals of the CIRP",,"Vol. 52","No. 1","pp. 303",2003,
"吉岡勇人","超精密切削加工の状態モニタリングに関する研究",,,,,,,2002,Dec.
"Hayato Yoshioka","An In-Process Micro-Sensor for Ultraprecision Machining",,"Proceedings of the 3rd euspen International Conference",,"Vol. 2",,"pp. 729-732",2002,