"Kazuya Mitsui,Kikuo Ikarashi,Keiichiro Sada","Elastic Critical Buckling Coefficients for Skew Plates of Steel Structures under Biaxial Normal Stress",,"Buildings","MDPI","Vol. 14","Issue 4","  901",2024,Apr.
"小橋 知季,三井 和也","多様な断面形状の薄板軽量形鋼組立材に対する弾性曲げ座屈耐力評価手法",,"日本建築学会構造系論文集","日本建築学会","Vol. 89","No. 817","pp. 342-353",2024,Mar.
"Kazuya Mitsui,Kikuo Ikarashi","Elastic critical local buckling load and behavior of local buckling for cold-formed lipped channel steel member under compression",,"Japan Architectural Review","WILEY","Vol. 7","Issue 1",,2024,Feb.
"Hideo Haikata,Kikuo Ikarashi,Kazuya Mitsui","INVESTIGATION ON BOLTED CONNECTION STRENGTH OF BRACE MEMBERS UNDER TENSILE FORCES","The 24th Korea-Japan-Taiwan Joint Seminar on Earthquake Engineering for Building Structures","SEEBUS 2023",,,,,2023,Dec.
"定 慶一郎,三井 和也,五十嵐 規矩夫","2方向圧縮力を受ける平行四辺形パネルウェブの弾性座屈耐力",,"鋼構造年次論文報告集","一般社団法人 日本鋼構造協会","Vol. 31",,"pp. 609-615",2023,Nov.
"松本 樹,三井 和也,五十嵐 規矩夫","高強度矩形断面部材の繰返し履歴挙動に及ぼす材料構成則の影響",,"鋼構造年次論文報告集","一般社団法人 日本鋼構造協会","Vol. 31",,"pp. 490-498",2023,Nov.
"三井 和也,松本 樹,五十嵐 規矩夫","繰返し載荷履歴が矩形中空断面部材の局部座屈を伴う劣化挙動に及ぼす影響",,"日本建築学会構造系論文集","日本建築学会","Vol. 88","No. 813","pp. 1569?1580",2023,Nov.
"松本 樹,三井 和也,五十嵐 規矩夫","様々な水平繰返し荷重を受ける矩形中空断面部材の耐力劣化挙動","第16回地震工学シンポジウム",,,"Vol. 16",,,2023,Nov.
"槇枝 諒祐,三井 和也,五十嵐 規矩夫","偏心圧縮力を受ける冷間成形リップ溝形断面部材の座屈挙動と最大耐力",,"鋼構造年次論文報告集","一般社団法人 日本鋼構造協会","Vol. 31",,"pp. 681-687",2023,Nov.
"森 光士郎,三井 和也,五十嵐 規矩夫","繰返し振幅がH形断面梁の崩壊形式に与える影響",,"鋼構造年次論文報告集","一般社団法人 日本鋼構造協会","Vol. 31",,"pp. 673-680",2023,Nov.
"Kazuma Nagasato,Kikuo Ikarashi,Kazuya Mitsui","Strength of bolted steel structural members under eccentric tension",,"Japan Architectural Review","WILEY","Vol. 6","Issue 1",,2023,Oct.
"Kazuya Mitsui,Kikuo Ikarashi,Tomoki Kobashi,Ryohei Kuwada","Elastic critical local buckling stress in cold-formed lipped channel and hat sections under uniform compression",,"Thin-Walled Structures","Elsevier","Vol. 191","No. 111064",,2023,Aug.
"槇枝 諒祐,三井 和也,五十嵐 規矩夫","偏心圧縮力を受ける冷間成形リップ溝形断面部材の座屈挙動と最大耐力","日本建築学会大会（近畿）","日本建築学会大会学術講演梗概集","日本建築学会","Vol. C-?","No. 22571","pp. 1141-1142",2023,July
"小橋 知季,三井 和也,桑田 涼平,五十嵐 規矩夫","軸圧縮が作用するリップ溝形鋼におけるリップの座屈係数の評価式","日本建築学会大会（近畿）","日本建築学会大会学術講演梗概集","日本建築学会","Vol. C-?","No. 22568","pp. 1135-1136",2023,July
"拝形 英郎,五十嵐 規矩夫,三井 和也","有限要素法による引張力を受ける山形断面ボルト接合部耐力の検討","日本建築学会大会（近畿）","日本建築学会大会学術講演梗概集","日本建築学会","Vol. C-?","No. 22567","pp. 1133-1134",2023,July
"三井 和也,五十嵐 規矩夫,拝形 英郎,桑田 涼平,小橋 知季","薄板軽量形鋼ドリルねじ接合部の一面せん断実験","日本建築学会大会（近畿）","日本建築学会大会学術講演梗概集","日本建築学会","Vol. C-?","No. 22522","pp. 1043-1044",2023,July
"桑田 涼平,小橋 知季,五十嵐 規矩夫,三井 和也,拝形 英郎","曲げせん断を受けるドリルねじの力学的性能に関する研究","日本建築学会大会（近畿）","日本建築学会大会学術講演梗概集","日本建築学会","Vol. C-?","No. 22521","pp. 1041-1042",2023,July
"定 慶一郎,松本 樹,三井 和也,五十嵐 規矩夫","箱形断面部材の座屈を伴う変形挙動の解析精度に及ぼす材料構成則とその定数による影響","日本建築学会大会（近畿）","日本建築学会大会学術講演梗概集","日本建築学会","Vol. C-?","No. 22423","pp. 845-846",2023,July
"松本 樹,三井 和也,五十嵐 規矩夫","高強度鋼材の素材繰返し試験結果を用いた材料構成則の定数同定","日本建築学会大会（近畿）","日本建築学会大会学術講演梗概集","日本建築学会","Vol. C-?","No. 22422","pp. 843-844",2023,July
"森 光士郎,五十嵐 規矩夫,三井 和也,木村 征也,内田 護,二階堂 雅人,桑田 涼平","定変位繰返し振幅がH 形断面梁の崩壊形式に及ぼす影響","日本建築学会大会（近畿）","日本建築学会大会学術講演梗概集","日本建築学会","Vol. C-?","No. 22386","pp. 771-772",2023,July
"五十嵐 規矩夫,中野 友貴,三井 和也","端モーメントと等分布荷重を受ける上フランジ拘束H 形断面梁の塑性変形能力","日本建築学会大会（近畿）","日本建築学会大会学術講演梗概集","日本建築学会","Vol. C-?","No. 22375","pp. 749-750",2023,July
"中野 友貴,五十嵐 規矩夫,三井 和也","端モーメントと等分布荷重を受ける上フランジ拘束H 形断面梁の弾性座屈","日本建築学会大会（近畿）","日本建築学会大会学術講演梗概集","日本建築学会","Vol. C-?","No. 22374","pp. 747-748",2023,July
"中野友貴,三井和也,五十嵐 規矩夫","端モーメントと等分布荷重が作用するＨ形断面梁ウェブの弾性局部座屈耐力",,"日本建築学会構造系論文集",,"Vol. 88","No. 806","pp. 687-698",2023,Apr.
"Kazuya Mitsui,Atsushi Sato,Kikuo Ikarashi","Required number of self-drilling screws for built-up column comprising cold-formed lipped channel sections to ensure flexural buckling as a single unit member",,"Japan Architectural Review",,"Vol. 6","Issue 1",,2023,Apr.
"Kazuya Mitsui,Ryohei Kuwada","Elastic coupled local buckling strength of I-shaped steel member in uniform bending",,"Japan Architectural Review",,"Vol. 6","Issue 1",,2023,Apr.
"五十嵐 規矩夫,三井 和也,影澤 泰人,木村 征也,内田 護,平井 健太,?田 武之,伊藤 冬樹","Ｈ形断面梁の塑性変形性能に及ぼす上フランジ連続拘束条件の影響",,"日本建築学会構造系論文集","日本建築学会","Vol. 88","No. 805","pp. 519-530",2023,Mar.
"Hideo Haikata,Kikuo Ikarashi,Kazuya Mitsui","Effect of Assembly Types on Bolted Connection Strength Consist of Built-up Angle Members under Monotonic Tensile Force","The 23nd Taiwan - Korea - Japan Joint Seminar on Earthquake Engineering for Building Structures SEEBUS2022",,,,,,2022,Dec.
"Itsuki Matsumoto,Kazuya Mitsui,Kikuo Ikarashi","Effect of Loading Protocol on Hysteretic Response and Stiffness Deterioration of Steel Hollow Structural Section Columns","The 23nd Taiwan - Korea - Japan Joint Seminar on Earthquake Engineering for Building Structures SEEBUS2022",,,,,,2022,Dec.
"拝形英郎,五十嵐規矩夫,三井和也","引張力を受ける山形断面組立材のボルト接合部耐力",,"鋼構造年次論文報告集",,"Vol. 30",,"pp. 489-496",2022,Nov.
"荒谷 智将,三井 和也,五十嵐 規矩夫","せん断力を受ける平行四辺形接合部のパネルウェブの弾性座屈",,"鋼構造年次論文報告集",,"Vol. 30",,"pp. 482-488",2022,Nov.
"Tomoki Nakano,Kikuo Ikarashi,Kazuya Mitsui","Elastic Local Buckling Strength of Wide Flange Beams Web Subjected to End Moment and Distributed Load",,"The 2022 edition of the International Colloquium on Stability and Ductility of Steel Structures (SDSS 2022)",,,,"pp. 958-964",2022,Sept.
"Kazuya Mitsui,Kikuo Ikarashi","Elastic Shear Buckling Coefficients for Oblique Plates",,"Mathematical Problems in Engineering","Hindawi","Vol. 2022",,,2022,Sept.
"光廣 日向子,五十嵐規矩夫,三井 和也,小橋 知季,桑田 涼平","圧縮力を受ける冷間成形リップ溝形断面部材の弾性座屈耐力に及ぼす端部境界条件の影響","日本建築学会大会（北海道）","日本建築学会大会学術講演梗概集","一般社団法人 日本建築学会",,,"pp. 731-732",2022,July
"拝形 英郎,五十嵐 規矩夫,三井 和也","引張力を受ける山形断面組立材のボルト接合部耐力に及ぼすつづり形式の影響","日本建築学会大会（北海道）","日本建築学会大会学術講演梗概集","一般社団法人 日本建築学会",,,"pp. 721-722",2022,July
"影澤 泰人,五十嵐 規矩夫,三井 和也,木村 征也,内田 衞,平井 健太,?田 武之,伊藤 冬樹","上フランジに対する連続拘束条件がＨ形断面梁の塑性変形性能に及ぼす影響","日本建築学会大会（北海道）","日本建築学会大会学術講演梗概集","一般社団法人 日本建築学会",,,"pp. 679-680",2022,July
"三井 和也,五十嵐 規矩夫","強軸周りの一様曲げを受ける溝形断面部材の弾性座屈耐力","日本建築学会大会（北海道）","日本建築学会大会学術講演梗概集","一般社団法人 日本建築学会",,,"pp. 655-656",2022,July
"中野 友貴,五十嵐 規矩夫,三井 和也","端部曲げと等分布荷重による曲げを受ける H 形断面梁ウェブの弾性局部座屈耐力","日本建築学会大会（北海道）","日本建築学会大会学術講演梗概集","一般社団法人 日本建築学会",,,"pp. 653-654",2022,July
"林 健仁,三井 和也,五十嵐 規矩夫","高強度鋼を用いた溶接組立箱形断面部材の繰返し履歴性状","日本建築学会大会（北海道）","日本建築学会大会学術講演梗概集","一般社団法人 日本建築学会",,,"pp. 1139-1140",2022,July
"荒谷 智将,三井 和也,五十嵐 規矩夫","せん断力を受ける平行四辺形パネルウェブの弾性せん断座屈耐力","日本建築学会大会（北海道）","日本建築学会大会学術講演梗概集","一般社団法人 日本建築学会",,,"pp. 929-930",2022,July
"福田 拓人,三井 和也,五十嵐 規矩夫","水平スチフナにより梁両部材端を部分的に補剛した H 形断面梁の弾性横座屈耐力","日本建築学会大会（北海道）","日本建築学会大会学術講演梗概集","一般社団法人 日本建築学会",,,"pp. 703-704",2022,July
"桑田 涼平,五十嵐規矩夫,三井 和也,小橋 知季,光廣 日向子","圧縮力を受ける冷間成形リップ溝形断面部材の端部境界条件を考慮した最大耐力評価","日本建築学会大会（北海道）","日本建築学会大会学術講演梗概集","一般社団法人 日本建築学会",,,"pp. 735-736",2022,July
"大畑 朋也,五十嵐規矩夫,光廣 日向子,三井 和也,小橋 知季,桑田 涼平","圧縮力を受ける冷間成形リップ溝形断面部材の最大耐力と崩壊形式","日本建築学会大会（北海道）","日本建築学会大会学術講演梗概集","一般社団法人 日本建築学会",,,"pp. 733-734",2022,July
"三井和也,五十嵐規矩夫,小橋知季,桑田涼平","圧縮力が作用する冷間成形溝形断面部材の弾性ゆがみ座屈耐力と座屈挙動",,"日本建築学会構造系論文集",,"Vol. 87","No. 791","pp. 139-148",2022,Jan.
"三井和也,五十嵐規矩夫","圧縮力が作用する冷間成形溝形断面部材の弾性局部座屈耐力と座屈挙動",,"日本建築学会構造系論文集",,"Vol. 86","No. 790","pp. 1685 - 1692",2021,Dec.
"三井和也,五十嵐規矩夫,小橋知季,桑田涼平","薄板軽量形鋼溝形断面部材のゆがみ座屈耐力に関する一考察","鋼構造シンポジウム2021 第29回鋼構造年次論文（報告）発表会","鋼構造年次論文報告集",,"Vol. 29",,"pp. 308-317",2021,Nov.
"福田拓人,五十嵐規矩夫,三井和也","スチフナ付H形断面鉛直ハンチ梁の塑性変形能力","鋼構造シンポジウム2021 第29回鋼構造年次論文（報告）発表会","鋼構造年次論文報告集",,"Vol. 29",,"pp. 334-340",2021,Nov.
"中野友貴,五十嵐規矩夫,三井和也","曲げと等分布荷重を受けるH形断面梁ウェブの弾性局部座屈性状","鋼構造シンポジウム2021 第29回鋼構造年次論文（報告）発表会","鋼構造年次論文報告集",,"Vol. 29",,"pp. 384-392",2021,Nov.
"永里和真,五十嵐規矩夫,三井和也","引張力を受ける偏心接合された薄板鋼構造部材のボルト接合部耐力",,"日本建築学会構造系論文集",,"Vol. 86","No. 789","pp. 1570 - 1580",2021,Nov.
"Kazuya Mitsui,Kikuo Ikarashi,Tomoki Kobashi,Ryohei Kuwada","Distortional Buckling of Cold-Formed Channel Member under Compression",,"Proceedings of the 22nd Taiwan-Japan-Korea Joint Seminar on Earthquake Engineering for Building Structures",,,,"pp. 126 - 135",2021,Oct.
"Hinako Mitsuhiro,Kikuo Ikarashi,Kazuya Mitsui","Buckling Strength Evaluation Method of Plate on Elastic Foundation and Its Application to Sandwich Panels","SEEBUS 2021","Proceedings of the 22nd Taiwan-Japan-Korea Joint Seminar on Earthquake Engineering for Building Structures",,,,"pp. 33 - 40",2021,Oct.
"Hiroto Kagesawa,Kikuo Ikarashi,Kazuya Mitsui","Buckling Strength and Buckling Behavior of I-Shaped Beams with Continuous Lateral Restraints on Upper Flange","SEEBUS 2021","Proceedings of the 22nd Taiwan-Japan-Korea Joint Seminar on Earthquake Engineering for Building Structures",,,,"pp. 26 - 32",2021,Oct.
"Tomoki Nakano,Kikuo Ikarashi,Kazuya Mitsui","Theoretical Analysis of Elastic Local Buckling for H-Shaped Beams Subjected to End Moments and Uniformly Distributed Load","SEEBUS 2021","Proceedings of the 22nd Taiwan-Japan-Korea Joint Seminar on Earthquake Engineering for Building Structures",,,,"pp. 145 - 154",2021,Oct.
"三井和也,桑田涼平","一様曲げを受けるH形断面部材の弾性連成局部座屈耐力",,"日本建築学会構造系論文集",,"Vol. 86","No. 787","pp. 1369-1379",2021,Sept.
"影澤泰人,五十嵐規矩夫,三井和也,木村征也,内田衛,平井健太,高田武之,伊藤冬樹","上フランジを連続完全拘束されたH形断面梁の塑性変形性能評価","日本建築学会大会（東海）","日本建築学会大会学術講演梗概集",,,,"pp. 889 - 890",2021,July
"An Tongheng,Ikarashi Kikuo,Mitsui Kazuya","Lateral Buckling Strength and Deformation Capacity of H-Shaped Tapered Beams with Restraint","日本建築学会大会（東海）","日本建築学会大会学術講演梗概集",,,,"pp. 881 - 882",2021,July
"中野友貴,五十嵐規矩夫,三井和也","端モーメントおよび等分布荷重を受けるH形断面梁ウェブの弾性局部座屈性状","日本建築学会大会（東海）","日本建築学会大会学術講演梗概集",,,,"pp. 867 - 868",2021,July
"五十嵐規矩夫,八馬秀,三井和也","軸力と曲げせん断力を受ける閉断面部材の幅厚比制限値","日本建築学会大会（東海）","日本建築学会大会学術講演梗概集",,,,"pp. 821 - 822",2021,July
"八馬秀,五十嵐規矩夫,三井和也","軸力と曲げせん断力を受ける円形中空断面部材の弾性局部座屈耐力と塑性変形性能",,"日本建築学会大会学術講演梗概集",,,,"pp. 819 - 820",2021,July
"三井和也,五十嵐規矩夫,小橋知季,桑田涼平","圧縮力が作用する薄板軽量形鋼のゆがみ座屈耐力に関する研究","日本建築学会大会（東海）","日本建築学会大会学術講演梗概集",,,,"pp. 799 - 800",2021,July
"渡辺茜,五十嵐規矩夫,三井和也,小橋知季","圧縮力を受けるリップ溝形断面部材の座屈性状に及ぼす幾何学的初期不整の影響","日本建築学会大会（東海）","日本建築学会大会学術講演梗概集",,,,"pp. 797 - 798",2021,July
"永里和真,五十嵐規矩夫,三井和也,川端洋介","引張力を受ける偏心接合された薄板鋼構造部材のボルト接合部耐力","日本建築学会大会（東海）","日本建築学会大会学術講演梗概集",,,,"pp. 795 - 796",2021,July
"光廣日向子,五十嵐規矩夫,三井和也,小橋知季,桑田涼平","薄板軽量形溝形断面部材の許容応力度設計法に関する一検討","日本建築学会大会（東海）","日本建築学会大会学術講演梗概集",,,,"pp. 1077 - 1078",2021,July
"福田拓人,五十嵐規矩夫,三井和也","曲げせん断力を受けるスチフナ付きH形断面鉛直ハンチ梁の塑性変形能力","日本建築学会大会（東海）","日本建築学会大会学術講演梗概集",,,,"pp. 907 - 908",2021,July
"三井和也,佐藤篤司,五十嵐 規矩夫","薄板軽量形鋼組立圧縮材が一体で曲げ座屈するための必要ドリルねじ本数",,"日本建築学会構造系論文集",,"Vol. 86","No. 784","pp. 979-990",2021,June
"三井 和也,桑田 涼平","圧縮力を受けるH形断面部材の連成局部座屈耐力",,"日本建築学会構造系論文集",,"Vol. 86","No. 782","pp. 619 - 629",2021,Apr.
"三井和也,渡辺茜,小橋知季,五十嵐規矩夫","圧縮力が作用する冷間成形リップ付溝形断面部材の数値解析結果に幾何学的初期不整が及ぼす影響",,"日本建築学会構造系論文集",,"Vol. 86","No. 779","pp. 157-167",2021,Jan.
"石田渉,五十嵐規矩夫,三井和也","曲げせん断力を受けるH形断面鉛直ハンチ梁の局部座屈耐力",,"日本建築学会構造系論文集","日本建築学会","Vol. 85","No. 778","pp. 1655-1665",2020,Dec.
"光廣日向子,五十嵐規矩夫,三井和也","弾性支持平板の座屈耐力算定法のサンドイッチパネルへの適用",,"鋼構造年次論文報告集","日本鋼構造協会","Vol. 28",,"pp. 895 - 901",2020,Nov.
"井川直大,五十嵐規矩夫,三井和也","中間スチフナで補剛された上フランジ連続拘束梁の座屈性状と補剛位置決定法",,"日本建築学会構造系論文集",,"Vol. 85","No. 777","pp. 1491 - 1500",2020,Nov.
"影澤泰人,五十嵐規矩夫,三井和也,内田衞,伊藤冬樹","上フランジ拘束したH形断面梁の座屈性状に及ぼす横補剛材の影響",,"鋼構造年次論文報告集","日本鋼構造協会","Vol. 28",,"pp. 786-793",2020,Nov.
"渡辺茜,三井和也,五十嵐規矩夫,小橋知季","軸圧縮される薄板軽量リップ溝形鋼の座屈性状に関する実験的検討","日本建築学会大会（関東）","日本建築学会大会学術講演梗概集（関東）",,,,"pp. 879-880",2020,Sept.
"永里和真,五十嵐規矩夫,三井和也,川端洋介","有限要素法による山形鋼ボルト接合部耐力の検討","日本建築学会大会（関東）","日本建築学会大会学術講演梗概集（関東）",,,,"pp. 687-688",2020,Sept.
"光廣日向子,五十嵐規矩夫,三井和也","応力勾配を有する軸方向力下にある弾性支持平板の座屈性状とその応用","日本建築学会大会（関東）","日本建築学会大会学術講演梗概集（関東）",,,,"pp. 1007-1008",2020,Sept.
"八馬秀,五十嵐規矩夫,三井和也","せん断曲げを受ける円形断面部材の局部座屈耐力と塑性変形性能","日本建築学会大会（関東）","日本建築学会大会学術講演梗概集（関東）",,,,"pp. 979-980",2020,Sept.
"井川直大,五十嵐規矩夫,三井和也","上フランジ連続完全拘束Ｈ形断面梁の弾性横座屈耐力に及ぼす中間スチフナ補剛の影響","日本建築学会大会（関東）","日本建築学会大会学術講演梗概集（関東）",,,,"pp. 945-946",2020,Sept.
"影澤泰人,五十嵐規矩夫,三井和也,木村征也,内田衞,平井健太,?田武之,伊藤冬樹","上フランジを水平連続拘束されたH形断面梁の座屈性状に及ぼす横補剛材の影響","日本建築学会大会（関東）","日本建築学会大会学術講演梗概集（関東）",,,,"pp. 943-944",2020,Sept.
"石田渉,五十嵐規矩夫,三井和也","曲げせん断力を受けるH形断面鉛直ハンチ梁の最大耐力と塑性変形能力","日本建築学会大会（関東）","日本建築学会大会学術講演梗概集（関東）",,,,"pp. 941-942",2020,Sept.
"五十嵐規矩夫,石田渉,三井和也","曲け?せん断力を受けるH形断面鉛直ハンチ梁のウェフ?内梁せい方向直応力度分布","日本建築学会大会（関東）","日本建築学会大会学術講演梗概集（関東）",,,,"pp. 939-940",2020,Sept.
"Tongheng An,KIKUO IKARASHI,Kazuya Mitsui","Lateral Buckling Strength of H-Shaped Tapered Beam under Shear Bending","日本建築学会大会（関東）","日本建築学会大会学術講演梗概集（関東）",,,,"pp. 927-928",2020,Sept.
"三井和也,渡辺茜,五十嵐規矩夫,小橋知季","軸圧縮される薄板軽量リップ溝形鋼の座屈性状に与える形状初期不整の影響","日本建築学会大会（関東）","日本建築学会大会学術講演梗概集（関東）",,,,"pp. 881-882",2020,Sept.
"五十嵐規矩夫,宇津木優一,三井和也,牧野勇太,山田薫","H形断面柱梁L形接合部パネルの終局耐力算定法",,"日本建築学会構造系論文集",,,,"pp. 1079-1089",2020,Aug.
"五十嵐規矩夫,井川直大,柳下義博,三井和也","水平スチフナにより補剛されたウェブの座屈性状および水平スチフナの設計法",,"日本建築学会構造系論文集",,"Vol. 85","No. 773","pp. 957 - 967",2020,July
"五十嵐規矩夫,宇津木優一,三井和也","H形断面柱梁L形接合部パネルの弾性せん断座屈耐力",,"日本建築学会構造系論文集",,"Vol. 85","No. 771","pp. 759 - 769",2020,May
"村田佳優,青柳智,吉敷祥一,川畑友弥,中込忠男,下川弘海,石井匠,一戸康生,三井和也,下川弘海,石井匠,一戸康生","梁端接合部におけるスケール効果検証実験 その3 人工溶接欠陥のスケール効果","日本建築学会大会（北陸）","日本建築学会大会学術講演梗概集","日本建築学会","  C-III",,"pp. 853 - 854",2019,Sept.
"Atsushi Sato,Masahiro Aoyama,Kenta Inden,Kazuya Mitsui","Design limitations for the steel beam-column to ensure full plastic moment","THE INTERNATIONAL COLLOQUIUM ON STABILITY AND DUCTILITY OF STEEL STRUCTURES SDSS 2019","THE INTERNATIONAL COLLOQUIUM ON STABILITY AND DUCTILITY OF STEEL STRUCTURES SDSS 2019","Architectural Institute of Japan",,,"pp. 963 - 971",2019,Sept.
"青柳智,村田佳優,吉敷祥一,川畑友弥,中込忠男,三井和也,下川弘海,石井匠,一戸康生","梁端接合部におけるスケール効果検証実験 その2 部材寸法のスケール効果","日本建築学会大会（北陸）","日本建築学会大会学術講演梗概集","日本建築学会","  C-III",,"pp. 851 - 852",2019,Sept.
"Kazuya Mitsui,Atsushi Sato","Flexural Buckling Strength of Steel Angle Member with Eccentric Joint","ELECTRICAL TRANSMISSION & SUBSTATION STRUCTURES CONFERENCE 2018",,,,,,2018,Nov.
"位田健太,佐藤篤司,三井和也","圧縮軸力と曲げモーメントを受ける角形鋼管柱に関する研究 その6 一連の実験結果と現行指針式の比較","日本建築学会大会（東北）","日本建築学会大会学術講演梗概集","日本建築学会","  C-III",,"pp. 987 - 988",2018,Sept.
"三井和也,佐藤篤司,位田健太","圧縮軸力と曲げモーメントを受ける角形鋼管柱に関する研究 その5 材端曲げモーメント比を0.5とした単調複曲率曲げ実験","日本建築学会大会（東北）","日本建築学会大会学術講演梗概集","日本建築学会","  C-III",,"pp. 985 - 986",2018,Sept.
"佐藤篤司,位田健太,三井和也","軸方向圧縮力と曲げモーメントを受ける角形鋼管柱の構造性能評価",,"日本建築学会構造系論文集","日本建築学会","Vol. 83","No. 751","pp. 1365 - 1372",2018,Sept.
"佐藤篤司,位田健太,三井和也","軸方向圧縮力と単調複曲率曲げモーメントを受ける角形鋼管柱の実験的研究 材端曲げモーメント比を0.5とした場合",,"日本建築学会構造系論文集","日本建築学会","Vol. 83","No. 747","pp. 739 - 749",2018,May
"位田健太,佐藤篤司,三井和也","軸方向圧縮力と単調複曲率曲げモーメントを受ける角形鋼管柱の弾塑性挙動 材端曲げモーメント比を0.5 とした場合","日本建築学会東海支部研究集会","日本建築学会東海支部研究報告集","日本建築学会","Vol. 56",,"pp. 257 - 260",2018,Feb.
"Kazuya Mitsui,Massimo Latour,Gianvittorio Rizzano,Atsushi Sato,Vincenzo Piluso","EXPERIMENTAL AND NUMERICAL ANALYSIS OF THE ULTIMATE BEHAVIOUR OF SQUARE HOLLOW SECTIONS UNDER COMBINED AXIAL AND BENDING LOADS",,"Ingegneria Sismica International Journal of Earthquake Engineering",,,,"pp. 5 - 22",2018,Jan.
"佐藤篤司,三井和也,青山雅弘,位田健太","初期不整が軸方向圧縮力と単調逆対称モーメントを受ける角形鋼管柱の弾塑性挙動に与える影響",,"日本建築学会構造系論文集","日本建築学会","Vol. 82","No. 741","pp. 1787 - 1797",2017,Nov.
"Kazuya Mitsui,Atsushi Sato,Masahiro Aoyama","EFFECT OF INITIAL IMPERFECTION ON ELASTO - PLASTIC BEHAVIOR OF SHS COLUMNS UNDER AXIAL FORCE WITH BENDING MOMENT","EURO STEEL 2017 8th European Conference on Steel and Composite Structures","EURO STEEL 2017 8th European Conference on Steel and Composite Structures",,,,,2017,Sept.
"Kazuya Mitsui,Massimo Latour,Gianvittorio Rizzano,Atsushi Sato,Vincenzo Piluso","EXPERIMENTAL ANALYSIS AND FE MODELING OF SQUARE HOLLOW SECTIONS UNDER COMBINED AXIAL AND BENDING LOADS","EURO STEEL 2017 8th European Conference on Steel and Composite Structures","EURO STEEL 2017 8th European Conference on Steel and Composite Structures",,,,,2017,Sept.
"Masahiro Aoyama,Kazuya Mitsui,Atsushi Sato","EXPERIMENTA STUDY ON SQUARE STEEL TUBULAR COLUMNS, Under Compressive Axial Force with Monotonic Antisymmetric Bending Momnet","EURO STEEL 2017 8th European Conference on Steel and Composite Structures","EURO STEEL 2017 8th European Conference on Steel and Composite Structures",,,,,2017,Sept.
"位田健太,三井和也,佐藤篤司","圧縮軸力と曲げモーメントを受ける角形鋼管柱に関する研究 その4 単調逆対称曲げ実験","日本建築学会大会（中国）","日本建築学会大会学術講演梗概集","日本建築学会","  C-III",,"pp. 1085 - 1086",2017,Aug.
"三井和也,佐藤篤司,位田健太","圧縮軸力と曲げモーメントを受ける角形鋼管柱に関する研究 その3 繰返し一端曲げ実験","日本建築学会大会（中国）","日本建築学会大会学術講演梗概集","日本建築学会","  C-III",,"pp. 1083 - 1084",2017,Aug.
"佐藤篤司,三井和也,青山雅弘","初期不整が軸方向圧縮力と一端単調曲げモーメントを受ける角形鋼管柱の弾塑性挙動に与える影響",,,"日本建築学会","Vol. 82","No. 736","pp. 929 - 939",2017,June
"Kazuya Mitsui,Atsushi Sato","FLEXURAL ELASTIC BUCKLING STRESS OF BATTEN TYPE LIGHT GAUGE BUILT - UP MEMBER",,"CIVIL AND ENVIROMENTAL ENGENEERING REPORTS",,,"Number 25","pp. 161 - 172",2017,June
"佐藤篤司,三井和也","軸方向圧縮力と繰返し一端曲げモーメントを受ける角形鋼管柱の実験的研究",,"日本建築学会構造系論文集","日本建築学会","Vol. 82","No. 735","pp. 701 - 711",2017,May
"佐藤篤司,三井和也","軸方向圧縮力と単調逆対称曲げモーメントを受ける角形鋼管柱の実験的研究",,"日本建築学会構造系論文集","日本建築学会","Vol. 82","No. 732","pp. 267 - 277",2017,Feb.
"三井和也,佐藤篤司","初期不整が一定軸力下で一端単調曲げモーメントを受ける角形鋼管柱の弾塑性挙動に与える影響","日本建築学会東海支部研究集会","日本建築学会東海支部研究報告集","日本建築学会","Vol. 55",,"pp. 129 - 132",2017,Feb.
"三井和也,佐藤篤司","一定軸力下で単調逆対称曲げモーメントを受ける角形鋼管柱の弾塑性挙動","日本建築学会東海支部研究集会","日本建築学会東海支部研究報告集","日本建築学会","Vol. 55",,"pp. 125 - 128",2017,Feb.
"三井和也,佐藤篤司","一定軸力下で繰返し一端曲げモーメントを受ける角形鋼管柱の弾塑性挙動","日本建築学会東海支部研究集会","日本建築学会東海支部研究報告集","日本建築学会","Vol. 55",,"pp. 121 - 124",2017,Feb.
"佐藤篤司,三井和也","軸方向圧縮力と一端単調曲げモーメントを受ける角形鋼管柱の実験的研究",,"日本建築学会構造系論文集",,"Vol. 81","No. 729","pp. 1933 - 1943",2016,Nov.
"Kazuya Mitsui,Atsushi Sato","Modified Effective Slenderness Ratio for Light Gauge Built - up Member","7th International Conference on Coupled Instabilities in Metal Structures","7th International Conference on Coupled Instabilities in Metal Structures",,,"No. 16","pp. 1 - 18",2016,Nov.
"三井和也,佐藤篤司","圧縮軸力と曲げモーメントを受ける角形鋼管柱に関する研究 その2 実験結果の考察","日本建築学会大会（九州）","日本建築学会大会学術講演梗概集","日本建築学会",,,"pp. 1013 - 1014",2016,Aug.
"佐藤篤司,三井和也,小野徹郎","偏心継手を有する山形鋼部材の曲げ座屈実験",,"日本建築学会構造系論文集","日本建築学会","Vol. 81","No. 726","pp. 1343 - 1353",2016,Aug.
"山田風人,三井和也,佐藤篤司","圧縮軸力と曲げモーメントを受ける角形鋼管柱に関する研究 その1 一端単調曲げ実験","日本建築学会大会（九州）","日本建築学会大会学術講演梗概集","日本建築学会",,,"pp. 1011 - 1012",2016,Aug.
"Kazuya Mitsui,Atsushi Sato,Hisayuki Okada,Tetsuro Ono","FLEXURAL ELASTIC BUCKLING STRESS OF LIGHT GAUGE BUILT - UP MEMBER","XIII INTERNATIONAL CONFERENCE ON METAL STRUCTURES","XIII INTERNATIONAL CONFERENCE ON METAL STRUCTURES",,,,"pp. 83 - 91",2016,June
"Atsushi Sato,Kazuya Mitsui","THE EFFECT OF STEEL PROPERTIES ON DEFORMATION CAPACITY OF HSS COLUMNS","XIII INTERNATIONAL CONFERENCE ON METAL STRUCTURES","XIII INTERNATIONAL CONFERENCE ON METAL STRUCTURES",,,,"pp. 223 - 230",2016,June
"Kazuya Mitsui,Atsushi Sato","STUDY ON DEFORMATION CAPACITY OF SQUARE STEEL TUBULAR COLUMNS","THE INTERNATIONAL COLLOQUIUM ON STABILITY AND DUCTILITY OF STEEL STRUCTURES SDSS 2016","THE INTERNATIONAL COLLOQUIUM ON STABILITY AND DUCTILITY OF STEEL STRUCTURES SDSS 2016",,,,"pp. 973 - 980",2016,May
"三井和也,佐藤篤司","一定軸力下で曲げモーメントを受ける角形鋼管柱の塑性変形能力に関する実験的研究",,"構造工学論文集","日本建築学会","Vol. 62B",,"pp. 433 - 440",2016,Mar.
"三井和也,佐藤篤司,小野徹郎","一定軸力下で曲げを受ける角形鋼管柱の弾塑性挙動","日本建築学会東海支部研究集会","日本建築学会東海支部研究報告集","日本建築学会","Vol. 54",,"pp. 221 - 224",2016,Feb.
"Kazuya Mitsui,Atsushi Sato,Hisayuki Okada,Tetsuro Ono","MODIFIED EFFECTIVE SLENDERNESS RATIO FOR LIGHT GAUGE BUILT - UP COMPRESSION MEMBER","The 17th Taiwan - Korea - Japan Joint Seminar on Earthquake Engineering for Building Structures","The 17th Taiwan - Korea - Japan Joint Seminar on Earthquake Engineering for Building Structures",,,,"pp. 121 - 131",2015,Sept.
"三井和也,佐藤篤司","一定軸力下で曲げを受ける角形鋼管の塑性変形能力 : その1 鋼材特性が塑性変形能力に与える影響","日本建築学会大会（関東）","日本建築学会大会学術講演梗概集","日本建築学会",,,"pp. 929 - 930",2015,Sept.
"佐藤篤司,三井和也,岡田久志,小野徹郎","帯板形式薄板軽量形鋼組立圧縮材の弾性曲げ座屈応力度 組立圧縮材の修正有効細長比 その1",,"日本建築学会構造系論文集","日本建築学会","Vol. 80","No. 714","pp. 1307 - 1317",2015,Aug.
"三井和也,佐藤篤司,小野徹郎","一定軸力下で曲げを受ける角形鋼管柱の塑性変形能力 : その1 鋼材特性が塑性変形能力に与える影響","日本建築学会東海支部研究集会","日本建築学会東海支部研究報告集","日本建築学会","Vol. 53",,"pp. 205 - 208",2015,Feb.
"三井和也,佐藤篤司,小野徹郎","一定軸力下で曲げを受ける角形鋼管柱の塑性変形能力 : その2 鋼材特性による塑性変形能力の評価","日本建築学会東海支部研究集会","日本建築学会東海支部研究報告集","日本建築学会","Vol. 53",,"pp. 209 - 212",2015,Feb.
"佐藤篤司,三井和也,岡田久志,小野徹郎","薄板軽量形鋼組立圧縮材の曲げ座屈耐力に関する研究 : その4 有効細長比の導出","日本建築学会大会（近畿）","日本建築学会大会学術講演梗概集","日本建築学会",,,"pp. 837 - 838",2014,Sept.
"Kazuya Mitsui,Atsushi Sato,Hisayuki Okada,Tetsuro Ono","STUDY ON FLEXURAL BUCKLING STRESS OF BUILT - UP COMPRESSSION MEMBER COMPOSED WITH LIGHT GAUGE MEMBERS","EURO STEEL 2014 7th European Conference on Steel and Composite Structures","EURO STEEL 2014 7th European Conference on Steel and Composite Structures",,,,"pp. 121 - 131",2014,Sept.
"土屋大志,三井和也,佐藤篤司,岡田久志,小野徹郎","薄板軽量形鋼組立圧縮材の曲げ座屈耐力に関する研究 : その3 区間長さの影響","日本建築学会大会（近畿）","日本建築学会大会学術講演梗概集","日本建築学会",,,"pp. 835 - 836",2014,Sept.
"三井和也,佐藤篤司,岡田久志,小野徹郎","薄板軽量形鋼組立圧縮材の曲げ座屈耐力に関する研究 : その3 帯板形式薄板軽量形鋼組立圧縮材細長比算定式の導出","日本建築学会東海支部研究集会","日本建築学会東海支部研究報告集","日本建築学会","Vol. 52",,"pp. 165 - 168",2014,Feb.
"三井和也,佐藤篤司,岡田久志,小野徹郎","薄板軽量形鋼組立圧縮材の曲げ座屈耐力に関する研究 : その2 綴り材剛比の影響","日本建築学会大会（北海道）","日本建築学会大会学術講演梗概集","日本建築学会",,,"pp. 949 - 950",2013,Aug.
"三井和也,佐藤篤司,岡田久志,小野徹郎,江口絢子","薄板軽量形鋼組立圧縮材の曲げ座屈耐力に関する研究 : その2綴り材剛比の影響","日本建築学会東海支部研究集会","日本建築学会東海支部研究報告集","日本建築学会","Vol. 51",,"pp. 213 - 216",2013,Feb.
"三井和也,佐藤篤司,岡田久志,藤内繁明,小野徹郎","薄板軽量形鋼組立圧縮材の曲げ座屈応力度","日本建築学会大会（東海）","日本建築学会大会学術講演梗概集","日本建築学会",,,"pp. 739 - 740",2012,Sept.
"三井和也,岡田久志,小野徹郎,佐藤篤司,中谷純子","薄板軽量形鋼組立圧縮材の曲げ座屈実験","日本建築学会東海支部研究集会","日本建築学会東海支部研究報告集","日本建築学会","Vol. 50",,"pp. 149 - 152",2012,Feb.