"Joon-wan KIM,Zebing MAO,Kazuhiro YOSHIDA","Performance of ECF Micropumps-integrated O/O (oil-in-oil) Droplet Generators","The 16th International Conference on Flow Dynamics (ICFD2019)","The 16th International Conference on Flow Dynamics (ICFD2019)",,,,"pp. 386-387",2019,Nov.
"Joon-wan Kim,Yoshiho Yamada,Shinichi Yokota","Micro ECF (electro-conjugate fluid) hydraulic power sources based on the modular design of TPSEs (triangular prism and slit electrode pairs)",,"The International Journal of Advanced Manufacturing Technology",,"Volume 106",,"Page 627-639",2019,Nov.
"Thapanun Sudhawiyangkul,KAZUHIRO YOSHIDA,Sang In Eom,Joon-wan Kim","A novel bending microactuator with integrated flexible electrorheological microvalves using an alternating pressure source for multi-actuator systems",,"Microsysem Technologies","Springer","Vol. 26",,"pp. 1507?1519",2019,Nov.
"Nhat Dang NGUYEN,Kazuhiro Yoshida,Joon-wan KIM","MEMS fabrication of a gap-controllable stencil mask for electrospray deposition","The 4th International Symposium on Biomedical Engineering (ISBE2019)","The 4th International Symposium on Biomedical Engineering",,,,"pp. 284-285",2019,Nov.
"Zebing Mao,Kazuhiro Yoshida,Joon-wan Kim","A droplet-generator-on-a-chip actuated by ECF (electro-conjugate fluid) micropumps",,"Microfluidics and Nanofluidics","Springer Berlin Heidelberg","Vol. 23","No. 12","pp. 130",2019,Nov.
"牧田 耀,吉田 和弘,嚴 祥仁,金 俊完","交流電気浸透のメカニズムに関する研究","山梨講演会2019","山梨講演会 2019講演論文集 ＣＤ",,,"No. 190-3","pp. 79-80",2019,Oct.
"菅内 大地,吉田 和弘,嚴 祥仁,金 俊完","高圧で駆動するERマイクロシステムに関する研究","山梨講演会2019","山梨講演会 2019講演論文集 ＣＤ",,,"No. 190-3","pp. 77-78",2019,Oct.
"阿部 喜宗,吉田 和弘,嚴 祥仁,金 俊完","多自由度アクチュエータシステムのための共振形マイクロ交流圧力源に関する研究","山梨講演会2019","山梨講演会 2019講演論文集 ＣＤ",,,"No. 190-3","pp. 75-76",2019,Oct.
"塩田 陽平,吉田 和弘,金 俊完","ECFマイクロポンプのラボオンチップへのパッケージングに関する研究","2019年秋季フルードパワーシステム講演会","2019年秋季フルードパワーシステム講演会 講演論文集",,,,"pp. 84-96",2019,Oct.
"Zebing Mao,Kazuhiro Yoshida,Joon-wan Kim","Droplet Sorter Using a Cantilever Actuated by Electro-conjugate Fluid Micropumps","23rd International Conference on Mechatronics Technology ? ICMT 2019","ICMT 2019 Book of Abstracts",,,,"p. 27",2019,Oct.
"Zebing Mao,Kazuhiro Yoshida,Joon-wan Kim","On‐demand water‐in‐oil droplet generation using  ECF (electro‐conjugate fluid ) micropump","14th IEEE Nanotechnology Materials and Devices Conference - IEEE NMDC 2019","Nanotechnology Materials and Devices Conference  Tehcnical Program","IEEE",,,"p. 68",2019,Oct.
"奥村 庄太郎,吉田 和弘,金 俊完","エレクトロスピニング法を用いた配向ナノファイバに関する研究","山梨講演会2019","山梨講演会 2019講演論文集 ＣＤ",,,"No. 190-3","pp. 81-82",2019,Oct.
"金俊完,濱野真衣,吉田和弘","電界共役流体(ECF)を液圧源とするマイクロジャミンググリッパに関する研究","日本機械学会2019年度年次大会","日本機械学会2019年度年次大会講演論文集","一般社団法人 日本機械学会",,"No. 19-1","  J11113",2019,Sept.
"嚴祥仁,本同和人,吉田和弘,金俊完","誘電エラストマーアクチュエータの高出力化に関する研究(UV硬化性PDMSへのシリコンオイル添加の効果)","日本機械学会2019年度年次大会","日本機械学会2019年度年次大会講演論文集","一般社団法人 日本機械学会",,"No. 19-1","  J11112",2019,Sept.
"Huy Hoang Huynh,Kazuhiro Yoshida,Joon-Wan Kim","Proposal of a MEMS-based Cooling System Using an ECF Micropump","International Symposium on PRecision Engineering and Sustainable Manufacturing  (PRESM2019)","International Symposium on PRecision Engineering and Sustainable Manufacturing  (PRESM2019) Program&Proceedings",,,,"p. OP103",2019,July
"Joon-wan Kim,Yusuke Tanabe,Shinichi Yokota","Comprehending Electro-conjugate Fluid (ECF) Jets by Using the Onsager Effect",,"Sensors and Actuators A: Physical",,"Vol. 295","No. 15","pp. 266-273",2019,June
"Zebing Mao,Kazuhiro Yoshida,Joon-wan Kim","Developing O/O (oil-in-oil) droplet generators on a chip by using ECF (electro-conjugate fluid) micropumps",,"Sensors and Actuators B: Chemical",,"Vol. 296","No. 1","pp. 126669",2019,June
"Tatsuya Matsubara,Huy Hoang Huynh,Kazuhiro Yoshida,Joon-wan Kim","Development of MEMS-fabricated Bidirectional ECF (Electro-Conjugate Fluid) micropumps",,"Sensors and Actuators A: Physical",,"Vol. 295","No. 15","pp. 317-323",2019,June
"Thapanun SUDHAWIYANGKUL,Kazuhiro YOSHIDA,Sang In EOM,Joon-wan KIM","Proposal of a two-DOFs soft microactuator integrated with flexible ER microvalves","第31回 「電磁力関連のダイナミクス」シンポジウム（SEAD31)","〔No.19-6〕日本機械学会 第 31 回「電磁力関連のダイナミクス」シンポジウム講演論文集",,,,"  22B1-1",2019,May
"相 翔太,吉田 和弘,金 俊完","ECFマイクロポンプの高出力化を可能にする新たな電極対の提案","2019年春季フルードパワーシステム講演会","2019年春季フルードパワーシステム講演会 講演論文集",,,,"pp. 86-88",2019,May
"金 俊完,鳴海 将,吉田 和弘","ECF液圧源で駆動する昆虫形ソフトロボットに関する研究","第31回 「電磁力関連のダイナミクス」シンポジウム（SEAD31)","〔No.19-6〕日本機械学会 第 31 回「電磁力関連のダイナミクス」シンポジウム講演論文集",,,,"  23B1-1",2019,May
"Zebing Mao,Kazuhiro Yoshida,Joon-wan Kim","Releasing large-area SU-8 structures without using any sacrificial layers",,"Microelectronic Engineering",,"Volume 212",,"pp. 53-60",2019,Apr.
"Yuki Tamanoi,Ryota Horai,Kazuhiro Yoshida,Sang In Eom,Joon-wan Kim","A Study on an In-Pipe Mobile Micromachine Having a Fluid Inertia Micropump","8th Int. Conf. on Manufacturing, Machine Design and Tribology (ICMDT2019)","Proc. of 8th Int. Conf. on Manufacturing, Machine Design and Tribology (ICMDT2019)",,,,"  TH-D-1-3",2019,Apr.
"Nhat Dang Khoa NGUYEN,Kazuhiro YOSHIDA,Joon-wan KIM","Controlling electrospray-deposited pattern by changing electrical field on a stencil mask","8th Int. Conf. on Manufacturing, Machine Design and Tribology (ICMDT2019)","Proc. of 8th Int. Conf. on Manufacturing, Machine Design and Tribology (ICMDT2019)",,,,"  TH-D-1-4",2019,Apr.
"金 俊完","マイクロロボットに有効な機能性流体",,"フルードパワーシステム",,"Vol. 50","No. 2","pp. 82-85",2019,Mar.
"Zebing Mao,Kazuhiro Yoshida,Joon-wan Kim","Alleviation of the adhesive protrusion problem at the bonding interface of free-standing microstructures",,"Journal of Mechanical Science and Technology",,"Volume 33","  2","pp. 749?757",2019,Feb.
"Zebing Mao,Kazuhiro Yoshida,Joon-wan Kim","Fast packaging by a partially-crosslinked SU-8 adhesive tape for microfluidic sensors and actuators",,"Sensors and Actuators A: Physical",,"Volume 289","  15","Page 77-86",2019,Feb.
"Zebing Mao,Kazuhiro Yoshida,Joon-wan Kim","A micro vertically-allocated SU-8 check valve and its characteristics",,"Microsystem Technologies","Springer Nature","Volume 25","No. 1","pp. 245-255",2019,Jan.