|
Publication List - YOSHIHIRO TERADA (148 entries)
- 2027
- 2026
- 2025
- 2024
- 2023
- All
Journal Paper
-
Yoshiya Yamaguchi,
Mayumi Abe,
Ryotaro Tajima,
YOSHIHIRO TERADA.
鍛造Ni基超合金Udimet 520における等温時効熱処理中の微細組織変化,
Volume 84,
11-18,
Jan. 2020.
-
Yoshiya Yamaguchi,
Hiromu Hisazawa,
Yoshihiro Terada.
Microstructure Quantification in Nickel-Based Superalloy Udimet 720Li,
Jan. 2019.
-
Yoshiya Yamaguchi,
hiromu hisazawa,
YOSHIHIRO TERADA.
鍛造Ni基超合金Udimet 720Liにおける析出相形態の定量的評価,
Oct. 2018.
-
Hisazawa, H.,
YOSHIHIRO TERADA,
Adziman, F.,
Crudden, D.J.,
Collins, D.M.,
Armstrong, D.E.J.,
Reed, R.C..
The effect of Nb/Ti ratio on hardness in high-strength Ni-based superalloys,
Metals,
Vol. 7,
No. 3,
2017.
-
久澤 大夢,
YOSHIHIRO TERADA.
鍛造型Ni 基超合金におけるγ′相の析出形態に及ぼすTiおよびAl添加量の影響,
日本金属学会誌,
公益社団法人 日本金属学会,
Vol. 81,
No. 5,
pp. 244-250,
2017.
-
Hisazawa, H.,
YOSHIHIRO TERADA,
MASAO TAKEYAMA.
Morphology evolution of γ′ precipitates during isothermal exposure in wrought Ni-based superalloy Inconel X-750,
Materials Transactions,
Vol. 58,
No. 5,
pp. 817-824,
2017.
-
YOSHIHIRO TERADA,
Murata, Y.,
Sato, T..
Life assessment of die-cast Mg-5Al-1.7Ca alloys under creep service conditions,
Materials Science and Engineering A,
Vol. 613,
pp. 136-140,
2014.
-
Yoshihiro Terada,
Yoshinori Murata,
Tatsuo Sato.
Creep life assessment of a die-cast Mg-5Al-0.3Mn alloy,
Materials Science & Engineering A,
Vol. 584,
pp. 63-66,
Nov. 2013.
-
YOSHIHIRO TERADA,
YOSHINORI MURATA,
TATSUO SATO.
Mg-Al-Ca系ダイカスト合金における高温クリープ変形中の転位組織解析,
日本金属学会誌,
Vol. 77,
No. 9,
pp. 391-397,
Sept. 2013.
-
Yoshihiro TERADA,
Yoshinori MURATA,
Tatsuo SATO.
A Model of Dislocation Movements during Creep of Die-Cast Mg-Al-Ca Alloy,
Materials Science and Technology of Japan,
Vol. 50,
No. 3,
pp. 109-116,
June 2013.
-
N.Takata,
Hassan Gassemi-Armaki,
Y.Terada,
M.Takeyama,
K.S.Kumar.
Plastic deformation of the C14 Laves phase (Fe,Ni)2Nb,
Scripta MATERIALIA,
ELSEVIER,
Vol. 68,
pp. 615-618,
Dec. 2012.
-
Kousuke Suzuki,
Naoki Takata,
YOSHIHIRO TERADA,
MASAO TAKEYAMA.
Fe-Ni-Nb-Mo 4元系におけるg-Fe/TCP/GCP相間の高温における相平衡と元素分配,
耐熱金属材料第123委員会11学期研究会,
日本学術振興会 耐熱金属材料第第123委員会研究報告,
日本学術振興会,
Vol. 53,
No. 3,
pp. 205-215,
Nov. 2012.
-
Yoshiki Shioda,
Yoshihiro Terada,
Yoshinori Murata.
Creep Properties of Binary Mg-Ca Cast Alloys at 473 K,
Materials Science and Technology of Japan,
Vol. 49,
pp. 132-138,
Oct. 2012.
-
Yoshihiro Terada,
Yoshinori Murata,
Tatsuo Sato,
Masahiko Morinaga.
Dislocation Movements during High-Temperature Creep in Die-Cast Mg-Al-Ca Alloys,
Proc. of 12th Intern. Conf. on Creep and Fracture of Engineering Materials and Structures,
The Japan Institute of Metals,
pp. 1-4,
May 2012.
-
ATSUSHI SHIBAYAMA,
YOSHIHIRO TERADA,
YOSHINORI MURATA,
MASAHIKO MORINAGA.
Mg-Ca二元系亜共晶合金における高温クリープ挙動,
日本金属学会誌,
Vol. 76,
No. 4,
pp. 251-255,
Apr. 2012.
-
Yoshihiro Terada,
Yoshinori Murata,
Tatsuo Sato,
Masahiko Morinaga.
Assessment of Creep Rupture Life of Die-Cast Mg-Al-Mn Alloy,
Materials Science and Technology of Japan,
Vol. 48,
No. 3,
pp. 134-138,
June 2011.
-
Yoshihiro Terada,
Yoshinori Murata,
Tatsuo Sato,
Masahiko Morinaga.
Analysis of Creep Rupture Life of Mg-Al-Mn Alloy Produced by Die-Casting,
Materials Chemistry and Physics,
Vol. 128,
pp. 32-34,
May 2011.
-
Yoshihiro Terada,
Masashi Tsukahara,
Atsushi Shibayama,
Yoshinori Murata,
Masahiko Morinaga.
Creep Characteristics of a Hypoeutectic Mg-Ca Binary Alloy with a Near-Fully Lamellar Microstructure,
Scripta Materialia,
Vol. 64,
pp. 1039-1042,
Mar. 2011.
-
Atsushi Shibayama,
Yoshihiro Terada,
Yoshinori Murata,
Masahiko Morinaga.
Creep Behavior of Hypoeutectic Mg-Ca Binary Alloys,
Materials Transactions,
Vol. 51,
No. 12,
pp. 2284-2288,
Dec. 2010.
-
新谷剛志,
村田純教,
YOSHIHIRO TERADA,
森永正彦.
X線プロファイル解析および透過型電子顕微鏡観察によるMg-Al-Mn-Ca合金の転位密度測定,
日本金属学会誌,
Vol. 74,
No. 12,
pp. 806-810,
Dec. 2010.
-
Takashi Shintani,
Yoshinori Murata,
Yoshihiro Terada,
Masahiko Morinaga.
Evaluation of Dislocation Density in a Mg-Al-Mn-Ca Alloy Determined by X-ray Diffractometry and Transmission Electron Microscopy,
Materials Transactions,
Vol. 51,
No. 6,
pp. 1067-1071,
June 2010.
-
Yoshihiro Terada,
Tatsuo Sato.
Assessment of Creep Rupture Life of Heat Resistant Mg-Al-Ca Alloys,
Journal of Alloys and Compounds,
Vol. 504,
pp. 261-264,
June 2010.
-
Yoshihiro Terada,
Tomoyuki Enokida,
Tatsuo Sato.
Effect of Prior Deformation on Creep Behavior of a Die-Cast Mg-Al-Ca Alloy,
Materials Transactions,
Vol. 50,
No. 10,
pp. 2351-2354,
Oct. 2009.
-
Yoshihiro Terada,
Daigo Itoh,
Tatsuo Sato.
Dislocation Analysis of Die-Cast Mg-Al-Ca Alloy after Creep Deformation,
Materials Science and Engineering A,
Vol. 523,
pp. 214-219,
Sept. 2009.
-
Yoshihiro Terada,
Daigo Itoh,
Tatsuo Sato.
Dislocation Movements during Creep in a Die-Cast AM50 Magnesium Alloy,
Materials Chemistry and Physics,
Vol. 117,
pp. 331-334,
Aug. 2009.
-
Yoshihiro Terada,
Daigo Itoh,
Tatsuo Sato.
Creep Rupture Properties of Die-Cast Mg-Al-Ca Alloys,
Materials Chemistry and Physics,
Vol. 113,
pp. 503-506,
Jan. 2009.
-
Yoshihiro Terada.
Thermophysical Properties of L12 Intermetallic Compounds of Iridium,
Platinum Metals Review,
Vol. 52,
No. 4,
pp. 208-214,
Dec. 2008.
-
Daigo Itoh,
Yoshihiro Terada,
Tatsuo Sato.
Effect of Calcium Additions on Creep Properties of a Die-Cast AM50 Magnesium Alloy,
Materials Transactions,
Vol. 49,
No. 9,
pp. 1957-1962,
Sept. 2008.
-
Yoshihiro Terada,
Tatsuo Sato.
Relationship between Minimum Creep Rate and Rupture Life for a Die-Cast Mg-Al-Mn Alloy,
Materials Transactions,
Vol. 49,
No. 3,
pp. 439-442,
Mar. 2008.
-
Yoshihiro Terada,
Naoya Ishimatsu,
Tatsuo Sato.
Creep Parameters in a Die-Cast Mg-Al-Ca Alloy,
Materials Transactions,
Vol. 48,
No. 9,
pp. 2329-2335,
Sept. 2007.
-
Yoshihiro Terada,
Yukako Mori,
Tatsuo Sato.
Role of Eutectic Intermetallic Phase on Creep Strength in a Die-Cast Mg-Al-Ca Alloy: Evaluation by Internal Stress Measurement,
Mater. Trans.,
Vol. 48,
No. 2,
pp. 97-100,
Feb. 2007.
-
Masaomi Mitsutake,
Yoshihiro Terada,
Takashi Matsuo.
Change in Stress Axis with Creep Deformation in Ni-20mass%Cr Single Crystal with Orientation of [011],
Adv. Mater. Res.,
Vol. 15-17,
pp. 870-875,
2007.
-
Kentaro Yuge,
Yoshihiro Terada,
Takashi Matsuo.
Change in Stress Axis with Creep Deformation in Gamma-Single Phase Ni-20mass%Cr Single Crystal within Standard Stereographic Triangle,
Adv. Mater. Res.,
Vol. 15-17,
pp. 864-869,
2007.
-
Yoshihiro Terada,
Yukako mori,
Tatsuo Sato.
Internal Stress during Creep in a Die-cast AM50 Magnesium Alloy at 473K,
MATER. TRANS.,
Vol. 47,
No. 10,
pp. 2493-2496,
Oct. 2006.
-
Yoshihiro Terada,
Kenji Ohkubo,
Seiji Miura,
Tetsuo Mohri.
Thermophysical Properties of Rh3X for Ultra-High Temperature Applications,
Platinum Metals Rev.,
Vol. 50,
No. 2,
pp. 69-76,
Apr. 2006.
-
N.Ishimatsu,
Y.Terada,
T.Sato,
K.Ohori.
Creep Characteristics of a Diecast AM50 Magnesium Alloy,
Metall. Mater. Trans. A,
Vol. 37A,
pp. 243-248,
Jan. 2006.
-
Y.Terada,
K.Ohkubo,
T.Mohri.
Thermal Conductivity of Platinum Alloys at Higher Temperatures,
Platinum Met. Rev.,
Vol. 49,
No. 1,
pp. 21-26,
2005.
-
Y.Terada,
N.Ishimatsu,
Y.Mori,
T.Sato.
Eutectic Phase Investigation in a Ca-added AM50 Magnesium Alloy Produced by Die Casting,
Mater. Trans.,
Vol. 46,
No. 2,
pp. 145-147,
2005.
-
S.Miura,
K.Ohkubo,
Y.Terada,
Y.Kimura,
Y.Mishima,
Y.Yamabe-Mitarai,
H.Harada,
T.Mohri.
Phase Equilibria in the Ir-rich Portion of the Ir-Al-X (X:Ti,Zr and Hf) Ternary Systems,
J. Alloys Comp.,
Vol. 393,
pp. 239-247,
2005.
-
S.Miura,
K.Ohkubo,
Y.Terada,
Y.Kimura,
Y.Mishima,
Y.Yamabe-Mitarai,
H.Harada,
T.Mohri.
Phase Equilibria in Ir-rich Portion of Ir-Al-X (X:V,Nb and Ta) Ternary Systems,
J. Alloys Comp.,
Vol. 395,
pp. 263-271,
2005.
-
Y.Mori,
Y.Terada,
T.Sato.
Microstructure Stability and Creep Strength in a Die-cast AX52 Magnesium Alloy,
Mater. Trans.,
Vol. 46,
No. 8,
pp. 1749-1752,
2005.
-
Y.Terada,
R.Sota,
N.Ishimatsu,
T.Sato,
K.Ohori.
A Thousandfold Creep Strengthening by Ca Addition in Die-Cast AM50 Magnesium Alloy,
Metall. Mater. Trans. A,
Vol. 35A,
pp. 3029-3032,
2004.
-
T.Tokumoto,
Y.Terada,
T.Matsuo.
Low-Stress Creep of Ni-20mass%Cr Single Crystal with [001] Orientation,
Mater. Sci. Forum,
Vol. 426-432,
pp. 803-808,
2003.
-
Y.Terada,
K.Ohkubo,
S.Miura,
J.M.Sanchez,
T.Mohri.
Thermal Conductivity and Thermal Expansion of L12 Intermetalllic Compounds Based on Rhodium,
J. Alloys Comp.,
Vol. 354,
pp. 202-207,
2003.
-
Y.Terada,
K.Ohkubo,
S.Miura,
J.M.Sanchez,
T.Mohri.
Thermal Conductivity and Thermal Expansion of Ir3X (X=Ti, Zr, Hf, V, Nb, Ta) Compounds for High-Temperature Applications,
Mater. Chem. Phys.,
Vol. 80,
pp. 385-390,
2003.
-
Y.Terada,
K.Ohkubo,
T.Mohri,
T.Suzuki.
Thermal Conductivity of Cobalt-Based Alloys,
Metall. Mater. Trans. A,
Vol. 34A,
pp. 2026-2028,
2003.
-
Y.Terada,
T.Yasui,
T.Matsuo.
Creep of [011]-Oriented Ni-20mass%Cr Single Crystals,
Mater. Sci. Forum,
Vol. 426-432,
pp. 785-790,
2003.
-
Yoshihiro Terada,
Naoya Ishimatsu,
Rie Sota,
Tatsuo Sato,
Koishi Ohori.
Creep Characteristics of Ca-added Die-Cast AM50 Magnesium Alloys,
Mater. sci. forum,
Vol. 419-422,
pp. 459-464,
2003.
-
T.Matsuo,
Y.Nakamoto,
Y.Terada.
Change in Shape of Creep Curves of g Single Phase Ni-20mass%Cr Single Crystals with Decreasing Stress,
Mater. Sci. Forum,
Vol. 426-432,
pp. 737-742,
2003.
-
寺田芳弘,
大久保賢二,
毛利哲雄.
高熱伝導率を有するCu基金属間化合物の探索手法,
銅と銅合金,
Vol. 42,
No. 1,
pp. 51-55,
2003.
-
Y.Terada,
K.Ohkubo,
T.Mohri,
T.Suzuki.
Thermal Conductivity of Intermetallic Compounds with Metallic Bonding,
Mater. Trans.,
Vol. 43,
No. 12,
pp. 3167-3176,
2002.
-
O.Takahashi,
Y.Terada,
M.Takeyama,
T.Matsuo.
Creep Characteristics and Internal Stress in g-TiAl,
Mater. Sci. Eng.,
Vol. A329-331,
pp. 835-839,
2002.
-
Y.Terada,
K.Ohkubo,
T.Mohri,
T.Suzuki.
Site Preference in NiAl - Determination by Thermal Conductivity Measurement,
Mater. Sci. Eng.,
Vol. A329-331,
pp. 468-473,
2002.
-
Y.Terada,
K.Ohkubo,
T.Mohri,
T.Suzuki.
Effects of Alloying Additions on Thermal Conductivity of Ferritic Iron,
ISIJ International,
Vol. 42,
No. 3,
pp. 322-324,
2002.
-
YOSHIHIRO TERADA.
Creep of [001]-Oriented Ni-20mass%Cr Single Crystals,
Materials for Advanced Power Engineering 2002,
pp. 177-186,
2002.
-
Y.Terada,
T.Mohri,
T.Suzuki.
Thermal Conductivity of Intermetallic Compounds with Ternary Additions,
Proc. of the 4th Pacific Rim Intern. Conf. on Advanced Materials and Processing,
pp. 991-994,
2001.
-
T.Matsuo,
D.Serino,
Y.Terada.
Change in Feature of Transient Creep with Decreasing Stress,
Proc. of 7th Intern. Conf. on Creep and Fatigue at Elevated Temperatures,
pp. 285-293,
2001.
-
Y.Terada,
K.Ohkubo,
T.Mohri,
T.Suzuki.
Ridge Direction of Thermal Conductivity Contours in Ternary CoAl Phase,
Metall. Mater. Trans. A,
Vol. 32A,
pp. 2135-2136,
2001.
-
Y.Terada,
K.Ohkubo,
T.Mohri,
T.Suzuki.
Site Preference Determination in Intermetallic Compounds by Thermal Conductivity Measurement,
J. Mater. Res.,
Vol. 16,
No. 8,
pp. 2314-2320,
2001.
-
T.Matsuo,
D.Serino,
Y.Terada.
Change in Feature of Transient Creep with Decreasing Stress,
Proc. of the 7th Intern. Conf. on Creep and Fatigue at Elevated Temperatures,
pp. 551-555,
2001.
-
Y.Terada,
K.Ohkubo,
T.Mohri,
T.Suzuki.
Thermal Conductivity of Ni3Al with Ternary Additions,
Mater. Sci. Eng.,
Vol. A311,
pp. 232-235,
2001.
-
YOSHIHIRO TERADA.
Creep Deformation of Ni-20mass%Cr Single Crystals with [001], [011] and [-111] Orientations,
Proc. 9th Intern. Conf. on Creep and Fracture of Engineering Materials and Structures,
pp. 427-435,
2001.
-
Y.Terada,
Y.Ishiwari,
T.Matsuo.
Stress Dependence of Evolution of Dynamic Recrystallization in g Single Phase Single Crystal,
Key Eng. Mater.,
Vol. 171-174,
pp. 585-592,
2000.
-
S.Miura,
K.Honma,
Y.Terada,
J.M.Sanchez,
T.Mohri.
Mechanical Properties of Rh-based L12 Intermetallic Compounds Rh3Ti, Rh3Nb and Rh3Ta,
Intermetallics,
Vol. 8,
pp. 785-791,
2000.
-
Y.Terada,
K.Ohkubo,
T.Mohri,
T.Suzuki.
Ridge Direction of Thermal Conductivity Contours in Ternary Ni3Ga Phase,
Intermetallics,
Vol. 8,
pp. 447-449,
2000.
-
S.Miura,
Y.Terada,
T.Suzuki,
C.T.Liu,
Y.Mishima.
Thermal Conductivity of Ni-Al Powder Compacts for Reaction Synthesis,
Intermetallics,
Vol. 8,
pp. 151-155,
2000.
-
Y.Terada,
K.Ohkubo,
T.Mohri,
T.Suzuki.
A Comparative Study of Thermal Conductivity in Alloys and Compounds,
Mater. Sci. Eng. A,
Vol. 278,
pp. 292-294,
2000.
-
T.Matsuo,
S.Takahashi,
Y.Ishiwari,
Y.Terada.
Creep in Single Crystal of g Single Phase Ni-20Cr Alloy and Evolution of Dynamic Recrystallization,
Key Eng. Mater.,
Vol. 171-174,
pp. 553-560,
2000.
-
H.Miyazawa,
R.Takaku,
D.Kawaguchi,
Y.Terada,
T.Matsuo.
Creep and Evolution of Dynamic Recrystallization in g Single Phase Crystals Located at Poles in Stabdard Stereo-Triangle,
Key Eng. Mater.,
Vol. 171-174,
pp. 577-584,
2000.
-
Y.Terada,
K.Ohkubo,
T.Mohri,
T.Suzuki.
Thermal Conductivity in Pt-based Alloys,
J. Alloys Comp.,
Vol. 285,
pp. 233-237,
1999.
-
R.Nino,
Y.Terada,
C.-S.Oh,
T.Mohri,
T.Suzuki.
Phase Diagram of Ni3V-Co3V Pseudobinary System,
J. Phase Equil.,
Vol. 20,
No. 1,
pp. 29-34,
1999.
-
T.Mohri,
H.Miyamoto,
Y.Terada,
T.Suzuki.
Statistical Thermodynamics of Configurational Hardening in a Solid Solution,
Mater. Sci. Eng. A,
Vol. 267,
pp. 151-158,
1999.
-
Y.Terada,
K.Ohkubo,
T.Mohri,
T.Suzuki.
Effect of Ternary Additions on Thermal Conductivity of NiAl,
Intermetallics,
Vol. 7,
pp. 717-723,
1999.
-
大久保賢二,
寺田芳弘,
毛利哲雄,
鈴木朝夫.
レーザーフラッシュ法による熱伝導率測定における最適計測条件,
熱処理,
Vol. 38,
No. 6,
pp. 316-321,
1998.
-
T.Matsuo,
T.Kashiwa,
M.Nijo,
Y.Terada.
Effects of Ta and Re on Creep in Single Crystals of Gamma Single Phase Ni-20Cr Alloy,
Proc. of the St Catherine's College Kobe Institute,
pp. 147-154,
1998.
-
Y.Terada,
J.Nakata,
T.Mohri,
T.Suzuki.
A Method for Seeking High Thermal Conductivity Compounds,
Intermetallics,
Vol. 6,
No. 6,
pp. 479-485,
1998.
-
Y.Terada,
T.Mohri,
T.Suzuki.
Thermal Conductivity in Intermetallic Compounds,
Proc. of the 3rd Pacific Rim Intern. Conf. on Advanced Materials and Processing,
pp. 2431-2436,
1998.
-
T.Honma,
Y.Terada,
S.Miura,
T.Mohri,
T.Suzuki.
Gruneisen Parameters in Intermetallic Compounds NiAl and Ni3Al,
Proc. 1998 Intern. Symp. Adv. Energy Tech.,
pp. 699-704,
1998.
-
Y.Terada,
K.Ohkubo,
T.Mohri,
T.Suzuki.
Thermal Conductivity in Nickel Solid Solutions,
J. Appl. Phys.,
Vol. 81,
No. 5,
pp. 2263-2268,
1997.
-
YOSHIHIRO TERADA.
Thermal and Electrical Conductivities in Nickel and Iron Aluminides,
Proc. of the Intern. Symp. on Nickel and Iron Aluminides: Processing, Properties and Applicatioons,
pp. 223-241,
1997.
-
Y.Watanabe,
Y.Kato,
Y.Terada,
T.Mohri.
Thermal Conductivity of Al/Al3Ni FGMs Manufactured by Centrifugal Method,
Proc. of the 5th Jpn. Intern. SAMPE Symp.,
pp. 475-480,
1997.
-
Y.Terada,
K.Ohkubo,
T.Mohri,
T.Suzuki.
Thermal Conductivity of Ni3X and Pt3X in Ordered and Disordered States,
Mater. Sci. Eng. A,
Vol. 239-240,
pp. 907-914,
1997.
-
J.Nakata,
Y.Terada,
S.Takizawa,
K.Ohkubo,
T.Mohri,
T.Suzuki.
Thermal Conductivity in X2YZ Heusler Type Intermetallic Compounds,
Mater. Trans. JIM,
Vol. 37,
No. 3,
pp. 442-447,
1996.
-
S.Hanai,
Y.Terada,
K.Ohkubo,
T.Mohri,
T.Suzuki.
Thermal Conductivity in A3B Intermetallic Compounds Based on Iron and Nickel,
Intermetallics,
Vol. 4,
pp. S41-S47,
1996.
-
T.Suzuki,
Y.Terada,
T.Mohri.
Thermal and Electrical Conductivities in Intermetallics and Solid Solutions,
Proc. of the 7th Symp. on High-Performance Materials for Severe Environments,
pp. 9-30,
1996.
-
大久保賢二,
YOSHIHIRO TERADA,
滝沢 聡,
毛利哲雄,
鈴木朝夫.
金属間化合物NiAlの非化学量論組成における熱伝導度と電気伝導度,
J. Japan Inst. Metals,
Vol. 60,
No. 8,
pp. 695-699,
1996.
-
Y.Terada,
K.Ohkubo,
K.Nakagawa,
T.Mohri,
T.Suzuki.
Thermal Conductivity of B2-type Aluminides and Titanides,
Intermetallics,
Vol. 3,
No. 5,
pp. 347-355,
1995.
-
Y.Terada,
T.Mohri,
T.Suzuki.
Application of Norbury Rule to Thermal Conductivity in Intermetallic Compounds,
Mat. Res. Soc. Symp. Proc.,
Vol. 364,
pp. 201-206,
1995.
-
Y.Terada,
T.Matsuo,
M.Kikuchi.
Effect of Grain Boundaries on Creep Deformation in Austenitic Alloys,
Proc. of the 7th JIM Intern. Symp. on Aspect of High Temperature Deformation and Fracture in Crystalline Materials,
pp. 27-34,
1993.
-
Y.Terada,
T.Matsuo,
M.Kikuchi.
Evolution of Subgrains during Tertiary Creep in an Austenitic Single Phase Alloy,
Stainless Steel '91,
pp. 618-626,
June 1991.
-
T.Matsuo,
K.Nakajima,
Y.Terada,
M.Kikuchi.
High Temperature Creep Resistance of Austenitic Heat-resisting Steels,
Mater. Sci. Eng.,
Vol. A146,
pp. 261-272,
1991.
-
YOSHIHIRO TERADA.
High Temperature Creep Properties of Austenitic Heat Resisting Steels,
Proc. of Czech and Slovak-Japan Technical Exchange Meeting on Steel Products and Properties for Fossile-Fuel Power Generating Plants and Chemical Equipment,
pp. 1-24,
1991.
Book
-
YOSHIHIRO TERADA.
化学事典-第2版-,
森北出版,
Dec. 2009.
-
YOSHIHIRO TERADA.
金属熱処理の基礎と実践,
東京工業大学ものつくり教育支援センター,
Apr. 2008.
-
Y.Terada,
Y.Nakamoto,
T.Matsuo.
Materials for Advanced Power Engineering 2002,
Materials for Advanced Power Engineering 2002,
Forschungszentrum,
pp. 177-186,
2002.
-
T.Matsuo,
T.Kashiwa,
M.Nijyo,
Y.Terada.
Aerospace Materials,
Aerospace Materials,
IOP,
pp. 285-293,
2001.
-
T.Honma,
Y.Terada,
S.Miura,
T.Mohri,
T.Suzuki.
Advanced Microscopy and Its Application to Materials Science,
Advanced Microscopy and Its Application to Materials Science,
CARET,
pp. 118-123,
2000.
-
T.Suzuki,
Y.Terada,
T.Mohri.
Nickel and Iron Aluminides: Processing, Properties and Applications,
Nickel and Iron Aluminides: Processing, Properties and Applications,
ASM International,
pp. 223-241,
1997.
International Conference (Reviewed)
-
Hiromu Hisazawa,
Yoshihiro Terada,
Naoki Takata,
Masao Takeyama.
Microstructural Characterization of ' Precipitates in Wrought Ni-Based Superalloy Inconel X-750,
The 1st International Conference on Advanced High-Temperature Materials Technology for Sustainable andReliable Power Engineering (123HiMAT-2015),
Proceedings of The 1st International Conference on Advanced High-Temperature Materials Technology for Sustainable andReliable Power Engineering (123HiMAT-2015),
JSPS of the 123rd Committee on Heat Resisting Materials and Alloys,
pp. 250-253,
Mar. 2016.
-
Masao Takeyama,
Imanuel Tarigan,
Naoki Takata,
Yoshihiro Terada,
Naoya Kanno.
Fe2Nb Laves Phases as a Promising Strengthener in High-temperature Structural Steels,
2012 MRS FALL MEETING,
2012 MRS FALL MEETING PROGRAM & EXHIBIT GUIDE,
Materials Research Socienty,
p. 416,
Nov. 2012.
Official location
-
Kousuke Suzuki,
Naoki Takata,
Yoshihiro Terada,
Masao Takeyama.
Phase Equilibria and Stability among γ-Fe/TCP/GCP Phases in Fe-Ni-Nb-Mo Quaternary System at Elevated Temperatures,
2012 MRS FALL MEETING,
2012 MRS FALL MEETING PROGRAM & EXHIBIT GUIDE,
Materials Research Society,
p. 413,
Nov. 2012.
Official location
-
Yu Misosaku,
Imanuel Tarigan,
Naoki Takata,
Yoshihiro Terada,
Masao Takeyama.
Creep Behavior of Fe-20Cr-30Ni-2Nb Austenitic Heat Resistant Steels under Steam Atmosphere at 1073 K,
2012 MRS FALL MEETING,
2012 MRS FALL MEETING PROGRAM & EXHIBIT GUIDE,
Materials Research Society,
p. 415,
Nov. 2012.
Official location
-
Naoki Takata,
Hassan Gassemi-Armaki,
Yoshihiro Terada,
Masao Takeyama,
Kumar Shavan.
Effect of Dislocation Sources on Slip in Fe2Nb Laves Phase with Ni in Solution,
2012 MRS FALL MEETING,
2012 MRS FALL MEETING PROGRAM & EXHIBIT GUIDE,
Materials Reseatch Society,
p. 416,
Nov. 2012.
Official location
Domestic Conference (Reviewed)
-
Tetsuya Iwasaki,
Naoki Takata,
YOSHIHIRO TERADA,
MASAO TAKEYAMA.
Sub-grain Evolution during High-Temperature Creep in Fe-20Cr-30Ni Austenitic Steel,
日本鉄鋼協会第167回春季講演大会,
材料とプロセス : 日本鉄鋼協会講演論文集,
日本鉄鋼協会,
Vol. 27,
No. 1,
p. 28,
Mar. 2014.
-
Shuntaro Ida,
Naoki Takata,
YOSHIHIRO TERADA,
MASAO TAKEYAMA.
Precipitation Behavior of δ Phase in Wrought Nickel-Based Superalloy Inconel 718,
日本鉄鋼協会第167回春季講演大会,
材料とプロセス : 日本鉄鋼協会講演論文集,
日本鉄鋼協会,
Vol. 27,
No. 1,
p. 25,
Mar. 2014.
-
F.G. Gao,
Naoki Takata,
Yoshihiro Terada,
Masao Takeyama.
Precipitation and Morphology of Fe2Nb and Ni3Nb Intermetallic Phases in Carbon Free Fe-Cr-Ni-Nb Steels at 1073K,
日本鉄鋼協会第164回秋季講演大会,
材料とプロセス,
日本鉄鋼協会,
Vol. 25,
pp. 1199,
Sept. 2012.
-
Ruihui Zhang,
Naoki Takata,
Yoshihiro Terada,
Masao Takeyama.
Effect of Grain Boundary Misorientation on the Precipitation of Fe2Nb Laves Phase in Fe-20Cr-30Ni-2Nb Steels,
日本鉄鋼協会第164回秋季講演大会,
材料とプロセス,
日本鉄鋼協会,
Vol. 25,
pp. 1201,
Sept. 2012.
-
Taku Hirosawa,
Harumi Inatomi,
Naoki Takata,
Yoshihiro Terada,
Masao Takeyama.
炭素無添加Fe-Cr-Niオーステナイト系耐熱鋼におけるσ相生成と析出形態,
材料とプロセス,
Vol. 25,
pp. 1200,
Sept. 2012.
-
Kousuke Suzuki,
Naoki Takata,
YOSHIHIRO TERADA,
MASAO TAKEYAMA.
Fe-Ni-Nb-M4元系におけるγ-Fe/TCP/GCP相間の相平衡と遷移金属元素の分配,
日本鉄鋼協会第164回秋季講演大会,
材料とプロセス,
日本鉄鋼協会,
Vol. 25,
pp. 1198,
Sept. 2012.
-
Yuu Misosaku,
Takahiro Kimura,
Imanuel Tarigan,
Naoki Takata,
YOSHIHIRO TERADA,
MASAO TAKEYAMA.
Fe-20Cr-30Ni-2Nbオーステナイト系耐熱鋼の水蒸気雰囲気中での1073Kにおけるクリープ特性,
材料とプロセス,
Vol. 25,
pp. 1197,
Sept. 2012.
-
Takahiro Kimura,
Yuu Misosaku,
Imanuel Tarigan,
Naoki Takata,
YOSHIHIRO TERADA,
MASAO TAKEYAMA.
Fe-20Cr-30Ni-2Nbオーステナイト系耐熱鋼の1073Kにおけるクリープに及ぼす粒界Laves相の効果,
日本鉄鋼協会第164回秋季講演大会,
材料とプロセス,
日本鉄鋼協会,
Vol. 25,
pp. 1196,
Sept. 2012.
-
hiromu hisazawa,
Kohki Izumi,
Naoki Takata,
YOSHIHIRO TERADA,
MASAO TAKEYAMA.
鍛造Ni基超合金におけるγ'相の組織形態と格子ミスフィット,
日本鉄鋼協会第164回秋季講演大会,
CAMP-ISIJ,
日本鉄鋼協会,
Vol. 25,
pp. 1112,
Sept. 2012.
-
Kohki Izumi,
YOSHIHIRO TERADA,
MASAO TAKEYAMA.
Ni基鍛造合金におけるγ'相の組織形態に及ぼす格子ミスフィットの影響,
日本金属学会2012春期大会,
日本金属学会講演概要,2012年春期大会,
日本金属学会,
Mar. 2012.
International Conference (Not reviewed / Unknown)
-
Fagang Gao,
Naoki Takata,
Yoshihiro Terada,
Masao Takeyama.
Microstructure of Fe-Cr-Ni-Nb New Austenitic Steels Strengthened by Fe2Nb Phase for Further Advanced USC Power Plant at 1073K,
The 4th Joint Symposium between the School of Materials Science and Engineering of Dalian University of Technology & Department of Metallurgy of Tokyo Institute of Technology,
Abstract Book of the 4th Joint Symposium between the School of Materials Science and Engineering of Dalian University of Technology & Department of Metallurgy of Tokyo Institute of Technology,
pp. 25-27,
Sept. 2012.
-
Imanuel Tarigan,
Naoki Takata,
Yoshihiro Terada,
Masao Takeyama.
Grain Boundary Precipitation Strengthening Mechanism by Fe2Nb Laves Phase in Creep of Fe-20Cr-30Ni-2Nb Austenitic Heat-Resistant Steel,
12th International Conference on Creep and Fracture of Engineering Materials and Structures,
p. 55,
May 2012.
Domestic Conference (Not reviewed / Unknown)
-
hiromu hisazawa,
YOSHIHIRO TERADA,
MASAO TAKEYAMA.
鍛造Ni基超合金におけるγ'析出相の形態評価,
日本学術振興会耐熱金属材料第123委員会11月期討論会,
日本学術振興会耐熱金属材料第123委員会研究報告,
日本学術振興会,
Vol. 56,
No. 3,
pp. 281-290,
Nov. 2015.
-
hiromu hisazawa,
Naoki Takata,
YOSHIHIRO TERADA,
MASAO TAKEYAMA.
Ni基鍛造合金Inconel X-750におけるγ’相形態と格子ミスフィットの関係,
日本学術振興会耐熱金属材料第123委員会7月期研究会,
日本学術振興会耐熱金属材料第123委員会研究報告,
日本学術振興会耐熱金属材料第123委員会,
Vol. 54,
No. 2,
pp. 137-148,
July 2013.
-
Naoki Takata,
Naoya Kanno,
YOSHIHIRO TERADA,
MASAO TAKEYAMA.
粒界をFe2Nb Laves相で被膜したオーステナイト系耐熱鋼の室温靭性と変形,
日本金属学会2013年春期講演大会,
日本金属学会講演概要,
公益社団法人日本金属学会,
Mar. 2013.
-
Mari Yoshihara,
MASAO TAKEYAMA,
YOSHIHIRO TERADA.
Fe-20Cr-30Ni-2Nbオーステナイト系耐熱鋼における引張変形とその場観察,
日本鉄鋼協会2013年第165回春季講演大会,
材料とプロセス : 日本鉄鋼協会講演論文集,
一般社団法人日本鉄鋼協会,
Mar. 2013.
-
Tetsuya Iwasaki,
YOSHIHIRO TERADA,
MASAO TAKEYAMA.
Fe-20Cr-30Niオーステナイト鋼における高温クリープ強度に及ぼす結晶粒界の役割,
日本鉄鋼協会2013年第165回春季講演大会,
材料とプロセス : 日本鉄鋼協会講演論文集,
一般社団法人日本鉄鋼協会,
Mar. 2013.
-
Shuntaro Ida,
YOSHIHIRO TERADA,
MASAO TAKEYAMA.
鋳造Ni基超合金INCONEL718における組織形態時効熱処理の影響,
日本鉄鋼協会2013年第165回春季講演大会,
材料とプロセス : 日本鉄鋼協会講演論文集,
一般社団法人日本鉄鋼協会,
Mar. 2013.
-
Fagang Gao,
Naoki Takata,
Yoshihiro Terada,
Masao Takeyama.
Precipitation of Grain Boundary Fe2Nb Laves Phase at 1073K in Novel Fe-Cr-Ni-Nb Austenitic heat Resistant Steels,
日本金属学会2013年春期講演大会,
日本金属学会講演概要,
公益社団法人日本金属学会,
Mar. 2013.
-
Fagang Gao,
Naoki Takata,
YOSHIHIRO TERADA,
MASAO TAKEYAMA.
Precipitation Kinetics and Morphology of Fe2Nb TCP Phase and Ni3Nb GCP Phase in Novel Fe-Cr-Ni-Nb Austenitic Heat Resistant Steels at 1073 K,
耐熱金属材料第123委員会3月期研究会,
耐熱金属材料第123委員会研究報告,
日本学術振興会耐熱金属材料第123委員会,
Vol. 54,
No. 1,
pp. 19-32,
Mar. 2013.
-
Yuu Misosaku,
unknown unknown,
Naoki Takata,
YOSHIHIRO TERADA,
MASAO TAKEYAMA.
Fe-20Cr-30Ni-2Nbオーステナイト系耐熱鋼の1073 Kにおける水蒸気雰囲気下でのクリープ特性,
耐熱金属材料第123委員会3月期研究会,
耐熱金属材料第123委員会研究報告,
日本学術振興会耐熱金属材料第123委員会,
Vol. 54,
No. 1,
pp. 7-18,
Mar. 2013.
-
Naoki Takata,
Naoya Kanno,
Ruihui Zhang,
Yoshihiro Terada,
Masao Takeyama,
Sharvan Kumar.
オーステナイト系耐熱鋼におけるFe2Nb Laves相の強化相としての役割,
日本金属学会2012秋期大会,
日本金属学会講演概要,2012年秋期大会,
日本金属学会,
Sept. 2012.
-
hiromu hisazawa,
Kohki Izumi,
YOSHIHIRO TERADA,
MASAO TAKEYAMA.
Ni基鍛造合金INCONEL X-750におけるγ’相の析出形態と格子ミスフィット,
第73回日本熱処理技術協会講演大会,
第73回日本熱処理技術協会講演大会講演概要集,
日本熱処理技術協会,
pp. 21-22,
June 2012.
-
Taku Hirosawa,
Harumi Inatomi,
Naoki Takata,
YOSHIHIRO TERADA,
MASAO TAKEYAMA.
Fe-Cr-Niオーステナイト耐熱鋼におけるα相の生成と析出形態,
第73回日本熱処理技術協会講演大会,
第73回日本熱処理技術協会講演大会講演概要集,
日本熱処理技術協会,
pp. 23-24,
June 2012.
-
Takahiro Kimura,
Yuu Misosaku,
unknown unknown,
Naoki Takata,
YOSHIHIRO TERADA,
MASAO TAKEYAMA.
金属間化合物を強化相とするFe-Cr-Ni-Nb系オーステナイト系耐熱鋼の1073Kにおけるクリープ,
第73回日本熱処理技術協会講演大会,
第73回日本熱処理技術協会講演大会後援概要集,
日本熱処理技術協会,
pp. 11-12,
June 2012.
-
hiromu hisazawa,
YOSHIHIRO TERADA,
MASAO TAKEYAMA.
鍛造Ni基超合金におけるγ'相の析出形態と格子ミスフィット,
日本鉄鋼協会第163回春季講演大会,
日本鉄鋼協会第163回春季講演大会講演概要集,
日本鉄鋼協会,
Mar. 2012.
-
柴山淳史,
YOSHIHIRO TERADA,
村田純教,
森永正彦.
Mg-Ca系鋳造合金における高温クリープ強度に及ぼすAl添加の影響,
第20回学生による材料フォーラム,
Nov. 2010.
-
柴山淳史,
YOSHIHIRO TERADA,
村田純教,
森永正彦.
Mg-Ca二元系鋳造合金の高温クリープ変形,
日本金属学会2010春期大会,
日本金属学会講演概要,
日本金属学会,
Vol. 146,
pp. 424,
Mar. 2010.
-
新谷剛志,
柴山淳史,
村田純教,
YOSHIHIRO TERADA,
森永正彦.
Mg合金におけるX線プロファイルを用いた転位密度解析,
日本金属学会2010春期大会,
日本金属学会講演概要,
日本金属学会,
Vol. 146,
pp. 423,
Mar. 2010.
Other Publication
-
Kohki Izumi,
YOSHIHIRO TERADA,
MASAO TAKEYAMA.
Ni基鍛造合金におけるγ'相の組織安定性に及ぼす格子ミスフィットの影響,
耐熱金属材料123委員会研究報告,
Vol. 52,
No. 3,
pp. 363-374,
Nov. 2011.
-
杉岡真伍,
山下浩司,
YOSHIHIRO TERADA,
村田純教.
Fe-Crの相互拡散に及ぼす第三元素の効果,
耐熱金属材料123委員会研究報告,
Vol. 51,
No. 3,
pp. 211-217,
Nov. 2010.
-
YOSHIHIRO TERADA,
伊藤大吾,
TATSUO SATO.
Mg-Al-Caダイカスト合金におけるクリープ中の転位組織解析,
耐熱金属材料123委員会研究報告,
Vol. 50,
No. 2,
pp. 229-235,
July 2009.
-
徳本壮男,
前田 晋,
YOSHIHIRO TERADA,
松尾 孝.
[001]方位を持つγ単相Ni-20mass%Cr合金単結晶の低応力におけるクリープ,
耐熱金属材料123委員会研究報告,
Vol. 45,
No. 2,
pp. 175-182,
2004.
-
YOSHIHIRO TERADA,
里 達雄.
AM50系マグネシウムダイカスト合金におけるクリープ強化機構,
耐熱金属材料123委員会研究報告,
Vol. 45,
No. 3,
pp. 227-233,
2004.
-
中元能郎,
YOSHIHIRO TERADA,
松尾 孝.
[001]方位を持つNi-20Cr合金単結晶におけるクリープの応力依存性,
耐熱金属材料第123委員会研究報告,
Vol. 43,
No. 1,
pp. 55-65,
2002.
-
三浦誠司,
寺田芳弘,
毛利哲雄.
Rh基L12金属間化合物の熱物性と機械的性質,
まてりあ,
Vol. 40,
No. 3,
pp. 224-228,
2001.
-
三浦誠司,
寺田芳弘,
毛利哲雄.
Ir,Rh基L12金属間化合物の熱的性質(熱膨張係数、熱伝導率),
白金族金属・合金の現状と将来,
pp. 21-24,
2000.
-
三浦誠司,
寺田芳弘,
毛利哲雄.
Ir, Rh基L12金属間化合物 熱膨張係数,熱伝導率,
Boundary,
Vol. 16,
No. 5,
pp. 7-11,
2000.
-
大久保賢二,
寺田芳弘,
毛利哲雄,
鈴木朝夫.
レーザーフラッシュ法により計測した熱伝導率の信頼性,
ULVAC Tech. J.,
Vol. 47,
pp. 20-26,
1997.
-
大久保賢二,
YOSHIHIRO TERADA,
毛利哲雄,
鈴木朝夫.
レーザーフラッシュ法による熱伝導率データの信頼性におよぼす試験片の状態の影響,
北海道大学工学部研究報告,
Vol. 175,
pp. 97-106,
1995.
-
間篠謙一,
YOSHIHIRO TERADA,
松尾 孝,
菊池 実.
TiAlの高温クリープにおける最小クリープ速度の結晶粒径依存性,
耐熱金属材料123委員会研究報告,
Vol. 34,
No. 2,
pp. 205-213,
1993.
-
YOSHIHIRO TERADA,
米谷 暢,
松尾 孝,
菊池 実.
Moを添加したNi-20Cr合金における最小クリープ速度の結晶粒径依存性,
耐熱金属材料123委員会研究報告,
Vol. 33,
No. 3,
pp. 323-333,
1992.
-
YOSHIHIRO TERADA,
松尾 孝,
菊池 実.
ボロンを添加したNi-20Cr合金の加速クリープ域におけるサブグレインの発達,
耐熱金属材料123委員会研究報告,
Vol. 31,
No. 2,
pp. 93-101,
1990.
-
石井龍一,
YOSHIHIRO TERADA,
松尾 孝,
菊池 実.
Inconel617における炭化物による粒界析出強化,
耐熱金属材料123委員会研究報告,
Vol. 30,
No. 2,
pp. 159-168,
1989.
-
平井龍至,
YOSHIHIRO TERADA,
松尾 孝,
菊池 実.
Zr添加Ni-20Cr合金の高温クリープ抵抗に及ぼすサブグレインサイズの影響,
耐熱金属材料123委員会研究報告,
Vol. 29,
No. 3,
pp. 275-285,
1988.
[ Save as BibTeX ]
[ Paper, Presentations, Books, Others, Degrees: Save as CSV
]
[ Patents: Save as CSV
]
|