@article{CTT100683209,
  author = {Yoshihiro Morimoto and Dongjue He and Wataru Hijikata and Tadahiko Shinshi and Takahiro Nakai and Naoyuki Nakamura},
  title = {Effect of high-frequency orbital and vertical oscillations of the laser focus position on the quality of the cut surface in a thick plate by laser beam machining},
  journal = {Precision Engineering},
  year = 2015,
}

@article{CTT100648360,
  author = {Dongjue He and Tadahiko Shinshi and Takahiro Nakai},
  title = {Development of a maglev lens driving actuator for off-axis control and adjustment of the focal point in laser beam machining},
  journal = {Precision Engineering},
  year = 2013,
}

@article{CTT100631570,
  author = {Dongjue HE and Tadahiko SHINSHI and Xiaoyou ZHANG and Takashi YUZAWA and Tatsushi SATO},
  title = {Improving the Speed of Small Deep Hole Electrical Discharge Machining by Combining Rotation of the Electrode with a Rapid-Response},
  journal = {Journal of Advanced Mechanical Design,Systems,and Manufacturing},
  year = 2011,
}

@article{CTT100604793,
  author = {Dongjue He and Hiroki Morita and Xiaoyou Zhang and Tadahiko Shinshi and Takayuki Nakagawa and Tatsusi Sato and Hidetaka Miyake},
  title = {Developement of a novel 5-DOF controlled maglev local actuator for high-speed electrical discharge machining},
  journal = {Precision Engineering},
  year = 2010,
}

@inproceedings{CTT100691552,
  author = {Tadahiko Shinshi and Yoshihiro Morimoto and Dongjue He and Wataru Hijikata and Takahiro Nakai and Naoyuki Nakamura},
  title = {A MAGLEV LENS DRIVING ACTUATOR FOR HIGH-FREQUENCY AND MULTI-DOF LASER FOCUS POSITIONING IN LASER BEAM CUTTING},
  booktitle = {Proceedings of 2015 JSME-IIP/ASME-ISPS Joint Conference on Micromechatronics for Information and Precision Equipment (MIPE 2015)},
  year = 2015,
}

@inproceedings{CTT100644037,
  author = {He Dongjue and 森本 貴景 and 進士 忠彦 and 中井 孝洋 and 藤川 周一},
  title = {レーザ加工用高速・多自由度磁気浮上アクチュエータ},
  booktitle = {2012年度精密工学会秋季大会学術講演会講演論文集},
  year = 2012,
}

@inproceedings{CTT100619330,
  author = {Dongjue HE and Tadahiko SHINSHI and Xiaoyou ZHANG and Takashi YUZAWA and Tatsushi SATO},
  title = {Micro Hole Electrical Discharge Machining Assisted by a Multi-DOF and High-Responce Maglev Local Actuator},
  booktitle = {The 6th International Conference on MicroManufacturing ICOMM/2011},
  year = 2011,
}

@inproceedings{CTT100615027,
  author = {Dongjue He and Tadahiko Shinshi and Xiaoyou Zhang and Takashi Yuzawa and Tatsushi Sato},
  title = {High Speed Electrical Discharge Machining Using a Combination of 5-DOF Controlled Maglev Actuator and Conventional EDM Machine},
  booktitle = {Proceedings of The Twenty-fifth Annual Meeting of The American Society for Precision Engineering},
  year = 2010,
}

@inproceedings{CTT100614378,
  author = {進士 忠彦 and 上山 吉崇 and HeDongjue and 張 暁友 and 湯澤 隆 and 佐藤 達志},
  title = {多自由度磁気浮上アクチュエータを用いた高速・高精度放電加工の研究},
  booktitle = {第14回国際工作機械技術者会議論文集（ポスターセッション論文抜粋版）},
  year = 2010,
}

@inproceedings{CTT100612517,
  author = {上山吉崇 and HE Dongjue and 進士忠彦 and 湯澤隆 and 佐藤達志 and 張暁友},
  title = {磁気軸受を用いた放電加工用回転電極の取り付け誤差補正},
  booktitle = {2010年度精密工学会秋季大会学術講演会講演論文集},
  year = 2010,
}

@inproceedings{CTT100611613,
  author = {Dongjue He and Tadahiko Shinshi and Xiaoyou Zhang},
  title = {Cooperative Control of a Maglev Local Actuator with a Conventional EDM Machine for High Speed Electrical Discharge Machining},
  booktitle = {Proceedings of the Twelfth International Symposium on Magnetic Bearings},
  year = 2010,
}

@misc{CTT100725896,
  author = {Dongjue He},
  title = {High speed and multi-DOF maglev actuators for electrical discharge machining and laser beam machining},
  year = 2012,
}



@phdthesis{CTT100725896,
  author = {Dongjue He},
  title = {High speed and multi-DOF maglev actuators for electrical discharge machining and laser beam machining},
  school = {東京工業大学},
  year = 2012,
}