@book{CTT100401547,
  author = {手塚裕康(分担)},
  title = {ダイカスト百科事典(社団法人日本ダイカスト協会編)},
  publisher = {株式会社軽金属通信ある社},
  year = 2005,
}

@book{CTT100546763,
  author = {ダイカスト用アルミニウム合金委員会編 and 手塚裕康},
  title = {アルミニウム合金ダイカスト(ADC3)の諸性質に及ぼすSiの研究},
  publisher = {社団法人日本ダイカスト協会},
  year = 2005,
}

@book{CTT100546764,
  author = {ダイカスト用アルミニウム合金委員会編 and 手塚裕康},
  title = {アルミニウム合金ダイカスト(JISH5302)のTiの許容限に関する研究},
  publisher = {社団法人日本ダイカスト協会},
  year = 2005,
}

@book{CTT100476876,
  author = {手塚裕康 and 他78名},
  title = {鋳造工学便覧 日本鋳造工学会編},
  publisher = {丸善株式会社},
  year = 2002,
}

@book{CTT100476875,
  author = {手塚裕康 and 他5名},
  title = {引裂試験によるAC4CH合金鋳物の簡易靱性評価},
  publisher = {(社)日本鋳造工学会},
  year = 2002,
}

@book{CTT100446464,
  author = {手塚裕康},
  title = {高圧鋳造アルミニウム合金鋳物の品質に及ぼす鋳造条件と溶湯特性の影響},
  publisher = {（社）軽金属学会研究部会報告書},
  year = 2000,
}

@article{CTT100694167,
  author = {Yorina S. F. Lantang and Equo Kobayashi and Hiroyasu Tezuka and a Tatsuo Sato},
  title = {Effects of Macro- and Micro-Porosity on Mechanical Properties of a Porous Ti-6Al-4V Alloy Fabricated Using Solid-State Space-Holder Method},
  journal = {MATERIALS TRANSACTIONS},
  year = 2014,
}

@article{CTT100670254,
  author = {里 達雄 and Than Trong  Long and 手塚裕康 and 神尾彰彦 and 高橋恒夫},
  title = {Al-Cu合金強制固溶体における周期構造の形成},
  journal = {日本金属学会誌},
  year = 2014,
}

@article{CTT100672660,
  author = {Zhijun Zhang and Hiroyasu Tezuka and Equo Kobayashi and Tatsuo Sato},
  title = {Effects of the Mn/Fe Ratio and Cooling Rate on the Modification of Fe},
  journal = {Materials Transactions},
  year = 2013,
}

@article{CTT100666228,
  author = {古田 遼 and 里 達雄 and 小林郁夫 and 手塚裕康},
  title = {Cu-Ti合金の時効硬化に及ぼすB添加の影響},
  journal = {銅と銅合金},
  year = 2013,
}

@article{CTT100672659,
  author = {C Phongphisutthinan and Hiroyasu Tezuka and Equo Kobayashi and Tatsuo Sato},
  title = {Effects of β-Mg2Si Precipitates on Semi-Solid Microstructures of Wrought Al-Mg-Si Based Alloys Produced by Deformation-Semi-Solid-Forming Process},
  journal = {Materials Transactions},
  year = 2013,
}

@article{CTT100672657,
  author = {SeongNyeong Kim and JaeHwang Kim and Hiroyasu Tezuka and Equo Kobayashi and Tatsuo Sato},
  title = {Formation Behavior of Nanoclusters in Al-Mg-Si Alloys with Different Mg and Si Concentration},
  journal = {Materials Transactions},
  year = 2013,
}

@article{CTT100661445,
  author = {T Hasebe and E Kobayash and H Tezuka and T Sato},
  title = {Effects of sintering conditions on mechanical properties of biomedical porous Ti fabricated by Spark Plasma Sintering},
  journal = {Japanese Journal of Applied Physics},
  year = 2013,
}

@article{CTT100694182,
  author = {里 達雄 and 手塚 裕康 and 小林 郁夫},
  title = {Development of Nano-hetero Structure Aluminum Alloys by Practical Use of Iron and Their Properties},
  journal = {鉄と鋼},
  year = 2012,
}

@article{CTT100672655,
  author = {YeLim Kim and Hiroyasu Tezuka and Equo Kobayashi and Tatsuo Sato},
  title = {Effect of Ca Addition on Precipitation Behavior of Mg-6.0mass%Zn-3.0mass%Al Alloy},
  journal = {Materials Transactions A},
  year = 2012,
}

@article{CTT100643532,
  author = {YeLim Kim and HIROYASU TEZUKA and Tatsuo Sato},
  title = {Effect of Ca Addition on Precipitation Behavior of Mg－6.0 mass％Zn－3.0mass％Al Alloy},
  journal = {Materials Transactions},
  year = 2012,
}

@article{CTT100672653,
  author = {J Kim and Hiroyasu Tezuka and Equo Kobayashi and Tatsuo Sato},
  title = {Effects of Cu and Ag Addition on Nanocluster Formation Behavior in Al-Mg-Si Alloys},
  journal = {Korean Journal of Materials Research},
  year = 2012,
}

@article{CTT100672654,
  author = {C Phongphisutthinan and Hiroyasu Tezuka and Tatsuo Sato and S Takamori and Y Ohsawa},
  title = {Caliber rolling process and mechanical properties of high Fe-containing Al-Mg-Si alloys},
  journal = {Materials Transactions A},
  year = 2012,
}

@article{CTT100672628,
  author = {Ye-Lim Kim and Hiroyasu Tezuka and Equo Kobayashi and Tatsuo Sato},
  title = {Effect of Al addition on the precipitation behavior of a binary Mg-Zn alloy},
  journal = {Korean J. Mater. Research},
  year = 2012,
}

@article{CTT100634419,
  author = {Hyun Bom Lee and HIROYASU TEZUKA and Equo Kobayashi and TATSUO SATO and Kee Do Woo},
  title = {Fabrication and Mechanical Properties of Al-Based In Situ Nano-Composites Reinforced by Al2O3 and Intermetallic Compounds},
  journal = {Materials Transactions},
  year = 2012,
}

@article{CTT100661449,
  author = {里達雄 and 手塚裕康 and 小林郁夫},
  title = {鉄を活用したナノヘテロ構造アルミニウム合金の創製と材料特性},
  journal = {ふぇらむ : 日本鉄鋼協会会報},
  year = 2012,
}

@article{CTT100672625,
  author = {Chakkrist Phongphisutthinan and Hiroyasu Tezuka and Tatsuo Sato},
  title = {Semi-Solid Microstructure Control of Wrought Al-Mg-Si Based Alloys with Fe and Mn Additions in Deformation-Semi-Solid-Forming Process},
  journal = {Materials Transations},
  year = 2011,
}

@article{CTT100672478,
  author = {R. Hu and T. Ogura and H. Tezuka and Tatsuo Sato and Q. Liu},
  title = {Dispersoid Formation and Recrystallization Behavior in an Al-Mg-Si-Mn Alloy},
  journal = {Journal of Materials Science and Technology},
  year = 2010,
}

@article{CTT100672384,
  author = {M.Yabushita and T.Goda and Y.Ono and TatsuoSato and K.Oda and M.Shioda and HIROYASU TEZUKA},
  title = {Evaluation of Young's modulus of high stiffness aluminium die cast alloys using nanoindentation technique},
  journal = {International Journal of Cast Metals Research},
  year = 2008,
}

@article{CTT100585186,
  author = {HIROYASU TEZUKA},
  title = {Effects of homogenization conditions on semi-solid microstructures of Al-Mg-Si-Mn alloys produced by D-SSF process},
  journal = {International journal of cast metals research},
  year = 2008,
}

@article{CTT100563323,
  author = {HIROYASU TEZUKA},
  title = {Effects of Cr and Cr/Mn Combined Additions on Semi-Solid Microstructures of Al-Mg-Si Alloys Produced by D-SSF Process.},
  journal = {Journal of Materials Science & Technology},
  year = 2008,
}

@article{CTT100395510,
  author = {Peyman Ashitari and Hiroyasu Tezuka and Tatsuo Sato},
  title = {Modification of Fe-containing intermetallic compounds by K addition to Fe-rich AA319 aluminum alloys},
  journal = {Scripta Materialia},
  year = 2005,
}

@article{CTT100395509,
  author = {里達雄 and 上野仁士 and 手塚裕康},
  title = {加工ｰ半溶融鋳造プロセスによるAl-Si-Cu-Fe合金の組織制御と機械的性質の改善},
  journal = {鋳造工学},
  year = 2005,
}

@article{CTT100503775,
  author = {アシタリ　ペイマン and 手塚裕康 and 里達雄},
  title = {Modification of hte Fe-containing intermetallic compounds by Sr,Mn and Li additions in Al-Si-Cu-Fe cast alloys},
  journal = {Collected Abstracts of the 2004 Spring Meeting of the Japan Institute of Metals},
  year = 2004,
}

@article{CTT100503778,
  author = {上野仁士 and 手塚裕康 and 里達雄},
  title = {Al-7Si-3Cu-1Fe合金の半溶融凝固組織と熱間圧延条件との関係},
  journal = {日本鋳造工学会第144回全国講演大会講演概要集},
  year = 2004,
}

@article{CTT100503779,
  author = {手塚裕康 and ぺイマン　アシタリ and 里達雄},
  title = {Al-Si-Cu-Fe合金鋳造材の晶出相形態に及ぼすカリウムの影響},
  journal = {日本鋳造工学会第145回全国講演大会講演概要集},
  year = 2004,
}

@article{CTT100503785,
  author = {茂泉健 and 手塚裕康 and 里達雄},
  title = {Al-Si-Mg-Cu系鋳造合金の熱疲労寿命に及ぼす共晶Si組織の影響},
  journal = {軽金属学会第107回秋期大会講演概要},
  year = 2004,
}

@article{CTT100503786,
  author = {石川達也 and 手塚裕康 and 里達雄},
  title = {AZ31マグネシウム合金のミクロ組織と機械的性質に及ぼす熱間圧延条件の影響},
  journal = {軽金属学会第107回秋期大会講演概要},
  year = 2004,
}

@article{CTT100504083,
  author = {Peyman Ashtari and Hiroyasu Tezuka and Tatsuo Sato},
  title = {Modification of Fe-containing intermetallic compounds in an Al-Si-Cu-Fe cast alloy using Sr,Li and Mn additions},
  journal = {Proceedings of the 9th Internatinal Conference on Aluminium Alloys},
  year = 2004,
}

@article{CTT100503776,
  author = {茂泉健 and 手塚裕康 and 里達雄},
  title = {シリンダヘッド用Al-Si-Mg系鋳造合金の機械的性質と熱疲労寿命に及ぼすCu,Mg添加の影響},
  journal = {日本鋳造工学会第144回全国講演大会講演概要集},
  year = 2004,
}

@article{CTT100503928,
  author = {茂泉健 and 手塚裕康 and 里達雄},
  title = {Al-Si-Mg-Cu系鋳造合金の熱疲労寿命に及ぼす析出硬化および共晶Si組織の影響},
  journal = {軽金属},
  year = 2004,
}

@article{CTT100503927,
  author = {P.Ashtari and H.Tezuka and T.Sato},
  title = {Influence of Li addition on intermetallic compound morphologies in Al-Si-Cu-Fe cast alloys},
  journal = {Scripta Materialia},
  year = 2004,
}

@article{CTT100493521,
  author = {吉田晃 and 手塚裕康 and 里達雄},
  title = {ECAP加工を施したAl-7%Si-0.35%Mg合金の半溶融鋳造組織と機械的性質},
  journal = {日本鋳造工学会第142回全国講演大会講演概要集},
  year = 2003,
}

@article{CTT100493527,
  author = {長谷佳紀 and 茂泉健 and 手塚裕康 and 里達雄},
  title = {Al-Si-Mg-Cu鋳造合金の熱疲労寿命に及ぼす共晶Si組織の影響},
  journal = {軽金属学会第105回秋期大会講演概要},
  year = 2003,
}

@article{CTT100493526,
  author = {茂泉健 and 手塚裕康 and 里達雄},
  title = {Al-Si-Mg-Cu鋳造合金の時効硬化と熱疲労寿命との関係},
  journal = {軽金属学会第105回秋期大会講演概要},
  year = 2003,
}

@article{CTT100493525,
  author = {上野仁士 and 里達雄 and 手塚裕康},
  title = {熱間圧延を施したAl-7%Si-3%Cu-1%Fe合金の半溶融凝固組織},
  journal = {日本鋳造工学会第143回全国講演大会講演概要集},
  year = 2003,
}

@article{CTT100493524,
  author = {尾崎千宝 and 里達雄 and 手塚裕康},
  title = {アルミニウム合金のミクロ組織の定量化と機械的性質},
  journal = {日本鋳造工学会第143回全国講演大会講演概要集},
  year = 2003,
}

@article{CTT100493523,
  author = {アシタリ ペイマン and 手塚裕康 and 里達雄},
  title = {Influence of Li addition on intermetallic compound morphologies in Al-Si-Cu-Fe cast alloys.},
  journal = {Reports of the 143rd JFS Meeting},
  year = 2003,
}

@article{CTT100493522,
  author = {尾崎千宝 and 里達雄 and 手塚裕康},
  title = {Al-7%Si合金の機械的性質に及ぼすミクロ組織の影響},
  journal = {日本鋳造工学会第142回全国講演大会講演概要集},
  year = 2003,
}

@article{CTT100539729,
  author = {茂泉健 and 手塚裕康 and 里達雄},
  title = {Cuを添加したAC4Cアルミニウム鋳造合金の析出組織と熱疲労寿命},
  journal = {軽金属},
  year = 2003,
}

@article{CTT100539844,
  author = {Jung-Moo Lee and Suk-Bong Kang and Tatsuo Sato and Hiroyasu Tezuka and Akihiko Kamio},
  title = {Fabrication of Al/Al3Fe composites by plasma synthesis method},
  journal = {Materials Science and Engineering A},
  year = 2003,
}

@article{CTT100539727,
  author = {茂泉健 and 手塚裕康 and 里達雄},
  title = {シリンダヘッド用Al-Si-Mg系鋳造合金の機械的性質と熱疲労寿命に及ぼすCu,Mg添加の影響},
  journal = {鋳造工学},
  year = 2003,
}

@article{CTT100539725,
  author = {Peyman Ashtari and Hiroyasu Tezuka and Tatsuo Sato},
  title = {Influence of Sr and Mn additions on intermetallic compound morphologies in Al-Si-Cu-Fe cast alloys},
  journal = {Materials Transactions},
  year = 2003,
}

@article{CTT100539722,
  author = {Jung-Moo Lee and Suk-Bong Kang and Tatsuo Sato and Hiroyasu Tezuka and Akihiko Kamio},
  title = {Evolution of iron aluminide in Al/Fe in situ composites fabricated by plasma synthesis method},
  journal = {Materials Science and Engineering A},
  year = 2003,
}

@article{CTT100672249,
  author = {Jung-Moo Lee and Suk-Bong Kang and Tatsuo Sato and Hiroyasu Tezuka and Akihiko Kamio},
  title = {Dry Sliding Wear Behavior of A2218/Al3Fe Composites Fabricated by Plasma Synthesis Method},
  journal = {Materials Transacions},
  year = 2002,
}

@article{CTT100476871,
  author = {松崎雅史 and 手塚裕康 and 里達雄},
  title = {純アルミニウムの結晶粒微細化におけるボロンの役割},
  journal = {日本鋳造工学会第141回全国講演大会講演概要集},
  year = 2002,
}

@article{CTT100476872,
  author = {手塚裕康 and 坂井知典 and 里達雄 and 神尾彰彦},
  title = {Cu-Sn-Zn合金の半溶融加圧凝固組織},
  journal = {第42回銅及び銅合金技術研究会講演会講演概要集},
  year = 2002,
}

@article{CTT100476873,
  author = {K.Moizumi and K.Mine and H.Tezuka and T.Sato},
  title = {Influence of precipitate microstructures on thermal fatigue properties of Al-Si-Mg cast alloys.},
  journal = {Materials Science Forum Proc. of ICAA8},
  year = 2002,
}

@article{CTT100476865,
  author = {吉田晃 and 手塚裕康 and 里達雄},
  title = {AC4CH合金半溶融組織制御へのECAP加工法の適用},
  journal = {軽金属学会第102回春期大会講演概要},
  year = 2002,
}

@article{CTT100476866,
  author = {茂泉健 and 手塚裕康 and 里達雄},
  title = {Al-Mg-Si系鋳造合金の熱疲労挙動に及ぼすミクロ組織の影響},
  journal = {軽金属学会第103回秋期大会講演概要},
  year = 2002,
}

@article{CTT100476867,
  author = {アシタリ　ペイマン and 手塚裕康 and 里達雄},
  title = {Al-Si-Cu-Fe鋳造合金の金属間化合物形態に及ぼすSr及びMnの影響},
  journal = {軽金属学会第103回秋期大会講演概要},
  year = 2002,
}

@article{CTT100476868,
  author = {福田正 and 手塚裕康 and 里達雄},
  title = {熱間圧延および焼なまし条件により組織制御したAZ31合金の機械的性質},
  journal = {軽金属学会第103回秋期大会講演概要},
  year = 2002,
}

@article{CTT100476869,
  author = {松崎雅史 and 手塚裕康 and 里達雄},
  title = {Al-B系化合物によるアルミニウムの結晶粒微細化},
  journal = {日本鋳造工学会第140回全国講演大会講演概要集},
  year = 2002,
}

@article{CTT100476870,
  author = {能本和幸 and 手塚裕康 and 里達雄 and 神尾彰彦},
  title = {加工を施したAl-7%Si-3%Cu-1%Fe合金の半溶融鋳造組織と機械的性質},
  journal = {日本鋳造工学会第140回全国講演大会講演概要集},
  year = 2002,
}

@article{CTT100538572,
  author = {J-M.Lee and S-B.Kang and T.Sato and H.Tezuka and A.Kamio},
  title = {Microstructures and mechanical properties of Al3Fe reinforced aluminum matrix composites fabricated by a plusma synthesis method},
  journal = {Materials Transactions,JIM},
  year = 2002,
}

@article{CTT100456081,
  author = {吉田晃 and 手塚裕康 and 里達雄 and Ki-Seung　Lee and Si-Young　Chang and Dong-Hyuk　Shin},
  title = {ECAP加工を施したAC4CH合金の半溶融組織制御},
  journal = {日本鋳造工学会第139回全国講演大会講演概要集},
  year = 2001,
}

@article{CTT100456078,
  author = {田渕満智 and 手塚裕康 and 里達雄 and 神尾彰彦},
  title = {半溶融プロセスによるMg-Zn-Zr合金のα-Mg相の組織制御},
  journal = {日本鋳造工学会第139回全国講演大会講演概要集},
  year = 2001,
}

@article{CTT100456079,
  author = {能本和幸 and 手塚裕康 and 里達雄 and 神尾彰彦},
  title = {高濃度の鉄を含むAC4B合金の半溶融プロセスによる組織制御},
  journal = {日本鋳造工学会第139回全国講演大会講演概要集},
  year = 2001,
}

@article{CTT100456083,
  author = {茂泉健 and 峯憲一郎 and 手塚裕康 and 里達雄},
  title = {AC4Cアルミニウム合金のミクロ組織と熱疲労挙動},
  journal = {軽金属学会第101回秋期大会講演概要},
  year = 2001,
}

@article{CTT100456082,
  author = {茂泉健 and 峯憲一郎 and 手塚裕康 and 里達雄},
  title = {ディーゼルエンジン用シリンダヘッドに適するAl-Si-Mg系鋳造合金の開発},
  journal = {日本鋳造工学会第139回全国講演大会講演概要集},
  year = 2001,
}

@article{CTT100456080,
  author = {里達雄 and 吉田晃 and 手塚裕康},
  title = {圧延及びECAP加工によりひずみ導入したAl-Si系合金の半溶融凝固組織},
  journal = {日本鋳造工学会第139回全国講演大会講演概要集},
  year = 2001,
}

@article{CTT100446467,
  author = {谷口兼一 and 手塚裕康 and 里達雄 and 神尾彰彦},
  title = {Siを含有するアルミニウム合金におけるボロン添加による結晶粒微細化},
  journal = {日本鋳造工学会第136回全国講演大会講演概要集},
  year = 2000,
}

@article{CTT100446466,
  author = {神尾彰彦 and 里達雄 and 手塚裕康},
  title = {アルミニウム合金及び銅合金の凝固における初晶組織の形成挙動},
  journal = {日本鋳造工学会第136回全国講演大会講演概要集},
  year = 2000,
}

@article{CTT100446465,
  author = {小泉雅史 and 里達雄 and 手塚裕康 and 神尾彰彦},
  title = {Al-Si合金におけるミクロ組織因子と機械的性質の関係},
  journal = {軽金属学会第98回春期大会講演概要},
  year = 2000,
}

@article{CTT100446611,
  author = {坂井知典 and 手塚裕康 and 里達雄 and 神尾彰彦},
  title = {半溶融加圧鋳造法による青銅合金のミクロ組織制御},
  journal = {日本鋳造工学会第137回全国講演大会講演概要集},
  year = 2000,
}

@article{CTT100446610,
  author = {田渕満智 and 手塚裕康 and 里達雄 and 神尾彰彦},
  title = {Mg-Zn-Zr合金の半溶融組織制御},
  journal = {日本鋳造工学会第137回全国講演大会講演概要集},
  year = 2000,
}

@article{CTT100446612,
  author = {能本和幸 and 手塚裕康 and 里達雄 and 神尾彰彦},
  title = {AC4B合金における鉄系化合物の晶出形態に及ぼす鋳造条件の影響},
  journal = {日本鋳造工学会第137回全国講演大会講演概要集},
  year = 2000,
}

@article{CTT100672250,
  author = {Kenichi Yaguchi and Hiroyasu Tezuka and Tatsuo Sato and Akihiko Kamio},
  title = {Grain Refinement of Cast Al Alloys by Al-B Master Alloy},
  journal = {Materials Science Forum},
  year = 2000,
}

@article{CTT100537687,
  author = {Si-Young Chang and Dong Hyuk Shin and Atsushi Fukatsu and Hiroyasu Tezuka and Akihiko Kamio},
  title = {Growth of Primary α Phase in the Semi-Solid State Mg-Zn-Ca-Zr Alloy},
  journal = {Materials Trans.,JIM},
  year = 2000,
}

@article{CTT100546762,
  author = {前川　淳 and 庄司泰輔 and 李　禎茂 and 里　達雄 and 神尾彰彦 and 姜　石峯 and 手塚裕康},
  title = {SiCp/Al-Si系合金複合材料の半溶融高圧鋳造},
  journal = {日本金属学会第125回秋期大会講演概要},
  year = 1999,
}

@article{CTT100430049,
  author = {手塚裕康},
  title = {結晶粒微細化したCu-Sn-Zn合金の半溶融加圧凝固},
  journal = {日本鋳造工学会第135回全国講演大会講演概要集},
  year = 1999,
}

@article{CTT100430048,
  author = {手塚裕康},
  title = {マンガン及び鉄添加量を変化させたAl-7%Si-3%Cu合金の半溶融加圧鋳造組織},
  journal = {日本鋳造工学会第134回全国講演大会講演概要集},
  year = 1999,
}

@article{CTT100430047,
  author = {手塚裕康},
  title = {ボロン添加によるアルミニウム合金の結晶粒微細化効果に対するSiの影響},
  journal = {軽金属学会第96回春期大会講演概要},
  year = 1999,
}

@article{CTT100430035,
  author = {手塚裕康},
  title = {Al-Si合金における組織形態の画像解析法による定量化と機械的性質の関係},
  journal = {日本鋳造工学会第135回全国講演大会講演概要集},
  year = 1999,
}

@article{CTT100429572,
  author = {手塚裕康},
  title = {SiCp/Al-Si系合金複合材料の半溶融高圧鋳造},
  journal = {日本金属学会第125回秋期講演大会講演概要},
  year = 1999,
}

@article{CTT100537269,
  author = {HIROYASU TEZUKA},
  title = {Tensile Behavior of Mg-Zn-Ca-Zr Alloys Forged in Semi-Solid State},
  journal = {Materials Transactions,JIM},
  year = 1999,
}

@article{CTT100537270,
  author = {HIROYASU TEZUKA},
  title = {Microstructural Changes in Al-Cu-Mn Alloys Reinforced with SiC Particles on Holding at High Temperature},
  journal = {Materials Transactions,JIM},
  year = 1999,
}

@article{CTT100672241,
  author = {Mingyi Zheng and Kun Wu and Congkai Yao and Tatsuo Sato and Hiroyasu Tezuka and Akihiko Kamio and D.X.Li},
  title = {Interfacial bond between SiCw and Mg in squeeze cast SiCw/Mg composites},
  journal = {Materials Letters},
  year = 1999,
}

@article{CTT100672239,
  author = {鄭  秉準 and 里 達雄 and 手塚裕康 and 神尾彰彦 and 才川清二 and 中井清之},
  title = {半溶融凝固法により製造したAl-7%Si-0.5%Mg合金の微細組織と機械的性質},
  journal = {軽金属},
  year = 1998,
}

@article{CTT100430041,
  author = {HIROYASU TEZUKA},
  title = {Semi-Solid Solidification Structure in Grain-Refined Al-7%Si-3%Cu Alloy},
  journal = {Aluminum Alloys Their Physical and Mechanical Properties ,Proceedings of the 6th International Conference},
  year = 1998,
}

@article{CTT100430042,
  author = {HIROYASU TEZUKA},
  title = {High Temperature Tensile Properties of SiC Whisker Reinforced Al-Mg Alloy Composites},
  journal = {Aluminum Alloys Their Physical and Mechanical Properties ,Proceedings of the 6th International Conference},
  year = 1998,
}

@article{CTT100430055,
  author = {手塚裕康},
  title = {ボロン添加によるアルミニウム合金の結晶粒微細化},
  journal = {軽金属学会第95回秋期大会講演概要},
  year = 1998,
}

@article{CTT100430044,
  author = {手塚裕康},
  title = {SiCw/Mg複合材料の特性に及ぼすプリフォーム製造条件の影響},
  journal = {軽金属学会第94回春期大会講演概要},
  year = 1998,
}

@article{CTT100429576,
  author = {HIROYASU TEZUKA},
  title = {Mechanical Properties and Microstructure of Ignition Proof Mg-Ca-Zr System Alloys Produced by Semi-Solid Squeeze Casting},
  journal = {Magnesium Alloys and Their Applications,Proceedings of Internatinal Conference},
  year = 1998,
}

@article{CTT100430051,
  author = {手塚裕康},
  title = {結晶粒微細化剤を添加したAl-7%-0.5%Mg合金の半溶融鋳造組織と機械的性質},
  journal = {軽金属学会第94回春期大会講演概要},
  year = 1998,
}

@article{CTT100430053,
  author = {手塚裕康},
  title = {TiおよびB添加による亜共晶Al-Si-Mg鋳造合金の結晶粒微細化},
  journal = {軽金属学会第94回春期大会講演概要},
  year = 1998,
}

@article{CTT100430054,
  author = {手塚裕康},
  title = {半溶融加圧鋳造Al-7%Si-3%Cu-1%Fe合金の組織と機械的性質に及ぼすMn添加の影響},
  journal = {軽金属学会第95回秋期大会講演概要},
  year = 1998,
}

@article{CTT100430056,
  author = {手塚裕康},
  title = {SiO<sub>2</sub>バインダ強化SiCw/AC8B合金複合材料の組織と機械的性質},
  journal = {日本鋳造工学会第132回全国講演大会講演概要集},
  year = 1998,
}

@article{CTT100430040,
  author = {HIROYASU TEZUKA},
  title = {Mechanical Properties and Microstructure of Ignition Proof Mg-Ca-Zｒ System Alloys Produced by Semi-Solid Squeeze Castings},
  journal = {Magnesium Alloys and Their Applications,Proceedings of International Conference},
  year = 1998,
}

@article{CTT100430058,
  author = {手塚裕康},
  title = {銅合金とアルミニウム合金の鋳ぐるみ接合},
  journal = {日本鋳造工学会第133回全国講演大会講演概要集},
  year = 1998,
}

@article{CTT100430057,
  author = {手塚裕康},
  title = {カルシウムとジルコニウムを添加したMg-6%Zn合金の半溶融温度域における初晶α相結晶粒の粗大化},
  journal = {日本鋳造工学会第133回全国講演大会講演概要集},
  year = 1998,
}

@article{CTT100537271,
  author = {手塚裕康},
  title = {半溶融凝固法により製造したAl-7%Si-0.5%Mg合金の微細組織と機械的性質},
  journal = {軽金属},
  year = 1998,
}

@article{CTT100537267,
  author = {HIROYASU TEZUKA},
  title = {Precipitation Behavior of P/M Hypereutectic Al-Si-Cu-Mg Alloys Containing Fe and Ni},
  journal = {Materials Transactions,JIM},
  year = 1998,
}

@article{CTT100537268,
  author = {HIROYASU TEZUKA},
  title = {Ignition Prevention of Magnesium by Simultaneous Addition of Calcium and Zirconium},
  journal = {International Journal of Cast Metals Research},
  year = 1998,
}

@article{CTT100672195,
  author = {田原和典 and 鄭  秉準 and 手塚裕康 and 里 達雄 and 神尾彰彦},
  title = {結晶微細化した亜共晶Al-Si-Cu合金の半溶融加圧鋳造組織と機械的性質},
  journal = {軽金属},
  year = 1997,
}

@article{CTT100429578,
  author = {手塚裕康},
  title = {カルシウムとジルコニウムを添加したMg-6%Zn合金の半溶融高圧鋳造組織と機械的性質},
  journal = {日本鋳造工学会第130回全国講演大会講演概要集},
  year = 1997,
}

@article{CTT100430043,
  author = {HIROYASU TEZUKA},
  title = {Precipitation Hardening Behavior of SiC Whisker Reinforced Al-Cu Based Alloys Composites},
  journal = {Proceedings of the 5th International Conference on Aluminum Alloys,Their Physical and Mechanical Properties},
  year = 1997,
}

@article{CTT100429577,
  author = {手塚裕康},
  title = {鉄添加による青銅系合金の半溶融組織制御},
  journal = {日本鋳造工学会第131回全国講演大会講演概要集},
  year = 1997,
}

@article{CTT100430036,
  author = {手塚裕康},
  title = {半溶融凝固Al-7%Si-3%Cu合金における鉄系金属間化合物の晶出挙動},
  journal = {日本金属学会第121回秋期講演大会講演概要},
  year = 1997,
}

@article{CTT100429574,
  author = {手塚裕康},
  title = {半溶融加圧鋳造Al-7%Si-3%Cu合金の組織と機械的性質},
  journal = {軽金属学会第92回春期大会講演概要},
  year = 1997,
}

@article{CTT100430050,
  author = {手塚裕康},
  title = {SiCウィスカ強化Al-Si系鋳造合金複合材料の機械的性質},
  journal = {日本金属学会第121回秋期講演大会講演概要},
  year = 1997,
}

@article{CTT100537276,
  author = {HIROYASU TEZUKA},
  title = {Mechanical Properties and Fracture Process of SiCw/Mg Composites Produced by Squeeze Casting and Extrusion},
  journal = {Materials Transactions,JIM},
  year = 1997,
}

@article{CTT100537275,
  author = {HIROYASU TEZUKA},
  title = {Mechanical Properties and Structure of Ignition-Proof Mg-Ca-Zr Alloys Produced by Squeeze Casting},
  journal = {Materials Transactions,JIM},
  year = 1997,
}

@article{CTT100537274,
  author = {手塚裕康},
  title = {ひずみ導入したAl-7%Si-0.5%Mg合金の半溶融凝固組織},
  journal = {軽金属},
  year = 1997,
}

@article{CTT100672662,
  author = {洪 性吉 and 崔 政喆 and 林 徳仲 and 手塚裕康 and 里 達雄 and 神尾彰彦},
  title = {SiCウィスカ強化Al-CuおよびAl-Cu-Mg合金基複合材料の時効硬化挙動},
  journal = {日本金属学会誌},
  year = 1996,
}

@article{CTT100672664,
  author = {張 茂勲 and 陳 暁 and 銭 匡武 and 洪 性吉 and 手塚裕康 and 里 達雄 and 神尾彰彦},
  title = {Al2O3-SiO2繊維強化アルミニウム合金複合材料の組織及び機械的性質},
  journal = {鋳造工学},
  year = 1996,
}

@article{CTT100429573,
  author = {HIROYASU TEZUKA},
  title = {Mechanical Properties and Structure of Ignition-Proof Magnesium Alloys Produced by Squeeze Casting},
  journal = {Proceedings of the 4th Asian Foundry Congress},
  year = 1996,
}

@article{CTT100537272,
  author = {HIROYASU TEZUKA},
  title = {Effects of Thermal Residual Stress on Mechanical Properties of SiC Whisker Reinforced Al-Mg and Al-Li  Alloys Composites},
  journal = {Materials Transactions,JIM},
  year = 1996,
}

@article{CTT100537311,
  author = {HIROYASU TEZUKA},
  title = {Analysis of Thermal Residual Stresses inUnidirectionally SiCw/Al-Alloy Matrix Composites by X-ray Diffraction},
  journal = {Materials Trans. JIM.},
  year = 1996,
}

@article{CTT100672190,
  author = {細田秀樹 and 里 達雄 and 手塚裕康 and 三島良直 and 井上漢龍 and 神尾彰彦 and 篠田哲守},
  title = {遷移金属トリアルミナイドAl3Nbの欠陥構造と添加元素置換サイトの擬基底状態解析による計算},
  journal = {軽金属},
  year = 1994,
}

@article{CTT100670269,
  author = {細田秀樹 and 里 達雄 and 手塚裕康 and 三島良直 and 神尾彰彦},
  title = {Al-Li合金中のL12型Al3Li準安定相における添加元素置換挙動},
  journal = {日本金属学会誌},
  year = 1994,
}

@article{CTT100670268,
  author = {里 達雄 and 高橋 功 and 手塚裕康 and 神尾彰彦},
  title = {Mg-Y合金の時効析出組織},
  journal = {軽金属},
  year = 1992,
}

@article{CTT100670255,
  author = {神尾彰彦 and 手塚裕康 and 里  達雄 and Than Trong Long and 高橋恒夫},
  title = {Al-Fe合金の急冷凝固組織と相分解},
  journal = {軽金属},
  year = 1986,
}

@article{CTT100670253,
  author = {神尾彰彦 and 手塚裕康 and 里  達雄 and Than Trong LONG and 高橋恒夫},
  title = {Al-Fe-Ce合金の急冷凝固組織と相分解},
  journal = {軽金属},
  year = 1985,
}

@inproceedings{CTT100672668,
  author = {Yong-Chul Lee and Hiroyasu Tezuka and Equo Kobayashi and Tatsuo Sato},
  title = {Effects of Annealing Temperature on the Recrystallization Behavior and microstructure of Al-Mn Alloys with Different Second Particles},
  booktitle = {},
  year = 2013,
}

@inproceedings{CTT100643655,
  author = {手塚裕康},
  title = {計算機シミュレーションおよび3DAP法によるAl-Mg-Si系合金のナノクラスタ形成挙動の解析},
  booktitle = {軽金属学会第121回秋期大会講演概要},
  year = 2012,
}

@inproceedings{CTT100672671,
  author = {Z Zhang and Equo Kobayashi and Hiroyasu Tezuka and Tatsuo Sato},
  title = {Influence of the Fe Content, Mn/Fe Ratio and Cooling Rate on the Modification Process of Fe Intermetallic Compounds in Hypoeutectic Al-Si Alloys},
  booktitle = {},
  year = 2012,
}

@inproceedings{CTT100672679,
  author = {C Phongphisutthinan and Hiroyasu Tezuka and Tatsuo Sato},
  title = {Evolution of Fragmented Fe-intermetallic Compounds in the Semi-solid State of Al-Mg-Si-Fe Alloys by Deformation Semi-Solid Forming Process},
  booktitle = {},
  year = 2012,
}

@inproceedings{CTT100672931,
  author = {C Phongphisutthinan and Hiroyasu Tezuka and Tatsuo Sato and S Takamori and Y Ohsawa},
  title = {Refinement of Fe-intermetallic Compounds by Caliber Rolling Process of Al-Mg-Si-Fe Alloys},
  booktitle = {},
  year = 2012,
}

@inproceedings{CTT100643657,
  author = {手塚裕康},
  title = {Al-Zn-Mg合金の半溶融組織に対するひずみ導入および0.5mass%Fe添加の影響},
  booktitle = {軽金属学会第121回秋期大会講演概要},
  year = 2011,
}

@inproceedings{CTT100643034,
  author = {手塚裕康},
  title = {ＮａＣｌを孔形成材として作製した生体多孔質チタンの機械的性質の評価},
  booktitle = {日本金属学会2011年秋期（第149回）大会講演概要},
  year = 2011,
}

@inproceedings{CTT100643033,
  author = {手塚裕康},
  title = {鉄を含むAl-Mg-Si合金の凝固組織に及ぼすMgおよびSi量の影響},
  booktitle = {日本金属学会2011年秋期(第149回)大会講演概要},
  year = 2011,
}

@inproceedings{CTT100643032,
  author = {手塚裕康},
  title = {Feを含むAl-8.2%Mg-4.8%Si合金の凝固組織に及ぼすSr添加の影響},
  booktitle = {日本金属学会2011年秋期(第149回)大会講演概要},
  year = 2011,
}

@inproceedings{CTT100643031,
  author = {手塚裕康},
  title = {生分解性セラミックス/多孔質チタン複合材料の溶出過程および力学的性質},
  booktitle = {日本金属学会2011年秋期(第149回)大会講演概要},
  year = 2011,
}

@inproceedings{CTT100643035,
  author = {HIROYASU TEZUKA},
  title = {Caliber rolling process and mechanical properties of high Fe－containing Al-Mg-Si alloys},
  booktitle = {日本金属学会2011年秋期(第149回)大会講演概要},
  year = 2011,
}

@inproceedings{CTT100672933,
  author = {C Phongphisutthinan and Hiroyasu Tezuka and Tatsuo Sato},
  title = {Evolution of Fe-intermetallic Compounds in the Semi-solid State of Al-Mg-Si-Fe alloys by the Deformation Semi-Solid Forming process},
  booktitle = {},
  year = 2011,
}

@inproceedings{CTT100643036,
  author = {手塚裕康},
  title = {Al-Mg2Si擬二元系合金の機械的性質に及ぼすMg2Siの形状変化の影響},
  booktitle = {日本鋳造工学会第159回全国講演大会講演概要集},
  year = 2011,
}

@inproceedings{CTT100672935,
  author = {J Kim and Hiroyasu Tezuka and Equo Kobayashi and Tatsuo Sato},
  title = {Effects of Cu and Ag Addition on Nanocluster Formation and Age-hardening Behavior in Al-Mg-Si Alloys},
  booktitle = {},
  year = 2011,
}

@inproceedings{CTT100624632,
  author = {手塚裕康},
  title = {加工ｰ半溶融鋳造法で作製したAl-7%Si-0.35%Mg-1%Fe合金の機械的性質に及ぼすMn添加の影響},
  booktitle = {鋳造工学第158回全国講演大会講演概要集},
  year = 2011,
}

@inproceedings{CTT100624641,
  author = {HIROYASU TEZUKA},
  title = {Fabrication and mechanical properties of Al-based in-situ nano-composites reinforced by Al2O3 and intermetallic compounds},
  booktitle = {Proceedings of the 120th Conference of Japan Insttute of Light Metals},
  year = 2011,
}

@inproceedings{CTT100624640,
  author = {HIROYASU TEZUKA},
  title = {Development of biodegradable porous magnesium for implant materials},
  booktitle = {Proceedings of the 120th Conference of Japan Institute of Light Metals},
  year = 2011,
}

@inproceedings{CTT100624639,
  author = {手塚裕康},
  title = {生分解性セラミックス/多孔質チタン複合材料の力学的性質},
  booktitle = {軽金属学会第120回春期大会講演概要},
  year = 2011,
}

@inproceedings{CTT100624637,
  author = {手塚裕康 and 手塚 裕康 and 小林郁夫 and 里 達雄 and 織田 和宏 and 塩田 正彦 and 鹿毛 秀彦},
  title = {超音波パルス法によろ高剛性アルミニウム合金ダイカストのヤング率評価},
  booktitle = {鋳造工学第157回全国講演大会講演概要集},
  year = 2010,
}

@inproceedings{CTT100624635,
  author = {手塚裕康},
  title = {Al-7%Si-0.3%Mg合金半凝固鋳造材の組織と機械的性質に及ぼすFe含有量の影響},
  booktitle = {鋳造工学第157回全国講演大会講演概要集},
  year = 2010,
}

@inproceedings{CTT100673199,
  author = {H.B. Lee and Hiroyasu Tezuka and Equo Kobayashi and Tatsuo Sato and K.D. Woo},
  title = {Fabrication of (Al2O3-IMC)p/Al Composite Materials by In-situ Reaction Using MA Processed Al/MO Powders},
  booktitle = {Proceedings of the 12th International Conference on Aluminum Alloys},
  year = 2010,
}

@inproceedings{CTT100673143,
  author = {K. Eidhed and H. Tezuka and T. Sato},
  title = {Microstructure and Mechanical Properties of Al-Mg-Si Based Alloys Produced by Deformation-Semi-Solid-Forming Process},
  booktitle = {Proceedings of the 12th International Conference on Aluminum Alloys},
  year = 2010,
}

@inproceedings{CTT100673141,
  author = {C. Phongphisutthinan and H. Tezuka and T. Sato},
  title = {Effects of Fe and Mn Additions on Semi-solid Microstructures of Al-Mg-Si Based Alloys in Deformation-Semi-Solid- Forming Process},
  booktitle = {Proceedings of the 12th International Conference on Aluminum Alloys},
  year = 2010,
}

@inproceedings{CTT100624720,
  author = {HIROYASU TEZUKA},
  title = {Fabrication of (Al2O3-Al3Nb)/Al Composite Materials by In-situ Reaction Using MA Processed Al/Nb2O5 Powder},
  booktitle = {Materials Science Forum},
  year = 2010,
}

@inproceedings{CTT100624642,
  author = {手塚裕康},
  title = {生体用Ti-Fe二元合金の組織と力学的性質},
  booktitle = {軽金属学会第118回春期大会講演概要},
  year = 2010,
}

@inproceedings{CTT100624643,
  author = {HIROYASU TEZUKA},
  title = {Fabrication of (Al2O3p-Al5W)/Al composite materials by the in-situ reaction of MA processed Al/WO3 powder},
  booktitle = {Proceedings of the 118th Conference of Japan Institute of Light Metals},
  year = 2010,
}

@inproceedings{CTT100624614,
  author = {HIROYASU TEZUKA},
  title = {Fabrication of θ-Al2O3p/Al-Al3Ta Composite Material by the In-situ Reaction of MA Processed Al/Ta2O5 Powder},
  booktitle = {Processing and Fabrication of Advanced Materials-Ⅷ},
  year = 2009,
}

@inproceedings{CTT100624613,
  author = {HIROYASU TEZUKA},
  title = {Microstructures of an Al-7%Si-0.35%Mg-1%Fe-0.7%Mn Alloy Fabricated by Deformation Semi-solid Forming Process},
  booktitle = {Processing and Fabrication of Advanced Materials-Ⅷ},
  year = 2009,
}

@inproceedings{CTT100624618,
  author = {HIROYASU TEZUKA},
  title = {Enhanced Precipitation hardening in Mg-6.0mass%Zn-3.0mass%Al alloys by Ca and Ag addition},
  booktitle = {Proceedings of the 117th Conference of Japan Institute of Light Metals},
  year = 2009,
}

@inproceedings{CTT100624616,
  author = {手塚裕康},
  title = {Al-Mn系合金の析出および再結晶挙動に及ぼす均質化条件の影響},
  booktitle = {軽金属学会第117回秋期大会講演概要},
  year = 2009,
}

@inproceedings{CTT100624620,
  author = {HIROYASU TEZUKA},
  title = {The Effect of Fe Content on Semi-solid Microstructures of Al-Mg-Si Based Alloys Produced by Deformation-Semi-Solid-Forming Prpcess},
  booktitle = {Reports of the 155th JFS Meeting},
  year = 2009,
}

@inproceedings{CTT100624621,
  author = {HIROYASU TEZUKA},
  title = {The influence of Mn addition on microstructures of an Al-7%Si-0 of Mn addition on microstructures of an Al-7%Si-0.35%Mg-1%Fe alloy fabricated by the cold compression semi-solid forming process},
  booktitle = {Reports of the 155th JFS Meeting},
  year = 2009,
}

@inproceedings{CTT100624619,
  author = {手塚裕康},
  title = {冷間圧縮ｰ半溶融鋳造法を用いたAl-7%Si-0.35%Mg-1%Fe合金の組織に及ぼすMn添加の影響},
  booktitle = {鋳造工学第155回全国講演大会講演概要集},
  year = 2009,
}

@inproceedings{CTT100624606,
  author = {手塚裕康},
  title = {鉄を含むAl-Mg2Si擬二元共晶合金の凝固組織},
  booktitle = {日本金属学会講演概要2009年秋期（第145回）大会},
  year = 2009,
}

@inproceedings{CTT100624605,
  author = {手塚裕康},
  title = {溶融アルミニウム合金めっきを施した純鉄のめっき層組織に及ぼす浴組成の影響},
  booktitle = {日本金属学会講演概要2009年秋期(第145回)大会},
  year = 2009,
}

@inproceedings{CTT100624611,
  author = {手塚裕康},
  title = {ナノインデンテーション法によるAl-Si-Cu-Ni系合金中の晶出物のヤング率評価},
  booktitle = {軽金属学会第116回春期大会講演概要},
  year = 2009,
}

@inproceedings{CTT100624649,
  author = {手塚裕康},
  title = {Al-7%Si-0.5%Mg合金半溶融鋳造材の熱処理特性},
  booktitle = {鋳造工学第154回全国講演大会講演概要集},
  year = 2009,
}

@inproceedings{CTT100624648,
  author = {手塚裕康},
  title = {加工ｰ半溶融鋳造によるAl-7%Si-0.35%Mg-1%Fe合金の高品質化},
  booktitle = {鋳造工学第154回全国講演大会講演概要集},
  year = 2009,
}

@inproceedings{CTT100624607,
  author = {HIROYASU TEZUKA},
  title = {Effect of Ca addition on the aging behavior of Mg-5.0mass%Al-0.3mass%Mn alloy},
  booktitle = {Proceedings of the 116th Conference of Japan Institute of Light Metals},
  year = 2009,
}

@inproceedings{CTT100624608,
  author = {手塚裕康},
  title = {結晶粒微細化したAl-Zn-Mg系合金のPFZ形成および機械的性質に及ぼすAg添加の影響},
  booktitle = {軽金属学会第116回春期大会講演概要},
  year = 2009,
}

@inproceedings{CTT100624609,
  author = {HIROYASU TEZUKA},
  title = {Fabrication of α-Al2O3p/Al composite plates by in-situ reaction of MA processed Al/SiO2 powder},
  booktitle = {Proceedings of the 116th Conference ofJapan Institute of light Metals},
  year = 2009,
}

@inproceedings{CTT100624612,
  author = {手塚裕康},
  title = {AZ31マグネシウム合金の結晶粒微細化に及ぼす繰り返し圧延および焼なましの影響},
  booktitle = {軽金属学会第116回春期大会講演概要},
  year = 2009,
}

@inproceedings{CTT100624610,
  author = {手塚裕康},
  title = {Mnを添加したAl-7%Si-0.35%Mg-1%Fe合金の加工ｰ半溶融鋳造組織と機械的性質},
  booktitle = {軽金属学会第116回春期大会講演概要},
  year = 2009,
}

@inproceedings{CTT100585160,
  author = {手塚裕康},
  title = {微量添加元素により結晶粒径を調整したAl-Zn-Mg系合金のPFZ形成挙動と機械的性質},
  booktitle = {軽金属学会第115回秋期大会講演概要},
  year = 2008,
}

@inproceedings{CTT100585165,
  author = {手塚裕康},
  title = {357アルミニウム合金半溶融鋳造材の機械的性質に及ぼす熱処理の影響},
  booktitle = {鋳造工学第153回全国講演大会講演概要集},
  year = 2008,
}

@inproceedings{CTT100585164,
  author = {手塚裕康},
  title = {Al-10%Mg-Fe-Mn合金の加工ｰ半溶融組織},
  booktitle = {鋳造工学第153回全国講演大会講演概要集},
  year = 2008,
}

@inproceedings{CTT100585182,
  author = {HIROYASU TEZUKA},
  title = {Controlling of Mg and Si contents for semi-solid microstructures of Al-Mg-Si-Mn alloys produced by D-SSF process},
  booktitle = {Aluminium alloys},
  year = 2008,
}

@inproceedings{CTT100585163,
  author = {手塚裕康},
  title = {357アルミニウム合金半溶融鋳造材の組織と機械的性質},
  booktitle = {鋳造工学第152回全国講演大会講演概要集},
  year = 2008,
}

@inproceedings{CTT100563328,
  author = {HIROYASU TEZUKA},
  title = {Control of Mn -containing dispersoids in a DC-cast Al-Mg-Si-Mn alloy.},
  booktitle = {軽金属学会第113回秋期大会講演概要},
  year = 2007,
}

@inproceedings{CTT100563352,
  author = {手塚裕康},
  title = {高濃度のFeを含むAl-10%Mg合金の加工ー半溶融組織制御},
  booktitle = {鋳造工学第151回全国講演大会講演概要集},
  year = 2007,
}

@inproceedings{CTT100563348,
  author = {手塚裕康},
  title = {ひずみ導入したAl-Mg-Si系展伸用合金の半溶融組織制御と機械的性質},
  booktitle = {鋳造工学第151回全国講演大会講演概要集},
  year = 2007,
}

@inproceedings{CTT100563342,
  author = {手塚裕康},
  title = {ナノインデンテーション法による微細晶出相のヤング率評価},
  booktitle = {日本金属学会2007年秋期(第141回)大会講演概要},
  year = 2007,
}

@inproceedings{CTT100563339,
  author = {手塚裕康},
  title = {新差圧鋳造法によろアルミニウム砂型鋳造品の高品質化},
  booktitle = {鋳造工学第150回全国講演大会講演概要集},
  year = 2007,
}

@inproceedings{CTT100563335,
  author = {手塚裕康},
  title = {過共晶Al-Si系合金ダイカスト材の微細組織とそのヤング率評価},
  booktitle = {鋳造工学第150回全国講演大会講演概要集},
  year = 2007,
}

@inproceedings{CTT100528007,
  author = {馬場園明彦 and 廣澤渉一 and 手塚裕康 and 里達雄},
  title = {Mg-Y系合金のナノ析出組織に及ぼすSm添加の影響},
  booktitle = {軽金属学会第111回秋期大会講演概要},
  year = 2006,
}

@inproceedings{CTT100528014,
  author = {吉田哲也 and 手塚裕康 and 里達雄},
  title = {ひずみ導入したAl-Mg-Si-Mn系展伸用合金の半溶融組織変化},
  booktitle = {軽金属学会第111回秋期大会講演概要},
  year = 2006,
}

@inproceedings{CTT100528010,
  author = {鈴木啓文 and 手塚裕康 and 里達雄},
  title = {高濃度鉄を含むAl-7%Si-0.35%Mg合金の熱間圧縮ｰ半溶融鋳造組織と機械的性質},
  booktitle = {軽金属学会第111回秋期大会講演概要},
  year = 2006,
}

@inproceedings{CTT100523754,
  author = {W.Eidhed and C.Limmaneevichitr and H.Tezuka and T.Sato},
  title = {Effect of Heating Rates on Microstructures of Al-Mg-Si-Mn Alloy Produced by D-SSF Process.},
  booktitle = {日本鋳造工学会第149回全国講演大会講演概要集},
  year = 2006,
}

@inproceedings{CTT100523755,
  author = {鈴木啓文 and 手塚裕康 and 里達雄},
  title = {熱間圧縮ｰ半溶融鋳造法による高濃度鉄を含むAl-7%Si-0.35%Mg合金の組織},
  booktitle = {日本鋳造工学会第149回全国講演大会講演概要集},
  year = 2006,
}

@inproceedings{CTT100523750,
  author = {合田知男 and 藪下雅崇 and 手塚裕康 and 里達雄 and 織田和宏 and 塩田正彦},
  title = {過共晶Al-Si合金ダイカスト材の組織とナノインデンテーション法によるヤング率の評価},
  booktitle = {日本鋳造工学会第149回全国講演大会講演概要集},
  year = 2006,
}

@inproceedings{CTT100523776,
  author = {T.Sato and H.Tezuka},
  title = {A New Deformation-Semi-Solid Casting Process of Highly Concentrated Fe Containing Al-Si-Cu-Fe Cast Alloys.},
  booktitle = {Solid State Phenomena},
  year = 2006,
}

@inproceedings{CTT100523768,
  author = {W.Eidhed and C.Limmaneevichitr and H.Tezuka and T.Sato},
  title = {The development of new Al-Mg-Si alloys for thixoforming.},
  booktitle = {Materials Science Forum},
  year = 2006,
}

@inproceedings{CTT100523759,
  author = {和田格 and 手塚裕康 and 羽賀俊雄 and 里達雄},
  title = {高速双ロールキャストAl-Mn系合金のミクロ組織},
  booktitle = {軽金属学会第110回春期大会講演概要},
  year = 2006,
}

@inproceedings{CTT100523740,
  author = {里達雄 and 上野仁士 and 手塚裕康},
  title = {加工ｰ半溶融プロセスによるAl-Si-Cu-Fe合金の組織制御と機械的性質の改善},
  booktitle = {日本鋳造工学会第148回全国講演大会講演概要集},
  year = 2006,
}

@inproceedings{CTT100523761,
  author = {和田格 and 手塚裕康 and 羽賀俊雄 and 里達雄},
  title = {高速双ロールキャスト法により作製したAl-Mn系合金の組織と機械的性質},
  booktitle = {日本金属学会2006年春期(第138回)講演大会概要},
  year = 2006,
}

@inproceedings{CTT100395508,
  author = {馬場園明彦 and 廣澤渉一 and 手塚裕康 and 里達雄},
  title = {Mg-Y系合金の析出過程ならびに析出組織に及ぼすSm添加の影響},
  booktitle = {軽金属学会第109回秋期大会講演概要},
  year = 2005,
}

@inproceedings{CTT100395506,
  author = {合田知男 and 手塚裕康 and 里達雄 and 織田和宏 and 塩田正彦},
  title = {Al-Si系合金ダイカスト材のナノインデンテーション法によるヤング率評価},
  booktitle = {日本鋳造工学会第147回全国講演大会講演概要集},
  year = 2005,
}

@inproceedings{CTT100395507,
  author = {酒向茂 and 手塚裕康 and 里達雄},
  title = {半溶融状態におけるAl-7%Si合金の流動性評価},
  booktitle = {日本鋳造工学会第147回全国講演大会講演概要集},
  year = 2005,
}

@inproceedings{CTT100395505,
  author = {石川達也 and 手塚裕康 and 里達雄},
  title = {AZ31マグネシウム合金の熱間圧延条件による結晶粒組織変化と機械的性質への影響},
  booktitle = {日本金属学会2005年秋期(第137回)大会講演概要},
  year = 2005,
}

@inproceedings{CTT100395504,
  author = {Tomoo Goda and Hiroyasu Tezuka and Kazuhiro Oda and Masahiko Shioda and Tatsuo Sato},
  title = {Young's moduli of crystalline phases in Al-Si cast alloys evaluated by nanoindentation technique},
  booktitle = {Proceedings of the 2nd Japan-Korea workshop for young foundry engineers},
  year = 2005,
}

@inproceedings{CTT100395503,
  author = {Shigeru Sako and Hiroyasu Tezuka and Tatsuo Sato},
  title = {Microstructures and fluidity of Al-Si cast alloys in semi-solid state},
  booktitle = {Proceedings of the 2nd Japan-Korea workshop for young foundry engineers},
  year = 2005,
}

@inproceedings{CTT100395501,
  author = {茂泉健 and 手塚裕康 and 里達雄},
  title = {共晶Si組織および析出組織の異なるアルミニウム合金鋳物の熱疲労寿命},
  booktitle = {日本鋳造工学会第146回全国講演大会講演概要集},
  year = 2005,
}

@inproceedings{CTT100395502,
  author = {里達雄 and 上野仁士 and 手塚裕康},
  title = {加工･半溶融鋳造プロセスによるAl-Si系鋳造合金のミクロ組織制御と特性改善},
  booktitle = {日本鋳造工学会第146回全国講演大会講演概要集},
  year = 2005,
}

@inproceedings{CTT100670252,
  author = {神尾彰彦 and 手塚裕康 and 里  達雄 and Than Trong  Long and 高橋恒夫},
  title = {急冷凝固したAl-Cu合金の組織と相分解},
  booktitle = {軽金属},
  year = 1985,
}

@misc{CTT100595124,
  author = {HIROYASU TEZUKA},
  title = {},
  year = 1972,
}



@misc{CTT100595124,
  author = {HIROYASU TEZUKA},
  title = {},
  school = {日本大学},
  year = 1972,
  note = {undergraduate thesis},
}