@book{CTT100486096,
  author = {丸山一男},
  title = {機械工学辞典(分担)},
  publisher = {日本機械学会},
  year = 1997,
}

@book{CTT100486092,
  author = {丸山一男},
  title = {ねじ締結ガイドブック…設計編…(改訂版)(共著)},
  publisher = {日本ねじ研究協会},
  year = 1994,
}

@book{CTT100486086,
  author = {丸山一男},
  title = {ねじ締結体の接合面のすべり係数に関する実験結果の報告書(共著)},
  publisher = {日本ねじ研究協会},
  year = 1993,
}

@book{CTT100486069,
  author = {丸山一男 and 賀勢晋司 and 澤俊行},
  title = {高強度ねじ締結の体系的計算法-円筒状一本ボルト締結-(共訳)},
  publisher = {日本ねじ研究協会},
  year = 1989,
}

@book{CTT100486070,
  author = {丸山一男},
  title = {21世紀のナノテクノロジー時代を展望する極限精密技術},
  publisher = {精密工学会},
  year = 1988,
}

@article{CTT100421338,
  author = {早瀬仁則 and 中山　智 and 初澤　毅 and 丸山一男},
  title = {三次元座標測定用ステレオビジョンプローブの開発（逆解析によるぼけた画像からの高精度エッジ位置検出） },
  journal = {精密工学会誌},
  year = 1999,
}

@article{CTT100421341,
  author = {Kanji MASHIMO and Tetsuya NAKAMURA and Kazuo　MARUYAMA and Takeshi HATSUZAWA},
  title = {Dimensional Measurement for Plastic Products Using Triangulation Method},
  journal = {euspen conference proceedings volume 2 (1st international conference and general meeting of the european society for precision engineering and nanotechnology bremen, Germany May 31st - June 4th 1999)},
  year = 1999,
}

@article{CTT100421340,
  author = {Masanori HAYASE and Satoshi NAKAYAMA and Takeshi HATSUZAWA and Kazuo　MARUYAMA },
  title = {Development of Stereo Vision Probe for Precise Coordinate Measurement - Detection of Edge Position from Blurred Images by Inverse Analysis -  },
  journal = {euspen conference proceedings volume 2 (1st international conference and general meeting of the european society for precision engineering and nanotechnology bremen, Germany May 31st - June 4th 1999)},
  year = 1999,
}

@article{CTT100421339,
  author = {Kazuo　MARUYAMA and Hirokazu　TSUJI and Hitoshi　KAMIYA},
  title = {Measurement Method of Positioning Accuracy for SCARA Robot},
  journal = {euspen conference proceedings volume 2 (1st international conference and general meeting of the european society for precision engineering and nanotechnology bremen, Germany May 31st - June 4th 1999)},
  year = 1999,
}

@article{CTT100486098,
  author = {丸山一男},
  title = {時計用水晶振動子による表面形状測定用タッピングスタイラス},
  journal = {計測自動制御学会論文集},
  year = 1998,
}

@article{CTT100486095,
  author = {丸山一男},
  title = {空間フィルタによるTABリードの欠陥検査},
  journal = {計測自動制御学会論文集},
  year = 1997,
}

@article{CTT100486097,
  author = {丸山一男},
  title = {3次元自由曲面形状の光非接触測定装置(第4報)--光線追跡による位置検出のシミュレーションー-},
  journal = {精密工学会誌},
  year = 1997,
}

@article{CTT100486094,
  author = {KAZUO MARUYAMA},
  title = {Development of Automatic Inspection System for TAB-Tayp lead Defects -Improvement of Positioning Accuracy},
  journal = {International Progress in Precision Engineering (Proc, of 8th IPES)},
  year = 1995,
}

@article{CTT100486090,
  author = {丸山一男},
  title = {平面多関節型ロボットの位置精度の測定方法},
  journal = {精密工学会誌},
  year = 1995,
}

@article{CTT100486093,
  author = {KAZUO MARUYAMA},
  title = {Development of Noncontact-Stereovision-Type Probe for Trree-Dimensiond Coordinate Meeasauring Machine},
  journal = {International Jaurnal of JSPE},
  year = 1995,
}

@article{CTT100486089,
  author = {KAZUO MARUYAMA},
  title = {Development of Subpixel Edge Probe with High Resolution and Application for Coordinate Measuring Machine},
  journal = {Proc. ASPE 1994 Annual Meeting},
  year = 1994,
}

@article{CTT100486091,
  author = {KAZUO MARUYAMA},
  title = {Study on Slip Coefficients of Contact Surface in Bolted Joints},
  journal = {Proc. the 2nd China/Japan International Symposium on Fasteners},
  year = 1994,
}

@article{CTT100486088,
  author = {丸山一男},
  title = {TABリードの欠陥自動検査システムの開発…位置決め精度の向上…},
  journal = {精密工学会誌},
  year = 1994,
}

@article{CTT100486087,
  author = {KAZUO MARUYAMA},
  title = {Development of Noncontact-type Coordinate Measuring Machine -measurement of Accuracy of Screw Thread Profile},
  journal = {Proceedings of ASPE 1993 Annual Meeting},
  year = 1993,
}

@article{CTT100486083,
  author = {丸山一男},
  title = {塑性域締結におけるねじ締結体の挙動(剛塑性体モデルによる解析)},
  journal = {精密工学会誌},
  year = 1993,
}

@article{CTT100486084,
  author = {丸山一男},
  title = {グラフ理論による機械システムの運動方程式の自動生成(機械振動系への適用)},
  journal = {日本機械学会論文集(C編)},
  year = 1993,
}

@article{CTT100486085,
  author = {KAZUO MARUYAMA},
  title = {Development of Inspection System for IC Lead Frame Defects},
  journal = {Journal of Robotics and Mechatronics},
  year = 1993,
}

@article{CTT100486082,
  author = {KAZUO MARUYAMA},
  title = {Development of Non-contact-type Probe for COORDINATE Measuring Machine},
  journal = {Proc. 1st Japanese-French Congress of Mechatronics},
  year = 1992,
}

@article{CTT100486156,
  author = {丸山一男},
  title = {グラフ理論による送りねじを用いた位置決め機構の動的挙動の解析},
  journal = {日本機械学会論文集},
  year = 1990,
}

@article{CTT100486130,
  author = {丸山一男},
  title = {ねじ込みボルトによるねじ締結体の特性について(全面座金属平形ガスケットを用いた被締結体が中空円筒の場合)},
  journal = {日本機械学会論文集(C編)},
  year = 1990,
}

@article{CTT100486143,
  author = {丸山一男},
  title = {塑性域締結におけるねじ締結体の挙動(締付け停止時のねじ部トルクの影響)},
  journal = {精密工学会誌},
  year = 1990,
}

@article{CTT100486129,
  author = {KAZUO MARUYAMA},
  title = {The Characteristics of Bolted Joints Subjected to External Bending Moments(Analysis of the Case Where Clamped Parts are Pipe Flanges with Gaskets by Three Dimensional Theory of Elasticity)},
  journal = {JSME International Journal S. 1},
  year = 1989,
}

@article{CTT100486164,
  author = {丸山一男},
  title = {ねじ研究十年の成果(第2編)(分担執筆)},
  journal = {日本ねじ研究協会},
  year = 1989,
}

@article{CTT100486163,
  author = {丸山一男},
  title = {VDI2230 Blatt 1(1986)高強度ねじ締結の体系的計算法(円筒状一本ボルト締結)第3版(共訳)},
  journal = {日本ねじ研究協会},
  year = 1989,
}

@article{CTT100486128,
  author = {丸山一男},
  title = {曲げモーメントを受けるねじ締結体の特性について(被締結体がガスケット付き管フランジの場合の三次元弾性論による解析)},
  journal = {日本機械学会論文集(C編)},
  year = 1988,
}

@article{CTT100486142,
  author = {KAZUO MARUYAMA},
  title = {Behavior of Bolted Joints Tightened in Plastic Region(Numerical Analysis by Use of the Flow Theory of Plasticity)},
  journal = {Bull. P. M. E. (T. I. T. )},
  year = 1988,
}

@article{CTT100486141,
  author = {丸山一男},
  title = {塑性域締結におけるねじ締結体の挙動(ひずみ増分理論による解析)},
  journal = {精密工学会誌},
  year = 1988,
}

@article{CTT100486155,
  author = {KAZUO MARUYAMA},
  title = {Form Rolling of FRP Thread with Ultrasonic Vibration(Fundamental Experiment)},
  journal = {Bull. P. M. E. (T. I. T. )},
  year = 1988,
}

@article{CTT100486162,
  author = {丸山一男},
  title = {機械工学辞典(分担執筆)},
  journal = {朝倉書店},
  year = 1988,
}

@article{CTT100486072,
  author = {丸山一男},
  title = {超音波振動によるFRPねじの転造},
  journal = {精密工学会誌},
  year = 1988,
}

@article{CTT100486071,
  author = {丸山一男},
  title = {弾塑性域締結ねじ性能試験機の試作},
  journal = {精密工学会誌},
  year = 1988,
}

@article{CTT100486154,
  author = {KAZUO MARUYAMA},
  title = {Automatic Measurement of Screw Pitch Error by Thermoplastic Hologram},
  journal = {Bull. P. M. E. (T. I. T. )},
  year = 1987,
}

@article{CTT100486073,
  author = {丸山一男},
  title = {ねじ状切削工具のリード誤差自動測定機の開発},
  journal = {精密工学会誌},
  year = 1987,
}

@article{CTT100486081,
  author = {丸山一男},
  title = {塑性域締結におけるねじ締結体の挙動},
  journal = {精密工学会誌},
  year = 1987,
}

@article{CTT100486153,
  author = {丸山一男},
  title = {サーモプラスチックホログラムを用いたねじのピッチ測定},
  journal = {精密工学会誌},
  year = 1986,
}

@article{CTT100486160,
  author = {丸山一男},
  title = {機械要素設計ガイドブック(分担執筆)},
  journal = {大河出版},
  year = 1985,
}

@article{CTT100486127,
  author = {KAZUO MARUYAMA},
  title = {Prediction of Fatigue Strength of Bolt-Nut Joints Based on Residual Stress},
  journal = {Bull. P. M. E. (T. I. T. )},
  year = 1985,
}

@article{CTT100486152,
  author = {丸山一男},
  title = {電気標準用ボビンのリード精度の非接触自動測定},
  journal = {精密機械},
  year = 1985,
}

@article{CTT100486126,
  author = {丸山一男},
  title = {残留応力によるねじの疲労強度の予測},
  journal = {日本機械学会論文集(A編)},
  year = 1984,
}

@article{CTT100486140,
  author = {KAZUO MARUYAMA},
  title = {Characteristics of Threaded Joints in Ultrasonic Vibrating System},
  journal = {Bull. JSME},
  year = 1984,
}

@article{CTT100486161,
  author = {丸山一男},
  title = {ねじ締結ガイドブック(強度編)(分担執筆)},
  journal = {日本ねじ研究協会},
  year = 1984,
}

@article{CTT100486124,
  author = {丸山一男},
  title = {プラスチックねじの強度に関する研究(組合せ荷重下におけるプラスチックねじの挙動)},
  journal = {精密機械},
  year = 1984,
}

@article{CTT100486125,
  author = {丸山一男},
  title = {ねじ締結体の疲労強度(ねじ締結体が連接棒の場合)},
  journal = {精密機械},
  year = 1984,
}

@article{CTT100486074,
  author = {丸山一男},
  title = {歯車ホブのリード誤差の自動測定},
  journal = {日本機械学会論文集},
  year = 1983,
}

@article{CTT100486123,
  author = {丸山一男},
  title = {プラスチックねじの強度に関する基礎的研究},
  journal = {精密機械},
  year = 1983,
}

@article{CTT100486139,
  author = {丸山一男},
  title = {超音波振動系におけるねじ結合部の特性},
  journal = {日本機械学会論文集(C編)},
  year = 1983,
}

@article{CTT100486151,
  author = {丸山一男},
  title = {電気標準用ボビンのピッチ精度測定},
  journal = {精密機械},
  year = 1983,
}

@article{CTT100486159,
  author = {丸山一男},
  title = {VDI2230高強度ねじ結合の体系的計算法第2版(共訳)},
  journal = {日本ねじ研究協会},
  year = 1982,
}

@article{CTT100486078,
  author = {丸山一男},
  title = {ねじ締結体の設計システム(第1報,強度設計プログラムの開発)},
  journal = {精密機械},
  year = 1982,
}

@article{CTT100486120,
  author = {丸山一男},
  title = {ねじ締結体の変形解析(円板を一組のボルト・ナットで締め付ける場合)},
  journal = {精密機械},
  year = 1982,
}

@article{CTT100486122,
  author = {丸山一男},
  title = {ねじ締結体の設計システム(第2報,連接棒ボルトの応力解析)},
  journal = {精密機械},
  year = 1982,
}

@article{CTT100486121,
  author = {KAZUO MARUYAMA},
  title = {Analysis of the Deformation in Bolted Joints(The Case where a Cylindlical Plate is Fastened by a Set of Bolt and Nut)},
  journal = {Bull. P. M. E. (T. I. T. )},
  year = 1981,
}

@article{CTT100486137,
  author = {丸山一男},
  title = {高強度ボルトの締付管理に関する研究},
  journal = {精密機械},
  year = 1981,
}

@article{CTT100486118,
  author = {丸山一男},
  title = {ねじ込みボルトによるねじ締結体の特性について},
  journal = {日本機械学会論文集(C編)},
  year = 1981,
}

@article{CTT100486150,
  author = {KAZUO MARUYAMA},
  title = {Automatic Measurement of the Lead Error of the Gear-Hob},
  journal = {International Symposium on Gearing & Power Transmissions, 1981 Tokyo},
  year = 1981,
}

@article{CTT100486119,
  author = {KAZUO MARUYAMA},
  title = {On characteristics of a bolted joint with a tap bolt},
  journal = {Bull. JSME},
  year = 1981,
}

@article{CTT100486149,
  author = {丸山一男},
  title = {レーザ干渉及び光学的フィーラによるねじリードの自動測定},
  journal = {精密機械},
  year = 1981,
}

@article{CTT100486136,
  author = {KAZUO MARUYAMA},
  title = {Self-loosening of Threaded Joints under Ultrasonic Vibration(On Separating Phenomena between Bearing Surfaces)},
  journal = {Bull. P. M. E. (T. I. T. )},
  year = 1980,
}

@article{CTT100486138,
  author = {KAZUO MARUYAMA},
  title = {A Study on Tightening Control Methods for High Strength Bolts},
  journal = {Proceedings of the 4th International Conference on Production Engineering Tokyo 1980},
  year = 1980,
}

@article{CTT100486075,
  author = {KAZUO MARUYAMA},
  title = {Automatic Measurement of Screw Lead by Laser Interferometer and Optical feeler},
  journal = {Proceedings of the 4th International Conference on Production Engineering Tokyo},
  year = 1980,
}

@article{CTT100486134,
  author = {KAZUO MARUYAMA},
  title = {Self-loosening of Threaded Joints under Ultrasonic Vibration(Evaluation of Tightening Condition)},
  journal = {Bull. P. M. E. (T. I. T. )},
  year = 1980,
}

@article{CTT100486113,
  author = {KAZUO MARUYAMA},
  title = {The Force Ratio of Bolted Joints(The Case where Clamped Parts are Flanges)},
  journal = {Bull. JSME},
  year = 1979,
}

@article{CTT100486135,
  author = {丸山一男},
  title = {超音波振動によるねじのゆるみ(座面の分離現象)},
  journal = {精密機械},
  year = 1979,
}

@article{CTT100486133,
  author = {丸山一男},
  title = {超音波振動によるねじのゆるみ(締結状態の評価)},
  journal = {精密機械},
  year = 1979,
}

@article{CTT100486117,
  author = {KAZUO MARUYAMA},
  title = {On the Improvement of Fatigue Strength of High Strength Bolts},
  journal = {Bull. P. M. E. (T. I. T. )},
  year = 1979,
}

@article{CTT100486116,
  author = {丸山一男},
  title = {高強度ボルトの疲れ強さ向上について},
  journal = {精密機械},
  year = 1979,
}

@article{CTT100486112,
  author = {丸山一男},
  title = {ねじ締結体の内力係数(被締結体がフランジの場合)},
  journal = {日本機械学会論文集},
  year = 1978,
}

@article{CTT100486110,
  author = {丸山一男},
  title = {内燃機関シリンダヘッド締め付けボルトの荷重解析},
  journal = {日本機械学会論文集},
  year = 1978,
}

@article{CTT100486111,
  author = {KAZUO MARUYAMA},
  title = {Analysis of Load in the Cylinder Head Bolts of an Internal Combustion Engine},
  journal = {Bull. JSME},
  year = 1978,
}

@article{CTT100486114,
  author = {丸山一男},
  title = {疲れ強さを向上させるねじ山形に関する研究},
  journal = {精密機械},
  year = 1978,
}

@article{CTT100486115,
  author = {KAZUO MARUYAMA},
  title = {Investigation on the Screw Threads Profile to Improve the Fatigue Strength},
  journal = {Bull. P. M. E. (T. I. T. )},
  year = 1978,
}

@article{CTT100486131,
  author = {丸山一男},
  title = {ねじ締付管理方法の比較},
  journal = {精密機械},
  year = 1978,
}

@article{CTT100486132,
  author = {KAZUO MARUYAMA},
  title = {Comparison of Control Methods for Screw Tightening},
  journal = {Bull. P. M. E. (T. I. T. )},
  year = 1978,
}

@article{CTT100486158,
  author = {丸山一男},
  title = {最新機械設計編(分担執筆)},
  journal = {養賢堂},
  year = 1978,
}

@article{CTT100486109,
  author = {KAZUO MARUYAMA},
  title = {The Force Ratio of Bolted Joints(The Case where Clamped Parts are Connecting Rods)},
  journal = {Bull. JSME},
  year = 1977,
}

@article{CTT100486107,
  author = {KAZUO MARUYAMA},
  title = {The Force Ratio of Bolted Joints(The Case where Clamped Parts are Hollow Cylinders)},
  journal = {Bull. JSME},
  year = 1977,
}

@article{CTT100486108,
  author = {丸山一男},
  title = {ねじ締結体の内力係数(被締結体が連接棒の場合)},
  journal = {日本機械学会論文集},
  year = 1977,
}

@article{CTT100486147,
  author = {丸山一男},
  title = {精密ねじ研削に関する研究(ねじ研削における酔歩の原因)},
  journal = {日本機械学会論文集},
  year = 1977,
}

@article{CTT100486148,
  author = {KAZUO MARUYAMA},
  title = {A Study of Precision Thread Grinding(Causes of Drunkenness of a Leadscrew in Thread Grinding)},
  journal = {Bull. JSME},
  year = 1977,
}

@article{CTT100486105,
  author = {KAZUO MARUYAMA},
  title = {Stress Analysis of a Bolt-Nut Joint by the Finite Element Method and the Copper-Electroplating Method(3rd Report, Influence of Pitch Error or Flank Angle Error)},
  journal = {Bull. JSME},
  year = 1976,
}

@article{CTT100486104,
  author = {KAZUO MARUYAMA},
  title = {On the Deformation of the Bolt Head and Nut in a Bolted Joint},
  journal = {Bull. JSME},
  year = 1976,
}

@article{CTT100486106,
  author = {丸山一男},
  title = {ねじ締結体の内力係数(被締結体が中空円筒の場合)},
  journal = {日本機械学会論文集},
  year = 1976,
}

@article{CTT100486157,
  author = {丸山一男},
  title = {VDI2230高強度ねじ結合の体系的計算法(共訳)},
  journal = {日本ねじ研究協会},
  year = 1976,
}

@article{CTT100486076,
  author = {丸山一男},
  title = {レーザ干渉ねじリード測定機の実用化},
  journal = {精密機械},
  year = 1975,
}

@article{CTT100486146,
  author = {KAZUO MARUYAMA},
  title = {On the Industrialization of Screw Lead Measuring Machine with Laser Interferometer},
  journal = {Bull. T. I. T.},
  year = 1975,
}

@article{CTT100486102,
  author = {丸山一男},
  title = {ねじ締結における被締め付け物のばね定数について},
  journal = {日本機械学会論文集},
  year = 1975,
}

@article{CTT100486103,
  author = {KAZUO MARUYAMA},
  title = {On Spring Constant of Connected Parts in Bolted Joints},
  journal = {Bull. JSME},
  year = 1975,
}

@article{CTT100486080,
  author = {丸山一男},
  title = {ねじ結合におけるボルト頭部およびナットの変形について},
  journal = {日本機械学会論文集},
  year = 1975,
}

@article{CTT100486077,
  author = {丸山一男},
  title = {有限要素法および銅めっき法によるねじ結合体の応力解析(第3報)},
  journal = {日本機械学会論文集},
  year = 1975,
}

@article{CTT100486101,
  author = {KAZUO MARUYAMA},
  title = {Stress Analysis of a Bolt-Nut Joint by the Finite Element Method and the Copper-Electroplating Method(2nd Report, Stress at the Root of a Bolt Thread under a Tensile Load)},
  journal = {Bull. JSME},
  year = 1974,
}

@article{CTT100486079,
  author = {丸山一男},
  title = {有限要素法および銅めっき法によるねじ結合体の応力解析(第2報,引張荷量を受けるボルト谷底の応力)},
  journal = {日本機械学会論文集},
  year = 1973,
}

@article{CTT100486100,
  author = {KAZUO MARUYAMA},
  title = {Stress Analysis of a Bolt-Nut Joint by the Finite Element Method and the Copper-Electroplating Method(1st Report, Stress at the Root of a V-Grooved Rod under a Tensile Load)},
  journal = {Bull. JSME},
  year = 1973,
}

@article{CTT100486099,
  author = {丸山一男},
  title = {有限要素法および銅めっき法によるねじ結合体の応力解析(第1報,引張荷重を受ける環状Vみぞ底の応力)},
  journal = {日本機械学会論文集},
  year = 1972,
}

@article{CTT100486145,
  author = {KAZUO MARUYAMA},
  title = {On a Dynamic Measuring Method of the Rotation Error of the Master Worm-Wheel of the Gear-Hobbing-Machine},
  journal = {Bull. T. I. T.},
  year = 1968,
}

@article{CTT100486144,
  author = {丸山一男},
  title = {ホブ盤ワークテーブルの回転むらの動的測定法に関する研究},
  journal = {日本機械学会論文集},
  year = 1968,
}

@misc{CTT100595537,
  author = {丸山一男},
  title = {ねじ結合体の応力に関する研究},
  year = 1976,
}



@phdthesis{CTT100595537,
  author = {丸山一男},
  title = {ねじ結合体の応力に関する研究},
  school = {東京工業大学},
  year = 1976,
}