@book{CTT100692645,
  author = {稗田純子 and 新家光雄},
  title = {2-3-4 生体用β型チタン合金の力学的特性に及ぼすTiBの影響},
  publisher = {日本金属学会},
  year = 2014,
}

@book{CTT100692646,
  author = {稗田純子 and 新家光雄},
  title = {4-4-1溶体化処理を施したAg–Pd–Au–Cu 合金中におけるL10型β′規則相の形成と硬化挙動},
  publisher = {日本金属学会},
  year = 2014,
}

@article{CTT100775993,
  author = {Jumpei Nishikawa and Naoki Sugihara and Masayuki Nakano and Junko Hieda and Naoto Ohtake and Hiroki Akasaka},
  title = {Effect of Si incorporation on corrosion resistance of hydrogenated amorphous carbon film},
  journal = {Diamond and Related Materials},
  year = 2018,
}

@article{CTT100772366,
  author = {Junko Hieda and Akira Sakaguchi and Masayuki Nakano and Hiroki Akasaka and Naoto Ohtake},
  title = {Relationships between surface energy and charge of surface-modified titanium and HAp formation},
  journal = {Applied Surface Science},
  year = 2018,
}

@article{CTT100741723,
  author = {Shahira Liza and Junko Hieda and Hiroki Akasaka and Naoto Ohtake and Yusuke Tsutsumi and Akiko Nagai and Takao Hanawa},
  title = {Deposition of boron doped DLC films on TiNb and characterization of their mechanical properties and blood compatibility},
  journal = {Science and Technology of Advanced Materials},
  year = 2017,
}

@article{CTT100692343,
  author = {Junko Hieda and Mitsuo Niinomi and Masaaki Nakai and Ken Cho},
  title = {In vitro biocompatibility of Ti–Mg alloys fabricated by direct current magnetron sputtering},
  journal = {Materials Science and Engineering: C},
  year = 2015,
}

@article{CTT100692347,
  author = {Akira Sakaguchi and Masayuki Nakano and Junko Hieda and Naoto Ohtake and Hiroki Akasaka},
  title = {Dependence of ion concentration in simulated body fluid on apatite precipitation on titania surface},
  journal = {Applied Surface Science},
  year = 2015,
}

@article{CTT100692341,
  author = {Yilmazer  Hakan and Mitsuo niinomi and Ken Cho and Masaaki Nakai and Junko Hieda and Shigeo Sato and Yoshikazu Todaka},
  title = {Microstructural evolution of precipitation-hardened beta-type titanium alloy through high-pressure torsion},
  journal = {Acta Materialia},
  year = 2014,
}

@article{CTT100692342,
  author = {Ken Cho and Mitsuo Niinomi and Masaaki Nakai and Junko Hieda and Pedro Fernandes Santos and Yoshinori Itoh and Masahiko Ikeda},
  title = {Microstructures, and Biocompatibility of Low-Cost β-Type Ti-Mn Alloys for Biomedical Application},
  journal = {Biomaterials Science: Processing, Properties and Applications IV: Ceramic Transactions},
  year = 2014,
}

@article{CTT100692336,
  author = {Huihong  Liu and Mitsuo Niinomi and Masaaki Nakai and Junko Hieda and Ken Cho},
  title = {Changeable Young's modulus with large elongation-to-failure in beta-type titanium alloys for spinal fixation applications},
  journal = {Scripta Materialia},
  year = 2014,
}

@article{CTT100692334,
  author = {Huihong Liu and Mitsuo Niinomi and Masaaki Nakai and Junko Hieda and Ken Cho},
  title = {Bending springback behavior related to deformation-induced phase transformations in Ti-12Cr and Ti-29Nb-13Ta-4.6Zr alloys for spinal fixation applications},
  journal = {Journal of the Mechanical Behavior of Biomedical Materials},
  year = 2014,
}

@article{CTT100692338,
  author = {Yonghwan Kim and Mitsuo Niinomi and Junko Hieda and Masaaki Nakai and Ken Cho and Hisao Fukui},
  title = {Hardening behavior after high-temperature solution treatment of Ag-20Pd-12Au-xCu alloys with different Cu contents for dental prosthetic restorations},
  journal = {Journal of the Mechanical Behavior of Biomedical Materials},
  year = 2014,
}

@article{CTT100679010,
  author = {Yonghwan Kim and Mitsuo Niinomi and Junko Hieda and Masaaki Nakai and Ken Cho and Hisao Fukui},
  title = {Contribution of β' and β precipitates to hardening in as-solutionized Ag-20Pd-12Au-14.5Cu alloys for dental prosthesis applications},
  journal = {Materials Science and Engineering C},
  year = 2014,
}

@article{CTT100678967,
  author = {Yonghwan Kim and Mitsuo Niinomi and Junko Hieda and Masaaki Nakai and Ken Cho and Hisao Fukui},
  title = {Precipitation of β' phase and hardening in dental-casting Ag–20Pd–12Au–14.5Cu alloys subjected to aging treatments},
  journal = {Materials science and engineering C},
  year = 2014,
}

@article{CTT100678960,
  author = {Junko Hieda and Mitsuo Niinomi and Masaaki Nakai and Ken Cho and Tomoyoshi Mohri and Takao Hanawa},
  title = {Adhesive strength of medical polymer on anodic oxide nanostructures fabricated on biomedical β-type titanium alloy},
  journal = {Materials Science and Engineering C},
  year = 2014,
}

@article{CTT100678968,
  author = {Huihong Liu and Mitsuo Niinomi and Masaaki Nakai and Junko Hieda and Ken Cho},
  title = {Deformation-induced changeable Young's modulus with high strength in beta-type Ti-Cr-O alloys for spinal fixture},
  journal = {Journal of the Mechanical Behavior of Biomedical Materials},
  year = 2014,
}

@article{CTT100678970,
  author = {Masaaki Nakai and Mitsuo Niinomi and Junko Hieda and Ken Cho and Yuya Nagasawa and Takashi Konnno and Yoshinori Ito and Yoshio Itsumi and Hideto Oyama},
  title = {Reduction in anisotropy of mechanical properties of coilable (α+β)-type titanium alloy thin sheet through simple heat treatment for use in next-generation aircraft applications},
  journal = {Materials Science and Engineering A},
  year = 2014,
}

@article{CTT100692332,
  author = {Mitsuo Niinomi and Masaaki Nakai and Junko Hieda and Ken Cho and Toshihiro Kasuga and Takashi Goto and Tomokazu Hattori and Takao Hanawa},
  title = {A review of surface modification of a novel low modulus β-type titanium alloy for biomedical applications},
  journal = {International Journal of Surface Science and Engineering},
  year = 2014,
}

@article{CTT100678971,
  author = {Tatsuru Shirafuji and Yohei Noguchi and Taibou Yamamoto and Junko Hieda and Nagahiro Saito and Osamu Takai and Akiharu Tsuchimoto and Kazuhiro Nojima and Youji Okabe},
  title = {Functionalization of Multiwalled Carbon Nanotubes by Solution Plasma Processing in Ammonia Aqueous Solution and Preparation of Composite Material with Polyamide 6},
  journal = {JPN. J. APPL. PHYS.},
  year = 2013,
}

@article{CTT100678972,
  author = {Ken Cho and Mitsuo Niinomi and Masaaki Nakai and Junko Hieda and Ryota Kanekiyo},
  title = {Improvement of Tensile and Fatigue Properties of beta-Titanium Alloy while Maintaining Low Young's Modulus through Grain Refinement and Oxygen Addition},
  journal = {Materials Transactions},
  year = 2013,
}

@article{CTT100678975,
  author = {Qiang Li and Mitsuo Niinomi and Junko Hieda and Masaaki Nakai and Ken Cho},
  title = {Deformation-induced ω phase in modified Ti–29Nb–13Ta–4.6Zr alloy by Cr addition},
  journal = {Acta Biomaterialia},
  year = 2013,
}

@article{CTT100678973,
  author = {Ken Cho and Mitsuo Niinomi and Masaaki Nakai and Junko Hieda and Xiaojie Tao},
  title = {Effects of Alloying Elements on the HAp Formability on Ti Alloys after Alkali Treatment},
  journal = {Materials Transactions},
  year = 2013,
}

@article{CTT100678974,
  author = {Junko Hieda and Mitsuo Niinomi and Masaaki Nakai and Ken Cho},
  title = {Effect of Oxide Particles Formed through Addition of Rare-Earth  Metal on Mechanical Properties of Biomedical β-Type Titanium Alloy},
  journal = {Materials Transactions},
  year = 2013,
}

@article{CTT100678977,
  author = {Hakan Yilmazer and Mitsuo Niinomi and Masaaki Nakai and Ken Cho and Junko Hieda and Yoshikazu Todaka and T. Miyazaki},
  title = {Mechanical properties of a medical beta-type titanium alloy with specific microstructural evolution through high-pressure torsion},
  journal = {Materials science and engineering C},
  year = 2013,
}

@article{CTT100678976,
  author = {Junko Hieda and Mitsuo Niinomi and Masaaki Nakai and Hiroyuki Kamura and Harumi Tsutsumi and Takao Hanawa},
  title = {Improvement of adhesive strength of segmented polyurethane on Ti–29Nb–13Ta–4.6Zr alloy through H2O2 treatment for biomedical applications},
  journal = {Journal of Biomedical Materials Research Part B: Applied Biomaterials},
  year = 2013,
}

@article{CTT100678978,
  author = {Masaaki Nakai and Mitsuo Niinomi and Junko Hieda and Hakan Yilmazer and Yoshikazu Todaka},
  title = {Heterogeneous grain refinement of biomedical Ti-29Nb-13Ta-4.6Zr alloy through high-pressure torsion},
  journal = {Scientia Iranica},
  year = 2013,
}

@article{CTT100679011,
  author = {Ken Cho and Niinomi Mitsuo and Masaaki Nakai and Junko Hieda and Yuuki Kawasaki},
  title = {Development of High Modulus Ti-Fe-Cu Alloys for Biomedical Applications},
  journal = {Materials Transactions},
  year = 2013,
}

@article{CTT100678998,
  author = {Junko Hieda and Mitsuo Niinomi and Masaaki Nakai and Ken Cho and Tatsuya Gozawa and Hirokazu Katsui and Rong Tu and Takashi Goto},
  title = {Enhancement of adhesive strength of hydroxyapatite films on Ti–29Nb–13Ta–4.6Zr by surface morphology control},
  journal = {Journal of the Mechanical Behavior of Biomedical Materials},
  year = 2013,
}

@article{CTT100679012,
  author = {Masaaki Nakai and Mitsuo Niinomi and Junko Hieda and Ken Cho and Toshikazu Akahori and Kazuhiro Hayashi and Yoshio Itsumi and Shogo Murakami and Hideto Oyama},
  title = {Tensile and Fatigue Properties of Carbon-Solute-Strengthened (α+β)-Type Titanium Alloy},
  journal = {Materials Transactions},
  year = 2013,
}

@article{CTT100679015,
  author = {Mitsuo Niinomi and Masaaki Nakai and Junko Hieda},
  title = {Development of new metallic alloys for biomedical applications},
  journal = {Acta Biomaterialia},
  year = 2012,
}

@article{CTT100679013,
  author = {椙村豊彦 and 福井壽男 and 新家光雄 and 赤堀俊和 and 仲井正昭 and 金 容煥 and 椙村豊彦 and 福井壽男 and 新家光雄 and 赤堀俊和 and 仲井正昭 and 稗田純子 and 金 容煥},
  title = {市販歯科用金銀パラジウム合金のβ相析出に及ぼす凝固および高温容体化処理の影響},
  journal = {日本歯科理工学会誌},
  year = 2012,
}

@article{CTT100679016,
  author = {Kengo Narita and Mitsuo Niinomi and Masaaki Nakai and Junko Hieda and Kazuya Oribe},
  title = {Specific characteristics of mechanically and biologically compatible titanium alloy rods for use in spinal fixation applications},
  journal = {Materials Letters},
  year = 2012,
}

@article{CTT100679014,
  author = {Masaaki Nakai and Mitsuo Niinomi and Junko Hieda and Toshiya Shibata},
  title = {Microstructures and Mechanical Properties of Ternary Ti-10Cr-(V, Fe, Mo) Alloys with Self-tunable Young’s Moduli for Biomedical Applications},
  journal = {ISIJ International},
  year = 2012,
}

@article{CTT100679017,
  author = {Xingfeng Zhao and Mitsuo Niinomi and Masaaki Nakai and Junko Hieda},
  title = {Effect of Deformation-Induced omega Phase on the Mechanical Properties of Metastable beta-Type Ti-V Alloys},
  journal = {Materials Transactions},
  year = 2012,
}

@article{CTT100679018,
  author = {Xingfeng Zhao and Mitsuo Niinomi and Masaaki Nakai and Junko Hieda and Takuya Ishimoto and Takayoshi Nakano},
  title = {Optimization of Cr content of metastable β-type Ti–Cr alloys with changeable Young’s modulus for spinal fixation applications},
  journal = {Acta Biomaterialia},
  year = 2012,
}

@article{CTT100679019,
  author = {Hakan Yilmazer and Mitsuo Niinomi and Masaaki Nakai and Junko Hieda and Yoshikazu Todaka and Toshikazu Akahori and T. Miyazaki},
  title = {Heterogeneous structure and mechanical hardness of biomedical β-type Ti–29Nb–13Ta–4.6Zr subjected to high-pressure torsion},
  journal = {Journal of the Mechanical Behavior of Biomedical Materials},
  year = 2012,
}

@article{CTT100679020,
  author = {Kengo Narita and Mitsuo Niinomi and Masaaki Nakai and Junko Hieda and Kazuya Oribe},
  title = {Development of thermo-mechanical processing for fabricating highly durable beta-type Ti–Nb–Ta–Zr rod for use in spinal fixation devices},
  journal = {Journal of the Mechanical Behavior of Biomedical Materials},
  year = 2012,
}

@inproceedings{CTT100851714,
  author = {立花孝介 and 村田菜緒 and 金澤誠司 and 高橋克幸 and 稗田純子 and 竹内希 and Oi Lun Li},
  title = {負極性パルスアルゴンプラズマにより 生成された硫酸・亜硫酸イオンラジカルの電子スピン共鳴法による測定},
  booktitle = {第44回静電気学会全国大会予稿集},
  year = 2020,
}

@inproceedings{CTT100753436,
  author = {Shahira Liza and 谷口紘章 and 稗田純子 and 赤坂大樹 and 大竹尚登},
  title = {TiNb合金へのホウ素含有DLC膜の作製とその機械的特性および抗血栓性の評価},
  booktitle = {2017年度精密工学会秋季大会アブストラクト集},
  year = 2017,
}

@inproceedings{CTT100766292,
  author = {Nasa KAWAGOSHI and Masayuki NAKANO and Tetsuya YAMAMOTO and Junko HIEDA and Naoto OHTAKE and Hiroki AKASAKA},
  title = {Deposition of the a-BCN film formed from tri-methylborazine},
  booktitle = {The 16th International Conference on Precision Engineering Abstract book},
  year = 2016,
}

@inproceedings{CTT100766294,
  author = {Jumpei NISHIKAWA and Masayuki NAKANO and Junko HIEDA and Naoto OHTAKE and Hiroki AKASAKA},
  title = {Corrosion Resistance of Si-Doped Amorphous Carbon Film to Nitric Acid},
  booktitle = {The 16th International Conference on Precision Engineering Abstract book},
  year = 2016,
}

@inproceedings{CTT100718722,
  author = {西川純平 and 中野雅之 and 稗田純子 and 大竹尚登 and 赤坂大樹},
  title = {ケイ素添加によるアモルファス炭素系膜の耐食性能の向上},
  booktitle = {第77回応用物理学会秋季学術講演会 CDROM 15a-A26-9},
  year = 2016,
}

@inproceedings{CTT100718721,
  author = {河越 奈沙 and 山本 哲也 and 中野 雅之 and 岩本 喜直 and 松尾 誠 and 稗田 純子 and 大竹 尚登 and 赤坂 大樹},
  title = {トリメチルボラジンからのa-BCN膜の作製},
  booktitle = {第63回応用物理学会春季学術講演会CDROM 20p-H103-15},
  year = 2016,
}

@inproceedings{CTT100718720,
  author = {河越奈沙 and 稗田純子 and 大竹尚登 and 赤坂大樹},
  title = {アモルファス炭素膜の形成したリニアガイドレールの摺動特性評価},
  booktitle = {第２９回ダイヤモンドシンポジウム 講演要綱集},
  year = 2015,
}

@inproceedings{CTT100696651,
  author = {Akira Funahashi and Ryota Takamura and Ikuo Azuma and Eiji Sasamoto and Junko Hieda and Hiroki Akasaka and Naoto Ohtake},
  title = {Large Scale Deposition of DLC Films at Sub-atmospheric Pressure},
  booktitle = {},
  year = 2015,
}

@inproceedings{CTT100696653,
  author = {Shahira Liza Kamis and Junko Hieda and Makoto Matsuo and Yoshinao Iwamoto and Yusuke TsuTsumi and Akiko Nagai and Takao Hanawa and Hiroki Akasaka and Naoto Ohtake},
  title = {パルスプラズマCVD法により作製したa-BC:H膜の血液適合性},
  booktitle = {日本機械学会2015年度年次大会総合プログラム},
  year = 2015,
}

@inproceedings{CTT100718716,
  author = {Jumpei Nishikawa and Masayuki Nakano and Junko Hieda and Naoto Ohtake and Hiroki Akasaka},
  title = {Corrosion resistance of Si-doped amorphous carbon films},
  booktitle = {4th Asian Symposium on Materials and Processing (ASMP2015) CD},
  year = 2015,
}

@inproceedings{CTT100718717,
  author = {Yutaro Suzuki and Junko Hieda and Naoto Ohtake and Hiroki Akasaka},
  title = {Mechanical properties of amorphous carbon films deposited from carbon stable isotope materials},
  booktitle = {4th Asian Symposium on Materials and Processing CDROM},
  year = 2015,
}

@inproceedings{CTT100718719,
  author = {Nasa Kawagoshi and Masayuki Nakano and Junko Hieda and Naoto Ohtake and Hiroki Akasaka},
  title = {Solid lubrication of linear guide sliding surface with diamond-like carbon film},
  booktitle = {Nano Diamond and Nano Carbons2015 USB Proc.},
  year = 2015,
}

@inproceedings{CTT100684320,
  author = {坂口 晃 and 中野雅之 and 稗田純子 and 大竹尚登 and 赤坂大樹},
  title = {表面プラズモン共鳴条件のシフトを利用したチタニア表面でのアパタイト析出評価},
  booktitle = {2015年度精密工学会春季大会アブストラクト集},
  year = 2015,
}

@inproceedings{CTT100685032,
  author = {Junko Hieda},
  title = {Evaluation of hard-tissue compatibility of Ti–Mg alloys fabricated by magnetron sputtering},
  booktitle = {},
  year = 2015,
}

@inproceedings{CTT100692647,
  author = {Junko Hieda and Mitsuo Niinomi and Masaaki Nakai and Ken Cho and Takao Hanawa and Hirokazu Katsui and Rong Tu and Takashi Goto},
  title = {Biomedical surface modification of beta-type titanium alloy for implants with surface morphology control},
  booktitle = {},
  year = 2015,
}

@inproceedings{CTT100699047,
  author = {高橋慧 and 武末江莉 and 松下伸広 and 黒田健介 and 稗田純子 and 生駒俊之 and 新家光雄},
  title = {溶液プロセスでTNTZ合金表面に形成した生体活性ナノ構造セラミック層のIn-vitroおよびIn-vivo評価},
  booktitle = {},
  year = 2015,
}

@inproceedings{CTT100683566,
  author = {E.Takematsu and J.Hieda and M.Niinomi and K.Katsumata and N. Matsushita},
  title = {Bioactive Surface Modification of TNTZ Alloy by Solution Processes},
  booktitle = {},
  year = 2014,
}

@inproceedings{CTT100679008,
  author = {Junko Hieda and Mitsuo Niinomi and Masaaki Nakai and Ken Cho and Tomoyoshi Mohri and Takao Hanawa},
  title = {Biomedical polymer surface modification of beta-type titanium alloy for implants through anodic oxide nanostructures},
  booktitle = {Materials Science Forum},
  year = 2014,
}

@inproceedings{CTT100692648,
  author = {稗田純子 and 新家光雄 and 仲井正昭 and 趙研 and 齊藤今朝美},
  title = {Ti-Mg合金におけるMg濃度と擬似体液へのMgイオンの溶出量との関係},
  booktitle = {},
  year = 2014,
}

@inproceedings{CTT100675767,
  author = {松戸亮 and 武末江莉 and 勝又健一 and 稗田純子 and 新家光雄 and 岡田清 and 松下伸広},
  title = {水熱電気化学法によるTiNbTaZr合金の生体活性化処理},
  booktitle = {},
  year = 2014,
}

@inproceedings{CTT100678979,
  author = {Junko Hieda and Mitsuo Niinomi and Masaaki Nakai and Ken Cho},
  title = {MECHANICAL PROPERTIES OF BIOMEDICAL beta-TYPE TITANIUM ALLOY WITH RARE-EARTH METAL OXIDE PARTICLES FORMED BY RARE-EARTH METAL ADDITION},
  booktitle = {},
  year = 2014,
}

@inproceedings{CTT100679891,
  author = {Junko Hieda and Mitsuo Niinomi1 and Masaaki Nakai and Ken Cho and Tomoyoshi Mohri and Takao Hanawa},
  title = {Improvement of adhesive strength between Ti–29Nb–13Ta–4.6Zr alloy with anodic oxide nanostructures and segmented polyurethane coating},
  booktitle = {},
  year = 2014,
}

@inproceedings{CTT100679892,
  author = {Junko Hieda and Mitsuo Niinomi and Masaaki Nakai and Ken Cho},
  title = {Mechanical properties of biomedical beta-type titanium alloy with yttrium oxide particles formed by yttrium addition},
  booktitle = {},
  year = 2014,
}

@inproceedings{CTT100679908,
  author = {稗田純子 and 新家光雄 and 仲井正昭 and 趙研 and 齊藤今朝美},
  title = {DCマグネトロンスパッタリング法により作製したTi-Mg膜における生理食塩水へのTiおよびMgの溶出量},
  booktitle = {},
  year = 2014,
}

@inproceedings{CTT100679914,
  author = {稗田純子 and 新家光雄 and 仲井正昭 and 趙研 and 且井宏和 and 塗溶 and 後藤孝},
  title = {各種表面処理を施したβ型チタン合金へのハイドロキシアパタイト膜の密着性評価},
  booktitle = {},
  year = 2014,
}

@inproceedings{CTT100679916,
  author = {稗田純子 and 新家光雄 and 仲井正昭 and 趙研 and 齊藤今朝美},
  title = {擬似体液浸漬試験によるチタン-マグネシウム合金のハイドロキシアパタイト形成能の評価},
  booktitle = {},
  year = 2014,
}

@inproceedings{CTT100679918,
  author = {稗田純子 and 新家光雄 and 仲井正昭 and 趙研 and 金容煥 and 福井壽男},
  title = {高温溶体化処理を施した銀パラジウム金銅合金における銅の濃度と微細組織および力学的特性との関係},
  booktitle = {},
  year = 2014,
}

@inproceedings{CTT100679920,
  author = {稗田純子 and 新家光雄 and 仲井正昭 and 趙研 and 塙隆夫},
  title = {ナノ微細構造を利用したTi-29Nb-13Ta-4.6Zr合金と医療用高分子膜との密着性改善},
  booktitle = {},
  year = 2014,
}

@inproceedings{CTT100679922,
  author = {稗田純子 and 新家光雄 and 仲井正昭 and 趙研 and 齊藤今朝美},
  title = {Ti-Mg合金における疑似体液への各種金属イオンの溶出量},
  booktitle = {},
  year = 2014,
}

@inproceedings{CTT100679924,
  author = {稗田純子 and 新家光雄 and 仲井正昭 and 趙研 and 齊藤今朝美},
  title = {擬似体液浸漬によるTi-xMg合金薄膜の硬組織適合性評価},
  booktitle = {},
  year = 2014,
}

@inproceedings{CTT100679926,
  author = {稗田純子 and 新家光雄 and 仲井正昭 and 趙研 and 齊藤今朝美 and 塙隆夫},
  title = {高生物学的生体適合性を有する生体用チタン合金の開発},
  booktitle = {},
  year = 2014,
}

@inproceedings{CTT100679928,
  author = {稗田純子 and 新家光雄 and 仲井正昭 and 趙研 and 塙隆夫},
  title = {陽極酸化による微細構造をもつβ型チタン合金上に作製した医療用高分子膜の密着強度},
  booktitle = {},
  year = 2014,
}

@inproceedings{CTT100679929,
  author = {稗田純子 and 新家光雄 and 仲井正昭 and 趙研 and 塙隆夫},
  title = {生体用β型チタン合金上に作製したナノ微細構造膜と医療用高分子との密着性評価},
  booktitle = {},
  year = 2014,
}

@inproceedings{CTT100679930,
  author = {稗田純子 and 新家光雄 and 仲井正昭 and 趙研 and 松原綾香},
  title = {擬似生体環境下におけるハイドロキシアパタイト膜の密着性評価},
  booktitle = {},
  year = 2014,
}

@inproceedings{CTT100675585,
  author = {E.Takematsu and J.Hieda and M.Niinomi and K.Katsumata and N. Matsushita},
  title = {Morphology Control of TNTZ Alloy Using Hydrothermal Process for Apatite Induction},
  booktitle = {},
  year = 2014,
}

@inproceedings{CTT100679889,
  author = {Junko Hieda and Mitsuo Niinomi and Masaaki Nakai and Ken Cho},
  title = {Biomedical polymer surface modification of beta-type titanium alloy for implants through anodic oxide nanostructures},
  booktitle = {},
  year = 2013,
}