@article{CTT100841569,
  author = {Masahito Ueda and Shun Kishimoto and Masao Yamawaki and Ryosuke Matsuzaki and Akira Todoroki and Yoshiyasu Hirano and Antoine Le Duigou},
  title = {3D Compaction Printing of a Continuous Carbon Fiber Reinforced Thermoplastic},
  journal = {Composites Part A},
  year = 2020,
}

@article{CTT100841574,
  author = {轟章 and 勝俣凌 and 上田政人 and 平野義鎭 and 松崎亮介},
  title = {自己センシングを有する3DプリントサンドイッチCFRP構造},
  journal = {強化プラスチックス},
  year = 2020,
}

@article{CTT100841575,
  author = {A. Todoroki and T. Oasada and yoshihiro mizutani and Y. Suzuki and M. Ueda and R. Matsuzaki and Y. Hirano},
  title = {Tensile Property Evaluations of 3D Printed Continuous Carbon Fiber Reinforced Thermoplastic Composites},
  journal = {Advanced Composite Materials},
  year = 2020,
}

@article{CTT100841572,
  author = {Ryosuke Matsuzaki and Kenta Mitsui and Yoshiyasu Hirano and Akira Todoroki and Yoshiro Suzuki},
  title = {Optimization of curvilinear fiber orientation of composite plates and its experimental validation},
  journal = {Composite Structures},
  year = 2020,
}

@inproceedings{CTT100735803,
  author = {Yoichiro Koga and Frank van der Klift and Akira Todoroki and Masahito Ueda and Yoshiyasu Hirano and Ryosuke Matsuzaki},
  title = {The Printing Process of 3D Printer for Continuous CFRTP},
  booktitle = {SAMPE Journal},
  year = 2016,
}

@inproceedings{CTT100735801,
  author = {古賀洋一郎 and Frank van der Klift and 轟章 and 上田政人 and 平野義鎮 and 松崎亮介},
  title = {3D-printed composites part1; Evaluation of 3D printing process of continuous CFRTP},
  booktitle = {日本複合材料会議講演論文集},
  year = 2016,
}

@inproceedings{CTT100735802,
  author = {Frank van der Klift and Yoichiro Koga and Akira Todoroki and Masahito Ueda and Yoshiyasu Hirano and Ryosuke Matsuzaki},
  title = {3D-printed composites part2; Evaluation of the strength of 3D-printed continuous CFRTP specimens},
  booktitle = {},
  year = 2016,
}

@inproceedings{CTT100735800,
  author = {Yoichiro Koga and Frank van der Klift and Akira Todoroki and Masahito Ueda and Yoshiyasu Hirano and Ryosuke Matsuzaki},
  title = {The printing process of 3D printer for continuous carbon fiber reinforced plastics},
  booktitle = {},
  year = 2016,
}

@misc{CTT100883082,
  author = {Xiaoyong Tian and Akira Todoroki and Tengfei Liu and Lingling Wu and Zhanghao Hou and Masahiro Ueda and Yoshiyasu Hirano and Ryosuke Matsuzaki and Koichi Mizukami and Keisuke Iizuka and Andrei V. Malakhov and Alexander N. Polilov and Dichen Li and Bingheng Lu},
  title = {3D Printing of Continuous Fiber Reinforced Polymer Composites: Development, Application, and Prospective},
  year = 2022,
}