@book{CTT100826338,
  author = {中川佑貴},
  title = {3Dプリンタ用材料開発と造形物の高精度化},
  publisher = {(株)技術情報協会},
  year = 2020,
}

@article{CTT100876270,
  author = {Fumihisa Nagashima and Yuki Nakagawa and MASAHIKO YOSHINO},
  title = {Numerical Analysis of Subgrain Formation during Metal Cutting and Rolling Based on the Crystal Plasticity Theory},
  journal = {Special issue of “Developments in modelling and simulation of material forming, a focus on Japan, South Korea and China”, the International Journal of Materials Forming},
  year = 2022,
}

@article{CTT100846282,
  author = {Ken-ichiro Mori and Tomoya Kaido and Yasutaka Suzuki and Yuki Nakagawa and Yohei Abe},
  title = {Combined process of hot stamping and mechanical joining for producing ultra-high strength steel patchwork components},
  journal = {Journal of Manufacturing Processes},
  year = 2020,
}

@article{CTT100854509,
  author = {F Nagashima and Y Nakagawa and M Yoshino},
  title = {Influence of Severe Plastic Deformation on Static Recrystallization Microstructure of Pure Iron},
  journal = {Metals},
  year = 2020,
}

@article{CTT100854512,
  author = {H Shen and Y Nakagawa and M Yoshino},
  title = {Subtractive transfer printing process for rapid fabrication of Au nano/micro structures on a polymer substrate},
  journal = {Journal of Micromechanics and Microengineering},
  year = 2020,
}

@article{CTT100821352,
  author = {Yuki Nakagawa and Ken-ichiro Mori and Yasutaka Suzuki and Yuki Shimizu},
  title = {Tailored tempering without die heating in hot stamping of ultra-high strength steel parts},
  journal = {Materials & Design},
  year = 2020,
}

@article{CTT100875414,
  author = {Abdallah  Abdelkawy, and MASAHIKO YOSHINO and Yuki Nakagawa},
  title = {EFFECT OF TOOL RAKE ANGLE AND CRYSTAL ORIENTATION ON DUCTILE MODE CUTTING OF HARD/BRITTLE MATERIALS},
  journal = {International Journal of Automation Technology, Special Iissue for Novel Fabrication Processes for Tailored Functional Materials and Surface},
  year = 2020,
}

@article{CTT100875413,
  author = {Abdallah  Abdelkawy, and MASAHIKO YOSHINO and Yuki Nakagawa},
  title = {EFFECT OF TOOL RAKE ANGLE AND CRYSTAL ORIENTATION ON DUCTILE MODE CUTTING OF HARD/BRITTLE MATERIALS},
  journal = {International Journal of Automation Technology, Special Iissue for Novel Fabrication Processes for Tailored Functional Materials and Surface},
  year = 2020,
}

@article{CTT100809164,
  author = {Yuki Nakagawa and Ken-ichiro Mori and Tomoyoshi Maeno and Ryo Umemiya},
  title = {Delayed cracking in hot stamping with hot trimming for ultra-high strength steel components},
  journal = {The International Journal of Advanced Manufacturing Technology},
  year = 2019,
}

@article{CTT100809167,
  author = {Daixiu Wei and Yuichiro Koizumi and Makoto Nagasako and Yusuke Kubota and Tomoyuki Aoyagi and Yuki Nakagawa and Masahiko Yoshino and Akihiko Chiba and Hidemi Kato},
  title = {Introducing dislocations locally in Al-supersaturated α2-Ti3Al single crystal via nanoscale wedge indentation},
  journal = {Intermetallics},
  year = 2019,
}

@article{CTT100809165,
  author = {Masahiko Yoshino and Yusuke Kubota and Yuki Nakagawa and Motoki Terano},
  title = {Efficient Fabrication Process of Ordered Metal Nanodot Arrays for Infrared Plasmonic Sensor},
  journal = {Micromachines},
  year = 2019,
}

@article{CTT100778621,
  author = {中川佑貴 and 森謙一郎 and 前野智美 and 梅宮涼},
  title = {超高強度鋼部材のホットスタンピングにおける切口面性状および機械的特性に及ぼすホットトリミング条件の影響},
  journal = {塑性と加工},
  year = 2018,
}

@article{CTT100772447,
  author = {Yuki Nakagawa and Ken-ichiro Mori and Tomoyoshi Maeno},
  title = {Springback-free mechanism in hot stamping of ultra-high-strength steel parts and deformation behaviour and quenchability for thin sheet},
  journal = {International Journal of Advanced Manufacturing Technology},
  year = 2018,
}

@article{CTT100772448,
  author = {Yuki Nakagawa and Ken-ichiro Mori and Tomoyoshi Maeno},
  title = {3D printing of carbon fibre-reinforced plastic parts},
  journal = {International Journal of Advanced Manufacturing Technology},
  year = 2017,
}

@inproceedings{CTT100898931,
  author = {Rei Kobayashi and MASAHIKO YOSHINO and Yuki Nakagawa},
  title = {Optimization of bullseye structure on a metal surface to obtain localized enhancement of incident light},
  booktitle = {Proceedings of ICPE2022},
  year = 2023,
}

@inproceedings{CTT100898956,
  author = {佐藤寛恭 and 中前圭人 and 中川佑貴 and 南條博 and 赤上陽一 and 中村竜太 and 久住孝幸 and 吉野雅彦},
  title = {病理診断試料の薄切用ミクロトーム刃の耐久性試験},
  booktitle = {精密工学会学術講演会講演論文集},
  year = 2023,
}

@inproceedings{CTT100879405,
  author = {廣政航介 and 吉野雅彦 and 山中晃徳 and 中川佑貴},
  title = {ベイズ最適化を用いた純鉄の結晶塑性パラメータの決定},
  booktitle = {第72回塑性加工連合講演会講演論文集},
  year = 2022,
}

@inproceedings{CTT100879406,
  author = {吉野雅彦 and 永島史悠 and 中川佑貴},
  title = {塑性変形様式が多結晶粒内の微細変形組織に及ぼす影響},
  booktitle = {第72回塑性加工連合講演会講演論文集},
  year = 2022,
}

@inproceedings{CTT100879409,
  author = {安部歩夢 and 吉野雅彦 and 廣政航介 and 山中晃徳 and 中川佑貴},
  title = {単結晶純鉄の結晶塑性パラメータ推定法の検討},
  booktitle = {2022年度塑性加工春季講演会講演論文集},
  year = 2022,
}

@inproceedings{CTT100879410,
  author = {李原 and 吉野雅彦 and 中川佑貴 and 山中晃徳},
  title = {純鉄材の結晶粒微細化に及ぼす剪断塑性ひずみの効果},
  booktitle = {2022年度塑性加工春季講演会講演論文集},
  year = 2022,
}

@inproceedings{CTT100879407,
  author = {佐藤寛恭 and 吉野雅彦 and 北村峻祐 and 中川佑貴 and 南條博 and 赤上陽一 and 中村竜太 and 久住孝幸},
  title = {病理診断試料の薄切における切削力および薄切片厚さの検討},
  booktitle = {2022年度精密工学会春季大会講演論文集},
  year = 2022,
}

@inproceedings{CTT100875403,
  author = {Yusuke Kubota and MASAHIKO YOSHINO and Yuki Nakagawa and 長尾忠昭},
  title = {Development of new type of SERS substrate fabricated by NPF method},
  booktitle = {},
  year = 2022,
}

@inproceedings{CTT100875402,
  author = {Fumihisa Nagashima and MASAHIKO YOSHINO and Yuki Nakagawa},
  title = {Application of metal cutting process to improvement of high performance stainless steel},
  booktitle = {},
  year = 2022,
}

@inproceedings{CTT100875406,
  author = {Yuki Nakagawa and MASAHIKO YOSHINO and Ayumu Abe},
  title = {Combined Process of 3D Printing and Joining with Metal by Fused Deposition Modelling of Plastic Parts},
  booktitle = {},
  year = 2022,
}

@inproceedings{CTT100875404,
  author = {MASAHIKO YOSHINO and Yusuke Kubota and Yuki Nakagawa and Takatoki Yamamoto and 長尾忠昭},
  title = {SERS effect of rhombic Au film structure fabricated by NPF method},
  booktitle = {},
  year = 2022,
}

@inproceedings{CTT100876305,
  author = {吉野雅彦 and 永島史悠 and 中川佑貴 and 寺野元規},
  title = {バニシ加工による鉄板表面の結晶粒微細化},
  booktitle = {},
  year = 2021,
}

@inproceedings{CTT100878394,
  author = {北村峻祐 and 吉野雅彦 and 丸山祐 and 中西将也 and 中川佑貴 and 南條博 and 赤上陽一 and 中村竜太 and 久住孝幸},
  title = {病理診断のための薄切片厚さの高精度化法の検討},
  booktitle = {講演論文集},
  year = 2021,
}

@inproceedings{CTT100876289,
  author = {廣政航介 and 山中晃徳 and 中川佑貴 and 吉野雅彦},
  title = {単結晶純鉄の変形挙動に対する結晶方位の影響},
  booktitle = {2021年度塑性加工春季講演会 講演論文集},
  year = 2021,
}

@inproceedings{CTT100876285,
  author = {永島史悠 and 吉野雅彦 and 中川佑貴},
  title = {強せん断加工による鉄系材料の結晶粒微細化},
  booktitle = {第71回塑性加工連合講演会 講演論文集},
  year = 2020,
}

@inproceedings{CTT100876283,
  author = {吉野雅彦 and 青柳友之 and 中川佑貴},
  title = {微細エンボス加工による微細金属素子の作製法},
  booktitle = {日本機械学会2020年度年次大会 講演論文集},
  year = 2020,
}

@inproceedings{CTT100876259,
  author = {Fumihisa Nagashima and Yuki Nakagawa and Masahiko Yoshino},
  title = {Study on effects of strong shear strain on recrystallized grain size of pure iron and microstructure control method},
  booktitle = {Procedia Manufacturing},
  year = 2020,
}

@inproceedings{CTT100876258,
  author = {Fumihisa Nagashima and Yuki Nakagawa and Masahiko Yoshino},
  title = {Study on effects of strong shear strain on recrystallized grain size of pure iron and microstructure control method},
  booktitle = {Procedia Manufacturing},
  year = 2020,
}

@inproceedings{CTT100854526,
  author = {Yuki Nakagawa and Ken-ichiro Mori and Michiya Nishikata},
  title = {Hot stamping of non-rectangular steel sheets using resistance heating by local preheating},
  booktitle = {Procedia Manufacturing},
  year = 2020,
}

@inproceedings{CTT100817049,
  author = {MASAHIKO YOSHINO and Ryandanu Priwanta Wuryanjono and Yuki Nakagawa and Motoki Terano},
  title = {Microstructure control of iron sheet surface by combination of burnishing and annealing},
  booktitle = {},
  year = 2020,
}

@inproceedings{CTT100854493,
  author = {Fumihisa Nagashima and Yuki Nakagawa and Motoki Terano and Atsushi  Ito and Siro  Torizuka and MASAHIKO YOSHINO},
  title = {Microstructure Control of Pure Iron by Metal Cutting Technique},
  booktitle = {Procedia Manufacturing},
  year = 2019,
}

@inproceedings{CTT100817050,
  author = {Chang Ye and Yuki Nakagawa and Takatoki Yamamoto and MASAHIKO YOSHINO},
  title = {Development of a Double Layer Metal Nano-structure for the SERS Substrate with NPF and Chemical Etching Process},
  booktitle = {},
  year = 2019,
}

@inproceedings{CTT100817090,
  author = {中西将也 and 吉野雅彦 and 中川佑貴 and 南條博 and 赤上陽一 and 中村竜太},
  title = {病理診断用プレパラート作成のための薄切片の切削機構の検討},
  booktitle = {},
  year = 2019,
}

@inproceedings{CTT100815020,
  author = {中川佑貴 and 森謙一郎 and 吉野雅彦},
  title = {3Dプリンティングとレーザー加熱によって製造されたCFRP部材の強度に及ぼす加工条件の影響},
  booktitle = {第70回塑性加工連合講演会講演論文集},
  year = 2019,
}

@inproceedings{CTT100817085,
  author = {青柳友之 and 吉野雅彦 and 中川佑貴},
  title = {微細エンボス加工による金属薄膜の加工特性の検討},
  booktitle = {},
  year = 2019,
}

@inproceedings{CTT100817086,
  author = {久保田雄介 and 吉野雅彦 and 中川佑貴},
  title = {超微細塑性加工と焼鈍を組み合わせた微細金属構造の作製と光機能デバイスへの応用},
  booktitle = {},
  year = 2019,
}

@inproceedings{CTT100809166,
  author = {Naotaka Nakamura and Ken-ichiro Mori and Yuki Nakagawa and Takahiro Miyachi},
  title = {Effect of contact pressure in die quenching on strength of hot-stamped parts},
  booktitle = {Proceedings of 7th International Conference on Hot Sheet Metal Forming of High-performance Steel},
  year = 2019,
}

@inproceedings{CTT100817084,
  author = {横谷圭亮 and LuoZichao and 山中晃徳 and 吉野雅彦 and 寺野元規 and 中川佑貴 and 駱自超},
  title = {単結晶純鉄の引張試験による結晶内塑性変形特性の検討},
  booktitle = {2019年度塑性加工学会春季講演会講演論文集},
  year = 2019,
}

@inproceedings{CTT100815018,
  author = {中川佑貴 and 森謙一郎 and 吉野雅彦},
  title = {3Dプリンティングされた炭素繊維強化樹脂部品におけるレーザー加熱による高強度化},
  booktitle = {2019年度塑性加工春季講演会講演論文集},
  year = 2019,
}

@inproceedings{CTT100815017,
  author = {中川佑貴 and 西方理也 and 森謙一郎 and 安部洋平},
  title = {非矩形鋼板の通電加熱ホットスタンピングにおける部分前加熱},
  booktitle = {2019年度塑性加工春季講演会講演論文集},
  year = 2019,
}

@inproceedings{CTT100774135,
  author = {中村尚誉 and 森謙一郎 and 中川佑貴 and 藤田智大},
  title = {通電加熱ホットスタンピングにおけるリン酸と超音波洗浄を用いた酸化スケール除去},
  booktitle = {},
  year = 2018,
}

@inproceedings{CTT100774133,
  author = {中川佑貴 and 森謙一郎 and 八嶋悟},
  title = {水没金型を用いた直接水冷ホットスタンピングの複雑形状部品への適用},
  booktitle = {},
  year = 2018,
}

@inproceedings{CTT100772476,
  author = {Yuki Nakagawa and Ken-ichiro Mori and Tomoyoshi Maeno and Yoshitaka Nakao},
  title = {Reduction in holding time at bottom dead centre in hot stamping by water and die quenching},
  booktitle = {Procedia Manufacturing},
  year = 2018,
}

@inproceedings{CTT100772479,
  author = {Yuki Nakagawa and Ken-ichiro Mori and Satoru Yashima and Tomoya Kaido},
  title = {Springback behaviour and quenchability in hot stamping of thick sheets},
  booktitle = {Procedia Manufacturing},
  year = 2018,
}

@inproceedings{CTT100772474,
  author = {中川佑貴 and 森謙一郎 and 鈴木康剛 and 清水悠希},
  title = {搬送中部分冷却を用いた2段ホットスタンピングによるテーラードテンパリング},
  booktitle = {平成30年度塑性加工春季講演会講演論文集},
  year = 2018,
}

@inproceedings{CTT100772454,
  author = {Yuki Nakagawa and Ken-ichiro Mori and Yoshimitsu Murata and Tomoyoshi Maeno},
  title = {Reduction in length of transient region in successive forging of tailored blank for hot stamping of ultra-high strength steel parts},
  booktitle = {Procedia Engineering},
  year = 2017,
}

@inproceedings{CTT100772457,
  author = {Yuki Nakagawa and Ken-ichiro Mori and Tomoyoshi Maeno},
  title = {Prevention of local thinning and springback in hot stamping of thin sheets},
  booktitle = {Key Engineering Materials},
  year = 2016,
}

@inproceedings{CTT100772458,
  author = {Yuki Nakagawa and Tomoyoshi Maeno and Ken-ichiro Mori},
  title = {Forming and quenching behaviours in hot stamping of thin quenchable sheets},
  booktitle = {MATEC Web of Conferences},
  year = 2015,
}

@inproceedings{CTT100772520,
  author = {Ken-ichiro Mori and Tomoyoshi Maeno and Yuki Nakagawa},
  title = {Dieless forming of carbon fibre reinforced plastic parts using 3D printer},
  booktitle = {Procedia Engineering},
  year = 2014,
}